dot-separated segment and the section name is everything before the last
dot. The variable names are case-insensitive, allow only alphanumeric
characters and `-`, and must start with an alphabetic character. Some
-variables may appear multiple times.
+variables may appear multiple times; we say then that the variable is
+multivalued.
Syntax
~~~~~~
The file consists of sections and variables. A section begins with
the name of the section in square brackets and continues until the next
-section begins. Section names are not case sensitive. Only alphanumeric
+section begins. Section names are case-insensitive. Only alphanumeric
characters, `-` and `.` are allowed in section names. Each variable
must belong to some section, which means that there must be a section
header before the first setting of a variable.
--------
Subsection names are case sensitive and can contain any characters except
-newline (doublequote `"` and backslash have to be escaped as `\"` and `\\`,
-respectively). Section headers cannot span multiple
+newline (doublequote `"` and backslash can be included by escaping them
+as `\"` and `\\`, respectively). Section headers cannot span multiple
lines. Variables may belong directly to a section or to a given subsection.
You can have `[section]` if you have `[section "subsection"]`, but you
don't need to.
All the other lines (and the remainder of the line after the section
header) are recognized as setting variables, in the form
-'name = value'. If there is no equal sign on the line, the entire line
-is taken as 'name' and the variable is recognized as boolean "true".
+'name = value' (or just 'name', which is a short-hand to say that
+the variable is the boolean "true").
The variable names are case-insensitive, allow only alphanumeric characters
-and `-`, and must start with an alphabetic character. There can be more
-than one value for a given variable; we say then that the variable is
-multivalued.
-
-Leading and trailing whitespace in a variable value is discarded.
-Internal whitespace within a variable value is retained verbatim.
+and `-`, and must start with an alphabetic character.
-The values following the equals sign in variable assign are all either
-a string, an integer, or a boolean. Boolean values may be given as yes/no,
-1/0, true/false or on/off. Case is not significant in boolean values, when
-converting value to the canonical form using '--bool' type specifier;
-'git config' will ensure that the output is "true" or "false".
+A line that defines a value can be continued to the next line by
+ending it with a `\`; the backquote and the end-of-line are
+stripped. Leading whitespaces after 'name =', the remainder of the
+line after the first comment character '#' or ';', and trailing
+whitespaces of the line are discarded unless they are enclosed in
+double quotes. Internal whitespaces within the value are retained
+verbatim.
-String values may be entirely or partially enclosed in double quotes.
-You need to enclose variable values in double quotes if you want to
-preserve leading or trailing whitespace, or if the variable value contains
-comment characters (i.e. it contains '#' or ';').
-Double quote `"` and backslash `\` characters in variable values must
-be escaped: use `\"` for `"` and `\\` for `\`.
+Inside double quotes, double quote `"` and backslash `\` characters
+must be escaped: use `\"` for `"` and `\\` for `\`.
The following escape sequences (beside `\"` and `\\`) are recognized:
`\n` for newline character (NL), `\t` for horizontal tabulation (HT, TAB)
and `\b` for backspace (BS). Other char escape sequences (including octal
escape sequences) are invalid.
-Variable values ending in a `\` are continued on the next line in the
-customary UNIX fashion.
-
-Some variables may require a special value format.
Includes
~~~~~~~~
path = foo ; expand "foo" relative to the current file
path = ~/foo ; expand "foo" in your $HOME directory
+
+Values
+~~~~~~
+
+Values of many variables are treated as a simple string, but there
+are variables that take values of specific types and there are rules
+as to how to spell them.
+
+boolean::
+
+ When a variable is said to take a boolean value, many
+ synonyms are accepted for 'true' and 'false'; these are all
+ case-insensitive.
+
+ true;; Boolean true can be spelled as `yes`, `on`, `true`,
+ or `1`. Also, a variable defined without `= <value>`
+ is taken as true.
+
+ false;; Boolean false can be spelled as `no`, `off`,
+ `false`, or `0`.
++
+When converting value to the canonical form using '--bool' type
+specifier; 'git config' will ensure that the output is "true" or
+"false" (spelled in lowercase).
+
+integer::
+ The value for many variables that specify various sizes can
+ be suffixed with `k`, `M`,... to mean "scale the number by
+ 1024", "by 1024x1024", etc.
+
+color::
+ The value for a variables that takes a color is a list of
+ colors (at most two) and attributes (at most one), separated
+ by spaces. The colors accepted are `normal`, `black`,
+ `red`, `green`, `yellow`, `blue`, `magenta`, `cyan` and
+ `white`; the attributes are `bold`, `dim`, `ul`, `blink` and
+ `reverse`. The first color given is the foreground; the
+ second is the background. The position of the attribute, if
+ any, doesn't matter. Attributes may be turned off specifically
+ by prefixing them with `no` (e.g., `noreverse`, `noul`, etc).
++
+Colors (foreground and background) may also be given as numbers between
+0 and 255; these use ANSI 256-color mode (but note that not all
+terminals may support this). If your terminal supports it, you may also
+specify 24-bit RGB values as hex, like `#ff0ab3`.
++
+The attributes are meant to be reset at the beginning of each item
+in the colored output, so setting color.decorate.branch to `black`
+will paint that branch name in a plain `black`, even if the previous
+thing on the same output line (e.g. opening parenthesis before the
+list of branch names in `log --decorate` output) is set to be
+painted with `bold` or some other attribute.
+
+
Variables
~~~~~~~~~
+
The default is true (when core.filemode is not specified in the config file).
-core.ignorecase::
+core.ignoreCase::
If true, this option enables various workarounds to enable
Git to work better on filesystems that are not case sensitive,
like FAT. For example, if a directory listing finds
"Makefile".
+
The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
-will probe and set core.ignorecase true if appropriate when the repository
+will probe and set core.ignoreCase true if appropriate when the repository
is created.
-core.precomposeunicode::
+core.precomposeUnicode::
This option is only used by Mac OS implementation of Git.
- When core.precomposeunicode=true, Git reverts the unicode decomposition
+ When core.precomposeUnicode=true, Git reverts the unicode decomposition
of filenames done by Mac OS. This is useful when sharing a repository
between Mac OS and Linux or Windows.
