------------------
The git configuration file contains a number of variables that affect
-the git command's behavior. They can be used by both the git plumbing
+the git command's behavior. `.git/config` file for each repository
+is used to store the information for that repository, and
+`$HOME/.gitconfig` is used to store per user information to give
+fallback values for `.git/config` file.
+
+They can be used by both the git plumbing
and the porcelains. The variables are divided into sections, where
in the fully qualified variable name the variable itself is the last
dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive and only alphanumeric
characters are allowed. Some variables may appear multiple times.
+Syntax
+~~~~~~
+
The syntax is fairly flexible and permissive; whitespaces are mostly
-ignored. The '#' and ';' characters begin comments to the end of line,
-blank lines are ignored, lines containing strings enclosed in square
-brackets start sections and all the other lines are recognized
-as setting variables, in the form 'name = value'. If there is no equal
-sign on the line, the entire line is taken as 'name' and the variable
-is recognized as boolean "true". String values may be entirely or partially
-enclosed in double quotes; some variables may require special value format.
+ignored. The '#' and ';' characters begin comments to the end of line,
+blank lines are ignored.
+
+The file consists of sections and variables. A section begins with
+the name of the section in square brackets and continues until the next
+section begins. Section names are not case sensitive. Only alphanumeric
+characters, '`-`' and '`.`' are allowed in section names. Each variable
+must belong to some section, which means that there must be section
+header before first setting of a variable.
+
+Sections can be further divided into subsections. To begin a subsection
+put its name in double quotes, separated by space from the section name,
+in the section header, like in example below:
+
+--------
+ [section "subsection"]
+
+--------
+
+Subsection names can contain any characters except newline (doublequote
+'`"`' and backslash have to be escaped as '`\"`' and '`\\`',
+respectively) and are case sensitive. Section header cannot span multiple
+lines. Variables may belong directly to a section or to a given subsection.
+You can have `[section]` if you have `[section "subsection"]`, but you
+don't need to.
+
+There is also (case insensitive) alternative `[section.subsection]` syntax.
+In this syntax subsection names follow the same restrictions as for section
+name.
+
+All the other lines are recognized as setting variables, in the form
+'name = value'. If there is no equal sign on the line, the entire line
+is taken as 'name' and the variable is recognized as boolean "true".
+The variable names are case-insensitive and only alphanumeric
+characters and '`-`' are allowed. There can be more than one value
+for a given variable; we say then that variable is multivalued.
+
+Leading and trailing whitespace in a variable value is discarded.
+Internal whitespace within a variable value is retained verbatim.
+
+The values following the equals sign in variable assign are all either
+a string, an integer, or a boolean. Boolean values may be given as yes/no,
+0/1 or true/false. Case is not significant in boolean values, when
+converting value to the canonical form using '--bool' type specifier;
+`git-config` will ensure that the output is "true" or "false".
+
+String values may be entirely or partially enclosed in double quotes.
+You need to enclose variable value in double quotes if you want to
+preserve leading or trailing whitespace, or if variable value contains
+beginning of comment characters (if it contains '#' or ';').
+Double quote '`"`' and backslash '`\`' characters in variable value must
+be escaped: use '`\"`' for '`"`' and '`\\`' for '`\`'.
+
+The following escape sequences (beside '`\"`' and '`\\`') are recognized:
+'`\n`' for newline character (NL), '`\t`' for horizontal tabulation (HT, TAB)
+and '`\b`' for backspace (BS). No other char escape sequence, nor octal
+char sequences are valid.
+
+Variable value ending in a '`\`' is continued on the next line in the
+customary UNIX fashion.
+
+Some variables may require special value format.
Example
~~~~~~~
remote = origin
merge = refs/heads/devel
+ # Proxy settings
+ [core]
+ gitProxy="ssh" for "ssh://kernel.org/"
+ gitProxy=default-proxy ; for the rest
Variables
~~~~~~~~~
group-writable). When 'all' (or 'world' or 'everybody'), the
repository will be readable by all users, additionally to being
group-shareable. When 'umask' (or 'false'), git will use permissions
- reported by umask(2). See gitlink:git-init-db[1]. False by default.
+ reported by umask(2). See gitlink:git-init[1]. False by default.
core.warnAmbiguousRefs::
If true, git will warn you if the ref name you passed it is ambiguous
database directly (where the "http://" and "rsync://" protocols
count as direct access).
+core.packedGitWindowSize::
+ Number of bytes of a pack file to map into memory in a
+ single mapping operation. Larger window sizes may allow
+ your system to process a smaller number of large pack files
+ more quickly. Smaller window sizes will negatively affect
+ performance due to increased calls to the operating system's
+ memory manager, but may improve performance when accessing
+ a large number of large pack files.
++
+Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
+MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
+be reasonable for all users/operating systems. You probably do
+not need to adjust this value.
++
+Common unit suffixes of 'k', 'm', or 'g' are supported.
+
+core.packedGitLimit::
+ Maximum number of bytes to map simultaneously into memory
+ from pack files. If Git needs to access more than this many
+ bytes at once to complete an operation it will unmap existing
+ regions to reclaim virtual address space within the process.
++
+Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
+This should be reasonable for all users/operating systems, except on
+the largest projects. You probably do not need to adjust this value.
++
+Common unit suffixes of 'k', 'm', or 'g' are supported.
+
alias.*::
Command aliases for the gitlink:git[1] command wrapper - e.g.
after defining "alias.last = cat-file commit HEAD", the invocation
spaces, the usual shell quoting and escaping is supported.
quote pair and a backslash can be used to quote them.
