msgstr ""
"Project-Id-Version: Git\n"
"Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2016-11-25 22:50+0800\n"
-"PO-Revision-Date: 2016-11-25 22:54+0800\n"
+"POT-Creation-Date: 2017-05-05 09:35+0800\n"
+"PO-Revision-Date: 2017-05-09 21:54+0800\n"
"Last-Translator: Jiang Xin <worldhello.net@gmail.com>\n"
"Language-Team: GitHub <https://github.com/jiangxin/git/>\n"
"Language: zh_CN\n"
msgid "Exiting because of an unresolved conflict."
msgstr "因为存在未解决的冲突而退出。"
-#: advice.c:114 builtin/merge.c:1181
+#: advice.c:114 builtin/merge.c:1185
msgid "You have not concluded your merge (MERGE_HEAD exists)."
msgstr "您尚未结束您的合并（存在 MERGE_HEAD）。"
msgid "patch with only garbage at line %d"
msgstr "补丁文件的第 %d 行只有垃圾数据"
-#: apply.c:2274
+#: apply.c:2265
#, c-format
msgid "unable to read symlink %s"
msgstr "无法读取符号链接 %s"
-#: apply.c:2278
+#: apply.c:2269
#, c-format
msgid "unable to open or read %s"
msgstr "不能打开或读取 %s"
-#: apply.c:2931
+#: apply.c:2922
#, c-format
msgid "invalid start of line: '%c'"
msgstr "无效的行首字符：'%c'"
-#: apply.c:3050
+#: apply.c:3041
#, c-format
msgid "Hunk #%d succeeded at %d (offset %d line)."
msgid_plural "Hunk #%d succeeded at %d (offset %d lines)."
msgstr[0] "块 #%d 成功应用于 %d（偏移 %d 行）"
msgstr[1] "块 #%d 成功应用于 %d（偏移 %d 行）"
-#: apply.c:3062
+#: apply.c:3053
#, c-format
msgid "Context reduced to (%ld/%ld) to apply fragment at %d"
msgstr "上下文减少到（%ld/%ld）以在第 %d 行应用补丁片段"
-#: apply.c:3068
+#: apply.c:3059
#, c-format
msgid ""
"while searching for:\n"
"当查询：\n"
"%.*s"
-#: apply.c:3090
+#: apply.c:3081
#, c-format
msgid "missing binary patch data for '%s'"
msgstr "缺失 '%s' 的二进制补丁数据"
-#: apply.c:3098
+#: apply.c:3089
#, c-format
msgid "cannot reverse-apply a binary patch without the reverse hunk to '%s'"
-msgstr "不能反向应用一个没有至 '%s' 的反向数据块的二进制补丁"
+msgstr "不能反向应用一个缺少到 '%s' 的反向数据块的二进制补丁"
-#: apply.c:3144
+#: apply.c:3135
#, c-format
msgid "cannot apply binary patch to '%s' without full index line"
msgstr "不能在 '%s' 上应用没有完整索引行的二进制补丁"
-#: apply.c:3154
+#: apply.c:3145
#, c-format
msgid ""
"the patch applies to '%s' (%s), which does not match the current contents."
-msgstr "è¡¥ä¸\81å¼\95ç\94¨å\88° '%s' (%s)，但是和当前内容不匹配。"
+msgstr "è¡¥ä¸\81åº\94ç\94¨å\88° '%s'ï¼\88%sï¼\89，但是和当前内容不匹配。"
-#: apply.c:3162
+#: apply.c:3153
#, c-format
msgid "the patch applies to an empty '%s' but it is not empty"
-msgstr "补丁应用到空文件 '%s'，但是它并不空"
+msgstr "补丁应用到空文件 '%s'，但其并非空文件"
-#: apply.c:3180
+#: apply.c:3171
#, c-format
msgid "the necessary postimage %s for '%s' cannot be read"
msgstr "无法读取 '%2$s' 必须的目标文件 %1$s"
-#: apply.c:3193
+#: apply.c:3184
#, c-format
msgid "binary patch does not apply to '%s'"
msgstr "二进制补丁未应用到 '%s'"
-#: apply.c:3199
+#: apply.c:3190
#, c-format
msgid "binary patch to '%s' creates incorrect result (expecting %s, got %s)"
msgstr "到 '%s' 的二进制补丁产生了不正确的结果（应为 %s，却为 %s）"
-#: apply.c:3220
+#: apply.c:3211
#, c-format
msgid "patch failed: %s:%ld"
msgstr "打补丁失败：%s:%ld"
-#: apply.c:3342
+#: apply.c:3333
#, c-format
msgid "cannot checkout %s"
msgstr "不能检出 %s"
-#: apply.c:3390 apply.c:3401 apply.c:3447 setup.c:248
+#: apply.c:3381 apply.c:3392 apply.c:3438 setup.c:253
#, c-format
msgid "failed to read %s"
msgstr "无法读取 %s"
-#: apply.c:3398
+#: apply.c:3389
#, c-format
msgid "reading from '%s' beyond a symbolic link"
msgstr "读取位于符号链接中的 '%s'"
-#: apply.c:3427 apply.c:3667
+#: apply.c:3418 apply.c:3658
#, c-format
msgid "path %s has been renamed/deleted"
msgstr "路径 %s 已经被重命名/删除"
-#: apply.c:3510 apply.c:3681
+#: apply.c:3501 apply.c:3672
#, c-format
msgid "%s: does not exist in index"
msgstr "%s：不存在于索引中"
-#: apply.c:3519 apply.c:3689
+#: apply.c:3510 apply.c:3680
#, c-format
msgid "%s: does not match index"
msgstr "%s：和索引不匹配"
-#: apply.c:3554
+#: apply.c:3545
msgid "repository lacks the necessary blob to fall back on 3-way merge."
msgstr "仓库缺乏必要的数据对象以进行三方合并。"
-#: apply.c:3557
+#: apply.c:3548
#, c-format
msgid "Falling back to three-way merge...\n"
msgstr "回落到三方合并...\n"
-#: apply.c:3573 apply.c:3577
+#: apply.c:3564 apply.c:3568
#, c-format
msgid "cannot read the current contents of '%s'"
msgstr "无法读取 '%s' 的当前内容"
-#: apply.c:3589
+#: apply.c:3580
#, c-format
msgid "Failed to fall back on three-way merge...\n"
msgstr "无法回落到三方合并...\n"
-#: apply.c:3603
+#: apply.c:3594
#, c-format
msgid "Applied patch to '%s' with conflicts.\n"
msgstr "应用补丁到 '%s' 存在冲突。\n"
-#: apply.c:3608
+#: apply.c:3599
#, c-format
msgid "Applied patch to '%s' cleanly.\n"
msgstr "成功应用补丁到 '%s'。\n"
-#: apply.c:3634
+#: apply.c:3625
msgid "removal patch leaves file contents"
msgstr "移除补丁仍留下了文件内容"
-#: apply.c:3706
+#: apply.c:3697
#, c-format
msgid "%s: wrong type"
msgstr "%s：错误类型"
-#: apply.c:3708
+#: apply.c:3699
#, c-format
msgid "%s has type %o, expected %o"
msgstr "%s 的类型是 %o，应为 %o"
-#: apply.c:3859 apply.c:3861
+#: apply.c:3850 apply.c:3852
#, c-format
msgid "invalid path '%s'"
msgstr "无效路径 '%s'"
-#: apply.c:3917
+#: apply.c:3908
#, c-format
msgid "%s: already exists in index"
msgstr "%s：已经存在于索引中"
-#: apply.c:3920
+#: apply.c:3911
#, c-format
msgid "%s: already exists in working directory"
msgstr "%s：已经存在于工作区中"
-#: apply.c:3940
+#: apply.c:3931
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o)"
msgstr "%2$s 的新模式（%1$o）和旧模式（%3$o）不匹配"
-#: apply.c:3945
+#: apply.c:3936
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o) of %s"
msgstr "%2$s 的新模式（%1$o）和 %4$s 的旧模式（%3$o）不匹配"
-#: apply.c:3965
+#: apply.c:3956
#, c-format
msgid "affected file '%s' is beyond a symbolic link"
msgstr "受影响的文件 '%s' 位于符号链接中"
-#: apply.c:3969
+#: apply.c:3960
#, c-format
msgid "%s: patch does not apply"
msgstr "%s：补丁未应用"
-#: apply.c:3984
+#: apply.c:3975
#, c-format
msgid "Checking patch %s..."
msgstr "检查补丁 %s..."
-#: apply.c:4075
+#: apply.c:4066
#, c-format
msgid "sha1 information is lacking or useless for submodule %s"
msgstr "子模组 %s 的 sha1 信息缺失或无效"
-#: apply.c:4082
+#: apply.c:4073
#, c-format
msgid "mode change for %s, which is not in current HEAD"
-msgstr "%s 的属性改变，但它不再当前 HEAD 中"
+msgstr "%s 的模式被改变，但它不在当前 HEAD 中"
-#: apply.c:4085
+#: apply.c:4076
#, c-format
msgid "sha1 information is lacking or useless (%s)."
msgstr "sha1 信息缺失或无效（%s）。"
-#: apply.c:4090 builtin/checkout.c:233 builtin/reset.c:135
+#: apply.c:4081 builtin/checkout.c:252 builtin/reset.c:135
#, c-format
msgid "make_cache_entry failed for path '%s'"
msgstr "对路径 '%s' 的 make_cache_entry 操作失败"
-#: apply.c:4094
+#: apply.c:4085
#, c-format
msgid "could not add %s to temporary index"
msgstr "不能在临时索引中添加 %s"
-#: apply.c:4104
+#: apply.c:4095
#, c-format
msgid "could not write temporary index to %s"
msgstr "不能把临时索引写入到 %s"
-#: apply.c:4242
+#: apply.c:4233
#, c-format
msgid "unable to remove %s from index"
msgstr "不能从索引中移除 %s"
-#: apply.c:4277
+#: apply.c:4268
#, c-format
msgid "corrupt patch for submodule %s"
msgstr "子模组 %s 损坏的补丁"
-#: apply.c:4283
+#: apply.c:4274
#, c-format
msgid "unable to stat newly created file '%s'"
-msgstr "不能枚举新建文件 '%s' 的状态"
+msgstr "不能对新建文件 '%s' 调用 stat"
-#: apply.c:4291
+#: apply.c:4282
#, c-format
msgid "unable to create backing store for newly created file %s"
msgstr "不能为新建文件 %s 创建后端存储"
-#: apply.c:4297 apply.c:4441
+#: apply.c:4288 apply.c:4432
#, c-format
msgid "unable to add cache entry for %s"
msgstr "无法为 %s 添加缓存条目"
-#: apply.c:4338
+#: apply.c:4329
#, c-format
msgid "failed to write to '%s'"
msgstr "无法写入 '%s'"
-#: apply.c:4342
+#: apply.c:4333
#, c-format
msgid "closing file '%s'"
msgstr "关闭文件 '%s'"
-#: apply.c:4412
+#: apply.c:4403
#, c-format
msgid "unable to write file '%s' mode %o"
msgstr "不能写文件 '%s' 权限 %o"
-#: apply.c:4510
+#: apply.c:4501
#, c-format
msgid "Applied patch %s cleanly."
msgstr "成功应用补丁 %s。"
-#: apply.c:4518
+#: apply.c:4509
msgid "internal error"
msgstr "内部错误"
-#: apply.c:4521
+#: apply.c:4512
#, c-format
msgid "Applying patch %%s with %d reject..."
msgid_plural "Applying patch %%s with %d rejects..."
msgstr[0] "应用 %%s 个补丁，其中 %d 个被拒绝..."
msgstr[1] "应用 %%s 个补丁，其中 %d 个被拒绝..."
-#: apply.c:4532
+#: apply.c:4523
#, c-format
msgid "truncating .rej filename to %.*s.rej"
msgstr "截短 .rej 文件名为 %.*s.rej"
-#: apply.c:4540 builtin/fetch.c:740 builtin/fetch.c:989
+#: apply.c:4531 builtin/fetch.c:739 builtin/fetch.c:988
#, c-format
msgid "cannot open %s"
msgstr "不能打开 %s"
-#: apply.c:4554
+#: apply.c:4545
#, c-format
msgid "Hunk #%d applied cleanly."
msgstr "第 #%d 个片段成功应用。"
-#: apply.c:4558
+#: apply.c:4549
#, c-format
msgid "Rejected hunk #%d."
msgstr "拒绝第 #%d 个片段。"
-#: apply.c:4668
+#: apply.c:4659
#, c-format
msgid "Skipped patch '%s'."
msgstr "略过补丁 '%s'。"
-#: apply.c:4676
+#: apply.c:4667
msgid "unrecognized input"
msgstr "未能识别的输入"
-#: apply.c:4695
+#: apply.c:4686
msgid "unable to read index file"
msgstr "无法读取索引文件"
-#: apply.c:4833
+#: apply.c:4823
#, c-format
msgid "can't open patch '%s': %s"
msgstr "不能打开补丁 '%s'：%s"
-#: apply.c:4858
+#: apply.c:4850
#, c-format
msgid "squelched %d whitespace error"
msgid_plural "squelched %d whitespace errors"
msgstr[0] "抑制下仍有 %d 个空白字符误用"
msgstr[1] "抑制下仍有 %d 个空白字符误用"
-#: apply.c:4864 apply.c:4879
+#: apply.c:4856 apply.c:4871
#, c-format
msgid "%d line adds whitespace errors."
msgid_plural "%d lines add whitespace errors."
msgstr[0] "%d 行有空白字符误用。"
msgstr[1] "%d 行有空白字符误用。"
-#: apply.c:4872
+#: apply.c:4864
#, c-format
msgid "%d line applied after fixing whitespace errors."
msgid_plural "%d lines applied after fixing whitespace errors."
msgstr[0] "修复空白错误后，应用了 %d 行。"
msgstr[1] "修复空白错误后，应用了 %d 行。"
-#: apply.c:4888 builtin/add.c:463 builtin/mv.c:286 builtin/rm.c:431
+#: apply.c:4880 builtin/add.c:463 builtin/mv.c:298 builtin/rm.c:391
msgid "Unable to write new index file"
msgstr "无法写入新索引文件"
-#: apply.c:4919 apply.c:4922 builtin/am.c:2277 builtin/am.c:2280
-#: builtin/clone.c:95 builtin/fetch.c:98 builtin/pull.c:180
-#: builtin/submodule--helper.c:281 builtin/submodule--helper.c:407
-#: builtin/submodule--helper.c:589 builtin/submodule--helper.c:592
-#: builtin/submodule--helper.c:944 builtin/submodule--helper.c:947
+#: apply.c:4911 apply.c:4914 builtin/am.c:2276 builtin/am.c:2279
+#: builtin/clone.c:113 builtin/fetch.c:98 builtin/pull.c:180
+#: builtin/submodule--helper.c:304 builtin/submodule--helper.c:629
+#: builtin/submodule--helper.c:632 builtin/submodule--helper.c:973
+#: builtin/submodule--helper.c:976 builtin/submodule--helper.c:1161
+#: git-add--interactive.perl:239
msgid "path"
msgstr "路径"
-#: apply.c:4920
+#: apply.c:4912
msgid "don't apply changes matching the given path"
msgstr "不要应用与给出路径向匹配的变更"
-#: apply.c:4923
+#: apply.c:4915
msgid "apply changes matching the given path"
msgstr "应用与给出路径向匹配的变更"
-#: apply.c:4925 builtin/am.c:2286
+#: apply.c:4917 builtin/am.c:2285
msgid "num"
msgstr "数字"
-#: apply.c:4926
+#: apply.c:4918
msgid "remove <num> leading slashes from traditional diff paths"
msgstr "从传统的 diff 路径中移除指定数量的前导斜线"
-#: apply.c:4929
+#: apply.c:4921
msgid "ignore additions made by the patch"
msgstr "忽略补丁中的添加的文件"
-#: apply.c:4931
+#: apply.c:4923
msgid "instead of applying the patch, output diffstat for the input"
msgstr "不应用补丁，而是显示输入的差异统计（diffstat）"
-#: apply.c:4935
+#: apply.c:4927
msgid "show number of added and deleted lines in decimal notation"
msgstr "以十进制数显示添加和删除的行数"
-#: apply.c:4937
+#: apply.c:4929
msgid "instead of applying the patch, output a summary for the input"
msgstr "不应用补丁，而是显示输入的概要"
-#: apply.c:4939
+#: apply.c:4931
msgid "instead of applying the patch, see if the patch is applicable"
msgstr "不应用补丁，而是查看补丁是否可应用"
-#: apply.c:4941
+#: apply.c:4933
msgid "make sure the patch is applicable to the current index"
msgstr "确认补丁可以应用到当前索引"
-#: apply.c:4943
+#: apply.c:4935
msgid "apply a patch without touching the working tree"
msgstr "应用补丁而不修改工作区"
-#: apply.c:4945
+#: apply.c:4937
msgid "accept a patch that touches outside the working area"
msgstr "接受修改工作区之外文件的补丁"
-#: apply.c:4947
+#: apply.c:4939
msgid "also apply the patch (use with --stat/--summary/--check)"
msgstr "还应用此补丁（与 --stat/--summary/--check 选项同时使用）"
-#: apply.c:4949
+#: apply.c:4941
msgid "attempt three-way merge if a patch does not apply"
msgstr "如果一个补丁不能应用则尝试三方合并"
-#: apply.c:4951
+#: apply.c:4943
msgid "build a temporary index based on embedded index information"
msgstr "创建一个临时索引基于嵌入的索引信息"
-#: apply.c:4954 builtin/checkout-index.c:169 builtin/ls-files.c:505
+#: apply.c:4946 builtin/checkout-index.c:169 builtin/ls-files.c:515
msgid "paths are separated with NUL character"
msgstr "路径以 NUL 字符分隔"
-#: apply.c:4956
+#: apply.c:4948
msgid "ensure at least <n> lines of context match"
msgstr "确保至少匹配 <n> 行上下文"
-#: apply.c:4957 builtin/am.c:2265
+#: apply.c:4949 builtin/am.c:2264
msgid "action"
msgstr "动作"
-#: apply.c:4958
+#: apply.c:4950
msgid "detect new or modified lines that have whitespace errors"
msgstr "检查新增和修改的行中间的空白字符滥用"
-#: apply.c:4961 apply.c:4964
+#: apply.c:4953 apply.c:4956
msgid "ignore changes in whitespace when finding context"
msgstr "查找上下文时忽略空白字符的变更"
-#: apply.c:4967
+#: apply.c:4959
msgid "apply the patch in reverse"
msgstr "反向应用补丁"
-#: apply.c:4969
+#: apply.c:4961
msgid "don't expect at least one line of context"
msgstr "无需至少一行上下文"
-#: apply.c:4971
+#: apply.c:4963
msgid "leave the rejected hunks in corresponding *.rej files"
msgstr "将拒绝的补丁片段保存在对应的 *.rej 文件中"
-#: apply.c:4973
+#: apply.c:4965
msgid "allow overlapping hunks"
msgstr "允许重叠的补丁片段"
-#: apply.c:4974 builtin/add.c:267 builtin/check-ignore.c:19
-#: builtin/commit.c:1339 builtin/count-objects.c:94 builtin/fsck.c:593
-#: builtin/log.c:1860 builtin/mv.c:110 builtin/read-tree.c:114
+#: apply.c:4966 builtin/add.c:267 builtin/check-ignore.c:19
+#: builtin/commit.c:1337 builtin/count-objects.c:94 builtin/fsck.c:651
+#: builtin/log.c:1867 builtin/mv.c:122 builtin/read-tree.c:134
msgid "be verbose"
msgstr "冗长输出"
-#: apply.c:4976
+#: apply.c:4968
msgid "tolerate incorrectly detected missing new-line at the end of file"
msgstr "允许不正确的文件末尾换行符"
-#: apply.c:4979
+#: apply.c:4971
msgid "do not trust the line counts in the hunk headers"
msgstr "不信任补丁片段的头信息中的行号"
-#: apply.c:4981 builtin/am.c:2274
+#: apply.c:4973 builtin/am.c:2273
msgid "root"
msgstr "根目录"
-#: apply.c:4982
+#: apply.c:4974
msgid "prepend <root> to all filenames"
msgstr "为所有文件名前添加 <根目录>"
msgid "git archive --remote <repo> [--exec <cmd>] --list"
msgstr "git archive --remote <仓库> [--exec <命令>] --list"
-#: archive.c:344 builtin/add.c:152 builtin/add.c:442 builtin/rm.c:327
+#: archive.c:332 builtin/add.c:152 builtin/add.c:442 builtin/rm.c:300
#, c-format
msgid "pathspec '%s' did not match any files"
msgstr "路径规格 '%s' 未匹配任何文件"
-#: archive.c:429
+#: archive.c:417
msgid "fmt"
msgstr "格式"
-#: archive.c:429
+#: archive.c:417
msgid "archive format"
msgstr "归档格式"
-#: archive.c:430 builtin/log.c:1429
+#: archive.c:418 builtin/log.c:1436
msgid "prefix"
msgstr "前缀"
-#: archive.c:431
+#: archive.c:419
msgid "prepend prefix to each pathname in the archive"
msgstr "为归档中每个路径名加上前缀"
-#: archive.c:432 builtin/archive.c:88 builtin/blame.c:2603
-#: builtin/blame.c:2604 builtin/config.c:59 builtin/fast-export.c:987
-#: builtin/fast-export.c:989 builtin/grep.c:723 builtin/hash-object.c:101
-#: builtin/ls-files.c:539 builtin/ls-files.c:542 builtin/notes.c:401
-#: builtin/notes.c:564 builtin/read-tree.c:109 parse-options.h:153
+#: archive.c:420 builtin/blame.c:2598 builtin/blame.c:2599 builtin/config.c:60
+#: builtin/fast-export.c:987 builtin/fast-export.c:989 builtin/grep.c:1061
+#: builtin/hash-object.c:101 builtin/ls-files.c:549 builtin/ls-files.c:552
+#: builtin/notes.c:401 builtin/notes.c:564 builtin/read-tree.c:129
+#: parse-options.h:153
msgid "file"
msgstr "文件"
-#: archive.c:433 builtin/archive.c:89
+#: archive.c:421 builtin/archive.c:89
msgid "write the archive to this file"
msgstr "归档写入此文件"
-#: archive.c:435
+#: archive.c:423
msgid "read .gitattributes in working directory"
msgstr "读取工作区中的 .gitattributes"
-#: archive.c:436
+#: archive.c:424
msgid "report archived files on stderr"
msgstr "在标准错误上报告归档文件"
-#: archive.c:437
+#: archive.c:425
msgid "store only"
msgstr "只存储"
-#: archive.c:438
+#: archive.c:426
msgid "compress faster"
msgstr "压缩速度更快"
-#: archive.c:446
+#: archive.c:434
msgid "compress better"
msgstr "压缩效果更好"
-#: archive.c:449
+#: archive.c:437
msgid "list supported archive formats"
msgstr "列出支持的归档格式"
-#: archive.c:451 builtin/archive.c:90 builtin/clone.c:85 builtin/clone.c:88
-#: builtin/submodule--helper.c:601 builtin/submodule--helper.c:953
+#: archive.c:439 builtin/archive.c:90 builtin/clone.c:103 builtin/clone.c:106
+#: builtin/submodule--helper.c:641 builtin/submodule--helper.c:982
msgid "repo"
msgstr "仓库"
-#: archive.c:452 builtin/archive.c:91
+#: archive.c:440 builtin/archive.c:91
msgid "retrieve the archive from remote repository <repo>"
msgstr "从远程仓库（<仓库>）提取归档文件"
-#: archive.c:453 builtin/archive.c:92 builtin/notes.c:485
+#: archive.c:441 builtin/archive.c:92 builtin/notes.c:485
msgid "command"
msgstr "命令"
-#: archive.c:454 builtin/archive.c:93
+#: archive.c:442 builtin/archive.c:93
msgid "path to the remote git-upload-archive command"
msgstr "远程 git-upload-archive 命令的路径"
-#: archive.c:461
+#: archive.c:449
msgid "Unexpected option --remote"
msgstr "未知参数 --remote"
-#: archive.c:463
+#: archive.c:451
msgid "Option --exec can only be used together with --remote"
msgstr "选项 --exec 只能和 --remote 同时使用"
-#: archive.c:465
+#: archive.c:453
msgid "Unexpected option --output"
msgstr "未知参数 --output"
-#: archive.c:487
+#: archive.c:475
#, c-format
msgid "Unknown archive format '%s'"
msgstr "未知归档格式 '%s'"
-#: archive.c:494
+#: archive.c:482
#, c-format
msgid "Argument not supported for format '%s': -%d"
msgstr "参数不支持此格式 '%s'：-%d"
-#: attr.c:263
+#: attr.c:212
+#, c-format
+msgid "%.*s is not a valid attribute name"
+msgstr "%.*s 不是一个有效的属性名"
+
+#: attr.c:408
msgid ""
"Negative patterns are ignored in git attributes\n"
"Use '\\!' for literal leading exclamation."
"负值模版在 git attributes 中被忽略\n"
"当字符串确实要以感叹号开始时，使用 '\\!'。"
-#: bisect.c:441
+#: bisect.c:444
#, c-format
msgid "Could not open file '%s'"
msgstr "不能打开文件 '%s'"
-#: bisect.c:446
+#: bisect.c:449
#, c-format
msgid "Badly quoted content in file '%s': %s"
msgstr "文件 '%s' 包含错误的引用格式：%s"
-#: bisect.c:655
+#: bisect.c:657
#, c-format
msgid "We cannot bisect more!\n"
msgstr "我们无法进行更多的二分查找！\n"
-#: bisect.c:708
+#: bisect.c:710
#, c-format
msgid "Not a valid commit name %s"
msgstr "不是一个有效的提交名 %s"
-#: bisect.c:732
+#: bisect.c:734
#, c-format
msgid ""
"The merge base %s is bad.\n"
"合并基线 %s 是坏的。\n"
"这意味着介于 %s 和 [%s] 之间的 bug 已经被修复。\n"
-#: bisect.c:737
+#: bisect.c:739
#, c-format
msgid ""
"The merge base %s is new.\n"
"合并基线 %s 是新的。\n"
"介于 %s 和 [%s] 之间的属性已经被修改。\n"
-#: bisect.c:742
+#: bisect.c:744
#, c-format
msgid ""
"The merge base %s is %s.\n"
"合并基线 %s 是 %s。\n"
"这意味着第一个 '%s' 提交位于 %s 和 [%s] 之间。\n"
-#: bisect.c:750
+#: bisect.c:752
#, c-format
msgid ""
-"Some %s revs are not ancestor of the %s rev.\n"
+"Some %s revs are not ancestors of the %s rev.\n"
"git bisect cannot work properly in this case.\n"
"Maybe you mistook %s and %s revs?\n"
msgstr ""
"这种情况下 git 二分查找无法正常工作。\n"
"您可能弄错了 %s 和 %s 版本？\n"
-#: bisect.c:763
+#: bisect.c:765
#, c-format
msgid ""
"the merge base between %s and [%s] must be skipped.\n"
"所以我们无法确认第一个 %s 提交是否介于 %s 和 %s 之间。\n"
"我们仍旧继续。"
-#: bisect.c:798
+#: bisect.c:800
#, c-format
msgid "Bisecting: a merge base must be tested\n"
msgstr "二分查找中：合并基线必须是经过测试的\n"
-#: bisect.c:849
+#: bisect.c:851
#, c-format
msgid "a %s revision is needed"
msgstr "需要一个 %s 版本"
-#: bisect.c:866 builtin/notes.c:174 builtin/tag.c:248
+#: bisect.c:868 builtin/notes.c:174 builtin/tag.c:255
#, c-format
msgid "could not create file '%s'"
msgstr "不能创建文件 '%s'"
-#: bisect.c:917
+#: bisect.c:919
#, c-format
msgid "could not read file '%s'"
msgstr "不能读取文件 '%s'"
-#: bisect.c:947
+#: bisect.c:949
msgid "reading bisect refs failed"
msgstr "读取二分查找引用失败"
-#: bisect.c:967
+#: bisect.c:969
#, c-format
msgid "%s was both %s and %s\n"
msgstr "%s 同时为 %s 和 %s\n"
-#: bisect.c:975
+#: bisect.c:977
#, c-format
msgid ""
"No testable commit found.\n"
"没有发现可测试的提交。\n"
"可能您在运行时使用了错误的路径参数？\n"
-#: bisect.c:994
+#: bisect.c:996
#, c-format
msgid "(roughly %d step)"
msgid_plural "(roughly %d steps)"
#. TRANSLATORS: the last %s will be replaced with
#. "(roughly %d steps)" translation
-#: bisect.c:998
+#: bisect.c:1000
#, c-format
msgid "Bisecting: %d revision left to test after this %s\n"
msgid_plural "Bisecting: %d revisions left to test after this %s\n"
msgid "'%s' is already checked out at '%s'"
msgstr "'%s' 已经检出到 '%s'"
-#: branch.c:363
+#: branch.c:364
#, c-format
msgid "HEAD of working tree %s is not updated"
msgstr "工作区 %s 的 HEAD 指向没有被更新"
msgid "unrecognized header: %s%s (%d)"
msgstr "未能识别的包头：%s%s (%d)"
-#: bundle.c:87 sequencer.c:963 builtin/commit.c:777
+#: bundle.c:87 sequencer.c:1341 sequencer.c:1767 builtin/commit.c:777
#, c-format
msgid "could not open '%s'"
msgstr "不能打开 '%s'"
msgid "Repository lacks these prerequisite commits:"
msgstr "仓库中缺少这些必备的提交："
-#: bundle.c:163 ref-filter.c:1462 sequencer.c:830 sequencer.c:1374
-#: builtin/blame.c:2814 builtin/commit.c:1061 builtin/log.c:348
-#: builtin/log.c:890 builtin/log.c:1340 builtin/log.c:1666 builtin/log.c:1909
-#: builtin/merge.c:356 builtin/shortlog.c:170
+#: bundle.c:163 ref-filter.c:1852 sequencer.c:1162 sequencer.c:2321
+#: builtin/blame.c:2811 builtin/commit.c:1061 builtin/log.c:353
+#: builtin/log.c:897 builtin/log.c:1347 builtin/log.c:1673 builtin/log.c:1916
+#: builtin/merge.c:359 builtin/shortlog.c:176
msgid "revision walk setup failed"
msgstr "版本遍历设置失败"
msgid "ref '%s' is excluded by the rev-list options"
msgstr "引用 '%s' 被 rev-list 选项排除"
-#: bundle.c:443 builtin/log.c:165 builtin/log.c:1572 builtin/shortlog.c:273
+#: bundle.c:443 builtin/log.c:170 builtin/log.c:1579 builtin/shortlog.c:281
#, c-format
msgid "unrecognized argument: %s"
msgstr "未能识别的参数：%s"
msgid "index-pack died"
msgstr "index-pack 终止"
-#: color.c:290
+#: color.c:300
#, c-format
msgid "invalid color value: %.*s"
msgstr "无效的颜色值：%.*s"
-#: commit.c:40 builtin/am.c:421 builtin/am.c:457 builtin/am.c:1493
-#: builtin/am.c:2127
+#: commit.c:40 sequencer.c:1579 builtin/am.c:419 builtin/am.c:455
+#: builtin/am.c:1489 builtin/am.c:2126
#, c-format
msgid "could not parse %s"
msgstr "不能解析 %s"
msgid "%s %s is not a commit!"
msgstr "%s %s 不是一个提交!"
-#: commit.c:1514
+#: commit.c:1511
msgid ""
"Warning: commit message did not conform to UTF-8.\n"
"You may want to amend it after fixing the message, or set the config\n"
"variable i18n.commitencoding to the encoding your project uses.\n"
msgstr ""
-"警告：提交说明不符合 UTF-8 字符集。\n"
+"警告：提交说明不符合 UTF-8 字符编码。\n"
"您可以通过修补提交来改正提交说明，或者将配置变量 i18n.commitencoding\n"
-"设置为您项目所用的字符集。\n"
+"设置为您项目所用的字符编码。\n"
#: compat/obstack.c:406 compat/obstack.c:408
msgid "memory exhausted"
msgstr "内存耗尽"
-#: config.c:516
+#: config.c:191
+msgid "relative config include conditionals must come from files"
+msgstr "包含相对路径的条件引用必须来自于文件"
+
+#: config.c:711
#, c-format
msgid "bad config line %d in blob %s"
msgstr "数据对象 %2$s 中错误的配置行 %1$d"
-#: config.c:520
+#: config.c:715
#, c-format
msgid "bad config line %d in file %s"
msgstr "文件 %2$s 中错误的配置行 %1$d"
-#: config.c:524
+#: config.c:719
#, c-format
msgid "bad config line %d in standard input"
msgstr "标准输入中错误的配置行 %d"
-#: config.c:528
+#: config.c:723
#, c-format
msgid "bad config line %d in submodule-blob %s"
msgstr "子模组数据对象 %2$s 中错误的配置行 %1$d"
-#: config.c:532
+#: config.c:727
#, c-format
msgid "bad config line %d in command line %s"
msgstr "命令行 %2$s 中错误的配置行 %1$d"
-#: config.c:536
+#: config.c:731
#, c-format
msgid "bad config line %d in %s"
msgstr "在 %2$s 中错误的配置行 %1$d"
-#: config.c:655
+#: config.c:859
msgid "out of range"
msgstr "超出范围"
-#: config.c:655
+#: config.c:859
msgid "invalid unit"
msgstr "无效的单位"
-#: config.c:661
+#: config.c:865
#, c-format
msgid "bad numeric config value '%s' for '%s': %s"
msgstr "配置变量 '%2$s' 的数字取值 '%1$s' 设置错误：%3$s"
-#: config.c:666
+#: config.c:870
#, c-format
msgid "bad numeric config value '%s' for '%s' in blob %s: %s"
msgstr "数据对象 %3$s 中配置变量 '%2$s' 错误的取值 '%1$s'：%4$s"
-#: config.c:669
+#: config.c:873
#, c-format
msgid "bad numeric config value '%s' for '%s' in file %s: %s"
msgstr "文件 %3$s 中配置变量 '%2$s' 错误的取值 '%1$s'：%4$s"
-#: config.c:672
+#: config.c:876
#, c-format
msgid "bad numeric config value '%s' for '%s' in standard input: %s"
msgstr "标准输入中配置变量 '%2$s' 错误的取值 '%1$s'：%3$s"
-#: config.c:675
+#: config.c:879
#, c-format
msgid "bad numeric config value '%s' for '%s' in submodule-blob %s: %s"
msgstr "子模组数据 %3$s 中配置变量 '%2$s' 错误的取值 '%1$s'：%4$s"
-#: config.c:678
+#: config.c:882
#, c-format
msgid "bad numeric config value '%s' for '%s' in command line %s: %s"
msgstr "命令行 %3$s 中配置变量 '%2$s' 错误的取值 '%1$s'：%4$s"
-#: config.c:681
+#: config.c:885
#, c-format
msgid "bad numeric config value '%s' for '%s' in %s: %s"
msgstr "在 %3$s 中配置变量 '%2$s' 错误的取值 '%1$s'：%4$s"
-#: config.c:768
+#: config.c:980
#, c-format
msgid "failed to expand user dir in: '%s'"
msgstr "无法扩展 '%s' 中的用户目录"
-#: config.c:852 config.c:863
+#: config.c:1075 config.c:1086
#, c-format
msgid "bad zlib compression level %d"
msgstr "错误的 zlib 压缩级别 %d"
-#: config.c:978
+#: config.c:1203
#, c-format
msgid "invalid mode for object creation: %s"
msgstr "无效的对象创建模式：%s"
-#: config.c:1312
+#: config.c:1359
+#, c-format
+msgid "bad pack compression level %d"
+msgstr "错误的打包压缩级别 %d"
+
+#: config.c:1557
msgid "unable to parse command-line config"
msgstr "无法解析命令行中的配置"
-#: config.c:1362
+#: config.c:1611
msgid "unknown error occurred while reading the configuration files"
msgstr "在读取配置文件时遇到未知错误"
-#: config.c:1716
+#: config.c:1970
+#, c-format
+msgid "Invalid %s: '%s'"
+msgstr "无效 %s：'%s'"
+
+#: config.c:1991
+#, c-format
+msgid "unknown core.untrackedCache value '%s'; using 'keep' default value"
+msgstr "未知的 core.untrackedCache 取值 '%s'，使用默认值 'keep'"
+
+#: config.c:2017
+#, c-format
+msgid "splitIndex.maxPercentChange value '%d' should be between 0 and 100"
+msgstr "splitIndex.maxPercentChange 的取值 '%d' 应该介于 0 和 100 之间"
+
+#: config.c:2028
#, c-format
msgid "unable to parse '%s' from command-line config"
msgstr "无法解析命令行配置中的 '%s'"
-#: config.c:1718
+#: config.c:2030
#, c-format
msgid "bad config variable '%s' in file '%s' at line %d"
msgstr "在文件 '%2$s' 的第 %3$d 行发现错误的配置变量 '%1$s'"
-#: config.c:1777
+#: config.c:2089
#, c-format
msgid "%s has multiple values"
msgstr "%s 有多个取值"
-#: config.c:2311
+#: config.c:2423 config.c:2648
+#, c-format
+msgid "fstat on %s failed"
+msgstr "对 %s 调用 fstat 失败"
+
+#: config.c:2541
#, c-format
msgid "could not set '%s' to '%s'"
msgstr "不能设置 '%s' 为 '%s'"
-#: config.c:2313
+#: config.c:2543 builtin/remote.c:774
#, c-format
msgid "could not unset '%s'"
msgstr "不能取消设置 '%s'"
#: connect.c:49
msgid "The remote end hung up upon initial contact"
-msgstr "远端在初始连接时即挂断"
+msgstr "远端在连接发起时即挂断"
#: connect.c:51
msgid ""
"\n"
"请确认您有正确的访问权限并且仓库存在。"
-#: connected.c:63 builtin/fsck.c:173 builtin/prune.c:140
+#: connected.c:63 builtin/fsck.c:190 builtin/prune.c:140
msgid "Checking connectivity"
msgstr "检查连接中"
#: diffcore-rename.c:536
msgid "Performing inexact rename detection"
-msgstr "æ£å\9c¨è¿\9bè¡\8cé\9d\9e精确ç\9a\84é\87\8då\91½å\90\8dæ£\80测"
+msgstr "æ£å\9c¨è¿\9bè¡\8cé\9d\9e精确ç\9a\84é\87\8då\91½å\90\8dæ\8e¢测"
#: diff.c:62
#, c-format
msgid " Unknown dirstat parameter '%s'\n"
msgstr " 未知的 dirstat 参数 '%s'\n"
-#: diff.c:283
+#: diff.c:281
#, c-format
msgid "Unknown value for 'diff.submodule' config variable: '%s'"
msgstr "配置变量 'diff.submodule' 未知的取值：'%s'"
-#: diff.c:346
+#: diff.c:344
#, c-format
msgid ""
"Found errors in 'diff.dirstat' config variable:\n"
"发现配置变量 'diff.dirstat' 中的错误：\n"
"%s"
-#: diff.c:3087
+#: diff.c:3102
#, c-format
msgid "external diff died, stopping at %s"
msgstr "外部 diff 退出，停止在 %s"
-#: diff.c:3412
+#: diff.c:3428
msgid "--name-only, --name-status, --check and -s are mutually exclusive"
msgstr "--name-only、--name-status、--check 和 -s 是互斥的"
-#: diff.c:3502
+#: diff.c:3518
msgid "--follow requires exactly one pathspec"
msgstr "--follow 明确要求只跟一个路径规格"
-#: diff.c:3665
+#: diff.c:3681
#, c-format
msgid ""
"Failed to parse --dirstat/-X option parameter:\n"
"无法解析 --dirstat/-X 选项的参数：\n"
"%s"
-#: diff.c:3679
+#: diff.c:3695
#, c-format
msgid "Failed to parse --submodule option parameter: '%s'"
msgstr "无法解析 --submodule 选项的参数：'%s'"
-#: diff.c:4700
+#: diff.c:4719
msgid "inexact rename detection was skipped due to too many files."
msgstr "因为文件太多，略过不严格的重命名检查。"
-#: diff.c:4703
+#: diff.c:4722
msgid "only found copies from modified paths due to too many files."
msgstr "因为文件太多，只在修改的路径中查找拷贝。"
-#: diff.c:4706
+#: diff.c:4725
#, c-format
msgid ""
"you may want to set your %s variable to at least %d and retry the command."
-msgstr "您可能想要将您的 %s 变量至少设置为 %d 并重复此命令。"
+msgstr "您可能想要将变量 %s 设置为至少 %d 并再次执行此命令。"
-#: dir.c:1866
+#: dir.c:1899
msgid "failed to get kernel name and information"
msgstr "无法获得内核名称和信息"
-#: dir.c:1985
+#: dir.c:2018
msgid "Untracked cache is disabled on this system or location."
msgstr "缓存未跟踪文件在本系统或位置中被禁用。"
-#: fetch-pack.c:213
+#: dir.c:2776 dir.c:2781
+#, c-format
+msgid "could not create directories for %s"
+msgstr "不能为 %s 创建目录"
+
+#: dir.c:2806
+#, c-format
+msgid "could not migrate git directory from '%s' to '%s'"
+msgstr "不能从 '%s' 迁移 git 目录到 '%s'"
+
+#: entry.c:280
+#, c-format
+msgid "could not stat file '%s'"
+msgstr "不能对文件 '%s' 调用 stat"
+
+#: fetch-pack.c:249
msgid "git fetch-pack: expected shallow list"
msgstr "git fetch-pack：应为 shallow 列表"
-#: fetch-pack.c:225
+#: fetch-pack.c:261
msgid "git fetch-pack: expected ACK/NAK, got EOF"
msgstr "git fetch-pack：应为 ACK/NAK，却得到 EOF"
-#: fetch-pack.c:243
+#: fetch-pack.c:280 builtin/archive.c:63
+#, c-format
+msgid "remote error: %s"
+msgstr "远程错误：%s"
+
+#: fetch-pack.c:281
#, c-format
msgid "git fetch-pack: expected ACK/NAK, got '%s'"
msgstr "git fetch-pack：应为 ACK/NAK，却得到 '%s'"
-#: fetch-pack.c:295
+#: fetch-pack.c:333
msgid "--stateless-rpc requires multi_ack_detailed"
msgstr "--stateless-rpc 需要 multi_ack_detailed"
-#: fetch-pack.c:381
+#: fetch-pack.c:419
#, c-format
msgid "invalid shallow line: %s"
msgstr "无效的 shallow 信息：%s"
-#: fetch-pack.c:387
+#: fetch-pack.c:425
#, c-format
msgid "invalid unshallow line: %s"
msgstr "无效的 unshallow 信息：%s"
-#: fetch-pack.c:389
+#: fetch-pack.c:427
#, c-format
msgid "object not found: %s"
msgstr "对象未找到：%s"
-#: fetch-pack.c:392
+#: fetch-pack.c:430
#, c-format
msgid "error in object: %s"
msgstr "对象中出错：%s"
-#: fetch-pack.c:394
+#: fetch-pack.c:432
#, c-format
msgid "no shallow found: %s"
msgstr "未发现 shallow：%s"
-#: fetch-pack.c:397
+#: fetch-pack.c:435
#, c-format
msgid "expected shallow/unshallow, got %s"
msgstr "应为 shallow/unshallow，却得到 %s"
-#: fetch-pack.c:436
+#: fetch-pack.c:474
#, c-format
msgid "got %s %d %s"
msgstr "得到 %s %d %s"
-#: fetch-pack.c:450
+#: fetch-pack.c:488
#, c-format
msgid "invalid commit %s"
msgstr "无效提交 %s"
-#: fetch-pack.c:483
+#: fetch-pack.c:521
msgid "giving up"
msgstr "放弃"
-#: fetch-pack.c:493 progress.c:235
+#: fetch-pack.c:531 progress.c:235
msgid "done"
msgstr "完成"
-#: fetch-pack.c:505
+#: fetch-pack.c:543
#, c-format
msgid "got %s (%d) %s"
msgstr "得到 %s (%d) %s"
-#: fetch-pack.c:551
+#: fetch-pack.c:589
#, c-format
msgid "Marking %s as complete"
msgstr "标记 %s 为完成"
-#: fetch-pack.c:697
+#: fetch-pack.c:737
#, c-format
msgid "already have %s (%s)"
-msgstr "已经有 %s (%s)"
+msgstr "已经有 %s（%s）"
-#: fetch-pack.c:735
+#: fetch-pack.c:775
msgid "fetch-pack: unable to fork off sideband demultiplexer"
msgstr "fetch-pack：无法派生 sideband 多路输出"
-#: fetch-pack.c:743
+#: fetch-pack.c:783
msgid "protocol error: bad pack header"
msgstr "协议错误：坏的包头"
-#: fetch-pack.c:799
+#: fetch-pack.c:839
#, c-format
msgid "fetch-pack: unable to fork off %s"
msgstr "fetch-pack：无法派生进程 %s"
-#: fetch-pack.c:815
+#: fetch-pack.c:855
#, c-format
msgid "%s failed"
msgstr "%s 失败"
-#: fetch-pack.c:817
+#: fetch-pack.c:857
msgid "error in sideband demultiplexer"
msgstr "sideband 多路输出出错"
-#: fetch-pack.c:844
+#: fetch-pack.c:884
msgid "Server does not support shallow clients"
msgstr "服务器不支持 shalllow 客户端"
-#: fetch-pack.c:848
+#: fetch-pack.c:888
msgid "Server supports multi_ack_detailed"
msgstr "服务器支持 multi_ack_detailed"
-#: fetch-pack.c:851
+#: fetch-pack.c:891
msgid "Server supports no-done"
msgstr "服务器支持 no-done"
-#: fetch-pack.c:857
+#: fetch-pack.c:897
msgid "Server supports multi_ack"
msgstr "服务器支持 multi_ack"
-#: fetch-pack.c:861
+#: fetch-pack.c:901
msgid "Server supports side-band-64k"
msgstr "服务器支持 side-band-64k"
-#: fetch-pack.c:865
+#: fetch-pack.c:905
msgid "Server supports side-band"
msgstr "服务器支持 side-band"
-#: fetch-pack.c:869
+#: fetch-pack.c:909
msgid "Server supports allow-tip-sha1-in-want"
msgstr "服务器支持 allow-tip-sha1-in-want"
-#: fetch-pack.c:873
+#: fetch-pack.c:913
msgid "Server supports allow-reachable-sha1-in-want"
msgstr "服务器支持 allow-reachable-sha1-in-want"
-#: fetch-pack.c:883
+#: fetch-pack.c:923
msgid "Server supports ofs-delta"
msgstr "服务器支持 ofs-delta"
-#: fetch-pack.c:890
+#: fetch-pack.c:930
#, c-format
msgid "Server version is %.*s"
msgstr "服务器版本 %.*s"
-#: fetch-pack.c:896
+#: fetch-pack.c:936
msgid "Server does not support --shallow-since"
msgstr "服务器不支持 --shallow-since"
-#: fetch-pack.c:900
+#: fetch-pack.c:940
msgid "Server does not support --shallow-exclude"
msgstr "服务器不支持 --shallow-exclude"
-#: fetch-pack.c:902
+#: fetch-pack.c:942
msgid "Server does not support --deepen"
msgstr "服务器不支持 --deepen"
-#: fetch-pack.c:913
+#: fetch-pack.c:953
msgid "no common commits"
msgstr "没有共同的提交"
-#: fetch-pack.c:925
+#: fetch-pack.c:965
msgid "git fetch-pack: fetch failed."
msgstr "git fetch-pack：获取失败。"
-#: fetch-pack.c:1087
+#: fetch-pack.c:1127
msgid "no matching remote head"
msgstr "没有匹配的远程分支"
+#: fetch-pack.c:1149
+#, c-format
+msgid "no such remote ref %s"
+msgstr "没有这样的远程引用 %s"
+
+#: fetch-pack.c:1152
+#, c-format
+msgid "Server does not allow request for unadvertised object %s"
+msgstr "服务器不允许请求未公开的对象 %s"
+
#: gpg-interface.c:185
msgid "gpg failed to sign the data"
msgstr "gpg 无法为数据签名"
msgid "failed writing detached signature to '%s'"
msgstr "无法将分离式签名写入 '%s'"
-#: grep.c:1782
+#: graph.c:96
+#, c-format
+msgid "ignore invalid color '%.*s' in log.graphColors"
+msgstr "忽略 log.graphColors 中无效的颜色 '%.*s'"
+
+#: grep.c:1796
#, c-format
msgid "'%s': unable to read %s"
msgstr "'%s'：无法读取 %s"
-#: grep.c:1799 builtin/clone.c:381 builtin/diff.c:84 builtin/rm.c:155
+#: grep.c:1813 builtin/clone.c:399 builtin/diff.c:81 builtin/rm.c:133
#, c-format
msgid "failed to stat '%s'"
-msgstr "无法枚举 '%s' 状态"
+msgstr "对 '%s' 调用 stat 失败"
-#: grep.c:1810
+#: grep.c:1824
#, c-format
msgid "'%s': short read"
msgstr "'%s'：读取不完整"
-#: help.c:203
+#: help.c:218
#, c-format
msgid "available git commands in '%s'"
msgstr "在 '%s' 下可用的 git 命令"
-#: help.c:210
+#: help.c:225
msgid "git commands available from elsewhere on your $PATH"
msgstr "在 $PATH 路径中的其他地方可用的 git 命令"
-#: help.c:241
+#: help.c:256
msgid "These are common Git commands used in various situations:"
msgstr "这些是各种场合常见的 Git 命令："
-#: help.c:306
+#: help.c:321
#, c-format
msgid ""
"'%s' appears to be a git command, but we were not\n"
"'%s' 像是一个 git 命令，但却无法运行。\n"
"可能是 git-%s 受损？"
-#: help.c:361
+#: help.c:376
msgid "Uh oh. Your system reports no Git commands at all."
msgstr "唉呀，您的系统中未发现 Git 命令。"
-#: help.c:383
+#: help.c:398
#, c-format
msgid ""
"WARNING: You called a Git command named '%s', which does not exist.\n"
"警告：您运行一个不存在的 Git 命令 '%s'。继续执行假定您要运行的\n"
"是 '%s'"
-#: help.c:388
+#: help.c:403
#, c-format
msgid "in %0.1f seconds automatically..."
msgstr "在 %0.1f 秒钟后自动运行..."
-#: help.c:395
+#: help.c:410
#, c-format
msgid "git: '%s' is not a git command. See 'git --help'."
msgstr "git：'%s' 不是一个 git 命令。参见 'git --help'。"
-#: help.c:399 help.c:465
+#: help.c:414 help.c:480
msgid ""
"\n"
"Did you mean this?"
"\n"
"您指的是这其中的某一个么？"
-#: help.c:461
+#: help.c:476
#, c-format
msgid "%s: %s - %s"
msgstr "%s：%s - %s"
-#: ident.c:334
+#: ident.c:343
msgid ""
"\n"
"*** Please tell me who you are.\n"
"来设置您账号的缺省身份标识。\n"
"如果仅在本仓库设置身份标识，则省略 --global 参数。\n"
+#: ident.c:367
+msgid "no email was given and auto-detection is disabled"
+msgstr "未提供邮件地址且自动探测被禁用"
+
+#: ident.c:372
+#, c-format
+msgid "unable to auto-detect email address (got '%s')"
+msgstr "无法自动探测邮件地址（得到 '%s'）"
+
+#: ident.c:382
+msgid "no name was given and auto-detection is disabled"
+msgstr "未提供姓名且自动探测被禁用"
+
+#: ident.c:388
+#, c-format
+msgid "unable to auto-detect name (got '%s')"
+msgstr "无法自动探测姓名（得到 '%s'）"
+
+#: ident.c:396
+#, c-format
+msgid "empty ident name (for <%s>) not allowed"
+msgstr "不允许空的姓名（对于 <%s>）"
+
+#: ident.c:402
+#, c-format
+msgid "name consists only of disallowed characters: %s"
+msgstr "姓名中仅包含禁用字符：%s"
+
+#: ident.c:417 builtin/commit.c:611
+#, c-format
+msgid "invalid date format: %s"
+msgstr "无效的日期格式：%s"
+
#: lockfile.c:152
#, c-format
msgid ""
msgid "failed to read the cache"
msgstr "无法读取缓存"
-#: merge.c:96 builtin/am.c:2000 builtin/am.c:2035 builtin/checkout.c:374
-#: builtin/checkout.c:588 builtin/clone.c:731
+#: merge.c:96 builtin/am.c:1999 builtin/am.c:2034 builtin/checkout.c:393
+#: builtin/checkout.c:607 builtin/clone.c:749
msgid "unable to write new index file"
msgstr "无法写新的索引文件"
msgid "(bad commit)\n"
msgstr "（坏提交）\n"
-#: merge-recursive.c:231
+#: merge-recursive.c:231 merge-recursive.c:239
#, c-format
msgid "addinfo_cache failed for path '%s'"
msgstr "为路径 '%s' addinfo_cache 失败"
-#: merge-recursive.c:301
+#: merge-recursive.c:303
msgid "error building trees"
msgstr "无法创建树"
-#: merge-recursive.c:720
+#: merge-recursive.c:727
#, c-format
msgid "failed to create path '%s'%s"
msgstr "无法创建路径 '%s'%s"
-#: merge-recursive.c:731
+#: merge-recursive.c:738
#, c-format
msgid "Removing %s to make room for subdirectory\n"
msgstr "删除 %s 以便为子目录留出空间\n"
-#: merge-recursive.c:745 merge-recursive.c:764
+#: merge-recursive.c:752 merge-recursive.c:771
msgid ": perhaps a D/F conflict?"
msgstr "：可能是一个目录/文件冲突？"
-#: merge-recursive.c:754
+#: merge-recursive.c:761
#, c-format
msgid "refusing to lose untracked file at '%s'"
msgstr "拒绝丢弃 '%s' 中的未跟踪文件"
-#: merge-recursive.c:796 builtin/cat-file.c:34
+#: merge-recursive.c:803 builtin/cat-file.c:34
#, c-format
msgid "cannot read object %s '%s'"
msgstr "不能读取对象 %s '%s'"
-#: merge-recursive.c:798
+#: merge-recursive.c:805
#, c-format
msgid "blob expected for %s '%s'"
msgstr "%s '%s' 应为数据对象"
-#: merge-recursive.c:822
+#: merge-recursive.c:829
#, c-format
msgid "failed to open '%s': %s"
msgstr "无法打开 '%s'：%s"
-#: merge-recursive.c:833
+#: merge-recursive.c:840
#, c-format
msgid "failed to symlink '%s': %s"
msgstr "无法创建符号链接 '%s'：%s"
-#: merge-recursive.c:838
+#: merge-recursive.c:845
#, c-format
msgid "do not know what to do with %06o %s '%s'"
msgstr "不知道如何处理 %06o %s '%s'"
-#: merge-recursive.c:978
+#: merge-recursive.c:985
msgid "Failed to execute internal merge"
msgstr "无法执行内部合并"
-#: merge-recursive.c:982
+#: merge-recursive.c:989
#, c-format
msgid "Unable to add %s to database"
msgstr "不能添加 %s 至对象库"
-#: merge-recursive.c:1081 merge-recursive.c:1095
+#: merge-recursive.c:1092
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"in tree."
msgstr ""
-"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %5$s 中被 %4$s。%7$s 在 %6$s 中"
-"的版本被保留。"
+"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %5$s 中被 %4$s。%7$s 的 %6$s 版"
+"本被保留。"
-#: merge-recursive.c:1087 merge-recursive.c:1100
+#: merge-recursive.c:1097
+#, c-format
+msgid ""
+"CONFLICT (%s/delete): %s deleted in %s and %s to %s in %s. Version %s of %s "
+"left in tree."
+msgstr ""
+"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %6$s 中的 %5$s 被 %4$s。%8$s 的 "
+"%7$s 版本被保留。"
+
+#: merge-recursive.c:1104
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"in tree at %s."
msgstr ""
-"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %5$s 中被 %4$s。%7$s 在 %6$s 中"
-"的版本保留于 %8$s 中。"
+"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %5$s 中被 %4$s。%7$s 的 %6$s 版"
+"本保留在 %8$s 中。"
+
+#: merge-recursive.c:1109
+#, c-format
+msgid ""
+"CONFLICT (%s/delete): %s deleted in %s and %s to %s in %s. Version %s of %s "
+"left in tree at %s."
+msgstr ""
+"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %6$s 中的 %5$s 被 %4$s。%8$s 的 "
+"%7$s 版本保留在 %9$s 中。"
#: merge-recursive.c:1143
msgid "rename"
msgid "Renaming %s to %s and %s to %s instead"
msgstr "而是重命名 %s 至 %s，以及 %s 至 %s"
-#: merge-recursive.c:1531
+#: merge-recursive.c:1528
#, c-format
msgid "CONFLICT (rename/add): Rename %s->%s in %s. %s added in %s"
msgstr "冲突（重命名/添加）：在 %3$s 中重命名 %1$s->%2$s。在 %5$s 中添加 %4$s"
-#: merge-recursive.c:1546
+#: merge-recursive.c:1543
#, c-format
msgid "Adding merged %s"
msgstr "添加合并后的 %s"
-#: merge-recursive.c:1553 merge-recursive.c:1766
+#: merge-recursive.c:1550 merge-recursive.c:1780
#, c-format
msgid "Adding as %s instead"
msgstr "而是以 %s 为名添加"
-#: merge-recursive.c:1610
+#: merge-recursive.c:1607
#, c-format
msgid "cannot read object %s"
msgstr "不能读取对象 %s"
-#: merge-recursive.c:1613
+#: merge-recursive.c:1610
#, c-format
msgid "object %s is not a blob"
msgstr "对象 %s 不是一个数据对象"
-#: merge-recursive.c:1666
+#: merge-recursive.c:1679
msgid "modify"
msgstr "修改"
-#: merge-recursive.c:1666
+#: merge-recursive.c:1679
msgid "modified"
msgstr "修改"
-#: merge-recursive.c:1676
+#: merge-recursive.c:1689
msgid "content"
msgstr "内容"
-#: merge-recursive.c:1683
+#: merge-recursive.c:1696
msgid "add/add"
msgstr "添加/添加"
-#: merge-recursive.c:1718
+#: merge-recursive.c:1732
#, c-format
msgid "Skipped %s (merged same as existing)"
msgstr "略过 %s（已经做过相同合并）"
-#: merge-recursive.c:1732
+#: merge-recursive.c:1746
#, c-format
msgid "Auto-merging %s"
msgstr "自动合并 %s"
-#: merge-recursive.c:1736 git-submodule.sh:924
+#: merge-recursive.c:1750 git-submodule.sh:944
msgid "submodule"
msgstr "子模组"
-#: merge-recursive.c:1737
+#: merge-recursive.c:1751
#, c-format
msgid "CONFLICT (%s): Merge conflict in %s"
msgstr "冲突（%s）：合并冲突于 %s"
-#: merge-recursive.c:1831
+#: merge-recursive.c:1845
#, c-format
msgid "Removing %s"
msgstr "删除 %s"
-#: merge-recursive.c:1857
+#: merge-recursive.c:1871
msgid "file/directory"
msgstr "文件/目录"
-#: merge-recursive.c:1863
+#: merge-recursive.c:1877
msgid "directory/file"
msgstr "目录/文件"
-#: merge-recursive.c:1868
+#: merge-recursive.c:1883
#, c-format
msgid "CONFLICT (%s): There is a directory with name %s in %s. Adding %s as %s"
msgstr "冲突（%1$s）：在 %3$s 中有一个名为 %2$s 的目录。以 %5$s 为名添加 %4$s"
-#: merge-recursive.c:1877
+#: merge-recursive.c:1892
#, c-format
msgid "Adding %s"
msgstr "添加 %s"
-#: merge-recursive.c:1914
+#: merge-recursive.c:1929
msgid "Already up-to-date!"
msgstr "已经是最新的！"
-#: merge-recursive.c:1923
+#: merge-recursive.c:1938
#, c-format
msgid "merging of trees %s and %s failed"
msgstr "无法合并树 %s 和 %s"
-#: merge-recursive.c:2006
+#: merge-recursive.c:2021
msgid "Merging:"
msgstr "合并："
-#: merge-recursive.c:2019
+#: merge-recursive.c:2034
#, c-format
msgid "found %u common ancestor:"
msgid_plural "found %u common ancestors:"
msgstr[0] "发现 %u 个共同祖先："
msgstr[1] "发现 %u 个共同祖先："
-#: merge-recursive.c:2058
+#: merge-recursive.c:2073
msgid "merge returned no commit"
msgstr "合并未返回提交"
-#: merge-recursive.c:2121
+#: merge-recursive.c:2136
#, c-format
msgid "Could not parse object '%s'"
msgstr "不能解析对象 '%s'"
-#: merge-recursive.c:2135 builtin/merge.c:641 builtin/merge.c:788
+#: merge-recursive.c:2150 builtin/merge.c:645 builtin/merge.c:792
msgid "Unable to write index."
msgstr "不能写入索引。"
"Please, use 'git notes merge --commit' or 'git notes merge --abort' to "
"commit/abort the previous merge before you start a new notes merge."
msgstr ""
-"您尚未结束您前一次注释合并（存在 %s）。\n"
-"请您在开始一个新的注释合并之前，使用 'git notes merge --commit' 或者 'git "
+"您的前一次注释合并尚未结束（存在 %s）。\n"
+"在开始一个新的注释合并之前，请使用 'git notes merge --commit' 或者 'git "
"notes merge --abort' 来提交/终止前一次合并。"
#: notes-merge.c:280
msgid "Bad %s value: '%s'"
msgstr "坏的 %s 值：'%s'"
-#: object.c:242
+#: object.c:240
#, c-format
msgid "unable to parse object: %s"
msgstr "不能解析对象：%s"
msgid "malformed object name '%s'"
msgstr "非法的对象名 '%s'"
-#: path.c:826
+#: path.c:810
#, c-format
msgid "Could not make %s writable by group"
msgstr "不能设置 %s 为组可写"
-#: pathspec.c:133
+#: pathspec.c:125
+msgid "Escape character '\\' not allowed as last character in attr value"
+msgstr "转义字符 '\\' 不能作为属性值的最后一个字符"
+
+#: pathspec.c:143
+msgid "Only one 'attr:' specification is allowed."