(Git for Windows 1.7.10 or higher is needed, or Git under cygwin 1.7).
When false, file names are handled fully transparent by Git,
which is backward compatible with older versions of Git.
+core.protectHFS::
+ If set to true, do not allow checkout of paths that would
+ be considered equivalent to `.git` on an HFS+ filesystem.
+ Defaults to `true` on Mac OS, and `false` elsewhere.
+
+core.protectNTFS::
+ If set to true, do not allow checkout of paths that would
+ cause problems with the NTFS filesystem, e.g. conflict with
+ 8.3 "short" names.
+ Defaults to `true` on Windows, and `false` elsewhere.
+
core.trustctime::
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
-core.checkstat::
+core.checkStat::
Determines which stat fields to match between the index
and work tree. The user can set this to 'default' or
'minimal'. Default (or explicitly 'default'), is to check
all fields, including the sub-second part of mtime and ctime.
-core.quotepath::
+core.quotePath::
The commands that output paths (e.g. 'ls-files',
'diff'), when not given the `-z` option, will quote
"unusual" characters in the pathname by enclosing the
proxy use, while defaulting to a common proxy for external domains.
core.ignoreStat::
- If true, commands which modify both the working tree and the index
- will mark the updated paths with the "assume unchanged" bit in the
- index. These marked files are then assumed to stay unchanged in the
- working tree, until you mark them otherwise manually - Git will not
- detect the file changes by lstat() calls. This is useful on systems
- where those are very slow, such as Microsoft Windows.
- See linkgit:git-update-index[1].
- False by default.
+ If true, Git will avoid using lstat() calls to detect if files have
+ changed by setting the "assume-unchanged" bit for those tracked files
+ which it has updated identically in both the index and working tree.
++
+When files are modified outside of Git, the user will need to stage
+the modified files explicitly (e.g. see 'Examples' section in
+linkgit:git-update-index[1]).
+Git will not normally detect changes to those files.
++
+This is useful on systems where lstat() calls are very slow, such as
+CIFS/Microsoft Windows.
++
+False by default.
core.preferSymlinkRefs::
Instead of the default "symref" format for HEAD
-1 is the zlib default. 0 means no compression,
and 1..9 are various speed/size tradeoffs, 9 being slowest.
If set, this provides a default to other compression variables,
- such as 'core.loosecompression' and 'pack.compression'.
+ such as 'core.looseCompression' and 'pack.compression'.
-core.loosecompression::
+core.looseCompression::
An integer -1..9, indicating the compression level for objects that
are not in a pack file. -1 is the zlib default. 0 means no
compression, and 1..9 are various speed/size tradeoffs, 9 being
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
-core.excludesfile::
+core.excludesFile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', Git looks into this file for patterns
of files which are not meant to be tracked. "`~/`" is expanded
If $XDG_CONFIG_HOME is either not set or empty, $HOME/.config/git/ignore
is used instead. See linkgit:gitignore[5].
-core.askpass::
+core.askPass::
Some commands (e.g. svn and http interfaces) that interactively
ask for a password can be told to use an external program given
via the value of this variable. Can be overridden by the 'GIT_ASKPASS'
prompt. The external program shall be given a suitable prompt as
command-line argument and write the password on its STDOUT.
-core.attributesfile::
+core.attributesFile::
In addition to '.gitattributes' (per-directory) and
'.git/info/attributes', Git looks into this file for attributes
(see linkgit:gitattributes[5]). Path expansions are made the same
- way as for `core.excludesfile`. Its default value is
+ way as for `core.excludesFile`. Its default value is
$XDG_CONFIG_HOME/git/attributes. If $XDG_CONFIG_HOME is either not
set or empty, $HOME/.config/git/attributes is used instead.
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
-core.commentchar::
+core.commentChar::
Commands such as `commit` and `tag` that lets you edit
messages consider a line that begins with this character
commented, and removes them after the editor returns
If set to "auto", `git-commit` would select a character that is not
the beginning character of any line in existing commit messages.
+core.packedRefsTimeout::
+ The length of time, in milliseconds, to retry when trying to
+ lock the `packed-refs` file. Value 0 means not to retry at
+ all; -1 means to try indefinitely. Default is 1000 (i.e.,
+ retry for 1 second).
+
sequence.editor::
Text editor used by `git rebase -i` for editing the rebase instruction file.
The value is meant to be interpreted by the shell when it is used.
is relevant for `indent-with-non-tab` and when Git fixes `tab-in-indent`
errors. The default tab width is 8. Allowed values are 1 to 63.
-core.fsyncobjectfiles::
+core.fsyncObjectFiles::
This boolean will enable 'fsync()' when writing object files.
+
This is a total waste of time and effort on a filesystem that orders
journalling (traditional UNIX filesystems) or that only journal metadata
and not file contents (OS X's HFS+, or Linux ext3 with "data=writeback").
-core.preloadindex::
+core.preloadIndex::
Enable parallel index preload for operations like 'git diff'
+
This can speed up operations like 'git diff' and 'git status' especially
for abbreviated object names to stay unique for sufficiently long
time.
-add.ignore-errors::
add.ignoreErrors::
+add.ignore-errors (deprecated)::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
- option of linkgit:git-add[1]. Older versions of Git accept only
- `add.ignore-errors`, which does not follow the usual naming
- convention for configuration variables. Newer versions of Git
- honor `add.ignoreErrors` as well.
+ option of linkgit:git-add[1]. `add.ignore-errors` is deprecated,
+ as it does not follow the usual naming convention for configuration
+ variables.
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
by giving '--no-keep-cr' from the command line.
See linkgit:git-am[1], linkgit:git-mailsplit[1].
-apply.ignorewhitespace::
+am.threeWay::
+ By default, `git am` will fail if the patch does not apply cleanly. When
+ set to true, this setting tells `git am` to fall back on 3-way merge if
+ the patch records the identity of blobs it is supposed to apply to and
+ we have those blobs available locally (equivalent to giving the `--3way`
+ option from the command line). Defaults to `false`.
+ See linkgit:git-am[1].
+
+apply.ignoreWhitespace::
When set to 'change', tells 'git apply' to ignore changes in
whitespace, in the same way as the '--ignore-space-change'
option.
