Synonym for `-p --raw`.
endif::git-format-patch[]
+--minimal::
+ Spend extra time to make sure the smallest possible
+ diff is produced.
+
--patience::
Generate a diff using the "patience diff" algorithm.
---stat[=<width>[,<name-width>]]::
- Generate a diffstat. You can override the default
- output width for 80-column terminal by `--stat=<width>`.
- The width of the filename part can be controlled by
- giving another width to it separated by a comma.
+--histogram::
+ Generate a diff using the "histogram diff" algorithm.
+
+--stat[=<width>[,<name-width>[,<count>]]]::
+ Generate a diffstat. By default, as much space as necessary
+ will be used for the filename part, and the rest for the graph
+ part. Maximum width defaults to terminal width, or 80 columns
+ if not connected to a terminal, and can be overridden by
+ `<width>`. The width of the filename part can be limited by
+ giving another width `<name-width>` after a comma. The width
+ of the graph part can be limited by using
+ `--stat-graph-width=<width>` (affects all commands generating
+ a stat graph) or by setting `diff.statGraphWidth=<width>`
+ (does not affect `git format-patch`).
+ By giving a third parameter `<count>`, you can limit the
+ output to the first `<count>` lines, followed by `...` if
+ there are more.
++
+These parameters can also be set individually with `--stat-width=<width>`,
+`--stat-name-width=<name-width>` and `--stat-count=<count>`.
--numstat::
- Similar to `\--stat`, but shows number of added and
+ Similar to `--stat`, but shows number of added and
deleted lines in decimal notation and pathname without
abbreviation, to make it more machine friendly. For
binary files, outputs two `-` instead of saying
number of modified files, as well as number of added and deleted
lines.
---dirstat[=<limit>]::
- Output the distribution of relative amount of changes (number of lines added or
- removed) for each sub-directory. Directories with changes below
- a cut-off percent (3% by default) are not shown. The cut-off percent
- can be set with `--dirstat=<limit>`. Changes in a child directory are not
- counted for the parent directory, unless `--cumulative` is used.
-
---dirstat-by-file[=<limit>]::
- Same as `--dirstat`, but counts changed files instead of lines.
+--dirstat[=<param1,param2,...>]::
+ Output the distribution of relative amount of changes for each
+ sub-directory. The behavior of `--dirstat` can be customized by
+ passing it a comma separated list of parameters.
+ The defaults are controlled by the `diff.dirstat` configuration
+ variable (see linkgit:git-config[1]).
+ The following parameters are available:
++
+--
+`changes`;;
+ Compute the dirstat numbers by counting the lines that have been
+ removed from the source, or added to the destination. This ignores
+ the amount of pure code movements within a file. In other words,
+ rearranging lines in a file is not counted as much as other changes.
+ This is the default behavior when no parameter is given.
+`lines`;;
+ Compute the dirstat numbers by doing the regular line-based diff
+ analysis, and summing the removed/added line counts. (For binary
+ files, count 64-byte chunks instead, since binary files have no
+ natural concept of lines). This is a more expensive `--dirstat`
+ behavior than the `changes` behavior, but it does count rearranged
+ lines within a file as much as other changes. The resulting output
+ is consistent with what you get from the other `--*stat` options.
+`files`;;
+ Compute the dirstat numbers by counting the number of files changed.
+ Each changed file counts equally in the dirstat analysis. This is
+ the computationally cheapest `--dirstat` behavior, since it does
+ not have to look at the file contents at all.
+`cumulative`;;
+ Count changes in a child directory for the parent directory as well.
+ Note that when using `cumulative`, the sum of the percentages
+ reported may exceed 100%. The default (non-cumulative) behavior can
+ be specified with the `noncumulative` parameter.
+<limit>;;
+ An integer parameter specifies a cut-off percent (3% by default).
+ Directories contributing less than this percentage of the changes
+ are not shown in the output.
+--
++
+Example: The following will count changed files, while ignoring
+directories with less than 10% of the total amount of changed files,
+and accumulating child directory counts in the parent directories:
+`--dirstat=files,10,cumulative`.
--summary::
Output a condensed summary of extended header information
of the `--diff-filter` option on what the status letters mean.
--submodule[=<format>]::
- Chose the output format for submodule differences. <format> can be one of
- 'short' and 'log'. 'short' just shows pairs of commit names, this format
- is used when this option is not given. 'log' is the default value for this
- option and lists the commits in that commit range like the 'summary'
- option of linkgit:git-submodule[1] does.
+ Specify how differences in submodules are shown. When `--submodule`
+ or `--submodule=log` is given, the 'log' format is used. This format lists
+ the commits in the range like linkgit:git-submodule[1] `summary` does.
+ Omitting the `--submodule` option or specifying `--submodule=short`,
+ uses the 'short' format. This format just shows the names of the commits
+ at the beginning and end of the range. Can be tweaked via the
+ `diff.submodule` configuration variable.
--color[=<when>]::
Show colored diff.
- The value must be always (the default), never, or auto.
+ The value must be `always` (the default for `<when>`), `never`, or `auto`.
+ The default value is `never`.
+ifdef::git-diff[]
+ It can be changed by the `color.ui` and `color.diff`
+ configuration settings.