+msgstr "只允许一个 'attr:' 规格。"
+
+#: pathspec.c:146
+msgid "attr spec must not be empty"
+msgstr "属性规格不能为空"
+
+#: pathspec.c:189
+#, c-format
+msgid "invalid attribute name %s"
+msgstr "无效的属性名 %s"
+
+#: pathspec.c:254
msgid "global 'glob' and 'noglob' pathspec settings are incompatible"
msgstr "全局的 'glob' 和 'noglob' 路径规格设置不兼容"
-#: pathspec.c:143
+#: pathspec.c:261
msgid ""
"global 'literal' pathspec setting is incompatible with all other global "
"pathspec settings"
msgstr "全局的 'literal' 路径规格设置和其它的全局路径规格设置不兼容"
-#: pathspec.c:177
+#: pathspec.c:301
msgid "invalid parameter for pathspec magic 'prefix'"
msgstr "路径规格包含无效的神奇前缀"
-#: pathspec.c:183
+#: pathspec.c:322
#, c-format
msgid "Invalid pathspec magic '%.*s' in '%s'"
msgstr "在路径规格 '%3$s' 中无效的神奇前缀 '%2$.*1$s'"
-#: pathspec.c:187
+#: pathspec.c:327
#, c-format
msgid "Missing ')' at the end of pathspec magic in '%s'"
msgstr "路径规格 '%s' 的神奇前缀结尾少了一个 ')'"
-#: pathspec.c:205
+#: pathspec.c:365
#, c-format
msgid "Unimplemented pathspec magic '%c' in '%s'"
msgstr "路径规格 '%2$s' 中包含未实现的神奇前缀 '%1$c'"
-#: pathspec.c:230
+#: pathspec.c:421 pathspec.c:443
+#, c-format
+msgid "Pathspec '%s' is in submodule '%.*s'"
+msgstr "路径规格 '%s' 在子模组 '%.*s' 中"
+
+#: pathspec.c:483
#, c-format
msgid "%s: 'literal' and 'glob' are incompatible"
msgstr "%s：'literal' 和 'glob' 不兼容"
-#: pathspec.c:241
+#: pathspec.c:496
#, c-format
msgid "%s: '%s' is outside repository"
msgstr "%s：'%s' 在仓库之外"
-#: pathspec.c:291
+#: pathspec.c:584
#, c-format
-msgid "Pathspec '%s' is in submodule '%.*s'"
-msgstr "路径规格 '%s' 在子模组 '%.*s' 中"
+msgid "'%s' (mnemonic: '%c')"
+msgstr "'%s'（助记符：'%c'）"
-#: pathspec.c:353
+#: pathspec.c:594
#, c-format
msgid "%s: pathspec magic not supported by this command: %s"
msgstr "%s：路径规格神奇前缀不被此命令支持：%s"
-#: pathspec.c:408
+#: pathspec.c:644
msgid ""
"empty strings as pathspecs will be made invalid in upcoming releases. please "
"use . instead if you meant to match all paths"
msgstr ""
-"在即将到来的版本，不能再使用空字符串作为路径表达式。如果要匹配所有路径，\n"
+"在下一个版本中，使用空字符串作为路径规格将被视作非法。如果要匹配所有路径，\n"
"请代之以 ."
-#: pathspec.c:440
+#: pathspec.c:668
#, c-format
msgid "pathspec '%s' is beyond a symbolic link"
msgstr "路径规格 '%s' 位于符号链接中"
-#: pathspec.c:449
-msgid ""
-"There is nothing to exclude from by :(exclude) patterns.\n"
-"Perhaps you forgot to add either ':/' or '.' ?"
-msgstr ""
-"没有为 :(exclude) 模式提供要忽略的内容。也许您忘记了\n"
-"添加 ':/' 或 '.' ？"
-
-#: pretty.c:971
+#: pretty.c:982
msgid "unable to parse --pretty format"
msgstr "不能解析 --pretty 格式"
-#: read-cache.c:1315
+#: read-cache.c:1442
#, c-format
msgid ""
"index.version set, but the value is invalid.\n"
"设置了 index.version，但是取值无效。\n"
"使用版本 %i"
-#: read-cache.c:1325
+#: read-cache.c:1452
#, c-format
msgid ""
"GIT_INDEX_VERSION set, but the value is invalid.\n"
"设置了 GIT_INDEX_VERSION，但是取值无效。\n"
"使用版本 %i"
-#: refs.c:576 builtin/merge.c:840
+#: read-cache.c:2375 sequencer.c:1350 sequencer.c:2048
+#, c-format
+msgid "could not stat '%s'"
+msgstr "不能对 '%s' 调用 stat"
+
+#: read-cache.c:2388
+#, c-format
+msgid "unable to open git dir: %s"
+msgstr "不能打开 git 目录：%s"
+
+#: read-cache.c:2400
+#, c-format
+msgid "unable to unlink: %s"
+msgstr "无法删除：%s"
+
+#: refs.c:620 builtin/merge.c:844
#, c-format
msgid "Could not open '%s' for writing"
msgstr "无法打开 '%s' 进行写入"
-#: refs/files-backend.c:2481
+#: refs.c:1667
+msgid "ref updates forbidden inside quarantine environment"
+msgstr "在隔离环境中禁止更新引用"
+
+#: refs/files-backend.c:1631
#, c-format
msgid "could not delete reference %s: %s"
msgstr "无法删除引用 %s：%s"
-#: refs/files-backend.c:2484
+#: refs/files-backend.c:1634
#, c-format
msgid "could not delete references: %s"
msgstr "无法删除引用：%s"
-#: refs/files-backend.c:2493
+#: refs/files-backend.c:1643
#, c-format
msgid "could not remove reference %s"
msgstr "无法删除引用 %s"
-#: ref-filter.c:55
+#: ref-filter.c:35 wt-status.c:1780
+msgid "gone"
+msgstr "丢失"
+
+#: ref-filter.c:36
+#, c-format
+msgid "ahead %d"
+msgstr "领先 %d"
+
+#: ref-filter.c:37
+#, c-format
+msgid "behind %d"
+msgstr "落后 %d"
+
+#: ref-filter.c:38
+#, c-format
+msgid "ahead %d, behind %d"
+msgstr "领先 %d，落后 %d"
+
+#: ref-filter.c:104
#, c-format
msgid "expected format: %%(color:<color>)"
msgstr "期望的格式：%%(color:<color>)"
-#: ref-filter.c:57
+#: ref-filter.c:106
#, c-format
msgid "unrecognized color: %%(color:%s)"
msgstr "未能识别的颜色：%%(color:%s)"
-#: ref-filter.c:71
+#: ref-filter.c:120
#, c-format
-msgid "unrecognized format: %%(%s)"
-msgstr "æ\9cªè\83½è¯\86å\88«ç\9a\84æ ¼å¼\8fï¼\9a%%(%s)"
+msgid "Integer value expected refname:lstrip=%s"
+msgstr "æ\9c\9fæ\9c\9bæ\95´æ\95°å\80¼ refname:lstrip=%s"
-#: ref-filter.c:77
+#: ref-filter.c:124
+#, c-format
+msgid "Integer value expected refname:rstrip=%s"
+msgstr "期望整数值 refname:rstrip=%s"
+
+#: ref-filter.c:126
+#, c-format
+msgid "unrecognized %%(%s) argument: %s"
+msgstr "未能识别的 %%(%s) 参数：%s"
+
+#: ref-filter.c:166
#, c-format
msgid "%%(body) does not take arguments"
msgstr "%%(body) 不带参数"
-#: ref-filter.c:84
+#: ref-filter.c:173
#, c-format
msgid "%%(subject) does not take arguments"
msgstr "%%(subject) 不带参数"
-#: ref-filter.c:101
+#: ref-filter.c:180
+#, c-format
+msgid "%%(trailers) does not take arguments"
+msgstr "%%(trailers) 不带参数"
+
+#: ref-filter.c:199
#, c-format
msgid "positive value expected contents:lines=%s"
-msgstr "要为 contents:lines=%s 提供一个正数"
+msgstr "期望一个正数 contents:lines=%s"
-#: ref-filter.c:103
+#: ref-filter.c:201
#, c-format
msgid "unrecognized %%(contents) argument: %s"
msgstr "未能识别的 %%(contents) 参数：%s"
-#: ref-filter.c:113
+#: ref-filter.c:214
+#, c-format
+msgid "positive value expected objectname:short=%s"
+msgstr "期望一个正数 objectname:short=%s"
+
+#: ref-filter.c:218
#, c-format
msgid "unrecognized %%(objectname) argument: %s"
msgstr "未能识别的 %%(objectname) 参数：%s"
-#: ref-filter.c:135
+#: ref-filter.c:245
#, c-format
msgid "expected format: %%(align:<width>,<position>)"
msgstr "期望的格式：%%(align:<width>,<position>)"
-#: ref-filter.c:147
+#: ref-filter.c:257
#, c-format
msgid "unrecognized position:%s"
msgstr "未能识别的位置：%s"
-#: ref-filter.c:151
+#: ref-filter.c:261
#, c-format
msgid "unrecognized width:%s"
msgstr "未能识别的宽度：%s"
-#: ref-filter.c:157
+#: ref-filter.c:267
#, c-format
msgid "unrecognized %%(align) argument: %s"
msgstr "未能识别的 %%(align) 参数：%s"
-#: ref-filter.c:161
+#: ref-filter.c:271
#, c-format
msgid "positive width expected with the %%(align) atom"
msgstr "元素 %%(align) 需要一个正数的宽度"
-#: ref-filter.c:244
+#: ref-filter.c:286
+#, c-format
+msgid "unrecognized %%(if) argument: %s"
+msgstr "未能识别的 %%(if) 参数：%s"
+
+#: ref-filter.c:371
#, c-format
msgid "malformed field name: %.*s"
msgstr "非法的字段名：%.*s"
-#: ref-filter.c:270
+#: ref-filter.c:397
#, c-format
msgid "unknown field name: %.*s"
msgstr "未知的字段名：%.*s"
-#: ref-filter.c:372
+#: ref-filter.c:501
+#, c-format
+msgid "format: %%(if) atom used without a %%(then) atom"
+msgstr "格式：使用了 %%(if) 元素而没有 %%(then) 元素"
+
+#: ref-filter.c:561
+#, c-format
+msgid "format: %%(then) atom used without an %%(if) atom"
+msgstr "格式：使用了 %%(then) 元素而没有 %%(if) 元素"
+
+#: ref-filter.c:563
+#, c-format
+msgid "format: %%(then) atom used more than once"
+msgstr "格式：%%(then) 元素用了多次"
+
+#: ref-filter.c:565
+#, c-format
+msgid "format: %%(then) atom used after %%(else)"
+msgstr "格式：%%(then) 元素用在了 %%(else) 之后"
+
+#: ref-filter.c:591
+#, c-format
+msgid "format: %%(else) atom used without an %%(if) atom"
+msgstr "格式：使用了 %%(else) 元素而没有 %%(if) 元素"
+
+#: ref-filter.c:593
+#, c-format
+msgid "format: %%(else) atom used without a %%(then) atom"
+msgstr "格式：使用了 %%(else) 元素而没有 %%(then) 元素"
+
+#: ref-filter.c:595
+#, c-format
+msgid "format: %%(else) atom used more than once"
+msgstr "格式：%%(else) 元素用了多次"
+
+#: ref-filter.c:608
#, c-format
msgid "format: %%(end) atom used without corresponding atom"
msgstr "格式：使用了 %%(end) 元素却没有它的对应元素"
-#: ref-filter.c:424
+#: ref-filter.c:663
#, c-format
msgid "malformed format string %s"
msgstr "非法的格式化字符串 %s"
-#: ref-filter.c:878
-msgid ":strip= requires a positive integer argument"
-msgstr ":strip= 需要一个正整型参数"
+#: ref-filter.c:1247
+#, c-format
+msgid "(no branch, rebasing %s)"
+msgstr "（非分支，正变基 %s）"
+
+#: ref-filter.c:1250
+#, c-format
+msgid "(no branch, bisect started on %s)"
+msgstr "（非分支，二分查找开始于 %s）"
-#: ref-filter.c:883
+#. TRANSLATORS: make sure this matches
+#. "HEAD detached at " in wt-status.c
+#: ref-filter.c:1256
#, c-format
-msgid "ref '%s' does not have %ld components to :strip"
-msgstr "引用 '%s' 未提供用于 :strip 的 %ld 个组件"
+msgid "(HEAD detached at %s)"
+msgstr "（头指针分离于 %s）"
-#: ref-filter.c:1046
+#. TRANSLATORS: make sure this matches
+#. "HEAD detached from " in wt-status.c
+#: ref-filter.c:1261
#, c-format
-msgid "unknown %.*s format %s"
-msgstr "未知的 %.*s 格式 %s"
+msgid "(HEAD detached from %s)"
+msgstr "（头指针分离自 %s）"
+
+#: ref-filter.c:1265
+msgid "(no branch)"
+msgstr "（非分支）"
-#: ref-filter.c:1066 ref-filter.c:1097
+#: ref-filter.c:1420 ref-filter.c:1451
#, c-format
msgid "missing object %s for %s"
msgstr "缺失 %2$s 的对象 %1$s"
-#: ref-filter.c:1069 ref-filter.c:1100
+#: ref-filter.c:1423 ref-filter.c:1454
#, c-format
msgid "parse_object_buffer failed on %s for %s"
msgstr "parse_object_buffer 失败于 %2$s 的 %1$s"
-#: ref-filter.c:1311
+#: ref-filter.c:1692
#, c-format
msgid "malformed object at '%s'"
msgstr "非法的对象于 '%s'"
-#: ref-filter.c:1373
+#: ref-filter.c:1759
#, c-format
msgid "ignoring ref with broken name %s"
msgstr "忽略带有错误名称 %s 的引用"
-#: ref-filter.c:1378
+#: ref-filter.c:1764
#, c-format
msgid "ignoring broken ref %s"
msgstr "忽略损坏的引用 %s"
-#: ref-filter.c:1633
+#: ref-filter.c:2028
#, c-format
msgid "format: %%(end) atom missing"
msgstr "格式：缺少 %%(end) 元素"
-#: ref-filter.c:1687
+#: ref-filter.c:2109
#, c-format
msgid "malformed object name %s"
msgstr "非法的对象名 %s"
-#: remote.c:746
+#: remote.c:754
#, c-format
msgid "Cannot fetch both %s and %s to %s"
msgstr "不能同时获取 %s 和 %s 至 %s"
-#: remote.c:750
+#: remote.c:758
#, c-format
msgid "%s usually tracks %s, not %s"
msgstr "%s 通常跟踪 %s，而非 %s"
-#: remote.c:754
+#: remote.c:762
#, c-format
msgid "%s tracks both %s and %s"
msgstr "%s 同时跟踪 %s 和 %s"
-#: remote.c:762
+#: remote.c:770
msgid "Internal error"
msgstr "内部错误"
-#: remote.c:1677 remote.c:1720
+#: remote.c:1685 remote.c:1787
msgid "HEAD does not point to a branch"
msgstr "HEAD 没有指向一个分支"
-#: remote.c:1686
+#: remote.c:1694
#, c-format
msgid "no such branch: '%s'"
msgstr "没有此分支：'%s'"
-#: remote.c:1689
+#: remote.c:1697
#, c-format
msgid "no upstream configured for branch '%s'"
msgstr "尚未给分支 '%s' 设置上游"
-#: remote.c:1695
+#: remote.c:1703
#, c-format
msgid "upstream branch '%s' not stored as a remote-tracking branch"
msgstr "上游分支 '%s' 没有存储为一个远程跟踪分支"
-#: remote.c:1710
+#: remote.c:1718
#, c-format
msgid "push destination '%s' on remote '%s' has no local tracking branch"
msgstr "推送目标 '%s' 至远程 '%s' 没有本地跟踪分支"
-#: remote.c:1725
+#: remote.c:1730
#, c-format
msgid "branch '%s' has no remote for pushing"
msgstr "分支 '%s' 没有设置要推送的远程服务器"
-#: remote.c:1736
+#: remote.c:1741
#, c-format
msgid "push refspecs for '%s' do not include '%s'"
msgstr "向 '%s' 推送引用规格未包含 '%s'"
-#: remote.c:1749
+#: remote.c:1754
msgid "push has no destination (push.default is 'nothing')"
msgstr "推送无目标（push.default 是 'nothing'）"
-#: remote.c:1771
+#: remote.c:1776
msgid "cannot resolve 'simple' push to a single destination"
msgstr "无法解析 'simple' 推送至一个单独的目标"
-#: remote.c:2073
+#: remote.c:2081
#, c-format
msgid "Your branch is based on '%s', but the upstream is gone.\n"
msgstr "您的分支基于 '%s'，但此上游分支已经不存在。\n"
-#: remote.c:2077
+#: remote.c:2085
msgid " (use \"git branch --unset-upstream\" to fixup)\n"
msgstr " （使用 \"git branch --unset-upstream\" 来修复）\n"
-#: remote.c:2080
+#: remote.c:2088
#, c-format
msgid "Your branch is up-to-date with '%s'.\n"
msgstr "您的分支与上游分支 '%s' 一致。\n"
-#: remote.c:2084
+#: remote.c:2092
#, c-format
msgid "Your branch is ahead of '%s' by %d commit.\n"
msgid_plural "Your branch is ahead of '%s' by %d commits.\n"
msgstr[0] "您的分支领先 '%s' 共 %d 个提交。\n"
msgstr[1] "您的分支领先 '%s' 共 %d 个提交。\n"
-#: remote.c:2090
+#: remote.c:2098
msgid " (use \"git push\" to publish your local commits)\n"
msgstr " （使用 \"git push\" 来发布您的本地提交）\n"
-#: remote.c:2093
+#: remote.c:2101
#, c-format
msgid "Your branch is behind '%s' by %d commit, and can be fast-forwarded.\n"
msgid_plural ""
msgstr[1] "您的分支落后 '%s' 共 %d 个提交，并且可以快进。\n"
# 译者：注意保持前导空格
-#: remote.c:2101
+#: remote.c:2109
msgid " (use \"git pull\" to update your local branch)\n"
msgstr " （使用 \"git pull\" 来更新您的本地分支）\n"
-#: remote.c:2104
+#: remote.c:2112
#, c-format
msgid ""
"Your branch and '%s' have diverged,\n"
"并且分别有 %d 和 %d 处不同的提交。\n"
# 译者：注意保持前导空格
-#: remote.c:2114
+#: remote.c:2122
msgid " (use \"git pull\" to merge the remote branch into yours)\n"
msgstr " （使用 \"git pull\" 来合并远程分支）\n"
msgid "--first-parent is incompatible with --bisect"
msgstr "--first-parent 与 --bisect 不兼容"
-#: run-command.c:106
+#: run-command.c:125
msgid "open /dev/null failed"
msgstr "不能打开 /dev/null"
-#: run-command.c:108
+#: run-command.c:127
#, c-format
msgid "dup2(%d,%d) failed"
msgstr "不能调用 dup2(%d,%d)"
-#: send-pack.c:297
+#: send-pack.c:150
+#, c-format
+msgid "unable to parse remote unpack status: %s"
+msgstr "不能解析远程解包状态：%s"
+
+#: send-pack.c:152
+#, c-format
+msgid "remote unpack failed: %s"
+msgstr "远程解包失败：%s"
+
+#: send-pack.c:315
msgid "failed to sign the push certificate"
msgstr "无法为推送证书签名"
-#: send-pack.c:410
+#: send-pack.c:428
msgid "the receiving end does not support --signed push"
msgstr "接收端不支持签名推送"
-#: send-pack.c:412
+#: send-pack.c:430
msgid ""
"not sending a push certificate since the receiving end does not support --"
"signed push"
msgstr "未发送推送证书，因为接收端不支持签名推送"
-#: send-pack.c:424
+#: send-pack.c:442
msgid "the receiving end does not support --atomic push"
msgstr "接收端不支持原子推送"
-#: send-pack.c:429
+#: send-pack.c:447
msgid "the receiving end does not support push options"
msgstr "接收端不支持推送选项"
-#: sequencer.c:171
+#: sequencer.c:215
msgid "revert"
msgstr "还原"
-#: sequencer.c:171
+#: sequencer.c:217
msgid "cherry-pick"
msgstr "拣选"
-#: sequencer.c:228
+#: sequencer.c:219
+msgid "rebase -i"
+msgstr "rebase -i"
+
+#: sequencer.c:221
+#, c-format
+msgid "Unknown action: %d"
+msgstr "未知动作：%d"
+
+#: sequencer.c:278
msgid ""
"after resolving the conflicts, mark the corrected paths\n"
"with 'git add <paths>' or 'git rm <paths>'"
"冲突解决完毕后，用 'git add <路径>' 或 'git rm <路径>'\n"
"命令标记修正后的文件"
-#: sequencer.c:231
+#: sequencer.c:281
msgid ""
"after resolving the conflicts, mark the corrected paths\n"
"with 'git add <paths>' or 'git rm <paths>'\n"
"冲突解决完毕后，用 'git add <路径>' 或 'git rm <路径>'\n"
"对修正后的文件做标记，然后用 'git commit' 提交"
-#: sequencer.c:244 sequencer.c:1209
+#: sequencer.c:294 sequencer.c:1682
#, c-format
msgid "could not lock '%s'"
msgstr "不能锁定 '%s'"
-#: sequencer.c:247 sequencer.c:1125 sequencer.c:1214
+#: sequencer.c:297 sequencer.c:1560 sequencer.c:1687 sequencer.c:1701
#, c-format
msgid "could not write to '%s'"
msgstr "不能写入 '%s'"
-#: sequencer.c:251
+#: sequencer.c:301
#, c-format
msgid "could not write eol to '%s'"
msgstr "不能将换行符写入 '%s'"
-#: sequencer.c:255 sequencer.c:1130 sequencer.c:1216
+#: sequencer.c:305 sequencer.c:1565 sequencer.c:1689
#, c-format
msgid "failed to finalize '%s'."
msgstr "无法完成 '%s'。"
-#: sequencer.c:279 builtin/am.c:259 builtin/commit.c:749 builtin/merge.c:1032
+#: sequencer.c:329 sequencer.c:814 sequencer.c:1586 builtin/am.c:257
+#: builtin/commit.c:749 builtin/merge.c:1018
#, c-format
msgid "could not read '%s'"
msgstr "不能读取 '%s'"
-#: sequencer.c:305
+#: sequencer.c:355
#, c-format
msgid "your local changes would be overwritten by %s."
msgstr "您的本地修改将被%s覆盖。"
-#: sequencer.c:309
+#: sequencer.c:359
msgid "commit your changes or stash them to proceed."
msgstr "提交您的修改或保存进度后再继续。"
-#: sequencer.c:324
+#: sequencer.c:388
#, c-format
msgid "%s: fast-forward"
msgstr "%s：快进"
-#. TRANSLATORS: %s will be "revert" or "cherry-pick"
-#: sequencer.c:399
+#. TRANSLATORS: %s will be "revert", "cherry-pick" or
+#. * "rebase -i".
+#.
+#: sequencer.c:470
#, c-format
msgid "%s: Unable to write new index file"
msgstr "%s：无法写入新索引文件"
-#: sequencer.c:418
+#: sequencer.c:489
msgid "could not resolve HEAD commit\n"
msgstr "不能解析 HEAD 提交\n"
-#: sequencer.c:438
+#: sequencer.c:509
msgid "unable to update cache tree\n"
-msgstr "不能更新缓存\n"
+msgstr "不能更新缓存树\n"
-#: sequencer.c:483
+#: sequencer.c:592
#, c-format
msgid ""
"you have staged changes in your working tree\n"
"\n"
" git rebase --continue\n"
msgstr ""
-"您已暂存了工作区的修改。如果这些修改要压缩到前一个提交，执行：\n"
+"您的工作区中存在已暂存的修改\n"
+"如果这些修改需要被并入前一个提交，执行：\n"
"\n"
" git commit --amend %s\n"
"\n"
-"如果这些变更要形成一个新提交，执行：\n"
+"如果这些修改要形成一个新提交，执行：\n"
"\n"
" git commit %s\n"
"\n"
"\n"
" git rebase --continue\n"
-#: sequencer.c:567
+#: sequencer.c:694
#, c-format
msgid "could not parse commit %s\n"
msgstr "不能解析提交 %s\n"
-#: sequencer.c:572
+#: sequencer.c:699
#, c-format
msgid "could not parse parent commit %s\n"
msgstr "不能解析父提交 %s\n"
-#: sequencer.c:656
+#: sequencer.c:821
+#, c-format
+msgid ""
+"unexpected 1st line of squash message:\n"
+"\n"
+"\t%.*s"
+msgstr ""
+"意外的压缩提交首行提交信息：\n"
+"\n"
+"\t%.*s"
+
+#: sequencer.c:827
+#, c-format
+msgid ""
+"invalid 1st line of squash message:\n"
+"\n"
+"\t%.*s"
+msgstr ""
+"压缩提交的首行提交信息无效：\n"
+"\n"
+"\t%.*s"
+
+#: sequencer.c:833 sequencer.c:858
+#, c-format
+msgid "This is a combination of %d commits."
+msgstr "这是一个 %d 个提交的组合。"
+
+#: sequencer.c:842
+msgid "need a HEAD to fixup"
+msgstr "需要一个 HEAD 来修复"
+
+#: sequencer.c:844
+msgid "could not read HEAD"
+msgstr "不能读取 HEAD"
+
+#: sequencer.c:846
+msgid "could not read HEAD's commit message"
+msgstr "不能读取 HEAD 的提交说明"
+
+#: sequencer.c:852
+#, c-format
+msgid "cannot write '%s'"
+msgstr "不能写 '%s'"
+
+#: sequencer.c:861 git-rebase--interactive.sh:445
+msgid "This is the 1st commit message:"
+msgstr "这是第一个提交说明："
+
+#: sequencer.c:869
+#, c-format
+msgid "could not read commit message of %s"
+msgstr "不能读取 %s 的提交说明"
+
+#: sequencer.c:876
+#, c-format
+msgid "This is the commit message #%d:"
+msgstr "这是提交说明 #%d："
+
+#: sequencer.c:881
+#, c-format
+msgid "The commit message #%d will be skipped:"
+msgstr "提交说明 #%d 将被跳过："
+
+#: sequencer.c:886
+#, c-format
+msgid "unknown command: %d"
+msgstr "未知命令：%d"
+
+#: sequencer.c:952
msgid "your index file is unmerged."
msgstr "您的索引文件未完成合并。"
-#: sequencer.c:675
+#: sequencer.c:970
#, c-format
msgid "commit %s is a merge but no -m option was given."
msgstr "提交 %s 是一个合并提交但未提供 -m 选项。"
-#: sequencer.c:683
+#: sequencer.c:978
#, c-format
msgid "commit %s does not have parent %d"
msgstr "提交 %s 没有第 %d 个父提交"
-#: sequencer.c:687
+#: sequencer.c:982
#, c-format
msgid "mainline was specified but commit %s is not a merge."
msgstr "指定了主线，但是提交 %s 不是一个合并提交。"
+#: sequencer.c:988
+#, c-format
+msgid "cannot get commit message for %s"
+msgstr "不能得到 %s 的提交说明"
+
#. TRANSLATORS: The first %s will be a "todo" command like
#. "revert" or "pick", the second %s a SHA1.
-#: sequencer.c:700
+#: sequencer.c:1009
#, c-format
msgid "%s: cannot parse parent commit %s"
msgstr "%s：不能解析父提交 %s"
-#: sequencer.c:705
+#: sequencer.c:1071 sequencer.c:1827
#, c-format
-msgid "cannot get commit message for %s"
-msgstr "ä¸\8dè\83½å¾\97å\88° %s ç\9a\84æ\8f\90交说æ\98\8e"
+msgid "could not rename '%s' to '%s'"
+msgstr "ä¸\8dè\83½å°\86 '%s' é\87\8då\91½å\90\8d为 '%s'"
-#: sequencer.c:797
+#: sequencer.c:1122
#, c-format
msgid "could not revert %s... %s"
msgstr "不能还原 %s... %s"
-#: sequencer.c:798
+#: sequencer.c:1123
#, c-format
msgid "could not apply %s... %s"
msgstr "不能应用 %s... %s"
-#: sequencer.c:833
+#: sequencer.c:1165
msgid "empty commit set passed"
msgstr "提供了空的提交集"
-#: sequencer.c:843
+#: sequencer.c:1175
#, c-format
msgid "git %s: failed to read the index"
msgstr "git %s：无法读取索引"
-#: sequencer.c:850
+#: sequencer.c:1182
#, c-format
msgid "git %s: failed to refresh the index"
msgstr "git %s：无法刷新索引"
-#: sequencer.c:944
+#: sequencer.c:1303
#, c-format
msgid "invalid line %d: %.*s"
msgstr "无效行 %d：%.*s"
-#: sequencer.c:950
-msgid "no commits parsed."
-msgstr "没有解析提交。"
+#: sequencer.c:1311
+#, c-format
+msgid "cannot '%s' without a previous commit"
+msgstr "没有父提交的情况下不能 '%s'"
-#: sequencer.c:966
+#: sequencer.c:1344
#, c-format
msgid "could not read '%s'."
msgstr "不能读取 '%s'。"
-#: sequencer.c:972
+#: sequencer.c:1356
+msgid "please fix this using 'git rebase --edit-todo'."
+msgstr "请用 'git rebase --edit-todo' 来修改。"
+
+#: sequencer.c:1358
#, c-format
msgid "unusable instruction sheet: '%s'"
-msgstr "无用的指令清单：'%s'"
+msgstr "不可用的指令清单：'%s'"
-#: sequencer.c:983
+#: sequencer.c:1363
+msgid "no commits parsed."
+msgstr "没有解析提交。"
+
+#: sequencer.c:1374
msgid "cannot cherry-pick during a revert."
msgstr "不能在回退中执行拣选。"
-#: sequencer.c:985
+#: sequencer.c:1376
msgid "cannot revert during a cherry-pick."
msgstr "不能在拣选中执行回退。"
-#: sequencer.c:1028
+#: sequencer.c:1439
#, c-format
msgid "invalid key: %s"
msgstr "无效键名：%s"
-#: sequencer.c:1031
+#: sequencer.c:1442
#, c-format
msgid "invalid value for %s: %s"
msgstr "%s 的值无效：%s"
-#: sequencer.c:1063
+#: sequencer.c:1499
#, c-format
msgid "malformed options sheet: '%s'"
msgstr "非法的选项清单：'%s'"
-#: sequencer.c:1101
+#: sequencer.c:1537
msgid "a cherry-pick or revert is already in progress"
msgstr "一个拣选或还原操作已在进行"
-#: sequencer.c:1102
+#: sequencer.c:1538
msgid "try \"git cherry-pick (--continue | --quit | --abort)\""
msgstr "尝试 \"git cherry-pick (--continue | --quit | --abort)\""
-#: sequencer.c:1106
+#: sequencer.c:1541
#, c-format
msgid "could not create sequencer directory '%s'"
msgstr "不能创建序列目录 '%s'"
-#: sequencer.c:1120
+#: sequencer.c:1555
msgid "could not lock HEAD"
msgstr "不能锁定 HEAD"
-#: sequencer.c:1151 sequencer.c:1289
+#: sequencer.c:1611 sequencer.c:2181
msgid "no cherry-pick or revert in progress"
msgstr "拣选或还原操作并未进行"
-#: sequencer.c:1153
+#: sequencer.c:1613
msgid "cannot resolve HEAD"
msgstr "不能解析 HEAD"
-#: sequencer.c:1155 sequencer.c:1189
+#: sequencer.c:1615 sequencer.c:1649
msgid "cannot abort from a branch yet to be born"
msgstr "不能从尚未建立的分支终止"
-#: sequencer.c:1175 builtin/grep.c:578
+#: sequencer.c:1635 builtin/grep.c:910
#, c-format
msgid "cannot open '%s'"
msgstr "不能打开 '%s'"
-#: sequencer.c:1177
+#: sequencer.c:1637
#, c-format
msgid "cannot read '%s': %s"
msgstr "不能读取 '%s'：%s"
-#: sequencer.c:1178
+#: sequencer.c:1638
msgid "unexpected end of file"
msgstr "意外的文件结束"
-#: sequencer.c:1184
+#: sequencer.c:1644
#, c-format
msgid "stored pre-cherry-pick HEAD file '%s' is corrupt"
msgstr "保存拣选提交前的 HEAD 文件 '%s' 损坏"
-#: sequencer.c:1354
+#: sequencer.c:1655
+msgid "You seem to have moved HEAD. Not rewinding, check your HEAD!"
+msgstr "您好像移动了 HEAD。未能回退，检查您的 HEAD！"
+
+#: sequencer.c:1792 sequencer.c:2080
+msgid "cannot read HEAD"
+msgstr "不能读取 HEAD"
+
+#: sequencer.c:1832 builtin/difftool.c:616
+#, c-format
+msgid "could not copy '%s' to '%s'"
+msgstr "不能拷贝 '%s' 至 '%s'"
+
+#: sequencer.c:1848
+msgid "could not read index"
+msgstr "不能读取索引"
+
+# 译者：注意保持前导空格
+#: sequencer.c:1853
+#, c-format
+msgid ""
+"execution failed: %s\n"
+"%sYou can fix the problem, and then run\n"
+"\n"
+" git rebase --continue\n"
+"\n"
+msgstr ""
+"执行失败：%s\n"
+"%s您可以改正该问题，然后运行\n"
+"\n"
+" git rebase --continue\n"
+"\n"
+
+#: sequencer.c:1859
+msgid "and made changes to the index and/or the working tree\n"
+msgstr "并且修改索引和/或工作区\n"
+
+#: sequencer.c:1865
+#, c-format
+msgid ""
+"execution succeeded: %s\n"
+"but left changes to the index and/or the working tree\n"
+"Commit or stash your changes, and then run\n"
+"\n"
+" git rebase --continue\n"
+"\n"
+msgstr ""
+"执行成功：%s\n"
+"但是在索引和/或工作区中存在变更\n"
+"提交或暂存修改，然后运行\n"
+"\n"
+" git rebase --continue\n"
+"\n"
+
+#: sequencer.c:1920 git-rebase.sh:169
+#, c-format
+msgid "Applied autostash."
+msgstr "成功应用 autostash。"
+
+#: sequencer.c:1932
+#, c-format
+msgid "cannot store %s"
+msgstr "不能存储 %s"
+
+#: sequencer.c:1934 git-rebase.sh:173
+#, c-format
+msgid ""
+"Applying autostash resulted in conflicts.\n"
+"Your changes are safe in the stash.\n"
+"You can run \"git stash pop\" or \"git stash drop\" at any time.\n"
+msgstr ""
+"应用 autostash 导致冲突。\n"
+"您的修改安全地保存在 stash 中。\n"
+"您可以在任何时候运行 \"git stash pop\" 或 \"git stash drop\"。\n"
+
+#: sequencer.c:2016
+#, c-format
+msgid "Stopped at %s... %.*s\n"
+msgstr "停止在 %s... %.*s\n"
+
+#: sequencer.c:2058
+#, c-format
+msgid "unknown command %d"
+msgstr "未知命令 %d"
+
+#: sequencer.c:2088
+msgid "could not read orig-head"
+msgstr "不能读取 orig-head"
+
+#: sequencer.c:2092
+msgid "could not read 'onto'"
+msgstr "不能读取 'onto'"
+
+#: sequencer.c:2099
+#, c-format
+msgid "could not update %s"
+msgstr "不能更新 %s"
+
+#: sequencer.c:2106
+#, c-format
+msgid "could not update HEAD to %s"
+msgstr "不能更新 HEAD 为 %s"
+
+#: sequencer.c:2190
+msgid "cannot rebase: You have unstaged changes."
+msgstr "不能变基：您有未暂存的变更。"
+
+#: sequencer.c:2195
+msgid "could not remove CHERRY_PICK_HEAD"
+msgstr "不能删除 CHERRY_PICK_HEAD"
+
+#: sequencer.c:2204
+msgid "cannot amend non-existing commit"
+msgstr "不能修补不存在的提交"
+
+#: sequencer.c:2206
+#, c-format
+msgid "invalid file: '%s'"
+msgstr "无效文件：'%s'"
+
+#: sequencer.c:2208
+#, c-format
+msgid "invalid contents: '%s'"
+msgstr "无效内容：'%s'"
+
+#: sequencer.c:2211
+msgid ""
+"\n"
+"You have uncommitted changes in your working tree. Please, commit them\n"
+"first and then run 'git rebase --continue' again."
+msgstr ""
+"\n"
+"您的工作区中有未提交的变更。请先提交然后再次运行 'git rebase --continue'。"
+
+#: sequencer.c:2221
+msgid "could not commit staged changes."
+msgstr "不能提交暂存的修改。"
+
+#: sequencer.c:2301
#, c-format
msgid "%s: can't cherry-pick a %s"
msgstr "%s：不能拣选一个%s"
-#: sequencer.c:1358
+#: sequencer.c:2305
#, c-format
msgid "%s: bad revision"
msgstr "%s：错误的版本"
-#: sequencer.c:1391
+#: sequencer.c:2338
msgid "can't revert as initial commit"
msgstr "不能作为初始提交回退"
-#: setup.c:160
+#: setup.c:165
#, c-format
msgid ""
"%s: no such path in the working tree.\n"
"%s：工作区中无此路径。\n"
"使用命令 'git <command> -- <path>...' 来指定本地不存在的路径。"
-#: setup.c:173
+#: setup.c:178
#, c-format
msgid ""
"ambiguous argument '%s': unknown revision or path not in the working tree.\n"
"使用 '--' 来分隔版本和路径，例如：\n"
"'git <command> [<revision>...] -- [<file>...]'"
-#: setup.c:223
+#: setup.c:228
#, c-format
msgid ""
"ambiguous argument '%s': both revision and filename\n"
"使用 '--' 来分隔版本和路径，例如：\n"
"'git <command> [<revision>...] -- [<file>...]'"
-#: setup.c:468
+#: setup.c:475
#, c-format
msgid "Expected git repo version <= %d, found %d"
msgstr "期望 git 仓库版本 <= %d，却得到 %d"
-#: setup.c:476
+#: setup.c:483
msgid "unknown repository extensions found:"
msgstr "发现未知的仓库扩展："
-#: setup.c:762
+#: setup.c:776
#, c-format
msgid "Not a git repository (or any of the parent directories): %s"
msgstr "不是一个 git 仓库（或者任何父目录）：%s"
-#: setup.c:764 setup.c:915 builtin/index-pack.c:1641
+#: setup.c:778 builtin/index-pack.c:1646
msgid "Cannot come back to cwd"
msgstr "无法返回当前工作目录"
-#: setup.c:845
+#: setup.c:1010
msgid "Unable to read current working directory"
msgstr "不能读取当前工作目录"
-#: setup.c:920
+#: setup.c:1022 setup.c:1028
+#, c-format
+msgid "Cannot change to '%s'"
+msgstr "不能切换到 '%s'"
+
+#: setup.c:1041
#, c-format
msgid ""
"Not a git repository (or any parent up to mount point %s)\n"
"不是一个 git 仓库（或者向上递归至挂载点 %s 的任何祖先目录）\n"
"停止在文件系统边界（未设置 GIT_DISCOVERY_ACROSS_FILESYSTEM）。"
-#: setup.c:927
-#, c-format
-msgid "Cannot change to '%s/..'"
-msgstr "不能切换到 '%s/..'"
-
-#: setup.c:989
+#: setup.c:1106
#, c-format
msgid ""
"Problem with core.sharedRepository filemode value (0%.3o).\n"
"参数 core.sharedRepository 的文件权限值有错（0%.3o）。\n"
"文件属主必须始终拥有读写权限。"
-#: sha1_file.c:473
+#: sha1_file.c:559
#, c-format
msgid "path '%s' does not exist"
msgstr "路径 '%s' 不存在"
-#: sha1_file.c:499
+#: sha1_file.c:585
#, c-format
msgid "reference repository '%s' as a linked checkout is not supported yet."
msgstr "尚不支持将参考仓库 '%s' 作为一个链接检出。"
-#: sha1_file.c:505
+#: sha1_file.c:591
#, c-format
msgid "reference repository '%s' is not a local repository."
msgstr "参考仓库 '%s' 不是一个本地仓库。"
-#: sha1_file.c:511
+#: sha1_file.c:597
#, c-format
msgid "reference repository '%s' is shallow"
msgstr "参考仓库 '%s' 是一个浅克隆"
-#: sha1_file.c:519
+#: sha1_file.c:605
#, c-format
msgid "reference repository '%s' is grafted"
msgstr "参考仓库 '%s' 已被嫁接"
-#: sha1_file.c:1159
+#: sha1_file.c:1245
msgid "offset before end of packfile (broken .idx?)"
msgstr "偏移量在包文件结束之前（损坏的 .idx？）"
-#: sha1_file.c:2592
+#: sha1_file.c:2721
#, c-format
msgid "offset before start of pack index for %s (corrupt index?)"
msgstr "偏移量在 %s 的包索引开始之前（损坏的索引？）"
-#: sha1_file.c:2596
+#: sha1_file.c:2725
#, c-format
msgid "offset beyond end of pack index for %s (truncated index?)"
msgstr "偏移量越过了 %s 的包索引的结尾（被截断的索引？）"
-#: sha1_name.c:407
+#: sha1_name.c:409
#, c-format
msgid "short SHA1 %s is ambiguous"
-msgstr "歧义的短 SHA1 %s"
+msgstr "短 SHA1 %s 存在歧义"
-#: sha1_name.c:418
+#: sha1_name.c:420
msgid "The candidates are:"
msgstr "候选者有："
-#: sha1_name.c:578
+#: sha1_name.c:580
msgid ""
"Git normally never creates a ref that ends with 40 hex characters\n"
"because it will be ignored when you just specify 40-hex. These refs\n"
"可能需要删除它们。用 \"git config advice.objectNameWarning false\"\n"
"命令关闭本消息通知。"
-#: submodule.c:64 submodule.c:98
+#: submodule.c:67 submodule.c:101
msgid "Cannot change unmerged .gitmodules, resolve merge conflicts first"
msgstr "无法修改未合并的 .gitmodules，先解决合并冲突"
-#: submodule.c:68 submodule.c:102
+#: submodule.c:71 submodule.c:105
#, c-format
msgid "Could not find section in .gitmodules where path=%s"
msgstr "无法在 .gitmodules 中找到 path=%s 的小节"
-#: submodule.c:76
+#: submodule.c:79
#, c-format
msgid "Could not update .gitmodules entry %s"
msgstr "不能更新 .gitmodules 条目 %s"
-#: submodule.c:109
+#: submodule.c:112
#, c-format
msgid "Could not remove .gitmodules entry for %s"
msgstr "无法移除 %s 的 .gitmodules 条目"
-#: submodule.c:120
+#: submodule.c:123
msgid "staging updated .gitmodules failed"
msgstr "将更新后 .gitmodules 添加暂存区失败"
-#: submodule.c:158
+#: submodule.c:161
msgid "negative values not allowed for submodule.fetchJobs"
msgstr "submodule.fetchJobs 不允许为负值"
-#: submodule-config.c:358
+#: submodule.c:1194
+#, c-format
+msgid "'%s' not recognized as a git repository"
+msgstr "无法将 '%s' 识别为一个 git 仓库"
+
+#: submodule.c:1332
+#, c-format
+msgid "could not start 'git status' in submodule '%s'"
+msgstr "无法在子模组 '%s' 中启动 'git status'"
+
+#: submodule.c:1345
+#, c-format
+msgid "could not run 'git status' in submodule '%s'"
+msgstr "无法在子模组 '%s' 中执行 'git status'"
+
+#: submodule.c:1421
+#, c-format
+msgid "submodule '%s' has dirty index"
+msgstr "子模组 '%s' 中有脏索引"
+
+#: submodule.c:1678
+#, c-format
+msgid ""
+"relocate_gitdir for submodule '%s' with more than one worktree not supported"
+msgstr "不支持对有多个工作区的子模组 '%s' 执行 relocate_gitdir"
+
+#: submodule.c:1690 submodule.c:1746
+#, c-format
+msgid "could not lookup name for submodule '%s'"
+msgstr "不能查询子模组 '%s' 的名称"
+
+#: submodule.c:1694 builtin/submodule--helper.c:678
+#: builtin/submodule--helper.c:688
+#, c-format
+msgid "could not create directory '%s'"
+msgstr "不能创建目录 '%s'"
+
+#: submodule.c:1697
+#, c-format
+msgid ""
+"Migrating git directory of '%s%s' from\n"
+"'%s' to\n"
+"'%s'\n"
+msgstr ""
+"将 '%s%s' 的 git 目录从\n"
+"'%s' 迁移至\n"
+"'%s'\n"
+
+#: submodule.c:1781
+#, c-format
+msgid "could not recurse into submodule '%s'"
+msgstr "无法递归进子模组路径 '%s'"
+
+#: submodule.c:1825
+msgid "could not start ls-files in .."
+msgstr "无法在 .. 中启动 ls-files"
+
+#: submodule.c:1845
+msgid "BUG: returned path string doesn't match cwd?"
+msgstr "BUG：返回的路径和当前路径不匹配？"
+
+#: submodule.c:1864
+#, c-format
+msgid "ls-tree returned unexpected return code %d"
+msgstr "ls-tree 返回未知返回值 %d"
+
+#: submodule-config.c:380
#, c-format
msgid "invalid value for %s"
msgstr "%s 的值无效"
-#: trailer.c:238
+#: trailer.c:240
#, c-format
msgid "running trailer command '%s' failed"
msgstr "执行 trailer 命令 '%s' 失败"
-#: trailer.c:471 trailer.c:475 trailer.c:479 trailer.c:533 trailer.c:537
-#: trailer.c:541
+#: trailer.c:473 trailer.c:477 trailer.c:481 trailer.c:535 trailer.c:539
+#: trailer.c:543
#, c-format
msgid "unknown value '%s' for key '%s'"
msgstr "键 '%2$s' 的未知取值 '%1$s'"
-#: trailer.c:523 trailer.c:528 builtin/remote.c:289
+#: trailer.c:525 trailer.c:530 builtin/remote.c:289
#, c-format
msgid "more than one %s"
msgstr "多于一个 %s"
-#: trailer.c:672
+#: trailer.c:702
#, c-format
msgid "empty trailer token in trailer '%.*s'"
msgstr "签名 '%.*s' 的键为空"
-#: trailer.c:695
+#: trailer.c:722
#, c-format
msgid "could not read input file '%s'"
msgstr "不能读取输入文件 '%s'"
-#: trailer.c:698
+#: trailer.c:725
msgid "could not read from stdin"
msgstr "不能自标准输入读取"
-#: trailer.c:929 builtin/am.c:44
+#: trailer.c:949 builtin/am.c:44
#, c-format
msgid "could not stat %s"
-msgstr "不能获取 %s 的文件状态"
+msgstr "不能对 %s 调用 stat"
-#: trailer.c:931
+#: trailer.c:951
#, c-format
msgid "file %s is not a regular file"
msgstr "文件 %s 不是一个正规文件"
-#: trailer.c:933
+#: trailer.c:953
#, c-format
msgid "file %s is not writable by user"
msgstr "文件 %s 用户不可写"
-#: trailer.c:945
+#: trailer.c:965
msgid "could not open temporary file"
msgstr "不能打开临时文件"
-#: trailer.c:983
+#: trailer.c:1001
#, c-format
msgid "could not rename temporary file to %s"
msgstr "不能重命名临时文件为 %s"
msgid "transport: invalid depth option '%s'"
msgstr "传输：无效的深度选项 '%s'"
-#: transport.c:817
+#: transport.c:889
#, c-format
msgid ""
"The following submodule paths contain changes that can\n"
"not be found on any remote:\n"
msgstr "下列子模组路径所包含的修改在任何远程源中都找不到：\n"
-#: transport.c:821
+#: transport.c:893
#, c-format
msgid ""
"\n"
"以推送至远程。\n"
"\n"
-#: transport.c:829
+#: transport.c:901
msgid "Aborting."
msgstr "正在终止。"
-#: transport-helper.c:1075
+#: transport-helper.c:1080
#, c-format
msgid "Could not read ref %s"
msgstr "不能读取引用 %s"
#: tree-walk.c:37
msgid "malformed mode in tree entry"
-msgstr "树对象中的条目属性错误"
+msgstr "树对象中的条目模式错误"
#: tree-walk.c:41
msgid "empty filename in tree entry"
msgid "too-short tree file"
msgstr "太短的树文件"
-#: unpack-trees.c:64
+#: unpack-trees.c:104
#, c-format
msgid ""
"Your local changes to the following files would be overwritten by checkout:\n"
"您对下列文件的本地修改将被检出操作覆盖：\n"
"%%s请在切换分支前提交您的修改或者保存进度。"
-#: unpack-trees.c:66
+#: unpack-trees.c:106
#, c-format
msgid ""
"Your local changes to the following files would be overwritten by checkout:\n"
"您对下列文件的本地修改将被检出操作覆盖：\n"
"%%s"
-#: unpack-trees.c:69
+#: unpack-trees.c:109
#, c-format
msgid ""
"Your local changes to the following files would be overwritten by merge:\n"
"您对下列文件的本地修改将被合并操作覆盖：\n"
"%%s请在合并前提交您的修改或者保存进度。"
-#: unpack-trees.c:71
+#: unpack-trees.c:111
#, c-format
msgid ""
"Your local changes to the following files would be overwritten by merge:\n"
"您对下列文件的本地修改将被合并操作覆盖：\n"
"%%s"
-#: unpack-trees.c:74
+#: unpack-trees.c:114
#, c-format
msgid ""
"Your local changes to the following files would be overwritten by %s:\n"
"您对下列文件的本地修改将被 %s 覆盖：\n"
"%%s请在 %s 之前提交您的修改或者保存进度。"
-#: unpack-trees.c:76
+#: unpack-trees.c:116
#, c-format
msgid ""
"Your local changes to the following files would be overwritten by %s:\n"
"您对下列文件的本地修改将被 %s 覆盖：\n"
"%%s"
-#: unpack-trees.c:81
+#: unpack-trees.c:121
#, c-format
msgid ""
-"Updating the following directories would lose untracked files in it:\n"
+"Updating the following directories would lose untracked files in them:\n"
"%s"
msgstr ""
"更新如下目录将会丢失其中未跟踪的文件：\n"
"%s"
-#: unpack-trees.c:85
+#: unpack-trees.c:125
#, c-format
msgid ""
"The following untracked working tree files would be removed by checkout:\n"
"工作区中下列未跟踪的文件将会因为检出操作而被删除：\n"
"%%s请在切换分支之前移动或删除。"
-#: unpack-trees.c:87
+#: unpack-trees.c:127
#, c-format
msgid ""
"The following untracked working tree files would be removed by checkout:\n"
"工作区中下列未跟踪的文件将会因为检出操作而被删除：\n"
"%%s"
-#: unpack-trees.c:90
+#: unpack-trees.c:130
#, c-format
msgid ""
"The following untracked working tree files would be removed by merge:\n"
"工作区中下列未跟踪的文件将会因为合并操作而被删除：\n"
"%%s请在合并前移动或删除。"
-#: unpack-trees.c:92
+#: unpack-trees.c:132
#, c-format
msgid ""
"The following untracked working tree files would be removed by merge:\n"
"工作区中下列未跟踪的文件将会因为合并操作而被删除：\n"
"%%s"
-#: unpack-trees.c:95
+#: unpack-trees.c:135
#, c-format
msgid ""
"The following untracked working tree files would be removed by %s:\n"
"工作区中下列未跟踪的文件将会因为 %s 操作而被删除：\n"
"%%s请在 %s 前移动或删除。"
-#: unpack-trees.c:97
+#: unpack-trees.c:137
#, c-format
msgid ""
"The following untracked working tree files would be removed by %s:\n"
"工作区中下列未跟踪的文件将会因为 %s 操作而被删除：\n"
"%%s"
-#: unpack-trees.c:102
+#: unpack-trees.c:142
#, c-format
msgid ""
"The following untracked working tree files would be overwritten by "
"工作区中下列未跟踪的文件将会因为检出操作而被覆盖：\n"
"%%s请在切换分支前移动或删除。"
-#: unpack-trees.c:104
+#: unpack-trees.c:144
#, c-format
msgid ""
"The following untracked working tree files would be overwritten by "
"工作区中下列未跟踪的文件将会因为检出操作而被覆盖：\n"
"%%s"
-#: unpack-trees.c:107
+#: unpack-trees.c:147
#, c-format
msgid ""
"The following untracked working tree files would be overwritten by merge:\n"
"工作区中下列未跟踪的文件将会因为合并操作而被覆盖：\n"
"%%s请在合并前移动或删除。"
-#: unpack-trees.c:109
+#: unpack-trees.c:149
#, c-format
msgid ""
"The following untracked working tree files would be overwritten by merge:\n"
"工作区中下列未跟踪的文件将会因为合并操作而被覆盖：\n"
"%%s"
-#: unpack-trees.c:112
+#: unpack-trees.c:152
#, c-format
msgid ""
"The following untracked working tree files would be overwritten by %s:\n"
"工作区中下列未跟踪的文件将会因为 %s 操作而被覆盖：\n"
"%%s请在 %s 前移动或删除。"
-#: unpack-trees.c:114
+#: unpack-trees.c:154
#, c-format
msgid ""
"The following untracked working tree files would be overwritten by %s:\n"
"工作区中下列未跟踪的文件将会因为 %s 操作而被覆盖：\n"
"%%s"
-#: unpack-trees.c:121
+#: unpack-trees.c:161
#, c-format
msgid "Entry '%s' overlaps with '%s'. Cannot bind."
msgstr "条目 '%s' 和 '%s' 重叠。无法合并。"
-#: unpack-trees.c:124
+#: unpack-trees.c:164
#, c-format
msgid ""
"Cannot update sparse checkout: the following entries are not up-to-date:\n"
"无法更新稀疏检出：如下条目不是最新：\n"
"%s"
-#: unpack-trees.c:126
+#: unpack-trees.c:166
#, c-format
msgid ""
"The following working tree files would be overwritten by sparse checkout "
"工作区中下列文件将被稀疏检出更新所覆盖：\n"
"%s"
-#: unpack-trees.c:128
+#: unpack-trees.c:168
#, c-format
msgid ""
"The following working tree files would be removed by sparse checkout "
"工作区中下列文件将被稀疏检出更新所删除：\n"
"%s"
-#: unpack-trees.c:205
+#: unpack-trees.c:170
+#, c-format
+msgid ""
+"Cannot update submodule:\n"
+"%s"
+msgstr ""
+"无法更新子模组：\n"
+"%s"
+
+#: unpack-trees.c:247
#, c-format
msgid "Aborting\n"
msgstr "终止中\n"
-#: unpack-trees.c:237
+#: unpack-trees.c:272
+#, c-format
+msgid "submodule update strategy not supported for submodule '%s'"
+msgstr "子模组 %s 不支持子模组更新策略"
+
+#: unpack-trees.c:340
msgid "Checking out files"
msgstr "正在检出文件"
-#: urlmatch.c:120
+#: urlmatch.c:163
msgid "invalid URL scheme name or missing '://' suffix"
msgstr "无效的 URL 方案名称或丢失 '://' 后缀"
-#: urlmatch.c:144 urlmatch.c:297 urlmatch.c:356
+#: urlmatch.c:187 urlmatch.c:346 urlmatch.c:405
#, c-format
msgid "invalid %XX escape sequence"
msgstr "无效的 %XX 转义序列"
-#: urlmatch.c:172
+#: urlmatch.c:215
msgid "missing host and scheme is not 'file:'"
msgstr "缺失主机名且 URL 方案不是 'file:'"
-#: urlmatch.c:189
+#: urlmatch.c:232
msgid "a 'file:' URL may not have a port number"
msgstr "一个 'file:' URL 不应该包含端口号"
-#: urlmatch.c:199
+#: urlmatch.c:247
msgid "invalid characters in host name"
msgstr "主机名中包含无效的字符"
-#: urlmatch.c:244 urlmatch.c:255
+#: urlmatch.c:292 urlmatch.c:303
msgid "invalid port number"
msgstr "无效的端口号"
-#: urlmatch.c:322
+#: urlmatch.c:371
msgid "invalid '..' path segment"
msgstr "无效的 '..' 路径片段"
-#: worktree.c:282
+#: worktree.c:285
#, c-format
msgid "failed to read '%s'"
msgstr "无法读取 '%s'"
msgid "could not open '%s' for writing"
msgstr "无法打开 '%s' 进行写入"
-#: wrapper.c:226 wrapper.c:396 builtin/am.c:320 builtin/am.c:759
-#: builtin/am.c:847 builtin/commit.c:1705 builtin/merge.c:1029
+#: wrapper.c:226 wrapper.c:396 builtin/am.c:318 builtin/am.c:757
+#: builtin/am.c:849 builtin/commit.c:1700 builtin/merge.c:1015
#: builtin/pull.c:341
#, c-format
msgid "could not open '%s' for reading"
msgstr "无法打开 '%s' 进行读取"
-#: wrapper.c:605 wrapper.c:626
+#: wrapper.c:581 wrapper.c:602
#, c-format
msgid "unable to access '%s'"
msgstr "不能访问 '%s'"
-#: wrapper.c:634
+#: wrapper.c:610
msgid "unable to get current working directory"
msgstr "不能获取当前工作目录"
-#: wrapper.c:658
+#: wrapper.c:634
#, c-format
msgid "could not write to %s"
msgstr "不能写入 %s"
-#: wrapper.c:660
+#: wrapper.c:636
#, c-format
msgid "could not close %s"
msgstr "不能关闭 %s"
msgid " (use \"git rm <file>...\" to mark resolution)"
msgstr " （使用 \"git rm <文件>...\" 标记解决方案）"
-#: wt-status.c:199 wt-status.c:945
+#: wt-status.c:199 wt-status.c:958
msgid "Changes to be committed:"
msgstr "要提交的变更："
-#: wt-status.c:217 wt-status.c:954
+#: wt-status.c:217 wt-status.c:967
msgid "Changes not staged for commit:"
msgstr "尚未暂存以备提交的变更："
msgid "untracked content, "
msgstr "未跟踪的内容, "
-#: wt-status.c:818
+#: wt-status.c:831
msgid "Submodules changed but not updated:"
msgstr "子模组已修改但尚未更新："
-#: wt-status.c:820
+#: wt-status.c:833
msgid "Submodule changes to be committed:"
msgstr "要提交的子模组变更："
-#: wt-status.c:901
+#: wt-status.c:914
msgid ""
"Do not touch the line above.\n"
"Everything below will be removed."
