git -C src push -u srv master
'
-# Do FULL fetch by disabling filter-spec using --no-filter.
+# Do FULL fetch by disabling inherited filter-spec using --no-filter.
# Verify we have all the new blobs.
test_expect_success 'override inherited filter-spec using --no-filter' '
git -C pc1 fetch --no-filter origin &&
test_line_count = 0 observed
'
+# create new commits in "src" repo to establish a history on file.3.txt
+# and push to "srv.bare".
+test_expect_success 'push new commits to server for file.3.txt' '
+ for x in a b c d e f
+ do
+ echo "Mod file.3.txt $x" >>src/file.3.txt
+ git -C src add file.3.txt
+ git -C src commit -m "mod $x"
+ done &&
+ git -C src push -u srv master
+'
+
+# Do a partial fetch and then try to manually fetch the missing objects.
+# This can be used as the basis of a pre-command hook to bulk fetch objects
+# perhaps combined with a command in dry-run mode.
+test_expect_success 'manual prefetch of missing objects' '
+ git -C pc1 fetch --filter=blob:none origin &&
+ git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \
+ | awk -f print_1.awk \
+ | sed "s/?//" \
+ | sort >observed.oids &&
+ test_line_count = 6 observed.oids &&
+ git -C pc1 fetch-pack --stdin "file://$(pwd)/srv.bare" <observed.oids &&
+ git -C pc1 rev-list master..origin/master --quiet --objects --missing=print \
+ | awk -f print_1.awk \
+ | sed "s/?//" \
+ | sort >observed.oids &&
+ test_line_count = 0 observed.oids
+'
+
+test_expect_success 'partial clone with transfer.fsckobjects=1 uses index-pack --fsck-objects' '
+ git init src &&
+ test_commit -C src x &&
+ test_config -C src uploadpack.allowfilter 1 &&
+ test_config -C src uploadpack.allowanysha1inwant 1 &&
+
+ GIT_TRACE="$(pwd)/trace" git -c transfer.fsckobjects=1 \
+ clone --filter="blob:none" "file://$(pwd)/src" dst &&
+ grep "git index-pack.*--fsck-objects" trace
+'
+
+test_expect_success 'partial clone fetches blobs pointed to by refs even if normally filtered out' '
+ rm -rf src dst &&
+ git init src &&
+ test_commit -C src x &&
+ test_config -C src uploadpack.allowfilter 1 &&
+ test_config -C src uploadpack.allowanysha1inwant 1 &&
+
+ # Create a tag pointing to a blob.
+ BLOB=$(echo blob-contents | git -C src hash-object --stdin -w) &&
+ git -C src tag myblob "$BLOB" &&
+
+ git clone --filter="blob:none" "file://$(pwd)/src" dst 2>err &&
+ ! grep "does not point to a valid object" err &&
+ git -C dst fsck
+'
+
+. "$TEST_DIRECTORY"/lib-httpd.sh
+start_httpd
+
+# Converts bytes into a form suitable for inclusion in a sed command. For
+# example, "printf 'ab\r\n' | hex_unpack" results in '\x61\x62\x0d\x0a'.
+sed_escape () {
+ perl -e '$/ = undef; $input = <>; print unpack("H2" x length($input), $input)' |
+ sed 's/\(..\)/\\x\1/g'
+}
+
+test_expect_success 'upon cloning, check that all refs point to objects' '
+ SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" &&
+ rm -rf "$SERVER" repo &&
+ test_create_repo "$SERVER" &&
+ test_commit -C "$SERVER" foo &&
+ test_config -C "$SERVER" uploadpack.allowfilter 1 &&
+ test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 &&
+
+ # Create a tag pointing to a blob.
+ BLOB=$(echo blob-contents | git -C "$SERVER" hash-object --stdin -w) &&
+ git -C "$SERVER" tag myblob "$BLOB" &&
+
+ # Craft a packfile not including that blob.
+ git -C "$SERVER" rev-parse HEAD |
+ git -C "$SERVER" pack-objects --stdout >incomplete.pack &&
+
+ # Replace the existing packfile with the crafted one. The protocol
+ # requires that the packfile be sent in sideband 1, hence the extra
+ # \x01 byte at the beginning.
+ printf "1,/packfile/!c %04x\\\\x01%s0000" \
+ "$(($(wc -c <incomplete.pack) + 5))" \
+ "$(sed_escape <incomplete.pack)" \
+ >"$HTTPD_ROOT_PATH/one-time-sed" &&
+
+ # Use protocol v2 because the sed command looks for the "packfile"
+ # section header.
+ test_config -C "$SERVER" protocol.version 2 &&
+ test_must_fail git -c protocol.version=2 clone \
+ --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2>err &&
+
+ grep "did not send all necessary objects" err &&
+
+ # Ensure that the one-time-sed script was used.
+ ! test -e "$HTTPD_ROOT_PATH/one-time-sed"
+'
+
+test_expect_success 'when partial cloning, tolerate server not sending target of tag' '
+ SERVER="$HTTPD_DOCUMENT_ROOT_PATH/server" &&
+ rm -rf "$SERVER" repo &&
+ test_create_repo "$SERVER" &&
+ test_commit -C "$SERVER" foo &&
+ test_config -C "$SERVER" uploadpack.allowfilter 1 &&
+ test_config -C "$SERVER" uploadpack.allowanysha1inwant 1 &&
+
+ # Create an annotated tag pointing to a blob.
+ BLOB=$(echo blob-contents | git -C "$SERVER" hash-object --stdin -w) &&
+ git -C "$SERVER" tag -m message -a myblob "$BLOB" &&
+
+ # Craft a packfile including the tag, but not the blob it points to.
+ # Also, omit objects referenced from HEAD in order to force a second
+ # fetch (to fetch missing objects) upon the automatic checkout that
+ # happens after a clone.
+ printf "%s\n%s\n--not\n%s\n%s\n" \
+ $(git -C "$SERVER" rev-parse HEAD) \
+ $(git -C "$SERVER" rev-parse myblob) \
+ $(git -C "$SERVER" rev-parse HEAD^{tree}) \
+ $(git -C "$SERVER" rev-parse myblob^{blob}) |
+ git -C "$SERVER" pack-objects --thin --stdout >incomplete.pack &&
+
+ # Replace the existing packfile with the crafted one. The protocol
+ # requires that the packfile be sent in sideband 1, hence the extra
+ # \x01 byte at the beginning.
+ printf "1,/packfile/!c %04x\\\\x01%s0000" \
+ "$(($(wc -c <incomplete.pack) + 5))" \
+ "$(sed_escape <incomplete.pack)" \
+ >"$HTTPD_ROOT_PATH/one-time-sed" &&
+
+ # Use protocol v2 because the sed command looks for the "packfile"
+ # section header.
+ test_config -C "$SERVER" protocol.version 2 &&
+
+ # Exercise to make sure it works.
+ git -c protocol.version=2 clone \
+ --filter=blob:none $HTTPD_URL/one_time_sed/server repo 2> err &&
+ ! grep "missing object referenced by" err &&
+
+ # Ensure that the one-time-sed script was used.
+ ! test -e "$HTTPD_ROOT_PATH/one-time-sed"
+'
+
+stop_httpd
+
test_done