------------------
The git configuration file contains a number of variables that affect
-the git command's behavior. `.git/config` file for each repository
-is used to store the information for that repository, and
-`$HOME/.gitconfig` is used to store per user information to give
-fallback values for `.git/config` file. The file `/etc/gitconfig`
-can be used to store system-wide defaults.
-
-They can be used by both the git plumbing
-and the porcelains. The variables are divided into sections, where
-in the fully qualified variable name the variable itself is the last
+the git command's behavior. The `.git/config` file in each repository
+is used to store the configuration for that repository, and
+`$HOME/.gitconfig` is used to store a per-user configuration as
+fallback values for the `.git/config` file. The file `/etc/gitconfig`
+can be used to store a system-wide default configuration.
+
+The configuration variables are used by both the git plumbing
+and the porcelains. The variables are divided into sections, wherein
+the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive and only alphanumeric
characters are allowed. Some variables may appear multiple times.
The file consists of sections and variables. A section begins with
the name of the section in square brackets and continues until the next
section begins. Section names are not case sensitive. Only alphanumeric
-characters, '`-`' and '`.`' are allowed in section names. Each variable
-must belong to some section, which means that there must be section
-header before first setting of a variable.
+characters, `-` and `.` are allowed in section names. Each variable
+must belong to some section, which means that there must be a section
+header before the first setting of a variable.
Sections can be further divided into subsections. To begin a subsection
put its name in double quotes, separated by space from the section name,
-in the section header, like in example below:
+in the section header, like in the example below:
--------
[section "subsection"]
--------
-Subsection names can contain any characters except newline (doublequote
-'`"`' and backslash have to be escaped as '`\"`' and '`\\`',
-respectively) and are case sensitive. Section header cannot span multiple
+Subsection names are case sensitive and can contain any characters except
+newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`,
+respectively). Section headers cannot span multiple
lines. Variables may belong directly to a section or to a given subsection.
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
-There is also (case insensitive) alternative `[section.subsection]` syntax.
-In this syntax subsection names follow the same restrictions as for section
-name.
+There is also a case insensitive alternative `[section.subsection]` syntax.
+In this syntax, subsection names follow the same restrictions as for section
+names.
-All the other lines are recognized as setting variables, in the form
+All the other lines (and the remainder of the line after the section
+header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
The variable names are case-insensitive and only alphanumeric
-characters and '`-`' are allowed. There can be more than one value
+characters and `-` are allowed. There can be more than one value
for a given variable; we say then that variable is multivalued.
Leading and trailing whitespace in a variable value is discarded.
The values following the equals sign in variable assign are all either
a string, an integer, or a boolean. Boolean values may be given as yes/no,
-0/1 or true/false. Case is not significant in boolean values, when
+0/1, true/false or on/off. Case is not significant in boolean values, when
converting value to the canonical form using '--bool' type specifier;
'git-config' will ensure that the output is "true" or "false".
String values may be entirely or partially enclosed in double quotes.
-You need to enclose variable value in double quotes if you want to
-preserve leading or trailing whitespace, or if variable value contains
-beginning of comment characters (if it contains '#' or ';').
-Double quote '`"`' and backslash '`\`' characters in variable value must
-be escaped: use '`\"`' for '`"`' and '`\\`' for '`\`'.
-
-The following escape sequences (beside '`\"`' and '`\\`') are recognized:
-'`\n`' for newline character (NL), '`\t`' for horizontal tabulation (HT, TAB)
-and '`\b`' for backspace (BS). No other char escape sequence, nor octal
+You need to enclose variable values in double quotes if you want to
+preserve leading or trailing whitespace, or if the variable value contains
+comment characters (i.e. it contains '#' or ';').
+Double quote `"` and backslash `\` characters in variable values must
+be escaped: use `\"` for `"` and `\\` for `\`.
+
+The following escape sequences (beside `\"` and `\\`) are recognized:
+`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
+and `\b` for backspace (BS). No other char escape sequence, nor octal
char sequences are valid.
-Variable value ending in a '`\`' is continued on the next line in the
+Variable values ending in a `\` are continued on the next line in the
customary UNIX fashion.
-Some variables may require special value format.