Tells 'git apply' how to handle whitespaces, in the same way
as the '--whitespace' option. See linkgit:git-apply[1].
-branch.autosetupmerge::
+branch.autoSetupMerge::
Tells 'git branch' and 'git checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
starting point branch. Note that even if this option is not set,
local branch or remote-tracking
branch. This option defaults to true.
-branch.autosetuprebase::
+branch.autoSetupRebase::
When a new branch is created with 'git branch' or 'git checkout'
that tracks another branch, this variable tells Git to set
up pull to rebase instead of merge (see "branch.<name>.rebase").
remote-tracking branches.
When `always`, rebase will be set to true for all tracking
branches.
- See "branch.autosetupmerge" for details on how to set up a
+ See "branch.autoSetupMerge" for details on how to set up a
branch to track another branch.
This option defaults to never.
branch.<name>.remote::
When on branch <name>, it tells 'git fetch' and 'git push'
which remote to fetch from/push to. The remote to push to
- may be overridden with `remote.pushdefault` (for all branches).
+ may be overridden with `remote.pushDefault` (for all branches).
The remote to push to, for the current branch, may be further
- overridden by `branch.<name>.pushremote`. If no remote is
+ overridden by `branch.<name>.pushRemote`. If no remote is
configured, or if you are not on any branch, it defaults to
- `origin` for fetching and `remote.pushdefault` for pushing.
+ `origin` for fetching and `remote.pushDefault` for pushing.
Additionally, `.` (a period) is the current local repository
(a dot-repository), see `branch.<name>.merge`'s final note below.
-branch.<name>.pushremote::
+branch.<name>.pushRemote::
When on branch <name>, it overrides `branch.<name>.remote` for
- pushing. It also overrides `remote.pushdefault` for pushing
+ pushing. It also overrides `remote.pushDefault` for pushing
from branch <name>. When you pull from one place (e.g. your
upstream) and push to another place (e.g. your own publishing
- repository), you would want to set `remote.pushdefault` to
+ repository), you would want to set `remote.pushDefault` to
specify the remote to push to for all branches, and use this
option to override it for a specific branch.
branch.<name>.merge to the desired branch, and use the relative path
setting `.` (a period) for branch.<name>.remote.
-branch.<name>.mergeoptions::
+branch.<name>.mergeOptions::
Sets default options for merging into branch <name>. The syntax and
supported options are the same as those of linkgit:git-merge[1], but
option values containing whitespace characters are currently not
"git pull" is run. See "pull.rebase" for doing this in a non
branch-specific manner.
+
- When preserve, also pass `--preserve-merges` along to 'git rebase'
- so that locally committed merge commits will not be flattened
- by running 'git pull'.
+When preserve, also pass `--preserve-merges` along to 'git rebase'
+so that locally committed merge commits will not be flattened
+by running 'git pull'.
+
*NOTE*: this is a possibly dangerous operation; do *not* use
it unless you understand the implications (see linkgit:git-rebase[1]
`remote` (a remote-tracking branch in refs/remotes/),
`upstream` (upstream tracking branch), `plain` (other
refs).
-+
-The value for these configuration variables is a list of colors (at most
-two) and attributes (at most one), separated by spaces. The colors
-accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`,
-`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
-`blink` and `reverse`. The first color given is the foreground; the
-second is the background. The position of the attribute, if any,
-doesn't matter.
color.diff::
Whether to use ANSI escape sequences to add color to patches.
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
- of `plain` (context text), `meta` (metainformation), `frag`
+ of `context` (context text - `plain` is a historical synonym),
+ `meta` (metainformation), `frag`
(hunk header), 'func' (function in hunk header), `old` (removed lines),
`new` (added lines), `commit` (commit headers), or `whitespace`
- (highlighting whitespace errors). The values of these variables may be
- specified as in color.branch.<slot>.
+ (highlighting whitespace errors).
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
separators between fields on a line (`:`, `-`, and `=`)
and between hunks (`--`)
--
-+
-The values of these variables may be specified as in color.branch.<slot>.
color.interactive::
When set to `always`, always use colors for interactive prompts
Use customized color for 'git add --interactive' and 'git clean
--interactive' output. `<slot>` may be `prompt`, `header`, `help`
or `error`, for four distinct types of normal output from
- interactive commands. The values of these variables may be
- specified as in color.branch.<slot>.
+ interactive commands.
color.pager::
A boolean to enable/disable colored output when the pager is in
use (default is true).
-color.showbranch::
+color.showBranch::
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
`false` (or `never`) or `auto` (or `true`), in which case colors are used
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
`untracked` (files which are not tracked by Git),
- `branch` (the current branch), or
+ `branch` (the current branch),
`nobranch` (the color the 'no branch' warning is shown in, defaulting
- to red). The values of these variables may be specified as in
- color.branch.<slot>.
+ to red), or
+ `unmerged` (files which have unmerged changes).
color.ui::
This variable determines the default value for variables such
have to remove the help lines that begin with `#` in the commit log
template yourself, if you do this).
-commit.gpgsign::
+commit.gpgSign::
A boolean to specify whether all commits should be GPG signed.
Use of this option when doing operations such as rebase can
by mail. See the --to and --cc options in
linkgit:git-format-patch[1].
-format.subjectprefix::
+format.subjectPrefix::
The default for format-patch is to output files with the '[PATCH]'
subject prefix. Use this variable to change that prefix.
Set this variable to the empty string ("") to suppress
signature generation.
-format.signaturefile::
+format.signatureFile::
Works just like format.signature except the contents of the
file specified by this variable will be used as the signature.
A true boolean value is the same as `shallow`, and a false
value disables threading.
-format.signoff::
+format.signOff::
A boolean value which lets you enable the `-s/--signoff` option of
format-patch by default. *Note:* Adding the Signed-off-by: line to a
patch should be a conscious act and means that you certify you have
object to a worktree file upon checkout. See
linkgit:gitattributes[5] for details.
+fsck.<msg-id>::
+ Allows overriding the message type (error, warn or ignore) of a
+ specific message ID such as `missingEmail`.
