-CVS annotate.
+git for CVS users
+=================
-The core GIT itself does not have a "cvs annotate" equivalent.
-It has something that you may want to use when you would use
-"cvs annotate".
+So you're a CVS user. That's OK, it's a treatable condition. The job of
+this document is to put you on the road to recovery, by helping you
+convert an existing cvs repository to git, and by showing you how to use a
+git repository in a cvs-like fashion.
+
+Some basic familiarity with git is required. This
+link:tutorial.html[tutorial introduction to git] should be sufficient.
+
+First, note some ways that git differs from CVS:
+
+ * Commits are atomic and project-wide, not per-file as in CVS.
+
+ * Offline work is supported: you can make multiple commits locally,
+ then submit them when you're ready.
+
+ * Branching is fast and easy.
+
+ * Every working tree contains a repository with a full copy of the
+ project history, and no repository is inherently more important than
+ any other. However, you can emulate the CVS model by designating a
+ single shared repository which people can synchronize with; see below
+ for details.
+
+Importing a CVS archive
+-----------------------
+
+First, install version 2.1 or higher of cvsps from
+link:http://www.cobite.com/cvsps/[http://www.cobite.com/cvsps/] and make
+sure it is in your path. The magic command line is then
+
+-------------------------------------------
+$ git cvsimport -v -d <cvsroot> -C <destination> <module>
+-------------------------------------------
+
+This puts a git archive of the named CVS module in the directory
+<destination>, which will be created if necessary. The -v option makes
+the conversion script very chatty.
+
+The import checks out from CVS every revision of every file. Reportedly
+cvsimport can average some twenty revisions per second, so for a
+medium-sized project this should not take more than a couple of minutes.
+Larger projects or remote repositories may take longer.
+
+The main trunk is stored in the git branch named `origin`, and additional
+CVS branches are stored in git branches with the same names. The most
+recent version of the main trunk is also left checked out on the `master`
+branch, so you can start adding your own changes right away.
+
+The import is incremental, so if you call it again next month it will
+fetch any CVS updates that have been made in the meantime. For this to
+work, you must not modify the imported branches; instead, create new
+branches for your own changes, and merge in the imported branches as
+necessary.
+
+Development Models
+------------------
+
+CVS users are accustomed to giving a group of developers commit access to
+a common repository. In the next section we'll explain how to do this
+with git. However, the distributed nature of git allows other development
+models, and you may want to first consider whether one of them might be a
+better fit for your project.
+
+For example, you can choose a single person to maintain the project's
+primary public repository. Other developers then clone this repository
+and each work in their own clone. When they have a series of changes that
+they're happy with, they ask the maintainer to pull from the branch
+containing the changes. The maintainer reviews their changes and pulls
+them into the primary repository, which other developers pull from as
+necessary to stay coordinated. The Linux kernel and other projects use
+variants of this model.
+
+With a small group, developers may just pull changes from each other's
+repositories without the need for a central maintainer.
+
+Emulating the CVS Development Model
+-----------------------------------
+
+Start with an ordinary git working directory containing the project, and
+remove the checked-out files, keeping just the bare .git directory:
+
+------------------------------------------------
+$ mv project/.git /pub/repo.git
+$ rm -r project/
+------------------------------------------------
+
+Next, give every team member read/write access to this repository. One
+easy way to do this is to give all the team members ssh access to the
+machine where the repository is hosted. If you don't want to give them a
+full shell on the machine, there is a restricted shell which only allows
+users to do git pushes and pulls; see gitlink:git-shell[1].
+
+Put all the committers in the same group, and make the repository
+writable by that group:
+
+------------------------------------------------
+$ chgrp -R $group repo.git
+$ find repo.git -mindepth 1 -type d |xargs chmod ug+rwx,g+s
+$ GIT_DIR=repo.git git repo-config core.sharedrepository true
+------------------------------------------------
+
+Make sure committers have a umask of at most 027, so that the directories
+they create are writable and searchable by other group members.
+
+Suppose this repository is now set up in /pub/repo.git on the host
+foo.com. Then as an individual committer you can clone the shared
+repository:
+
+------------------------------------------------
+$ git clone foo.com:/pub/repo.git/ my-project
+$ cd my-project
+------------------------------------------------
+
+and hack away. The equivalent of `cvs update` is
+
+------------------------------------------------
+$ git pull origin
+------------------------------------------------
+
+which merges in any work that others might have done since the clone
+operation.
+
+[NOTE]
+================================
+The first `git clone` places the following in the
+`my-project/.git/remotes/origin` file, and that's why the previous step
+and the next step both work.