+Some variables may require a special value format.
Example
~~~~~~~
in the appropriate manual page. You will find a description of non-core
porcelain configuration variables in the respective porcelain documentation.
+advice.*::
+ When set to 'true', display the given optional help message.
+ When set to 'false', do not display. The configuration variables
+ are:
++
+--
+ pushNonFastForward::
+ Advice shown when linkgit:git-push[1] refuses
+ non-fast-forward refs. Default: true.
+ statusHints::
+ Directions on how to stage/unstage/add shown in the
+ output of linkgit:git-status[1] and the template shown
+ when writing commit messages. Default: true.
+--
+
core.fileMode::
If false, the executable bit differences between the index and
the working copy are ignored; useful on broken filesystems like FAT.
See linkgit:git-update-index[1]. True by default.
+core.ignoreCygwinFSTricks::
+ This option is only used by Cygwin implementation of Git. If false,
+ the Cygwin stat() and lstat() functions are used. This may be useful
+ if your repository consists of a few separate directories joined in
+ one hierarchy using Cygwin mount. If true, Git uses native Win32 API
+ whenever it is possible and falls back to Cygwin functions only to
+ handle symbol links. The native mode is more than twice faster than
+ normal Cygwin l/stat() functions. True by default, unless core.filemode
+ is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's
+ POSIX emulation is required to support core.filemode.
+
core.trustctime::
If false, the ctime differences between the index and the
working copy are ignored; useful when the inode change time
Can be overridden by the 'GIT_PROXY_COMMAND' environment variable
(which always applies universally, without the special "for"
handling).
++
+The special string `none` can be used as the proxy command to
+specify that no proxy be used for a given domain pattern.
+This is useful for excluding servers inside a firewall from
+proxy use, while defaulting to a common proxy for external domains.
core.ignoreStat::
If true, commands which modify both the working tree and the index
group-shareable. When 'umask' (or 'false'), git will use permissions
reported by umask(2). When '0xxx', where '0xxx' is an octal number,
files in the repository will have this mode value. '0xxx' will override
- user's umask value, and thus, users with a safe umask (0077) can use
- this option. Examples: '0660' is equivalent to 'group'. '0640' is a
+ user's umask value (whereas the other options will only override
+ requested parts of the user's umask value). Examples: '0660' will make
+ the repo read/write-able for the owner and group, but inaccessible to
+ others (equivalent to 'group' unless umask is e.g. '0022'). '0640' is a
repository that is group-readable but not group-writable.
See linkgit:git-init[1]. False by default.
Commands such as `commit` and `tag` that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
- `GIT_EDITOR` is not set. The order of preference is
- `GIT_EDITOR` environment, `core.editor`, `VISUAL` and
- `EDITOR` environment variables and then finally `vi`.
+ `GIT_EDITOR` is not set. See linkgit:git-var[1].
core.pager::
The command that git will use to paginate output. Can
to override git's default settings this way, you need
to be explicit. For example, to disable the S option
in a backward compatible manner, set `core.pager`
- to "`less -+$LESS -FRX`". This will be passed to the
+ to `less -+$LESS -FRX`. This will be passed to the
shell by git, which will translate the final command to
- "`LESS=FRSX less -+FRSX -FRX`".
+ `LESS=FRSX less -+FRSX -FRX`.
core.whitespace::
A comma separated list of common whitespace problems to
journalling (traditional UNIX filesystems) or that only journal metadata
and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
+core.preloadindex::
+ Enable parallel index preload for operations like 'git diff'
++
+This can speed up operations like 'git diff' and 'git status' especially
+on filesystems like NFS that have weak caching semantics and thus
+relatively high IO latencies. With this set to 'true', git will do the
+index comparison to the filesystem data in parallel, allowing
+overlapping IO's.
+
+core.createObject::
+ You can set this to 'link', in which case a hardlink followed by
+ a delete of the source are used to make sure that object creation
+ will not overwrite existing objects.
++
+On some file system/operating system combinations, this is unreliable.
+Set this config setting to 'rename' there; However, This will remove the
+check that makes sure that existing object files will not get overwritten.