"不要改动上面的一行。\n"
"下面的所有内容均将被删除。"
-#: wt-status.c:1013
+#: wt-status.c:1026
msgid "You have unmerged paths."
msgstr "您有尚未合并的路径。"
# 译者：注意保持前导空格
-#: wt-status.c:1016
+#: wt-status.c:1029
msgid " (fix conflicts and run \"git commit\")"
msgstr " （解决冲突并运行 \"git commit\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1018
+#: wt-status.c:1031
msgid " (use \"git merge --abort\" to abort the merge)"
msgstr " （使用 \"git merge --abort\" 终止合并）"
-#: wt-status.c:1023
+#: wt-status.c:1036
msgid "All conflicts fixed but you are still merging."
msgstr "所有冲突已解决但您仍处于合并中。"
# 译者：注意保持前导空格
-#: wt-status.c:1026
+#: wt-status.c:1039
msgid " (use \"git commit\" to conclude merge)"
msgstr " （使用 \"git commit\" 结束合并）"
-#: wt-status.c:1036
+#: wt-status.c:1049
msgid "You are in the middle of an am session."
msgstr "您正处于 am 操作过程中。"
-#: wt-status.c:1039
+#: wt-status.c:1052
msgid "The current patch is empty."
msgstr "当前的补丁为空。"
# 译者：注意保持前导空格
-#: wt-status.c:1043
+#: wt-status.c:1056
msgid " (fix conflicts and then run \"git am --continue\")"
msgstr " （解决冲突，然后运行 \"git am --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1045
+#: wt-status.c:1058
msgid " (use \"git am --skip\" to skip this patch)"
msgstr " （使用 \"git am --skip\" 跳过此补丁）"
# 译者：注意保持前导空格
-#: wt-status.c:1047
+#: wt-status.c:1060
msgid " (use \"git am --abort\" to restore the original branch)"
msgstr " （使用 \"git am --abort\" 恢复原有分支）"
-#: wt-status.c:1172
+#: wt-status.c:1189
+msgid "git-rebase-todo is missing."
+msgstr "git-rebase-todo 丢失。"
+
+#: wt-status.c:1191
msgid "No commands done."
msgstr "没有命令被执行。"
-#: wt-status.c:1175
+#: wt-status.c:1194
#, c-format
msgid "Last command done (%d command done):"
msgid_plural "Last commands done (%d commands done):"
msgstr[0] "最后一条命令已完成（%d 条命令被执行）："
msgstr[1] "最后的命令已完成（%d 条命令被执行）："
-#: wt-status.c:1186
+#: wt-status.c:1205
#, c-format
msgid " (see more in file %s)"
msgstr " （更多参见文件 %s）"
-#: wt-status.c:1191
+#: wt-status.c:1210
msgid "No commands remaining."
msgstr "未剩下任何命令。"
-#: wt-status.c:1194
+#: wt-status.c:1213
#, c-format
msgid "Next command to do (%d remaining command):"
msgid_plural "Next commands to do (%d remaining commands):"
msgstr[1] "接下来要执行的命令（剩余 %d 条命令）："
# 译者：注意保持前导空格
-#: wt-status.c:1202
+#: wt-status.c:1221
msgid " (use \"git rebase --edit-todo\" to view and edit)"
msgstr " （使用 \"git rebase --edit-todo\" 来查看和编辑）"
-#: wt-status.c:1215
+#: wt-status.c:1234
#, c-format
msgid "You are currently rebasing branch '%s' on '%s'."
msgstr "您在执行将分支 '%s' 变基到 '%s' 的操作。"
-#: wt-status.c:1220
+#: wt-status.c:1239
msgid "You are currently rebasing."
msgstr "您在执行变基操作。"
# 译者：注意保持前导空格
-#: wt-status.c:1234
+#: wt-status.c:1253
msgid " (fix conflicts and then run \"git rebase --continue\")"
msgstr " （解决冲突，然后运行 \"git rebase --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1236
+#: wt-status.c:1255
msgid " (use \"git rebase --skip\" to skip this patch)"
msgstr " （使用 \"git rebase --skip\" 跳过此补丁）"
# 译者：注意保持前导空格
-#: wt-status.c:1238
+#: wt-status.c:1257
msgid " (use \"git rebase --abort\" to check out the original branch)"
msgstr " （使用 \"git rebase --abort\" 以检出原有分支）"
# 译者：注意保持前导空格
-#: wt-status.c:1244
+#: wt-status.c:1263
msgid " (all conflicts fixed: run \"git rebase --continue\")"
msgstr " （所有冲突已解决：运行 \"git rebase --continue\"）"
-#: wt-status.c:1248
+#: wt-status.c:1267
#, c-format
msgid ""
"You are currently splitting a commit while rebasing branch '%s' on '%s'."
msgstr "您在执行将分支 '%s' 变基到 '%s' 的操作时拆分提交。"
-#: wt-status.c:1253
+#: wt-status.c:1272
msgid "You are currently splitting a commit during a rebase."
msgstr "您在执行变基操作时拆分提交。"
# 译者：注意保持前导空格
-#: wt-status.c:1256
+#: wt-status.c:1275
msgid " (Once your working directory is clean, run \"git rebase --continue\")"
msgstr " （一旦您工作目录提交干净后，运行 \"git rebase --continue\"）"
-#: wt-status.c:1260
+#: wt-status.c:1279
#, c-format
msgid "You are currently editing a commit while rebasing branch '%s' on '%s'."
msgstr "您在执行将分支 '%s' 变基到 '%s' 的操作时编辑提交。"
-#: wt-status.c:1265
+#: wt-status.c:1284
msgid "You are currently editing a commit during a rebase."
msgstr "您在执行变基操作时编辑提交。"
# 译者：注意保持前导空格
-#: wt-status.c:1268
+#: wt-status.c:1287
msgid " (use \"git commit --amend\" to amend the current commit)"
msgstr " （使用 \"git commit --amend\" 修补当前提交）"
# 译者：注意保持前导空格
-#: wt-status.c:1270
+#: wt-status.c:1289
msgid ""
" (use \"git rebase --continue\" once you are satisfied with your changes)"
msgstr " （当您对您的修改满意后执行 \"git rebase --continue\"）"
-#: wt-status.c:1280
+#: wt-status.c:1299
#, c-format
msgid "You are currently cherry-picking commit %s."
msgstr "您在执行拣选提交 %s 的操作。"
# 译者：注意保持前导空格
-#: wt-status.c:1285
+#: wt-status.c:1304
msgid " (fix conflicts and run \"git cherry-pick --continue\")"
msgstr " （解决冲突并运行 \"git cherry-pick --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1288
+#: wt-status.c:1307
msgid " (all conflicts fixed: run \"git cherry-pick --continue\")"
msgstr " （所有冲突已解决：运行 \"git cherry-pick --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1290
+#: wt-status.c:1309
msgid " (use \"git cherry-pick --abort\" to cancel the cherry-pick operation)"
msgstr " （使用 \"git cherry-pick --abort\" 以取消拣选操作）"
-#: wt-status.c:1299
+#: wt-status.c:1318
#, c-format
msgid "You are currently reverting commit %s."
msgstr "您在执行反转提交 %s 的操作。"
# 译者：注意保持前导空格
-#: wt-status.c:1304
+#: wt-status.c:1323
msgid " (fix conflicts and run \"git revert --continue\")"
msgstr " （解决冲突并运行 \"git revert --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1307
+#: wt-status.c:1326
msgid " (all conflicts fixed: run \"git revert --continue\")"
msgstr " （所有冲突已解决：运行 \"git revert --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:1309
+#: wt-status.c:1328
msgid " (use \"git revert --abort\" to cancel the revert operation)"
msgstr " （使用 \"git revert --abort\" 以取消反转提交操作）"
-#: wt-status.c:1320
+#: wt-status.c:1339
#, c-format
msgid "You are currently bisecting, started from branch '%s'."
msgstr "您在执行从分支 '%s' 开始的二分查找操作。"
-#: wt-status.c:1324
+#: wt-status.c:1343
msgid "You are currently bisecting."
msgstr "您在执行二分查找操作。"
# 译者：注意保持前导空格
-#: wt-status.c:1327
+#: wt-status.c:1346
msgid " (use \"git bisect reset\" to get back to the original branch)"
msgstr " （使用 \"git bisect reset\" 以回到原有分支）"
-#: wt-status.c:1524
+#: wt-status.c:1543
msgid "On branch "
msgstr "位于分支 "
-#: wt-status.c:1530
+#: wt-status.c:1549
msgid "interactive rebase in progress; onto "
msgstr "交互式变基操作正在进行中；至 "
-#: wt-status.c:1532
+#: wt-status.c:1551
msgid "rebase in progress; onto "
msgstr "变基操作正在进行中；至 "
-#: wt-status.c:1537
+#: wt-status.c:1556
msgid "HEAD detached at "
msgstr "头指针分离于 "
-#: wt-status.c:1539
+#: wt-status.c:1558
msgid "HEAD detached from "
msgstr "头指针分离自 "
-#: wt-status.c:1542
+#: wt-status.c:1561
msgid "Not currently on any branch."
msgstr "当前不在任何分支上。"
-#: wt-status.c:1560
+#: wt-status.c:1579
msgid "Initial commit"
msgstr "初始提交"
-#: wt-status.c:1574
+#: wt-status.c:1593
msgid "Untracked files"
msgstr "未跟踪的文件"
-#: wt-status.c:1576
+#: wt-status.c:1595
msgid "Ignored files"
msgstr "忽略的文件"
-#: wt-status.c:1580
+#: wt-status.c:1599
#, c-format
msgid ""
"It took %.2f seconds to enumerate untracked files. 'status -uno'\n"
"耗费了 %.2f 秒以枚举未跟踪的文件。'status -uno' 也许能提高速度，\n"
"但您需要小心不要忘了添加新文件（参见 'git help status'）。"
-#: wt-status.c:1586
+#: wt-status.c:1605
#, c-format
msgid "Untracked files not listed%s"
msgstr "未跟踪的文件没有列出%s"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1588
+#: wt-status.c:1607
msgid " (use -u option to show untracked files)"
msgstr "（使用 -u 参数显示未跟踪的文件）"
-#: wt-status.c:1594
+#: wt-status.c:1613
msgid "No changes"
msgstr "没有修改"
-#: wt-status.c:1599
+#: wt-status.c:1618
#, c-format
msgid "no changes added to commit (use \"git add\" and/or \"git commit -a\")\n"
msgstr "修改尚未加入提交（使用 \"git add\" 和/或 \"git commit -a\"）\n"
-#: wt-status.c:1602
+#: wt-status.c:1621
#, c-format
msgid "no changes added to commit\n"
msgstr "修改尚未加入提交\n"
-#: wt-status.c:1605
+#: wt-status.c:1624
#, c-format
msgid ""
"nothing added to commit but untracked files present (use \"git add\" to "
"track)\n"
msgstr "提交为空，但是存在尚未跟踪的文件（使用 \"git add\" 建立跟踪）\n"
-#: wt-status.c:1608
+#: wt-status.c:1627
#, c-format
msgid "nothing added to commit but untracked files present\n"
msgstr "提交为空，但是存在尚未跟踪的文件\n"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1611
+#: wt-status.c:1630
#, c-format
msgid "nothing to commit (create/copy files and use \"git add\" to track)\n"
msgstr "无文件要提交（创建/拷贝文件并使用 \"git add\" 建立跟踪）\n"
-#: wt-status.c:1614 wt-status.c:1619
+#: wt-status.c:1633 wt-status.c:1638
#, c-format
msgid "nothing to commit\n"
msgstr "无文件要提交\n"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1617
+#: wt-status.c:1636
#, c-format
msgid "nothing to commit (use -u to show untracked files)\n"
msgstr "无文件要提交（使用 -u 显示未跟踪的文件）\n"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1621
+#: wt-status.c:1640
#, c-format
msgid "nothing to commit, working tree clean\n"
msgstr "无文件要提交，干净的工作区\n"
# 译者：注意保持句尾空格
-#: wt-status.c:1728
+#: wt-status.c:1749
msgid "Initial commit on "
msgstr "初始提交于 "
-#: wt-status.c:1732
+#: wt-status.c:1753
msgid "HEAD (no branch)"
msgstr "HEAD（非分支）"
-#: wt-status.c:1761
-msgid "gone"
-msgstr "丢失"
-
# 译者：注意保持句尾空格
-#: wt-status.c:1763 wt-status.c:1771
+#: wt-status.c:1782 wt-status.c:1790
msgid "behind "
msgstr "落后 "
-#: wt-status.c:1766 wt-status.c:1769
+#: wt-status.c:1785 wt-status.c:1788
msgid "ahead "
msgstr "领先 "
#. TRANSLATORS: the action is e.g. "pull with rebase"
-#: wt-status.c:2270
+#: wt-status.c:2280
#, c-format
msgid "cannot %s: You have unstaged changes."
msgstr "不能%s：您有未暂存的变更。"
-#: wt-status.c:2276
+#: wt-status.c:2286
msgid "additionally, your index contains uncommitted changes."
-msgstr "而且您的索引中包含未提交的变更。"
+msgstr "另外，您的索引中包含未提交的变更。"
-#: wt-status.c:2278
+#: wt-status.c:2288
#, c-format
msgid "cannot %s: Your index contains uncommitted changes."
msgstr "不能%s：您的索引中包含未提交的变更。"
-#: compat/precompose_utf8.c:57 builtin/clone.c:414
+#: compat/precompose_utf8.c:57 builtin/clone.c:432
#, c-format
msgid "failed to unlink '%s'"
msgstr "无法删除 '%s'"
msgid "Unstaged changes after refreshing the index:"
msgstr "刷新索引之后尚未被暂存的变更："
-#: builtin/add.c:209 builtin/rev-parse.c:840
+#: builtin/add.c:209 builtin/rev-parse.c:872
msgid "Could not read the index"
msgstr "不能读取索引"
#: builtin/add.c:230
#, c-format
msgid "Could not stat '%s'"
-msgstr "不能查看文件状态 '%s'"
+msgstr "不能对 '%s' 调用 stat"
#: builtin/add.c:232
msgid "Empty patch. Aborted."
msgid "The following paths are ignored by one of your .gitignore files:\n"
msgstr "下列路径根据您的一个 .gitignore 文件而被忽略：\n"
-#: builtin/add.c:266 builtin/clean.c:870 builtin/fetch.c:115 builtin/mv.c:111
-#: builtin/prune-packed.c:55 builtin/pull.c:198 builtin/push.c:521
-#: builtin/remote.c:1326 builtin/rm.c:268 builtin/send-pack.c:162
+#: builtin/add.c:266 builtin/clean.c:876 builtin/fetch.c:115 builtin/mv.c:123
+#: builtin/prune-packed.c:55 builtin/pull.c:198 builtin/push.c:524
+#: builtin/remote.c:1328 builtin/rm.c:241 builtin/send-pack.c:163
msgid "dry run"
msgstr "演习"
msgid "interactive picking"
msgstr "交互式拣选"
-#: builtin/add.c:270 builtin/checkout.c:1156 builtin/reset.c:286
+#: builtin/add.c:270 builtin/checkout.c:1177 builtin/reset.c:286
msgid "select hunks interactively"
msgstr "交互式挑选数据块"
msgid "check if - even missing - files are ignored in dry run"
msgstr "检查在演习模式下文件（即使不存在）是否被忽略"
-#: builtin/add.c:283 builtin/update-index.c:947
+#: builtin/add.c:283 builtin/update-index.c:951
msgid "(+/-)x"
msgstr "(+/-)x"
-#: builtin/add.c:283 builtin/update-index.c:948
+#: builtin/add.c:283 builtin/update-index.c:952
msgid "override the executable bit of the listed files"
msgstr "覆盖列表里文件的可执行位"
msgid "Maybe you wanted to say 'git add .'?\n"
msgstr "也许您想要执行 'git add .'？\n"
-#: builtin/add.c:380 builtin/check-ignore.c:172 builtin/checkout.c:279
-#: builtin/checkout.c:472 builtin/clean.c:914 builtin/commit.c:350
-#: builtin/mv.c:131 builtin/reset.c:235 builtin/rm.c:298
+#: builtin/add.c:380 builtin/check-ignore.c:172 builtin/checkout.c:298
+#: builtin/checkout.c:491 builtin/clean.c:920 builtin/commit.c:350
+#: builtin/mv.c:143 builtin/reset.c:235 builtin/rm.c:271
#: builtin/submodule--helper.c:244
msgid "index file corrupt"
msgstr "索引文件损坏"
-#: builtin/am.c:414
+#: builtin/am.c:412
msgid "could not parse author script"
msgstr "不能解析作者脚本"
-#: builtin/am.c:491
+#: builtin/am.c:489
#, c-format
msgid "'%s' was deleted by the applypatch-msg hook"
msgstr "'%s' 被 applypatch-msg 钩子删除"
-#: builtin/am.c:532
+#: builtin/am.c:530
#, c-format
msgid "Malformed input line: '%s'."
msgstr "非法的输入行：'%s'。"
-#: builtin/am.c:569
+#: builtin/am.c:567
#, c-format
msgid "Failed to copy notes from '%s' to '%s'"
msgstr "从 '%s' 拷贝注解到 '%s' 时失败"
-#: builtin/am.c:595
+#: builtin/am.c:593
msgid "fseek failed"
msgstr "fseek 失败"
-#: builtin/am.c:775
+#: builtin/am.c:777
#, c-format
msgid "could not parse patch '%s'"
msgstr "无法解析补丁 '%s'"
-#: builtin/am.c:840
+#: builtin/am.c:842
msgid "Only one StGIT patch series can be applied at once"
msgstr "一次只能有一个 StGIT 补丁队列被应用"
-#: builtin/am.c:887
+#: builtin/am.c:889
msgid "invalid timestamp"
msgstr "无效的时间戳"
-#: builtin/am.c:890 builtin/am.c:898
+#: builtin/am.c:892 builtin/am.c:900
msgid "invalid Date line"
msgstr "无效的日期行"
-#: builtin/am.c:895
+#: builtin/am.c:897
msgid "invalid timezone offset"
msgstr "无效的时区偏移值"
-#: builtin/am.c:984
+#: builtin/am.c:986
msgid "Patch format detection failed."
-msgstr "è¡¥ä¸\81æ ¼å¼\8fæ£\80测失败。"
+msgstr "è¡¥ä¸\81æ ¼å¼\8fæ\8e¢测失败。"
-#: builtin/am.c:989 builtin/clone.c:379
+#: builtin/am.c:991 builtin/clone.c:397
#, c-format
msgid "failed to create directory '%s'"
msgstr "无法创建目录 '%s'"
-#: builtin/am.c:993
+#: builtin/am.c:995
msgid "Failed to split patches."
msgstr "无法拆分补丁。"
-#: builtin/am.c:1125 builtin/commit.c:376
+#: builtin/am.c:1127 builtin/commit.c:376
msgid "unable to write index file"
msgstr "无法写入索引文件"
-#: builtin/am.c:1176
+#: builtin/am.c:1178
#, c-format
msgid "When you have resolved this problem, run \"%s --continue\"."
msgstr "当您解决这一问题，执行 \"%s --continue\"。"
-#: builtin/am.c:1177
+#: builtin/am.c:1179
#, c-format
msgid "If you prefer to skip this patch, run \"%s --skip\" instead."
msgstr "如果您想要跳过这一补丁，则执行 \"%s --skip\"。"
-#: builtin/am.c:1178
+#: builtin/am.c:1180
#, c-format
msgid "To restore the original branch and stop patching, run \"%s --abort\"."
msgstr "若要复原至原始分支并停止补丁操作，执行 \"%s --abort\"。"
-#: builtin/am.c:1316
+#: builtin/am.c:1315
msgid "Patch is empty. Was it split wrong?"
msgstr "补丁为空。是不是切分错误？"
-#: builtin/am.c:1390 builtin/log.c:1550
+#: builtin/am.c:1386 builtin/log.c:1557
#, c-format
msgid "invalid ident line: %s"
msgstr "包含无效的身份标识：%s"
-#: builtin/am.c:1417
+#: builtin/am.c:1413
#, c-format
msgid "unable to parse commit %s"
msgstr "不能解析提交 %s"
-#: builtin/am.c:1610
+#: builtin/am.c:1606
msgid "Repository lacks necessary blobs to fall back on 3-way merge."
msgstr "仓库缺乏必要的数据对象以进行三方合并。"
-#: builtin/am.c:1612
+#: builtin/am.c:1608
msgid "Using index info to reconstruct a base tree..."
msgstr "使用索引来重建一个（三方合并的）基础目录树..."
-#: builtin/am.c:1631
+#: builtin/am.c:1627
msgid ""
"Did you hand edit your patch?\n"
"It does not apply to blobs recorded in its index."
"您是否曾手动编辑过您的补丁？\n"
"无法应用补丁到索引中的数据对象上。"
-#: builtin/am.c:1637
+#: builtin/am.c:1633
msgid "Falling back to patching base and 3-way merge..."
msgstr "回落到基础版本上打补丁及进行三方合并..."
-#: builtin/am.c:1662
+#: builtin/am.c:1658
msgid "Failed to merge in the changes."
msgstr "无法合并变更。"
-#: builtin/am.c:1686 builtin/merge.c:628
+#: builtin/am.c:1682 builtin/merge.c:631
msgid "git write-tree failed to write a tree"
msgstr "git write-tree 无法写入一树对象"
-#: builtin/am.c:1693
+#: builtin/am.c:1689
msgid "applying to an empty history"
msgstr "正应用到一个空历史上"
-#: builtin/am.c:1706 builtin/commit.c:1769 builtin/merge.c:798
-#: builtin/merge.c:823
+#: builtin/am.c:1702 builtin/commit.c:1764 builtin/merge.c:802
+#: builtin/merge.c:827
msgid "failed to write commit object"
msgstr "无法写提交对象"
-#: builtin/am.c:1739 builtin/am.c:1743
+#: builtin/am.c:1735 builtin/am.c:1739
#, c-format
msgid "cannot resume: %s does not exist."
msgstr "无法继续：%s 不存在。"
-#: builtin/am.c:1759
+#: builtin/am.c:1755
msgid "cannot be interactive without stdin connected to a terminal."
msgstr "标准输入没有和终端关联，不能进行交互式操作。"
-#: builtin/am.c:1764
+#: builtin/am.c:1760
msgid "Commit Body is:"
msgstr "提交内容为："
#. in your translation. The program will only accept English
#. input at this point.
#.
-#: builtin/am.c:1774
+#: builtin/am.c:1770
msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all: "
msgstr "应用？是[y]/否[n]/编辑[e]/查看补丁[v]/应用所有[a]："
-#: builtin/am.c:1824
+#: builtin/am.c:1820
#, c-format
msgid "Dirty index: cannot apply patches (dirty: %s)"
msgstr "脏索引：不能应用补丁（脏文件：%s）"
-#: builtin/am.c:1861 builtin/am.c:1933
+#: builtin/am.c:1860 builtin/am.c:1932
#, c-format
msgid "Applying: %.*s"
msgstr "应用：%.*s"
-#: builtin/am.c:1877
+#: builtin/am.c:1876
msgid "No changes -- Patch already applied."
msgstr "没有变更 —— 补丁已经应用过。"
-#: builtin/am.c:1885
+#: builtin/am.c:1884
#, c-format
msgid "Patch failed at %s %.*s"
msgstr "打补丁失败于 %s %.*s"
-#: builtin/am.c:1891
+#: builtin/am.c:1890
#, c-format
msgid "The copy of the patch that failed is found in: %s"
msgstr "失败的补丁文件副本位于：%s"
-#: builtin/am.c:1936
+#: builtin/am.c:1935
msgid ""
"No changes - did you forget to use 'git add'?\n"
"If there is nothing left to stage, chances are that something else\n"
"如果没有什么要添加到暂存区的，则很可能是其它提交已经引入了相同的变更。\n"
"您也许想要跳过这个补丁。"
-#: builtin/am.c:1943
+#: builtin/am.c:1942
msgid ""
"You still have unmerged paths in your index.\n"
"Did you forget to use 'git add'?"
"您的索引中仍有未合并的路径。\n"
"您是否忘了执行 'git add'？"
-#: builtin/am.c:2051 builtin/am.c:2055 builtin/am.c:2067 builtin/reset.c:308
+#: builtin/am.c:2050 builtin/am.c:2054 builtin/am.c:2066 builtin/reset.c:308
#: builtin/reset.c:316
#, c-format
msgid "Could not parse object '%s'."
msgstr "不能解析对象 '%s'。"
-#: builtin/am.c:2103
+#: builtin/am.c:2102
msgid "failed to clean index"
msgstr "无法清空索引"
-#: builtin/am.c:2137
+#: builtin/am.c:2136
msgid ""
"You seem to have moved HEAD since the last 'am' failure.\n"
"Not rewinding to ORIG_HEAD"
msgstr "您好像在上一次 'am' 失败后移动了 HEAD。未回退至 ORIG_HEAD"
-#: builtin/am.c:2200
+#: builtin/am.c:2199
#, c-format
msgid "Invalid value for --patch-format: %s"
msgstr "无效的 --patch-format 值：%s"
-#: builtin/am.c:2233
+#: builtin/am.c:2232
msgid "git am [<options>] [(<mbox> | <Maildir>)...]"
msgstr "git am [<选项>] [(<mbox> | <Maildir>)...]"
-#: builtin/am.c:2234
+#: builtin/am.c:2233
msgid "git am [<options>] (--continue | --skip | --abort)"
msgstr "git am [<选项>] (--continue | --skip | --abort)"
-#: builtin/am.c:2240
+#: builtin/am.c:2239
msgid "run interactively"
msgstr "以交互式方式运行"
-#: builtin/am.c:2242
+#: builtin/am.c:2241
msgid "historical option -- no-op"
msgstr "老的参数 —— 无作用"
-#: builtin/am.c:2244
+#: builtin/am.c:2243
msgid "allow fall back on 3way merging if needed"
msgstr "如果必要，允许使用三方合并。"
-#: builtin/am.c:2245 builtin/init-db.c:483 builtin/prune-packed.c:57
-#: builtin/repack.c:172
+#: builtin/am.c:2244 builtin/init-db.c:483 builtin/prune-packed.c:57
+#: builtin/repack.c:178
msgid "be quiet"
msgstr "静默模式"
-#: builtin/am.c:2247
+#: builtin/am.c:2246
msgid "add a Signed-off-by line to the commit message"
msgstr "在提交说明中添加一个 Signed-off-by 签名"
-#: builtin/am.c:2250
+#: builtin/am.c:2249
msgid "recode into utf8 (default)"
msgstr "使用 utf8 字符集（默认）"
-#: builtin/am.c:2252
+#: builtin/am.c:2251
msgid "pass -k flag to git-mailinfo"
msgstr "向 git-mailinfo 传递 -k 参数"
-#: builtin/am.c:2254
+#: builtin/am.c:2253
msgid "pass -b flag to git-mailinfo"
msgstr "向 git-mailinfo 传递 -b 参数"
-#: builtin/am.c:2256
+#: builtin/am.c:2255
msgid "pass -m flag to git-mailinfo"
msgstr "向 git-mailinfo 传递 -m 参数"
-#: builtin/am.c:2258
+#: builtin/am.c:2257
msgid "pass --keep-cr flag to git-mailsplit for mbox format"
msgstr "针对 mbox 格式，向 git-mailsplit 传递 --keep-cr 参数"
-#: builtin/am.c:2261
+#: builtin/am.c:2260
msgid "do not pass --keep-cr flag to git-mailsplit independent of am.keepcr"
msgstr "不向 git-mailsplit 传递 --keep-cr 参数，覆盖 am.keepcr 的设置"
-#: builtin/am.c:2264
+#: builtin/am.c:2263
msgid "strip everything before a scissors line"
msgstr "丢弃裁切线前的所有内容"
-#: builtin/am.c:2266 builtin/am.c:2269 builtin/am.c:2272 builtin/am.c:2275
-#: builtin/am.c:2278 builtin/am.c:2281 builtin/am.c:2284 builtin/am.c:2287
-#: builtin/am.c:2293
+#: builtin/am.c:2265 builtin/am.c:2268 builtin/am.c:2271 builtin/am.c:2274
+#: builtin/am.c:2277 builtin/am.c:2280 builtin/am.c:2283 builtin/am.c:2286
+#: builtin/am.c:2292
msgid "pass it through git-apply"
msgstr "传递给 git-apply"
-#: builtin/am.c:2283 builtin/fmt-merge-msg.c:662 builtin/fmt-merge-msg.c:665
-#: builtin/grep.c:707 builtin/merge.c:200 builtin/pull.c:135
-#: builtin/pull.c:194 builtin/repack.c:181 builtin/repack.c:185
-#: builtin/show-branch.c:644 builtin/show-ref.c:175 builtin/tag.c:340
+#: builtin/am.c:2282 builtin/fmt-merge-msg.c:662 builtin/fmt-merge-msg.c:665
+#: builtin/grep.c:1045 builtin/merge.c:201 builtin/pull.c:135
+#: builtin/pull.c:194 builtin/repack.c:187 builtin/repack.c:191
+#: builtin/show-branch.c:637 builtin/show-ref.c:169 builtin/tag.c:398
#: parse-options.h:132 parse-options.h:134 parse-options.h:245
msgid "n"
msgstr "n"
-#: builtin/am.c:2289 builtin/for-each-ref.c:37 builtin/replace.c:438
-#: builtin/tag.c:372
+#: builtin/am.c:2288 builtin/branch.c:592 builtin/for-each-ref.c:37
+#: builtin/replace.c:443 builtin/tag.c:433 builtin/verify-tag.c:38
msgid "format"
msgstr "格式"
-#: builtin/am.c:2290
+#: builtin/am.c:2289
msgid "format the patch(es) are in"
msgstr "补丁的格式"
-#: builtin/am.c:2296
+#: builtin/am.c:2295
msgid "override error message when patch failure occurs"
msgstr "打补丁失败时显示的错误信息"
-#: builtin/am.c:2298
+#: builtin/am.c:2297
msgid "continue applying patches after resolving a conflict"
msgstr "冲突解决后继续应用补丁"
-#: builtin/am.c:2301
+#: builtin/am.c:2300
msgid "synonyms for --continue"
msgstr "和 --continue 同义"
-#: builtin/am.c:2304
+#: builtin/am.c:2303
msgid "skip the current patch"
msgstr "跳过当前补丁"
-#: builtin/am.c:2307
+#: builtin/am.c:2306
msgid "restore the original branch and abort the patching operation."
msgstr "恢复原始分支并终止打补丁操作。"
-#: builtin/am.c:2311
+#: builtin/am.c:2310
msgid "lie about committer date"
msgstr "将作者日期作为提交日期"
-#: builtin/am.c:2313
+#: builtin/am.c:2312
msgid "use current timestamp for author date"
msgstr "用当前时间作为作者日期"
-#: builtin/am.c:2315 builtin/commit.c:1605 builtin/merge.c:229
-#: builtin/pull.c:165 builtin/revert.c:92 builtin/tag.c:355
+#: builtin/am.c:2314 builtin/commit.c:1600 builtin/merge.c:232
+#: builtin/pull.c:165 builtin/revert.c:111 builtin/tag.c:413
msgid "key-id"
msgstr "key-id"
-#: builtin/am.c:2316
+#: builtin/am.c:2315
msgid "GPG-sign commits"
msgstr "使用 GPG 签名提交"
-#: builtin/am.c:2319
+#: builtin/am.c:2318
msgid "(internal use for git-rebase)"
msgstr "（内部使用，用于 git-rebase）"
-#: builtin/am.c:2334
+#: builtin/am.c:2333
msgid ""
"The -b/--binary option has been a no-op for long time, and\n"
"it will be removed. Please do not use it anymore."
"参数 -b/--binary 已经很长时间不做任何实质操作了，并且将被移除。\n"
"请不要再使用它了。"
-#: builtin/am.c:2341
+#: builtin/am.c:2340
msgid "failed to read the index"
msgstr "无法读取索引"
-#: builtin/am.c:2356
+#: builtin/am.c:2355
#, c-format
msgid "previous rebase directory %s still exists but mbox given."
msgstr "之前的变基目录 %s 仍然存在，但却提供了 mbox。"
-#: builtin/am.c:2380
+#: builtin/am.c:2379
#, c-format
msgid ""
"Stray %s directory found.\n"
"发现了错误的 %s 目录。\n"
"使用 \"git am --abort\" 删除它。"
-#: builtin/am.c:2386
+#: builtin/am.c:2385
msgid "Resolve operation not in progress, we are not resuming."
msgstr "解决操作未进行，我们不会继续。"
msgid "git archive: NACK %s"
msgstr "git archive：NACK %s"
-#: builtin/archive.c:63
-#, c-format
-msgid "remote error: %s"
-msgstr "远程错误：%s"
-
#: builtin/archive.c:64
msgid "git archive: protocol error"
msgstr "git archive：协议错误"
msgid "<rev-opts> are documented in git-rev-list(1)"
msgstr "<版本选项> 的文档记录在 git-rev-list(1) 中"
-#: builtin/blame.c:1781
+#: builtin/blame.c:1777
msgid "Blaming lines"
msgstr "追踪代码行"
-#: builtin/blame.c:2577
+#: builtin/blame.c:2573
msgid "Show blame entries as we find them, incrementally"
msgstr "增量式地显示发现的 blame 条目"
-#: builtin/blame.c:2578
+#: builtin/blame.c:2574
msgid "Show blank SHA-1 for boundary commits (Default: off)"
msgstr "边界提交显示空的 SHA-1（默认：关闭）"
-#: builtin/blame.c:2579
+#: builtin/blame.c:2575
msgid "Do not treat root commits as boundaries (Default: off)"
msgstr "不把根提交作为边界（默认：关闭）"
-#: builtin/blame.c:2580
+#: builtin/blame.c:2576
msgid "Show work cost statistics"
msgstr "显示命令消耗统计"
-#: builtin/blame.c:2581
+#: builtin/blame.c:2577
msgid "Force progress reporting"
msgstr "强制进度显示"
-#: builtin/blame.c:2582
+#: builtin/blame.c:2578
msgid "Show output score for blame entries"
msgstr "显示判断 blame 条目位移的得分诊断信息"
-#: builtin/blame.c:2583
+#: builtin/blame.c:2579
msgid "Show original filename (Default: auto)"
msgstr "显示原始文件名（默认：自动）"
-#: builtin/blame.c:2584
+#: builtin/blame.c:2580
msgid "Show original linenumber (Default: off)"
msgstr "显示原始的行号（默认：关闭）"
-#: builtin/blame.c:2585
+#: builtin/blame.c:2581
msgid "Show in a format designed for machine consumption"
msgstr "显示为一个适合机器读取的格式"
-#: builtin/blame.c:2586
+#: builtin/blame.c:2582
msgid "Show porcelain format with per-line commit information"
msgstr "为每一行显示机器适用的提交信息"
-#: builtin/blame.c:2587
+#: builtin/blame.c:2583
msgid "Use the same output mode as git-annotate (Default: off)"
msgstr "使用和 git-annotate 相同的输出模式（默认：关闭）"
-#: builtin/blame.c:2588
+#: builtin/blame.c:2584
msgid "Show raw timestamp (Default: off)"
msgstr "显示原始时间戳（默认：关闭）"
-#: builtin/blame.c:2589
+#: builtin/blame.c:2585
msgid "Show long commit SHA1 (Default: off)"
msgstr "显示长的 SHA1 提交号（默认：关闭）"
-#: builtin/blame.c:2590
+#: builtin/blame.c:2586
msgid "Suppress author name and timestamp (Default: off)"
msgstr "隐藏作者名字和时间戳（默认：关闭）"
-#: builtin/blame.c:2591
+#: builtin/blame.c:2587
msgid "Show author email instead of name (Default: off)"
msgstr "显示作者的邮箱而不是名字（默认：关闭）"
-#: builtin/blame.c:2592
+#: builtin/blame.c:2588
msgid "Ignore whitespace differences"
msgstr "忽略空白差异"
-#: builtin/blame.c:2599
-msgid "Use an experimental indent-based heuristic to improve diffs"
-msgstr "使用一个试验性的基于缩进的启发式算法改进差异显示"
-
-#: builtin/blame.c:2600
-msgid "Use an experimental blank-line-based heuristic to improve diffs"
-msgstr "使用一个试验性的基于空行的启发式算法改进差异显示"
+#: builtin/blame.c:2595
+msgid "Use an experimental heuristic to improve diffs"
+msgstr "使用一个试验性的启发式算法改进差异显示"
-#: builtin/blame.c:2602
+#: builtin/blame.c:2597
msgid "Spend extra cycles to find better match"
msgstr "花费额外的循环来找到更好的匹配"
-#: builtin/blame.c:2603
+#: builtin/blame.c:2598
msgid "Use revisions from <file> instead of calling git-rev-list"
msgstr "使用来自 <文件> 的修订集而不是调用 git-rev-list"
-#: builtin/blame.c:2604
+#: builtin/blame.c:2599
msgid "Use <file>'s contents as the final image"
msgstr "使用 <文件> 的内容作为最终的图片"
-#: builtin/blame.c:2605 builtin/blame.c:2606
+#: builtin/blame.c:2600 builtin/blame.c:2601
msgid "score"
msgstr "得分"
-#: builtin/blame.c:2605
+#: builtin/blame.c:2600
msgid "Find line copies within and across files"
msgstr "找到文件内及跨文件的行拷贝"
-#: builtin/blame.c:2606
+#: builtin/blame.c:2601
msgid "Find line movements within and across files"
msgstr "找到文件内及跨文件的行移动"
-#: builtin/blame.c:2607
+#: builtin/blame.c:2602
msgid "n,m"
msgstr "n,m"
-#: builtin/blame.c:2607
+#: builtin/blame.c:2602
msgid "Process only line range n,m, counting from 1"
msgstr "只处理行范围在 n 和 m 之间的，从 1 开始"
-#: builtin/blame.c:2654
+#: builtin/blame.c:2649
msgid "--progress can't be used with --incremental or porcelain formats"
msgstr "--progress 不能和 --incremental 或 --porcelain 同时使用"
#. takes 22 places, is the longest among various forms of
#. relative timestamps, but your language may need more or
#. fewer display columns.
-#: builtin/blame.c:2700
+#: builtin/blame.c:2697
msgid "4 years, 11 months ago"
msgstr "4 年 11 个月前"
-#: builtin/blame.c:2780
+#: builtin/blame.c:2777
msgid "--contents and --reverse do not blend well."
msgstr "--contents 和 --reverse 不能混用。"
-#: builtin/blame.c:2800
+#: builtin/blame.c:2797
msgid "cannot use --contents with final commit object name"
msgstr "不能将 --contents 和最终的提交对象名共用"
-#: builtin/blame.c:2805
+#: builtin/blame.c:2802
msgid "--reverse and --first-parent together require specified latest commit"
msgstr "--reverse 和 --first-parent 共用，需要指定最新的提交"
-#: builtin/blame.c:2832
+#: builtin/blame.c:2829
msgid ""
"--reverse --first-parent together require range along first-parent chain"
msgstr "--reverse 和 --first-parent 共用，需要第一祖先链上的提交范围"
-#: builtin/blame.c:2843
+#: builtin/blame.c:2840
#, c-format
msgid "no such path %s in %s"
msgstr "在 %2$s 中无此路径 %1$s"
-#: builtin/blame.c:2854
+#: builtin/blame.c:2851
#, c-format
msgid "cannot read blob %s for path %s"
-msgstr "不能为路径 %2$s 读取对象 %1$s"
+msgstr "不能为路径 %2$s 读取数据对象 %1$s"
-#: builtin/blame.c:2873
+#: builtin/blame.c:2870
#, c-format
msgid "file %s has only %lu line"
msgid_plural "file %s has only %lu lines"
msgid "git branch [<options>] [-r | -a] [--points-at]"
msgstr "git branch [<选项>] [-r | -a] [--points-at]"
+#: builtin/branch.c:31
+msgid "git branch [<options>] [-r | -a] [--format]"
+msgstr "git branch [<选项>] [-r | -a] [--format]"
+
# 译者：保持原换行格式，在输出时 %s 的替代内容会让字符串变长
-#: builtin/branch.c:143
+#: builtin/branch.c:144
#, c-format
msgid ""
"deleting branch '%s' that has been merged to\n"
" '%s'，但未合并到 HEAD。"
# 译者：保持原换行格式，在输出时 %s 的替代内容会让字符串变长
-#: builtin/branch.c:147
+#: builtin/branch.c:148
#, c-format
msgid ""
"not deleting branch '%s' that is not yet merged to\n"
"并未删除分支 '%s'， 虽然它已经合并到 HEAD，\n"
" 然而却尚未被合并到分支 '%s' 。"
-#: builtin/branch.c:161
+#: builtin/branch.c:162
#, c-format
msgid "Couldn't look up commit object for '%s'"
msgstr "无法查询 '%s' 指向的提交对象"
-#: builtin/branch.c:165
+#: builtin/branch.c:166
#, c-format
msgid ""
"The branch '%s' is not fully merged.\n"
"分支 '%s' 没有完全合并。\n"
"如果您确认要删除它，执行 'git branch -D %s'。"
-#: builtin/branch.c:178
+#: builtin/branch.c:179
msgid "Update of config-file failed"
msgstr "无法更新 config 文件"
-#: builtin/branch.c:206
+#: builtin/branch.c:210
msgid "cannot use -a with -d"
msgstr "不能将 -a 和 -d 同时使用"
-#: builtin/branch.c:212
+#: builtin/branch.c:216
msgid "Couldn't look up commit object for HEAD"
msgstr "无法查询 HEAD 指向的提交对象"
-#: builtin/branch.c:226
+#: builtin/branch.c:230
#, c-format
msgid "Cannot delete branch '%s' checked out at '%s'"
msgstr "无法删除检出于 '%2$s' 的分支 '%1$s'。"
-#: builtin/branch.c:241
+#: builtin/branch.c:245
#, c-format
msgid "remote-tracking branch '%s' not found."
msgstr "未能找到远程跟踪分支 '%s'。"
-#: builtin/branch.c:242
+#: builtin/branch.c:246
#, c-format
msgid "branch '%s' not found."
msgstr "分支 '%s' 未发现。"
-#: builtin/branch.c:257
+#: builtin/branch.c:261
#, c-format
msgid "Error deleting remote-tracking branch '%s'"
msgstr "无法删除远程跟踪分支 '%s'"
-#: builtin/branch.c:258
+#: builtin/branch.c:262
#, c-format
msgid "Error deleting branch '%s'"
msgstr "无法删除分支 '%s'"
-#: builtin/branch.c:265
+#: builtin/branch.c:269
#, c-format
msgid "Deleted remote-tracking branch %s (was %s).\n"
msgstr "已删除远程跟踪分支 %s（曾为 %s）。\n"
-#: builtin/branch.c:266
+#: builtin/branch.c:270
#, c-format
msgid "Deleted branch %s (was %s).\n"
msgstr "已删除分支 %s（曾为 %s）。\n"
-#: builtin/branch.c:312
-#, c-format
-msgid "[%s: gone]"
-msgstr "[%s: 丢失]"
-
-#: builtin/branch.c:317
-#, c-format
-msgid "[%s]"
-msgstr "[%s]"
-
-#: builtin/branch.c:322
-#, c-format
-msgid "[%s: behind %d]"
-msgstr "[%s：落后 %d]"
-
-#: builtin/branch.c:324
-#, c-format
-msgid "[behind %d]"
-msgstr "[落后 %d]"
-
-#: builtin/branch.c:328
-#, c-format
-msgid "[%s: ahead %d]"
-msgstr "[%s：领先 %d]"
-
-#: builtin/branch.c:330
-#, c-format
-msgid "[ahead %d]"
-msgstr "[领先 %d]"
-
-#: builtin/branch.c:333
-#, c-format
-msgid "[%s: ahead %d, behind %d]"
-msgstr "[%s：领先 %d，落后 %d]"
-
-#: builtin/branch.c:336
-#, c-format
-msgid "[ahead %d, behind %d]"
-msgstr "[领先 %d，落后 %d]"
-
-#: builtin/branch.c:349
-msgid " **** invalid ref ****"
-msgstr " **** 无效引用 ****"
-
-#: builtin/branch.c:375
-#, c-format
-msgid "(no branch, rebasing %s)"
-msgstr "（非分支，正变基 %s）"
-
-#: builtin/branch.c:378
-#, c-format
-msgid "(no branch, bisect started on %s)"
-msgstr "（非分支，二分查找开始于 %s）"
-
-#. TRANSLATORS: make sure this matches
-#. "HEAD detached at " in wt-status.c
-#: builtin/branch.c:384
-#, c-format
-msgid "(HEAD detached at %s)"
-msgstr "（头指针分离于 %s）"
-
-#. TRANSLATORS: make sure this matches
-#. "HEAD detached from " in wt-status.c
-#: builtin/branch.c:389
-#, c-format
-msgid "(HEAD detached from %s)"
-msgstr "（头指针分离自 %s）"
-
-#: builtin/branch.c:393
-msgid "(no branch)"
-msgstr "（非分支）"
-
-#: builtin/branch.c:544
+#: builtin/branch.c:441
#, c-format
msgid "Branch %s is being rebased at %s"
msgstr "分支 %s 正被变基到 %s"
-#: builtin/branch.c:548
+#: builtin/branch.c:445
#, c-format
msgid "Branch %s is being bisected at %s"
msgstr "分支 %s 正被二分查找于 %s"
-#: builtin/branch.c:563
+#: builtin/branch.c:460
msgid "cannot rename the current branch while not on any."
msgstr "无法重命名当前分支因为不处于任何分支上。"
-#: builtin/branch.c:573
+#: builtin/branch.c:470
#, c-format
msgid "Invalid branch name: '%s'"
msgstr "无效的分支名：'%s'"
-#: builtin/branch.c:590
+#: builtin/branch.c:487
msgid "Branch rename failed"
msgstr "分支重命名失败"
-#: builtin/branch.c:594
+#: builtin/branch.c:490
#, c-format
msgid "Renamed a misnamed branch '%s' away"
msgstr "重命名掉一个错误命名的旧分支 '%s'"
-#: builtin/branch.c:597
+#: builtin/branch.c:493
#, c-format
msgid "Branch renamed to %s, but HEAD is not updated!"
msgstr "分支重命名为 %s，但 HEAD 没有更新！"
-#: builtin/branch.c:604
+#: builtin/branch.c:502
msgid "Branch is renamed, but update of config-file failed"
msgstr "分支被重命名，但更新 config 文件失败"
-#: builtin/branch.c:620
+#: builtin/branch.c:518
#, c-format
msgid ""
"Please edit the description for the branch\n"
" %s\n"
"以 '%c' 开头的行将被过滤。\n"
-#: builtin/branch.c:651
+#: builtin/branch.c:551
msgid "Generic options"
msgstr "通用选项"
-#: builtin/branch.c:653
+#: builtin/branch.c:553
msgid "show hash and subject, give twice for upstream branch"
msgstr "显示哈希值和主题，若参数出现两次则显示上游分支"
-#: builtin/branch.c:654
+#: builtin/branch.c:554
msgid "suppress informational messages"
msgstr "不显示信息"
-#: builtin/branch.c:655
+#: builtin/branch.c:555
msgid "set up tracking mode (see git-pull(1))"
msgstr "设置跟踪模式（参见 git-pull(1)）"
-#: builtin/branch.c:657
+#: builtin/branch.c:557
msgid "change upstream info"
msgstr "改变上游信息"
-#: builtin/branch.c:659
+#: builtin/branch.c:559
msgid "upstream"
msgstr "上游"
-#: builtin/branch.c:659
+#: builtin/branch.c:559
msgid "change the upstream info"
msgstr "改变上游信息"
-#: builtin/branch.c:660
+#: builtin/branch.c:560
msgid "Unset the upstream info"
msgstr "取消上游信息的设置"
-#: builtin/branch.c:661
+#: builtin/branch.c:561
msgid "use colored output"
msgstr "使用彩色输出"
-#: builtin/branch.c:662
+#: builtin/branch.c:562
msgid "act on remote-tracking branches"
msgstr "作用于远程跟踪分支"
-#: builtin/branch.c:664 builtin/branch.c:665
+#: builtin/branch.c:564 builtin/branch.c:566
msgid "print only branches that contain the commit"
msgstr "只打印包含该提交的分支"
-#: builtin/branch.c:668
+#: builtin/branch.c:565 builtin/branch.c:567
+msgid "print only branches that don't contain the commit"
+msgstr "只打印不包含该提交的分支"
+
+#: builtin/branch.c:570
msgid "Specific git-branch actions:"
msgstr "具体的 git-branch 动作："
-#: builtin/branch.c:669
+#: builtin/branch.c:571
msgid "list both remote-tracking and local branches"
msgstr "列出远程跟踪及本地分支"
-#: builtin/branch.c:671
+#: builtin/branch.c:573
msgid "delete fully merged branch"
msgstr "删除完全合并的分支"
-#: builtin/branch.c:672
+#: builtin/branch.c:574
msgid "delete branch (even if not merged)"
msgstr "删除分支（即使没有合并）"
-#: builtin/branch.c:673
+#: builtin/branch.c:575
msgid "move/rename a branch and its reflog"
msgstr "移动/重命名一个分支，以及它的引用日志"
-#: builtin/branch.c:674
+#: builtin/branch.c:576
msgid "move/rename a branch, even if target exists"
msgstr "移动/重命名一个分支，即使目标已存在"
-#: builtin/branch.c:675
+#: builtin/branch.c:577
msgid "list branch names"
msgstr "列出分支名"
-#: builtin/branch.c:676
+#: builtin/branch.c:578
msgid "create the branch's reflog"
msgstr "创建分支的引用日志"
-#: builtin/branch.c:678
+#: builtin/branch.c:580
msgid "edit the description for the branch"
msgstr "标记分支的描述"
-#: builtin/branch.c:679
+#: builtin/branch.c:581
msgid "force creation, move/rename, deletion"
msgstr "强制创建、移动/重命名、删除"
-#: builtin/branch.c:680
+#: builtin/branch.c:582
msgid "print only branches that are merged"
msgstr "只打印已经合并的分支"
-#: builtin/branch.c:681
+#: builtin/branch.c:583
msgid "print only branches that are not merged"
msgstr "只打印尚未合并的分支"
-#: builtin/branch.c:682
+#: builtin/branch.c:584
msgid "list branches in columns"
msgstr "以列的方式显示分支"
-#: builtin/branch.c:683 builtin/for-each-ref.c:38 builtin/tag.c:366
+#: builtin/branch.c:585 builtin/for-each-ref.c:38 builtin/tag.c:426
msgid "key"
msgstr "key"
-#: builtin/branch.c:684 builtin/for-each-ref.c:39 builtin/tag.c:367
+#: builtin/branch.c:586 builtin/for-each-ref.c:39 builtin/tag.c:427
msgid "field name to sort on"
msgstr "排序的字段名"
-#: builtin/branch.c:686 builtin/for-each-ref.c:41 builtin/notes.c:404
+#: builtin/branch.c:588 builtin/for-each-ref.c:41 builtin/notes.c:404
#: builtin/notes.c:407 builtin/notes.c:567 builtin/notes.c:570
-#: builtin/tag.c:369
+#: builtin/tag.c:429
msgid "object"
msgstr "对象"
-#: builtin/branch.c:687
+#: builtin/branch.c:589
msgid "print only branches of the object"
msgstr "只打印指向该对象的分支"
-#: builtin/branch.c:705
+#: builtin/branch.c:591 builtin/for-each-ref.c:47 builtin/tag.c:434
+msgid "sorting and filtering are case insensitive"
+msgstr "排序和过滤属于大小写不敏感"
+
+#: builtin/branch.c:592 builtin/for-each-ref.c:37 builtin/tag.c:433
+#: builtin/verify-tag.c:38
+msgid "format to use for the output"
+msgstr "输出格式"
+
+#: builtin/branch.c:611
msgid "Failed to resolve HEAD as a valid ref."
msgstr "无法将 HEAD 解析为有效引用。"
-#: builtin/branch.c:709 builtin/clone.c:706
+#: builtin/branch.c:615 builtin/clone.c:724
msgid "HEAD not found below refs/heads!"
msgstr "HEAD 没有位于 /refs/heads 之下！"
-#: builtin/branch.c:729
+#: builtin/branch.c:638
msgid "--column and --verbose are incompatible"
msgstr "--column 和 --verbose 不兼容"
-#: builtin/branch.c:740 builtin/branch.c:782
+#: builtin/branch.c:649 builtin/branch.c:701
msgid "branch name required"
msgstr "必须提供分支名"
-#: builtin/branch.c:758
+#: builtin/branch.c:677
msgid "Cannot give description to detached HEAD"
msgstr "不能向分离头指针提供描述"
-#: builtin/branch.c:763
+#: builtin/branch.c:682
msgid "cannot edit description of more than one branch"
msgstr "不能为一个以上的分支编辑描述"
-#: builtin/branch.c:770
+#: builtin/branch.c:689
#, c-format
msgid "No commit on branch '%s' yet."
msgstr "分支 '%s' 尚无提交。"
-#: builtin/branch.c:773
+#: builtin/branch.c:692
#, c-format
msgid "No branch named '%s'."
msgstr "没有分支 '%s'。"
-#: builtin/branch.c:788
+#: builtin/branch.c:707
msgid "too many branches for a rename operation"
msgstr "为重命名操作提供了太多的分支名"
-#: builtin/branch.c:793
+#: builtin/branch.c:712
msgid "too many branches to set new upstream"
msgstr "为设置新上游提供了太多的分支名"
-#: builtin/branch.c:797
+#: builtin/branch.c:716
#, c-format
msgid ""
"could not set upstream of HEAD to %s when it does not point to any branch."
msgstr "无法设置 HEAD 的上游为 %s，因为 HEAD 没有指向任何分支。"
-#: builtin/branch.c:800 builtin/branch.c:822 builtin/branch.c:843
+#: builtin/branch.c:719 builtin/branch.c:741 builtin/branch.c:762
#, c-format
msgid "no such branch '%s'"
msgstr "没有此分支 '%s'"
-#: builtin/branch.c:804
+#: builtin/branch.c:723
#, c-format
msgid "branch '%s' does not exist"
msgstr "分支 '%s' 不存在"
-#: builtin/branch.c:816
+#: builtin/branch.c:735
msgid "too many branches to unset upstream"
msgstr "为取消上游设置操作提供了太多的分支名"
-#: builtin/branch.c:820
+#: builtin/branch.c:739
msgid "could not unset upstream of HEAD when it does not point to any branch."
msgstr "无法取消 HEAD 的上游设置因为它没有指向一个分支"
-#: builtin/branch.c:826
+#: builtin/branch.c:745
#, c-format
msgid "Branch '%s' has no upstream information"
msgstr "分支 '%s' 没有上游信息"
-#: builtin/branch.c:840
+#: builtin/branch.c:759
msgid "it does not make sense to create 'HEAD' manually"
msgstr "手工创建 'HEAD' 没有意义"
-#: builtin/branch.c:846
+#: builtin/branch.c:765
msgid "-a and -r options to 'git branch' do not make sense with a branch name"
msgstr "'git branch' 的 -a 和 -r 选项带一个分支名参数没有意义"
-#: builtin/branch.c:849
+#: builtin/branch.c:768
#, c-format
msgid ""
"The --set-upstream flag is deprecated and will be removed. Consider using --"
msgstr ""
"选项 --set-upstream 已弃用并将被移除。考虑使用 --track 或 --set-upstream-to\n"
-#: builtin/branch.c:866
+#: builtin/branch.c:785
#, c-format
msgid ""
"\n"
"如果你想用 '%s' 跟踪 '%s', 这么做：\n"
"\n"
-#: builtin/bundle.c:51
+#: builtin/bundle.c:45
#, c-format
msgid "%s is okay\n"
msgstr "%s 可以\n"
-#: builtin/bundle.c:64
+#: builtin/bundle.c:58
msgid "Need a repository to create a bundle."
msgstr "需要一个仓库来创建包。"
-#: builtin/bundle.c:68
+#: builtin/bundle.c:62
msgid "Need a repository to unbundle."
msgstr "需要一个仓库来解包。"
msgid "for blob objects, run filters on object's content"
msgstr "对于数据对象，对其内容做过滤"
-#: builtin/cat-file.c:561 git-submodule.sh:923
+#: builtin/cat-file.c:561 git-submodule.sh:943
msgid "blob"
msgstr "数据对象"
msgid "terminate input and output records by a NUL character"
msgstr "输入和输出的记录使用 NUL 字符终结"
-#: builtin/check-ignore.c:18 builtin/checkout.c:1137 builtin/gc.c:325
+#: builtin/check-ignore.c:18 builtin/checkout.c:1158 builtin/gc.c:356
msgid "suppress progress reporting"
msgstr "不显示进度报告"
msgstr "将内容写入临时文件"
#: builtin/checkout-index.c:174 builtin/column.c:30
-#: builtin/submodule--helper.c:595 builtin/submodule--helper.c:598
-#: builtin/submodule--helper.c:604 builtin/submodule--helper.c:951
-#: builtin/worktree.c:469
+#: builtin/submodule--helper.c:635 builtin/submodule--helper.c:638
+#: builtin/submodule--helper.c:644 builtin/submodule--helper.c:980
+#: builtin/worktree.c:477
msgid "string"
msgstr "字符串"
msgid "copy out the files from named stage"
msgstr "从指定暂存区中拷出文件"
-#: builtin/checkout.c:25
+#: builtin/checkout.c:27
msgid "git checkout [<options>] <branch>"
msgstr "git checkout [<选项>] <分支>"
-#: builtin/checkout.c:26
+#: builtin/checkout.c:28
msgid "git checkout [<options>] [<branch>] -- <file>..."
msgstr "git checkout [<选项>] [<分支>] -- <文件>..."