+ If the alias expansion is prefixed with an exclamation point,
+ it will be treated as a shell command. For example, defining
+ "alias.new = !gitk --all --not ORIG_HEAD", the invocation
+ "git new" is equivalent to running the shell command
+ "gitk --all --not ORIG_HEAD".
+
apply.whitespace::
Tells `git-apply` how to handle whitespaces, in the same way
as the '--whitespace' option. See gitlink:git-apply[1].
this option, `git pull` defaults to merge the first refspec fetched.
Specify multiple values to get an octopus merge.
+color.branch::
+ A boolean to enable/disable color in the output of
+ gitlink:git-branch[1]. May be set to `true` (or `always`),
+ `false` (or `never`) or `auto`, in which case colors are used
+ only when the output is to a terminal. Defaults to false.
+
+color.branch.<slot>::
+ Use customized color for branch coloration. `<slot>` is one of
+ `current` (the current branch), `local` (a local branch),
+ `remote` (a tracking branch in refs/remotes/), `plain` (other
+ refs).
++
+The value for these configuration variables is a list of colors (at most
+two) and attributes (at most one), separated by spaces. The colors
+accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`,
+`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
+`blink` and `reverse`. The first color given is the foreground; the
+second is the background. The position of the attribute, if any,
+doesn't matter.
+
color.diff::
When true (or `always`), always use colors in patch.
When false (or `never`), never. When set to `auto`, use
colors only when the output is to the terminal.
color.diff.<slot>::
- Use customized color for diff colorization. `<slot>`
- specifies which part of the patch to use the specified
- color, and is one of `plain` (context text), `meta`
- (metainformation), `frag` (hunk header), `old` (removed
- lines), or `new` (added lines). The value for these
- configuration variables can be one of: `normal`, `bold`,
- `dim`, `ul`, `blink`, `reverse`, `reset`, `black`,
- `red`, `green`, `yellow`, `blue`, `magenta`, `cyan`, or
- `white`.
+ Use customized color for diff colorization. `<slot>` specifies
+ which part of the patch to use the specified color, and is one
+ of `plain` (context text), `meta` (metainformation), `frag`
+ (hunk header), `old` (removed lines), `new` (added lines),
+ `commit` (commit headers), or `whitespace` (highlighting dubious
+ whitespace). The values of these variables may be specified as
+ in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
or `untracked` (files which are not tracked by git). The values of
- these variables may be specified as in color.diff.<slot>.
+ these variables may be specified as in color.branch.<slot>.
diff.renameLimit::
The number of files to consider when performing the copy/rename
will enable basic rename detection. If set to "copies" or
"copy", it will detect copies, as well.
+fetch.unpackLimit::
+ If the number of objects fetched over the git native
+ transfer is below this
+ limit, then the objects will be unpacked into loose object
+ files. However if the number of received objects equals or
+ exceeds this limit then the received pack will be stored as
+ a pack, after adding any missing delta bases. Storing the
+ pack from a push can make the push operation complete faster,
+ especially on slow filesystems.
+
format.headers::
Additional email headers to include in a patch to be submitted
by mail. See gitlink:git-format-patch[1].
+gc.packrefs::
+ `git gc` does not run `git pack-refs` in a bare repository by
+ default so that older dumb-transport clients can still fetch
+ from the repository. Setting this to `true` lets `git
+ gc` to run `git pack-refs`. Setting this to `false` tells
+ `git gc` never to run `git pack-refs`. The default setting is
+ `notbare`. Enable it only when you know you do not have to
+ support such clients. The default setting will change to `true`
+ at some stage, and setting this to `false` will continue to
+ prevent `git pack-refs` from being run from `git gc`.
+
gc.reflogexpire::
`git reflog expire` removes reflog entries older than
this time; defaults to 90 days.
Whether to include summaries of merged commits in newly created
merge commit messages. False by default.
+merge.verbosity::
+ Controls the amount of output shown by the recursive merge
+ strategy. Level 0 outputs nothing except a final error
+ message if conflicts were detected. Level 1 outputs only
+ conflicts, 2 outputs conflicts and file changes. Level 5 and
+ above outputs debugging information. The default is level 2.
+
pack.window::
The size of the window used by gitlink:git-pack-objects[1] when no
window size is given on the command line. Defaults to 10.
The default set of "refspec" for gitlink:git-push[1]. See
gitlink:git-push[1].
+remote.<name>.receivepack::
+ The default program to execute on the remote side when pushing. See
+ option \--exec of gitlink:git-push[1].
+
+remote.<name>.uploadpack::
+ The default program to execute on the remote side when fetching. See
+ option \--exec of gitlink:git-fetch-pack[1].
+
repack.usedeltabaseoffset::
Allow gitlink:git-repack[1] to create packs that uses
delta-base offset. Defaults to false.
Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'
environment variables. See gitlink:git-commit-tree[1].
+user.signingkey::
+ If gitlink:git-tag[1] is not selecting the key you want it to
+ automatically when creating a signed tag, you can override the
+ default selection with this variable. This option is passed
+ unchanged to gpg's --local-user parameter, so you may specify a key
+ using any method that gpg supports.
+
whatchanged.difftree::
The default gitlink:git-diff-tree[1] arguments to be used
for gitlink:git-whatchanged[1].
even if that push is forced. This configuration variable is
set when initializing a shared repository.
+transfer.unpackLimit::
+ When `fetch.unpackLimit` or `receive.unpackLimit` are
+ not set, the value of this variable is used instead.
+
+