+
+add.ignore-errors::
+ Tells 'git-add' to continue adding files when some files cannot be
+ added due to indexing errors. Equivalent to the '--ignore-errors'
+ option of linkgit:git-add[1].
+
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
after defining "alias.last = cat-file commit HEAD", the invocation
it will be treated as a shell command. For example, defining
"alias.new = !gitk --all --not ORIG_HEAD", the invocation
"git new" is equivalent to running the shell command
-"gitk --all --not ORIG_HEAD".
+"gitk --all --not ORIG_HEAD". Note that shell commands will be
+executed from the top-level directory of a repository, which may
+not necessarily be the current directory.
+
+apply.ignorewhitespace::
+ When set to 'change', tells 'git-apply' to ignore changes in
+ whitespace, in the same way as the '--ignore-space-change'
+ option.
+ When set to one of: no, none, never, false tells 'git-apply' to
+ respect all whitespace differences.
+ See linkgit:git-apply[1].
apply.whitespace::
Tells 'git-apply' how to handle whitespaces, in the same way
This option defaults to never.
branch.<name>.remote::
- When in branch <name>, it tells 'git-fetch' which remote to fetch.
- If this option is not given, 'git-fetch' defaults to remote "origin".
+ When in branch <name>, it tells 'git-fetch' and 'git-push' which
+ remote to fetch from/push to. It defaults to `origin` if no remote is
+ configured. `origin` is also used if you are not on any branch.
branch.<name>.merge::
+ Defines, together with branch.<name>.remote, the upstream branch
+ for the given branch. It tells 'git-fetch'/'git-pull' which
+ branch to merge and can also affect 'git-push' (see push.default).
When in branch <name>, it tells 'git-fetch' the default
refspec to be marked for merging in FETCH_HEAD. The value is
handled like the remote part of a refspec, and must match a
branch.<name>.mergeoptions::
Sets default options for merging into branch <name>. The syntax and
- supported options are equal to that of linkgit:git-merge[1], but
+ supported options are the same as those of linkgit:git-merge[1], but
option values containing whitespace characters are currently not
supported.
whitespace errors). The values of these variables may be specified as
in color.branch.<slot>.
+color.grep::
+ When set to `always`, always highlight matches. When `false` (or
+ `never`), never. When set to `true` or `auto`, use color only
+ when the output is written to the terminal. Defaults to `false`.
+
+color.grep.external::
+ The string value of this variable is passed to an external 'grep'
+ command as a command line option if match highlighting is turned
+ on. If set to an empty string, no option is passed at all,
+ turning off coloring for external 'grep' calls; this is the default.
+ For GNU grep, set it to `--color=always` to highlight matches even
+ when a pager is used.
+
+color.grep.match::
+ Use customized color for matches. The value of this variable
+ may be specified as in color.branch.<slot>. It is passed using
+ the environment variables 'GREP_COLOR' and 'GREP_COLORS' when
+ calling an external 'grep'.
+
color.interactive::
When set to `always`, always use colors for interactive prompts
and displays (such as those used by "git-add --interactive").
color.interactive.<slot>::
Use customized color for 'git-add --interactive'
- output. `<slot>` may be `prompt`, `header`, or `help`, for
- three distinct types of normal output from interactive
- programs. The values of these variables may be specified as
+ output. `<slot>` may be `prompt`, `header`, `help` or `error`, for
+ four distinct types of normal output from interactive
+ commands. The values of these variables may be specified as
in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
use (default is true).
+color.showbranch::
+ A boolean to enable/disable color in the output of
+ linkgit:git-show-branch[1]. May be set to `always`,
+ `false` (or `never`) or `auto` (or `true`), in which case colors are used
+ only when the output is to a terminal. Defaults to false.
+
color.status::
A boolean to enable/disable color in the output of
linkgit:git-status[1]. May be set to `always`,
you want to use an external diff program only on a subset of
your files, you might want to use linkgit:gitattributes[5] instead.