+endif::git-diff[]
--no-color::
- Turn off colored diff, even when the configuration file
- gives the default to color output.
- Same as `--color=never`.
+ Turn off colored diff.
+ifdef::git-diff[]
+ This can be used to override configuration settings.
+endif::git-diff[]
+ It is the same as `--color=never`.
--word-diff[=<mode>]::
Show a word diff, using the <mode> to delimit changed words.
ifndef::git-format-patch[]
--check::
- Warn if changes introduce trailing whitespace
- or an indent that uses a space before a tab. Exits with
- non-zero status if problems are found. Not compatible with
- --exit-code.
+ Warn if changes introduce whitespace errors. What are
+ considered whitespace errors is controlled by `core.whitespace`
+ configuration. By default, trailing whitespaces (including
+ lines that solely consist of whitespaces) and a space character
+ that is immediately followed by a tab character inside the
+ initial indent of the line are considered whitespace errors.
+ Exits with non-zero status if problems are found. Not compatible
+ with --exit-code.
endif::git-format-patch[]
--full-index::
digits can be specified with `--abbrev=<n>`.
-B[<n>][/<m>]::
+--break-rewrites[=[<n>][/<m>]]::
Break complete rewrite changes into pairs of delete and
create. This serves two purposes:
+
another file.
-M[<n>]::
+--find-renames[=<n>]::
ifndef::git-log[]
Detect renames.
endif::git-log[]
For following files across renames while traversing history, see
`--follow`.
endif::git-log[]
- If `n` is specified, it is a is a threshold on the similarity
+ If `n` is specified, it is a threshold on the similarity
index (i.e. amount of addition/deletions compared to the
file's size). For example, `-M90%` means git should consider a
delete/add pair to be a rename if more than 90% of the file
hasn't changed.
-C[<n>]::
+--find-copies[=<n>]::
Detect copies as well as renames. See also `--find-copies-harder`.
If `n` is specified, it has the same meaning as for `-M<n>`.
-ifndef::git-format-patch[]
---diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]::
- Select only files that are Added (`A`), Copied (`C`),
- Deleted (`D`), Modified (`M`), Renamed (`R`), have their
- type (i.e. regular file, symlink, submodule, ...) changed (`T`),
- are Unmerged (`U`), are
- Unknown (`X`), or have had their pairing Broken (`B`).
- Any combination of the filter characters (including none) can be used.
- When `*` (All-or-none) is added to the combination, all
- paths are selected if there is any file that matches
- other criteria in the comparison; if there is no file
- that matches other criteria, nothing is selected.
-endif::git-format-patch[]
-
--find-copies-harder::
For performance reasons, by default, `-C` option finds copies only
if the original file of the copy was modified in the same
projects, so use it with caution. Giving more than one
`-C` option has the same effect.
+-D::
+--irreversible-delete::
+ Omit the preimage for deletes, i.e. print only the header but not
+ the diff between the preimage and `/dev/null`. The resulting patch
+ is not meant to be applied with `patch` nor `git apply`; this is
+ solely for people who want to just concentrate on reviewing the
+ text after the change. In addition, the output obviously lack
+ enough information to apply such a patch in reverse, even manually,
+ hence the name of the option.
++
+When used together with `-B`, omit also the preimage in the deletion part
+of a delete/create pair.
+
-l<num>::
The `-M` and `-C` options require O(n^2) processing time where n
is the number of potential rename/copy targets. This
number.
ifndef::git-format-patch[]
+--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]::
+ Select only files that are Added (`A`), Copied (`C`),
+ Deleted (`D`), Modified (`M`), Renamed (`R`), have their
+ type (i.e. regular file, symlink, submodule, ...) changed (`T`),
+ are Unmerged (`U`), are
+ Unknown (`X`), or have had their pairing Broken (`B`).
+ Any combination of the filter characters (including none) can be used.
+ When `*` (All-or-none) is added to the combination, all
+ paths are selected if there is any file that matches
+ other criteria in the comparison; if there is no file
+ that matches other criteria, nothing is selected.
+
-S<string>::
Look for differences that introduce or remove an instance of
<string>. Note that this is different than the string simply
Show the context between diff hunks, up to the specified number
of lines, thereby fusing hunks that are close to each other.
+-W::
+--function-context::
+ Show whole surrounding functions of changes.
+
ifndef::git-format-patch[]
+ifndef::git-log[]
--exit-code::
Make the program exit with codes similar to diff(1).
That is, it exits with 1 if there were differences and
--quiet::
Disable all output of the program. Implies `--exit-code`.
+endif::git-log[]
endif::git-format-patch[]
--ext-diff::
--no-ext-diff::
Disallow external diff drivers.
+--textconv::
+--no-textconv::
+ Allow (or disallow) external text conversion filters to be run
+ when comparing binary files. See linkgit:gitattributes[5] for
+ details. Because textconv filters are typically a one-way
+ conversion, the resulting diff is suitable for human
+ consumption, but cannot be applied. For this reason, textconv
+ filters are enabled by default only for linkgit:git-diff[1] and
+ linkgit:git-log[1], but not for linkgit:git-format-patch[1] or
+ diff plumbing commands.
+
--ignore-submodules[=<when>]::
Ignore changes to submodules in the diff generation. <when> can be
either "none", "untracked", "dirty" or "all", which is the default