++
+For convenience, fsck prefixes the error/warning with the message ID,
+e.g. "missingEmail: invalid author/committer line - missing email" means
+that setting `fsck.missingEmail = ignore` will hide that issue.
++
+This feature is intended to support working with legacy repositories
+which cannot be repaired without disruptive changes.
+
+fsck.skipList::
+ The path to a sorted list of object names (i.e. one SHA-1 per
+ line) that are known to be broken in a non-fatal way and should
+ be ignored. This feature is useful when an established project
+ should be accepted despite early commits containing errors that
+ can be safely ignored such as invalid committer email addresses.
+ Note: corrupt objects cannot be skipped with this setting.
+
gc.aggressiveDepth::
The depth parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
light-weight garbage collection from time to time. The
default value is 6700. Setting this to 0 disables it.
-gc.autopacklimit::
+gc.autoPackLimit::
When there are more than this many packs that are not
marked with `*.keep` file in the repository, `git gc
--auto` consolidates them into one larger pack. The
default value is 50. Setting this to 0 disables it.
-gc.autodetach::
+gc.autoDetach::
Make `git gc --auto` return immediately and run in background
if the system supports it. Default is true.
-gc.packrefs::
+gc.packRefs::
Running `git pack-refs` in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
transports such as HTTP. This variable determines whether
to enable it within all non-bare repos or it can be set to a
boolean value. The default is `true`.
-gc.pruneexpire::
+gc.pruneExpire::
When 'git gc' is run, it will call 'prune --expire 2.weeks.ago'.
Override the grace period with this config variable. The value
- "now" may be used to disable this grace period and always prune
- unreachable objects immediately.
+ "now" may be used to disable this grace period and always prune
+ unreachable objects immediately, or "never" may be used to
+ suppress pruning.
-gc.pruneworktreesexpire::
- When 'git gc' is run, it will call
+gc.worktreePruneExpire::
When 'git gc' is run, it calls
'git worktree prune --expire 3.months.ago'.
This config variable can be used to set a different grace
period. The value "now" may be used to disable the grace
- period and prune $GIT_DIR/worktrees immediately.
+ period and prune $GIT_DIR/worktrees immediately, or "never"
+ may be used to suppress pruning.
-gc.reflogexpire::
-gc.<pattern>.reflogexpire::
+gc.reflogExpire::
+gc.<pattern>.reflogExpire::
'git reflog expire' removes reflog entries older than
- this time; defaults to 90 days. With "<pattern>" (e.g.
+ this time; defaults to 90 days. The value "now" expires all
+ entries immediately, and "never" suppresses expiration
+ altogether. With "<pattern>" (e.g.
"refs/stash") in the middle the setting applies only to
the refs that match the <pattern>.
-gc.reflogexpireunreachable::
-gc.<ref>.reflogexpireunreachable::
+gc.reflogExpireUnreachable::
+gc.<pattern>.reflogExpireUnreachable::
'git reflog expire' removes reflog entries older than
this time and are not reachable from the current tip;
- defaults to 30 days. With "<pattern>" (e.g. "refs/stash")
+ defaults to 30 days. The value "now" expires all entries
+ immediately, and "never" suppresses expiration altogether.
+ With "<pattern>" (e.g. "refs/stash")
in the middle, the setting applies only to the refs that
match the <pattern>.
-gc.rerereresolved::
+gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
The default is 60 days. See linkgit:git-rerere[1].
-gc.rerereunresolved::
+gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
The default is 15 days. See linkgit:git-rerere[1].
-gitcvs.commitmsgannotation::
+gitcvs.commitMsgAnnotation::
Append this string to each commit message. Set to empty string
to disable this feature. Defaults to "via git-CVS emulator".
Whether the CVS server interface is enabled for this repository.
See linkgit:git-cvsserver[1].
-gitcvs.logfile::
+gitcvs.logFile::
Path to a log file where the CVS server interface well... logs
various stuff. See linkgit:git-cvsserver[1].
treat it as text. If they suppress text conversion, the file
will be set with '-kb' mode, which suppresses any newline munging
the client might otherwise do. If the attributes do not allow
- the file type to be determined, then 'gitcvs.allbinary' is
+ the file type to be determined, then 'gitcvs.allBinary' is
used. See linkgit:gitattributes[5].
-gitcvs.allbinary::
+gitcvs.allBinary::
This is used if 'gitcvs.usecrlfattr' does not resolve
the correct '-kb' mode to use. If true, all
unresolved files are sent to the client in
then the contents of the file are examined to decide if
it is binary, similar to 'core.autocrlf'.
-gitcvs.dbname::
+gitcvs.dbName::
Database used by git-cvsserver to cache revision information
derived from the Git repository. The exact meaning depends on the
used database driver, for SQLite (which is the default driver) this
linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
Default: '%Ggitcvs.%m.sqlite'
-gitcvs.dbdriver::
+gitcvs.dbDriver::
Used Perl DBI driver. You can specify any available driver
for this here, but it might not work. git-cvsserver is tested
with 'DBD::SQLite', reported to work with 'DBD::Pg', and
May not contain double colons (`:`). Default: 'SQLite'.
See linkgit:git-cvsserver[1].
-gitcvs.dbuser, gitcvs.dbpass::
- Database user and password. Only useful if setting 'gitcvs.dbdriver',
+gitcvs.dbUser, gitcvs.dbPass::
+ Database user and password. Only useful if setting 'gitcvs.dbDriver',
since SQLite has no concept of database users and/or passwords.
- 'gitcvs.dbuser' supports variable substitution (see
+ 'gitcvs.dbUser' supports variable substitution (see
linkgit:git-cvsserver[1] for details).
gitcvs.dbTableNamePrefix::
characters will be replaced with underscores.
All gitcvs variables except for 'gitcvs.usecrlfattr' and
-'gitcvs.allbinary' can also be specified as
+'gitcvs.allBinary' can also be specified as
'gitcvs.<access_method>.<varname>' (where 'access_method'
is one of "ext" and "pserver") to make them apply only for the given
access method.
gitweb.patches::
gitweb.pickaxe::
gitweb.remote_heads::
-gitweb.showsizes::
+gitweb.showSizes::
gitweb.snapshot::
See linkgit:gitweb.conf[5] for description.
signed, and the program is expected to send the result to its
standard output.