-#: builtin/checkout.c:134 builtin/checkout.c:167
+#: builtin/checkout.c:153 builtin/checkout.c:186
#, c-format
msgid "path '%s' does not have our version"
msgstr "路径 '%s' 没有我们的版本"
-#: builtin/checkout.c:136 builtin/checkout.c:169
+#: builtin/checkout.c:155 builtin/checkout.c:188
#, c-format
msgid "path '%s' does not have their version"
msgstr "路径 '%s' 没有他们的版本"
-#: builtin/checkout.c:152
+#: builtin/checkout.c:171
#, c-format
msgid "path '%s' does not have all necessary versions"
msgstr "路径 '%s' 没有全部必须的版本"
-#: builtin/checkout.c:196
+#: builtin/checkout.c:215
#, c-format
msgid "path '%s' does not have necessary versions"
msgstr "路径 '%s' 没有必须的版本"
-#: builtin/checkout.c:213
+#: builtin/checkout.c:232
#, c-format
msgid "path '%s': cannot merge"
msgstr "path '%s'：无法合并"
-#: builtin/checkout.c:230
+#: builtin/checkout.c:249
#, c-format
msgid "Unable to add merge result for '%s'"
msgstr "无法为 '%s' 添加合并结果"
-#: builtin/checkout.c:250 builtin/checkout.c:253 builtin/checkout.c:256
-#: builtin/checkout.c:259
+#: builtin/checkout.c:269 builtin/checkout.c:272 builtin/checkout.c:275
+#: builtin/checkout.c:278
#, c-format
msgid "'%s' cannot be used with updating paths"
msgstr "'%s' 不能在更新路径时使用"
-#: builtin/checkout.c:262 builtin/checkout.c:265
+#: builtin/checkout.c:281 builtin/checkout.c:284
#, c-format
msgid "'%s' cannot be used with %s"
msgstr "'%s' 不能和 %s 同时使用"
-#: builtin/checkout.c:268
+#: builtin/checkout.c:287
#, c-format
msgid "Cannot update paths and switch to branch '%s' at the same time."
msgstr "不能同时更新路径并切换到分支'%s'。"
-#: builtin/checkout.c:339 builtin/checkout.c:346
+#: builtin/checkout.c:358 builtin/checkout.c:365
#, c-format
msgid "path '%s' is unmerged"
msgstr "路径 '%s' 未合并"
-#: builtin/checkout.c:494
+#: builtin/checkout.c:513
msgid "you need to resolve your current index first"
msgstr "您需要先解决当前索引的冲突"
-#: builtin/checkout.c:624
+#: builtin/checkout.c:644
#, c-format
msgid "Can not do reflog for '%s': %s\n"
msgstr "不能对 '%s' 执行 reflog 操作：%s\n"
-#: builtin/checkout.c:663
+#: builtin/checkout.c:685
msgid "HEAD is now at"
msgstr "HEAD 目前位于"
-#: builtin/checkout.c:667 builtin/clone.c:660
+#: builtin/checkout.c:689 builtin/clone.c:678
msgid "unable to update HEAD"
msgstr "不能更新 HEAD"
-#: builtin/checkout.c:671
+#: builtin/checkout.c:693
#, c-format
msgid "Reset branch '%s'\n"
msgstr "重置分支 '%s'\n"
-#: builtin/checkout.c:674
+#: builtin/checkout.c:696
#, c-format
msgid "Already on '%s'\n"
msgstr "已经位于 '%s'\n"
-#: builtin/checkout.c:678
+#: builtin/checkout.c:700
#, c-format
msgid "Switched to and reset branch '%s'\n"
msgstr "切换并重置分支 '%s'\n"
-#: builtin/checkout.c:680 builtin/checkout.c:1069
+#: builtin/checkout.c:702 builtin/checkout.c:1090
#, c-format
msgid "Switched to a new branch '%s'\n"
msgstr "切换到一个新分支 '%s'\n"
-#: builtin/checkout.c:682
+#: builtin/checkout.c:704
#, c-format
msgid "Switched to branch '%s'\n"
msgstr "切换到分支 '%s'\n"
# 译者：注意保持前导空格
-#: builtin/checkout.c:733
+#: builtin/checkout.c:755
#, c-format
msgid " ... and %d more.\n"
msgstr " ... 及其它 %d 个。\n"
-#: builtin/checkout.c:739
+#: builtin/checkout.c:761
#, c-format
msgid ""
"Warning: you are leaving %d commit behind, not connected to\n"
"\n"
"%s\n"
-#: builtin/checkout.c:758
+#: builtin/checkout.c:780
#, c-format
msgid ""
"If you want to keep it by creating a new branch, this may be a good time\n"
" git branch <新分支名> %s\n"
"\n"
-#: builtin/checkout.c:794
+#: builtin/checkout.c:816
msgid "internal error in revision walk"
msgstr "在版本遍历时遇到内部错误"
-#: builtin/checkout.c:798
+#: builtin/checkout.c:820
msgid "Previous HEAD position was"
msgstr "之前的 HEAD 位置是"
-#: builtin/checkout.c:825 builtin/checkout.c:1064
+#: builtin/checkout.c:847 builtin/checkout.c:1085
msgid "You are on a branch yet to be born"
msgstr "您位于一个尚未初始化的分支"
-#: builtin/checkout.c:970
+#: builtin/checkout.c:991
#, c-format
msgid "only one reference expected, %d given."
msgstr "应只有一个引用，却给出了 %d 个"
-#: builtin/checkout.c:1010 builtin/worktree.c:214
+#: builtin/checkout.c:1031 builtin/worktree.c:214
#, c-format
msgid "invalid reference: %s"
msgstr "无效引用：%s"
-#: builtin/checkout.c:1039
+#: builtin/checkout.c:1060
#, c-format
msgid "reference is not a tree: %s"
msgstr "引用不是一个树：%s"
-#: builtin/checkout.c:1078
+#: builtin/checkout.c:1099
msgid "paths cannot be used with switching branches"
msgstr "路径不能和切换分支同时使用"
-#: builtin/checkout.c:1081 builtin/checkout.c:1085
+#: builtin/checkout.c:1102 builtin/checkout.c:1106
#, c-format
msgid "'%s' cannot be used with switching branches"
msgstr "'%s' 不能和切换分支同时使用"
-#: builtin/checkout.c:1089 builtin/checkout.c:1092 builtin/checkout.c:1097
-#: builtin/checkout.c:1100
+#: builtin/checkout.c:1110 builtin/checkout.c:1113 builtin/checkout.c:1118
+#: builtin/checkout.c:1121
#, c-format
msgid "'%s' cannot be used with '%s'"
msgstr "'%s' 不能和 '%s' 同时使用"
-#: builtin/checkout.c:1105
+#: builtin/checkout.c:1126
#, c-format
msgid "Cannot switch branch to a non-commit '%s'"
msgstr "不能切换分支到一个非提交 '%s'"
-#: builtin/checkout.c:1138 builtin/checkout.c:1140 builtin/clone.c:93
-#: builtin/remote.c:165 builtin/remote.c:167 builtin/worktree.c:324
-#: builtin/worktree.c:326
+#: builtin/checkout.c:1159 builtin/checkout.c:1161 builtin/clone.c:111
+#: builtin/remote.c:165 builtin/remote.c:167 builtin/worktree.c:329
+#: builtin/worktree.c:331
msgid "branch"
msgstr "分支"
-#: builtin/checkout.c:1139
+#: builtin/checkout.c:1160
msgid "create and checkout a new branch"
msgstr "创建并检出一个新的分支"
-#: builtin/checkout.c:1141
+#: builtin/checkout.c:1162
msgid "create/reset and checkout a branch"
msgstr "创建/重置并检出一个分支"
-#: builtin/checkout.c:1142
+#: builtin/checkout.c:1163
msgid "create reflog for new branch"
msgstr "为新的分支创建引用日志"
-#: builtin/checkout.c:1143 builtin/worktree.c:328
+#: builtin/checkout.c:1164 builtin/worktree.c:333
msgid "detach HEAD at named commit"
msgstr "HEAD 从指定的提交分离"
-#: builtin/checkout.c:1144
+#: builtin/checkout.c:1165
msgid "set upstream info for new branch"
msgstr "为新的分支设置上游信息"
-#: builtin/checkout.c:1146
+#: builtin/checkout.c:1167
msgid "new-branch"
msgstr "新分支"
-#: builtin/checkout.c:1146
+#: builtin/checkout.c:1167
msgid "new unparented branch"
msgstr "新的没有父提交的分支"
-#: builtin/checkout.c:1147
+#: builtin/checkout.c:1168
msgid "checkout our version for unmerged files"
msgstr "对尚未合并的文件检出我们的版本"
-#: builtin/checkout.c:1149
+#: builtin/checkout.c:1170
msgid "checkout their version for unmerged files"
msgstr "对尚未合并的文件检出他们的版本"
-#: builtin/checkout.c:1151
+#: builtin/checkout.c:1172
msgid "force checkout (throw away local modifications)"
msgstr "强制检出（丢弃本地修改）"
-#: builtin/checkout.c:1152
+#: builtin/checkout.c:1173
msgid "perform a 3-way merge with the new branch"
msgstr "和新的分支执行三方合并"
-#: builtin/checkout.c:1153 builtin/merge.c:231
+#: builtin/checkout.c:1174 builtin/merge.c:234
msgid "update ignored files (default)"
msgstr "更新忽略的文件（默认）"
-#: builtin/checkout.c:1154 builtin/log.c:1466 parse-options.h:251
+#: builtin/checkout.c:1175 builtin/log.c:1473 parse-options.h:251
msgid "style"
msgstr "风格"
-#: builtin/checkout.c:1155
+#: builtin/checkout.c:1176
msgid "conflict style (merge or diff3)"
msgstr "冲突输出风格（merge 或 diff3）"
-#: builtin/checkout.c:1158
+#: builtin/checkout.c:1179
msgid "do not limit pathspecs to sparse entries only"
msgstr "对路径不做稀疏检出的限制"
-#: builtin/checkout.c:1160
+#: builtin/checkout.c:1181
msgid "second guess 'git checkout <no-such-branch>'"
msgstr "二次猜测'git checkout <无此分支>'"
-#: builtin/checkout.c:1162
+#: builtin/checkout.c:1183
msgid "do not check if another worktree is holding the given ref"
msgstr "不检查指定的引用是否被其他工作区所占用"
-#: builtin/checkout.c:1163 builtin/clone.c:63 builtin/fetch.c:119
-#: builtin/merge.c:228 builtin/pull.c:117 builtin/push.c:536
-#: builtin/send-pack.c:168
+#: builtin/checkout.c:1187 builtin/clone.c:78 builtin/fetch.c:119
+#: builtin/merge.c:231 builtin/pull.c:117 builtin/push.c:539
+#: builtin/send-pack.c:172
msgid "force progress reporting"
msgstr "强制显示进度报告"
-#: builtin/checkout.c:1194
+#: builtin/checkout.c:1224
msgid "-b, -B and --orphan are mutually exclusive"
msgstr "-b、-B 和 --orphan 是互斥的"
-#: builtin/checkout.c:1211
+#: builtin/checkout.c:1241
msgid "--track needs a branch name"
msgstr "--track 需要一个分支名"
-#: builtin/checkout.c:1216
+#: builtin/checkout.c:1246
msgid "Missing branch name; try -b"
msgstr "缺少分支名；尝试 -b"
-#: builtin/checkout.c:1252
+#: builtin/checkout.c:1282
msgid "invalid path specification"
msgstr "无效的路径规格"
-#: builtin/checkout.c:1259
+#: builtin/checkout.c:1289
#, c-format
msgid ""
"Cannot update paths and switch to branch '%s' at the same time.\n"
"不能同时更新路径并切换到分支'%s'。\n"
"您是想要检出 '%s' 但其未能解析为提交么？"
-#: builtin/checkout.c:1264
+#: builtin/checkout.c:1294
#, c-format
msgid "git checkout: --detach does not take a path argument '%s'"
msgstr "git checkout：--detach 不能接收路径参数 '%s'"
-#: builtin/checkout.c:1268
+#: builtin/checkout.c:1298
msgid ""
"git checkout: --ours/--theirs, --force and --merge are incompatible when\n"
"checking out of the index."
msgid "failed to remove %s"
msgstr "无法删除 %s"
-#: builtin/clean.c:291
+#: builtin/clean.c:297 git-add--interactive.perl:614
+#, c-format
msgid ""
"Prompt help:\n"
"1 - select a numbered item\n"
"foo - select item based on unique prefix\n"
-" - (empty) select nothing"
+" - (empty) select nothing\n"
msgstr ""
"帮助：\n"
"1 - 通过编号选择一个选项\n"
-"foo - 通过标题选择一个选项\n"
-" - （空）什么也不选择"
+"foo - 通过唯一前缀选择一个选项\n"
+" - （空）什么也不选择\n"
-#: builtin/clean.c:295
+#: builtin/clean.c:301 git-add--interactive.perl:623
+#, c-format
msgid ""
"Prompt help:\n"
"1 - select a single item\n"
"foo - select item based on unique prefix\n"
"-... - unselect specified items\n"
"* - choose all items\n"
-" - (empty) finish selecting"
+" - (empty) finish selecting\n"
msgstr ""
"帮助：\n"
"1 - 选择一个选项\n"
"3-5 - 选择一个范围内的所有选项\n"
"2-3,6-9 - 选择多个范围内的所有选项\n"
-"foo - 通过标题选择一个选项\n"
+"foo - 通过唯一前缀选择一个选项\n"
"-... - 反选特定的选项\n"
"* - 选择所有选项\n"
-" - （空）结束选择"
+" - （空）结束选择\n"
-#: builtin/clean.c:511
-#, c-format
-msgid "Huh (%s)?"
-msgstr "嗯（%s）？"
+#: builtin/clean.c:517 git-add--interactive.perl:589
+#: git-add--interactive.perl:594
+#, c-format, perl-format
+msgid "Huh (%s)?\n"
+msgstr "嗯（%s）？\n"
-#: builtin/clean.c:653
+#: builtin/clean.c:659
#, c-format
msgid "Input ignore patterns>> "
msgstr "输入模版以排除条目>> "
-#: builtin/clean.c:690
+#: builtin/clean.c:696
#, c-format
msgid "WARNING: Cannot find items matched by: %s"
msgstr "警告：无法找到和 %s 匹配的条目"
-#: builtin/clean.c:711
+#: builtin/clean.c:717
msgid "Select items to delete"
msgstr "选择要删除的条目"
#. TRANSLATORS: Make sure to keep [y/N] as is
-#: builtin/clean.c:752
+#: builtin/clean.c:758
#, c-format
msgid "Remove %s [y/N]? "
msgstr "删除 %s [y/N]？"
-#: builtin/clean.c:777
-msgid "Bye."
-msgstr "再见。"
+#: builtin/clean.c:783 git-add--interactive.perl:1660
+#, c-format
+msgid "Bye.\n"
+msgstr "再见。\n"
-#: builtin/clean.c:785
+#: builtin/clean.c:791
msgid ""
"clean - start cleaning\n"
"filter by pattern - exclude items from deletion\n"
"help - 显示本帮助\n"
"? - 显示如何在提示符下选择的帮助"
-#: builtin/clean.c:812
+#: builtin/clean.c:818 git-add--interactive.perl:1736
msgid "*** Commands ***"
msgstr "*** 命令 ***"
-#: builtin/clean.c:813
+#: builtin/clean.c:819 git-add--interactive.perl:1733
msgid "What now"
msgstr "请选择"
-#: builtin/clean.c:821
+#: builtin/clean.c:827
msgid "Would remove the following item:"
msgid_plural "Would remove the following items:"
msgstr[0] "将删除如下条目："
msgstr[1] "将删除如下条目："
-#: builtin/clean.c:838
+#: builtin/clean.c:844
msgid "No more files to clean, exiting."
msgstr "没有要清理的文件，退出。"
-#: builtin/clean.c:869
+#: builtin/clean.c:875
msgid "do not print names of files removed"
msgstr "不打印删除文件的名称"
-#: builtin/clean.c:871
+#: builtin/clean.c:877
msgid "force"
msgstr "强制"
-#: builtin/clean.c:872
+#: builtin/clean.c:878
msgid "interactive cleaning"
msgstr "交互式清除"
-#: builtin/clean.c:874
+#: builtin/clean.c:880
msgid "remove whole directories"
msgstr "删除整个目录"
-#: builtin/clean.c:875 builtin/describe.c:407 builtin/grep.c:725
-#: builtin/ls-files.c:536 builtin/name-rev.c:313 builtin/show-ref.c:182
+#: builtin/clean.c:881 builtin/describe.c:449 builtin/describe.c:451
+#: builtin/grep.c:1063 builtin/ls-files.c:546 builtin/name-rev.c:348
+#: builtin/name-rev.c:350 builtin/show-ref.c:176
msgid "pattern"
msgstr "模式"
-#: builtin/clean.c:876
+#: builtin/clean.c:882
msgid "add <pattern> to ignore rules"
msgstr "添加 <模式> 到忽略规则"
-#: builtin/clean.c:877
+#: builtin/clean.c:883
msgid "remove ignored files, too"
msgstr "也删除忽略的文件"
-#: builtin/clean.c:879
+#: builtin/clean.c:885
msgid "remove only ignored files"
msgstr "只删除忽略的文件"
-#: builtin/clean.c:897
+#: builtin/clean.c:903
msgid "-x and -X cannot be used together"
msgstr "-x 和 -X 不能同时使用"
-#: builtin/clean.c:901
+#: builtin/clean.c:907
msgid ""
"clean.requireForce set to true and neither -i, -n, nor -f given; refusing to "
"clean"
msgstr ""
"clean.requireForce 设置为 true 且未提供 -i、-n 或 -f 选项，拒绝执行清理动作"
-#: builtin/clean.c:904
+#: builtin/clean.c:910
msgid ""
"clean.requireForce defaults to true and neither -i, -n, nor -f given; "
"refusing to clean"
msgid "git clone [<options>] [--] <repo> [<dir>]"
msgstr "git clone [<选项>] [--] <仓库> [<路径>]"
-#: builtin/clone.c:65
+#: builtin/clone.c:80
msgid "don't create a checkout"
msgstr "不创建一个检出"
-#: builtin/clone.c:66 builtin/clone.c:68 builtin/init-db.c:478
+#: builtin/clone.c:81 builtin/clone.c:83 builtin/init-db.c:478
msgid "create a bare repository"
msgstr "创建一个纯仓库"
-#: builtin/clone.c:70
+#: builtin/clone.c:85
msgid "create a mirror repository (implies bare)"
msgstr "创建一个镜像仓库（也是纯仓库）"
-#: builtin/clone.c:72
+#: builtin/clone.c:87
msgid "to clone from a local repository"
msgstr "从本地仓库克隆"
-#: builtin/clone.c:74
+#: builtin/clone.c:89
msgid "don't use local hardlinks, always copy"
msgstr "不使用本地硬链接，始终复制"
-#: builtin/clone.c:76
+#: builtin/clone.c:91
msgid "setup as shared repository"
msgstr "设置为共享仓库"
-#: builtin/clone.c:78 builtin/clone.c:80
+#: builtin/clone.c:93 builtin/clone.c:97
+msgid "pathspec"
+msgstr "路径规格"
+
+#: builtin/clone.c:93 builtin/clone.c:97
msgid "initialize submodules in the clone"
msgstr "在克隆时初始化子模组"
-#: builtin/clone.c:82
+#: builtin/clone.c:100
msgid "number of submodules cloned in parallel"
msgstr "并发克隆的子模组的数量"
-#: builtin/clone.c:83 builtin/init-db.c:475
+#: builtin/clone.c:101 builtin/init-db.c:475
msgid "template-directory"
msgstr "模板目录"
-#: builtin/clone.c:84 builtin/init-db.c:476
+#: builtin/clone.c:102 builtin/init-db.c:476
msgid "directory from which templates will be used"
msgstr "模板目录将被使用"
-#: builtin/clone.c:86 builtin/clone.c:88 builtin/submodule--helper.c:602
-#: builtin/submodule--helper.c:954
+#: builtin/clone.c:104 builtin/clone.c:106 builtin/submodule--helper.c:642
+#: builtin/submodule--helper.c:983
msgid "reference repository"
msgstr "参考仓库"
-#: builtin/clone.c:90
+#: builtin/clone.c:108
msgid "use --reference only while cloning"
msgstr "仅在克隆时参考 --reference 指向的本地仓库"
-#: builtin/clone.c:91 builtin/column.c:26 builtin/merge-file.c:44
+#: builtin/clone.c:109 builtin/column.c:26 builtin/merge-file.c:43
msgid "name"
msgstr "名称"
-#: builtin/clone.c:92
+#: builtin/clone.c:110
msgid "use <name> instead of 'origin' to track upstream"
msgstr "使用 <名称> 而不是 'origin' 去跟踪上游"
-#: builtin/clone.c:94
+#: builtin/clone.c:112
msgid "checkout <branch> instead of the remote's HEAD"
msgstr "检出 <分支> 而不是远程 HEAD"
-#: builtin/clone.c:96
+#: builtin/clone.c:114
msgid "path to git-upload-pack on the remote"
msgstr "远程 git-upload-pack 路径"
-#: builtin/clone.c:97 builtin/fetch.c:120 builtin/grep.c:668
+#: builtin/clone.c:115 builtin/fetch.c:120 builtin/grep.c:1006
#: builtin/pull.c:202
msgid "depth"
msgstr "深度"
-#: builtin/clone.c:98
+#: builtin/clone.c:116
msgid "create a shallow clone of that depth"
msgstr "创建一个指定深度的浅克隆"
-#: builtin/clone.c:99 builtin/fetch.c:122 builtin/pack-objects.c:2848
+#: builtin/clone.c:117 builtin/fetch.c:122 builtin/pack-objects.c:2918
#: parse-options.h:142
msgid "time"
msgstr "时间"
-#: builtin/clone.c:100
+#: builtin/clone.c:118
msgid "create a shallow clone since a specific time"
msgstr "从一个特定时间创建一个浅克隆"
-#: builtin/clone.c:101 builtin/fetch.c:124
+#: builtin/clone.c:119 builtin/fetch.c:124
msgid "revision"
msgstr "版本"
-#: builtin/clone.c:102 builtin/fetch.c:125
-msgid "deepen history of shallow clone by excluding rev"
-msgstr "通过排除版本来深化浅克隆的历史"
+#: builtin/clone.c:120 builtin/fetch.c:125
+msgid "deepen history of shallow clone, excluding rev"
+msgstr "深化浅克隆的历史，除了特定版本"
-#: builtin/clone.c:104
+#: builtin/clone.c:122
msgid "clone only one branch, HEAD or --branch"
msgstr "只克隆一个分支、HEAD 或 --branch"
-#: builtin/clone.c:106
+#: builtin/clone.c:124
msgid "any cloned submodules will be shallow"
msgstr "子模组将以浅下载模式克隆"
-#: builtin/clone.c:107 builtin/init-db.c:484
+#: builtin/clone.c:125 builtin/init-db.c:484
msgid "gitdir"
msgstr "git目录"
-#: builtin/clone.c:108 builtin/init-db.c:485
+#: builtin/clone.c:126 builtin/init-db.c:485
msgid "separate git dir from working tree"
msgstr "git目录和工作区分离"
-#: builtin/clone.c:109
+#: builtin/clone.c:127
msgid "key=value"
msgstr "key=value"
-#: builtin/clone.c:110
+#: builtin/clone.c:128
msgid "set config inside the new repository"
msgstr "在新仓库中设置配置信息"
-#: builtin/clone.c:111 builtin/fetch.c:140 builtin/push.c:547
+#: builtin/clone.c:129 builtin/fetch.c:140 builtin/push.c:550
msgid "use IPv4 addresses only"
msgstr "只使用 IPv4 地址"
-#: builtin/clone.c:113 builtin/fetch.c:142 builtin/push.c:549
+#: builtin/clone.c:131 builtin/fetch.c:142 builtin/push.c:552
msgid "use IPv6 addresses only"
msgstr "只使用 IPv6 地址"
-#: builtin/clone.c:250
+#: builtin/clone.c:268
msgid ""
"No directory name could be guessed.\n"
"Please specify a directory on the command line"
"无法猜到目录名。\n"
"请在命令行指定一个目录"
-#: builtin/clone.c:303
+#: builtin/clone.c:321
#, c-format
msgid "info: Could not add alternate for '%s': %s\n"
msgstr "info: 不能为 '%s' 添加一个备用：%s\n"
-#: builtin/clone.c:375
+#: builtin/clone.c:393
#, c-format
msgid "failed to open '%s'"
msgstr "无法打开 '%s'"
-#: builtin/clone.c:383
+#: builtin/clone.c:401
#, c-format
msgid "%s exists and is not a directory"
msgstr "%s 存在且不是一个目录"
-#: builtin/clone.c:397
+#: builtin/clone.c:415
#, c-format
msgid "failed to stat %s\n"
-msgstr "无法枚举 %s 状态\n"
+msgstr "对 %s 调用 stat 失败\n"
-#: builtin/clone.c:419
+#: builtin/clone.c:437
#, c-format
msgid "failed to create link '%s'"
msgstr "无法创建链接 '%s'"
-#: builtin/clone.c:423
+#: builtin/clone.c:441
#, c-format
msgid "failed to copy file to '%s'"
msgstr "无法拷贝文件至 '%s'"
-#: builtin/clone.c:448
+#: builtin/clone.c:466
#, c-format
msgid "done.\n"
msgstr "完成。\n"
-#: builtin/clone.c:460
+#: builtin/clone.c:478
msgid ""
"Clone succeeded, but checkout failed.\n"
"You can inspect what was checked out with 'git status'\n"
"您可以通过 'git status' 检查哪些已被检出，然后使用命令\n"
"'git checkout -f HEAD' 重试\n"
-#: builtin/clone.c:537
+#: builtin/clone.c:555
#, c-format
msgid "Could not find remote branch %s to clone."
msgstr "不能发现要克隆的远程分支 %s。"
-#: builtin/clone.c:632
+#: builtin/clone.c:650
msgid "remote did not send all necessary objects"
msgstr "远程没有发送所有必须的对象"
-#: builtin/clone.c:648
+#: builtin/clone.c:666
#, c-format
msgid "unable to update %s"
msgstr "不能更新 %s"
-#: builtin/clone.c:697
+#: builtin/clone.c:715
msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n"
msgstr "远程 HEAD 指向一个不存在的引用，无法检出。\n"
-#: builtin/clone.c:728
+#: builtin/clone.c:746
msgid "unable to checkout working tree"
msgstr "不能检出工作区"
-#: builtin/clone.c:768
+#: builtin/clone.c:786
msgid "unable to write parameters to config file"
msgstr "无法将参数写入配置文件"
-#: builtin/clone.c:831
+#: builtin/clone.c:849
msgid "cannot repack to clean up"
msgstr "无法执行 repack 来清理"
-#: builtin/clone.c:833
+#: builtin/clone.c:851
msgid "cannot unlink temporary alternates file"
msgstr "无法删除临时的 alternates 文件"
-#: builtin/clone.c:866 builtin/receive-pack.c:1895
+#: builtin/clone.c:884 builtin/receive-pack.c:1900
msgid "Too many arguments."
msgstr "太多参数。"
-#: builtin/clone.c:870
+#: builtin/clone.c:888
msgid "You must specify a repository to clone."
msgstr "您必须指定一个仓库来克隆。"
-#: builtin/clone.c:883
+#: builtin/clone.c:901
#, c-format
msgid "--bare and --origin %s options are incompatible."
msgstr "--bare 和 --origin %s 选项不兼容。"
-#: builtin/clone.c:886
+#: builtin/clone.c:904
msgid "--bare and --separate-git-dir are incompatible."
msgstr "--bare 和 --separate-git-dir 选项不兼容。"
-#: builtin/clone.c:899
+#: builtin/clone.c:917
#, c-format
msgid "repository '%s' does not exist"
msgstr "仓库 '%s' 不存在"
-#: builtin/clone.c:905 builtin/fetch.c:1338
+#: builtin/clone.c:923 builtin/fetch.c:1337
#, c-format
msgid "depth %s is not a positive number"
msgstr "深度 %s 不是一个正数"
-#: builtin/clone.c:915
+#: builtin/clone.c:933
#, c-format
msgid "destination path '%s' already exists and is not an empty directory."
msgstr "目标路径 '%s' 已经存在，并且不是一个空目录。"
-#: builtin/clone.c:925
+#: builtin/clone.c:943
#, c-format
msgid "working tree '%s' already exists."
msgstr "工作区 '%s' 已经存在。"
-#: builtin/clone.c:940 builtin/clone.c:951 builtin/submodule--helper.c:657
-#: builtin/worktree.c:222 builtin/worktree.c:249
+#: builtin/clone.c:958 builtin/clone.c:969 builtin/difftool.c:252
+#: builtin/worktree.c:221 builtin/worktree.c:251
#, c-format
msgid "could not create leading directories of '%s'"
msgstr "不能为 '%s' 创建先导目录"
-#: builtin/clone.c:943
+#: builtin/clone.c:961
#, c-format
msgid "could not create work tree dir '%s'"
msgstr "不能创建工作区目录 '%s'"
-#: builtin/clone.c:955
+#: builtin/clone.c:973
#, c-format
msgid "Cloning into bare repository '%s'...\n"
msgstr "克隆到纯仓库 '%s'...\n"
-#: builtin/clone.c:957
+#: builtin/clone.c:975
#, c-format
msgid "Cloning into '%s'...\n"
msgstr "正克隆到 '%s'...\n"
-#: builtin/clone.c:963
+#: builtin/clone.c:999
msgid ""
"clone --recursive is not compatible with both --reference and --reference-if-"
"able"
msgstr "clone --recursive 和 --reference 以及 --reference-if-able 不兼容"
-#: builtin/clone.c:1019
+#: builtin/clone.c:1055
msgid "--depth is ignored in local clones; use file:// instead."
msgstr "--depth 在本地克隆时被忽略，请改用 file:// 协议。"
-#: builtin/clone.c:1021
+#: builtin/clone.c:1057
msgid "--shallow-since is ignored in local clones; use file:// instead."
msgstr "--shallow-since 在本地克隆时被忽略，请改用 file:// 协议。"
-#: builtin/clone.c:1023
+#: builtin/clone.c:1059
msgid "--shallow-exclude is ignored in local clones; use file:// instead."
msgstr "--shallow-exclude 在本地克隆时被忽略，请改用 file:// 协议。"
-#: builtin/clone.c:1026
+#: builtin/clone.c:1062
msgid "source repository is shallow, ignoring --local"
msgstr "源仓库是浅克隆，忽略 --local"
-#: builtin/clone.c:1031
+#: builtin/clone.c:1067
msgid "--local is ignored"
msgstr "--local 被忽略"
-#: builtin/clone.c:1035
+#: builtin/clone.c:1071
#, c-format
msgid "Don't know how to clone %s"
msgstr "不知道如何克隆 %s"
-#: builtin/clone.c:1090 builtin/clone.c:1098
+#: builtin/clone.c:1126 builtin/clone.c:1134
#, c-format
msgid "Remote branch %s not found in upstream %s"
msgstr "远程分支 %s 在上游 %s 未发现"
-#: builtin/clone.c:1101
+#: builtin/clone.c:1137
msgid "You appear to have cloned an empty repository."
msgstr "您似乎克隆了一个空仓库。"
msgid "malformed --author parameter"
msgstr "非法的 --author 参数"
-#: builtin/commit.c:611
-#, c-format
-msgid "invalid date format: %s"
-msgstr "无效的日期格式：%s"
-
#: builtin/commit.c:655
msgid ""
"unable to select a comment character that is not used\n"
msgid "could not lookup commit %s"
msgstr "不能查询提交 %s"
-#: builtin/commit.c:704 builtin/shortlog.c:286
+#: builtin/commit.c:704 builtin/shortlog.c:294
#, c-format
msgid "(reading log message from standard input)\n"
msgstr "（正从标准输入中读取日志信息）\n"
msgid "Error building trees"
msgstr "无法创建树对象"
-#: builtin/commit.c:969 builtin/tag.c:266
+#: builtin/commit.c:968 builtin/tag.c:273
#, c-format
msgid "Please supply the message using either -m or -F option.\n"
msgstr "请使用 -m 或 -F 选项提供提交说明。\n"
msgid "--author '%s' is not 'Name <email>' and matches no existing author"
msgstr "--author '%s' 不是 'Name <email>' 格式，且未能在现有作者中找到匹配"
-#: builtin/commit.c:1086 builtin/commit.c:1327
+#: builtin/commit.c:1086 builtin/commit.c:1325
#, c-format
msgid "Invalid untracked files mode '%s'"
msgstr "无效的未追踪文件参数 '%s'"
msgstr "参数 --include/--only 不跟路径没有意义。"
#: builtin/commit.c:1212
-msgid "Clever... amending the last one with dirty index."
-msgstr "聪明... 用脏索引修补最后一个提交。"
-
-#: builtin/commit.c:1214
msgid "Explicit paths specified without -i or -o; assuming --only paths..."
msgstr "指定了明确的路径而没有使用 -i 或 -o 选项，认为是 --only paths..."
-#: builtin/commit.c:1226 builtin/tag.c:474
+#: builtin/commit.c:1224 builtin/tag.c:551
#, c-format
msgid "Invalid cleanup mode %s"
msgstr "无效的清理模式 %s"
-#: builtin/commit.c:1231
+#: builtin/commit.c:1229
msgid "Paths with -a does not make sense."
msgstr "路径和 -a 选项同时使用没有意义。"
-#: builtin/commit.c:1341 builtin/commit.c:1617
+#: builtin/commit.c:1339 builtin/commit.c:1612
msgid "show status concisely"
msgstr "以简洁的格式显示状态"
-#: builtin/commit.c:1343 builtin/commit.c:1619
+#: builtin/commit.c:1341 builtin/commit.c:1614
msgid "show branch information"
msgstr "显示分支信息"
-#: builtin/commit.c:1345
+#: builtin/commit.c:1343
msgid "version"
msgstr "版本"
-#: builtin/commit.c:1345 builtin/commit.c:1621 builtin/push.c:522
-#: builtin/worktree.c:440
+#: builtin/commit.c:1343 builtin/commit.c:1616 builtin/push.c:525
+#: builtin/worktree.c:448
msgid "machine-readable output"
msgstr "机器可读的输出"
-#: builtin/commit.c:1348 builtin/commit.c:1623
+#: builtin/commit.c:1346 builtin/commit.c:1618
msgid "show status in long format (default)"
msgstr "以长格式显示状态（默认）"
-#: builtin/commit.c:1351 builtin/commit.c:1626
+#: builtin/commit.c:1349 builtin/commit.c:1621
msgid "terminate entries with NUL"
msgstr "条目以 NUL 字符结尾"
-#: builtin/commit.c:1353 builtin/commit.c:1629 builtin/fast-export.c:981
-#: builtin/fast-export.c:984 builtin/tag.c:353
+#: builtin/commit.c:1351 builtin/commit.c:1624 builtin/fast-export.c:981
+#: builtin/fast-export.c:984 builtin/tag.c:411
msgid "mode"
msgstr "模式"
-#: builtin/commit.c:1354 builtin/commit.c:1629
+#: builtin/commit.c:1352 builtin/commit.c:1624
msgid "show untracked files, optional modes: all, normal, no. (Default: all)"
msgstr "显示未跟踪的文件，“模式”的可选参数：all、normal、no。（默认：all）"
-#: builtin/commit.c:1357
+#: builtin/commit.c:1355
msgid "show ignored files"
msgstr "显示忽略的文件"
-#: builtin/commit.c:1358 parse-options.h:155
+#: builtin/commit.c:1356 parse-options.h:155
msgid "when"
msgstr "何时"
-#: builtin/commit.c:1359
+#: builtin/commit.c:1357
msgid ""
"ignore changes to submodules, optional when: all, dirty, untracked. "
"(Default: all)"
msgstr ""
"忽略子模组的更改，“何时”的可选参数：all、dirty、untracked。（默认：all）"
-#: builtin/commit.c:1361
+#: builtin/commit.c:1359
msgid "list untracked files in columns"
msgstr "以列的方式显示未跟踪的文件"
-#: builtin/commit.c:1437
+#: builtin/commit.c:1435
msgid "couldn't look up newly created commit"
msgstr "无法找到新创建的提交"
-#: builtin/commit.c:1439
+#: builtin/commit.c:1437
msgid "could not parse newly created commit"
msgstr "不能解析新创建的提交"
-#: builtin/commit.c:1484
+#: builtin/commit.c:1482
msgid "detached HEAD"
msgstr "分离头指针"
# 译者：中文字符串拼接，可删除前导空格
-#: builtin/commit.c:1487
+#: builtin/commit.c:1485
msgid " (root-commit)"
msgstr "（根提交）"
-#: builtin/commit.c:1587
+#: builtin/commit.c:1582
msgid "suppress summary after successful commit"
msgstr "提交成功后不显示概述信息"
-#: builtin/commit.c:1588
+#: builtin/commit.c:1583
msgid "show diff in commit message template"
msgstr "在提交说明模板里显示差异"
-#: builtin/commit.c:1590
+#: builtin/commit.c:1585
msgid "Commit message options"
msgstr "提交说明选项"
-#: builtin/commit.c:1591 builtin/tag.c:351
+#: builtin/commit.c:1586 builtin/tag.c:409
msgid "read message from file"
msgstr "从文件中读取提交说明"
-#: builtin/commit.c:1592
+#: builtin/commit.c:1587
msgid "author"
msgstr "作者"
-#: builtin/commit.c:1592
+#: builtin/commit.c:1587
msgid "override author for commit"
msgstr "提交时覆盖作者"
-#: builtin/commit.c:1593 builtin/gc.c:326
+#: builtin/commit.c:1588 builtin/gc.c:357
msgid "date"
msgstr "日期"
-#: builtin/commit.c:1593
+#: builtin/commit.c:1588
msgid "override date for commit"
msgstr "提交时覆盖日期"
-#: builtin/commit.c:1594 builtin/merge.c:220 builtin/notes.c:398
-#: builtin/notes.c:561 builtin/tag.c:349
+#: builtin/commit.c:1589 builtin/merge.c:221 builtin/notes.c:398
+#: builtin/notes.c:561 builtin/tag.c:407
msgid "message"
msgstr "说明"
-#: builtin/commit.c:1594
+#: builtin/commit.c:1589
msgid "commit message"
msgstr "提交说明"
-#: builtin/commit.c:1595 builtin/commit.c:1596 builtin/commit.c:1597
-#: builtin/commit.c:1598 parse-options.h:257 ref-filter.h:79
+#: builtin/commit.c:1590 builtin/commit.c:1591 builtin/commit.c:1592
+#: builtin/commit.c:1593 parse-options.h:257 ref-filter.h:77
msgid "commit"
msgstr "提交"
-#: builtin/commit.c:1595
+#: builtin/commit.c:1590
msgid "reuse and edit message from specified commit"
msgstr "重用并编辑指定提交的提交说明"
-#: builtin/commit.c:1596
+#: builtin/commit.c:1591
msgid "reuse message from specified commit"
msgstr "重用指定提交的提交说明"
-#: builtin/commit.c:1597
+#: builtin/commit.c:1592
msgid "use autosquash formatted message to fixup specified commit"
msgstr "使用 autosquash 格式的提交说明用以修正指定的提交"
-#: builtin/commit.c:1598
+#: builtin/commit.c:1593
msgid "use autosquash formatted message to squash specified commit"
msgstr "使用 autosquash 格式的提交说明用以压缩至指定的提交"
-#: builtin/commit.c:1599
+#: builtin/commit.c:1594
msgid "the commit is authored by me now (used with -C/-c/--amend)"
msgstr "现在将该提交的作者改为我（和 -C/-c/--amend 参数共用）"
-#: builtin/commit.c:1600 builtin/log.c:1413 builtin/revert.c:86
+#: builtin/commit.c:1595 builtin/log.c:1420 builtin/revert.c:104
msgid "add Signed-off-by:"
msgstr "添加 Signed-off-by: 签名"
-#: builtin/commit.c:1601
+#: builtin/commit.c:1596
msgid "use specified template file"
msgstr "使用指定的模板文件"
-#: builtin/commit.c:1602
+#: builtin/commit.c:1597
msgid "force edit of commit"
msgstr "强制编辑提交"
# 译者：可选值，不能翻译（或是原文中笔误，应为 mode）
-#: builtin/commit.c:1603
+#: builtin/commit.c:1598
msgid "default"
msgstr "default"
-#: builtin/commit.c:1603 builtin/tag.c:354
+#: builtin/commit.c:1598 builtin/tag.c:412
msgid "how to strip spaces and #comments from message"
msgstr "设置如何删除提交说明里的空格和#注释"
-#: builtin/commit.c:1604
+#: builtin/commit.c:1599
msgid "include status in commit message template"
msgstr "在提交说明模板里包含状态信息"
-#: builtin/commit.c:1606 builtin/merge.c:230 builtin/pull.c:166
-#: builtin/revert.c:93
+#: builtin/commit.c:1601 builtin/merge.c:233 builtin/pull.c:166
+#: builtin/revert.c:112
msgid "GPG sign commit"
msgstr "GPG 提交签名"
-#: builtin/commit.c:1609
+#: builtin/commit.c:1604
msgid "Commit contents options"
msgstr "提交内容选项"
-#: builtin/commit.c:1610
+#: builtin/commit.c:1605
msgid "commit all changed files"
msgstr "提交所有改动的文件"
-#: builtin/commit.c:1611
+#: builtin/commit.c:1606
msgid "add specified files to index for commit"
msgstr "添加指定的文件到索引区等待提交"
-#: builtin/commit.c:1612
+#: builtin/commit.c:1607
msgid "interactively add files"
msgstr "交互式添加文件"
-#: builtin/commit.c:1613
+#: builtin/commit.c:1608
msgid "interactively add changes"
msgstr "交互式添加变更"
-#: builtin/commit.c:1614
+#: builtin/commit.c:1609
msgid "commit only specified files"
msgstr "只提交指定的文件"
-#: builtin/commit.c:1615
+#: builtin/commit.c:1610
msgid "bypass pre-commit and commit-msg hooks"
msgstr "绕过 pre-commit 和 commit-msg 钩子"
-#: builtin/commit.c:1616
+#: builtin/commit.c:1611
msgid "show what would be committed"
msgstr "显示将要提交的内容"
-#: builtin/commit.c:1627
+#: builtin/commit.c:1622
msgid "amend previous commit"
msgstr "修改先前的提交"
-#: builtin/commit.c:1628
+#: builtin/commit.c:1623
msgid "bypass post-rewrite hook"
msgstr "绕过 post-rewrite 钩子"
-#: builtin/commit.c:1633
+#: builtin/commit.c:1628
msgid "ok to record an empty change"
msgstr "允许一个空提交"
-#: builtin/commit.c:1635
+#: builtin/commit.c:1630
msgid "ok to record a change with an empty message"
msgstr "允许空的提交说明"
-#: builtin/commit.c:1664
+#: builtin/commit.c:1659
msgid "could not parse HEAD commit"
msgstr "不能解析 HEAD 提交"
-#: builtin/commit.c:1712
+#: builtin/commit.c:1707
#, c-format
msgid "Corrupt MERGE_HEAD file (%s)"
msgstr "损坏的 MERGE_HEAD 文件（%s）"
-#: builtin/commit.c:1719
+#: builtin/commit.c:1714
msgid "could not read MERGE_MODE"
msgstr "不能读取 MERGE_MODE"
-#: builtin/commit.c:1738
+#: builtin/commit.c:1733
#, c-format
msgid "could not read commit message: %s"
msgstr "不能读取提交说明：%s"
-#: builtin/commit.c:1749
+#: builtin/commit.c:1744
#, c-format
msgid "Aborting commit; you did not edit the message.\n"
msgstr "终止提交；您未更改来自模版的提交说明。\n"
-#: builtin/commit.c:1754
+#: builtin/commit.c:1749
#, c-format
msgid "Aborting commit due to empty commit message.\n"
msgstr "终止提交因为提交说明为空。\n"
-#: builtin/commit.c:1802
+#: builtin/commit.c:1797
msgid ""
"Repository has been updated, but unable to write\n"
"new_index file. Check that disk is not full and quota is\n"
msgid "git config [<options>]"
msgstr "git config [<选项>]"
-#: builtin/config.c:55
+#: builtin/config.c:56
msgid "Config file location"
msgstr "配置文件位置"
-#: builtin/config.c:56
+#: builtin/config.c:57
msgid "use global config file"
msgstr "使用全局配置文件"
-#: builtin/config.c:57
+#: builtin/config.c:58
msgid "use system config file"
msgstr "使用系统级配置文件"
-#: builtin/config.c:58
+#: builtin/config.c:59
msgid "use repository config file"
msgstr "使用仓库级配置文件"
-#: builtin/config.c:59
+#: builtin/config.c:60
msgid "use given config file"
msgstr "使用指定的配置文件"
-#: builtin/config.c:60
+#: builtin/config.c:61
msgid "blob-id"
msgstr "数据对象 ID"
-#: builtin/config.c:60
+#: builtin/config.c:61
msgid "read config from given blob object"
msgstr "从给定的数据对象读取配置"
-#: builtin/config.c:61
+#: builtin/config.c:62
msgid "Action"
msgstr "操作"
-#: builtin/config.c:62
+#: builtin/config.c:63
msgid "get value: name [value-regex]"
msgstr "获取值：name [value-regex]"
-#: builtin/config.c:63
+#: builtin/config.c:64
msgid "get all values: key [value-regex]"
msgstr "获得所有的值：key [value-regex]"
-#: builtin/config.c:64
+#: builtin/config.c:65
msgid "get values for regexp: name-regex [value-regex]"
msgstr "根据正则表达式获得值：name-regex [value-regex]"
-#: builtin/config.c:65
+#: builtin/config.c:66
msgid "get value specific for the URL: section[.var] URL"
msgstr "获得 URL 取值：section[.var] URL"
-#: builtin/config.c:66
+#: builtin/config.c:67
msgid "replace all matching variables: name value [value_regex]"
msgstr "替换所有匹配的变量：name value [value_regex]"
-#: builtin/config.c:67
+#: builtin/config.c:68
msgid "add a new variable: name value"
msgstr "添加一个新的变量：name value"
-#: builtin/config.c:68
+#: builtin/config.c:69
msgid "remove a variable: name [value-regex]"
msgstr "删除一个变量：name [value-regex]"
-#: builtin/config.c:69
+#: builtin/config.c:70
msgid "remove all matches: name [value-regex]"
msgstr "删除所有匹配项：name [value-regex]"
-#: builtin/config.c:70
+#: builtin/config.c:71
msgid "rename section: old-name new-name"
msgstr "重命名小节：old-name new-name"
-#: builtin/config.c:71
+#: builtin/config.c:72
msgid "remove a section: name"
msgstr "删除一个小节：name"
-#: builtin/config.c:72
+#: builtin/config.c:73
msgid "list all"
msgstr "列出所有"
-#: builtin/config.c:73
+#: builtin/config.c:74
msgid "open an editor"
msgstr "打开一个编辑器"
-#: builtin/config.c:74
+#: builtin/config.c:75
msgid "find the color configured: slot [default]"
msgstr "获得配置的颜色：配置 [默认]"
-#: builtin/config.c:75
+#: builtin/config.c:76
msgid "find the color setting: slot [stdout-is-tty]"
msgstr "获得颜色设置：配置 [stdout-is-tty]"
-#: builtin/config.c:76
+#: builtin/config.c:77
msgid "Type"
msgstr "类型"
-#: builtin/config.c:77
+#: builtin/config.c:78
msgid "value is \"true\" or \"false\""
msgstr "值是 \"true\" 或 \"false\""
-#: builtin/config.c:78
+#: builtin/config.c:79
msgid "value is decimal number"
msgstr "值是十进制数"
-#: builtin/config.c:79
+#: builtin/config.c:80
msgid "value is --bool or --int"
msgstr "值是 --bool or --int"
-#: builtin/config.c:80
+#: builtin/config.c:81
msgid "value is a path (file or directory name)"
msgstr "值是一个路径（文件或目录名）"
-#: builtin/config.c:81
+#: builtin/config.c:82
msgid "Other"
msgstr "其它"
-#: builtin/config.c:82
+#: builtin/config.c:83
msgid "terminate values with NUL byte"
msgstr "终止值是 NUL 字节"
-#: builtin/config.c:83
+#: builtin/config.c:84
msgid "show variable names only"
msgstr "只显示变量名"
-#: builtin/config.c:84
+#: builtin/config.c:85
msgid "respect include directives on lookup"
msgstr "查询时参照 include 指令递归查找"
-#: builtin/config.c:85
+#: builtin/config.c:86
msgid "show origin of config (file, standard input, blob, command line)"
msgstr "显示配置的来源（文件、标准输入、数据对象，或命令行）"
-#: builtin/config.c:327
+#: builtin/config.c:328
msgid "unable to parse default color value"
msgstr "不能解析默认颜色值"
-#: builtin/config.c:471
+#: builtin/config.c:472
#, c-format
msgid ""
"# This is Git's per-user configuration file.\n"
"#\tname = %s\n"
"#\temail = %s\n"
-#: builtin/config.c:613
+#: builtin/config.c:615
#, c-format
msgid "cannot create configuration file %s"
msgstr "不能创建配置文件 %s"
-#: builtin/config.c:625
+#: builtin/config.c:627
#, c-format
msgid ""
"cannot overwrite multiple values with a single value\n"
msgid "print sizes in human readable format"
msgstr "以用户可读的格式显示大小"
-#: builtin/describe.c:17
+#: builtin/describe.c:18
msgid "git describe [<options>] [<commit-ish>...]"
msgstr "git describe [<选项>] [<提交号>...]"
-#: builtin/describe.c:18
+#: builtin/describe.c:19
msgid "git describe [<options>] --dirty"
msgstr "git describe [<选项>] --dirty"
-#: builtin/describe.c:217
+#: builtin/describe.c:53
+msgid "head"
+msgstr "头"
+
+#: builtin/describe.c:53
+msgid "lightweight"
+msgstr "轻量级的"
+
+#: builtin/describe.c:53
+msgid "annotated"
+msgstr "附注的"
+
+#: builtin/describe.c:250
#, c-format
msgid "annotated tag %s not available"
msgstr "附注标签 %s 无效"
-#: builtin/describe.c:221
+#: builtin/describe.c:254
#, c-format
msgid "annotated tag %s has no embedded name"
msgstr "附注标签 %s 没有嵌入名称"
-#: builtin/describe.c:223
+#: builtin/describe.c:256
#, c-format
msgid "tag '%s' is really '%s' here"
msgstr "标签 '%s' 的确是在 '%s'"
-#: builtin/describe.c:250 builtin/log.c:480
+#: builtin/describe.c:283 builtin/log.c:487
#, c-format
msgid "Not a valid object name %s"
msgstr "不是一个有效的对象名 %s"
-#: builtin/describe.c:253
+#: builtin/describe.c:286
#, c-format
msgid "%s is not a valid '%s' object"
msgstr "%s 不是一个有效的 '%s' 对象"
-#: builtin/describe.c:270
+#: builtin/describe.c:303
#, c-format
msgid "no tag exactly matches '%s'"
msgstr "没有标签准确匹配 '%s'"
-#: builtin/describe.c:272
+#: builtin/describe.c:305
#, c-format
msgid "searching to describe %s\n"
msgstr "搜索描述 %s\n"
-#: builtin/describe.c:319
+#: builtin/describe.c:352
#, c-format
msgid "finished search at %s\n"
msgstr "完成搜索 %s\n"
-#: builtin/describe.c:346
+#: builtin/describe.c:379
#, c-format
msgid ""
"No annotated tags can describe '%s'.\n"
"没有附注标签能描述 '%s'。\n"
"然而，存在未附注标签：尝试 --tags。"
-#: builtin/describe.c:350
+#: builtin/describe.c:383
#, c-format
msgid ""
"No tags can describe '%s'.\n"
"没有标签能描述 '%s'。\n"
"尝试 --always，或者创建一些标签。"
-#: builtin/describe.c:371
+#: builtin/describe.c:413
#, c-format
msgid "traversed %lu commits\n"
msgstr "已遍历 %lu 个提交\n"
-#: builtin/describe.c:374
+#: builtin/describe.c:416
#, c-format
msgid ""
"more than %i tags found; listed %i most recent\n"
"发现多于 %i 个标签，列出最近的 %i 个\n"
"在 %s 放弃搜索\n"
-#: builtin/describe.c:396
+#: builtin/describe.c:438
msgid "find the tag that comes after the commit"
msgstr "寻找该提交之后的标签"
-#: builtin/describe.c:397
+#: builtin/describe.c:439
msgid "debug search strategy on stderr"
msgstr "在标准错误上调试搜索策略"
-#: builtin/describe.c:398
+#: builtin/describe.c:440
msgid "use any ref"
msgstr "使用任意引用"
-#: builtin/describe.c:399
+#: builtin/describe.c:441
msgid "use any tag, even unannotated"
msgstr "使用任意标签，即使未附带注释"
-#: builtin/describe.c:400
+#: builtin/describe.c:442
msgid "always use long format"
msgstr "始终使用长提交号格式"
-#: builtin/describe.c:401
+#: builtin/describe.c:443
msgid "only follow first parent"
msgstr "只跟随第一个父提交"
-#: builtin/describe.c:404
+#: builtin/describe.c:446
msgid "only output exact matches"
msgstr "只输出精确匹配"
-#: builtin/describe.c:406
+#: builtin/describe.c:448
msgid "consider <n> most recent tags (default: 10)"
msgstr "考虑最近 <n> 个标签（默认：10）"
-#: builtin/describe.c:408
+#: builtin/describe.c:450
msgid "only consider tags matching <pattern>"
msgstr "只考虑匹配 <模式> 的标签"
-#: builtin/describe.c:410 builtin/name-rev.c:320
+#: builtin/describe.c:452
+msgid "do not consider tags matching <pattern>"
+msgstr "不考虑匹配 <模式> 的标签"
+
+#: builtin/describe.c:454 builtin/name-rev.c:357
msgid "show abbreviated commit object as fallback"
msgstr "显示简写的提交号作为后备"
-#: builtin/describe.c:411
+#: builtin/describe.c:455 builtin/describe.c:458
msgid "mark"
msgstr "标记"
-#: builtin/describe.c:412
+#: builtin/describe.c:456
msgid "append <mark> on dirty working tree (default: \"-dirty\")"
msgstr "对于脏工作区，追加 <标记>（默认：\"-dirty\"）"
-#: builtin/describe.c:430
+#: builtin/describe.c:459
+msgid "append <mark> on broken working tree (default: \"-broken\")"
+msgstr "对于损坏的工作区，追加 <标记>（默认：\"-broken\"）"
+
+#: builtin/describe.c:477
msgid "--long is incompatible with --abbrev=0"
msgstr "--long 与 --abbrev=0 不兼容"
-#: builtin/describe.c:456
+#: builtin/describe.c:506
msgid "No names found, cannot describe anything."
msgstr "没有发现名称，无法描述任何东西。"
-#: builtin/describe.c:476
+#: builtin/describe.c:549
msgid "--dirty is incompatible with commit-ishes"
-msgstr "--dirty 不能与提交同时使用"
+msgstr "--dirty 与提交号不兼容"
+
+#: builtin/describe.c:551
+msgid "--broken is incompatible with commit-ishes"
+msgstr "--broken 与提交号不兼容"
-#: builtin/diff.c:86
+#: builtin/diff.c:83
#, c-format
msgid "'%s': not a regular file or symlink"
msgstr "'%s'：不是一个正规文件或符号链接"
-#: builtin/diff.c:237
+#: builtin/diff.c:234
#, c-format
msgid "invalid option: %s"
msgstr "无效选项：%s"
-#: builtin/diff.c:361
+#: builtin/diff.c:358
msgid "Not a git repository"
msgstr "不是一个 git 仓库"
-#: builtin/diff.c:404
+#: builtin/diff.c:401
#, c-format
msgid "invalid object '%s' given."
msgstr "提供了无效对象 '%s'。"
-#: builtin/diff.c:413
+#: builtin/diff.c:410
#, c-format
msgid "more than two blobs given: '%s'"
msgstr "提供了超过两个数据对象：'%s'"
-#: builtin/diff.c:420
+#: builtin/diff.c:417
#, c-format
msgid "unhandled object '%s' given."
msgstr "无法处理的对象 '%s'。"
+#: builtin/difftool.c:28
+msgid "git difftool [<options>] [<commit> [<commit>]] [--] [<path>...]"
+msgstr "git difftool [<选项>] [<提交> [<提交>]] [--] [<路径>...]"
+
+#: builtin/difftool.c:241
+#, c-format
+msgid "failed: %d"
+msgstr "失败：%d"
+
+#: builtin/difftool.c:283
+#, c-format
+msgid "could not read symlink %s"
+msgstr "无法读取符号链接 %s"
+
+#: builtin/difftool.c:285
+#, c-format
+msgid "could not read symlink file %s"
+msgstr "无法读取符号链接文件 %s"
+
+#: builtin/difftool.c:293
+#, c-format
+msgid "could not read object %s for symlink %s"
+msgstr "无法读取符号链接 %2$s 指向的对象 %1$s"
+
+#: builtin/difftool.c:395
+msgid ""
+"combined diff formats('-c' and '--cc') are not supported in\n"
+"directory diff mode('-d' and '--dir-diff')."
+msgstr ""
+"不支持在目录比较模式（'-d' 和 '--dir-diff'）中采用组合差异格式（'-c' 和 '--"
+"cc'）。"
+
+#: builtin/difftool.c:609
+#, c-format
+msgid "both files modified: '%s' and '%s'."
+msgstr "两个文件都被修改：'%s' 和 '%s'。"
+
+#: builtin/difftool.c:611
+msgid "working tree file has been left."
+msgstr "工作区文件被留了下来。"
+
+#: builtin/difftool.c:622
+#, c-format
+msgid "temporary files exist in '%s'."
+msgstr "临时文件存在于 '%s'。"
+
+#: builtin/difftool.c:623
+msgid "you may want to cleanup or recover these."