+diff.mnemonicprefix::
+ If set, 'git-diff' uses a prefix pair that is different from the
+ standard "a/" and "b/" depending on what is being compared. When
+ this configuration is in effect, reverse diff output also swaps
+ the order of the prefixes:
+'git-diff';;
+ compares the (i)ndex and the (w)ork tree;
+'git-diff HEAD';;
+ compares a (c)ommit and the (w)ork tree;
+'git diff --cached';;
+ compares a (c)ommit and the (i)ndex;
+'git-diff HEAD:file1 file2';;
+ compares an (o)bject and a (w)ork tree entity;
+'git diff --no-index a b';;
+ compares two non-git things (1) and (2).
+
diff.renameLimit::
The number of files to consider when performing the copy/rename
detection; equivalent to the 'git-diff' option '-l'.
will enable basic rename detection. If set to "copies" or
"copy", it will detect copies, as well.
+diff.suppressBlankEmpty::
+ A boolean to inhibit the standard behavior of printing a space
+ before each empty output line. Defaults to false.
+
+diff.tool::
+ Controls which diff tool is used. `diff.tool` overrides
+ `merge.tool` when used by linkgit:git-difftool[1] and has
+ the same valid values as `merge.tool` minus "tortoisemerge"
+ and plus "kompare".
+
+difftool.<tool>.path::
+ Override the path for the given tool. This is useful in case
+ your tool is not in the PATH.
+
+difftool.<tool>.cmd::
+ Specify the command to invoke the specified diff tool.
+ The specified command is evaluated in shell with the following
+ variables available: 'LOCAL' is set to the name of the temporary
+ file containing the contents of the diff pre-image and 'REMOTE'
+ is set to the name of the temporary file containing the contents
+ of the diff post-image.
+
+difftool.prompt::
+ Prompt before each invocation of the diff tool.
+
+diff.wordRegex::
+ A POSIX Extended Regular Expression used to determine what is a "word"
+ when performing word-by-word difference calculations. Character
+ sequences that match the regular expression are "words", all other
+ characters are *ignorable* whitespace.
+
fetch.unpackLimit::
If the number of objects fetched over the git native
transfer is below this
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
-format.numbered::
- A boolean which can enable sequence numbers in patch subjects.
- Setting this option to "auto" will enable it only if there is
- more than one patch. See --numbered option in
+format.attach::
+ Enable multipart/mixed attachments as the default for
+ 'format-patch'. The value can also be a double quoted string
+ which will enable attachments as the default and set the
+ value as the boundary. See the --attach option in
linkgit:git-format-patch[1].
+format.numbered::
+ A boolean which can enable or disable sequence numbers in patch
+ subjects. It defaults to "auto" which enables it only if there
+ is more than one patch. It can be enabled or disabled for all
+ messages by setting it to "true" or "false". See --numbered
+ option in linkgit:git-format-patch[1].
+
format.headers::
Additional email headers to include in a patch to be submitted
by mail. See linkgit:git-format-patch[1].
+format.cc::
+ Additional "Cc:" headers to include in a patch to be submitted
+ by mail. See the --cc option in linkgit:git-format-patch[1].
+
+format.subjectprefix::
+ The default for format-patch is to output files with the '[PATCH]'
+ subject prefix. Use this variable to change that prefix.
+
format.suffix::
The default for format-patch is to output files with the suffix
`.patch`. Use this variable to change that suffix (make sure to
See linkgit:git-log[1], linkgit:git-show[1],
linkgit:git-whatchanged[1].
+format.thread::
+ The default threading style for 'git-format-patch'. Can be
+ either a boolean value, `shallow` or `deep`. `shallow`
+ threading makes every mail a reply to the head of the series,
+ where the head is chosen from the cover letter, the
+ `\--in-reply-to`, and the first patch mail, in this order.
+ `deep` threading makes every mail a reply to the previous one.
+ A true boolean value is the same as `shallow`, and a false
+ value disables threading.
+
+format.signoff::
+ A boolean value which lets you enable the `-s/--signoff` option of
+ format-patch by default. *Note:* Adding the Signed-off-by: line to a
+ patch should be a conscious act and means that you certify you have
+ the rights to submit this work under the same open source license.
+ Please see the 'SubmittingPatches' document for further discussion.
+
gc.aggressiveWindow::
The window size parameter used in the delta compression
algorithm used by 'git-gc --aggressive'. This defaults
gc.pruneexpire::
When 'git-gc' is run, it will call 'prune --expire 2.weeks.ago'.