-gui.commitmsgwidth::
+gui.commitMsgWidth::
Defines how wide the commit message window is in the
linkgit:git-gui[1]. "75" is the default.
-gui.diffcontext::
+gui.diffContext::
Specifies how many context lines should be used in calls to diff
made by the linkgit:git-gui[1]. The default is "5".
-gui.displayuntracked::
+gui.displayUntracked::
Determines if linkgit::git-gui[1] shows untracked files
in the file list. The default is "true".
If this option is not set, the tools default to the
locale encoding.
-gui.matchtrackingbranch::
+gui.matchTrackingBranch::
Determines if new branches created with linkgit:git-gui[1] should
default to tracking remote branches with matching names or
not. Default: "false".
-gui.newbranchtemplate::
+gui.newBranchTemplate::
Is used as suggested name when creating new branches using the
linkgit:git-gui[1].
-gui.pruneduringfetch::
+gui.pruneDuringFetch::
"true" if linkgit:git-gui[1] should prune remote-tracking branches when
performing a fetch. The default value is "false".
Determines if linkgit:git-gui[1] should trust the file modification
timestamp or not. By default the timestamps are not trusted.
-gui.spellingdictionary::
+gui.spellingDictionary::
Specifies the dictionary used for spell checking commit messages in
the linkgit:git-gui[1]. When set to "none" spell checking is turned
off.
-gui.fastcopyblame::
+gui.fastCopyBlame::
If true, 'git gui blame' uses `-C` instead of `-C -C` for original
location detection. It makes blame significantly faster on huge
repositories at the expense of less thorough copy detection.
-gui.copyblamethreshold::
+gui.copyBlameThreshold::
Specifies the threshold to use in 'git gui blame' original location
detection, measured in alphanumeric characters. See the
linkgit:git-blame[1] manual for more information on copy detection.
'FILENAME', and the name of the current branch as 'CUR_BRANCH' (if
the head is detached, 'CUR_BRANCH' is empty).
-guitool.<name>.needsfile::
+guitool.<name>.needsFile::
Run the tool only if a diff is selected in the GUI. It guarantees
that 'FILENAME' is not empty.
-guitool.<name>.noconsole::
+guitool.<name>.noConsole::
Run the command silently, without creating a window to display its
output.
-guitool.<name>.norescan::
+guitool.<name>.noRescan::
Don't rescan the working directory for changes after the tool
finishes execution.
guitool.<name>.confirm::
Show a confirmation dialog before actually running the tool.
-guitool.<name>.argprompt::
+guitool.<name>.argPrompt::
Request a string argument from the user, and pass it to the tool
through the 'ARGS' environment variable. Since requesting an
argument implies confirmation, the 'confirm' option has no effect
the dialog uses a built-in generic prompt; otherwise the exact
value of the variable is used.
-guitool.<name>.revprompt::
+guitool.<name>.revPrompt::
Request a single valid revision from the user, and set the
'REVISION' environment variable. In other aspects this option
- is similar to 'argprompt', and can be used together with it.
+ is similar to 'argPrompt', and can be used together with it.
-guitool.<name>.revunmerged::
- Show only unmerged branches in the 'revprompt' subdialog.
+guitool.<name>.revUnmerged::
+ Show only unmerged branches in the 'revPrompt' subdialog.
This is useful for tools similar to merge or rebase, but not
for things like checkout or reset.
guitool.<name>.prompt::
Specifies the general prompt string to display at the top of
- the dialog, before subsections for 'argprompt' and 'revprompt'.
+ the dialog, before subsections for 'argPrompt' and 'revPrompt'.
The default value includes the actual command.
help.browser::
Values 'man', 'info', 'web' and 'html' are supported. 'man' is
the default. 'web' and 'html' are the same.
-help.autocorrect::
+help.autoCorrect::
Automatically correct and execute mistyped commands after
waiting for the given number of deciseconds (0.1 sec). If more
than one command can be deduced from the entered text, nothing
value is 0 - the command will be just shown but not executed.
This is the default.
-help.htmlpath::
+help.htmlPath::
Specify the path where the HTML documentation resides. File system paths
and URLs are supported. HTML pages will be prefixed with this path when
help is displayed in the 'web' format. This defaults to the documentation
`curl(1)`). This can be overridden on a per-remote basis; see
remote.<name>.proxy
-http.cookiefile::
+http.cookieFile::
File containing previously stored cookie lines which should be used
in the Git http session, if they match the server. The file format
of the file to read cookies from should be plain HTTP headers or
the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
- NOTE that the file specified with http.cookiefile is only used as
+ NOTE that the file specified with http.cookieFile is only used as
input unless http.saveCookies is set.
-http.savecookies::
+http.saveCookies::
If set, store cookies received during requests to the file specified by
- http.cookiefile. Has no effect if http.cookiefile is unset.
+ http.cookieFile. Has no effect if http.cookieFile is unset.
+
+http.sslVersion::
+ The SSL version to use when negotiating an SSL connection, if you
+ want to force the default. The available and default version
+ depend on whether libcurl was built against NSS or OpenSSL and the
+ particular configuration of the crypto library in use. Internally
+ this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl
+ documentation for more details on the format of this option and
+ for the ssl version supported. Actually the possible values of
+ this option are:
+
+ - sslv2
+ - sslv3
+ - tlsv1
+ - tlsv1.0
+ - tlsv1.1
+ - tlsv1.2
+
++
+Can be overridden by the 'GIT_SSL_VERSION' environment variable.
+To force git to use libcurl's default ssl version and ignore any
+explicit http.sslversion option, set 'GIT_SSL_VERSION' to the
+empty string.
+
+http.sslCipherList::
+ A list of SSL ciphers to use when negotiating an SSL connection.
+ The available ciphers depend on whether libcurl was built against
+ NSS or OpenSSL and the particular configuration of the crypto
+ library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST'
+ option; see the libcurl documentation for more details on the format
+ of this list.
++
+Can be overridden by the 'GIT_SSL_CIPHER_LIST' environment variable.
+To force git to use libcurl's default cipher list and ignore any
+explicit http.sslCipherList option, set 'GIT_SSL_CIPHER_LIST' to the
+empty string.