+msgstr "您可能想要清理或者恢复它们。"
+
+#: builtin/difftool.c:669
+msgid "use `diff.guitool` instead of `diff.tool`"
+msgstr "使用 `diff.guitool` 代替 `diff.tool`"
+
+#: builtin/difftool.c:671
+msgid "perform a full-directory diff"
+msgstr "执行一个全目录差异比较"
+
+#: builtin/difftool.c:673
+msgid "do not prompt before launching a diff tool"
+msgstr "启动差异比较工具之前不提示"
+
+#: builtin/difftool.c:679
+msgid "use symlinks in dir-diff mode"
+msgstr "在 dir-diff 模式中使用符号链接"
+
+#: builtin/difftool.c:680
+msgid "<tool>"
+msgstr "<工具>"
+
+#: builtin/difftool.c:681
+msgid "use the specified diff tool"
+msgstr "使用指定的差异比较工具"
+
+#: builtin/difftool.c:683
+msgid "print a list of diff tools that may be used with `--tool`"
+msgstr "显示可以用在 `--tool` 参数后的差异工具列表"
+
+#: builtin/difftool.c:686
+msgid ""
+"make 'git-difftool' exit when an invoked diff tool returns a non - zero exit "
+"code"
+msgstr "当执行 diff 工具返回非零退出码时，使 'git-difftool' 退出"
+
+#: builtin/difftool.c:688
+msgid "<command>"
+msgstr "<命令>"
+
+#: builtin/difftool.c:689
+msgid "specify a custom command for viewing diffs"
+msgstr "指定一个用于查看差异的自定义命令"
+
+#: builtin/difftool.c:713
+msgid "no <tool> given for --tool=<tool>"
+msgstr "没有为 --tool=<工具> 参数提供 <工具>"
+
+#: builtin/difftool.c:720
+msgid "no <cmd> given for --extcmd=<cmd>"
+msgstr "没有为 --extcmd=<命令> 参数提供 <命令>"
+
#: builtin/fast-export.c:25
msgid "git fast-export [rev-list-opts]"
msgstr "git fast-export [rev-list-opts]"
msgid "convert to a complete repository"
msgstr "转换为一个完整的仓库"
-#: builtin/fetch.c:131 builtin/log.c:1433
+#: builtin/fetch.c:131 builtin/log.c:1440
msgid "dir"
msgstr "目录"
msgid "specify fetch refmap"
msgstr "指定获取操作的引用映射"
-#: builtin/fetch.c:398
+#: builtin/fetch.c:395
msgid "Couldn't find remote ref HEAD"
msgstr "无法发现远程 HEAD 引用"
-#: builtin/fetch.c:514
+#: builtin/fetch.c:513
#, c-format
msgid "configuration fetch.output contains invalid value %s"
msgstr "配置变量 fetch.output 包含无效值 %s"
-#: builtin/fetch.c:607
+#: builtin/fetch.c:606
#, c-format
msgid "object %s not found"
msgstr "对象 %s 未发现"
-#: builtin/fetch.c:611
+#: builtin/fetch.c:610
msgid "[up to date]"
msgstr "[最新]"
-#: builtin/fetch.c:624 builtin/fetch.c:704
+#: builtin/fetch.c:623 builtin/fetch.c:703
msgid "[rejected]"
msgstr "[已拒绝]"
-#: builtin/fetch.c:625
+#: builtin/fetch.c:624
msgid "can't fetch in current branch"
msgstr "当前分支下不能执行获取操作"
-#: builtin/fetch.c:634
+#: builtin/fetch.c:633
msgid "[tag update]"
msgstr "[标签更新]"
-#: builtin/fetch.c:635 builtin/fetch.c:668 builtin/fetch.c:684
-#: builtin/fetch.c:699
+#: builtin/fetch.c:634 builtin/fetch.c:667 builtin/fetch.c:683
+#: builtin/fetch.c:698
msgid "unable to update local ref"
msgstr "不能更新本地引用"
-#: builtin/fetch.c:654
+#: builtin/fetch.c:653
msgid "[new tag]"
msgstr "[新标签]"
-#: builtin/fetch.c:657
+#: builtin/fetch.c:656
msgid "[new branch]"
msgstr "[新分支]"
-#: builtin/fetch.c:660
+#: builtin/fetch.c:659
msgid "[new ref]"
msgstr "[新引用]"
-#: builtin/fetch.c:699
+#: builtin/fetch.c:698
msgid "forced update"
msgstr "强制更新"
-#: builtin/fetch.c:704
+#: builtin/fetch.c:703
msgid "non-fast-forward"
msgstr "非快进"
-#: builtin/fetch.c:749
+#: builtin/fetch.c:748
#, c-format
msgid "%s did not send all necessary objects\n"
msgstr "%s 未发送所有必须的对象\n"
-#: builtin/fetch.c:769
+#: builtin/fetch.c:768
#, c-format
msgid "reject %s because shallow roots are not allowed to be updated"
msgstr "拒绝 %s 因为浅克隆不允许被更新"
-#: builtin/fetch.c:856 builtin/fetch.c:952
+#: builtin/fetch.c:855 builtin/fetch.c:951
#, c-format
msgid "From %.*s\n"
msgstr "来自 %.*s\n"
-#: builtin/fetch.c:867
+#: builtin/fetch.c:866
#, c-format
msgid ""
"some local refs could not be updated; try running\n"
" 'git remote prune %s' 来删除旧的、有冲突的分支"
# 译者：注意保持前导空格
-#: builtin/fetch.c:922
+#: builtin/fetch.c:921
#, c-format
msgid " (%s will become dangling)"
msgstr " （%s 将成为摇摆状态）"
# 译者：注意保持前导空格
-#: builtin/fetch.c:923
+#: builtin/fetch.c:922
#, c-format
msgid " (%s has become dangling)"
msgstr " （%s 已成为摇摆状态）"
-#: builtin/fetch.c:955
+#: builtin/fetch.c:954
msgid "[deleted]"
msgstr "[已删除]"
-#: builtin/fetch.c:956 builtin/remote.c:1020
+#: builtin/fetch.c:955 builtin/remote.c:1022
msgid "(none)"
msgstr "（无）"
-#: builtin/fetch.c:979
+#: builtin/fetch.c:978
#, c-format
msgid "Refusing to fetch into current branch %s of non-bare repository"
msgstr "拒绝获取到非纯仓库的当前分支 %s"
-#: builtin/fetch.c:998
+#: builtin/fetch.c:997
#, c-format
msgid "Option \"%s\" value \"%s\" is not valid for %s"
msgstr "选项 \"%s\" 的值 \"%s\" 对于 %s 是无效的"
-#: builtin/fetch.c:1001
+#: builtin/fetch.c:1000
#, c-format
msgid "Option \"%s\" is ignored for %s\n"
msgstr "选项 \"%s\" 为 %s 所忽略\n"
-#: builtin/fetch.c:1077
+#: builtin/fetch.c:1076
#, c-format
msgid "Don't know how to fetch from %s"
msgstr "不知道如何从 %s 获取"
-#: builtin/fetch.c:1237
+#: builtin/fetch.c:1236
#, c-format
msgid "Fetching %s\n"
msgstr "正在获取 %s\n"
-#: builtin/fetch.c:1239 builtin/remote.c:96
+#: builtin/fetch.c:1238 builtin/remote.c:96
#, c-format
msgid "Could not fetch %s"
msgstr "不能获取 %s"
-#: builtin/fetch.c:1257
+#: builtin/fetch.c:1256
msgid ""
"No remote repository specified. Please, specify either a URL or a\n"
"remote name from which new revisions should be fetched."
msgstr "未指定远程仓库。请通过一个 URL 或远程仓库名指定，用以获取新提交。"
-#: builtin/fetch.c:1280
+#: builtin/fetch.c:1279
msgid "You need to specify a tag name."
msgstr "您需要指定一个标签名称。"
-#: builtin/fetch.c:1322
+#: builtin/fetch.c:1321
msgid "Negative depth in --deepen is not supported"
msgstr "--deepen 不支持负数深度"
-#: builtin/fetch.c:1324
+#: builtin/fetch.c:1323
msgid "--deepen and --depth are mutually exclusive"
msgstr "--deepen 和 --depth 是互斥的"
-#: builtin/fetch.c:1329
+#: builtin/fetch.c:1328
msgid "--depth and --unshallow cannot be used together"
msgstr "--depth 和 --unshallow 不能同时使用"
-#: builtin/fetch.c:1331
+#: builtin/fetch.c:1330
msgid "--unshallow on a complete repository does not make sense"
msgstr "对于一个完整的仓库，参数 --unshallow 没有意义"
-#: builtin/fetch.c:1353
+#: builtin/fetch.c:1352
msgid "fetch --all does not take a repository argument"
msgstr "fetch --all 不能带一个仓库参数"
-#: builtin/fetch.c:1355
+#: builtin/fetch.c:1354
msgid "fetch --all does not make sense with refspecs"
msgstr "fetch --all 带引用规格没有任何意义"
-#: builtin/fetch.c:1366
+#: builtin/fetch.c:1365
#, c-format
msgid "No such remote or remote group: %s"
msgstr "没有这样的远程或远程组：%s"
-#: builtin/fetch.c:1374
+#: builtin/fetch.c:1373
msgid "Fetching a group and specifying refspecs does not make sense"
msgstr "获取组并指定引用规格没有意义"
msgstr "git for-each-ref [--points-at <对象>]"
#: builtin/for-each-ref.c:11
-msgid "git for-each-ref [(--merged | --no-merged) [<object>]]"
-msgstr "git for-each-ref [(--merged | --no-merged) [<对象>]]"
+msgid "git for-each-ref [(--merged | --no-merged) [<commit>]]"
+msgstr "git for-each-ref [(--merged | --no-merged) [<提交>]]"
#: builtin/for-each-ref.c:12
-msgid "git for-each-ref [--contains [<object>]]"
-msgstr "git for-each-ref [--contains [<对象>]]"
+msgid "git for-each-ref [--contains [<commit>]] [--no-contains [<commit>]]"
+msgstr "git for-each-ref [--contains [<提交>]] [--no-contains [<提交>]]"
#: builtin/for-each-ref.c:27
msgid "quote placeholders suitably for shells"
msgid "show only <n> matched refs"
msgstr "只显示 <n> 个匹配的引用"
-#: builtin/for-each-ref.c:37 builtin/tag.c:372
-msgid "format to use for the output"
-msgstr "输出格式"
-
#: builtin/for-each-ref.c:41
msgid "print only refs which points at the given object"
msgstr "只打印指向给定对象的引用"
msgid "print only refs which contain the commit"
msgstr "只打印包含该提交的引用"
-#: builtin/fsck.c:519
+#: builtin/for-each-ref.c:46
+msgid "print only refs which don't contain the commit"
+msgstr "只打印不包含该提交的引用"
+
+#: builtin/fsck.c:554
msgid "Checking object directories"
msgstr "检查对象目录中"
-#: builtin/fsck.c:588
+#: builtin/fsck.c:646
msgid "git fsck [<options>] [<object>...]"
msgstr "git fsck [<选项>] [<对象>...]"
-#: builtin/fsck.c:594
+#: builtin/fsck.c:652
msgid "show unreachable objects"
msgstr "显示不可达的对象"
-#: builtin/fsck.c:595
+#: builtin/fsck.c:653
msgid "show dangling objects"
msgstr "显示摇摆的对象"
-#: builtin/fsck.c:596
+#: builtin/fsck.c:654
msgid "report tags"
msgstr "报告标签"
-#: builtin/fsck.c:597
+#: builtin/fsck.c:655
msgid "report root nodes"
msgstr "报告根节点"
-#: builtin/fsck.c:598
+#: builtin/fsck.c:656
msgid "make index objects head nodes"
msgstr "将索引亦作为检查的头节点"
-#: builtin/fsck.c:599
+#: builtin/fsck.c:657
msgid "make reflogs head nodes (default)"
msgstr "将引用日志作为检查的头节点（默认）"
-#: builtin/fsck.c:600
+#: builtin/fsck.c:658
msgid "also consider packs and alternate objects"
msgstr "也考虑包和备用对象"
-#: builtin/fsck.c:601
+#: builtin/fsck.c:659
msgid "check only connectivity"
msgstr "仅检查连通性"
-#: builtin/fsck.c:602
+#: builtin/fsck.c:660
msgid "enable more strict checking"
msgstr "启用更严格的检查"
-#: builtin/fsck.c:604
+#: builtin/fsck.c:662
msgid "write dangling objects in .git/lost-found"
msgstr "将摇摆对象写入 .git/lost-found 中"
-#: builtin/fsck.c:605 builtin/prune.c:107
+#: builtin/fsck.c:663 builtin/prune.c:107
msgid "show progress"
msgstr "显示进度"
-#: builtin/fsck.c:606
+#: builtin/fsck.c:664
msgid "show verbose names for reachable objects"
msgstr "显示可达对象的详细名称"
-#: builtin/fsck.c:665
+#: builtin/fsck.c:725
msgid "Checking objects"
msgstr "检查对象中"
msgid "git gc [<options>]"
msgstr "git gc [<选项>]"
-#: builtin/gc.c:72
+#: builtin/gc.c:78
#, c-format
-msgid "Invalid %s: '%s'"
-msgstr "无效 %s：'%s'"
+msgid "Failed to fstat %s: %s"
+msgstr "对 %s 调用 fstat 失败：%s"
-#: builtin/gc.c:139
+#: builtin/gc.c:310
#, c-format
-msgid "insanely long object directory %.*s"
-msgstr "不正常的长对象目录 %.*s"
+msgid "Can't stat %s"
+msgstr "不能对 %s 调用 stat"
-#: builtin/gc.c:290
+#: builtin/gc.c:319
#, c-format
msgid ""
"The last gc run reported the following. Please correct the root cause\n"
"\n"
"%s"
-#: builtin/gc.c:327
+#: builtin/gc.c:358
msgid "prune unreferenced objects"
msgstr "清除未引用的对象"
-#: builtin/gc.c:329
+#: builtin/gc.c:360
msgid "be more thorough (increased runtime)"
msgstr "更彻底（增加运行时间）"
-#: builtin/gc.c:330
+#: builtin/gc.c:361
msgid "enable auto-gc mode"
msgstr "启用自动垃圾回收模式"
-#: builtin/gc.c:331
+#: builtin/gc.c:362
msgid "force running gc even if there may be another gc running"
msgstr "强制执行 gc 即使另外一个 gc 正在执行"
-#: builtin/gc.c:373
+#: builtin/gc.c:379
+#, c-format
+msgid "Failed to parse gc.logexpiry value %s"
+msgstr "无法解析 gc.logexpiry 的值 %s"
+
+#: builtin/gc.c:407
#, c-format
msgid "Auto packing the repository in background for optimum performance.\n"
msgstr "自动在后台执行仓库打包以求最佳性能。\n"
-#: builtin/gc.c:375
+#: builtin/gc.c:409
#, c-format
msgid "Auto packing the repository for optimum performance.\n"
msgstr "自动打包仓库以求最佳性能。\n"
-#: builtin/gc.c:376
+#: builtin/gc.c:410
#, c-format
msgid "See \"git help gc\" for manual housekeeping.\n"
msgstr "手工维护参见 \"git help gc\"。\n"
-#: builtin/gc.c:397
+#: builtin/gc.c:431
#, c-format
msgid ""
"gc is already running on machine '%s' pid %<PRIuMAX> (use --force if not)"
msgstr ""
-"已经有一个 gc 正运行在机器 '%s' pid %<PRIuMAX> （如果不是，使用 --force）"
+"已经有一个 gc 正运行在机器 '%s' pid %<PRIuMAX>（如果不是，使用 --force）"
-#: builtin/gc.c:441
+#: builtin/gc.c:475
msgid ""
"There are too many unreachable loose objects; run 'git prune' to remove them."
msgstr "有太多不可达的松散对象，运行 'git prune' 删除它们。"
-#: builtin/grep.c:23
+#: builtin/grep.c:25
msgid "git grep [<options>] [-e] <pattern> [<rev>...] [[--] <path>...]"
msgstr "git grep [<选项>] [-e] <模式> [<版本>...] [[--] <路径>...]"
-#: builtin/grep.c:219
+#: builtin/grep.c:232
#, c-format
msgid "grep: failed to create thread: %s"
msgstr "grep：无法创建线程：%s"
-#: builtin/grep.c:277
+#: builtin/grep.c:290
#, c-format
msgid "invalid number of threads specified (%d) for %s"
msgstr "为 %2$s 设定的线程数 (%1$d) 无效"
-#: builtin/grep.c:453 builtin/grep.c:488
+#: builtin/grep.c:769 builtin/grep.c:810
#, c-format
msgid "unable to read tree (%s)"
msgstr "无法读取树（%s）"
-#: builtin/grep.c:503
+#: builtin/grep.c:829
#, c-format
msgid "unable to grep from object of type %s"
msgstr "无法抓取来自于 %s 类型的对象"
-#: builtin/grep.c:561
+#: builtin/grep.c:893
#, c-format
msgid "switch `%c' expects a numerical value"
msgstr "开关 `%c' 期望一个数字值"
-#: builtin/grep.c:647
+#: builtin/grep.c:980
msgid "search in index instead of in the work tree"
msgstr "在索引区搜索而不是在工作区"
-#: builtin/grep.c:649
+#: builtin/grep.c:982
msgid "find in contents not managed by git"
msgstr "在未被 git 管理的内容中查找"
# 译者：中文字符串拼接，可删除前导空格
-#: builtin/grep.c:651
+#: builtin/grep.c:984
msgid "search in both tracked and untracked files"
msgstr "在跟踪和未跟踪的文件中搜索"
-#: builtin/grep.c:653
+#: builtin/grep.c:986
msgid "ignore files specified via '.gitignore'"
msgstr "忽略 '.gitignore' 包含的文件"
-#: builtin/grep.c:656
+#: builtin/grep.c:988
+msgid "recursively search in each submodule"
+msgstr "在每一个子模组中递归搜索"
+
+#: builtin/grep.c:990
+msgid "basename"
+msgstr "基本名"
+
+#: builtin/grep.c:991
+msgid "prepend parent project's basename to output"
+msgstr "在输出中以父项目的基本名为前缀"
+
+#: builtin/grep.c:994
msgid "show non-matching lines"
msgstr "显示未匹配的行"
-#: builtin/grep.c:658
+#: builtin/grep.c:996
msgid "case insensitive matching"
msgstr "不区分大小写匹配"
-#: builtin/grep.c:660
+#: builtin/grep.c:998
msgid "match patterns only at word boundaries"
msgstr "只在单词边界匹配模式"
-#: builtin/grep.c:662
+#: builtin/grep.c:1000
msgid "process binary files as text"
msgstr "把二进制文件当做文本处理"
-#: builtin/grep.c:664
+#: builtin/grep.c:1002
msgid "don't match patterns in binary files"
msgstr "不在二进制文件中匹配模式"
-#: builtin/grep.c:667
+#: builtin/grep.c:1005
msgid "process binary files with textconv filters"
msgstr "用 textconv 过滤器处理二进制文件"
-#: builtin/grep.c:669
+#: builtin/grep.c:1007
msgid "descend at most <depth> levels"
msgstr "最多以指定的深度向下寻找"
-#: builtin/grep.c:673
+#: builtin/grep.c:1011
msgid "use extended POSIX regular expressions"
msgstr "使用扩展的 POSIX 正则表达式"
-#: builtin/grep.c:676
+#: builtin/grep.c:1014
msgid "use basic POSIX regular expressions (default)"
msgstr "使用基本的 POSIX 正则表达式（默认）"
-#: builtin/grep.c:679
+#: builtin/grep.c:1017
msgid "interpret patterns as fixed strings"
msgstr "把模式解析为固定的字符串"
-#: builtin/grep.c:682
+#: builtin/grep.c:1020
msgid "use Perl-compatible regular expressions"
msgstr "使用 Perl 兼容的正则表达式"
-#: builtin/grep.c:685
+#: builtin/grep.c:1023
msgid "show line numbers"
msgstr "显示行号"
-#: builtin/grep.c:686
+#: builtin/grep.c:1024
msgid "don't show filenames"
msgstr "不显示文件名"
-#: builtin/grep.c:687
+#: builtin/grep.c:1025
msgid "show filenames"
msgstr "显示文件名"
-#: builtin/grep.c:689
+#: builtin/grep.c:1027
msgid "show filenames relative to top directory"
msgstr "显示相对于顶级目录的文件名"
-#: builtin/grep.c:691
+#: builtin/grep.c:1029
msgid "show only filenames instead of matching lines"
msgstr "只显示文件名而不显示匹配的行"
-#: builtin/grep.c:693
+#: builtin/grep.c:1031
msgid "synonym for --files-with-matches"
msgstr "和 --files-with-matches 同义"
-#: builtin/grep.c:696
+#: builtin/grep.c:1034
msgid "show only the names of files without match"
msgstr "只显示未匹配的文件名"
-#: builtin/grep.c:698
+#: builtin/grep.c:1036
msgid "print NUL after filenames"
msgstr "在文件名后输出 NUL 字符"
-#: builtin/grep.c:700
+#: builtin/grep.c:1038
msgid "show the number of matches instead of matching lines"
msgstr "显示总匹配行数，而不显示匹配的行"
-#: builtin/grep.c:701
+#: builtin/grep.c:1039
msgid "highlight matches"
msgstr "高亮显示匹配项"
-#: builtin/grep.c:703
+#: builtin/grep.c:1041
msgid "print empty line between matches from different files"
msgstr "在不同文件的匹配项之间打印空行"
-#: builtin/grep.c:705
+#: builtin/grep.c:1043
msgid "show filename only once above matches from same file"
msgstr "只在同一文件的匹配项的上面显示一次文件名"
-#: builtin/grep.c:708
+#: builtin/grep.c:1046
msgid "show <n> context lines before and after matches"
msgstr "显示匹配项前后的 <n> 行上下文"
-#: builtin/grep.c:711
+#: builtin/grep.c:1049
msgid "show <n> context lines before matches"
msgstr "显示匹配项前 <n> 行上下文"
-#: builtin/grep.c:713
+#: builtin/grep.c:1051
msgid "show <n> context lines after matches"
msgstr "显示匹配项后 <n> 行上下文"
-#: builtin/grep.c:715
+#: builtin/grep.c:1053
msgid "use <n> worker threads"
msgstr "使用 <n> 个工作线程"
-#: builtin/grep.c:716
+#: builtin/grep.c:1054
msgid "shortcut for -C NUM"
msgstr "快捷键 -C 数字"
-#: builtin/grep.c:719
+#: builtin/grep.c:1057
msgid "show a line with the function name before matches"
msgstr "在匹配的前面显示一行函数名"
-#: builtin/grep.c:721
+#: builtin/grep.c:1059
msgid "show the surrounding function"
msgstr "显示所在函数的前后内容"
-#: builtin/grep.c:724
+#: builtin/grep.c:1062
msgid "read patterns from file"
msgstr "从文件读取模式"
-#: builtin/grep.c:726
+#: builtin/grep.c:1064
msgid "match <pattern>"
msgstr "匹配 <模式>"
-#: builtin/grep.c:728
+#: builtin/grep.c:1066
msgid "combine patterns specified with -e"
msgstr "组合用 -e 参数设定的模式"
-#: builtin/grep.c:740
+#: builtin/grep.c:1078
msgid "indicate hit with exit status without output"
msgstr "不输出，而用退出码标识命中状态"
-#: builtin/grep.c:742
+#: builtin/grep.c:1080
msgid "show only matches from files that match all patterns"
msgstr "只显示匹配所有模式的文件中的匹配"
-#: builtin/grep.c:744
+#: builtin/grep.c:1082
msgid "show parse tree for grep expression"
msgstr "显示 grep 表达式的解析树"
-#: builtin/grep.c:748
+#: builtin/grep.c:1086
msgid "pager"
msgstr "分页"
-#: builtin/grep.c:748
+#: builtin/grep.c:1086
msgid "show matching files in the pager"
msgstr "分页显示匹配的文件"
-#: builtin/grep.c:751
+#: builtin/grep.c:1089
msgid "allow calling of grep(1) (ignored by this build)"
msgstr "允许调用 grep(1)（本次构建忽略）"
-#: builtin/grep.c:814
+#: builtin/grep.c:1153
msgid "no pattern given."
msgstr "未提供模式匹配。"
-#: builtin/grep.c:846 builtin/index-pack.c:1480
+#: builtin/grep.c:1189
+msgid "--no-index or --untracked cannot be used with revs"
+msgstr "--no-index 或 --untracked 不能和版本同时使用"
+
+#: builtin/grep.c:1195
+#, c-format
+msgid "unable to resolve revision: %s"
+msgstr "不能解析版本：%s"
+
+#: builtin/grep.c:1228 builtin/index-pack.c:1485
#, c-format
msgid "invalid number of threads specified (%d)"
msgstr "指定的线程数无效（%d）"
-#: builtin/grep.c:876
+#: builtin/grep.c:1251
msgid "--open-files-in-pager only works on the worktree"
msgstr "--open-files-in-pager 仅用于工作区"
-#: builtin/grep.c:902
+#: builtin/grep.c:1274
+msgid "option not supported with --recurse-submodules."
+msgstr "选项不支持和 --recurse-submodules 共用。"
+
+#: builtin/grep.c:1280
msgid "--cached or --untracked cannot be used with --no-index."
msgstr "--cached 或 --untracked 不能与 --no-index 同时使用。"
-#: builtin/grep.c:907
-msgid "--no-index or --untracked cannot be used with revs."
-msgstr "--no-index 或 --untracked 不能和版本同时使用。"
-
-#: builtin/grep.c:910
+#: builtin/grep.c:1286
msgid "--[no-]exclude-standard cannot be used for tracked contents."
msgstr "--[no-]exclude-standard 不能用于已跟踪内容。"
-#: builtin/grep.c:918
+#: builtin/grep.c:1294
msgid "both --cached and trees are given."
msgstr "同时给出了 --cached 和树对象。"
msgid "unable to create '%s'"
msgstr "不能创建 '%s'"
-#: builtin/index-pack.c:322
+#: builtin/index-pack.c:323
#, c-format
msgid "cannot open packfile '%s'"
msgstr "无法打开包文件 '%s'"
-#: builtin/index-pack.c:336
+#: builtin/index-pack.c:337
msgid "pack signature mismatch"
msgstr "包签名不匹配"
-#: builtin/index-pack.c:338
+#: builtin/index-pack.c:339
#, c-format
msgid "pack version %<PRIu32> unsupported"
msgstr "不支持包版本 %<PRIu32>"
-#: builtin/index-pack.c:356
+#: builtin/index-pack.c:357
#, c-format
msgid "pack has bad object at offset %<PRIuMAX>: %s"
msgstr "包中有错误的对象位于偏移量 %<PRIuMAX>：%s"
-#: builtin/index-pack.c:478
+#: builtin/index-pack.c:479
#, c-format
msgid "inflate returned %d"
msgstr "解压缩返回 %d"
-#: builtin/index-pack.c:527
+#: builtin/index-pack.c:528
msgid "offset value overflow for delta base object"
msgstr "偏移值覆盖了 delta 基准对象"
-#: builtin/index-pack.c:535
+#: builtin/index-pack.c:536
msgid "delta base offset is out of bound"
msgstr "delta 基准偏移越界"
-#: builtin/index-pack.c:543
+#: builtin/index-pack.c:544
#, c-format
msgid "unknown object type %d"
msgstr "未知对象类型 %d"
-#: builtin/index-pack.c:574
+#: builtin/index-pack.c:575
msgid "cannot pread pack file"
msgstr "无法读取包文件"
-#: builtin/index-pack.c:576
+#: builtin/index-pack.c:577
#, c-format
msgid "premature end of pack file, %<PRIuMAX> byte missing"
msgid_plural "premature end of pack file, %<PRIuMAX> bytes missing"
msgstr[0] "包文件过早结束，缺少 %<PRIuMAX> 字节"
msgstr[1] "包文件过早结束，缺少 %<PRIuMAX> 字节"
-#: builtin/index-pack.c:602
+#: builtin/index-pack.c:603
msgid "serious inflate inconsistency"
msgstr "解压缩严重的不一致"
-#: builtin/index-pack.c:748 builtin/index-pack.c:754 builtin/index-pack.c:777
-#: builtin/index-pack.c:811 builtin/index-pack.c:820
+#: builtin/index-pack.c:749 builtin/index-pack.c:755 builtin/index-pack.c:778
+#: builtin/index-pack.c:816 builtin/index-pack.c:825
#, c-format
msgid "SHA1 COLLISION FOUND WITH %s !"
msgstr "发现 %s 出现 SHA1 冲突！"
-#: builtin/index-pack.c:751 builtin/pack-objects.c:166
-#: builtin/pack-objects.c:258
+#: builtin/index-pack.c:752 builtin/pack-objects.c:164
+#: builtin/pack-objects.c:257
#, c-format
msgid "unable to read %s"
msgstr "不能读 %s"
-#: builtin/index-pack.c:817
+#: builtin/index-pack.c:814
+#, c-format
+msgid "cannot read existing object info %s"
+msgstr "不能读取现存对象信息 %s"
+
+#: builtin/index-pack.c:822
#, c-format
msgid "cannot read existing object %s"
msgstr "不能读取现存对象 %s"
-#: builtin/index-pack.c:831
+#: builtin/index-pack.c:836
#, c-format
msgid "invalid blob object %s"
msgstr "无效的数据对象 %s"
-#: builtin/index-pack.c:845
+#: builtin/index-pack.c:850
#, c-format
msgid "invalid %s"
msgstr "无效的 %s"
-#: builtin/index-pack.c:848
+#: builtin/index-pack.c:853
msgid "Error in object"
msgstr "对象中出错"
-#: builtin/index-pack.c:850
+#: builtin/index-pack.c:855
#, c-format
msgid "Not all child objects of %s are reachable"
msgstr "%s 的所有子对象并非都可达"
-#: builtin/index-pack.c:922 builtin/index-pack.c:953
+#: builtin/index-pack.c:927 builtin/index-pack.c:958
msgid "failed to apply delta"
msgstr "无法应用 delta"
-#: builtin/index-pack.c:1123
+#: builtin/index-pack.c:1128
msgid "Receiving objects"
msgstr "接收对象中"
-#: builtin/index-pack.c:1123
+#: builtin/index-pack.c:1128
msgid "Indexing objects"
msgstr "索引对象中"
-#: builtin/index-pack.c:1155
+#: builtin/index-pack.c:1160
msgid "pack is corrupted (SHA1 mismatch)"
msgstr "包冲突（SHA1 不匹配）"
-#: builtin/index-pack.c:1160
+#: builtin/index-pack.c:1165
msgid "cannot fstat packfile"
-msgstr "不能枚举包文件状态"
+msgstr "不能对包文件调用 fstat"
-#: builtin/index-pack.c:1163
+#: builtin/index-pack.c:1168
msgid "pack has junk at the end"
msgstr "包的结尾有垃圾数据"
-#: builtin/index-pack.c:1174
+#: builtin/index-pack.c:1179
msgid "confusion beyond insanity in parse_pack_objects()"
msgstr "parse_pack_objects() 中遇到不可理喻的问题"
-#: builtin/index-pack.c:1197
+#: builtin/index-pack.c:1202
msgid "Resolving deltas"
msgstr "处理 delta 中"
-#: builtin/index-pack.c:1208
+#: builtin/index-pack.c:1213
#, c-format
msgid "unable to create thread: %s"
msgstr "不能创建线程：%s"
-#: builtin/index-pack.c:1250
+#: builtin/index-pack.c:1255
msgid "confusion beyond insanity"
msgstr "不可理喻"
-#: builtin/index-pack.c:1256
+#: builtin/index-pack.c:1261
#, c-format
msgid "completed with %d local object"
msgid_plural "completed with %d local objects"
msgstr[0] "完成 %d 个本地对象"
msgstr[1] "完成 %d 个本地对象"
-#: builtin/index-pack.c:1268
+#: builtin/index-pack.c:1273
#, c-format
msgid "Unexpected tail checksum for %s (disk corruption?)"
msgstr "对 %s 的尾部校验出现意外（磁盘损坏？）"
-#: builtin/index-pack.c:1272
+#: builtin/index-pack.c:1277
#, c-format
msgid "pack has %d unresolved delta"
msgid_plural "pack has %d unresolved deltas"
msgstr[0] "包有 %d 个未解决的 delta"
msgstr[1] "包有 %d 个未解决的 delta"
-#: builtin/index-pack.c:1296
+#: builtin/index-pack.c:1301
#, c-format
msgid "unable to deflate appended object (%d)"
msgstr "不能压缩附加对象（%d）"
-#: builtin/index-pack.c:1372
+#: builtin/index-pack.c:1377
#, c-format
msgid "local object %s is corrupt"
msgstr "本地对象 %s 已损坏"
-#: builtin/index-pack.c:1396
+#: builtin/index-pack.c:1403
msgid "error while closing pack file"
msgstr "关闭包文件时出错"
-#: builtin/index-pack.c:1409
+#: builtin/index-pack.c:1415
#, c-format
msgid "cannot write keep file '%s'"
msgstr "无法写保留文件 '%s'"
-#: builtin/index-pack.c:1417
+#: builtin/index-pack.c:1423
#, c-format
msgid "cannot close written keep file '%s'"
msgstr "无法关闭保留文件 '%s'"
-#: builtin/index-pack.c:1430
+#: builtin/index-pack.c:1433
msgid "cannot store pack file"
msgstr "无法存储包文件"
msgid "cannot store index file"
msgstr "无法存储索引文件"
-#: builtin/index-pack.c:1474
+#: builtin/index-pack.c:1479
#, c-format
msgid "bad pack.indexversion=%<PRIu32>"
msgstr "坏的 pack.indexversion=%<PRIu32>"
-#: builtin/index-pack.c:1484 builtin/index-pack.c:1681
+#: builtin/index-pack.c:1489 builtin/index-pack.c:1686
#, c-format
msgid "no threads support, ignoring %s"
msgstr "没有线程支持，忽略 %s"
-#: builtin/index-pack.c:1542
+#: builtin/index-pack.c:1547
#, c-format
msgid "Cannot open existing pack file '%s'"
msgstr "无法打开现存包文件 '%s'"
-#: builtin/index-pack.c:1544
+#: builtin/index-pack.c:1549
#, c-format
msgid "Cannot open existing pack idx file for '%s'"
msgstr "无法为 %s 打开包索引文件"
-#: builtin/index-pack.c:1591
+#: builtin/index-pack.c:1596
#, c-format
msgid "non delta: %d object"
msgid_plural "non delta: %d objects"
msgstr[0] "非 delta：%d 个对象"
msgstr[1] "非 delta：%d 个对象"
-#: builtin/index-pack.c:1598
+#: builtin/index-pack.c:1603
#, c-format
msgid "chain length = %d: %lu object"
msgid_plural "chain length = %d: %lu objects"
msgstr[0] "链长 = %d: %lu 对象"
msgstr[1] "链长 = %d: %lu 对象"
-#: builtin/index-pack.c:1611
+#: builtin/index-pack.c:1616
#, c-format
msgid "packfile name '%s' does not end with '.pack'"
msgstr "包文件名 '%s' 没有以 '.pack' 结尾"
-#: builtin/index-pack.c:1693 builtin/index-pack.c:1696
-#: builtin/index-pack.c:1712 builtin/index-pack.c:1716
+#: builtin/index-pack.c:1698 builtin/index-pack.c:1701
+#: builtin/index-pack.c:1717 builtin/index-pack.c:1721
#, c-format
msgid "bad %s"
msgstr "错误选项 %s"
-#: builtin/index-pack.c:1732
+#: builtin/index-pack.c:1737
msgid "--fix-thin cannot be used without --stdin"
msgstr "--fix-thin 不能和 --stdin 同时使用"
-#: builtin/index-pack.c:1740
+#: builtin/index-pack.c:1739
+msgid "--stdin requires a git repository"
+msgstr "--stdin 需要一个 git 仓库"
+
+#: builtin/index-pack.c:1747
msgid "--verify with no packfile name given"
msgstr "--verify 没有提供包文件名参数"
#: builtin/init-db.c:54
#, c-format
msgid "cannot stat '%s'"
-msgstr "不能枚举 '%s' 状态"
+msgstr "不能对 '%s' 调用 stat"
#: builtin/init-db.c:60
#, c-format
msgid "cannot stat template '%s'"
-msgstr "不能枚举模版 '%s' 状态"
+msgstr "不能对模版 '%s' 调用 stat"
#: builtin/init-db.c:65
#, c-format
msgid "git show [<options>] <object>..."
msgstr "git show [<选项>] <对象>..."
-#: builtin/log.c:84
+#: builtin/log.c:89
#, c-format
msgid "invalid --decorate option: %s"
msgstr "无效的 --decorate 选项：%s"
-#: builtin/log.c:139
+#: builtin/log.c:144
msgid "suppress diff output"
msgstr "不显示差异输出"
-#: builtin/log.c:140
+#: builtin/log.c:145
msgid "show source"
msgstr "显示源"
-#: builtin/log.c:141
+#: builtin/log.c:146
msgid "Use mail map file"
msgstr "使用邮件映射文件"
-#: builtin/log.c:142
+#: builtin/log.c:147
msgid "decorate options"
msgstr "修饰选项"
-#: builtin/log.c:145
+#: builtin/log.c:150
msgid "Process line range n,m in file, counting from 1"
msgstr "处理文件中第 n 到 m 之间的行，从 1 开始"
-#: builtin/log.c:241
+#: builtin/log.c:246
#, c-format
msgid "Final output: %d %s\n"
msgstr "最终输出：%d %s\n"
-#: builtin/log.c:486
+#: builtin/log.c:493
#, c-format
msgid "git show %s: bad file"
msgstr "git show %s: 损坏的文件"
-#: builtin/log.c:500 builtin/log.c:594
+#: builtin/log.c:507 builtin/log.c:601
#, c-format
msgid "Could not read object %s"
msgstr "不能读取对象 %s"
-#: builtin/log.c:618
+#: builtin/log.c:625
#, c-format
msgid "Unknown type: %d"
msgstr "未知类型：%d"
-#: builtin/log.c:739
+#: builtin/log.c:746
msgid "format.headers without value"
msgstr "format.headers 没有值"
-#: builtin/log.c:839
+#: builtin/log.c:846
msgid "name of output directory is too long"
msgstr "输出目录名太长"
-#: builtin/log.c:854
+#: builtin/log.c:861
#, c-format
msgid "Cannot open patch file %s"
msgstr "无法打开补丁文件 %s"
-#: builtin/log.c:868
+#: builtin/log.c:875
msgid "Need exactly one range."
msgstr "只需要一个范围。"
-#: builtin/log.c:878
+#: builtin/log.c:885
msgid "Not a range."
msgstr "不是一个范围。"
-#: builtin/log.c:984
+#: builtin/log.c:991
msgid "Cover letter needs email format"
msgstr "信封需要邮件地址格式"
-#: builtin/log.c:1063
+#: builtin/log.c:1071
#, c-format
msgid "insane in-reply-to: %s"
msgstr "不正常的 in-reply-to：%s"
-#: builtin/log.c:1091
+#: builtin/log.c:1098
msgid "git format-patch [<options>] [<since> | <revision-range>]"
msgstr "git format-patch [<选项>] [<从> | <版本范围>]"
-#: builtin/log.c:1141
+#: builtin/log.c:1148
msgid "Two output directories?"
msgstr "两个输出目录？"
-#: builtin/log.c:1248 builtin/log.c:1891 builtin/log.c:1893 builtin/log.c:1905
+#: builtin/log.c:1255 builtin/log.c:1898 builtin/log.c:1900 builtin/log.c:1912
#, c-format
msgid "Unknown commit %s"
msgstr "未知提交 %s"
-#: builtin/log.c:1258 builtin/notes.c:884 builtin/tag.c:455
+#: builtin/log.c:1265 builtin/notes.c:883 builtin/tag.c:532
#, c-format
msgid "Failed to resolve '%s' as a valid ref."
msgstr "无法解析 '%s' 为一个有效引用。"
-#: builtin/log.c:1263
+#: builtin/log.c:1270
msgid "Could not find exact merge base."
msgstr "不能找到准确的合并基线。"
-#: builtin/log.c:1267
+#: builtin/log.c:1274
msgid ""
"Failed to get upstream, if you want to record base commit automatically,\n"
"please use git branch --set-upstream-to to track a remote branch.\n"
"git branch --set-upstream-to 来跟踪一个远程分支。或者你可以通过\n"
"参数 --base=<base-commit-id> 手动指定一个基线提交。"
-#: builtin/log.c:1287
+#: builtin/log.c:1294
msgid "Failed to find exact merge base"
msgstr "无法找到准确的合并基线"
-#: builtin/log.c:1298
+#: builtin/log.c:1305
msgid "base commit should be the ancestor of revision list"
msgstr "基线提交应该是版本列表的祖先"
-#: builtin/log.c:1302
+#: builtin/log.c:1309
msgid "base commit shouldn't be in revision list"
msgstr "基线提交不应该出现在版本列表中"
-#: builtin/log.c:1351
+#: builtin/log.c:1358
msgid "cannot get patch id"
msgstr "无法得到补丁 id"
-#: builtin/log.c:1408
+#: builtin/log.c:1415
msgid "use [PATCH n/m] even with a single patch"
msgstr "使用 [PATCH n/m]，即使只有一个补丁"
-#: builtin/log.c:1411
+#: builtin/log.c:1418
msgid "use [PATCH] even with multiple patches"
msgstr "使用 [PATCH]，即使有多个补丁"
-#: builtin/log.c:1415
+#: builtin/log.c:1422
msgid "print patches to standard out"
msgstr "打印补丁到标准输出"
-#: builtin/log.c:1417
+#: builtin/log.c:1424
msgid "generate a cover letter"
msgstr "生成一封附信"
-#: builtin/log.c:1419
+#: builtin/log.c:1426
msgid "use simple number sequence for output file names"
msgstr "使用简单的数字序列作为输出文件名"
-#: builtin/log.c:1420
+#: builtin/log.c:1427
msgid "sfx"
msgstr "后缀"
-#: builtin/log.c:1421
+#: builtin/log.c:1428
msgid "use <sfx> instead of '.patch'"
msgstr "使用 <后缀> 代替 '.patch'"
-#: builtin/log.c:1423
+#: builtin/log.c:1430
msgid "start numbering patches at <n> instead of 1"
msgstr "补丁以 <n> 开始编号，而不是1"
-#: builtin/log.c:1425
+#: builtin/log.c:1432
msgid "mark the series as Nth re-roll"
msgstr "标记补丁系列是第几次重制"
-#: builtin/log.c:1427
+#: builtin/log.c:1434
msgid "Use [RFC PATCH] instead of [PATCH]"
msgstr "使用 [RFC PATCH] 代替 [PATCH]"
-#: builtin/log.c:1430
+#: builtin/log.c:1437
msgid "Use [<prefix>] instead of [PATCH]"
msgstr "使用 [<前缀>] 代替 [PATCH]"
-#: builtin/log.c:1433
+#: builtin/log.c:1440
msgid "store resulting files in <dir>"
msgstr "把结果文件存储在 <目录>"
-#: builtin/log.c:1436
+#: builtin/log.c:1443
msgid "don't strip/add [PATCH]"
msgstr "不删除/添加 [PATCH]"
-#: builtin/log.c:1439
+#: builtin/log.c:1446
msgid "don't output binary diffs"
msgstr "不输出二进制差异"
-#: builtin/log.c:1441
+#: builtin/log.c:1448
msgid "output all-zero hash in From header"
msgstr "在 From 头信息中输出全为零的哈希值"
-#: builtin/log.c:1443
+#: builtin/log.c:1450
msgid "don't include a patch matching a commit upstream"
msgstr "不包含已在上游提交中的补丁"
-#: builtin/log.c:1445
+#: builtin/log.c:1452
msgid "show patch format instead of default (patch + stat)"
msgstr "显示纯补丁格式而非默认的（补丁+状态）"
-#: builtin/log.c:1447
+#: builtin/log.c:1454
msgid "Messaging"
msgstr "邮件发送"
-#: builtin/log.c:1448
+#: builtin/log.c:1455
msgid "header"
msgstr "header"
-#: builtin/log.c:1449
+#: builtin/log.c:1456
msgid "add email header"
msgstr "添加邮件头"
-#: builtin/log.c:1450 builtin/log.c:1452
+#: builtin/log.c:1457 builtin/log.c:1459
msgid "email"
msgstr "邮件地址"
-#: builtin/log.c:1450
+#: builtin/log.c:1457
msgid "add To: header"
msgstr "添加收件人"
-#: builtin/log.c:1452
+#: builtin/log.c:1459
msgid "add Cc: header"
msgstr "添加抄送"
-#: builtin/log.c:1454
+#: builtin/log.c:1461
msgid "ident"
msgstr "标识"
-#: builtin/log.c:1455
+#: builtin/log.c:1462
msgid "set From address to <ident> (or committer ident if absent)"
msgstr "将 From 地址设置为 <标识>（如若不提供，则用提交者 ID 做为地址）"
-#: builtin/log.c:1457
+#: builtin/log.c:1464
msgid "message-id"
msgstr "邮件标识"
-#: builtin/log.c:1458
+#: builtin/log.c:1465
msgid "make first mail a reply to <message-id>"
msgstr "使第一封邮件作为对 <邮件标识> 的回复"
-#: builtin/log.c:1459 builtin/log.c:1462
+#: builtin/log.c:1466 builtin/log.c:1469
msgid "boundary"
msgstr "边界"
-#: builtin/log.c:1460
+#: builtin/log.c:1467
msgid "attach the patch"
msgstr "附件方式添加补丁"
-#: builtin/log.c:1463
+#: builtin/log.c:1470
msgid "inline the patch"
msgstr "内联显示补丁"
-#: builtin/log.c:1467
+#: builtin/log.c:1474
msgid "enable message threading, styles: shallow, deep"
msgstr "启用邮件线索，风格：浅，深"
-#: builtin/log.c:1469
+#: builtin/log.c:1476
msgid "signature"
msgstr "签名"
-#: builtin/log.c:1470
+#: builtin/log.c:1477
msgid "add a signature"
msgstr "添加一个签名"
-#: builtin/log.c:1471
+#: builtin/log.c:1478
msgid "base-commit"
msgstr "基线提交"
-#: builtin/log.c:1472
+#: builtin/log.c:1479
msgid "add prerequisite tree info to the patch series"
msgstr "为补丁列表添加前置树信息"
-#: builtin/log.c:1474
+#: builtin/log.c:1481
msgid "add a signature from a file"
msgstr "从文件添加一个签名"
-#: builtin/log.c:1475
+#: builtin/log.c:1482
msgid "don't print the patch filenames"
msgstr "不要打印补丁文件名"
-#: builtin/log.c:1565
+#: builtin/log.c:1572
msgid "-n and -k are mutually exclusive."
msgstr "-n 和 -k 互斥。"
-#: builtin/log.c:1567
+#: builtin/log.c:1574
msgid "--subject-prefix/--rfc and -k are mutually exclusive."
msgstr "--subject-prefix/--rfc 和 -k 互斥。"
-#: builtin/log.c:1575
+#: builtin/log.c:1582
msgid "--name-only does not make sense"
msgstr "--name-only 无意义"
-#: builtin/log.c:1577
+#: builtin/log.c:1584
msgid "--name-status does not make sense"
msgstr "--name-status 无意义"
-#: builtin/log.c:1579
+#: builtin/log.c:1586
msgid "--check does not make sense"
msgstr "--check 无意义"
-#: builtin/log.c:1609
+#: builtin/log.c:1616
msgid "standard output, or directory, which one?"
msgstr "标准输出或目录，哪一个？"
-#: builtin/log.c:1611
+#: builtin/log.c:1618
#, c-format
msgid "Could not create directory '%s'"
msgstr "不能创建目录 '%s'"
-#: builtin/log.c:1705
+#: builtin/log.c:1712
#, c-format
msgid "unable to read signature file '%s'"
msgstr "无法读取签名文件 '%s'"
-#: builtin/log.c:1777
+#: builtin/log.c:1784
msgid "Failed to create output files"
msgstr "无法创建输出文件"
-#: builtin/log.c:1826
+#: builtin/log.c:1833
msgid "git cherry [-v] [<upstream> [<head> [<limit>]]]"
msgstr "git cherry [-v] [<上游> [<头> [<限制>]]]"
-#: builtin/log.c:1880
+#: builtin/log.c:1887
#, c-format
msgid ""
"Could not find a tracked remote branch, please specify <upstream> manually.\n"
msgstr "不能找到跟踪的远程分支，请手工指定 <上游>。\n"
-#: builtin/ls-files.c:458
+#: builtin/ls-files.c:468
msgid "git ls-files [<options>] [<file>...]"
msgstr "git ls-files [<选项>] [<文件>...]"
-#: builtin/ls-files.c:507
+#: builtin/ls-files.c:517
msgid "identify the file status with tags"
msgstr "用标签标识文件的状态"
-#: builtin/ls-files.c:509
+#: builtin/ls-files.c:519
msgid "use lowercase letters for 'assume unchanged' files"
msgstr "使用小写字母表示 '假设未改变的' 文件"
-#: builtin/ls-files.c:511
+#: builtin/ls-files.c:521
msgid "show cached files in the output (default)"
msgstr "显示缓存的文件（默认）"
-#: builtin/ls-files.c:513
+#: builtin/ls-files.c:523
msgid "show deleted files in the output"
msgstr "显示已删除的文件"
-#: builtin/ls-files.c:515
+#: builtin/ls-files.c:525
msgid "show modified files in the output"
msgstr "显示已修改的文件"
-#: builtin/ls-files.c:517
+#: builtin/ls-files.c:527
msgid "show other files in the output"
msgstr "显示其它文件"
-#: builtin/ls-files.c:519
+#: builtin/ls-files.c:529
msgid "show ignored files in the output"
msgstr "显示忽略的文件"
-#: builtin/ls-files.c:522
+#: builtin/ls-files.c:532
msgid "show staged contents' object name in the output"
msgstr "显示暂存区内容的对象名称"
-#: builtin/ls-files.c:524
+#: builtin/ls-files.c:534
msgid "show files on the filesystem that need to be removed"
msgstr "显示文件系统需要删除的文件"
-#: builtin/ls-files.c:526
+#: builtin/ls-files.c:536
msgid "show 'other' directories' names only"
msgstr "只显示“其他”目录的名称"
-#: builtin/ls-files.c:528
+#: builtin/ls-files.c:538
msgid "show line endings of files"
msgstr "显示文件换行符格式"
-#: builtin/ls-files.c:530
+#: builtin/ls-files.c:540
msgid "don't show empty directories"
msgstr "不显示空目录"
-#: builtin/ls-files.c:533
+#: builtin/ls-files.c:543
msgid "show unmerged files in the output"
msgstr "显示未合并的文件"
-#: builtin/ls-files.c:535
+#: builtin/ls-files.c:545
msgid "show resolve-undo information"
msgstr "显示 resolve-undo 信息"
-#: builtin/ls-files.c:537
+#: builtin/ls-files.c:547
msgid "skip files matching pattern"
msgstr "匹配排除文件的模式"
-#: builtin/ls-files.c:540
+#: builtin/ls-files.c:550
msgid "exclude patterns are read from <file>"
msgstr "从 <文件> 中读取排除模式"
-#: builtin/ls-files.c:543
+#: builtin/ls-files.c:553
msgid "read additional per-directory exclude patterns in <file>"
msgstr "从 <文件> 读取额外的每个目录的排除模式"
-#: builtin/ls-files.c:545
+#: builtin/ls-files.c:555
msgid "add the standard git exclusions"
msgstr "添加标准的 git 排除"
-#: builtin/ls-files.c:548
+#: builtin/ls-files.c:558
msgid "make the output relative to the project top directory"
msgstr "显示相对于顶级目录的文件名"
-#: builtin/ls-files.c:551
+#: builtin/ls-files.c:561
msgid "recurse through submodules"
msgstr "在子模组中递归"
-#: builtin/ls-files.c:553
+#: builtin/ls-files.c:563
msgid "if any <file> is not in the index, treat this as an error"
msgstr "如果任何 <文件> 都不在索引区，视为错误"
-#: builtin/ls-files.c:554
+#: builtin/ls-files.c:564
msgid "tree-ish"
msgstr "树或提交"
-#: builtin/ls-files.c:555
+#: builtin/ls-files.c:565
msgid "pretend that paths removed since <tree-ish> are still present"
msgstr "假装自从 <树或提交> 之后删除的路径仍然存在"
-#: builtin/ls-files.c:557
+#: builtin/ls-files.c:567
msgid "show debugging data"
msgstr "显示调试数据"
" [-q | --quiet] [--exit-code] [--get-url]\n"
" [--symref] [<仓库> [<引用>...]]"
-#: builtin/ls-remote.c:50
+#: builtin/ls-remote.c:52
msgid "do not print remote URL"
msgstr "不打印远程 URL"
-#: builtin/ls-remote.c:51 builtin/ls-remote.c:53
+#: builtin/ls-remote.c:53 builtin/ls-remote.c:55
msgid "exec"
msgstr "exec"
-#: builtin/ls-remote.c:52 builtin/ls-remote.c:54
+#: builtin/ls-remote.c:54 builtin/ls-remote.c:56
msgid "path of git-upload-pack on the remote host"
msgstr "远程主机上的 git-upload-pack 路径"
-#: builtin/ls-remote.c:56
+#: builtin/ls-remote.c:58
msgid "limit to tags"
msgstr "仅限于标签"
-#: builtin/ls-remote.c:57
+#: builtin/ls-remote.c:59
msgid "limit to heads"
msgstr "仅限于分支"
-#: builtin/ls-remote.c:58
+#: builtin/ls-remote.c:60
msgid "do not show peeled tags"
msgstr "不显示已解析的标签"
-#: builtin/ls-remote.c:60
+#: builtin/ls-remote.c:62
msgid "take url.<base>.insteadOf into account"
msgstr "参考 url.<base>.insteadOf 设置"
-#: builtin/ls-remote.c:62
+#: builtin/ls-remote.c:64
msgid "exit with exit code 2 if no matching refs are found"
msgstr "若未找到匹配的引用则以退出码2退出"
-#: builtin/ls-remote.c:64
+#: builtin/ls-remote.c:66
msgid "show underlying ref in addition to the object pointed by it"
msgstr "除了显示指向的对象外，显示指向的引用名"
msgid "git ls-tree [<options>] <tree-ish> [<path>...]"
msgstr "git ls-tree [<选项>] <树或提交> [<路径>...]"
-#: builtin/ls-tree.c:128
+#: builtin/ls-tree.c:126
msgid "only show trees"
msgstr "只显示树"
-#: builtin/ls-tree.c:130
+#: builtin/ls-tree.c:128
msgid "recurse into subtrees"
msgstr "递归到子树"
-#: builtin/ls-tree.c:132
+#: builtin/ls-tree.c:130
msgid "show trees when recursing"
msgstr "当递归时显示树"
-#: builtin/ls-tree.c:135
+#: builtin/ls-tree.c:133
msgid "terminate entries with NUL byte"
msgstr "条目以 NUL 字符终止"
-#: builtin/ls-tree.c:136
+#: builtin/ls-tree.c:134
msgid "include object size"
msgstr "包括对象大小"
-#: builtin/ls-tree.c:138 builtin/ls-tree.c:140
+#: builtin/ls-tree.c:136 builtin/ls-tree.c:138
msgid "list only filenames"
msgstr "只列出文件名"
-#: builtin/ls-tree.c:143
+#: builtin/ls-tree.c:141
msgid "use full path names"
msgstr "使用文件的全路径"
-#: builtin/ls-tree.c:145
+#: builtin/ls-tree.c:143
msgid "list entire tree; not just current directory (implies --full-name)"
msgstr "列出整个树；不仅仅当前目录（隐含 --full-name）"
msgstr "git merge [<选项>] [<提交>...]"
#: builtin/merge.c:47
-msgid "git merge [<options>] <msg> HEAD <commit>"
-msgstr "git merge [<选项>] <说明> HEAD <提交>"
-
-#: builtin/merge.c:48
msgid "git merge --abort"
msgstr "git merge --abort"
-#: builtin/merge.c:102
+#: builtin/merge.c:48
+msgid "git merge --continue"
+msgstr "git merge --continue"
+
+#: builtin/merge.c:103
msgid "switch `m' requires a value"
msgstr "开关 `m' 需要一个值"
-#: builtin/merge.c:139
+#: builtin/merge.c:140
#, c-format
msgid "Could not find merge strategy '%s'.\n"
msgstr "不能找到合并策略 '%s'。\n"
-#: builtin/merge.c:140
+#: builtin/merge.c:141
#, c-format
msgid "Available strategies are:"
msgstr "可用的策略有："
-#: builtin/merge.c:145
+#: builtin/merge.c:146
#, c-format
msgid "Available custom strategies are:"
msgstr "可用的自定义策略有："
-#: builtin/merge.c:195 builtin/pull.c:127
+#: builtin/merge.c:196 builtin/pull.c:127
msgid "do not show a diffstat at the end of the merge"
msgstr "在合并的最后不显示差异统计"
-#: builtin/merge.c:198 builtin/pull.c:130
+#: builtin/merge.c:199 builtin/pull.c:130
msgid "show a diffstat at the end of the merge"
msgstr "在合并的最后显示差异统计"
-#: builtin/merge.c:199 builtin/pull.c:133
+#: builtin/merge.c:200 builtin/pull.c:133
msgid "(synonym to --stat)"
msgstr "（和 --stat 同义）"
-#: builtin/merge.c:201 builtin/pull.c:136
+#: builtin/merge.c:202 builtin/pull.c:136
msgid "add (at most <n>) entries from shortlog to merge commit message"
msgstr "在合并提交信息中添加（最多 <n> 条）精简提交记录"
-#: builtin/merge.c:204 builtin/pull.c:139
+#: builtin/merge.c:205 builtin/pull.c:139
msgid "create a single commit instead of doing a merge"
msgstr "创建一个单独的提交而不是做一次合并"
-#: builtin/merge.c:206 builtin/pull.c:142
+#: builtin/merge.c:207 builtin/pull.c:142
msgid "perform a commit if the merge succeeds (default)"
msgstr "如果合并成功，执行一次提交（默认）"
-#: builtin/merge.c:208 builtin/pull.c:145
+#: builtin/merge.c:209 builtin/pull.c:145
msgid "edit message before committing"
msgstr "在提交前编辑提交说明"
-#: builtin/merge.c:209
+#: builtin/merge.c:210
msgid "allow fast-forward (default)"
msgstr "允许快进（默认）"
-#: builtin/merge.c:211 builtin/pull.c:151
+#: builtin/merge.c:212 builtin/pull.c:151
msgid "abort if fast-forward is not possible"
msgstr "如果不能快进就放弃合并"
-#: builtin/merge.c:215 builtin/pull.c:154
+#: builtin/merge.c:216 builtin/pull.c:154
msgid "verify that the named commit has a valid GPG signature"
msgstr "验证指定的提交是否包含一个有效的 GPG 签名"
-#: builtin/merge.c:216 builtin/notes.c:774 builtin/pull.c:158
-#: builtin/revert.c:89
+#: builtin/merge.c:217 builtin/notes.c:773 builtin/pull.c:158
+#: builtin/revert.c:108
msgid "strategy"
msgstr "策略"
-#: builtin/merge.c:217 builtin/pull.c:159
+#: builtin/merge.c:218 builtin/pull.c:159
msgid "merge strategy to use"
msgstr "要使用的合并策略"
-#: builtin/merge.c:218 builtin/pull.c:162
+#: builtin/merge.c:219 builtin/pull.c:162
msgid "option=value"
msgstr "option=value"
-#: builtin/merge.c:219 builtin/pull.c:163
+#: builtin/merge.c:220 builtin/pull.c:163
msgid "option for selected merge strategy"
msgstr "所选的合并策略的选项"
-#: builtin/merge.c:221
+#: builtin/merge.c:222
msgid "merge commit message (for a non-fast-forward merge)"
msgstr "合并的提交说明（针对非快进式合并）"
-#: builtin/merge.c:225
+#: builtin/merge.c:226
msgid "abort the current in-progress merge"
msgstr "放弃当前正在进行的合并"
-#: builtin/merge.c:227 builtin/pull.c:170
+#: builtin/merge.c:228
+msgid "continue the current in-progress merge"
+msgstr "继续当前正在进行的合并"
+
+#: builtin/merge.c:230 builtin/pull.c:170
msgid "allow merging unrelated histories"
msgstr "允许合并不相关的历史"
-#: builtin/merge.c:255
+#: builtin/merge.c:258
msgid "could not run stash."
msgstr "不能进行进度保存。"
-#: builtin/merge.c:260
+#: builtin/merge.c:263
msgid "stash failed"
msgstr "进度保存失败"
-#: builtin/merge.c:265
+#: builtin/merge.c:268
#, c-format
msgid "not a valid object: %s"
msgstr "不是一个有效对象：%s"
-#: builtin/merge.c:284 builtin/merge.c:301
+#: builtin/merge.c:287 builtin/merge.c:304
msgid "read-tree failed"
msgstr "读取树失败"
# 译者：注意保持前导空格
-#: builtin/merge.c:331
+#: builtin/merge.c:334
msgid " (nothing to squash)"
msgstr " （无可压缩）"
-#: builtin/merge.c:342
+#: builtin/merge.c:345
#, c-format
msgid "Squash commit -- not updating HEAD\n"
msgstr "压缩提交 -- 未更新 HEAD\n"
-#: builtin/merge.c:392
+#: builtin/merge.c:395
#, c-format
msgid "No merge message -- not updating HEAD\n"
msgstr "无合并信息 -- 未更新 HEAD\n"
-#: builtin/merge.c:443
+#: builtin/merge.c:446
#, c-format
msgid "'%s' does not point to a commit"
msgstr "'%s' 没有指向一个提交"
-#: builtin/merge.c:533
+#: builtin/merge.c:536
#, c-format
msgid "Bad branch.%s.mergeoptions string: %s"
msgstr "坏的 branch.%s.mergeoptions 字符串：%s"
-#: builtin/merge.c:652
+#: builtin/merge.c:656
msgid "Not handling anything other than two heads merge."