- Override the grace period with this config variable.
+ Override the grace period with this config variable. The value
+ "now" may be used to disable this grace period and always prune
+ unreachable objects immediately.
gc.reflogexpire::
'git-reflog expire' removes reflog entries older than
kept for this many days when 'git-rerere gc' is run.
The default is 15 days. See linkgit:git-rerere[1].
+gitcvs.commitmsgannotation::
+ Append this string to each commit message. Set to empty string
+ to disable this feature. Defaults to "via git-CVS emulator".
+
gitcvs.enabled::
Whether the CVS server interface is enabled for this repository.
See linkgit:git-cvsserver[1].
Specifies how many context lines should be used in calls to diff
made by the linkgit:git-gui[1]. The default is "5".
+gui.encoding::
+ Specifies the default encoding to use for displaying of
+ file contents in linkgit:git-gui[1] and linkgit:gitk[1].
+ It can be overridden by setting the 'encoding' attribute
+ for relevant files (see linkgit:gitattributes[5]).
+ If this option is not set, the tools default to the
+ locale encoding.
+
gui.matchtrackingbranch::
Determines if new branches created with linkgit:git-gui[1] should
default to tracking remote branches with matching names or
the linkgit:git-gui[1]. When set to "none" spell checking is turned
off.
+gui.fastcopyblame::
+ If true, 'git gui blame' uses '-C' instead of '-C -C' for original
+ location detection. It makes blame significantly faster on huge
+ repositories at the expense of less thorough copy detection.
+
+gui.copyblamethreshold::
+ Specifies the threshold to use in 'git gui blame' original location
+ detection, measured in alphanumeric characters. See the
+ linkgit:git-blame[1] manual for more information on copy detection.
+
+gui.blamehistoryctx::
+ Specifies the radius of history context in days to show in
+ linkgit:gitk[1] for the selected commit, when the `Show History
+ Context` menu item is invoked from 'git gui blame'. If this
+ variable is set to zero, the whole history is shown.
+
+guitool.<name>.cmd::
+ Specifies the shell command line to execute when the corresponding item
+ of the linkgit:git-gui[1] `Tools` menu is invoked. This option is
+ mandatory for every tool. The command is executed from the root of
+ the working directory, and in the environment it receives the name of
+ the tool as 'GIT_GUITOOL', the name of the currently selected file as
+ 'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
+ the head is detached, 'CUR_BRANCH' is empty).
+
+guitool.<name>.needsfile::
+ Run the tool only if a diff is selected in the GUI. It guarantees
+ that 'FILENAME' is not empty.
+
+guitool.<name>.noconsole::
+ Run the command silently, without creating a window to display its
+ output.
+
+guitool.<name>.norescan::
+ Don't rescan the working directory for changes after the tool
+ finishes execution.
+
+guitool.<name>.confirm::
+ Show a confirmation dialog before actually running the tool.
+
+guitool.<name>.argprompt::
+ Request a string argument from the user, and pass it to the tool
+ through the 'ARGS' environment variable. Since requesting an
+ argument implies confirmation, the 'confirm' option has no effect
+ if this is enabled. If the option is set to 'true', 'yes', or '1',
+ the dialog uses a built-in generic prompt; otherwise the exact
+ value of the variable is used.
+
+guitool.<name>.revprompt::
+ Request a single valid revision from the user, and set the
+ 'REVISION' environment variable. In other aspects this option
+ is similar to 'argprompt', and can be used together with it.
+
+guitool.<name>.revunmerged::
+ Show only unmerged branches in the 'revprompt' subdialog.
+ This is useful for tools similar to merge or rebase, but not
+ for things like checkout or reset.
+
+guitool.<name>.title::
+ Specifies the title to use for the prompt dialog. The default
+ is the tool name.
+
+guitool.<name>.prompt::
+ Specifies the general prompt string to display at the top of
+ the dialog, before subsections for 'argprompt' and 'revprompt'.
+ The default value includes the actual command.
+
help.browser::
Specify the browser that will be used to display help in the
'web' format. See linkgit:git-help[1].