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'
environment variable. Default is false (curl will use EPSV).
-http.useragent::
+http.userAgent::
The HTTP USER_AGENT string presented to an HTTP server. The default
value represents the version of the client Git such as git/1.7.1.
This option allows you to override this value to a more common value
Specify the version with which new index files should be
initialized. This does not affect existing repositories.
-init.templatedir::
+init.templateDir::
Specify the directory from which templates will be copied.
(See the "TEMPLATE DIRECTORY" section of linkgit:git-init[1].)
If true the web server started by linkgit:git-instaweb[1] will
be bound to the local IP (127.0.0.1).
-instaweb.modulepath::
+instaweb.modulePath::
The default module path for linkgit:git-instaweb[1] to use
instead of /usr/lib/apache2/modules. Only used if httpd
is Apache.
The port number to bind the gitweb httpd to. See
linkgit:git-instaweb[1].
-interactive.singlekey::
+interactive.singleKey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
Currently this is used by the `--patch` mode of
specified, the full ref name (including prefix) will be printed.
This is the same as the log commands '--decorate' option.
-log.showroot::
+log.showRoot::
If true, the initial commit will be shown as a big creation event.
This is equivalent to a diff against an empty tree.
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
linkgit:git-whatchanged[1] assume `--use-mailmap`.
+mailinfo.scissors::
+ If true, makes linkgit:git-mailinfo[1] (and therefore
+ linkgit:git-am[1]) act by default as if the --scissors option
+ was provided on the command-line. When active, this features
+ removes everything from the message body before a scissors
+ line (i.e. consisting mainly of ">8", "8<" and "-").
+
mailmap.file::
The location of an augmenting mailmap file. The default
mailmap, located in the root of the repository, is loaded
mergetool.prompt::
Prompt before each invocation of the merge resolution program.
+notes.mergeStrategy::
+ Which merge strategy to choose by default when resolving notes
+ conflicts. Must be one of `manual`, `ours`, `theirs`, `union`, or
+ `cat_sort_uniq`. Defaults to `manual`. See "NOTES MERGE STRATEGIES"
+ section of linkgit:git-notes[1] for more information on each strategy.
+
+notes.<name>.mergeStrategy::
+ Which merge strategy to choose when doing a notes merge into
+ refs/notes/<name>. This overrides the more general
+ "notes.mergeStrategy". See the "NOTES MERGE STRATEGIES" section in
+ linkgit:git-notes[1] for more information on the available strategies.
+
notes.displayRef::
The (fully qualified) refname from which to show notes when
showing commit messages. The value of this variable can be set
When copying notes during a rewrite (see the
"notes.rewrite.<command>" option), determines what to do if
the target commit already has a note. Must be one of
- `overwrite`, `concatenate`, or `ignore`. Defaults to
- `concatenate`.
+ `overwrite`, `concatenate`, `cat_sort_uniq`, or `ignore`.
+ Defaults to `concatenate`.
+
This setting can be overridden with the `GIT_NOTES_REWRITE_MODE`
environment variable.
true. You should not generally need to turn this off unless
you are debugging pack bitmaps.
-pack.writebitmaps::
+pack.writeBitmaps (deprecated)::
This is a deprecated synonym for `repack.writeBitmaps`.
pack.writeBitmapHashCache::
a case (equivalent to giving the `--no-ff` option from the command
line). When set to `only`, only such fast-forward merges are
allowed (equivalent to giving the `--ff-only` option from the
- command line).
+ command line). This setting overrides `merge.ff` when pulling.
pull.rebase::
When true, rebase branches on top of the fetched branch, instead
pull" is run. See "branch.<name>.rebase" for setting this on a
per-branch basis.
+
- When preserve, also pass `--preserve-merges` along to 'git rebase'
- so that locally committed merge commits will not be flattened
- by running 'git pull'.
+When preserve, also pass `--preserve-merges` along to 'git rebase'
+so that locally committed merge commits will not be flattened
+by running 'git pull'.
+
*NOTE*: this is a possibly dangerous operation; do *not* use
it unless you understand the implications (see linkgit:git-rebase[1]
--
+push.followTags::
+ If set to true enable '--follow-tags' option by default. You
+ may override this configuration at time of push by specifying
+ '--no-follow-tags'.
+
+push.gpgSign::
+ May be set to a boolean value, or the string 'if-asked'. A true
+ value causes all pushes to be GPG signed, as if '--signed' is
+ passed to linkgit:git-push[1]. The string 'if-asked' causes
+ pushes to be signed if the server supports it, as if
+ '--signed=if-asked' is passed to 'git push'. A false value may
+ override a value from a lower-priority config file. An explicit
+ command-line flag always overrides this config option.
+
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
rebase. False by default.
-rebase.autosquash::
+rebase.autoSquash::
If set to true enable '--autosquash' option by default.
-rebase.autostash::
+rebase.autoStash::
When set to true, automatically create a temporary stash
before the operation begins, and apply it after the operation
ends. This means that you can run rebase on a dirty worktree.
successful rebase might result in non-trivial conflicts.
Defaults to false.
+rebase.missingCommitsCheck::
+ If set to "warn", git rebase -i will print a warning if some
+ commits are removed (e.g. a line was deleted), however the
+ rebase will still proceed. If set to "error", it will print
+ the previous warning and stop the rebase, 'git rebase
+ --edit-todo' can then be used to correct the error. If set to
+ "ignore", no checking is done.
+ To drop a commit without warning or error, use the `drop`
+ command in the todo-list.
+ Defaults to "ignore".
+
+rebase.instructionFormat
+ A format string, as specified in linkgit:git-log[1], to be used for
+ the instruction list during an interactive rebase. The format will automatically
+ have the long commit hash prepended to the format.
+
+receive.advertiseAtomic::
+ By default, git-receive-pack will advertise the atomic push
+ capability to its clients. If you don't want to this capability
+ to be advertised, set this variable to false.
+
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop
it by setting this variable to false.
-receive.certnonceseed::
+receive.certNonceSeed::
By setting this variable to a string, `git receive-pack`
will accept a `git push --signed` and verifies it by using
a "nonce" protected by HMAC using this string as a secret
key.