-msgstr "不能处理两个头合并之外的任何操作。"
+msgstr "未处理两个头合并之外的任何操作。"
-#: builtin/merge.c:666
+#: builtin/merge.c:670
#, c-format
msgid "Unknown option for merge-recursive: -X%s"
msgstr "merge-recursive 的未知选项：-X%s"
-#: builtin/merge.c:681
+#: builtin/merge.c:685
#, c-format
msgid "unable to write %s"
msgstr "不能写 %s"
-#: builtin/merge.c:733
+#: builtin/merge.c:737
#, c-format
msgid "Could not read from '%s'"
msgstr "不能从 '%s' 读取"
-#: builtin/merge.c:742
+#: builtin/merge.c:746
#, c-format
msgid "Not committing merge; use 'git commit' to complete the merge.\n"
msgstr "未提交合并，使用 'git commit' 完成此次合并。\n"
-#: builtin/merge.c:748
+#: builtin/merge.c:752
#, c-format
msgid ""
"Please enter a commit message to explain why this merge is necessary,\n"
"\n"
"以 '%c' 开头的行将被忽略，而且空提交说明将会终止提交。\n"
-#: builtin/merge.c:772
+#: builtin/merge.c:776
msgid "Empty commit message."
msgstr "空提交信息。"
-#: builtin/merge.c:792
+#: builtin/merge.c:796
#, c-format
msgid "Wonderful.\n"
msgstr "太棒了。\n"
-#: builtin/merge.c:847
+#: builtin/merge.c:851
#, c-format
msgid "Automatic merge failed; fix conflicts and then commit the result.\n"
msgstr "自动合并失败，修正冲突然后提交修正的结果。\n"
-#: builtin/merge.c:863
-#, c-format
-msgid "'%s' is not a commit"
-msgstr "'%s' 不是一个提交"
-
-#: builtin/merge.c:904
+#: builtin/merge.c:890
msgid "No current branch."
msgstr "没有当前分支。"
-#: builtin/merge.c:906
+#: builtin/merge.c:892
msgid "No remote for the current branch."
msgstr "当前分支没有对应的远程仓库。"
-#: builtin/merge.c:908
+#: builtin/merge.c:894
msgid "No default upstream defined for the current branch."
msgstr "当前分支没有定义默认的上游分支。"
-#: builtin/merge.c:913
+#: builtin/merge.c:899
#, c-format
msgid "No remote-tracking branch for %s from %s"
msgstr "对于 %s 没有来自 %s 的远程跟踪分支"
-#: builtin/merge.c:960
+#: builtin/merge.c:946
#, c-format
msgid "Bad value '%s' in environment '%s'"
msgstr "环境 '%2$s' 中存在坏的取值 '%1$s'"
-#: builtin/merge.c:1034
+#: builtin/merge.c:1020
#, c-format
msgid "could not close '%s'"
msgstr "不能关闭 '%s'"
-#: builtin/merge.c:1061
+#: builtin/merge.c:1047
#, c-format
msgid "not something we can merge in %s: %s"
msgstr "不能在 %s 中合并：%s"
-#: builtin/merge.c:1095
+#: builtin/merge.c:1081
msgid "not something we can merge"
msgstr "不能合并"
-#: builtin/merge.c:1162
+#: builtin/merge.c:1146
+msgid "--abort expects no arguments"
+msgstr "--abort 不带参数"
+
+#: builtin/merge.c:1150
msgid "There is no merge to abort (MERGE_HEAD missing)."
msgstr "没有要终止的合并（MERGE_HEAD 丢失）。"
-#: builtin/merge.c:1178
+#: builtin/merge.c:1162
+msgid "--continue expects no arguments"
+msgstr "--continue 不带参数"
+
+#: builtin/merge.c:1166
+msgid "There is no merge in progress (MERGE_HEAD missing)."
+msgstr "没有进行中的合并（MERGE_HEAD 丢失）。"
+
+#: builtin/merge.c:1182
msgid ""
"You have not concluded your merge (MERGE_HEAD exists).\n"
"Please, commit your changes before you merge."
"您尚未结束您的合并（存在 MERGE_HEAD）。\n"
"请在合并前先提交您的修改。"
-#: builtin/merge.c:1185
+#: builtin/merge.c:1189
msgid ""
"You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n"
"Please, commit your changes before you merge."
"您尚未结束您的拣选（存在 CHERRY_PICK_HEAD）。\n"
"请在合并前先提交您的修改。"
-#: builtin/merge.c:1188
+#: builtin/merge.c:1192
msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)."
msgstr "您尚未结束您的拣选（存在 CHERRY_PICK_HEAD）。"
-#: builtin/merge.c:1197
+#: builtin/merge.c:1201
msgid "You cannot combine --squash with --no-ff."
msgstr "您不能将 --squash 与 --no-ff 同时使用。"
-#: builtin/merge.c:1205
+#: builtin/merge.c:1209
msgid "No commit specified and merge.defaultToUpstream not set."
msgstr "未指定提交并且 merge.defaultToUpstream 未设置。"
-#: builtin/merge.c:1222
+#: builtin/merge.c:1226
msgid "Squash commit into empty head not supported yet"
msgstr "尚不支持到空分支的压缩提交"
-#: builtin/merge.c:1224
+#: builtin/merge.c:1228
msgid "Non-fast-forward commit does not make sense into an empty head"
msgstr "到空分支的非快进式提交没有意义"
-#: builtin/merge.c:1229
+#: builtin/merge.c:1233
#, c-format
msgid "%s - not something we can merge"
msgstr "%s - 不能被合并"
-#: builtin/merge.c:1231
+#: builtin/merge.c:1235
msgid "Can merge only exactly one commit into empty head"
msgstr "只能将一个提交合并到空分支上"
-#: builtin/merge.c:1287
+#: builtin/merge.c:1269
#, c-format
msgid "Commit %s has an untrusted GPG signature, allegedly by %s."
msgstr "提交 %s 有一个非可信的声称来自 %s 的 GPG 签名。"
-#: builtin/merge.c:1290
+#: builtin/merge.c:1272
#, c-format
msgid "Commit %s has a bad GPG signature allegedly by %s."
msgstr "提交 %s 有一个错误的声称来自 %s 的 GPG 签名。"
-#: builtin/merge.c:1293
+#: builtin/merge.c:1275
#, c-format
msgid "Commit %s does not have a GPG signature."
msgstr "提交 %s 没有一个 GPG 签名。"
-#: builtin/merge.c:1296
+#: builtin/merge.c:1278
#, c-format
msgid "Commit %s has a good GPG signature by %s\n"
msgstr "提交 %s 有一个来自 %s 的好的 GPG 签名。\n"
-#: builtin/merge.c:1358
+#: builtin/merge.c:1340
msgid "refusing to merge unrelated histories"
msgstr "拒绝合并无关的历史"
-#: builtin/merge.c:1367
+#: builtin/merge.c:1349
msgid "Already up-to-date."
msgstr "已经是最新的。"
-#: builtin/merge.c:1377
+#: builtin/merge.c:1359
#, c-format
msgid "Updating %s..%s\n"
msgstr "更新 %s..%s\n"
-#: builtin/merge.c:1418
+#: builtin/merge.c:1400
#, c-format
msgid "Trying really trivial in-index merge...\n"
msgstr "尝试非常小的索引内合并...\n"
-#: builtin/merge.c:1425
+#: builtin/merge.c:1407
#, c-format
msgid "Nope.\n"
msgstr "无。\n"
-#: builtin/merge.c:1450
+#: builtin/merge.c:1432
msgid "Already up-to-date. Yeeah!"
msgstr "已经是最新的。耶！"
-#: builtin/merge.c:1456
+#: builtin/merge.c:1438
msgid "Not possible to fast-forward, aborting."
msgstr "无法快进，终止。"
-#: builtin/merge.c:1479 builtin/merge.c:1558
+#: builtin/merge.c:1461 builtin/merge.c:1540
#, c-format
msgid "Rewinding the tree to pristine...\n"
msgstr "将树回滚至原始状态...\n"
-#: builtin/merge.c:1483
+#: builtin/merge.c:1465
#, c-format
msgid "Trying merge strategy %s...\n"
msgstr "尝试合并策略 %s...\n"
-#: builtin/merge.c:1549
+#: builtin/merge.c:1531
#, c-format
msgid "No merge strategy handled the merge.\n"
msgstr "没有合并策略处理此合并。\n"
-#: builtin/merge.c:1551
+#: builtin/merge.c:1533
#, c-format
msgid "Merge with strategy %s failed.\n"
msgstr "使用策略 %s 合并失败。\n"
-#: builtin/merge.c:1560
+#: builtin/merge.c:1542
#, c-format
msgid "Using the %s to prepare resolving by hand.\n"
msgstr "使用 %s 以准备手工解决。\n"
-#: builtin/merge.c:1572
+#: builtin/merge.c:1554
#, c-format
msgid "Automatic merge went well; stopped before committing as requested\n"
msgstr "自动合并进展顺利，按要求在提交前停止\n"
"git merge-file [<选项>] [-L <文件1> [-L <初始> [-L <名字2>]]] <文件1> <初始文"
"件> <文件2>"
-#: builtin/merge-file.c:33
+#: builtin/merge-file.c:32
msgid "send results to standard output"
msgstr "将结果发送到标准输出"
-#: builtin/merge-file.c:34
+#: builtin/merge-file.c:33
msgid "use a diff3 based merge"
msgstr "使用基于 diff3 的合并"
-#: builtin/merge-file.c:35
+#: builtin/merge-file.c:34
msgid "for conflicts, use our version"
msgstr "如果冲突，使用我们的版本"
-#: builtin/merge-file.c:37
+#: builtin/merge-file.c:36
msgid "for conflicts, use their version"
msgstr "如果冲突，使用他们的版本"
-#: builtin/merge-file.c:39
+#: builtin/merge-file.c:38
msgid "for conflicts, use a union version"
msgstr "如果冲突，使用联合版本"
-#: builtin/merge-file.c:42
+#: builtin/merge-file.c:41
msgid "for conflicts, use this marker size"
msgstr "如果冲突，使用指定长度的标记"
-#: builtin/merge-file.c:43
+#: builtin/merge-file.c:42
msgid "do not warn about conflicts"
msgstr "不要警告冲突"
-#: builtin/merge-file.c:45
+#: builtin/merge-file.c:44
msgid "set labels for file1/orig-file/file2"
msgstr "为 文件1/初始文件/文件2 设置标签"
msgid "allow creation of more than one tree"
msgstr "允许创建一个以上的树"
-#: builtin/mv.c:15
+#: builtin/mv.c:16
msgid "git mv [<options>] <source>... <destination>"
msgstr "git mv [<选项>] <源>... <目标>"
-#: builtin/mv.c:70
+#: builtin/mv.c:82
#, c-format
msgid "Directory %s is in index and no submodule?"
msgstr "目录 %s 在索引中并且不是子模组？"
-#: builtin/mv.c:72 builtin/rm.c:317
+#: builtin/mv.c:84 builtin/rm.c:290
msgid "Please stage your changes to .gitmodules or stash them to proceed"
msgstr "请将您的修改暂存到 .gitmodules 中或保存进度后再继续"
-#: builtin/mv.c:90
+#: builtin/mv.c:102
#, c-format
msgid "%.*s is in index"
msgstr "%.*s 在索引中"
-#: builtin/mv.c:112
+#: builtin/mv.c:124
msgid "force move/rename even if target exists"
msgstr "强制移动/重命令，即使目标存在"
-#: builtin/mv.c:113
+#: builtin/mv.c:125
msgid "skip move/rename errors"
msgstr "跳过移动/重命名错误"
-#: builtin/mv.c:155
+#: builtin/mv.c:167
#, c-format
msgid "destination '%s' is not a directory"
msgstr "目标 '%s' 不是一个目录"
-#: builtin/mv.c:166
+#: builtin/mv.c:178
#, c-format
msgid "Checking rename of '%s' to '%s'\n"
msgstr "检查 '%s' 到 '%s' 的重命名\n"
-#: builtin/mv.c:170
+#: builtin/mv.c:182
msgid "bad source"
msgstr "坏的源"
-#: builtin/mv.c:173
+#: builtin/mv.c:185
msgid "can not move directory into itself"
msgstr "不能将目录移动到自身"
-#: builtin/mv.c:176
+#: builtin/mv.c:188
msgid "cannot move directory over file"
msgstr "不能将目录移动到文件"
-#: builtin/mv.c:185
+#: builtin/mv.c:197
msgid "source directory is empty"
msgstr "源目录为空"
-#: builtin/mv.c:210
+#: builtin/mv.c:222
msgid "not under version control"
msgstr "不在版本控制之下"
-#: builtin/mv.c:213
+#: builtin/mv.c:225
msgid "destination exists"
msgstr "目标已存在"
-#: builtin/mv.c:221
+#: builtin/mv.c:233
#, c-format
msgid "overwriting '%s'"
msgstr "覆盖 '%s'"
-#: builtin/mv.c:224
+#: builtin/mv.c:236
msgid "Cannot overwrite"
msgstr "不能覆盖"
-#: builtin/mv.c:227
+#: builtin/mv.c:239
msgid "multiple sources for the same target"
msgstr "同一目标具有多个源"
-#: builtin/mv.c:229
+#: builtin/mv.c:241
msgid "destination directory does not exist"
msgstr "目标目录不存在"
-#: builtin/mv.c:236
+#: builtin/mv.c:248
#, c-format
msgid "%s, source=%s, destination=%s"
msgstr "%s，源=%s，目标=%s"
-#: builtin/mv.c:257
+#: builtin/mv.c:269
#, c-format
msgid "Renaming %s to %s\n"
msgstr "重命名 %s 至 %s\n"
-#: builtin/mv.c:263 builtin/remote.c:710 builtin/repack.c:375
+#: builtin/mv.c:275 builtin/remote.c:710 builtin/repack.c:384
#, c-format
msgid "renaming '%s' failed"
msgstr "重命名 '%s' 失败"
-#: builtin/name-rev.c:257
+#: builtin/name-rev.c:289
msgid "git name-rev [<options>] <commit>..."
msgstr "git name-rev [<选项>] <提交>..."
-#: builtin/name-rev.c:258
+#: builtin/name-rev.c:290
msgid "git name-rev [<options>] --all"
msgstr "git name-rev [<选项>] --all"
-#: builtin/name-rev.c:259
+#: builtin/name-rev.c:291
msgid "git name-rev [<options>] --stdin"
msgstr "git name-rev [<选项>] --stdin"
-#: builtin/name-rev.c:311
+#: builtin/name-rev.c:346
msgid "print only names (no SHA-1)"
msgstr "只打印名称（无 SHA-1）"
-#: builtin/name-rev.c:312
+#: builtin/name-rev.c:347
msgid "only use tags to name the commits"
msgstr "只使用标签来命名提交"
-#: builtin/name-rev.c:314
+#: builtin/name-rev.c:349
msgid "only use refs matching <pattern>"
msgstr "只使用和 <模式> 相匹配的引用"
-#: builtin/name-rev.c:316
+#: builtin/name-rev.c:351
+msgid "ignore refs matching <pattern>"
+msgstr "忽略和 <模式> 相匹配的引用"
+
+#: builtin/name-rev.c:353
msgid "list all commits reachable from all refs"
msgstr "列出可以从所有引用访问的提交"
-#: builtin/name-rev.c:317
+#: builtin/name-rev.c:354
msgid "read from stdin"
msgstr "从标准输入读取"
-#: builtin/name-rev.c:318
+#: builtin/name-rev.c:355
msgid "allow to print `undefined` names (default)"
msgstr "允许打印 `未定义` 的名称（默认）"
-#: builtin/name-rev.c:324
+#: builtin/name-rev.c:361
msgid "dereference tags in the input (internal use)"
msgstr "反向解析输入中的标签（内部使用）"
msgid "the note contents have been left in %s"
msgstr "注解内容被留在 %s 中"
-#: builtin/notes.c:233 builtin/tag.c:439
+#: builtin/notes.c:233 builtin/tag.c:516
#, c-format
msgid "cannot read '%s'"
msgstr "不能读取 '%s'"
-#: builtin/notes.c:235 builtin/tag.c:442
+#: builtin/notes.c:235 builtin/tag.c:519
#, c-format
msgid "could not open or read '%s'"
msgstr "不能打开或读取 '%s'"
#: builtin/notes.c:254 builtin/notes.c:305 builtin/notes.c:307
#: builtin/notes.c:372 builtin/notes.c:427 builtin/notes.c:513
-#: builtin/notes.c:518 builtin/notes.c:596 builtin/notes.c:659
+#: builtin/notes.c:518 builtin/notes.c:596 builtin/notes.c:658
#, c-format
msgid "failed to resolve '%s' as a valid ref."
msgstr "无法解析 '%s' 为一个有效引用。"
msgstr "拒绝向 %2$s（在 refs/notes/ 之外）%1$s注解"
#: builtin/notes.c:365 builtin/notes.c:420 builtin/notes.c:496
-#: builtin/notes.c:508 builtin/notes.c:584 builtin/notes.c:652
-#: builtin/notes.c:802 builtin/notes.c:949 builtin/notes.c:970
+#: builtin/notes.c:508 builtin/notes.c:584 builtin/notes.c:651
+#: builtin/notes.c:801 builtin/notes.c:948 builtin/notes.c:969
msgid "too many parameters"
msgstr "参数太多"
-#: builtin/notes.c:378 builtin/notes.c:665
+#: builtin/notes.c:378 builtin/notes.c:664
#, c-format
msgid "no note found for object %s."
msgstr "未发现对象 %s 的注解。"
msgid "Overwriting existing notes for object %s\n"
msgstr "覆盖对象 %s 现存注解\n"
-#: builtin/notes.c:463 builtin/notes.c:624 builtin/notes.c:889
+#: builtin/notes.c:463 builtin/notes.c:623 builtin/notes.c:888
#, c-format
msgid "Removing note for object %s\n"
msgstr "删除对象 %s 的注解\n"
"子命令 'edit' 的选项 -m/-F/-c/-C 已弃用。\n"
"请换用 'git notes add -f -m/-F/-c/-C'。\n"
-#: builtin/notes.c:685
+#: builtin/notes.c:684
msgid "failed to delete ref NOTES_MERGE_PARTIAL"
msgstr "无法删除引用 NOTES_MERGE_PARTIAL"
-#: builtin/notes.c:687
+#: builtin/notes.c:686
msgid "failed to delete ref NOTES_MERGE_REF"
msgstr "无法删除引用 NOTES_MERGE_REF"
-#: builtin/notes.c:689
+#: builtin/notes.c:688
msgid "failed to remove 'git notes merge' worktree"
msgstr "无法删除 'git notes merge' 工作区"
-#: builtin/notes.c:709
+#: builtin/notes.c:708
msgid "failed to read ref NOTES_MERGE_PARTIAL"
msgstr "无法读取引用 NOTES_MERGE_PARTIAL"
-#: builtin/notes.c:711
+#: builtin/notes.c:710
msgid "could not find commit from NOTES_MERGE_PARTIAL."
msgstr "无法从 NOTES_MERGE_PARTIAL 中找到提交。"
-#: builtin/notes.c:713
+#: builtin/notes.c:712
msgid "could not parse commit from NOTES_MERGE_PARTIAL."
msgstr "无法从 NOTES_MERGE_PARTIAL 中解析提交。"
-#: builtin/notes.c:726
+#: builtin/notes.c:725
msgid "failed to resolve NOTES_MERGE_REF"
msgstr "无法解析 NOTES_MERGE_REF"
-#: builtin/notes.c:729
+#: builtin/notes.c:728
msgid "failed to finalize notes merge"
msgstr "无法完成注解合并"
-#: builtin/notes.c:755
+#: builtin/notes.c:754
#, c-format
msgid "unknown notes merge strategy %s"
msgstr "未知的注解合并策略 %s"
-#: builtin/notes.c:771
+#: builtin/notes.c:770
msgid "General options"
msgstr "通用选项"
-#: builtin/notes.c:773
+#: builtin/notes.c:772
msgid "Merge options"
msgstr "合并选项"
-#: builtin/notes.c:775
+#: builtin/notes.c:774
msgid ""
"resolve notes conflicts using the given strategy (manual/ours/theirs/union/"
"cat_sort_uniq)"
msgstr "使用指定的策略解决注解冲突 (manual/ours/theirs/union/cat_sort_uniq)"
-#: builtin/notes.c:777
+#: builtin/notes.c:776
msgid "Committing unmerged notes"
msgstr "提交未合并的注解"
-#: builtin/notes.c:779
+#: builtin/notes.c:778
msgid "finalize notes merge by committing unmerged notes"
msgstr "通过提交未合并的注解来完成注解合并"
-#: builtin/notes.c:781
+#: builtin/notes.c:780
msgid "Aborting notes merge resolution"
msgstr "中止注解合并的方案"
-#: builtin/notes.c:783
+#: builtin/notes.c:782
msgid "abort notes merge"
msgstr "中止注解合并"
-#: builtin/notes.c:794
+#: builtin/notes.c:793
msgid "cannot mix --commit, --abort or -s/--strategy"
msgstr "不能混用 --commit、--abort 或 -s/--strategy"
-#: builtin/notes.c:799
+#: builtin/notes.c:798
msgid "must specify a notes ref to merge"
msgstr "必须指定一个注解引用来合并"
-#: builtin/notes.c:823
+#: builtin/notes.c:822
#, c-format
msgid "unknown -s/--strategy: %s"
msgstr "未知的 -s/--strategy：%s"
-#: builtin/notes.c:860
+#: builtin/notes.c:859
#, c-format
msgid "a notes merge into %s is already in-progress at %s"
msgstr "位于 %2$s 的一个到 %1$s 中的注解合并正在执行中"
-#: builtin/notes.c:863
+#: builtin/notes.c:862
#, c-format
msgid "failed to store link to current notes ref (%s)"
msgstr "无法存储链接到当前的注解引用（%s）"
-#: builtin/notes.c:865
+#: builtin/notes.c:864
#, c-format
msgid ""
"Automatic notes merge failed. Fix conflicts in %s and commit the result with "
"自动合并说明失败。修改 %s 中的冲突并且使用命令 'git notes merge --commit' 提"
"交结果，或者使用命令 'git notes merge --abort' 终止合并。\n"
-#: builtin/notes.c:887
+#: builtin/notes.c:886
#, c-format
msgid "Object %s has no note\n"
msgstr "对象 %s 没有注解\n"
-#: builtin/notes.c:899
+#: builtin/notes.c:898
msgid "attempt to remove non-existent note is not an error"
msgstr "尝试删除不存在的注解不是一个错误"
-#: builtin/notes.c:902
+#: builtin/notes.c:901
msgid "read object names from the standard input"
msgstr "从标准输入读取对象名称"
-#: builtin/notes.c:940 builtin/prune.c:105 builtin/worktree.c:127
+#: builtin/notes.c:939 builtin/prune.c:105 builtin/worktree.c:127
msgid "do not remove, show only"
msgstr "不删除，只显示"
-#: builtin/notes.c:941
+#: builtin/notes.c:940
msgid "report pruned notes"
msgstr "报告清除的注解"
-#: builtin/notes.c:983
+#: builtin/notes.c:982
msgid "notes-ref"
msgstr "注解引用"
-#: builtin/notes.c:984
+#: builtin/notes.c:983
msgid "use notes from <notes-ref>"
msgstr "从 <注解引用> 使用注解"
-#: builtin/notes.c:1019
+#: builtin/notes.c:1018
#, c-format
msgid "unknown subcommand: %s"
msgstr "未知子命令：%s"
"git pack-objects [<options>...] <base-name> [< <ref-list> | < <object-list>]"
msgstr "git pack-objects [<选项>...] <base-name> [< <引用列表> | < <对象列表>]"
-#: builtin/pack-objects.c:179 builtin/pack-objects.c:182
+#: builtin/pack-objects.c:177 builtin/pack-objects.c:180
#, c-format
msgid "deflate error (%d)"
msgstr "压缩错误 (%d)"
-#: builtin/pack-objects.c:768
+#: builtin/pack-objects.c:770
msgid "disabling bitmap writing, packs are split due to pack.packSizeLimit"
msgstr "禁用 bitmap 写入，因为 pack.packSizeLimit 设置使得包被切分为多个"
-#: builtin/pack-objects.c:781
+#: builtin/pack-objects.c:783
msgid "Writing objects"
msgstr "写入对象中"
-#: builtin/pack-objects.c:1070
+#: builtin/pack-objects.c:1063
msgid "disabling bitmap writing, as some objects are not being packed"
msgstr "禁用 bitmap 写入，因为一些对象将不会被打包"
-#: builtin/pack-objects.c:2346
+#: builtin/pack-objects.c:2426
msgid "Compressing objects"
msgstr "压缩对象中"
-#: builtin/pack-objects.c:2759
+#: builtin/pack-objects.c:2829
#, c-format
msgid "unsupported index version %s"
msgstr "不支持的索引版本 %s"
-#: builtin/pack-objects.c:2763
+#: builtin/pack-objects.c:2833
#, c-format
msgid "bad index version '%s'"
msgstr "坏的索引版本 '%s'"
-#: builtin/pack-objects.c:2793
+#: builtin/pack-objects.c:2863
msgid "do not show progress meter"
msgstr "不显示进度表"
-#: builtin/pack-objects.c:2795
+#: builtin/pack-objects.c:2865
msgid "show progress meter"
msgstr "显示进度表"
-#: builtin/pack-objects.c:2797
+#: builtin/pack-objects.c:2867
msgid "show progress meter during object writing phase"
msgstr "在对象写入阶段显示进度表"
-#: builtin/pack-objects.c:2800
+#: builtin/pack-objects.c:2870
msgid "similar to --all-progress when progress meter is shown"
msgstr "当进度表显示时类似于 --all-progress"
-#: builtin/pack-objects.c:2801
+#: builtin/pack-objects.c:2871
msgid "version[,offset]"
msgstr "版本[,偏移]"
-#: builtin/pack-objects.c:2802
+#: builtin/pack-objects.c:2872
msgid "write the pack index file in the specified idx format version"
msgstr "用指定的 idx 格式版本来写包索引文件"
-#: builtin/pack-objects.c:2805
+#: builtin/pack-objects.c:2875
msgid "maximum size of each output pack file"
msgstr "每个输出包的最大尺寸"
-#: builtin/pack-objects.c:2807
+#: builtin/pack-objects.c:2877
msgid "ignore borrowed objects from alternate object store"
msgstr "忽略从备用对象存储里借用对象"
-#: builtin/pack-objects.c:2809
+#: builtin/pack-objects.c:2879
msgid "ignore packed objects"
msgstr "忽略包对象"
-#: builtin/pack-objects.c:2811
+#: builtin/pack-objects.c:2881
msgid "limit pack window by objects"
msgstr "限制打包窗口的对象数"
-#: builtin/pack-objects.c:2813
+#: builtin/pack-objects.c:2883
msgid "limit pack window by memory in addition to object limit"
msgstr "除对象数量限制外设置打包窗口的内存限制"
-#: builtin/pack-objects.c:2815
+#: builtin/pack-objects.c:2885
msgid "maximum length of delta chain allowed in the resulting pack"
msgstr "打包允许的 delta 链的最大长度"
-#: builtin/pack-objects.c:2817
+#: builtin/pack-objects.c:2887
msgid "reuse existing deltas"
msgstr "重用已存在的 deltas"
-#: builtin/pack-objects.c:2819
+#: builtin/pack-objects.c:2889
msgid "reuse existing objects"
msgstr "重用已存在的对象"
-#: builtin/pack-objects.c:2821
+#: builtin/pack-objects.c:2891
msgid "use OFS_DELTA objects"
msgstr "使用 OFS_DELTA 对象"
-#: builtin/pack-objects.c:2823
+#: builtin/pack-objects.c:2893
msgid "use threads when searching for best delta matches"
msgstr "使用线程查询最佳 delta 匹配"
-#: builtin/pack-objects.c:2825
+#: builtin/pack-objects.c:2895
msgid "do not create an empty pack output"
msgstr "不创建空的包输出"
-#: builtin/pack-objects.c:2827
+#: builtin/pack-objects.c:2897
msgid "read revision arguments from standard input"
msgstr "从标准输入读取版本号参数"
-#: builtin/pack-objects.c:2829
+#: builtin/pack-objects.c:2899
msgid "limit the objects to those that are not yet packed"
msgstr "限制那些尚未打包的对象"
-#: builtin/pack-objects.c:2832
+#: builtin/pack-objects.c:2902
msgid "include objects reachable from any reference"
msgstr "包括可以从任何引用访问到的对象"
-#: builtin/pack-objects.c:2835
+#: builtin/pack-objects.c:2905
msgid "include objects referred by reflog entries"
msgstr "包括被引用日志引用到的对象"
-#: builtin/pack-objects.c:2838
+#: builtin/pack-objects.c:2908
msgid "include objects referred to by the index"
msgstr "包括被索引引用到的对象"
-#: builtin/pack-objects.c:2841
+#: builtin/pack-objects.c:2911
msgid "output pack to stdout"
msgstr "输出包到标准输出"
-#: builtin/pack-objects.c:2843
+#: builtin/pack-objects.c:2913
msgid "include tag objects that refer to objects to be packed"
msgstr "包括那些引用了待打包对象的标签对象"
-#: builtin/pack-objects.c:2845
+#: builtin/pack-objects.c:2915
msgid "keep unreachable objects"
msgstr "维持不可达的对象"
-#: builtin/pack-objects.c:2847
+#: builtin/pack-objects.c:2917
msgid "pack loose unreachable objects"
msgstr "打包松散的不可达对象"
-#: builtin/pack-objects.c:2849
+#: builtin/pack-objects.c:2919
msgid "unpack unreachable objects newer than <time>"
msgstr "将比给定 <时间> 新的无法访问的对象解包"
-#: builtin/pack-objects.c:2852
+#: builtin/pack-objects.c:2922
msgid "create thin packs"
msgstr "创建精简包"
-#: builtin/pack-objects.c:2854
+#: builtin/pack-objects.c:2924
msgid "create packs suitable for shallow fetches"
msgstr "创建适合浅克隆仓库获取的包"
-#: builtin/pack-objects.c:2856
+#: builtin/pack-objects.c:2926
msgid "ignore packs that have companion .keep file"
msgstr "忽略配有 .keep 文件的包"
-#: builtin/pack-objects.c:2858
+#: builtin/pack-objects.c:2928
msgid "pack compression level"
msgstr "打包压缩级别"
-#: builtin/pack-objects.c:2860
+#: builtin/pack-objects.c:2930
msgid "do not hide commits by grafts"
msgstr "显示被嫁接隐藏的提交"
-#: builtin/pack-objects.c:2862
+#: builtin/pack-objects.c:2932
msgid "use a bitmap index if available to speed up counting objects"
msgstr "使用 bitmap 索引（如果有的话）以提高对象计数时的速度"
-#: builtin/pack-objects.c:2864
+#: builtin/pack-objects.c:2934
msgid "write a bitmap index together with the pack index"
msgstr "在建立包索引的同时创建 bitmap 索引"
-#: builtin/pack-objects.c:2993
+#: builtin/pack-objects.c:3061
msgid "Counting objects"
msgstr "对象计数中"
msgid "git prune [-n] [-v] [--expire <time>] [--] [<head>...]"
msgstr "git prune [-n] [-v] [--expire <时间>] [--] [<头>...]"
-#: builtin/prune.c:106 builtin/worktree.c:128
+#: builtin/prune.c:106
msgid "report pruned objects"
msgstr "报告清除的对象"
-#: builtin/prune.c:109 builtin/worktree.c:130
+#: builtin/prune.c:109
msgid "expire objects older than <time>"
msgstr "使早于给定时间的对象过期"
msgid "incorporate changes by rebasing rather than merging"
msgstr "使用变基操作取代合并操作以合入修改"
-#: builtin/pull.c:148 builtin/revert.c:101
+#: builtin/pull.c:148 builtin/rebase--helper.c:18 builtin/revert.c:120
msgid "allow fast-forward"
msgstr "允许快进式"
msgid "<remote>"
msgstr "<远程>"
-#: builtin/pull.c:415 builtin/pull.c:430 builtin/pull.c:435 git-rebase.sh:451
+#: builtin/pull.c:415 builtin/pull.c:430 builtin/pull.c:435 git-rebase.sh:456
#: git-parse-remote.sh:65
msgid "<branch>"
msgstr "<分支>"
"您正推送至远程 '%s'（其并非当前分支 '%s' 的上游），\n"
"而没有告诉我要推送什么、更新哪个远程分支。"
-#: builtin/push.c:242
+#: builtin/push.c:245
msgid ""
"You didn't specify any refspecs to push, and push.default is \"nothing\"."
msgstr "您没有为推送指定任何引用规格，并且 push.default 为 \"nothing\"。"
-#: builtin/push.c:249
+#: builtin/push.c:252
msgid ""
"Updates were rejected because the tip of your current branch is behind\n"
"its remote counterpart. Integrate the remote changes (e.g.\n"
"再次推送前，先与远程变更合并（如 'git pull ...'）。详见\n"
"'git push --help' 中的 'Note about fast-forwards' 小节。"
-#: builtin/push.c:255
+#: builtin/push.c:258
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
"counterpart. Check out this branch and integrate the remote changes\n"
"检出该分支并整合远程变更（如 'git pull ...'），然后再推送。详见\n"
"'git push --help' 中的 'Note about fast-forwards' 小节。"
-#: builtin/push.c:261
+#: builtin/push.c:264
msgid ""
"Updates were rejected because the remote contains work that you do\n"
"not have locally. This is usually caused by another repository pushing\n"
"（如 'git pull ...'）。\n"
"详见 'git push --help' 中的 'Note about fast-forwards' 小节。"
-#: builtin/push.c:268
+#: builtin/push.c:271
msgid "Updates were rejected because the tag already exists in the remote."
msgstr "更新被拒绝，因为该标签在远程已经存在。"
-#: builtin/push.c:271
+#: builtin/push.c:274
msgid ""
"You cannot update a remote ref that points at a non-commit object,\n"
"or update a remote ref to make it point at a non-commit object,\n"
"如果不使用 '--force' 参数，您不能更新一个指向非提交对象的远程引用，\n"
"也不能更新远程引用让其指向一个非提交对象。\n"
-#: builtin/push.c:331
+#: builtin/push.c:334
#, c-format
msgid "Pushing to %s\n"
msgstr "推送到 %s\n"
-#: builtin/push.c:335
+#: builtin/push.c:338
#, c-format
msgid "failed to push some refs to '%s'"
msgstr "无法推送一些引用到 '%s'"
-#: builtin/push.c:366
+#: builtin/push.c:369
#, c-format
msgid "bad repository '%s'"
msgstr "坏的仓库 '%s'"
-#: builtin/push.c:367
+#: builtin/push.c:370
msgid ""
"No configured push destination.\n"
"Either specify the URL from the command-line or configure a remote "
"\n"
" git push <名称>\n"
-#: builtin/push.c:385
+#: builtin/push.c:388
msgid "--all and --tags are incompatible"
msgstr "--all 和 --tags 不兼容"
-#: builtin/push.c:386
+#: builtin/push.c:389
msgid "--all can't be combined with refspecs"
msgstr "--all 不能和引用规格同时使用"
-#: builtin/push.c:391
+#: builtin/push.c:394
msgid "--mirror and --tags are incompatible"
msgstr "--mirror 和 --tags 不兼容"
-#: builtin/push.c:392
+#: builtin/push.c:395
msgid "--mirror can't be combined with refspecs"
msgstr "--mirror 不能和引用规格同时使用"
-#: builtin/push.c:397
+#: builtin/push.c:400
msgid "--all and --mirror are incompatible"
msgstr "--all 和 --mirror 不兼容"
-#: builtin/push.c:515
+#: builtin/push.c:518
msgid "repository"
msgstr "仓库"
-#: builtin/push.c:516 builtin/send-pack.c:161
+#: builtin/push.c:519 builtin/send-pack.c:162
msgid "push all refs"
msgstr "推送所有引用"
-#: builtin/push.c:517 builtin/send-pack.c:163
+#: builtin/push.c:520 builtin/send-pack.c:164
msgid "mirror all refs"
msgstr "镜像所有引用"
-#: builtin/push.c:519
+#: builtin/push.c:522
msgid "delete refs"
msgstr "删除引用"
-#: builtin/push.c:520
+#: builtin/push.c:523
msgid "push tags (can't be used with --all or --mirror)"
msgstr "推送标签（不能使用 --all or --mirror）"
-#: builtin/push.c:523 builtin/send-pack.c:164
+#: builtin/push.c:526 builtin/send-pack.c:165
msgid "force updates"
msgstr "强制更新"
-#: builtin/push.c:525 builtin/send-pack.c:175
+#: builtin/push.c:528 builtin/send-pack.c:179
msgid "refname>:<expect"
msgstr "引用名>:<期望值"
-#: builtin/push.c:526 builtin/send-pack.c:176
+#: builtin/push.c:529 builtin/send-pack.c:180
msgid "require old value of ref to be at this value"
msgstr "要求引用旧的取值为设定值"
-#: builtin/push.c:529
+#: builtin/push.c:532
msgid "control recursive pushing of submodules"
msgstr "控制子模组的递归推送"
-#: builtin/push.c:531 builtin/send-pack.c:169
+#: builtin/push.c:534 builtin/send-pack.c:173
msgid "use thin pack"
msgstr "使用精简打包"
-#: builtin/push.c:532 builtin/push.c:533 builtin/send-pack.c:158
-#: builtin/send-pack.c:159
+#: builtin/push.c:535 builtin/push.c:536 builtin/send-pack.c:159
+#: builtin/send-pack.c:160
msgid "receive pack program"
msgstr "接收包程序"
-#: builtin/push.c:534
+#: builtin/push.c:537
msgid "set upstream for git pull/status"
msgstr "设置 git pull/status 的上游"
-#: builtin/push.c:537
+#: builtin/push.c:540
msgid "prune locally removed refs"
msgstr "清除本地删除的引用"
-#: builtin/push.c:539
+#: builtin/push.c:542
msgid "bypass pre-push hook"
msgstr "绕过 pre-push 钩子"
-#: builtin/push.c:540
+#: builtin/push.c:543
msgid "push missing but relevant tags"
msgstr "推送缺失但有关的标签"
-#: builtin/push.c:543 builtin/send-pack.c:166
+#: builtin/push.c:546 builtin/send-pack.c:167
msgid "GPG sign the push"
msgstr "用 GPG 为推送签名"
-#: builtin/push.c:545 builtin/send-pack.c:170
+#: builtin/push.c:548 builtin/send-pack.c:174
msgid "request atomic transaction on remote side"
msgstr "需要远端支持原子事务"
-#: builtin/push.c:546
+#: builtin/push.c:549 builtin/send-pack.c:170
msgid "server-specific"
msgstr "server-specific"
-#: builtin/push.c:546
+#: builtin/push.c:549 builtin/send-pack.c:171
msgid "option to transmit"
msgstr "传输选项"
-#: builtin/push.c:560
+#: builtin/push.c:563
msgid "--delete is incompatible with --all, --mirror and --tags"
msgstr "--delete 与 --all、--mirror 及 --tags 不兼容"
-#: builtin/push.c:562
+#: builtin/push.c:565
msgid "--delete doesn't make sense without any refs"
msgstr "--delete 未接任何引用没有意义"
-#: builtin/push.c:579
+#: builtin/push.c:584
msgid "push options must not have new line characters"
msgstr "推送选项不能有换行符"
-#: builtin/read-tree.c:37
+#: builtin/read-tree.c:40
msgid ""
"git read-tree [(-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>) "
"[-u [--exclude-per-directory=<gitignore>] | -i]] [--no-sparse-checkout] [--"
"u [--exclude-per-directory=<gitignore>] | -i]] [--no-sparse-checkout] [--"
"index-output=<文件>] (--empty | <树对象1> [<树对象2> [<树对象3>]])"
-#: builtin/read-tree.c:110
+#: builtin/read-tree.c:130
msgid "write resulting index to <file>"
msgstr "将索引结果写入 <文件>"
-#: builtin/read-tree.c:113
+#: builtin/read-tree.c:133
msgid "only empty the index"
msgstr "只是清空索引"
-#: builtin/read-tree.c:115
+#: builtin/read-tree.c:135
msgid "Merging"
msgstr "合并"
-#: builtin/read-tree.c:117
+#: builtin/read-tree.c:137
msgid "perform a merge in addition to a read"
msgstr "读取之余再执行一个合并"
-#: builtin/read-tree.c:119
+#: builtin/read-tree.c:139
msgid "3-way merge if no file level merging required"
msgstr "如果没有文件级合并需要，执行三方合并"
-#: builtin/read-tree.c:121
+#: builtin/read-tree.c:141
msgid "3-way merge in presence of adds and removes"
msgstr "存在添加和删除时，也执行三方合并"
-#: builtin/read-tree.c:123
+#: builtin/read-tree.c:143
msgid "same as -m, but discard unmerged entries"
msgstr "类似于 -m，但丢弃未合并的条目"
-#: builtin/read-tree.c:124
+#: builtin/read-tree.c:144
msgid "<subdirectory>/"
msgstr "<子目录>/"
-#: builtin/read-tree.c:125
+#: builtin/read-tree.c:145
msgid "read the tree into the index under <subdirectory>/"
msgstr "读取树对象到索引的 <子目录>/ 下"
-#: builtin/read-tree.c:128
+#: builtin/read-tree.c:148
msgid "update working tree with merge result"
msgstr "用合并的结果更新工作区"
-#: builtin/read-tree.c:130
+#: builtin/read-tree.c:150
msgid "gitignore"
msgstr "gitignore"
-#: builtin/read-tree.c:131
+#: builtin/read-tree.c:151
msgid "allow explicitly ignored files to be overwritten"
msgstr "允许忽略文件中设定的文件可以被覆盖"
-#: builtin/read-tree.c:134
+#: builtin/read-tree.c:154
msgid "don't check the working tree after merging"
msgstr "合并后不检查工作区"
-#: builtin/read-tree.c:135
+#: builtin/read-tree.c:155
msgid "don't update the index or the work tree"
msgstr "不更新索引区和工作区"
-#: builtin/read-tree.c:137
+#: builtin/read-tree.c:157
msgid "skip applying sparse checkout filter"
msgstr "跳过应用稀疏检出过滤器"
-#: builtin/read-tree.c:139
+#: builtin/read-tree.c:159
msgid "debug unpack-trees"
msgstr "调试 unpack-trees"
-#: builtin/receive-pack.c:26
+#: builtin/rebase--helper.c:7
+msgid "git rebase--helper [<options>]"
+msgstr "git rebase--helper [<选项>]"
+
+#: builtin/rebase--helper.c:19
+msgid "continue rebase"
+msgstr "继续变基"
+
+#: builtin/rebase--helper.c:21
+msgid "abort rebase"
+msgstr "中止变基"
+
+#: builtin/receive-pack.c:27
msgid "git receive-pack <git-dir>"
msgstr "git receive-pack <git-dir>"
-#: builtin/receive-pack.c:793
+#: builtin/receive-pack.c:795
msgid ""
"By default, updating the current branch in a non-bare repository\n"
"is denied, because it will make the index and work tree inconsistent\n"
"with what you pushed, and will require 'git reset --hard' to match\n"
"the work tree to HEAD.\n"
"\n"
-"You can set 'receive.denyCurrentBranch' configuration variable to\n"
-"'ignore' or 'warn' in the remote repository to allow pushing into\n"
+"You can set the 'receive.denyCurrentBranch' configuration variable\n"
+"to 'ignore' or 'warn' in the remote repository to allow pushing into\n"
"its current branch; however, this is not recommended unless you\n"
"arranged to update its work tree to match what you pushed in some\n"
"other way.\n"
"若要屏蔽此信息且保持默认行为，设置 'receive.denyCurrentBranch'\n"
"配置变量为 'refuse'。"
-#: builtin/receive-pack.c:813
+#: builtin/receive-pack.c:815
msgid ""
"By default, deleting the current branch is denied, because the next\n"
"'git clone' won't result in any file checked out, causing confusion.\n"
"To squelch this message, you can set it to 'refuse'."
msgstr ""
"默认禁止删除当前分支，因为下一次 'git clone' 将不会检出任何文件，\n"
-"导致混淆。\n"
+"导致困惑。\n"
"\n"
"您可以在远程仓库中设置 'receive.denyDeleteCurrent' 配置变量为\n"
-"'warn' 或 'ignore' 以允许删除当前分支，显示或者不显示警告。\n"
+"'warn'（显示警告信息）或 'ignore'（忽略警告信息）以允许删除当前分支。\n"
"\n"
"若要屏蔽此信息，您可以设置它为 'refuse'。"
-#: builtin/receive-pack.c:1883
+#: builtin/receive-pack.c:1888
msgid "quiet"
msgstr "静默模式"
-#: builtin/receive-pack.c:1897
+#: builtin/receive-pack.c:1902
msgid "You must specify a directory."
msgstr "您必须指定一个目录。"
msgid "(delete)"
msgstr "（删除）"
-#: builtin/remote.c:622 builtin/remote.c:757 builtin/remote.c:854
+#: builtin/remote.c:622 builtin/remote.c:757 builtin/remote.c:856
#, c-format
msgid "No such remote: %s"
msgstr "没有这样的远程：%s"
msgid "creating '%s' failed"
msgstr "创建 '%s' 失败"
-#: builtin/remote.c:792
+#: builtin/remote.c:794
msgid ""
"Note: A branch outside the refs/remotes/ hierarchy was not removed;\n"
"to delete it, use:"
msgstr[0] "注意：ref/remotes 层级之外的一个分支未被移除。要删除它，使用："
msgstr[1] "注意：ref/remotes 层级之外的一些分支未被移除。要删除它们，使用："
-#: builtin/remote.c:806
+#: builtin/remote.c:808
#, c-format
msgid "Could not remove config section '%s'"
msgstr "不能移除配置小节 '%s'"
-#: builtin/remote.c:907
+#: builtin/remote.c:909
#, c-format
msgid " new (next fetch will store in remotes/%s)"
msgstr " 新的（下一次获取将存储于 remotes/%s）"
-#: builtin/remote.c:910
+#: builtin/remote.c:912
msgid " tracked"
msgstr " 已跟踪"
-#: builtin/remote.c:912
+#: builtin/remote.c:914
msgid " stale (use 'git remote prune' to remove)"
msgstr " 过时（使用 'git remote prune' 来移除）"
-#: builtin/remote.c:914
+#: builtin/remote.c:916
msgid " ???"
msgstr " ???"
-#: builtin/remote.c:955
+#: builtin/remote.c:957
#, c-format
msgid "invalid branch.%s.merge; cannot rebase onto > 1 branch"
msgstr "无效的 branch.%s.merge，不能变基到一个以上的分支"
-#: builtin/remote.c:963
+#: builtin/remote.c:965
#, c-format
msgid "rebases interactively onto remote %s"
msgstr "交互式变基到远程 %s"
-#: builtin/remote.c:964
+#: builtin/remote.c:966
#, c-format
msgid "rebases onto remote %s"
msgstr "变基到远程 %s"
-#: builtin/remote.c:967
+#: builtin/remote.c:969
#, c-format
msgid " merges with remote %s"
msgstr " 与远程 %s 合并"
-#: builtin/remote.c:970
+#: builtin/remote.c:972
#, c-format
msgid "merges with remote %s"
msgstr "与远程 %s 合并"
-#: builtin/remote.c:973
+#: builtin/remote.c:975
#, c-format
msgid "%-*s and with remote %s\n"
msgstr "%-*s 以及和远程 %s\n"
-#: builtin/remote.c:1016
+#: builtin/remote.c:1018
msgid "create"
msgstr "创建"
-#: builtin/remote.c:1019
+#: builtin/remote.c:1021
msgid "delete"
msgstr "删除"
-#: builtin/remote.c:1023
+#: builtin/remote.c:1025
msgid "up to date"
msgstr "最新"
-#: builtin/remote.c:1026
+#: builtin/remote.c:1028
msgid "fast-forwardable"
msgstr "可快进"
-#: builtin/remote.c:1029
+#: builtin/remote.c:1031
msgid "local out of date"
msgstr "本地已过时"
-#: builtin/remote.c:1036
+#: builtin/remote.c:1038
#, c-format
msgid " %-*s forces to %-*s (%s)"
msgstr " %-*s 强制推送至 %-*s (%s)"
-#: builtin/remote.c:1039
+#: builtin/remote.c:1041
#, c-format
msgid " %-*s pushes to %-*s (%s)"
msgstr " %-*s 推送至 %-*s (%s)"
-#: builtin/remote.c:1043
+#: builtin/remote.c:1045
#, c-format
msgid " %-*s forces to %s"
msgstr " %-*s 强制推送至 %s"
-#: builtin/remote.c:1046
+#: builtin/remote.c:1048
#, c-format
msgid " %-*s pushes to %s"
msgstr " %-*s 推送至 %s"
-#: builtin/remote.c:1114
+#: builtin/remote.c:1116
msgid "do not query remotes"
msgstr "不查询远程"
-#: builtin/remote.c:1141
+#: builtin/remote.c:1143
#, c-format
msgid "* remote %s"
msgstr "* 远程 %s"
-#: builtin/remote.c:1142
+#: builtin/remote.c:1144
#, c-format
msgid " Fetch URL: %s"
msgstr " 获取地址：%s"
-#: builtin/remote.c:1143 builtin/remote.c:1156 builtin/remote.c:1295
+#: builtin/remote.c:1145 builtin/remote.c:1158 builtin/remote.c:1297
msgid "(no URL)"
msgstr "(无 URL)"
#. TRANSLATORS: the colon ':' should align with
#. the one in " Fetch URL: %s" translation
-#: builtin/remote.c:1154 builtin/remote.c:1156
+#: builtin/remote.c:1156 builtin/remote.c:1158
#, c-format
msgid " Push URL: %s"
msgstr " 推送地址：%s"
-#: builtin/remote.c:1158 builtin/remote.c:1160 builtin/remote.c:1162
+#: builtin/remote.c:1160 builtin/remote.c:1162 builtin/remote.c:1164
#, c-format
msgid " HEAD branch: %s"
msgstr " HEAD 分支：%s"
# 译者：中文字符串拼接，可删除前导空格
-#: builtin/remote.c:1158
+#: builtin/remote.c:1160
msgid "(not queried)"
msgstr "（未查询）"
-#: builtin/remote.c:1160
+#: builtin/remote.c:1162
msgid "(unknown)"
msgstr "（未知）"
-#: builtin/remote.c:1164
+#: builtin/remote.c:1166
#, c-format
msgid ""
" HEAD branch (remote HEAD is ambiguous, may be one of the following):\n"
msgstr " HEAD 分支（远程 HEAD 模糊，可能是下列中的一个）：\n"
-#: builtin/remote.c:1176
+#: builtin/remote.c:1178
#, c-format
msgid " Remote branch:%s"
msgid_plural " Remote branches:%s"
msgstr[1] " 远程分支：%s"
# 译者：中文字符串拼接，可删除前导空格
-#: builtin/remote.c:1179 builtin/remote.c:1205
+#: builtin/remote.c:1181 builtin/remote.c:1207
msgid " (status not queried)"
msgstr "（状态未查询）"
-#: builtin/remote.c:1188
+#: builtin/remote.c:1190
msgid " Local branch configured for 'git pull':"
msgid_plural " Local branches configured for 'git pull':"
msgstr[0] " 为 'git pull' 配置的本地分支："
msgstr[1] " 为 'git pull' 配置的本地分支："
-#: builtin/remote.c:1196
+#: builtin/remote.c:1198
msgid " Local refs will be mirrored by 'git push'"
msgstr " 本地引用将在 'git push' 时被镜像"
-#: builtin/remote.c:1202
+#: builtin/remote.c:1204
#, c-format
msgid " Local ref configured for 'git push'%s:"
msgid_plural " Local refs configured for 'git push'%s:"
msgstr[0] " 为 'git push' 配置的本地引用%s："
msgstr[1] " 为 'git push' 配置的本地引用%s："
-#: builtin/remote.c:1223
+#: builtin/remote.c:1225
msgid "set refs/remotes/<name>/HEAD according to remote"
msgstr "根据远程设置 refs/remotes/<名称>/HEAD"
-#: builtin/remote.c:1225
+#: builtin/remote.c:1227
msgid "delete refs/remotes/<name>/HEAD"
msgstr "删除 refs/remotes/<名称>/HEAD"
-#: builtin/remote.c:1240
+#: builtin/remote.c:1242
msgid "Cannot determine remote HEAD"
msgstr "无法确定远程 HEAD"
-#: builtin/remote.c:1242
+#: builtin/remote.c:1244
msgid "Multiple remote HEAD branches. Please choose one explicitly with:"
msgstr "多个远程 HEAD 分支。请明确地选择一个用命令："
-#: builtin/remote.c:1252
+#: builtin/remote.c:1254
#, c-format
msgid "Could not delete %s"
msgstr "无法删除 %s"
-#: builtin/remote.c:1260
+#: builtin/remote.c:1262
#, c-format
msgid "Not a valid ref: %s"
msgstr "不是一个有效引用：%s"
-#: builtin/remote.c:1262
+#: builtin/remote.c:1264
#, c-format
msgid "Could not setup %s"
msgstr "不能设置 %s"
# 译者：注意保持前导空格
-#: builtin/remote.c:1280
+#: builtin/remote.c:1282
#, c-format
msgid " %s will become dangling!"
msgstr " %s 将成为摇摆状态！"
# 译者：注意保持前导空格
-#: builtin/remote.c:1281
+#: builtin/remote.c:1283
#, c-format
msgid " %s has become dangling!"
msgstr " %s 已成为摇摆状态！"
-#: builtin/remote.c:1291
+#: builtin/remote.c:1293
#, c-format
msgid "Pruning %s"
msgstr "修剪 %s"
-#: builtin/remote.c:1292
+#: builtin/remote.c:1294
#, c-format
msgid "URL: %s"
msgstr "URL：%s"
-#: builtin/remote.c:1308
+#: builtin/remote.c:1310
#, c-format
msgid " * [would prune] %s"
msgstr " * [将删除] %s"
-#: builtin/remote.c:1311
+#: builtin/remote.c:1313
#, c-format
msgid " * [pruned] %s"
msgstr " * [已删除] %s"
-#: builtin/remote.c:1356
+#: builtin/remote.c:1358
msgid "prune remotes after fetching"
msgstr "抓取后清除远程"
-#: builtin/remote.c:1419 builtin/remote.c:1473 builtin/remote.c:1541
+#: builtin/remote.c:1421 builtin/remote.c:1475 builtin/remote.c:1543
#, c-format
msgid "No such remote '%s'"
msgstr "没有此远程 '%s'"
-#: builtin/remote.c:1435
+#: builtin/remote.c:1437
msgid "add branch"
msgstr "添加分支"
-#: builtin/remote.c:1442
+#: builtin/remote.c:1444
msgid "no remote specified"
msgstr "未指定远程"
-#: builtin/remote.c:1459
+#: builtin/remote.c:1461
msgid "query push URLs rather than fetch URLs"
msgstr "查询推送 URL 地址，而非获取 URL 地址"
-#: builtin/remote.c:1461
+#: builtin/remote.c:1463
msgid "return all URLs"
msgstr "返回所有 URL 地址"
-#: builtin/remote.c:1489
+#: builtin/remote.c:1491
#, c-format
msgid "no URLs configured for remote '%s'"
msgstr "没有给远程仓库 '%s' 设定 URL"
-#: builtin/remote.c:1515
+#: builtin/remote.c:1517
msgid "manipulate push URLs"
msgstr "操作推送 URLS"
-#: builtin/remote.c:1517
+#: builtin/remote.c:1519
msgid "add URL"
msgstr "添加 URL"
-#: builtin/remote.c:1519
+#: builtin/remote.c:1521
msgid "delete URLs"
msgstr "删除 URLS"
-#: builtin/remote.c:1526
+#: builtin/remote.c:1528
msgid "--add --delete doesn't make sense"
msgstr "--add --delete 无意义"
-#: builtin/remote.c:1567
+#: builtin/remote.c:1569
#, c-format
msgid "Invalid old URL pattern: %s"
msgstr "无效的旧 URL 匹配模版：%s"
-#: builtin/remote.c:1575
+#: builtin/remote.c:1577
#, c-format
msgid "No such URL found: %s"
msgstr "未找到此 URL：%s"
-#: builtin/remote.c:1577
+#: builtin/remote.c:1579
msgid "Will not delete all non-push URLs"
msgstr "将不会删除所有非推送 URL 地址"
-#: builtin/remote.c:1591
+#: builtin/remote.c:1593
msgid "be verbose; must be placed before a subcommand"
msgstr "冗长输出；必须置于子命令之前"
-#: builtin/remote.c:1622
+#: builtin/remote.c:1624
#, c-format
msgid "Unknown subcommand: %s"
msgstr "未知子命令：%s"
msgid "git repack [<options>]"
msgstr "git repack [<选项>]"
-#: builtin/repack.c:160
+#: builtin/repack.c:22
+msgid ""
+"Incremental repacks are incompatible with bitmap indexes. Use\n"
+"--no-write-bitmap-index or disable the pack.writebitmaps configuration."
+msgstr ""
+"增量 repack 和 bitmap 索引不兼容。 使用 --no-write-bitmap-index\n"
+"或禁用 pack.writebitmaps 配置。"
+
+#: builtin/repack.c:166
msgid "pack everything in a single pack"
msgstr "所有内容打包到一个包文件中"
-#: builtin/repack.c:162
+#: builtin/repack.c:168
msgid "same as -a, and turn unreachable objects loose"
msgstr "和 -a 相同，并将不可达的对象设为松散对象"
-#: builtin/repack.c:165
+#: builtin/repack.c:171
msgid "remove redundant packs, and run git-prune-packed"
msgstr "删除多余的包，运行 git-prune-packed"
-#: builtin/repack.c:167
+#: builtin/repack.c:173
msgid "pass --no-reuse-delta to git-pack-objects"
msgstr "向 git-pack-objects 传递参数 --no-reuse-delta"
-#: builtin/repack.c:169
+#: builtin/repack.c:175
msgid "pass --no-reuse-object to git-pack-objects"
msgstr "向 git-pack-objects 传递参数 --no-reuse-object"
-#: builtin/repack.c:171
+#: builtin/repack.c:177
msgid "do not run git-update-server-info"
msgstr "不运行 git-update-server-info"
-#: builtin/repack.c:174
+#: builtin/repack.c:180
msgid "pass --local to git-pack-objects"
msgstr "向 git-pack-objects 传递参数 --local"
-#: builtin/repack.c:176
+#: builtin/repack.c:182
msgid "write bitmap index"
msgstr "写 bitmap 索引"
-#: builtin/repack.c:177
+#: builtin/repack.c:183
msgid "approxidate"
msgstr "近似日期"
-#: builtin/repack.c:178
+#: builtin/repack.c:184
msgid "with -A, do not loosen objects older than this"
msgstr "使用 -A，不要将早于给定时间的对象过期"
-#: builtin/repack.c:180
+#: builtin/repack.c:186
msgid "with -a, repack unreachable objects"
msgstr "使用 -a ，重新对不可达对象打包"
-#: builtin/repack.c:182
+#: builtin/repack.c:188
msgid "size of the window used for delta compression"
msgstr "用于增量压缩的窗口值"
-#: builtin/repack.c:183 builtin/repack.c:187
+#: builtin/repack.c:189 builtin/repack.c:193
msgid "bytes"
msgstr "字节"
-#: builtin/repack.c:184
+#: builtin/repack.c:190
msgid "same as the above, but limit memory size instead of entries count"
msgstr "和上面的相似，但限制内存大小而非条目数"
-#: builtin/repack.c:186
+#: builtin/repack.c:192
msgid "limits the maximum delta depth"
msgstr "限制最大增量深度"
-#: builtin/repack.c:188
+#: builtin/repack.c:194
msgid "maximum size of each packfile"
msgstr "每个包文件的最大尺寸"
-#: builtin/repack.c:190
+#: builtin/repack.c:196
msgid "repack objects in packs marked with .keep"
msgstr "对标记为 .keep 的包中的对象重新打包"
-#: builtin/repack.c:200
+#: builtin/repack.c:206
msgid "cannot delete packs in a precious-objects repo"
msgstr "不能删除珍品仓库中的打包文件"
-#: builtin/repack.c:204
+#: builtin/repack.c:210
msgid "--keep-unreachable and -A are incompatible"
msgstr "--keep-unreachable 和 -A 不兼容"
-#: builtin/repack.c:391 builtin/worktree.c:115
+#: builtin/repack.c:400 builtin/worktree.c:115
#, c-format
msgid "failed to remove '%s'"
msgstr "无法删除 '%s'"
msgid "git replace [--format=<format>] [-l [<pattern>]]"
msgstr "git replace [--format=<格式>] [-l [<模式>]]"
-#: builtin/replace.c:325 builtin/replace.c:363 builtin/replace.c:391
+#: builtin/replace.c:330 builtin/replace.c:368 builtin/replace.c:396
#, c-format
msgid "Not a valid object name: '%s'"
msgstr "不是一个有效的对象名：'%s'"
-#: builtin/replace.c:355
+#: builtin/replace.c:360
#, c-format
msgid "bad mergetag in commit '%s'"
msgstr "提交 '%s' 中含有损坏的合并标签"
-#: builtin/replace.c:357
+#: builtin/replace.c:362
#, c-format
msgid "malformed mergetag in commit '%s'"
msgstr "提交 '%s' 中含有非法的合并标签"
-#: builtin/replace.c:368
+#: builtin/replace.c:373
#, c-format
msgid ""
"original commit '%s' contains mergetag '%s' that is discarded; use --edit "
"instead of --graft"
msgstr "原始提交 '%s' 包含已经丢弃的合并标签 '%s'，使用 --edit 代替 --graft"
-#: builtin/replace.c:401
+#: builtin/replace.c:406
#, c-format
msgid "the original commit '%s' has a gpg signature."
msgstr "原始提交 '%s' 中包含一个 GPG 签名"
-#: builtin/replace.c:402
+#: builtin/replace.c:407
msgid "the signature will be removed in the replacement commit!"
msgstr "在替换的提交中签名将被移除！"
-#: builtin/replace.c:408
+#: builtin/replace.c:413
#, c-format
msgid "could not write replacement commit for: '%s'"
msgstr "不能为 '%s' 写替换提交"
-#: builtin/replace.c:432
+#: builtin/replace.c:437
msgid "list replace refs"
msgstr "列出替换的引用"
-#: builtin/replace.c:433
+#: builtin/replace.c:438
msgid "delete replace refs"
msgstr "删除替换的引用"
-#: builtin/replace.c:434
+#: builtin/replace.c:439
msgid "edit existing object"
msgstr "编辑现存的对象"
-#: builtin/replace.c:435
+#: builtin/replace.c:440
msgid "change a commit's parents"
msgstr "修改一个提交的父提交"
-#: builtin/replace.c:436
+#: builtin/replace.c:441
msgid "replace the ref if it exists"
msgstr "如果存在则替换引用"
-#: builtin/replace.c:437
+#: builtin/replace.c:442
msgid "do not pretty-print contents for --edit"
msgstr "不要为 --edit 操作美观显示内容"
-#: builtin/replace.c:438
+#: builtin/replace.c:443
msgid "use this format"
msgstr "使用此格式"
msgid "rev-list does not support display of notes"
msgstr "rev-list 不支持显示注解"
-#: builtin/rev-parse.c:386
+#: builtin/rev-parse.c:393
msgid "git rev-parse --parseopt [<options>] -- [<args>...]"
msgstr "git rev-parse --parseopt [<选项>] -- [<参数>...]"
