NAME
----
-git-add - Add files to the index file
+git-add - Add file contents to the changeset to be committed next
SYNOPSIS
--------
-'git-add' [-n] [-v] [--] <file>...
+'git-add' [-n] [-v] [-f] [--interactive | -i] [--] <file>...
DESCRIPTION
-----------
-A simple wrapper for git-update-index to add files to the index,
-for people used to do "cvs add".
+All the changed file contents to be committed together in a single set
+of changes must be "added" with the 'add' command before using the
+'commit' command. This is not only for adding new files. Even modified
+files must be added to the set of changes about to be committed.
+
+This command can be performed multiple times before a commit. The added
+content corresponds to the state of specified file(s) at the time the
+'add' command is used. This means the 'commit' command will not consider
+subsequent changes to already added content if it is not added again before
+the commit.
+
+The 'git status' command can be used to obtain a summary of what is included
+for the next commit.
+
+This command can be used to add ignored files with `-f` (force)
+option, but they have to be
+explicitly and exactly specified from the command line. File globbing
+and recursive behaviour do not add ignored files.
+
+Please see gitlink:git-commit[1] for alternative ways to add content to a
+commit.
OPTIONS
-------
<file>...::
- Files to add to the index.
+ Files to add content from. Fileglobs (e.g. `*.c`) can
+ be given to add all matching files. Also a
+ leading directory name (e.g. `dir` to add `dir/file1`
+ and `dir/file2`) can be given to add all files in the
+ directory, recursively.
-n::
Don't actually add the file(s), just show if they exist.
-v::
Be verbose.
+-f::
+ Allow adding otherwise ignored files.
+
+-i, \--interactive::
+ Add modified contents in the working tree interactively to
+ the index.
+
\--::
This option can be used to separate command-line options from
the list of files, (useful when filenames might be mistaken
for command-line options).
-DISCUSSION
-----------
-
-The list of <file> given to the command is fed to `git-ls-files`
-command to list files that are not registered in the index and
-are not ignored/excluded by `$GIT_DIR/info/exclude` file or
-`.gitignore` file in each directory. This means two things:
+Configuration
+-------------
-. You can put the name of a directory on the command line, and
- the command will add all files in it and its subdirectories;
-
-. Giving the name of a file that is already in index does not
- run `git-update-index` on that path.
+The optional configuration variable 'core.excludesfile' indicates a path to a
+file containing patterns of file names to exclude from git-add, similar to
+$GIT_DIR/info/exclude. Patterns in the exclude file are used in addition to
+those in info/exclude. See link:repository-layout.html[repository layout].
EXAMPLES
--------
git-add Documentation/\\*.txt::
- Adds all `\*.txt` files that are not in the index under
- `Documentation` directory and its subdirectories.
+ Adds content from all `\*.txt` files under `Documentation`
+ directory and its subdirectories.
+
Note that the asterisk `\*` is quoted from the shell in this
example; this lets the command to include the files from
git-add git-*.sh::
- Adds all git-*.sh scripts that are not in the index.
+ Considers adding content from all git-*.sh scripts.
Because this example lets shell expand the asterisk
(i.e. you are listing the files explicitly), it does not
- add `subdir/git-foo.sh` to the index.
+ consider `subdir/git-foo.sh`.
+
+Interactive mode
+----------------
+When the command enters the interactive mode, it shows the
+output of the 'status' subcommand, and then goes into its
+interactive command loop.
+
+The command loop shows the list of subcommands available, and
+gives a prompt "What now> ". In general, when the prompt ends
+with a single '>', you can pick only one of the choices given
+and type return, like this:
+
+------------
+ *** Commands ***
+ 1: status 2: update 3: revert 4: add untracked
+ 5: patch 6: diff 7: quit 8: help
+ What now> 1
+------------
+
+You also could say "s" or "sta" or "status" above as long as the
+choice is unique.
+
+The main command loop has 6 subcommands (plus help and quit).
+
+status::
+
+ This shows the change between HEAD and index (i.e. what will be
+ committed if you say "git commit"), and between index and
+ working tree files (i.e. what you could stage further before
+ "git commit" using "git-add") for each path. A sample output
+ looks like this:
++
+------------
+ staged unstaged path
+ 1: binary nothing foo.png
+ 2: +403/-35 +1/-1 git-add--interactive.perl
+------------
++
+It shows that foo.png has differences from HEAD (but that is
+binary so line count cannot be shown) and there is no
+difference between indexed copy and the working tree
+version (if the working tree version were also different,
+'binary' would have been shown in place of 'nothing'). The
+other file, git-add--interactive.perl, has 403 lines added
+and 35 lines deleted if you commit what is in the index, but
+working tree file has further modifications (one addition and
+one deletion).
+
+update::
+
+ This shows the status information and gives prompt
+ "Update>>". When the prompt ends with double '>>', you can
+ make more than one selection, concatenated with whitespace or
+ comma. Also you can say ranges. E.g. "2-5 7,9" to choose
+ 2,3,4,5,7,9 from the list. You can say '*' to choose
+ everything.
++
+What you chose are then highlighted with '*',
+like this:
++
+------------
+ staged unstaged path
+ 1: binary nothing foo.png
+* 2: +403/-35 +1/-1 git-add--interactive.perl
+------------
++
+To remove selection, prefix the input with `-`
+like this:
++
+------------
+Update>> -2
+------------
++
+After making the selection, answer with an empty line to stage the
+contents of working tree files for selected paths in the index.
+
+revert::
+
+ This has a very similar UI to 'update', and the staged
+ information for selected paths are reverted to that of the
+ HEAD version. Reverting new paths makes them untracked.
+
+add untracked::
+
+ This has a very similar UI to 'update' and
+ 'revert', and lets you add untracked paths to the index.
+
+patch::
+
+ This lets you choose one path out of 'status' like selection.
+ After choosing the path, it presents diff between the index
+ and the working tree file and asks you if you want to stage
+ the change of each hunk. You can say:
+
+ y - add the change from that hunk to index
+ n - do not add the change from that hunk to index
+ a - add the change from that hunk and all the rest to index
+ d - do not the change from that hunk nor any of the rest to index
+ j - do not decide on this hunk now, and view the next
+ undecided hunk
+ J - do not decide on this hunk now, and view the next hunk
+ k - do not decide on this hunk now, and view the previous
+ undecided hunk
+ K - do not decide on this hunk now, and view the previous hunk
++
+After deciding the fate for all hunks, if there is any hunk
+that was chosen, the index is updated with the selected hunks.
+
+diff::
+
+ This lets you review what will be committed (i.e. between
+ HEAD and index).
+
See Also
--------
+gitlink:git-status[1]
gitlink:git-rm[1]
+gitlink:git-mv[1]
+gitlink:git-commit[1]
+gitlink:git-update-index[1]
Author
------