-receive.certnonceslop::
+receive.certNonceSlop::
When a `git push --signed` sent a push certificate with a
"nonce" that was issued by a receive-pack serving the same
repository within this many seconds, export the "nonce"
Defaults to false. If not set, the value of `transfer.fsckObjects`
is used instead.
+receive.fsck.<msg-id>::
+ When `receive.fsckObjects` is set to true, errors can be switched
+ to warnings and vice versa by configuring the `receive.fsck.<msg-id>`
+ setting where the `<msg-id>` is the fsck message ID and the value
+ is one of `error`, `warn` or `ignore`. For convenience, fsck prefixes
+ the error/warning with the message ID, e.g. "missingEmail: invalid
+ author/committer line - missing email" means that setting
+ `receive.fsck.missingEmail = ignore` will hide that issue.
++
+This feature is intended to support working with legacy repositories
+which would not pass pushing when `receive.fsckObjects = true`, allowing
+the host to accept repositories with certain known issues but still catch
+other issues.
+
+receive.fsck.skipList::
+ The path to a sorted list of object names (i.e. one SHA-1 per
+ line) that are known to be broken in a non-fatal way and should
+ be ignored. This feature is useful when an established project
+ should be accepted despite early commits containing errors that
+ can be safely ignored such as invalid committer email addresses.
+ Note: corrupt objects cannot be skipped with this setting.
+
receive.unpackLimit::
If the number of objects received in a push is below this
limit then the objects will be unpacked into loose object
print a warning of such a push to stderr, but allow the push to
proceed. If set to false or "ignore", allow such pushes with no
message. Defaults to "refuse".
++
+Another option is "updateInstead" which will update the working
+tree if pushing into the current branch. This option is
+intended for synchronizing working directories when one side is not easily
+accessible via interactive ssh (e.g. a live web site, hence the requirement
+that the working directory be clean). This mode also comes in handy when
+developing inside a VM to test and fix code on different Operating Systems.
++
+By default, "updateInstead" will refuse the push if the working tree or
+the index have any difference from the HEAD, but the `push-to-checkout`
+hook can be used to customize this. See linkgit:githooks[5].
receive.denyNonFastForwards::
If set to true, git-receive-pack will deny a ref update which is
even if that push is forced. This configuration variable is
set when initializing a shared repository.
-receive.hiderefs::
- String(s) `receive-pack` uses to decide which refs to omit
- from its initial advertisement. Use more than one
- definitions to specify multiple prefix strings. A ref that
- are under the hierarchies listed on the value of this
- variable is excluded, and is hidden when responding to `git
- push`, and an attempt to update or delete a hidden ref by
- `git push` is rejected.
+receive.hideRefs::
+ This variable is the same as `transfer.hideRefs`, but applies
+ only to `receive-pack` (and so affects pushes, but not fetches).
+ An attempt to update or delete a hidden ref by `git push` is
+ rejected.
-receive.updateserverinfo::
+receive.updateServerInfo::
If set to true, git-receive-pack will run git-update-server-info
after receiving data from git-push and updating refs.
-receive.shallowupdate::
+receive.shallowUpdate::
If set to true, .git/shallow can be updated when new refs
require new shallow roots. Otherwise those refs are rejected.
-remote.pushdefault::
+remote.pushDefault::
The remote to push to by default. Overrides
`branch.<name>.remote` for all branches, and is overridden by
- `branch.<name>.pushremote` for specific branches.
+ `branch.<name>.pushRemote` for specific branches.
remote.<name>.url::
The URL of a remote repository. See linkgit:git-fetch[1] or
remote.<name>.receivepack::
The default program to execute on the remote side when pushing. See
- option \--receive-pack of linkgit:git-push[1].
+ option --receive-pack of linkgit:git-push[1].
remote.<name>.uploadpack::
The default program to execute on the remote side when fetching. See
- option \--upload-pack of linkgit:git-fetch-pack[1].
+ option --upload-pack of linkgit:git-fetch-pack[1].
-remote.<name>.tagopt::
- Setting this value to \--no-tags disables automatic tag following when
- fetching from remote <name>. Setting it to \--tags will fetch every
+remote.<name>.tagOpt::
+ Setting this value to --no-tags disables automatic tag following when
+ fetching from remote <name>. Setting it to --tags will fetch every
tag from remote <name>, even if they are not reachable from remote
branch heads. Passing these flags directly to linkgit:git-fetch[1] can
- override this setting. See options \--tags and \--no-tags of
+ override this setting. See options --tags and --no-tags of
linkgit:git-fetch[1].
remote.<name>.vcs::
The list of remotes which are fetched by "git remote update
<group>". See linkgit:git-remote[1].
-repack.usedeltabaseoffset::
+repack.useDeltaBaseOffset::
By default, linkgit:git-repack[1] creates packs that use
delta-base offset. If you need to share your repository with
Git older than version 1.4.4, either directly or via a dumb
space and extra time spent on the initial repack. Defaults to
false.
-rerere.autoupdate::
+rerere.autoUpdate::
When set to true, `git-rerere` updates the index with the
resulting contents after it cleanly resolves conflicts using
previously recorded resolution. Defaults to false.
values in the 'sendemail' section. The default identity is
the value of 'sendemail.identity'.
-sendemail.smtpencryption::
+sendemail.smtpEncryption::
See linkgit:git-send-email[1] for description. Note that this
setting is not subject to the 'identity' mechanism.
-sendemail.smtpssl::
- Deprecated alias for 'sendemail.smtpencryption = ssl'.
+sendemail.smtpssl (deprecated)::
+ Deprecated alias for 'sendemail.smtpEncryption = ssl'.
sendemail.smtpsslcertpath::
Path to ca-certificates (either a directory or a single file).
identity is selected, through command-line or
'sendemail.identity'.