-#: builtin/rev-parse.c:391
+#: builtin/rev-parse.c:398
msgid "keep the `--` passed as an arg"
msgstr "保持 `--` 作为一个参数传递"
-#: builtin/rev-parse.c:393
+#: builtin/rev-parse.c:400
msgid "stop parsing after the first non-option argument"
msgstr "遇到第一个非选项参数后停止解析"
-#: builtin/rev-parse.c:396
+#: builtin/rev-parse.c:403
msgid "output in stuck long form"
msgstr "以固定长格式输出"
-#: builtin/rev-parse.c:527
+#: builtin/rev-parse.c:534
msgid ""
"git rev-parse --parseopt [<options>] -- [<args>...]\n"
" or: git rev-parse --sq-quote [<arg>...]\n"
msgid "git cherry-pick <subcommand>"
msgstr "git cherry-pick <子命令>"
-#: builtin/revert.c:71
+#: builtin/revert.c:89
#, c-format
msgid "%s: %s cannot be used with %s"
msgstr "%s：%s 不能和 %s 同时使用"
-#: builtin/revert.c:80
+#: builtin/revert.c:98
msgid "end revert or cherry-pick sequence"
msgstr "终止反转或拣选操作"
-#: builtin/revert.c:81
+#: builtin/revert.c:99
msgid "resume revert or cherry-pick sequence"
msgstr "继续反转或拣选操作"
-#: builtin/revert.c:82
+#: builtin/revert.c:100
msgid "cancel revert or cherry-pick sequence"
msgstr "取消反转或拣选操作"
-#: builtin/revert.c:83
+#: builtin/revert.c:101
msgid "don't automatically commit"
msgstr "不要自动提交"
-#: builtin/revert.c:84
+#: builtin/revert.c:102
msgid "edit the commit message"
msgstr "编辑提交说明"
-#: builtin/revert.c:87
-msgid "parent number"
+#: builtin/revert.c:105
+msgid "parent-number"
msgstr "父编号"
-#: builtin/revert.c:89
+#: builtin/revert.c:106
+msgid "select mainline parent"
+msgstr "选择主干父提交编号"
+
+#: builtin/revert.c:108
msgid "merge strategy"
msgstr "合并策略"
-#: builtin/revert.c:90
+#: builtin/revert.c:109
msgid "option"
msgstr "选项"
-#: builtin/revert.c:91
+#: builtin/revert.c:110
msgid "option for merge strategy"
msgstr "合并策略的选项"
-#: builtin/revert.c:100
+#: builtin/revert.c:119
msgid "append commit name"
msgstr "追加提交名称"
-#: builtin/revert.c:102
+#: builtin/revert.c:121
msgid "preserve initially empty commits"
msgstr "保留初始化的空提交"
-#: builtin/revert.c:103
+#: builtin/revert.c:122
msgid "allow commits with empty messages"
msgstr "允许提交说明为空"
-#: builtin/revert.c:104
+#: builtin/revert.c:123
msgid "keep redundant, empty commits"
msgstr "保持多余的、空的提交"
-#: builtin/revert.c:192
+#: builtin/revert.c:211
msgid "revert failed"
msgstr "还原失败"
-#: builtin/revert.c:205
+#: builtin/revert.c:224
msgid "cherry-pick failed"
msgstr "拣选失败"
msgid "git rm [<options>] [--] <file>..."
msgstr "git rm [<选项>] [--] <文件>..."
-#: builtin/rm.c:65
-msgid ""
-"the following submodule (or one of its nested submodules)\n"
-"uses a .git directory:"
-msgid_plural ""
-"the following submodules (or one of their nested submodules)\n"
-"use a .git directory:"
-msgstr[0] "以下子模组（或一个其嵌套子模组）使用了一个 .git 目录："
-msgstr[1] "以下子模组（或一个其嵌套子模组）使用了一个 .git 目录："
-
-#: builtin/rm.c:71
-msgid ""
-"\n"
-"(use 'rm -rf' if you really want to remove it including all of its history)"
-msgstr ""
-"\n"
-"（使用 'rm -rf' 命令如果您真的想删除它及其全部历史）"
-
-#: builtin/rm.c:230
+#: builtin/rm.c:205
msgid ""
"the following file has staged content different from both the\n"
"file and the HEAD:"
msgstr[0] "如下文件其暂存的内容和工作区及 HEAD 中的都不一样："
msgstr[1] "如下文件其暂存的内容和工作区及 HEAD 中的都不一样："
-#: builtin/rm.c:235
+#: builtin/rm.c:210
msgid ""
"\n"
"(use -f to force removal)"
"\n"
"（使用 -f 强制删除）"
-#: builtin/rm.c:239
+#: builtin/rm.c:214
msgid "the following file has changes staged in the index:"
msgid_plural "the following files have changes staged in the index:"
msgstr[0] "下列文件索引中有变更"
msgstr[1] "下列文件索引中有变更"
-#: builtin/rm.c:243 builtin/rm.c:254
+#: builtin/rm.c:218 builtin/rm.c:227
msgid ""
"\n"
"(use --cached to keep the file, or -f to force removal)"
"\n"
"（使用 --cached 保留本地文件，或用 -f 强制删除）"
-#: builtin/rm.c:251
+#: builtin/rm.c:224
msgid "the following file has local modifications:"
msgid_plural "the following files have local modifications:"
msgstr[0] "如下文件有本地修改："
msgstr[1] "如下文件有本地修改："
-#: builtin/rm.c:269
+#: builtin/rm.c:242
msgid "do not list removed files"
msgstr "不列出删除的文件"
-#: builtin/rm.c:270
+#: builtin/rm.c:243
msgid "only remove from the index"
msgstr "只从索引区删除"
-#: builtin/rm.c:271
+#: builtin/rm.c:244
msgid "override the up-to-date check"
msgstr "忽略文件更新状态检查"
-#: builtin/rm.c:272
+#: builtin/rm.c:245
msgid "allow recursive removal"
msgstr "允许递归删除"
-#: builtin/rm.c:274
+#: builtin/rm.c:247
msgid "exit with a zero status even if nothing matched"
msgstr "即使没有匹配，也以零状态退出"
-#: builtin/rm.c:335
+#: builtin/rm.c:308
#, c-format
msgid "not removing '%s' recursively without -r"
msgstr "未提供 -r 选项不会递归删除 '%s'"
-#: builtin/rm.c:374
+#: builtin/rm.c:347
#, c-format
msgid "git rm: unable to remove %s"
msgstr "git rm：不能删除 %s"
+#: builtin/rm.c:370
+#, c-format
+msgid "could not remove '%s'"
+msgstr "无法删除 '%s'"
+
#: builtin/send-pack.c:18
msgid ""
"git send-pack [--all | --mirror] [--dry-run] [--force] [--receive-pack=<git-"
"receive-pack>] [--verbose] [--thin] [--atomic] [<主机>:]<目录> [<引用>...]\n"
" --all 和明确的 <引用> 互斥。"
-#: builtin/send-pack.c:160
+#: builtin/send-pack.c:161
msgid "remote name"
msgstr "远程名称"
-#: builtin/send-pack.c:171
+#: builtin/send-pack.c:175
msgid "use stateless RPC protocol"
msgstr "使用无状态的 RPC 协议"
-#: builtin/send-pack.c:172
+#: builtin/send-pack.c:176
msgid "read refs from stdin"
msgstr "从标准输入读取引用"
-#: builtin/send-pack.c:173
+#: builtin/send-pack.c:177
msgid "print status from remote helper"
msgstr "打印来自远程 helper 的状态"
msgid "git shortlog [<options>] [<revision-range>] [[--] [<path>...]]"
msgstr "git shortlog [<选项>] [<版本范围>] [[--] [<路径>...]]"
-#: builtin/shortlog.c:242
+#: builtin/shortlog.c:248
+msgid "Group by committer rather than author"
+msgstr "按照提交者分组而不是作者"
+
+#: builtin/shortlog.c:250
msgid "sort output according to the number of commits per author"
msgstr "根据每个作者的提交数量排序"
-#: builtin/shortlog.c:244
+#: builtin/shortlog.c:252
msgid "Suppress commit descriptions, only provides commit count"
msgstr "隐藏提交说明，只提供提交数量"
-#: builtin/shortlog.c:246
+#: builtin/shortlog.c:254
msgid "Show the email address of each author"
msgstr "显示每个作者的电子邮件地址"
-#: builtin/shortlog.c:247
+#: builtin/shortlog.c:255
msgid "w[,i1[,i2]]"
msgstr "w[,i1[,i2]]"
-#: builtin/shortlog.c:248
+#: builtin/shortlog.c:256
msgid "Linewrap output"
msgstr "折行输出"
msgid "git show-branch (-g | --reflog)[=<n>[,<base>]] [--list] [<ref>]"
msgstr "git show-branch (-g | --reflog)[=<n>[,<base>]] [--list] [<引用>]"
-#: builtin/show-branch.c:375
+#: builtin/show-branch.c:374
#, c-format
msgid "ignoring %s; cannot handle more than %d ref"
msgid_plural "ignoring %s; cannot handle more than %d refs"
msgstr[0] "忽略 %s，无法处理 %d 个以上的引用"
msgstr[1] "忽略 %s，无法处理 %d 个以上的引用"
-#: builtin/show-branch.c:541
+#: builtin/show-branch.c:536
#, c-format
msgid "no matching refs with %s"
msgstr "没有和 %s 匹配的引用"
-#: builtin/show-branch.c:639
+#: builtin/show-branch.c:632
msgid "show remote-tracking and local branches"
msgstr "显示远程跟踪的和本地的分支"
-#: builtin/show-branch.c:641
+#: builtin/show-branch.c:634
msgid "show remote-tracking branches"
msgstr "显示远程跟踪的分支"
-#: builtin/show-branch.c:643
+#: builtin/show-branch.c:636
msgid "color '*!+-' corresponding to the branch"
msgstr "着色 '*!+-' 到相应的分支"
-#: builtin/show-branch.c:645
+#: builtin/show-branch.c:638
msgid "show <n> more commits after the common ancestor"
msgstr "显示共同祖先后的 <n> 个提交"
-#: builtin/show-branch.c:647
+#: builtin/show-branch.c:640
msgid "synonym to more=-1"
msgstr "和 more=-1 同义"
-#: builtin/show-branch.c:648
+#: builtin/show-branch.c:641
msgid "suppress naming strings"
msgstr "不显示字符串命名"
-#: builtin/show-branch.c:650
+#: builtin/show-branch.c:643
msgid "include the current branch"
msgstr "包括当前分支"
-#: builtin/show-branch.c:652
+#: builtin/show-branch.c:645
msgid "name commits with their object names"
msgstr "以对象名字命名提交"
-#: builtin/show-branch.c:654
+#: builtin/show-branch.c:647
msgid "show possible merge bases"
msgstr "显示可能合并的基线"
-#: builtin/show-branch.c:656
+#: builtin/show-branch.c:649
msgid "show refs unreachable from any other ref"
msgstr "显示没有任何引用的的引用"
-#: builtin/show-branch.c:658
+#: builtin/show-branch.c:651
msgid "show commits in topological order"
msgstr "以拓扑顺序显示提交"
-#: builtin/show-branch.c:661
+#: builtin/show-branch.c:654
msgid "show only commits not on the first branch"
msgstr "只显示不在第一个分支上的提交"
-#: builtin/show-branch.c:663
+#: builtin/show-branch.c:656
msgid "show merges reachable from only one tip"
msgstr "显示仅一个分支可访问的合并提交"
-#: builtin/show-branch.c:665
+#: builtin/show-branch.c:658
msgid "topologically sort, maintaining date order where possible"
msgstr "拓扑方式排序，并尽可能地保持日期顺序"
-#: builtin/show-branch.c:668
+#: builtin/show-branch.c:661
msgid "<n>[,<base>]"
msgstr "<n>[,<base>]"
-#: builtin/show-branch.c:669
+#: builtin/show-branch.c:662
msgid "show <n> most recent ref-log entries starting at base"
msgstr "显示从 base 开始的 <n> 条最近的引用日志记录"
-#: builtin/show-branch.c:703
+#: builtin/show-branch.c:696
msgid ""
"--reflog is incompatible with --all, --remotes, --independent or --merge-base"
msgstr "--reflog 和 --all、--remotes、--independent 或 --merge-base 不兼容"
-#: builtin/show-branch.c:727
+#: builtin/show-branch.c:720
msgid "no branches given, and HEAD is not valid"
msgstr "未提供分支，且 HEAD 无效"
-#: builtin/show-branch.c:730
+#: builtin/show-branch.c:723
msgid "--reflog option needs one branch name"
msgstr "选项 --reflog 需要一个分支名"
-#: builtin/show-branch.c:733
+#: builtin/show-branch.c:726
#, c-format
msgid "only %d entry can be shown at one time."
msgid_plural "only %d entries can be shown at one time."
msgstr[0] "一次只能显示 %d 个条目。"
msgstr[1] "一次只能显示 %d 个条目。"
-#: builtin/show-branch.c:737
+#: builtin/show-branch.c:730
#, c-format
msgid "no such ref %s"
msgstr "无此引用 %s"
-#: builtin/show-branch.c:829
+#: builtin/show-branch.c:814
#, c-format
msgid "cannot handle more than %d rev."
msgid_plural "cannot handle more than %d revs."
msgstr[0] "不能处理 %d 个以上的版本。"
msgstr[1] "不能处理 %d 个以上的版本。"
-#: builtin/show-branch.c:833
+#: builtin/show-branch.c:818
#, c-format
msgid "'%s' is not a valid ref."
msgstr "'%s' 不是一个有效的引用。"
-#: builtin/show-branch.c:836
+#: builtin/show-branch.c:821
#, c-format
msgid "cannot find commit %s (%s)"
-msgstr "不能找到提交 %s (%s)"
+msgstr "不能找到提交 %s（%s）"
#: builtin/show-ref.c:10
msgid ""
msgid "git show-ref --exclude-existing[=<pattern>]"
msgstr "git show-ref --exclude-existing[=<模式>]"
-#: builtin/show-ref.c:165
+#: builtin/show-ref.c:159
msgid "only show tags (can be combined with heads)"
msgstr "只显示标签（可以和头共用）"
-#: builtin/show-ref.c:166
+#: builtin/show-ref.c:160
msgid "only show heads (can be combined with tags)"
msgstr "只显示头（可以和标签共用）"
-#: builtin/show-ref.c:167
+#: builtin/show-ref.c:161
msgid "stricter reference checking, requires exact ref path"
msgstr "更严格的引用检测，需要精确的引用路径"
-#: builtin/show-ref.c:170 builtin/show-ref.c:172
+#: builtin/show-ref.c:164 builtin/show-ref.c:166
msgid "show the HEAD reference, even if it would be filtered out"
msgstr "显示 HEAD 引用，即使被过滤掉"
-#: builtin/show-ref.c:174
+#: builtin/show-ref.c:168
msgid "dereference tags into object IDs"
msgstr "转换标签到对象 ID"
-#: builtin/show-ref.c:176
+#: builtin/show-ref.c:170
msgid "only show SHA1 hash using <n> digits"
msgstr "只显示使用 <n> 个数字的 SHA1 哈希"
-#: builtin/show-ref.c:180
+#: builtin/show-ref.c:174
msgid "do not print results to stdout (useful with --verify)"
msgstr "不打印结果到标准输出（例如与 --verify 参数共用）"
-#: builtin/show-ref.c:182
+#: builtin/show-ref.c:176
msgid "show refs from stdin that aren't in local repository"
msgstr "显示从标准输入中读入的不在本地仓库中的引用"
msgid "prepend comment character and space to each line"
msgstr "为每一行的行首添加注释符和空格"
-#: builtin/submodule--helper.c:24 builtin/submodule--helper.c:1046
+#: builtin/submodule--helper.c:24 builtin/submodule--helper.c:1075
#, c-format
msgid "No such ref: %s"
msgstr "没有这样的引用：%s"
-#: builtin/submodule--helper.c:31 builtin/submodule--helper.c:1055
+#: builtin/submodule--helper.c:31 builtin/submodule--helper.c:1084
#, c-format
msgid "Expecting a full ref name, got %s"
msgstr "期望一个完整的引用名称，却得到 %s"
msgid "cannot strip one component off url '%s'"
msgstr "无法从 url '%s' 剥离一个组件"
-#: builtin/submodule--helper.c:282 builtin/submodule--helper.c:408
-#: builtin/submodule--helper.c:590
+#: builtin/submodule--helper.c:305 builtin/submodule--helper.c:630
msgid "alternative anchor for relative paths"
msgstr "相对路径的替代锚记（anchor）"
-#: builtin/submodule--helper.c:287
+#: builtin/submodule--helper.c:310
msgid "git submodule--helper list [--prefix=<path>] [<path>...]"
msgstr "git submodule--helper list [--prefix=<路径>] [<路径>...]"
-#: builtin/submodule--helper.c:329 builtin/submodule--helper.c:343
+#: builtin/submodule--helper.c:356 builtin/submodule--helper.c:380
#, c-format
msgid "No url found for submodule path '%s' in .gitmodules"
msgstr "在 .gitmodules 中未找到子模组 '%s' 的 url"
-#: builtin/submodule--helper.c:369
+#: builtin/submodule--helper.c:395
+#, c-format
+msgid ""
+"could not lookup configuration '%s'. Assuming this repository is its own "
+"authoritative upstream."
+msgstr "无法找到配置 '%s'。假定这个仓库是其自身的官方上游。"
+
+#: builtin/submodule--helper.c:406
#, c-format
msgid "Failed to register url for submodule path '%s'"
msgstr "无法为子模组 '%s' 注册 url"
-#: builtin/submodule--helper.c:373
+#: builtin/submodule--helper.c:410
#, c-format
msgid "Submodule '%s' (%s) registered for path '%s'\n"
msgstr "子模组 '%s'（%s）未对路径 '%s' 注册\n"
#
-#: builtin/submodule--helper.c:383
+#: builtin/submodule--helper.c:420
#, c-format
msgid "warning: command update mode suggested for submodule '%s'\n"
msgstr "警告：建议子模组 '%s' 使用命令更新模式\n"
-#: builtin/submodule--helper.c:390
+#: builtin/submodule--helper.c:427
#, c-format
msgid "Failed to register update mode for submodule path '%s'"
msgstr "无法为子模组 '%s' 注册更新模式"
-#: builtin/submodule--helper.c:409
+#: builtin/submodule--helper.c:443
msgid "Suppress output for initializing a submodule"
msgstr "初始化子模组时抑制输出"
-#: builtin/submodule--helper.c:414
+#: builtin/submodule--helper.c:448
msgid "git submodule--helper init [<path>]"
msgstr "git submodule--helper init [<路径>]"
-#: builtin/submodule--helper.c:435
+#: builtin/submodule--helper.c:476
msgid "git submodule--helper name <path>"
msgstr "git submodule--helper name <路径>"
-#: builtin/submodule--helper.c:441
+#: builtin/submodule--helper.c:482
#, c-format
msgid "no submodule mapping found in .gitmodules for path '%s'"
msgstr "在 .gitmodules 中没有发现路径 '%s' 的子模组映射"
-#: builtin/submodule--helper.c:524 builtin/submodule--helper.c:527
+#: builtin/submodule--helper.c:565 builtin/submodule--helper.c:568
#, c-format
msgid "submodule '%s' cannot add alternate: %s"
msgstr "子模组 '%s' 不能添加仓库备选：%s"
-#: builtin/submodule--helper.c:563
+#: builtin/submodule--helper.c:604
#, c-format
msgid "Value '%s' for submodule.alternateErrorStrategy is not recognized"
msgstr "不能识别 submodule.alternateErrorStrategy 的取值 '%s'"
-#: builtin/submodule--helper.c:570
+#: builtin/submodule--helper.c:611
#, c-format
msgid "Value '%s' for submodule.alternateLocation is not recognized"
msgstr "不能识别 submodule.alternateLocaion 的取值 '%s'"
-#: builtin/submodule--helper.c:593
+#: builtin/submodule--helper.c:633
msgid "where the new submodule will be cloned to"
msgstr "新的子模组将要克隆的路径"
-#: builtin/submodule--helper.c:596
+#: builtin/submodule--helper.c:636
msgid "name of the new submodule"
msgstr "新子模组的名称"
-#: builtin/submodule--helper.c:599
+#: builtin/submodule--helper.c:639
msgid "url where to clone the submodule from"
msgstr "克隆子模组的 url 地址"
-#: builtin/submodule--helper.c:605
+#: builtin/submodule--helper.c:645
msgid "depth for shallow clones"
msgstr "浅克隆的深度"
-#: builtin/submodule--helper.c:608 builtin/submodule--helper.c:964
+#: builtin/submodule--helper.c:648 builtin/submodule--helper.c:993
msgid "force cloning progress"
-msgstr "显示克隆进度"
+msgstr "强制显示克隆进度"
-#: builtin/submodule--helper.c:613
+#: builtin/submodule--helper.c:653
msgid ""
"git submodule--helper clone [--prefix=<path>] [--quiet] [--reference "
"<repository>] [--name <name>] [--depth <depth>] --url <url> --path <path>"
"git submodule--helper clone [--prefix=<路径>] [--quiet] [--reference <仓库>] "
"[--name <名字>] [--depth <深度>] --url <url> --path <路径>"
-#: builtin/submodule--helper.c:638 builtin/submodule--helper.c:648
-#, c-format
-msgid "could not create directory '%s'"
-msgstr "不能创建目录 '%s'"
-
-#: builtin/submodule--helper.c:644
+#: builtin/submodule--helper.c:684
#, c-format
msgid "clone of '%s' into submodule path '%s' failed"
msgstr "无法克隆 '%s' 到子模组路径 '%s'"
-#: builtin/submodule--helper.c:660
-#, c-format
-msgid "cannot open file '%s'"
-msgstr "无法打开文件 '%s'"
-
-#: builtin/submodule--helper.c:665
-#, c-format
-msgid "could not close file %s"
-msgstr "无法关闭文件 %s"
-
-#: builtin/submodule--helper.c:672
+#: builtin/submodule--helper.c:699
#, c-format
msgid "could not get submodule directory for '%s'"
msgstr "无法得到 '%s' 的子模组目录"
-#: builtin/submodule--helper.c:726
+#: builtin/submodule--helper.c:764
#, c-format
msgid "Submodule path '%s' not initialized"
msgstr "子模组 '%s' 尚未初始化"
-#: builtin/submodule--helper.c:730
+#: builtin/submodule--helper.c:768
msgid "Maybe you want to use 'update --init'?"
msgstr "也许您想要执行 'update --init'？"
-#: builtin/submodule--helper.c:756
+#: builtin/submodule--helper.c:793
#, c-format
msgid "Skipping unmerged submodule %s"
msgstr "略过未合并的子模组 %s"
-#: builtin/submodule--helper.c:777
+#: builtin/submodule--helper.c:814
#, c-format
msgid "Skipping submodule '%s'"
msgstr "略过子模组 '%s'"
-#: builtin/submodule--helper.c:913
+#: builtin/submodule--helper.c:942
#, c-format
msgid "Failed to clone '%s'. Retry scheduled"
msgstr "克隆 '%s' 失败。按计划重试"
-#: builtin/submodule--helper.c:924
+#: builtin/submodule--helper.c:953
#, c-format
msgid "Failed to clone '%s' a second time, aborting"
msgstr "第二次尝试克隆 '%s' 失败，退出"
-#: builtin/submodule--helper.c:945
+#: builtin/submodule--helper.c:974 builtin/submodule--helper.c:1162
msgid "path into the working tree"
msgstr "到工作区的路径"
-#: builtin/submodule--helper.c:948
+#: builtin/submodule--helper.c:977
msgid "path into the working tree, across nested submodule boundaries"
msgstr "工作区中的路径，递归嵌套子模组"
-#: builtin/submodule--helper.c:952
+#: builtin/submodule--helper.c:981
msgid "rebase, merge, checkout or none"
msgstr "rebase、merge、checkout 或 none"
-#: builtin/submodule--helper.c:956
+#: builtin/submodule--helper.c:985
msgid "Create a shallow clone truncated to the specified number of revisions"
msgstr "创建一个指定深度的浅克隆"
-#: builtin/submodule--helper.c:959
+#: builtin/submodule--helper.c:988
msgid "parallel jobs"
msgstr "并发任务"
-#: builtin/submodule--helper.c:961
+#: builtin/submodule--helper.c:990
msgid "whether the initial clone should follow the shallow recommendation"
msgstr "初始克隆是否应该遵守推荐的浅克隆选项"
-#: builtin/submodule--helper.c:962
+#: builtin/submodule--helper.c:991
msgid "don't print cloning progress"
msgstr "不要输出克隆进度"
-#: builtin/submodule--helper.c:969
+#: builtin/submodule--helper.c:998
msgid "git submodule--helper update_clone [--prefix=<path>] [<path>...]"
msgstr "git submodule--helper update_clone [--prefix=<路径>] [<路径>...]"
-#: builtin/submodule--helper.c:979
+#: builtin/submodule--helper.c:1008
msgid "bad value for update parameter"
msgstr "update 参数取值错误"
-#: builtin/submodule--helper.c:1050
+#: builtin/submodule--helper.c:1079
#, c-format
msgid ""
"Submodule (%s) branch configured to inherit branch from superproject, but "
"the superproject is not on any branch"
msgstr "子模组（%s）的分支配置为继承上级项目的分支，但是上级项目不在任何分支上"
-#: builtin/submodule--helper.c:1100
+#: builtin/submodule--helper.c:1163
+msgid "recurse into submodules"
+msgstr "在子模组中递归"
+
+#: builtin/submodule--helper.c:1169
+msgid "git submodule--helper embed-git-dir [<path>...]"
+msgstr "git submodule--helper embed-git-dir [<路径>...]"
+
+#: builtin/submodule--helper.c:1226
msgid "submodule--helper subcommand must be called with a subcommand"
msgstr "submodule-helper 子命令必须由另外的子命令调用"
-#: builtin/submodule--helper.c:1107
+#: builtin/submodule--helper.c:1233
+#, c-format
+msgid "%s doesn't support --super-prefix"
+msgstr "%s 不支持 --super-prefix"
+
+#: builtin/submodule--helper.c:1239
#, c-format
msgid "'%s' is not a valid submodule--helper subcommand"
msgstr "'%s' 不是一个有效的 submodule--helper 子命令"
#: builtin/tag.c:25
msgid ""
-"git tag -l [-n[<num>]] [--contains <commit>] [--points-at <object>]\n"
+"git tag -l [-n[<num>]] [--contains <commit>] [--no-contains <commit>] [--"
+"points-at <object>]\n"
"\t\t[--format=<format>] [--[no-]merged [<commit>]] [<pattern>...]"
msgstr ""
-"git tag -l [-n[<数字>]] [--contains <提交>] [--points-at <对象>]\n"
+"git tag -l [-n[<数字>]] [--contains <提交>] [--no-contains <提交>] [--points-"
+"at <对象>]\n"
"\t\t[--format=<格式>] [--[no-]merged [<提交>]] [<模式>...]"
#: builtin/tag.c:27
-msgid "git tag -v <tagname>..."
-msgstr "git tag -v <标签名>..."
+msgid "git tag -v [--format=<format>] <tagname>..."
+msgstr "git tag -v [--format=<格式>] <标签名>..."
-#: builtin/tag.c:81
-#, c-format
-msgid "tag name too long: %.*s..."
-msgstr "标签名称太长：%.*s..."
-
-#: builtin/tag.c:86
+#: builtin/tag.c:83
#, c-format
msgid "tag '%s' not found."
msgstr "未发现标签 '%s'。"
-#: builtin/tag.c:101
+#: builtin/tag.c:99
#, c-format
msgid "Deleted tag '%s' (was %s)\n"
msgstr "已删除标签 '%s'（曾为 %s）\n"
-#: builtin/tag.c:117
+#: builtin/tag.c:128
#, c-format
msgid ""
"\n"
" %s\n"
"以 '%c' 开头的行将被忽略。\n"
-#: builtin/tag.c:121
+#: builtin/tag.c:132
#, c-format
msgid ""
"\n"
" %s\n"
"以 '%c' 开头的行将被保留，如果您愿意也可以删除它们。\n"
-#: builtin/tag.c:199
+#: builtin/tag.c:210
msgid "unable to sign the tag"
msgstr "无法签署标签"
-#: builtin/tag.c:201
+#: builtin/tag.c:212
msgid "unable to write tag file"
msgstr "无法写标签文件"
-#: builtin/tag.c:226
+#: builtin/tag.c:236
msgid "bad object type."
msgstr "坏的对象类型。"
-#: builtin/tag.c:239
-msgid "tag header too big."
-msgstr "标签头信息太大。"
-
-#: builtin/tag.c:275
+#: builtin/tag.c:282
msgid "no tag message?"
msgstr "无标签说明？"
-#: builtin/tag.c:281
+#: builtin/tag.c:289
#, c-format
msgid "The tag message has been left in %s\n"
msgstr "标签说明被保留在 %s\n"
-#: builtin/tag.c:339
+#: builtin/tag.c:397
msgid "list tag names"
msgstr "列出标签名称"
-#: builtin/tag.c:341
+#: builtin/tag.c:399
msgid "print <n> lines of each tag message"
msgstr "每个标签信息打印 <n> 行"
-#: builtin/tag.c:343
+#: builtin/tag.c:401
msgid "delete tags"
msgstr "删除标签"
-#: builtin/tag.c:344
+#: builtin/tag.c:402
msgid "verify tags"
msgstr "验证标签"
-#: builtin/tag.c:346
+#: builtin/tag.c:404
msgid "Tag creation options"
msgstr "标签创建选项"
-#: builtin/tag.c:348
+#: builtin/tag.c:406
msgid "annotated tag, needs a message"
msgstr "附注标签，需要一个说明"
-#: builtin/tag.c:350
+#: builtin/tag.c:408
msgid "tag message"
msgstr "标签说明"
-#: builtin/tag.c:352
+#: builtin/tag.c:410
msgid "annotated and GPG-signed tag"
msgstr "附注并附加 GPG 签名的标签"
-#: builtin/tag.c:356
+#: builtin/tag.c:414
msgid "use another key to sign the tag"
msgstr "使用另外的私钥签名该标签"
-#: builtin/tag.c:357
+#: builtin/tag.c:415
msgid "replace the tag if exists"
msgstr "如果存在，替换现有的标签"
-#: builtin/tag.c:358 builtin/update-ref.c:368
+#: builtin/tag.c:416 builtin/update-ref.c:368
msgid "create a reflog"
msgstr "创建引用日志"
-#: builtin/tag.c:360
+#: builtin/tag.c:418
msgid "Tag listing options"
msgstr "标签列表选项"
-#: builtin/tag.c:361
+#: builtin/tag.c:419
msgid "show tag list in columns"
msgstr "以列的方式显示标签列表"
-#: builtin/tag.c:362 builtin/tag.c:363
+#: builtin/tag.c:420 builtin/tag.c:422
msgid "print only tags that contain the commit"
-msgstr "只打印包含提交的标签"
+msgstr "只打印包含该提交的标签"
+
+#: builtin/tag.c:421 builtin/tag.c:423
+msgid "print only tags that don't contain the commit"
+msgstr "只打印不包含该提交的标签"
-#: builtin/tag.c:364
+#: builtin/tag.c:424
msgid "print only tags that are merged"
msgstr "只打印已经合并的标签"
-#: builtin/tag.c:365
+#: builtin/tag.c:425
msgid "print only tags that are not merged"
msgstr "只打印尚未合并的标签"
-#: builtin/tag.c:370
+#: builtin/tag.c:430
msgid "print only tags of the object"
-msgstr "只打印对象的标签"
+msgstr "只打印指向该对象的标签"
-#: builtin/tag.c:399
+#: builtin/tag.c:469
msgid "--column and -n are incompatible"
msgstr "--column 和 -n 不兼容"
-#: builtin/tag.c:419
-msgid "-n option is only allowed with -l."
-msgstr "-n 选项只允许和 -l 同时使用。"
+#: builtin/tag.c:491
+msgid "-n option is only allowed in list mode"
+msgstr "-n 选项只允许用在列表显示模式"
-#: builtin/tag.c:421
-msgid "--contains option is only allowed with -l."
-msgstr "--contains 选项只允许和 -l 同时使用。"
+#: builtin/tag.c:493
+msgid "--contains option is only allowed in list mode"
+msgstr "--contains 选项只允许用在列表显示模式"
-#: builtin/tag.c:423
-msgid "--points-at option is only allowed with -l."
-msgstr "--points-at 选项只允许和 -l 同时使用。"
+#: builtin/tag.c:495
+msgid "--no-contains option is only allowed in list mode"
+msgstr "--no-contains 选项只允许用在列表显示模式"
-#: builtin/tag.c:425
-msgid "--merged and --no-merged option are only allowed with -l"
-msgstr "选项 --merged 和 --no-merged 只能和 -l 共用"
+#: builtin/tag.c:497
+msgid "--points-at option is only allowed in list mode"
+msgstr "--points-at 选项只允许用在列表显示模式"
+
+#: builtin/tag.c:499
+msgid "--merged and --no-merged options are only allowed in list mode"
+msgstr "--merged 和 --no-merged 选项只允许用在列表显示模式"
-#: builtin/tag.c:433
+#: builtin/tag.c:510
msgid "only one -F or -m option is allowed."
msgstr "只允许一个 -F 或 -m 选项。"
-#: builtin/tag.c:452
+#: builtin/tag.c:529
msgid "too many params"
msgstr "太多参数"
-#: builtin/tag.c:458
+#: builtin/tag.c:535
#, c-format
msgid "'%s' is not a valid tag name."
msgstr "'%s' 不是一个有效的标签名称。"
-#: builtin/tag.c:463
+#: builtin/tag.c:540
#, c-format
msgid "tag '%s' already exists"
msgstr "标签 '%s' 已存在"
-#: builtin/tag.c:491
+#: builtin/tag.c:570
#, c-format
msgid "Updated tag '%s' (was %s)\n"
msgstr "已更新标签 '%s'（曾为 %s）\n"
#: builtin/update-index.c:85
#, c-format
msgid "failed to stat %s"
-msgstr "无法枚举 %s 状态"
+msgstr "对 %s 调用 stat 失败"
#: builtin/update-index.c:95
#, c-format
msgid "failed to delete file %s"
msgstr "无法删除文件 %s"
-#: builtin/update-index.c:110 builtin/update-index.c:212
+#: builtin/update-index.c:110 builtin/update-index.c:216
#, c-format
msgid "failed to delete directory %s"
msgstr "无法删除目录 %s"
-#: builtin/update-index.c:133
+#: builtin/update-index.c:135
#, c-format
msgid "Testing mtime in '%s' "
msgstr "在 '%s' 中测试 mtime "
-#: builtin/update-index.c:145
+#: builtin/update-index.c:149
msgid "directory stat info does not change after adding a new file"
msgstr "添加一个新文件后，目录的状态信息未改变"
-#: builtin/update-index.c:158
+#: builtin/update-index.c:162
msgid "directory stat info does not change after adding a new directory"
msgstr "添加一个新目录后，目录的状态信息未改变"
-#: builtin/update-index.c:171
+#: builtin/update-index.c:175
msgid "directory stat info changes after updating a file"
msgstr "更新一个文件后，目录的状态信息被修改"
-#: builtin/update-index.c:182
+#: builtin/update-index.c:186
msgid "directory stat info changes after adding a file inside subdirectory"
msgstr "在子目录中添加文件后，目录的状态信息被修改"
-#: builtin/update-index.c:193
+#: builtin/update-index.c:197
msgid "directory stat info does not change after deleting a file"
msgstr "删除一个文件后，目录的状态信息未改变"
-#: builtin/update-index.c:206
+#: builtin/update-index.c:210
msgid "directory stat info does not change after deleting a directory"
msgstr "删除一个目录后，目录的状态信息未改变"
-#: builtin/update-index.c:213
+#: builtin/update-index.c:217
msgid " OK"
msgstr " OK"
-#: builtin/update-index.c:564
+#: builtin/update-index.c:568
msgid "git update-index [<options>] [--] [<file>...]"
msgstr "git update-index [<选项>] [--] [<文件>...]"
-#: builtin/update-index.c:919
+#: builtin/update-index.c:923
msgid "continue refresh even when index needs update"
msgstr "当索引需要更新时继续刷新"
-#: builtin/update-index.c:922
+#: builtin/update-index.c:926
msgid "refresh: ignore submodules"
msgstr "刷新：忽略子模组"
-#: builtin/update-index.c:925
+#: builtin/update-index.c:929
msgid "do not ignore new files"
msgstr "不忽略新的文件"
-#: builtin/update-index.c:927
+#: builtin/update-index.c:931
msgid "let files replace directories and vice-versa"
msgstr "让文件替换目录（反之亦然）"
-#: builtin/update-index.c:929
+#: builtin/update-index.c:933
msgid "notice files missing from worktree"
msgstr "通知文件从工作区丢失"
-#: builtin/update-index.c:931
+#: builtin/update-index.c:935
msgid "refresh even if index contains unmerged entries"
msgstr "即使索引区包含未合并的条目也执行刷新"
-#: builtin/update-index.c:934
+#: builtin/update-index.c:938
msgid "refresh stat information"
msgstr "刷新统计信息"
-#: builtin/update-index.c:938
+#: builtin/update-index.c:942
msgid "like --refresh, but ignore assume-unchanged setting"
msgstr "类似于 --refresh，但是忽略 assume-unchanged 设置"
-#: builtin/update-index.c:942
+#: builtin/update-index.c:946
msgid "<mode>,<object>,<path>"
msgstr "<存取模式>,<对象>,<路径>"
-#: builtin/update-index.c:943
+#: builtin/update-index.c:947
msgid "add the specified entry to the index"
msgstr "添加指定的条目到索引区"
-#: builtin/update-index.c:952
+#: builtin/update-index.c:956
msgid "mark files as \"not changing\""
msgstr "把文件标记为 \"没有变更\""
-#: builtin/update-index.c:955
+#: builtin/update-index.c:959
msgid "clear assumed-unchanged bit"
msgstr "清除 assumed-unchanged 位"
-#: builtin/update-index.c:958
+#: builtin/update-index.c:962
msgid "mark files as \"index-only\""
msgstr "把文件标记为 \"仅索引\""
-#: builtin/update-index.c:961
+#: builtin/update-index.c:965
msgid "clear skip-worktree bit"
msgstr "清除 skip-worktree 位"
-#: builtin/update-index.c:964
+#: builtin/update-index.c:968
msgid "add to index only; do not add content to object database"
msgstr "只添加到索引区；不添加对象到对象库"
-#: builtin/update-index.c:966
+#: builtin/update-index.c:970
msgid "remove named paths even if present in worktree"
msgstr "即使存在工作区里，也删除路径"
-#: builtin/update-index.c:968
+#: builtin/update-index.c:972
msgid "with --stdin: input lines are terminated by null bytes"
msgstr "携带 --stdin：输入的行以 null 字符终止"
-#: builtin/update-index.c:970
+#: builtin/update-index.c:974
msgid "read list of paths to be updated from standard input"
msgstr "从标准输入中读取需要更新的路径列表"
-#: builtin/update-index.c:974
+#: builtin/update-index.c:978
msgid "add entries from standard input to the index"
msgstr "从标准输入添加条目到索引区"
-#: builtin/update-index.c:978
+#: builtin/update-index.c:982
msgid "repopulate stages #2 and #3 for the listed paths"
msgstr "为指定文件重新生成第2和第3暂存区"
-#: builtin/update-index.c:982
+#: builtin/update-index.c:986
msgid "only update entries that differ from HEAD"
msgstr "只更新与 HEAD 不同的条目"
-#: builtin/update-index.c:986
+#: builtin/update-index.c:990
msgid "ignore files missing from worktree"
msgstr "忽略工作区丢失的文件"
-#: builtin/update-index.c:989
+#: builtin/update-index.c:993
msgid "report actions to standard output"
msgstr "在标准输出显示操作"
-#: builtin/update-index.c:991
+#: builtin/update-index.c:995
msgid "(for porcelains) forget saved unresolved conflicts"
msgstr "(for porcelains) 忘记保存的未解决的冲突"
-#: builtin/update-index.c:995
+#: builtin/update-index.c:999
msgid "write index in this format"
msgstr "以这种格式写入索引区"
-#: builtin/update-index.c:997
+#: builtin/update-index.c:1001
msgid "enable or disable split index"
msgstr "启用或禁用索引拆分"
-#: builtin/update-index.c:999
+#: builtin/update-index.c:1003
msgid "enable/disable untracked cache"
msgstr "启用/禁用对未跟踪文件的缓存"
-#: builtin/update-index.c:1001
+#: builtin/update-index.c:1005
msgid "test if the filesystem supports untracked cache"
msgstr "测试文件系统是否支持未跟踪文件缓存"
-#: builtin/update-index.c:1003
+#: builtin/update-index.c:1007
msgid "enable untracked cache without testing the filesystem"
msgstr "无需检测文件系统，启用对未跟踪文件的缓存"
-#: builtin/update-index.c:1119
+#: builtin/update-index.c:1107
+msgid ""
+"core.splitIndex is set to false; remove or change it, if you really want to "
+"enable split index"
+msgstr ""
+"core.splitIndex 被设置为 false。如果您确实要启用索引拆分，请删除或修改它。"
+
+#: builtin/update-index.c:1116
+msgid ""
+"core.splitIndex is set to true; remove or change it, if you really want to "
+"disable split index"
+msgstr ""
+"core.splitIndex 被设置为 true。如果您确实要禁用索引拆分，请删除或修改它。"
+
+#: builtin/update-index.c:1127
msgid ""
"core.untrackedCache is set to true; remove or change it, if you really want "
"to disable the untracked cache"
"core.untrackedCache 被设置为 true。如果您确实要禁用未跟踪文件缓存，请删除或修"
"改它。"
-#: builtin/update-index.c:1123
+#: builtin/update-index.c:1131
msgid "Untracked cache disabled"
msgstr "缓存未跟踪文件被禁用"
-#: builtin/update-index.c:1131
+#: builtin/update-index.c:1139
msgid ""
"core.untrackedCache is set to false; remove or change it, if you really want "
"to enable the untracked cache"
"core.untrackedCache 被设置为 false。如果您确实要启用未跟踪文件缓存，请删除或"
"修改它。"
-#: builtin/update-index.c:1135
+#: builtin/update-index.c:1143
#, c-format
msgid "Untracked cache enabled for '%s'"
msgstr "缓存未跟踪文件在 '%s' 启用"
msgid "print commit contents"
msgstr "打印提交内容"
-#: builtin/verify-commit.c:73 builtin/verify-tag.c:35
+#: builtin/verify-commit.c:73 builtin/verify-tag.c:37
msgid "print raw gpg status output"
msgstr "打印原始 gpg 状态输出"
msgid "show statistics only"
msgstr "只显示统计"
-#: builtin/verify-tag.c:17
-msgid "git verify-tag [-v | --verbose] <tag>..."
-msgstr "git verify-tag [-v | --verbose] <标签>..."
+#: builtin/verify-tag.c:18
+msgid "git verify-tag [-v | --verbose] [--format=<format>] <tag>..."
+msgstr "git verify-tag [-v | --verbose] [--format=<格式>] <标签>..."
-#: builtin/verify-tag.c:34
+#: builtin/verify-tag.c:36
msgid "print tag contents"
msgstr "打印标签内容"
msgid "git worktree unlock <path>"
msgstr "git worktree unlock <路径>"
-#: builtin/worktree.c:42
+#: builtin/worktree.c:43
#, c-format
msgid "Removing worktrees/%s: not a valid directory"
msgstr "删除工作区/%s：不是一个有效的目录"
-#: builtin/worktree.c:48
+#: builtin/worktree.c:49
#, c-format
msgid "Removing worktrees/%s: gitdir file does not exist"
msgstr "删除 worktrees/%s：gitdir 文件不存在"
-#: builtin/worktree.c:53
+#: builtin/worktree.c:54
#, c-format
msgid "Removing worktrees/%s: unable to read gitdir file (%s)"
msgstr "删除 worktrees/%s：无法读取 gitdir 文件 (%s)"
-#: builtin/worktree.c:64
+#: builtin/worktree.c:65
#, c-format
msgid "Removing worktrees/%s: invalid gitdir file"
msgstr "删除 worktrees/%s：无效的 gitdir 文件"
-#: builtin/worktree.c:80
+#: builtin/worktree.c:81
#, c-format
msgid "Removing worktrees/%s: gitdir file points to non-existent location"
msgstr "删除 worktrees/%s：gitdir 文件的指向不存在"
+#: builtin/worktree.c:128
+msgid "report pruned working trees"
+msgstr "报告清除的工作区"
+
+#: builtin/worktree.c:130
+msgid "expire working trees older than <time>"
+msgstr "将早于 <time> 的工作区过期"
+
#: builtin/worktree.c:204
#, c-format
msgid "'%s' already exists"
msgstr "'%s' 已经存在"
-#: builtin/worktree.c:236
+#: builtin/worktree.c:235
#, c-format
msgid "could not create directory of '%s'"
msgstr "不能创建目录 '%s'"
-#: builtin/worktree.c:272
+#: builtin/worktree.c:274
#, c-format
msgid "Preparing %s (identifier %s)"
-msgstr "准备 %s （标识符 %s）"
+msgstr "准备 %s（标识符 %s）"
-#: builtin/worktree.c:323
+#: builtin/worktree.c:328
msgid "checkout <branch> even if already checked out in other worktree"
msgstr "检出分支 <branch> 即使已经被检出到其它工作区"
-#: builtin/worktree.c:325
+#: builtin/worktree.c:330
msgid "create a new branch"
msgstr "创建一个新分支"
-#: builtin/worktree.c:327
+#: builtin/worktree.c:332
msgid "create or reset a branch"
msgstr "创建或重置一个分支"
-#: builtin/worktree.c:329
+#: builtin/worktree.c:334
msgid "populate the new working tree"
msgstr "生成新的工作区"
-#: builtin/worktree.c:337
+#: builtin/worktree.c:335
+msgid "keep the new working tree locked"
+msgstr "锁定新工作区"
+
+#: builtin/worktree.c:343
msgid "-b, -B, and --detach are mutually exclusive"
msgstr "-b、-B 和 --detach 是互斥的"
-#: builtin/worktree.c:470
+#: builtin/worktree.c:478
msgid "reason for locking"
msgstr "锁定原因"
-#: builtin/worktree.c:482 builtin/worktree.c:515
+#: builtin/worktree.c:490 builtin/worktree.c:523
#, c-format
msgid "'%s' is not a working tree"
msgstr "'%s' 不是一个工作区"
-#: builtin/worktree.c:484 builtin/worktree.c:517
+#: builtin/worktree.c:492 builtin/worktree.c:525
msgid "The main working tree cannot be locked or unlocked"
msgstr "主工作区无法被加锁或解锁"
-#: builtin/worktree.c:489
+#: builtin/worktree.c:497
#, c-format
msgid "'%s' is already locked, reason: %s"
msgstr "'%s' 已被锁定，原因：%s"
-#: builtin/worktree.c:491
+#: builtin/worktree.c:499
#, c-format
msgid "'%s' is already locked"
msgstr "'%s' 已被锁定"
-#: builtin/worktree.c:519
+#: builtin/worktree.c:527
#, c-format
msgid "'%s' is not locked"
msgstr "'%s' 未被锁定"
msgid "git upload-pack [<options>] <dir>"
msgstr "git upload-pack [<选项>] <目录>"
-#: upload-pack.c:1028
+#: upload-pack.c:1040
msgid "quit after a single request/response exchange"
msgstr "在一次单独的请求/响应（request/response）交换后退出"
-#: upload-pack.c:1030
+#: upload-pack.c:1042
msgid "exit immediately after initial ref advertisement"
msgstr "在初始的引用广告后立即退出"
-#: upload-pack.c:1032
+#: upload-pack.c:1044
msgid "do not try <directory>/.git/ if <directory> is no Git directory"
msgstr "不要尝试 <directory>/.git/ 如果 <directory> 不是一个 Git 目录"
-#: upload-pack.c:1034
+#: upload-pack.c:1046
msgid "interrupt transfer after <n> seconds of inactivity"
msgstr "不活动 <n> 秒钟后终止传输"
"\n"
"\tchmod 0700 %s"
msgstr ""
-"您 socket 目录权限过于放松，其他用户可能会读取您缓存的认证信息。考虑执行：\n"
+"您的 socket 目录权限过于宽松，其他用户可能会读取您缓存的认证信息。考虑执"
+"行：\n"
"\n"
"\tchmod 0700 %s"
"查看 'git help <命令>' 或 'git help <概念>' 以获取给定子命令或概念的\n"
"帮助。"
-#: http.c:342
+#: http.c:336
+#, c-format
+msgid "negative value for http.postbuffer; defaulting to %d"
+msgstr "http.postbuffer 为负值，默认为 %d"
+
+#: http.c:357
msgid "Delegation control is not supported with cURL < 7.22.0"
msgstr "当 cURL < 7.22.0 时，不支持委托控制"
-#: http.c:351
+#: http.c:366
msgid "Public key pinning not supported with cURL < 7.44.0"
msgstr "不支持公钥文件锁定，因为 cURL < 7.44.0"
+#: http.c:1766
+#, c-format
+msgid ""
+"unable to update url base from redirection:\n"
+" asked for: %s\n"
+" redirect: %s"
+msgstr ""
+"不能更新重定向的 url base：\n"
+" 请求：%s\n"
+" 重定向：%s"
+
+#: remote-curl.c:323
+#, c-format
+msgid "redirecting to %s"
+msgstr "重定向到 %s"
+
#: common-cmds.h:9
msgid "start a working area (see also: git help tutorial)"
msgstr "开始一个工作区（参见：git help tutorial）"
msgid "Simple merge did not work, trying automatic merge."
msgstr "简单合并未生效，尝试自动合并。"
-#: git-rebase.sh:56
+#: git-rebase.sh:58
msgid ""
"When you have resolved this problem, run \"git rebase --continue\".\n"
"If you prefer to skip this patch, run \"git rebase --skip\" instead.\n"
"如果您想跳过此补丁，则执行 \"git rebase --skip\"。\n"
"要恢复原分支并停止变基，执行 \"git rebase --abort\"。"
-#: git-rebase.sh:156 git-rebase.sh:395
+#: git-rebase.sh:158 git-rebase.sh:397
#, sh-format
msgid "Could not move back to $head_name"
msgstr "无法移回 $head_name"
-#: git-rebase.sh:167
-msgid "Applied autostash."
-msgstr "成功应用 autostash。"
-
-#: git-rebase.sh:170
+#: git-rebase.sh:172
#, sh-format
msgid "Cannot store $stash_sha1"
msgstr "无法保存 $stash_sha1"
-#: git-rebase.sh:171
-msgid ""
-"Applying autostash resulted in conflicts.\n"
-"Your changes are safe in the stash.\n"
-"You can run \"git stash pop\" or \"git stash drop\" at any time.\n"
-msgstr ""
-"应用 autostash 导致冲突。\n"
-"您的修改安全地保存在 stash 中。\n"
-"您可以在任何时候运行 \"git stash pop\" 或 \"git stash drop\"。\n"
-
-#: git-rebase.sh:210
+#: git-rebase.sh:212
msgid "The pre-rebase hook refused to rebase."
msgstr "钩子 pre-rebase 拒绝变基操作。"
-#: git-rebase.sh:215
+#: git-rebase.sh:217
msgid "It looks like git-am is in progress. Cannot rebase."
msgstr "似乎正处于在 git-am 的执行过程中。无法变基。"
-#: git-rebase.sh:356
+#: git-rebase.sh:358
msgid "No rebase in progress?"
msgstr "没有正在进行的变基？"
-#: git-rebase.sh:367
+#: git-rebase.sh:369
msgid "The --edit-todo action can only be used during interactive rebase."
msgstr "动作 --edit-todo 只能用在交互式变基过程中。"
-#: git-rebase.sh:374
+#: git-rebase.sh:376
msgid "Cannot read HEAD"
msgstr "不能读取 HEAD"
-#: git-rebase.sh:377
+#: git-rebase.sh:379
msgid ""
"You must edit all merge conflicts and then\n"
"mark them as resolved using git add"
"您必须编辑所有的合并冲突，然后通过 git add\n"
"命令将它们标记为已解决"
-#: git-rebase.sh:414
+#: git-rebase.sh:419
#, sh-format
msgid ""
"It seems that there is already a $state_dir_base directory, and\n"
"\t$cmd_clear_stale_rebase\n"
"然后再重新执行变基操作。 为避免丢失重要数据，我已经停止当前操作。"
-#: git-rebase.sh:465
+#: git-rebase.sh:470
#, sh-format
msgid "invalid upstream $upstream_name"
msgstr "无效的上游 $upstream_name"
-#: git-rebase.sh:489
+#: git-rebase.sh:494
#, sh-format
msgid "$onto_name: there are more than one merge bases"
msgstr "$onto_name: 有一个以上的合并基准"
-#: git-rebase.sh:492 git-rebase.sh:496
+#: git-rebase.sh:497 git-rebase.sh:501
#, sh-format
msgid "$onto_name: there is no merge base"
msgstr "$onto_name: 没有合并基准"
-#: git-rebase.sh:501
+#: git-rebase.sh:506
#, sh-format
msgid "Does not point to a valid commit: $onto_name"
msgstr "没有指向一个有效的提交：$onto_name"
-#: git-rebase.sh:524
+#: git-rebase.sh:529
#, sh-format
msgid "fatal: no such branch: $branch_name"
msgstr "严重错误：无此分支：$branch_name"
-#: git-rebase.sh:557
+#: git-rebase.sh:562
msgid "Cannot autostash"
msgstr "无法 autostash"
-#: git-rebase.sh:562
+#: git-rebase.sh:567
#, sh-format
msgid "Created autostash: $stash_abbrev"
msgstr "创建了 autostash: $stash_abbrev"
-#: git-rebase.sh:566
+#: git-rebase.sh:571
msgid "Please commit or stash them."
msgstr "请提交或为它们保存进度。"
-#: git-rebase.sh:586
+#: git-rebase.sh:591
#, sh-format
msgid "Current branch $branch_name is up to date."
msgstr "当前分支 $branch_name 是最新的。"
-#: git-rebase.sh:590
+#: git-rebase.sh:595
#, sh-format
msgid "Current branch $branch_name is up to date, rebase forced."
msgstr "当前分支 $branch_name 是最新的，强制变基。"
-#: git-rebase.sh:601
+#: git-rebase.sh:606
#, sh-format
msgid "Changes from $mb to $onto:"
msgstr "变更从 $mb 到 $onto："
-#: git-rebase.sh:610
+#: git-rebase.sh:615
msgid "First, rewinding head to replay your work on top of it..."
msgstr "首先，回退分支以便在上面重放您的工作..."