Values 'man', 'info', 'web' and 'html' are supported. 'man' is
the default. 'web' and 'html' are the same.
+help.autocorrect::
+ Automatically correct and execute mistyped commands after
+ waiting for the given number of deciseconds (0.1 sec). If more
+ than one command can be deduced from the entered text, nothing
+ will be executed. If the value of this option is negative,
+ the corrected command will be executed immediately. If the
+ value is 0 - the command will be just shown but not executed.
+ This is the default.
+
http.proxy::
Override the HTTP proxy, normally configured using the 'http_proxy'
environment variable (see linkgit:curl[1]). This can be overridden
over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment
variable.
+http.sslCertPasswordProtected::
+ Enable git's password prompt for the SSL certificate. Otherwise
+ OpenSSL will prompt the user, possibly many times, if the
+ certificate or private key is encrypted. Can be overridden by the
+ 'GIT_SSL_CERT_PASSWORD_PROTECTED' environment variable.
+
http.sslCAInfo::
File containing the certificates to verify the peer with when
fetching or pushing over HTTPS. Can be overridden by the
The port number to bind the gitweb httpd to. See
linkgit:git-instaweb[1].
+interactive.singlekey::
+ In interactive commands, allow the user to provide one-letter
+ input with a single key (i.e., without hitting enter).
+ Currently this is used only by the `\--patch` mode of
+ linkgit:git-add[1]. Note that this setting is silently
+ ignored if portable keystroke input is not available.
+
log.date::
Set default date-time mode for the log command. Setting log.date
value is similar to using 'git-log'\'s --date option. The value is one of the
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
normally hide the root commit will now show it. True by default.
+mailmap.file::
+ The location of an augmenting mailmap file. The default
+ mailmap, located in the root of the repository, is loaded
+ first, then the mailmap file pointed to by this variable.
+ The location of the mailmap file may be in a repository
+ subdirectory, or somewhere outside of the repository itself.
+ See linkgit:git-shortlog[1] and linkgit:git-blame[1].
+
man.viewer::
Specify the programs that may be used to display help in the
'man' format. See linkgit:git-help[1].
is set to `false` then this file is not preserved. Defaults to
`true` (i.e. keep the backup files).
+mergetool.keepTemporaries::
+ When invoking a custom merge tool, git uses a set of temporary
+ files to pass to the tool. If the tool returns an error and this
+ variable is set to `true`, then these temporary files will be
+ preserved, otherwise they will be removed after the tool has
+ exited. Defaults to `false`.
+
+mergetool.prompt::
+ Prompt before each invocation of the merge resolution program.
+
pack.window::
The size of the window used by linkgit:git-pack-objects[1] when no
window size is given on the command line. Defaults to 10.
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
- linkgit:git-pack-objects[1].
- A value of 0 means no limit. Defaults to 0.
+ linkgit:git-pack-objects[1] before writing them out to a pack.
+ This cache is used to speed up the writing object phase by not
+ having to recompute the final delta result once the best match
+ for all objects is found. Repacking large repositories on machines
+ which are tight with memory might be badly impacted by this though,
+ especially if this cache pushes the system into swapping.
+ A value of 0 means no limit. The smallest size of 1 byte may be
+ used to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit::
The maximum size of a delta, that is cached in
- linkgit:git-pack-objects[1]. Defaults to 1000.
+ linkgit:git-pack-objects[1]. This cache is used to speed up the
+ writing object phase by not having to recompute the final delta
+ result once the best match for all objects is found. Defaults to 1000.
pack.threads::
Specifies the number of threads to spawn when searching for best
particular git subcommand when writing to a tty. If
`\--paginate` or `\--no-pager` is specified on the command line,
it takes precedence over this option. To disable pagination for
- all commands, set `core.pager` or 'GIT_PAGER' to "`cat`".
+ all commands, set `core.pager` or `GIT_PAGER` to `cat`.
pull.octopus::
The default merge strategy to use when pulling multiple branches
pull.twohead::
The default merge strategy to use when pulling a single branch.
+push.default::
+ Defines the action git push should take if no refspec is given
+ on the command line, no refspec is configured in the remote, and
+ no refspec is implied by any of the options given on the command
+ line. Possible values are:
++
+* `nothing` do not push anything.