-sendemail.aliasesfile::
-sendemail.aliasfiletype::
+sendemail.aliasesFile::
+sendemail.aliasFileType::
sendemail.annotate::
sendemail.bcc::
sendemail.cc::
-sendemail.cccmd::
-sendemail.chainreplyto::
+sendemail.ccCmd::
+sendemail.chainReplyTo::
sendemail.confirm::
-sendemail.envelopesender::
+sendemail.envelopeSender::
sendemail.from::
-sendemail.multiedit::
+sendemail.multiEdit::
sendemail.signedoffbycc::
-sendemail.smtppass::
+sendemail.smtpPass::
sendemail.suppresscc::
-sendemail.suppressfrom::
+sendemail.suppressFrom::
sendemail.to::
-sendemail.smtpdomain::
-sendemail.smtpserver::
-sendemail.smtpserverport::
-sendemail.smtpserveroption::
-sendemail.smtpuser::
+sendemail.smtpDomain::
+sendemail.smtpServer::
+sendemail.smtpServerPort::
+sendemail.smtpServerOption::
+sendemail.smtpUser::
sendemail.thread::
+sendemail.transferEncoding::
sendemail.validate::
+sendemail.xmailer::
See linkgit:git-send-email[1] for description.
-sendemail.signedoffcc::
+sendemail.signedoffcc (deprecated)::
Deprecated alias for 'sendemail.signedoffbycc'.
showbranch.default::
This variable can be overridden with the -u|--untracked-files option
of linkgit:git-status[1] and linkgit:git-commit[1].
-status.submodulesummary::
+status.submoduleSummary::
Defaults to false.
If this is set to a non zero number or true (identical to -1 or an
unlimited number), the submodule summary will be enabled and a
submodule.<name>.path::
submodule.<name>.url::
+ The path within this project and URL for a submodule. These
+ variables are initially populated by 'git submodule init'. See
+ linkgit:git-submodule[1] and linkgit:gitmodules[5] for
+ details.
+
submodule.<name>.update::
- The path within this project, URL, and the updating strategy
- for a submodule. These variables are initially populated
- by 'git submodule init'; edit them to override the
- URL and other values found in the `.gitmodules` file. See
- linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+ The default update procedure for a submodule. This variable
+ is populated by `git submodule init` from the
+ linkgit:gitmodules[5] file. See description of 'update'
+ command in linkgit:git-submodule[1].
submodule.<name>.branch::
The remote branch name for a submodule, used by `git submodule
not set, the value of this variable is used instead.
Defaults to false.
-transfer.hiderefs::
- This variable can be used to set both `receive.hiderefs`
- and `uploadpack.hiderefs` at the same time to the same
- values. See entries for these other variables.
+transfer.hideRefs::
+ String(s) `receive-pack` and `upload-pack` use to decide which
+ refs to omit from their initial advertisements. Use more than
+ one definition to specify multiple prefix strings. A ref that is
+ under the hierarchies listed in the value of this variable is
+ excluded, and is hidden when responding to `git push` or `git
+ fetch`. See `receive.hideRefs` and `uploadpack.hideRefs` for
+ program-specific versions of this config.
++
+You may also include a `!` in front of the ref name to negate the entry,
+explicitly exposing it, even if an earlier entry marked it as hidden.
+If you have multiple hideRefs values, later entries override earlier ones
+(and entries in more-specific config files override less-specific ones).
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
linkgit:git-upload-archive[1] for more details. Defaults to
`false`.
-uploadpack.hiderefs::
- String(s) `upload-pack` uses to decide which refs to omit
- from its initial advertisement. Use more than one
- definitions to specify multiple prefix strings. A ref that
- are under the hierarchies listed on the value of this
- variable is excluded, and is hidden from `git ls-remote`,
- `git fetch`, etc. An attempt to fetch a hidden ref by `git
- fetch` will fail. See also `uploadpack.allowtipsha1inwant`.
-
-uploadpack.allowtipsha1inwant::
- When `uploadpack.hiderefs` is in effect, allow `upload-pack`
+uploadpack.hideRefs::
+ This variable is the same as `transfer.hideRefs`, but applies
+ only to `upload-pack` (and so affects only fetches, not pushes).
+ An attempt to fetch a hidden ref by `git fetch` will fail. See
+ also `uploadpack.allowTipSHA1InWant`.
+
+uploadpack.allowTipSHA1InWant::
+ When `uploadpack.hideRefs` is in effect, allow `upload-pack`
to accept a fetch request that asks for an object at the tip
of a hidden ref (by default, such a request is rejected).
- see also `uploadpack.hiderefs`.
+ see also `uploadpack.hideRefs`.
-uploadpack.keepalive::
+uploadpack.allowReachableSHA1InWant::
+ Allow `upload-pack` to accept a fetch request that asks for an
+ object that is reachable from any ref tip. However, note that
+ calculating object reachability is computationally expensive.
+ Defaults to `false`.
+
+uploadpack.keepAlive::
When `upload-pack` has started `pack-objects`, there may be a
quiet period while `pack-objects` prepares the pack. Normally
it would output progress information, but if `--quiet` was used
the pack data begins. Some clients and networks may consider
the server to be hung and give up. Setting this option instructs
`upload-pack` to send an empty keepalive packet every
- `uploadpack.keepalive` seconds. Setting this option to 0
+ `uploadpack.keepAlive` seconds. Setting this option to 0
disables keepalive packets entirely. The default is 5 seconds.
url.<base>.insteadOf::
Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'
environment variables. See linkgit:git-commit-tree[1].
-user.signingkey::
+user.signingKey::
If linkgit:git-tag[1] or linkgit:git-commit[1] is not selecting the
key you want it to automatically when creating a signed tag or
commit, you can override the default selection with this variable.
This option is passed unchanged to gpg's --local-user parameter,
so you may specify a key using any method that gpg supports.
+versionsort.prereleaseSuffix::
+ When version sort is used in linkgit:git-tag[1], prerelease
+ tags (e.g. "1.0-rc1") may appear after the main release
+ "1.0". By specifying the suffix "-rc" in this variable,
+ "1.0-rc1" will appear before "1.0".
++
+This variable can be specified multiple times, once per suffix. The
+order of suffixes in the config file determines the sorting order
+(e.g. if "-pre" appears before "-rc" in the config file then 1.0-preXX
+is sorted before 1.0-rcXX). The sorting order between different
+suffixes is undefined if they are in multiple config files.
+
web.browser::
Specify a web browser that may be used by some commands.
Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]