+------------
+URL: foo.com:/pub/project.git/ my-project
+Pull: master:origin
+------------
+================================
+
+You can update the shared repository with your changes using:
+
+------------------------------------------------
+$ git push origin master
+------------------------------------------------
+
+If someone else has updated the repository more recently, `git push`, like
+`cvs commit`, will complain, in which case you must pull any changes
+before attempting the push again.
+
+In the `git push` command above we specify the name of the remote branch
+to update (`master`). If we leave that out, `git push` tries to update
+any branches in the remote repository that have the same name as a branch
+in the local repository. So the last `push` can be done with either of:
+
+------------
+$ git push origin
+$ git push repo.shared.xz:/pub/scm/project.git/
+------------
+
+as long as the shared repository does not have any branches
+other than `master`.
+
+[NOTE]
+============
+Because of this behavior, if the shared repository and the developer's
+repository both have branches named `origin`, then a push like the above
+attempts to update the `origin` branch in the shared repository from the
+developer's `origin` branch. The results may be unexpected, so it's
+usually best to remove any branch named `origin` from the shared
+repository.
+============
+
+Advanced Shared Repository Management
+-------------------------------------
+
+Git allows you to specify scripts called "hooks" to be run at certain
+points. You can use these, for example, to send all commits to the shared
+repository to a mailing list. See link:hooks.html[Hooks used by git].
+
+You can enforce finer grained permissions using update hooks. See
+link:howto/update-hook-example.txt[Controlling access to branches using
+update hooks].
+
+CVS annotate
+------------
+
+So, something has gone wrong, and you don't know whom to blame, and
+you're an ex-CVS user and used to do "cvs annotate" to see who caused
+the breakage. You're looking for the "git annotate", and it's just
+claiming not to find such a script. You're annoyed.
+
+Yes, that's right. Core git doesn't do "annotate", although it's
+technically possible, and there are at least two specialized scripts out
+there that can be used to get equivalent information (see the git
+mailing list archives for details).
+
+git has a couple of alternatives, though, that you may find sufficient
+or even superior depending on your use. One is called "git-whatchanged"
+(for obvious reasons) and the other one is called "pickaxe" ("a tool for
+the software archaeologist").
+
+The "git-whatchanged" script is a truly trivial script that can give you
+a good overview of what has changed in a file or a directory (or an
+arbitrary list of files or directories). The "pickaxe" support is an
+additional layer that can be used to further specify exactly what you're
+looking for, if you already know the specific area that changed.
Let's step back a bit and think about the reason why you would
want to do "cvs annotate a-file.c" to begin with.
interested in. You would see many log messages and patches that
do not have anything to do with the piece of code you are
interested in. As an example, assuming that you have this piece
-code that you are interested in in the HEAD version:
+of code that you are interested in in the HEAD version:
if (frotz) {
nitfol();
nitfol();
}'
-We have already talked about the "--stdin" form of git-diff-tree
+We have already talked about the "\--stdin" form of git-diff-tree
command that reads the list of commits and compares each commit
-with its parents. The git-whatchanged command internally runs
+with its parents (otherwise you should go back and read the tutorial).
+The git-whatchanged command internally runs
the equivalent of the above command, and can be used like this:
$ git-whatchanged -p -S'if (frotz) {
Also, in the original context, the same statement might have
appeared at first in a different file and later the file was
renamed to "a-file.c". CVS annotate would not help you to go
-back across such a rename, but GIT would still help you in such
+back across such a rename, but git would still help you in such
a situation. For that, you can give the -C flag to
git-diff-tree, like this:
called "o-file.c" and then renamed in an earlier commit, or if
the file was created by copying an existing "o-file.c" in an
earlier commit, you will not lose track. If the "if" statement
-did not change across such rename or copy, then the commit that
+did not change across such a rename or copy, then the commit that
does rename or copy would not show in the output, and if the
"if" statement was modified while the file was still called
"o-file.c", it would find the commit that changed the statement
when it was in "o-file.c".
-[ BTW, the current versions of "git-diff-tree -C" is not eager
+NOTE: The current version of "git-diff-tree -C" is not eager
enough to find copies, and it will miss the fact that a-file.c
was created by copying o-file.c unless o-file.c was somehow
- changed in the same commit.]
+ changed in the same commit.
You can use the --pickaxe-all flag in addition to the -S flag.
This causes the differences from all the files contained in
nitfol();
}' --pickaxe-all
-[ Side note. This option is called "--pickaxe-all" because -S
+NOTE: This option is called "--pickaxe-all" because -S
option is internally called "pickaxe", a tool for software
- archaeologists.]
+ archaeologists.