+* `matching` push all matching branches.
+ All branches having the same name in both ends are considered to be
+ matching. This is the default.
+* `tracking` push the current branch to its upstream branch.
+* `current` push the current branch to a branch of the same name.
+
+rebase.stat::
+ Whether to show a diffstat of what changed upstream since the last
+ rebase. False by default.
+
+receive.autogc::
+ By default, git-receive-pack will run "git-gc --auto" after
+ receiving data from git-push and updating refs. You can stop
+ it by setting this variable to false.
+
receive.fsckObjects::
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
+receive.denyDeletes::
+ If set to true, git-receive-pack will deny a ref update that deletes
+ the ref. Use this to prevent such a ref deletion via a push.
+
+receive.denyCurrentBranch::
+ If set to true or "refuse", receive-pack will deny a ref update
+ to the currently checked out branch of a non-bare repository.
+ Such a push is potentially dangerous because it brings the HEAD
+ out of sync with the index and working tree. If set to "warn",
+ print a warning of such a push to stderr, but allow the push to
+ proceed. If set to false or "ignore", allow such pushes with no
+ message. Defaults to "warn".
+
receive.denyNonFastForwards::
If set to true, git-receive-pack will deny a ref update which is
- not a fast forward. Use this to prevent such an update via a push,
+ not a fast-forward. Use this to prevent such an update via a push,
even if that push is forced. This configuration variable is
set when initializing a shared repository.
+receive.updateserverinfo::
+ If set to true, git-receive-pack will run git-update-server-info
+ after receiving data from git-push and updating refs.
+
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
linkgit:git-push[1].
+remote.<name>.pushurl::
+ The push URL of a remote repository. See linkgit:git-push[1].
+
remote.<name>.proxy::
For remotes that require curl (http, https and ftp), the URL to
the proxy to use for that remote. Set to the empty string to
default enabled if you create `rr-cache` directory under
`$GIT_DIR`, but can be disabled by setting this option to false.
+sendemail.identity::
+ A configuration identity. When given, causes values in the
+ 'sendemail.<identity>' subsection to take precedence over
+ values in the 'sendemail' section. The default identity is
+ the value of 'sendemail.identity'.
+
+sendemail.smtpencryption::
+ See linkgit:git-send-email[1] for description. Note that this
+ setting is not subject to the 'identity' mechanism.
+
+sendemail.smtpssl::
+ Deprecated alias for 'sendemail.smtpencryption = ssl'.
+
+sendemail.<identity>.*::
+ Identity-specific versions of the 'sendemail.*' parameters
+ found below, taking precedence over those when the this
+ identity is selected, through command-line or
+ 'sendemail.identity'.
+
+sendemail.aliasesfile::
+sendemail.aliasfiletype::
+sendemail.bcc::
+sendemail.cc::
+sendemail.cccmd::
+sendemail.chainreplyto::
+sendemail.confirm::
+sendemail.envelopesender::
+sendemail.from::
+sendemail.multiedit::
+sendemail.signedoffbycc::
+sendemail.smtppass::
+sendemail.suppresscc::
+sendemail.suppressfrom::
+sendemail.to::
+sendemail.smtpserver::
+sendemail.smtpserverport::
+sendemail.smtpuser::
+sendemail.thread::
+sendemail.validate::
+ See linkgit:git-send-email[1] for description.
+
+sendemail.signedoffcc::
+ Deprecated alias for 'sendemail.signedoffbycc'.
+
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
+url.<base>.pushInsteadOf::
+ Any URL that starts with this value will not be pushed to;
+ instead, it will be rewritten to start with <base>, and the
+ resulting URL will be pushed to. In cases where some site serves
+ a large number of repositories, and serves them with multiple
+ access methods, some of which do not allow push, this feature
+ allows people to specify a pull-only URL and have git
+ automatically use an appropriate URL to push, even for a
+ never-before-seen repository on the site. When more than one
+ pushInsteadOf strings match a given URL, the longest match is
+ used. If a remote has an explicit pushurl, git will ignore this
+ setting for that remote.
+
user.email::
Your email address to be recorded in any newly created commits.
Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and