-#: git-rebase.sh:620
+#: git-rebase.sh:625
#, sh-format
msgid "Fast-forwarded $branch_name to $onto_name."
msgstr "快进 $branch_name 至 $onto_name。"
-#: git-stash.sh:50
+#: git-stash.sh:53
msgid "git stash clear with parameters is unimplemented"
msgstr "git stash clear 不支持参数"
-#: git-stash.sh:73
+#: git-stash.sh:94
msgid "You do not have the initial commit yet"
msgstr "您尚未建立初始提交"
-#: git-stash.sh:88
+#: git-stash.sh:109
msgid "Cannot save the current index state"
msgstr "无法保存当前索引状态"
-#: git-stash.sh:103
+#: git-stash.sh:124
msgid "Cannot save the untracked files"
msgstr "无法保存未跟踪文件"
-#: git-stash.sh:123 git-stash.sh:136
+#: git-stash.sh:144 git-stash.sh:157
msgid "Cannot save the current worktree state"
msgstr "无法保存当前工作区状态"
-#: git-stash.sh:140
+#: git-stash.sh:161
msgid "No changes selected"
msgstr "没有选择变更"
-#: git-stash.sh:143
+#: git-stash.sh:164
msgid "Cannot remove temporary index (can't happen)"
msgstr "无法删除临时索引（不应发生）"
-#: git-stash.sh:156
+#: git-stash.sh:177
msgid "Cannot record working tree state"
msgstr "不能记录工作区状态"
-#: git-stash.sh:188
+#: git-stash.sh:209
#, sh-format
msgid "Cannot update $ref_stash with $w_commit"
msgstr "无法用 $w_commit 更新 $ref_stash"
#. $ git stash save --blah-blah 2>&1 | head -n 2
#. error: unknown option for 'stash save': --blah-blah
#. To provide a message, use git stash save -- '--blah-blah'
-#: git-stash.sh:238
+#: git-stash.sh:265
#, sh-format
msgid ""
"error: unknown option for 'stash save': $option\n"
"错误：'stash save' 的未知选项：$option\n"
" 要提供一个描述信息，使用 git stash save -- '$option'"
-#: git-stash.sh:251
+#: git-stash.sh:278
msgid "Can't use --patch and --include-untracked or --all at the same time"
msgstr "不能同时使用参数 --patch 和 --include-untracked 或 --all"
-#: git-stash.sh:259
+#: git-stash.sh:286
msgid "No local changes to save"
msgstr "没有要保存的本地修改"
-#: git-stash.sh:263
+#: git-stash.sh:291
msgid "Cannot initialize stash"
msgstr "无法初始化 stash"
-#: git-stash.sh:267
+#: git-stash.sh:295
msgid "Cannot save the current status"
msgstr "无法保存当前状态"
-#: git-stash.sh:268
+#: git-stash.sh:296
#, sh-format
msgid "Saved working directory and index state $stash_msg"
msgstr "保存工作目录和索引状态 $stash_msg"
-#: git-stash.sh:285
+#: git-stash.sh:323
msgid "Cannot remove worktree changes"
msgstr "无法删除工作区变更"
-#: git-stash.sh:403
+#: git-stash.sh:471
#, sh-format
msgid "unknown option: $opt"
msgstr "未知选项: $opt"
-#: git-stash.sh:416
+#: git-stash.sh:484
msgid "No stash found."
msgstr "未发现 stash。"
-#: git-stash.sh:423
+#: git-stash.sh:491
#, sh-format
msgid "Too many revisions specified: $REV"
msgstr "指定了太多的版本：$REV"
-#: git-stash.sh:438
+#: git-stash.sh:506
#, sh-format
msgid "$reference is not a valid reference"
msgstr "$reference 不是一个有效的引用"
-#: git-stash.sh:466
+#: git-stash.sh:534
#, sh-format
msgid "'$args' is not a stash-like commit"
msgstr "'$args' 不是 stash 样提交"
-#: git-stash.sh:477
+#: git-stash.sh:545
#, sh-format
msgid "'$args' is not a stash reference"
msgstr "'$args' 不是一个 stash 引用"
-#: git-stash.sh:485
+#: git-stash.sh:553
msgid "unable to refresh index"
msgstr "无法刷新索引"
-#: git-stash.sh:489
+#: git-stash.sh:557
msgid "Cannot apply a stash in the middle of a merge"
msgstr "无法在合并过程中恢复进度"
-#: git-stash.sh:497
+#: git-stash.sh:565
msgid "Conflicts in index. Try without --index."
msgstr "索引中有冲突。尝试不使用 --index。"
-#: git-stash.sh:499
+#: git-stash.sh:567
msgid "Could not save index tree"
msgstr "不能保存索引树"
-#: git-stash.sh:508
+#: git-stash.sh:576
msgid "Could not restore untracked files from stash"
msgstr "无法从进度保存中恢复未跟踪文件"
-#: git-stash.sh:533
+#: git-stash.sh:601
msgid "Cannot unstage modified files"
msgstr "无法将修改的文件取消暂存"
-#: git-stash.sh:548
+#: git-stash.sh:616
msgid "Index was not unstashed."
msgstr "索引的进度没有被恢复。"
-#: git-stash.sh:562
+#: git-stash.sh:630
msgid "The stash is kept in case you need it again."
msgstr "暂存被保留以备您再次需要。"
-#: git-stash.sh:571
+#: git-stash.sh:639
#, sh-format
msgid "Dropped ${REV} ($s)"
msgstr "丢弃了 ${REV} ($s)"
-#: git-stash.sh:572
+#: git-stash.sh:640
#, sh-format
msgid "${REV}: Could not drop stash entry"
msgstr "${REV}：不能丢弃进度条目"
-#: git-stash.sh:580
+#: git-stash.sh:648
msgid "No branch name specified"
msgstr "未指定分支名"
-#: git-stash.sh:652
+#: git-stash.sh:727
msgid "(To restore them type \"git stash apply\")"
msgstr "（为恢复数据输入 \"git stash apply\"）"
-#: git-submodule.sh:184
+#: git-submodule.sh:181
msgid "Relative path can only be used from the toplevel of the working tree"
msgstr "只能在工作区的顶级目录中使用相对路径"
-#: git-submodule.sh:194
+#: git-submodule.sh:191
#, sh-format
msgid "repo URL: '$repo' must be absolute or begin with ./|../"
msgstr "仓库 URL：'$repo' 必须是绝对路径或以 ./|../ 起始"
-#: git-submodule.sh:211
+#: git-submodule.sh:210
#, sh-format
msgid "'$sm_path' already exists in the index"
msgstr "'$sm_path' 已经存在于索引中"
-#: git-submodule.sh:215
+#: git-submodule.sh:213
+#, sh-format
+msgid "'$sm_path' already exists in the index and is not a submodule"
+msgstr "'$sm_path' 已经存在于索引中且不是一个子模组"
+
+#: git-submodule.sh:218
#, sh-format
msgid ""
"The following path is ignored by one of your .gitignore files:\n"
"$sm_path\n"
"如果您确实想添加它，使用 -f 参数。"
-#: git-submodule.sh:233
+#: git-submodule.sh:236
#, sh-format
msgid "Adding existing repo at '$sm_path' to the index"
msgstr "添加位于 '$sm_path' 的现存仓库到索引"
-#: git-submodule.sh:235
+#: git-submodule.sh:238
#, sh-format
msgid "'$sm_path' already exists and is not a valid git repo"
msgstr "'$sm_path' 已存在且不是一个有效的 git 仓库"
-#: git-submodule.sh:243
+#: git-submodule.sh:246
#, sh-format
msgid "A git directory for '$sm_name' is found locally with remote(s):"
msgstr "本地发现 '$sm_name' 的一个 git 目录，与其对应的远程仓库："
-#: git-submodule.sh:245
+#: git-submodule.sh:248
#, sh-format
msgid ""
"If you want to reuse this local git directory instead of cloning again from\n"
"使用 '--force' 选项。如果本地 git 目录不是正确的仓库\n"
"或者您不确定这里的含义，使用 '--name' 选项选择另外的名称。"
-#: git-submodule.sh:251
+#: git-submodule.sh:254
#, sh-format
msgid "Reactivating local git directory for submodule '$sm_name'."
msgstr "激活本地 git 目录到子模组 '$sm_name'。"
-#: git-submodule.sh:263
+#: git-submodule.sh:266
#, sh-format
msgid "Unable to checkout submodule '$sm_path'"
msgstr "不能检出子模组 '$sm_path'"
-#: git-submodule.sh:268
+#: git-submodule.sh:271
#, sh-format
msgid "Failed to add submodule '$sm_path'"
msgstr "无法添加子模组 '$sm_path'"
-#: git-submodule.sh:277
+#: git-submodule.sh:280
#, sh-format
msgid "Failed to register submodule '$sm_path'"
msgstr "无法注册子模组 '$sm_path'"
-#: git-submodule.sh:324
+#: git-submodule.sh:341
#, sh-format
msgid "Entering '$displaypath'"
msgstr "正在进入 '$displaypath'"
-#: git-submodule.sh:344
+#: git-submodule.sh:361
#, sh-format
msgid "Stopping at '$displaypath'; script returned non-zero status."
msgstr "停止于 '$displaypath'；脚本返回非零值。"
-#: git-submodule.sh:415
+#: git-submodule.sh:432
#, sh-format
msgid "pathspec and --all are incompatible"
msgstr "pathspec 和 --all 不兼容"
-#: git-submodule.sh:420
+#: git-submodule.sh:437
#, sh-format
msgid "Use '--all' if you really want to deinitialize all submodules"
msgstr "如果您确实想要对所有子模组执行取消初始化，请使用 '--all'"
-#: git-submodule.sh:440
+#: git-submodule.sh:457
#, sh-format
msgid ""
"Submodule work tree '$displaypath' contains a .git directory\n"
"子模组工作区 '$displaypath' 包含一个 .git 目录\n"
"（如果您真的想删除它及其全部历史，使用 'rm -rf' 命令）"
-#: git-submodule.sh:448
+#: git-submodule.sh:465
#, sh-format
msgid ""
"Submodule work tree '$displaypath' contains local modifications; use '-f' to "
"discard them"
msgstr "子模组工作区 '$displaypath' 包含本地修改；使用 '-f' 丢弃它们"
-#: git-submodule.sh:451
+#: git-submodule.sh:468
#, sh-format
msgid "Cleared directory '$displaypath'"
msgstr "已清除目录 '$displaypath'"
-#: git-submodule.sh:452
+#: git-submodule.sh:469
#, sh-format
msgid "Could not remove submodule work tree '$displaypath'"
msgstr "无法移除子模组工作区 '$displaypath'"
-#: git-submodule.sh:455
+#: git-submodule.sh:472
#, sh-format
msgid "Could not create empty submodule directory '$displaypath'"
msgstr "不能创建空的子模组目录 '$displaypath'"
-#: git-submodule.sh:464
+#: git-submodule.sh:481
#, sh-format
msgid "Submodule '$name' ($url) unregistered for path '$displaypath'"
msgstr "子模组 '$name' ($url) 未对路径 '$displaypath' 注册"
-#: git-submodule.sh:617
+#: git-submodule.sh:637
#, sh-format
msgid "Unable to find current revision in submodule path '$displaypath'"
msgstr "无法在子模组路径 '$displaypath' 中找到当前版本"
-#: git-submodule.sh:627
+#: git-submodule.sh:647
#, sh-format
msgid "Unable to fetch in submodule path '$sm_path'"
msgstr "无法在子模组路径 '$sm_path' 中获取"
-#: git-submodule.sh:632
+#: git-submodule.sh:652
#, sh-format
msgid ""
"Unable to find current ${remote_name}/${branch} revision in submodule path "
"'$sm_path'"
msgstr "无法在子模组路径 '$sm_path' 中找到当前版本 ${remote_name}/${branch}"
-#: git-submodule.sh:650
+#: git-submodule.sh:670
#, sh-format
msgid "Unable to fetch in submodule path '$displaypath'"
msgstr "无法在子模组路径 '$displaypath' 中获取"
-#: git-submodule.sh:656
+#: git-submodule.sh:676
#, sh-format
msgid ""
"Fetched in submodule path '$displaypath', but it did not contain $sha1. "
msgstr ""
"获取了子模组路径 '$displaypath'，但是它没有包含 $sha1。直接获取该提交失败。"
-#: git-submodule.sh:663
+#: git-submodule.sh:683
#, sh-format
msgid "Unable to checkout '$sha1' in submodule path '$displaypath'"
msgstr "无法在子模组路径 '$displaypath' 中检出 '$sha1'"
-#: git-submodule.sh:664
+#: git-submodule.sh:684
#, sh-format
msgid "Submodule path '$displaypath': checked out '$sha1'"
msgstr "子模组路径 '$displaypath'：检出 '$sha1'"
-#: git-submodule.sh:668
+#: git-submodule.sh:688
#, sh-format
msgid "Unable to rebase '$sha1' in submodule path '$displaypath'"
msgstr "无法在子模组路径 '$displaypath' 中变基 '$sha1'"
-#: git-submodule.sh:669
+#: git-submodule.sh:689
#, sh-format
msgid "Submodule path '$displaypath': rebased into '$sha1'"
msgstr "子模组路径 '$displaypath'：变基至 '$sha1'"
-#: git-submodule.sh:674
+#: git-submodule.sh:694
#, sh-format
msgid "Unable to merge '$sha1' in submodule path '$displaypath'"
msgstr "无法合并 '$sha1' 到子模组路径 '$displaypath' 中"
-#: git-submodule.sh:675
+#: git-submodule.sh:695
#, sh-format
msgid "Submodule path '$displaypath': merged in '$sha1'"
msgstr "子模组路径 '$displaypath'：已合并入 '$sha1'"
-#: git-submodule.sh:680
+#: git-submodule.sh:700
#, sh-format
msgid "Execution of '$command $sha1' failed in submodule path '$displaypath'"
msgstr "在子模组 '$displaypath' 中执行 '$command $sha1' 失败"
-#: git-submodule.sh:681
+#: git-submodule.sh:701
#, sh-format
msgid "Submodule path '$displaypath': '$command $sha1'"
msgstr "子模组 '$displaypath'：'$command $sha1'"
-#: git-submodule.sh:712
+#: git-submodule.sh:732
#, sh-format
msgid "Failed to recurse into submodule path '$displaypath'"
msgstr "无法递归进子模组路径 '$displaypath'"
-#: git-submodule.sh:820
+#: git-submodule.sh:840
msgid "The --cached option cannot be used with the --files option"
msgstr "选项 --cached 不能和选项 --files 同时使用"
-#: git-submodule.sh:872
+#: git-submodule.sh:892
#, sh-format
msgid "unexpected mode $mod_dst"
msgstr "意外的模式 $mod_dst"
# 译者：注意保持前导空格
-#: git-submodule.sh:892
+#: git-submodule.sh:912
#, sh-format
msgid " Warn: $display_name doesn't contain commit $sha1_src"
msgstr " 警告：$display_name 未包含提交 $sha1_src"
# 译者：注意保持前导空格
-#: git-submodule.sh:895
+#: git-submodule.sh:915
#, sh-format
msgid " Warn: $display_name doesn't contain commit $sha1_dst"
msgstr " 警告：$display_name 未包含提交 $sha1_dst"
# 译者：注意保持前导空格
-#: git-submodule.sh:898
+#: git-submodule.sh:918
#, sh-format
msgid " Warn: $display_name doesn't contain commits $sha1_src and $sha1_dst"
msgstr " 警告：$display_name 未包含提交 $sha1_src 和 $sha1_dst"
-#: git-submodule.sh:1045
+#: git-submodule.sh:1064
#, sh-format
msgid "Failed to recurse into submodule path '$sm_path'"
msgstr "无法递归进子模组路径 '$sm_path'"
-#: git-submodule.sh:1112
+#: git-submodule.sh:1136
#, sh-format
msgid "Synchronizing submodule url for '$displaypath'"
msgstr "为 '$displaypath' 同步子模组 url"
msgid "See git-${cmd}(1) for details."
msgstr "详见 git-${cmd}(1)。"
-#: git-rebase--interactive.sh:131
+#: git-rebase--interactive.sh:140
#, sh-format
msgid "Rebasing ($new_count/$total)"
msgstr "变基中（$new_count/$total）"
-#: git-rebase--interactive.sh:147
+#: git-rebase--interactive.sh:156
msgid ""
"\n"
"Commands:\n"
"这些行可以被重新排序；它们会被从上至下地执行。\n"
"\n"
-#: git-rebase--interactive.sh:162
+#: git-rebase--interactive.sh:171
msgid ""
"\n"
"Do not remove any line. Use 'drop' explicitly to remove a commit.\n"
"\n"
"不要删除任意一行。使用 'drop' 显式地删除一个提交。\n"
-#: git-rebase--interactive.sh:166
+#: git-rebase--interactive.sh:175
msgid ""
"\n"
"If you remove a line here THAT COMMIT WILL BE LOST.\n"
"\n"
"如果您在这里删除一行，对应的提交将会丢失。\n"
-#: git-rebase--interactive.sh:202
+#: git-rebase--interactive.sh:211
#, sh-format
msgid ""
"You can amend the commit now, with\n"
"\n"
"\tgit rebase --continue"
-#: git-rebase--interactive.sh:227
+#: git-rebase--interactive.sh:236
#, sh-format
msgid "$sha1: not a commit that can be picked"
msgstr "$sha1：不是一个可以被拣选的提交"
-#: git-rebase--interactive.sh:266
+#: git-rebase--interactive.sh:275
#, sh-format
msgid "Invalid commit name: $sha1"
msgstr "无效的提交名：$sha1"
-#: git-rebase--interactive.sh:308
+#: git-rebase--interactive.sh:317
msgid "Cannot write current commit's replacement sha1"
msgstr "不能写入当前提交的替代 sha1"
-#: git-rebase--interactive.sh:360
+#: git-rebase--interactive.sh:369
#, sh-format
msgid "Fast-forward to $sha1"
msgstr "快进到 $sha1"
-#: git-rebase--interactive.sh:362
+#: git-rebase--interactive.sh:371
#, sh-format
msgid "Cannot fast-forward to $sha1"
msgstr "不能快进到 $sha1"
-#: git-rebase--interactive.sh:371
+#: git-rebase--interactive.sh:380
#, sh-format
msgid "Cannot move HEAD to $first_parent"
msgstr "不能移动 HEAD 到 $first_parent"
-#: git-rebase--interactive.sh:376
+#: git-rebase--interactive.sh:385
#, sh-format
msgid "Refusing to squash a merge: $sha1"
msgstr "拒绝压缩一个合并：$sha1"
-#: git-rebase--interactive.sh:390
+#: git-rebase--interactive.sh:399
#, sh-format
msgid "Error redoing merge $sha1"
msgstr "无法重做合并 $sha1"
-#: git-rebase--interactive.sh:398
+#: git-rebase--interactive.sh:407
#, sh-format
msgid "Could not pick $sha1"
msgstr "不能拣选 $sha1"
-#: git-rebase--interactive.sh:407
+#: git-rebase--interactive.sh:416
#, sh-format
msgid "This is the commit message #${n}:"
msgstr "这是提交说明 #${n}："
-#: git-rebase--interactive.sh:412
+#: git-rebase--interactive.sh:421
#, sh-format
msgid "The commit message #${n} will be skipped:"
msgstr "提交说明 #${n} 将被跳过："
-#: git-rebase--interactive.sh:423
+#: git-rebase--interactive.sh:432
#, sh-format
msgid "This is a combination of $count commit."
msgid_plural "This is a combination of $count commits."
msgstr[0] "这是一个 $count 个提交的组合。"
msgstr[1] "这是一个 $count 个提交的组合。"
-#: git-rebase--interactive.sh:431
+#: git-rebase--interactive.sh:441
#, sh-format
msgid "Cannot write $fixup_msg"
msgstr "不能写入 $fixup_msg"
-#: git-rebase--interactive.sh:434
+#: git-rebase--interactive.sh:444
msgid "This is a combination of 2 commits."
msgstr "这是一个 2 个提交的组合。"
-#: git-rebase--interactive.sh:435
-msgid "This is the 1st commit message:"
-msgstr "这是第一个提交说明："
-
-#: git-rebase--interactive.sh:475 git-rebase--interactive.sh:518
-#: git-rebase--interactive.sh:521
+#: git-rebase--interactive.sh:485 git-rebase--interactive.sh:528
+#: git-rebase--interactive.sh:531
#, sh-format
msgid "Could not apply $sha1... $rest"
msgstr "不能应用 $sha1... $rest"
-#: git-rebase--interactive.sh:549
+#: git-rebase--interactive.sh:559
#, sh-format
msgid ""
"Could not amend commit after successfully picking $sha1... $rest\n"
"这通常是因为空的提交说明，或者 pre-commit 钩子执行失败。如果是 pre-commit\n"
"钩子执行失败，你可能需要在重写提交说明前解决这个问题。"
-#: git-rebase--interactive.sh:564
+#: git-rebase--interactive.sh:574
#, sh-format
msgid "Stopped at $sha1_abbrev... $rest"
msgstr "停止在 $sha1_abbrev... $rest"
-#: git-rebase--interactive.sh:579
+#: git-rebase--interactive.sh:589
#, sh-format
msgid "Cannot '$squash_style' without a previous commit"
msgstr "没有父提交的情况下不能 '$squash_style'"
-#: git-rebase--interactive.sh:621
+#: git-rebase--interactive.sh:631
#, sh-format
msgid "Executing: $rest"
msgstr "执行：$rest"
-#: git-rebase--interactive.sh:629
+#: git-rebase--interactive.sh:639
#, sh-format
msgid "Execution failed: $rest"
msgstr "执行失败：$rest"
-#: git-rebase--interactive.sh:631
+#: git-rebase--interactive.sh:641
msgid "and made changes to the index and/or the working tree"
msgstr "并且修改索引和/或工作区"
# 译者：注意保持前导空格
-#: git-rebase--interactive.sh:633
+#: git-rebase--interactive.sh:643
msgid ""
"You can fix the problem, and then run\n"
"\n"
"\tgit rebase --continue"
#. TRANSLATORS: after these lines is a command to be issued by the user
-#: git-rebase--interactive.sh:646
+#: git-rebase--interactive.sh:656
#, sh-format
msgid ""
"Execution succeeded: $rest\n"
"\n"
"\tgit rebase --continue"
-#: git-rebase--interactive.sh:657
+#: git-rebase--interactive.sh:667
#, sh-format
msgid "Unknown command: $command $sha1 $rest"
msgstr "未知命令：$command $sha1 $rest"
-#: git-rebase--interactive.sh:658
+#: git-rebase--interactive.sh:668
msgid "Please fix this using 'git rebase --edit-todo'."
msgstr "要修改请使用命令 'git rebase --edit-todo'。"
-#: git-rebase--interactive.sh:693
+#: git-rebase--interactive.sh:703
#, sh-format
msgid "Successfully rebased and updated $head_name."
msgstr "成功变基并更新 $head_name。"
-#: git-rebase--interactive.sh:740
+#: git-rebase--interactive.sh:750
msgid "Could not skip unnecessary pick commands"
msgstr "不能跳过不必要的拣选命令"
-#: git-rebase--interactive.sh:898
+#: git-rebase--interactive.sh:908
#, sh-format
msgid ""
"Warning: the SHA-1 is missing or isn't a commit in the following line:\n"
"警告：缺失 SHA-1 或者在下面一行中不是一个提交：\n"
" - $line"
-#: git-rebase--interactive.sh:931
+#: git-rebase--interactive.sh:941
#, sh-format
msgid ""
"Warning: the command isn't recognized in the following line:\n"
"警告：下面一行中的命令未能被识别：\n"
" - $line"
-#: git-rebase--interactive.sh:970
+#: git-rebase--interactive.sh:980
msgid "could not detach HEAD"
msgstr "不能检出为分离头指针"
-#: git-rebase--interactive.sh:1008
+#: git-rebase--interactive.sh:1018
msgid ""
"Warning: some commits may have been dropped accidentally.\n"
"Dropped commits (newer to older):"
msgstr "警告：一些提交可能被意外丢弃。丢弃的提交（从新到旧）："
-#: git-rebase--interactive.sh:1016
+#: git-rebase--interactive.sh:1026
msgid ""
"To avoid this message, use \"drop\" to explicitly remove a commit.\n"
"\n"
"使用 'git config rebase.missingCommitsCheck' 来修改警告级别。\n"
"可选值有：ignore、warn、error。"
-#: git-rebase--interactive.sh:1027
+#: git-rebase--interactive.sh:1037
#, sh-format
msgid ""
"Unrecognized setting $check_level for option rebase.missingCommitsCheck. "
"Ignoring."
msgstr "选项 rebase.missingCommitsCheck 的值 $check_level 无法被识别。已忽略。"
-#: git-rebase--interactive.sh:1044
+#: git-rebase--interactive.sh:1054
msgid ""
"You can fix this with 'git rebase --edit-todo' and then run 'git rebase --"
"continue'."
msgstr ""
-"您可以用命令 'git rebase --edit-todo' 修正然后执行命令 'git rebase --"
-"continue'。"
+"您可以用 'git rebase --edit-todo' 修正问题然后执行 'git rebase --continue'。"
-#: git-rebase--interactive.sh:1045
+#: git-rebase--interactive.sh:1055
msgid "Or you can abort the rebase with 'git rebase --abort'."
msgstr "或者您可以使用 'git rebase --abort' 命令终止变基操作。"
-#: git-rebase--interactive.sh:1069
+#: git-rebase--interactive.sh:1083
msgid "Could not remove CHERRY_PICK_HEAD"
msgstr "不能删除 CHERRY_PICK_HEAD"
-#: git-rebase--interactive.sh:1074
+#: git-rebase--interactive.sh:1088
#, sh-format
msgid ""
"You have staged changes in your working tree.\n"
"\n"
" git rebase --continue\n"
-#: git-rebase--interactive.sh:1091
+#: git-rebase--interactive.sh:1105
msgid "Error trying to find the author identity to amend commit"
msgstr "在修补提交中查找作者信息时遇到错误"
-#: git-rebase--interactive.sh:1096
+#: git-rebase--interactive.sh:1110
msgid ""
"You have uncommitted changes in your working tree. Please commit them\n"
"first and then run 'git rebase --continue' again."
msgstr ""
"您的工作区中有未提交的变更。请先提交然后再次运行 'git rebase --continue'。"
-#: git-rebase--interactive.sh:1101 git-rebase--interactive.sh:1105
+#: git-rebase--interactive.sh:1115 git-rebase--interactive.sh:1119
msgid "Could not commit staged changes."
msgstr "不能提交暂存的修改。"
-#: git-rebase--interactive.sh:1129
+#: git-rebase--interactive.sh:1147
msgid ""
"\n"
"You are editing the todo file of an ongoing interactive rebase.\n"
" git rebase --continue\n"
"\n"
-#: git-rebase--interactive.sh:1137 git-rebase--interactive.sh:1295
+#: git-rebase--interactive.sh:1155 git-rebase--interactive.sh:1313
msgid "Could not execute editor"
msgstr "无法运行编辑器"
-#: git-rebase--interactive.sh:1150
+#: git-rebase--interactive.sh:1168
#, sh-format
msgid "Could not checkout $switch_to"
msgstr "不能检出 $switch_to"
-#: git-rebase--interactive.sh:1155
+#: git-rebase--interactive.sh:1173
msgid "No HEAD?"
msgstr "没有 HEAD？"
-#: git-rebase--interactive.sh:1156
+#: git-rebase--interactive.sh:1174
#, sh-format
msgid "Could not create temporary $state_dir"
msgstr "不能创建临时 $state_dir"
-#: git-rebase--interactive.sh:1158
+#: git-rebase--interactive.sh:1176
msgid "Could not mark as interactive"
msgstr "不能标记为交互式"
-#: git-rebase--interactive.sh:1168 git-rebase--interactive.sh:1173
+#: git-rebase--interactive.sh:1186 git-rebase--interactive.sh:1191
msgid "Could not init rewritten commits"
msgstr "不能对重写提交进行初始化"
-#: git-rebase--interactive.sh:1273
+#: git-rebase--interactive.sh:1291
#, sh-format
msgid "Rebase $shortrevisions onto $shortonto ($todocount command)"
msgid_plural "Rebase $shortrevisions onto $shortonto ($todocount commands)"
msgstr[0] "变基 $shortrevisions 到 $shortonto（$todocount 个提交）"
msgstr[1] "变基 $shortrevisions 到 $shortonto（$todocount 个提交）"
-#: git-rebase--interactive.sh:1278
+#: git-rebase--interactive.sh:1296
msgid ""
"\n"
"However, if you remove everything, the rebase will be aborted.\n"
"然而，如果您删除全部内容，变基操作将会终止。\n"
"\n"
-#: git-rebase--interactive.sh:1285
+#: git-rebase--interactive.sh:1303
msgid "Note that empty commits are commented out"
msgstr "注意空提交已被注释掉"
msgid "Unable to determine absolute path of git directory"
msgstr "不能确定 git 目录的绝对路径"
+#. TRANSLATORS: you can adjust this to align "git add -i" status menu
+#: git-add--interactive.perl:238
+#, perl-format
+msgid "%12s %12s %s"
+msgstr "%12s %12s %s"
+
+#: git-add--interactive.perl:239
+msgid "staged"
+msgstr "缓存"
+
+#: git-add--interactive.perl:239
+msgid "unstaged"
+msgstr "未缓存"
+
+#: git-add--interactive.perl:288 git-add--interactive.perl:313
+msgid "binary"
+msgstr "二进制"
+
+#: git-add--interactive.perl:297 git-add--interactive.perl:351
+msgid "nothing"
+msgstr "无"
+
+#: git-add--interactive.perl:333 git-add--interactive.perl:348
+msgid "unchanged"
+msgstr "没有修改"
+
+#: git-add--interactive.perl:644
+#, perl-format
+msgid "added %d path\n"
+msgid_plural "added %d paths\n"
+msgstr[0] "增加了 %d 个路径\n"
+msgstr[1] "增加了 %d 个路径\n"
+
+#: git-add--interactive.perl:647
+#, perl-format
+msgid "updated %d path\n"
+msgid_plural "updated %d paths\n"
+msgstr[0] "更新了 %d 个路径\n"
+msgstr[1] "更新了 %d 个路径\n"
+
+#: git-add--interactive.perl:650
+#, perl-format
+msgid "reverted %d path\n"
+msgid_plural "reverted %d paths\n"
+msgstr[0] "还原了 %d 个路径\n"
+msgstr[1] "还原了 %d 个路径\n"
+
+#: git-add--interactive.perl:653
+#, perl-format
+msgid "touched %d path\n"
+msgid_plural "touched %d paths\n"
+msgstr[0] "触碰了 %d 个路径\n"
+msgstr[1] "触碰了 %d 个路径\n"
+
+#: git-add--interactive.perl:662
+msgid "Update"
+msgstr "更新"
+
+#: git-add--interactive.perl:674
+msgid "Revert"
+msgstr "还原"
+
+#: git-add--interactive.perl:697
+#, perl-format
+msgid "note: %s is untracked now.\n"
+msgstr "说明：%s 现已成为未跟踪的。\n"
+
+#: git-add--interactive.perl:708
+msgid "Add untracked"
+msgstr "添加未跟踪的"
+
+#: git-add--interactive.perl:714
+msgid "No untracked files.\n"
+msgstr "没有未跟踪的文件。\n"
+
+#: git-add--interactive.perl:1030
+msgid ""
+"If the patch applies cleanly, the edited hunk will immediately be\n"
+"marked for staging."
+msgstr "如果补丁能干净地应用，编辑块将立即标记为暂存。"
+
+#: git-add--interactive.perl:1033
+msgid ""
+"If the patch applies cleanly, the edited hunk will immediately be\n"
+"marked for stashing."
+msgstr "如果补丁能干净地应用，编辑块将立即标记为保存进度。"
+
+#: git-add--interactive.perl:1036
+msgid ""
+"If the patch applies cleanly, the edited hunk will immediately be\n"
+"marked for unstaging."
+msgstr "如果补丁能干净地应用，编辑块将立即标记为未暂存。"
+
+#: git-add--interactive.perl:1039 git-add--interactive.perl:1048
+msgid ""
+"If the patch applies cleanly, the edited hunk will immediately be\n"
+"marked for applying."
+msgstr "如果补丁能干净地应用，编辑块将立即标记为应用。"
+
+#: git-add--interactive.perl:1042 git-add--interactive.perl:1045
+msgid ""
+"If the patch applies cleanly, the edited hunk will immediately be\n"
+"marked for discarding."
+msgstr "如果补丁能干净地应用，编辑块将立即标记为丢弃。"
+
+#: git-add--interactive.perl:1058
+#, perl-format
+msgid "failed to open hunk edit file for writing: %s"
+msgstr "无法写入块编辑文件：%s"
+
+#: git-add--interactive.perl:1059
+msgid "Manual hunk edit mode -- see bottom for a quick guide.\n"
+msgstr "手动块编辑模式 -- 查看底部的快速指南。\n"
+
+#: git-add--interactive.perl:1065
+#, perl-format
+msgid ""
+"---\n"
+"To remove '%s' lines, make them ' ' lines (context).\n"
+"To remove '%s' lines, delete them.\n"
+"Lines starting with %s will be removed.\n"
+msgstr ""
+"---\n"
+"要删除 '%s' 开始的行，使其成为 ' ' 开始的行（上下文）。\n"
+"要删除 '%s' 开始的行，删除它们。\n"
+"以 %s 开始的行将被删除。\n"
+
+#. TRANSLATORS: 'it' refers to the patch mentioned in the previous messages.
+#: git-add--interactive.perl:1073
+msgid ""
+"If it does not apply cleanly, you will be given an opportunity to\n"
+"edit again. If all lines of the hunk are removed, then the edit is\n"
+"aborted and the hunk is left unchanged.\n"
+msgstr ""
+"如果不能干净地应用，您将有机会重新编辑。如果该块的全部内容删除，则\n"
+"此次编辑被终止，该块不会被修改。\n"
+
+#: git-add--interactive.perl:1087
+#, perl-format
+msgid "failed to open hunk edit file for reading: %s"
+msgstr "无法读取块编辑文件：%s"
+
+#. TRANSLATORS: do not translate [y/n]
+#. The program will only accept that input
+#. at this point.
+#. Consider translating (saying "no" discards!) as
+#. (saying "n" for "no" discards!) if the translation
+#. of the word "no" does not start with n.
+#: git-add--interactive.perl:1178
+msgid ""
+"Your edited hunk does not apply. Edit again (saying \"no\" discards!) [y/n]? "
+msgstr "您的编辑块不能被应用。重新编辑（选择 \"no\" 丢弃！） [y/n]? "
+
+#: git-add--interactive.perl:1187
+msgid ""
+"y - stage this hunk\n"
+"n - do not stage this hunk\n"
+"q - quit; do not stage this hunk or any of the remaining ones\n"
+"a - stage this hunk and all later hunks in the file\n"
+"d - do not stage this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 暂存该块\n"
+"n - 不要暂存该块\n"
+"q - 退出。不暂存该块及后面的全部块\n"
+"a - 暂存该块和本文件中后面的全部块\n"
+"d - 不暂存该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1193
+msgid ""
+"y - stash this hunk\n"
+"n - do not stash this hunk\n"
+"q - quit; do not stash this hunk or any of the remaining ones\n"
+"a - stash this hunk and all later hunks in the file\n"
+"d - do not stash this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 贮藏该块\n"
+"n - 不要贮藏该块\n"
+"q - 退出。不贮藏该块及后面的全部块\n"
+"a - 贮藏该块和本文件中后面的全部块\n"
+"d - 不贮藏该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1199
+msgid ""
+"y - unstage this hunk\n"
+"n - do not unstage this hunk\n"
+"q - quit; do not unstage this hunk or any of the remaining ones\n"
+"a - unstage this hunk and all later hunks in the file\n"
+"d - do not unstage this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 不暂存该块\n"
+"n - 不要不暂存该块\n"
+"q - 退出。不要不暂存该块及后面的全部块\n"
+"a - 不暂存该块和本文件中后面的全部块\n"
+"d - 不要不暂存该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1205
+msgid ""
+"y - apply this hunk to index\n"
+"n - do not apply this hunk to index\n"
+"q - quit; do not apply this hunk or any of the remaining ones\n"
+"a - apply this hunk and all later hunks in the file\n"
+"d - do not apply this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 在索引中应用该块\n"
+"n - 不要在索引中应用该块\n"
+"q - 退出。不要应用该块及后面的全部块\n"
+"a - 应用该块和本文件中后面的全部块\n"
+"d - 不要应用该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1211
+msgid ""
+"y - discard this hunk from worktree\n"
+"n - do not discard this hunk from worktree\n"
+"q - quit; do not discard this hunk or any of the remaining ones\n"
+"a - discard this hunk and all later hunks in the file\n"
+"d - do not discard this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 在工作区中丢弃该块\n"
+"n - 不要在工作区中丢弃该块\n"
+"q - 退出。不要丢弃该块及后面的全部块\n"
+"a - 丢弃该块和本文件中后面的全部块\n"
+"d - 不要丢弃该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1217
+msgid ""
+"y - discard this hunk from index and worktree\n"
+"n - do not discard this hunk from index and worktree\n"
+"q - quit; do not discard this hunk or any of the remaining ones\n"
+"a - discard this hunk and all later hunks in the file\n"
+"d - do not discard this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 在索引和工作区中丢弃该块\n"
+"n - 不要在索引和工作区中丢弃该块\n"
+"q - 退出。不要丢弃该块及后面的全部块\n"
+"a - 丢弃该块和本文件中后面的全部块\n"
+"d - 不要丢弃该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1223
+msgid ""
+"y - apply this hunk to index and worktree\n"
+"n - do not apply this hunk to index and worktree\n"
+"q - quit; do not apply this hunk or any of the remaining ones\n"
+"a - apply this hunk and all later hunks in the file\n"
+"d - do not apply this hunk or any of the later hunks in the file"
+msgstr ""
+"y - 在索引和工作区中应用该块\n"
+"n - 不要在索引和工作区中应用该块\n"
+"q - 退出。不要应用该块及后面的全部块\n"
+"a - 应用该块和本文件中后面的全部块\n"
+"d - 不要应用该块和本文件中后面的全部块"
+
+#: git-add--interactive.perl:1232
+msgid ""
+"g - select a hunk to go to\n"
+"/ - search for a hunk matching the given regex\n"
+"j - leave this hunk undecided, see next undecided hunk\n"
+"J - leave this hunk undecided, see next hunk\n"
+"k - leave this hunk undecided, see previous undecided hunk\n"
+"K - leave this hunk undecided, see previous hunk\n"
+"s - split the current hunk into smaller hunks\n"
+"e - manually edit the current hunk\n"
+"? - print help\n"
+msgstr ""
+"g - 选择跳转到一个块\n"
+"/ - 查找和给定正则表达式匹配的块\n"
+"j - 维持该块未决状态，查看下一个未决块\n"
+"J - 维持该块未决状态，查看下一个块\n"
+"k - 维持该块未决状态，查看上一个未决块\n"
+"K - 维持该块未决状态，查看上一个块\n"
+"s - 拆分当前块为更小的块\n"
+"e - 手动编辑当前块\n"
+"? - 显示帮助\n"
+
+#: git-add--interactive.perl:1263
+msgid "The selected hunks do not apply to the index!\n"
+msgstr "选中的块不能应用到索引！\n"
+
+#: git-add--interactive.perl:1264
+msgid "Apply them to the worktree anyway? "
+msgstr "无论如何都要应用到工作区么？"
+
+#: git-add--interactive.perl:1267
+msgid "Nothing was applied.\n"
+msgstr "未应用。\n"
+
+#: git-add--interactive.perl:1278
+#, perl-format
+msgid "ignoring unmerged: %s\n"
+msgstr "忽略未合入的：%s\n"
+
+#: git-add--interactive.perl:1287
+msgid "Only binary files changed.\n"
+msgstr "只有二进制文件被修改。\n"
+
+#: git-add--interactive.perl:1289
+msgid "No changes.\n"
+msgstr "没有修改。\n"
+
+#: git-add--interactive.perl:1297
+msgid "Patch update"
+msgstr "补丁更新"
+
+#: git-add--interactive.perl:1349
+#, perl-format
+msgid "Stage mode change [y,n,q,a,d,/%s,?]? "
+msgstr "暂存状态修改 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1350
+#, perl-format
+msgid "Stage deletion [y,n,q,a,d,/%s,?]? "
+msgstr "暂存状态删除 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1351
+#, perl-format
+msgid "Stage this hunk [y,n,q,a,d,/%s,?]? "
+msgstr "暂存该块 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1354
+#, perl-format
+msgid "Stash mode change [y,n,q,a,d,/%s,?]? "
+msgstr "贮藏状态修改 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1355
+#, perl-format
+msgid "Stash deletion [y,n,q,a,d,/%s,?]? "
+msgstr "贮藏状态删除 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1356
+#, perl-format
+msgid "Stash this hunk [y,n,q,a,d,/%s,?]? "
+msgstr "贮藏该块 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1359
+#, perl-format
+msgid "Unstage mode change [y,n,q,a,d,/%s,?]? "
+msgstr "未暂存状态修改 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1360
+#, perl-format
+msgid "Unstage deletion [y,n,q,a,d,/%s,?]? "
+msgstr "未暂存状态删除 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1361
+#, perl-format
+msgid "Unstage this hunk [y,n,q,a,d,/%s,?]? "
+msgstr "不暂存该块 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1364
+#, perl-format
+msgid "Apply mode change to index [y,n,q,a,d,/%s,?]? "
+msgstr "修改索引中的应用状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1365
+#, perl-format
+msgid "Apply deletion to index [y,n,q,a,d,/%s,?]? "
+msgstr "从索引中删除应用状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1366
+#, perl-format
+msgid "Apply this hunk to index [y,n,q,a,d,/%s,?]? "
+msgstr "将此块应用到索引 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1369
+#, perl-format
+msgid "Discard mode change from worktree [y,n,q,a,d,/%s,?]? "
+msgstr "修改工作区中的丢弃状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1370
+#, perl-format
+msgid "Discard deletion from worktree [y,n,q,a,d,/%s,?]? "
+msgstr "从工作区中删除丢弃状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1371
+#, perl-format
+msgid "Discard this hunk from worktree [y,n,q,a,d,/%s,?]? "
+msgstr "从工作区中丢弃该块 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1374
+#, perl-format
+msgid "Discard mode change from index and worktree [y,n,q,a,d,/%s,?]? "
+msgstr "修改索引和工作区中的丢弃状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1375
+#, perl-format
+msgid "Discard deletion from index and worktree [y,n,q,a,d,/%s,?]? "
+msgstr "从索引和工作区中删除丢弃状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1376
+#, perl-format
+msgid "Discard this hunk from index and worktree [y,n,q,a,d,/%s,?]? "
+msgstr "从索引和工作区中丢弃该块 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1379
+#, perl-format
+msgid "Apply mode change to index and worktree [y,n,q,a,d,/%s,?]? "
+msgstr "修改索引和工作区中的应用状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1380
+#, perl-format
+msgid "Apply deletion to index and worktree [y,n,q,a,d,/%s,?]? "
+msgstr "从索引和工作区中删除应用状态 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1381
+#, perl-format
+msgid "Apply this hunk to index and worktree [y,n,q,a,d,/%s,?]? "
+msgstr "在索引和工作区中应用该块 [y,n,q,a,d,/%s,?]? "
+
+#: git-add--interactive.perl:1484
+msgid "go to which hunk (<ret> to see more)? "
+msgstr "跳转到哪个块（<回车> 查看更多）？ "
+
+#: git-add--interactive.perl:1486
+msgid "go to which hunk? "
+msgstr "跳转到哪个块？"
+
+#: git-add--interactive.perl:1495
+#, perl-format
+msgid "Invalid number: '%s'\n"
+msgstr "无效数字：'%s'\n"
+
+#: git-add--interactive.perl:1500
+#, perl-format
+msgid "Sorry, only %d hunk available.\n"
+msgid_plural "Sorry, only %d hunks available.\n"
+msgstr[0] "对不起，只有 %d 个可用块。\n"
+msgstr[1] "对不起，只有 %d 个可用块。\n"
+
+#: git-add--interactive.perl:1526
+msgid "search for regex? "
+msgstr "使用正则表达式搜索？"
+
+#: git-add--interactive.perl:1539
+#, perl-format
+msgid "Malformed search regexp %s: %s\n"
+msgstr "错误的正则表达式 %s：%s\n"
+
+#: git-add--interactive.perl:1549
+msgid "No hunk matches the given pattern\n"
+msgstr "没有和给定模式相匹配的快\n"
+
+#: git-add--interactive.perl:1561 git-add--interactive.perl:1583
+msgid "No previous hunk\n"
+msgstr "没有前一个块\n"
+
+#: git-add--interactive.perl:1570 git-add--interactive.perl:1589
+msgid "No next hunk\n"
+msgstr "没有下一个块\n"
+
+#: git-add--interactive.perl:1597
+#, perl-format
+msgid "Split into %d hunk.\n"
+msgid_plural "Split into %d hunks.\n"
+msgstr[0] "拆分为 %d 块。\n"
+msgstr[1] "拆分为 %d 块。\n"
+
+#: git-add--interactive.perl:1649
+msgid "Review diff"
+msgstr "检视 diff"
+
+#. TRANSLATORS: please do not translate the command names
+#. 'status', 'update', 'revert', etc.
+#: git-add--interactive.perl:1668
+msgid ""
+"status - show paths with changes\n"
+"update - add working tree state to the staged set of changes\n"
+"revert - revert staged set of changes back to the HEAD version\n"
+"patch - pick hunks and update selectively\n"
+"diff - view diff between HEAD and index\n"
+"add untracked - add contents of untracked files to the staged set of "
+"changes\n"
+msgstr ""
+"status - 显示含变更的路径\n"
+"update - 添加工作区状态至暂存列表\n"
+"revert - 还原修改的暂存集至 HEAD 版本\n"
+"patch - 挑选块并且有选择地更新\n"
+"diff - 显示 HEAD 和索引间差异\n"
+"add untracked - 添加未跟踪文件的内容至暂存列表\n"
+
+#: git-add--interactive.perl:1685 git-add--interactive.perl:1690
+#: git-add--interactive.perl:1693 git-add--interactive.perl:1700
+#: git-add--interactive.perl:1704 git-add--interactive.perl:1710
+msgid "missing --"
+msgstr "缺失 --"
+
+#: git-add--interactive.perl:1706
+#, perl-format
+msgid "unknown --patch mode: %s"
+msgstr "未知的 --patch 模式：%s"
+
+#: git-add--interactive.perl:1712 git-add--interactive.perl:1718
+#, perl-format
+msgid "invalid argument %s, expecting --"
+msgstr "无效的参数 %s，期望是 --"
+
+#: git-send-email.perl:121
+msgid "local zone differs from GMT by a non-minute interval\n"
+msgstr "本地时间和 GMT 有不到一分钟间隔\n"
+
+#: git-send-email.perl:128 git-send-email.perl:134
+msgid "local time offset greater than or equal to 24 hours\n"
+msgstr "本地时间偏移量大于等于 24 小时\n"
+
+#: git-send-email.perl:202 git-send-email.perl:208
+msgid "the editor exited uncleanly, aborting everything"
+msgstr "编辑器非正常退出，终止所有操作"
+
+#: git-send-email.perl:282
+#, perl-format
+msgid ""
+"'%s' contains an intermediate version of the email you were composing.\n"
+msgstr "'%s' 包含您正在编写的一个中间版本的邮件。\n"
+
+#: git-send-email.perl:287
+#, perl-format
+msgid "'%s.final' contains the composed email.\n"
+msgstr "'%s.final' 包含编辑的邮件。\n"
+
+#: git-send-email.perl:305
+msgid "--dump-aliases incompatible with other options\n"
+msgstr "--dump-aliases 和其它选项不兼容\n"
+
+#: git-send-email.perl:368 git-send-email.perl:623
+msgid "Cannot run git format-patch from outside a repository\n"
+msgstr "不能在仓库之外运行 git format-patch\n"
+
+#: git-send-email.perl:437
+#, perl-format
+msgid "Unknown --suppress-cc field: '%s'\n"
+msgstr "未知的 --suppress-cc 字段：'%s'\n"
+
+#: git-send-email.perl:466
+#, perl-format
+msgid "Unknown --confirm setting: '%s'\n"
+msgstr "未知的 --confirm 设置：'%s'\n"
+
+#: git-send-email.perl:498
+#, perl-format
+msgid "warning: sendmail alias with quotes is not supported: %s\n"
+msgstr "警告：不支持带引号的 sendmail 别名：%s\n"
+
+#: git-send-email.perl:500
+#, perl-format
+msgid "warning: `:include:` not supported: %s\n"
+msgstr "警告：不支持 `:include:`：%s\n"
+
+#: git-send-email.perl:502
+#, perl-format
+msgid "warning: `/file` or `|pipe` redirection not supported: %s\n"
+msgstr "警告：不支持 `/file` 或 `|pipe` 重定向：%s\n"
+
+#: git-send-email.perl:507
+#, perl-format
+msgid "warning: sendmail line is not recognized: %s\n"
+msgstr "警告：不能识别的 sendmail 行：%s\n"
+
+#: git-send-email.perl:589
+#, perl-format
+msgid ""
+"File '%s' exists but it could also be the range of commits\n"
+"to produce patches for. Please disambiguate by...\n"
+"\n"
+" * Saying \"./%s\" if you mean a file; or\n"
+" * Giving --format-patch option if you mean a range.\n"
+msgstr ""
+"存在文件 '%s' 但是它也可能是一个用于产生补丁列表的提交范围。请用如下方法消除"
+"歧义：\n"
+"\n"
+" * 如果含义为一个文件，使用 \"./%s\"，或者\n"
+" * 如果含义为一个范围，使用 --format-patch 选项。\n"
+
+#: git-send-email.perl:610
+#, perl-format
+msgid "Failed to opendir %s: %s"
+msgstr "无法打开目录 %s: %s"
+
+#: git-send-email.perl:634
+#, perl-format
+msgid ""
+"fatal: %s: %s\n"
+"warning: no patches were sent\n"
+msgstr ""
+"严重：%s：%s\n"
+"警告：补丁未能发送\n"
+
+#: git-send-email.perl:645
+msgid ""
+"\n"
+"No patch files specified!\n"
+"\n"
+msgstr ""
+"\n"
+"未指定补丁文件！\n"
+"\n"
+
+#: git-send-email.perl:658
+#, perl-format
+msgid "No subject line in %s?"
+msgstr "在 %s 中没有标题行？"
+
+#: git-send-email.perl:668
+#, perl-format
+msgid "Failed to open for writing %s: %s"
+msgstr "无法写入 %s: %s"
+
+#: git-send-email.perl:678
+msgid ""
+"Lines beginning in \"GIT:\" will be removed.\n"
+"Consider including an overall diffstat or table of contents\n"
+"for the patch you are writing.\n"
+"\n"
+"Clear the body content if you don't wish to send a summary.\n"
+msgstr ""
+"以 \"GIT:\" 开头的行将被删除。\n"
+"考虑包含一个整体的 diffstat 或者您正在写的补丁的目录。\n"
+"\n"
+"如果您不想发送摘要，清除内容。\n"
+
+#: git-send-email.perl:701
+#, perl-format
+msgid "Failed to open %s.final: %s"
+msgstr "无法打开 %s.final: %s"
+
+#: git-send-email.perl:704
+#, perl-format
+msgid "Failed to open %s: %s"
+msgstr "无法打开 %s: %s"
+
+#: git-send-email.perl:739
+msgid "To/Cc/Bcc fields are not interpreted yet, they have been ignored\n"
+msgstr "To/Cc/Bcc 字段不解析，它们被忽略\n"
+
+#: git-send-email.perl:748
+msgid "Summary email is empty, skipping it\n"
+msgstr "摘要邮件为空，跳过\n"
+
+#. TRANSLATORS: please keep [y/N] as is.
+#: git-send-email.perl:780
+#, perl-format
+msgid "Are you sure you want to use <%s> [y/N]? "
+msgstr "您确认要使用 <%s> [y/N]？"
+
+#: git-send-email.perl:809
+msgid ""
+"The following files are 8bit, but do not declare a Content-Transfer-"
+"Encoding.\n"
+msgstr "如下文件含 8bit 内容，但没有声明一个 Content-Transfer-Encoding。\n"
+
+#: git-send-email.perl:814
+msgid "Which 8bit encoding should I declare [UTF-8]? "
+msgstr "要声明 8bit 为什么样的编码格式 [UTF-8]？"
+
+#: git-send-email.perl:822
+#, perl-format
+msgid ""
+"Refusing to send because the patch\n"
+"\t%s\n"
+"has the template subject '*** SUBJECT HERE ***'. Pass --force if you really "
+"want to send.\n"
+msgstr ""
+"拒绝发送，因为补丁\n"
+"\t%s\n"
+"包含模版标题 '*** SUBJECT HERE ***'。如果确实想要发送，使用参数 --force。\n"
+
+#: git-send-email.perl:841
+msgid "To whom should the emails be sent (if anyone)?"
+msgstr "邮件将要发送给谁？"
+
+#: git-send-email.perl:859
+#, perl-format
+msgid "fatal: alias '%s' expands to itself\n"
+msgstr "严重：别名 '%s' 扩展为它自己\n"
+
+#: git-send-email.perl:871
+msgid "Message-ID to be used as In-Reply-To for the first email (if any)? "
+msgstr "Message-ID 被用作第一封邮件的 In-Reply-To ？"
+
+#: git-send-email.perl:921 git-send-email.perl:929
+#, perl-format
+msgid "error: unable to extract a valid address from: %s\n"
+msgstr "错误：不能从 %s 中提取一个有效的邮件地址\n"
+
+#. TRANSLATORS: Make sure to include [q] [d] [e] in your
+#. translation. The program will only accept English input
+#. at this point.
+#: git-send-email.perl:933
+msgid "What to do with this address? ([q]uit|[d]rop|[e]dit): "
+msgstr "如何处理这个地址？([q]uit|[d]rop|[e]dit)："
+
+#: git-send-email.perl:1234
+#, perl-format
+msgid "CA path \"%s\" does not exist"
+msgstr "CA 路径 \"%s\" 不存在"
+
+#: git-send-email.perl:1309
+msgid ""
+" The Cc list above has been expanded by additional\n"
+" addresses found in the patch commit message. By default\n"
+" send-email prompts before sending whenever this occurs.\n"
+" This behavior is controlled by the sendemail.confirm\n"
+" configuration setting.\n"
+"\n"
+" For additional information, run 'git send-email --help'.\n"
+" To retain the current behavior, but squelch this message,\n"
+" run 'git config --global sendemail.confirm auto'.\n"
+"\n"
+msgstr ""
+" 以上的抄送列表（Cc）已经用补丁提交信息中发现的地址进行\n"
+" 了扩展。缺省 send-email 会给出提示。这个行为可以通过\n"
+" sendemail.confirm 配置设置。\n"
+"\n"
+" 更多信息，执行 'git send-email --help'。\n"
+" 要保持当前行为，但不显示此信息，运行 'git config --global\n"
+" sendemail.confirm auto'。\n"
+"\n"
+
+#. TRANSLATORS: Make sure to include [y] [n] [q] [a] in your
+#. translation. The program will only accept English input
+#. at this point.
+#: git-send-email.perl:1324
+msgid "Send this email? ([y]es|[n]o|[q]uit|[a]ll): "
+msgstr "发送邮件？([y]es|[n]o|[q]uit|[a]ll)："
+
+#: git-send-email.perl:1327
+msgid "Send this email reply required"
+msgstr "发送要求的邮件回复"
+
+#: git-send-email.perl:1353
+msgid "The required SMTP server is not properly defined."
+msgstr "要求的 SMTP 服务器未被正确定义。"
+
+#: git-send-email.perl:1397
+#, perl-format
+msgid "Server does not support STARTTLS! %s"
+msgstr "服务器不支持 STARTTLS！%s"
+
+#: git-send-email.perl:1403
+msgid "Unable to initialize SMTP properly. Check config and use --smtp-debug."
+msgstr "无法正确地初始化 SMTP。检查配置并使用 --smtp-debug。"
+
+#: git-send-email.perl:1421
+#, perl-format
+msgid "Failed to send %s\n"
+msgstr "无法发送 %s\n"
+
+#: git-send-email.perl:1424
+#, perl-format
+msgid "Dry-Sent %s\n"
+msgstr "演习发送 %s\n"
+
+#: git-send-email.perl:1424
+#, perl-format
+msgid "Sent %s\n"
+msgstr "正发送 %s\n"
+
+#: git-send-email.perl:1426
+msgid "Dry-OK. Log says:\n"
+msgstr "演习成功。日志说：\n"
+
+#: git-send-email.perl:1426
+msgid "OK. Log says:\n"
+msgstr "OK。日志说：\n"
+
+#: git-send-email.perl:1438
+msgid "Result: "
+msgstr "结果："
+
+#: git-send-email.perl:1441
+msgid "Result: OK\n"
+msgstr "结果：OK\n"
+
+#: git-send-email.perl:1454
+#, perl-format
+msgid "can't open file %s"
+msgstr "无法打开文件 %s"
+
+#: git-send-email.perl:1501 git-send-email.perl:1521
+#, perl-format
+msgid "(mbox) Adding cc: %s from line '%s'\n"
+msgstr "(mbox) 添加 cc：%s 自行 '%s'\n"
+
+#: git-send-email.perl:1507
+#, perl-format
+msgid "(mbox) Adding to: %s from line '%s'\n"
+msgstr "(mbox) 添加 to：%s 自行 '%s'\n"
+
+#: git-send-email.perl:1555
+#, perl-format
+msgid "(non-mbox) Adding cc: %s from line '%s'\n"
+msgstr "(non-mbox) 添加 cc：%s 自行 '%s'\n"
+
+#: git-send-email.perl:1578
+#, perl-format
+msgid "(body) Adding cc: %s from line '%s'\n"
+msgstr "(body) 添加 cc: %s 自行 '%s'\n"
+
+#: git-send-email.perl:1676
+#, perl-format
+msgid "(%s) Could not execute '%s'"
+msgstr "(%s) 不能执行 '%s'"
+
+#: git-send-email.perl:1683
+#, perl-format
+msgid "(%s) Adding %s: %s from: '%s'\n"
+msgstr "(%s) 添加 %s: %s 自：'%s'\n"
+
+#: git-send-email.perl:1687
+#, perl-format
+msgid "(%s) failed to close pipe to '%s'"
+msgstr "(%s) 无法关闭管道至 '%s'"
+
+#: git-send-email.perl:1714
+msgid "cannot send message as 7bit"
+msgstr "不能以 7bit 形式发送信息"
+
+#: git-send-email.perl:1722
+msgid "invalid transfer encoding"
+msgstr "无效的传送编码"
+
+#: git-send-email.perl:1741 git-send-email.perl:1792 git-send-email.perl:1802
+#, perl-format
+msgid "unable to open %s: %s\n"
+msgstr "不能打开 %s：%s\n"
+
+#: git-send-email.perl:1744
+#, perl-format
+msgid "%s: patch contains a line longer than 998 characters"
+msgstr "%s：补丁包含一个超过 998 字符的行"
+
+#: git-send-email.perl:1760
+#, perl-format
+msgid "Skipping %s with backup suffix '%s'.\n"
+msgstr "略过 %s 含备份后缀 '%s'。\n"
+
+#. TRANSLATORS: please keep "[y|N]" as is.
+#: git-send-email.perl:1764
+#, perl-format
+msgid "Do you really want to send %s? [y|N]: "
+msgstr "您真的要发送 %s？[y|N]："
+
+#~ msgid "tag: tagging "
+#~ msgstr "tag: tagging "
+
+#~ msgid "object of unknown type"
+#~ msgstr "未知类型的对象"
+
+#~ msgid "commit object"
+#~ msgstr "提交对象"
+
+#~ msgid "tree object"
+#~ msgstr "树对象"
+
+#~ msgid "blob object"
+#~ msgstr "数据对象"
+
+#~ msgid "other tag object"
+#~ msgstr "其它标签对象"
+
+#~ msgid ""
+#~ "There is nothing to exclude from by :(exclude) patterns.\n"
+#~ "Perhaps you forgot to add either ':/' or '.' ?"
+#~ msgstr ""
+#~ "没有为 :(exclude) 模式提供要忽略的内容。也许您忘记了\n"
+#~ "添加 ':/' 或 '.' ？"
+
+#~ msgid "unrecognized format: %%(%s)"
+#~ msgstr "未能识别的格式：%%(%s)"
+
+#~ msgid ":strip= requires a positive integer argument"
+#~ msgstr ":strip= 需要一个正整型参数"
+
+#~ msgid "ref '%s' does not have %ld components to :strip"
+#~ msgstr "引用 '%s' 未提供用于 :strip 的 %ld 个组件"
+
+#~ msgid "unknown %.*s format %s"
+#~ msgstr "未知的 %.*s 格式 %s"
+
+#~ msgid "[%s: gone]"
+#~ msgstr "[%s: 丢失]"
+
+#~ msgid "[%s]"
+#~ msgstr "[%s]"
+
+#~ msgid "[%s: behind %d]"
+#~ msgstr "[%s：落后 %d]"
+
+#~ msgid "[%s: ahead %d]"
+#~ msgstr "[%s：领先 %d]"
+
+#~ msgid "[%s: ahead %d, behind %d]"
+#~ msgstr "[%s：领先 %d，落后 %d]"
+
+#~ msgid " **** invalid ref ****"
+#~ msgstr " **** 无效引用 ****"
+
+#~ msgid "insanely long object directory %.*s"
+#~ msgstr "不正常的长对象目录 %.*s"
+
+#~ msgid "git merge [<options>] <msg> HEAD <commit>"
+#~ msgstr "git merge [<选项>] <说明> HEAD <提交>"
+
+#~ msgid "'%s' is not a commit"
+#~ msgstr "'%s' 不是一个提交"
+
+#~ msgid "cannot open file '%s'"
+#~ msgstr "无法打开文件 '%s'"
+
+#~ msgid "could not close file %s"
+#~ msgstr "无法关闭文件 %s"
+
+#~ msgid "tag name too long: %.*s..."
+#~ msgstr "标签名称太长：%.*s..."
+
+#~ msgid "tag header too big."
+#~ msgstr "标签头信息太大。"
+
+#~ msgid ""
+#~ "If the patch applies cleanly, the edited hunk will immediately be\n"
+#~ "marked for discarding"
+#~ msgstr "如果补丁能干净地应用，编辑块将立即标记为丢弃"
+
+#~ msgid "Use an experimental blank-line-based heuristic to improve diffs"
+#~ msgstr "使用一个试验性的基于空行的启发式算法改进差异显示"
+
+#~ msgid "Clever... amending the last one with dirty index."
+#~ msgstr "聪明... 用脏索引修补最后一个提交。"
+
+#~ msgid ""
+#~ "the following submodule (or one of its nested submodules)\n"
+#~ "uses a .git directory:"
+#~ msgid_plural ""
+#~ "the following submodules (or one of their nested submodules)\n"
+#~ "use a .git directory:"
+#~ msgstr[0] "以下子模组（或一个其嵌套子模组）使用了一个 .git 目录："
+#~ msgstr[1] "以下子模组（或一个其嵌套子模组）使用了一个 .git 目录："
+
+#~ msgid ""
+#~ "\n"
+#~ "(use 'rm -rf' if you really want to remove it including all of its "
+#~ "history)"
+#~ msgstr ""
+#~ "\n"
+#~ "（使用 'rm -rf' 命令如果您真的想删除它及其全部历史）"
+
#~ msgid "Could not write to %s"
#~ msgstr "不能写入 %s"