or: $dashless [--quiet] foreach [--recursive] <command>
or: $dashless [--quiet] sync [--recursive] [--] [<path>...]"
OPTIONS_SPEC=
+SUBDIRECTORY_OK=Yes
. git-sh-setup
. git-sh-i18n
. git-parse-remote
require_work_tree
+wt_prefix=$(git rev-parse --show-prefix)
+cd_to_toplevel
command=
branch=
update=
prefix=
custom_name=
+depth=
# The function takes at most 2 arguments. The first argument is the
# URL that navigates to the submodule origin repo. When relative, this URL
echo "${is_relative:+${up_path}}${remoteurl#./}"
}
+# Resolve a path to be relative to another path. This is intended for
+# converting submodule paths when git-submodule is run in a subdirectory
+# and only handles paths where the directory separator is '/'.
+#
+# The output is the first argument as a path relative to the second argument,
+# which defaults to $wt_prefix if it is omitted.
+relative_path ()
+{
+ local target curdir result
+ target=$1
+ curdir=${2-$wt_prefix}
+ curdir=${curdir%/}
+ result=
+
+ while test -n "$curdir"
+ do
+ case "$target" in
+ "$curdir/"*)
+ target=${target#"$curdir"/}
+ break
+ ;;
+ esac
+
+ result="${result}../"
+ if test "$curdir" = "${curdir%/*}"
+ then
+ curdir=
+ else
+ curdir="${curdir%/*}"
+ fi
+ done
+
+ echo "$result$target"
+}
+
#
# Get submodule info for registered submodules
# $@ = path to limit submodule list
#
module_list()
{
+ eval "set $(git rev-parse --sq --prefix "$wt_prefix" -- "$@")"
(
git ls-files -z --error-unmatch --stage -- "$@" ||
echo "unmatched pathspec exists"
name=$2
url=$3
reference="$4"
+ depth="$5"
quiet=
if test -n "$GIT_QUIET"
then
mkdir -p "$gitdir_base"
(
clear_local_git_env
- git clone $quiet -n ${reference:+"$reference"} \
+ git clone $quiet ${depth:+"$depth"} -n ${reference:+"$reference"} \
--separate-git-dir "$gitdir" "$url" "$sm_path"
) ||
die "$(eval_gettext "Clone of '\$url' into submodule path '\$sm_path' failed")"
cmd_add()
{
# parse $args after "submodule ... add".
+ reference_path=
while test $# -ne 0
do
case "$1" in
;;
--reference)
case "$2" in '') usage ;; esac
- reference="--reference=$2"
+ reference_path=$2
shift
;;
--reference=*)
- reference="$1"
+ reference_path="${1#--reference=}"
;;
--name)
case "$2" in '') usage ;; esac
custom_name=$2
shift
;;
+ --depth)
+ case "$2" in '') usage ;; esac
+ depth="--depth=$2"
+ shift
+ ;;
+ --depth=*)
+ depth=$1
+ ;;
--)
shift
break
shift
done
+ if test -n "$reference_path"
+ then
+ is_absolute_path "$reference_path" ||
+ reference_path="$wt_prefix$reference_path"
+
+ reference="--reference=$reference_path"
+ fi
+
repo=$1
sm_path=$2
usage
fi
+ is_absolute_path "$sm_path" || sm_path="$wt_prefix$sm_path"
+
# assure repo is absolute or relative to parent
case "$repo" in
./*|../*)
+ test -z "$wt_prefix" ||
+ die "$(gettext "Relative path can only be used from the toplevel of the working tree")"
+
# dereference source url relative to parent's url
realrepo=$(resolve_relative_url "$repo") || exit
;;
echo "$(eval_gettext "Reactivating local git directory for submodule '\$sm_name'.")"
fi
fi
- module_clone "$sm_path" "$sm_name" "$realrepo" "$reference" || exit
+ module_clone "$sm_path" "$sm_name" "$realrepo" "$reference" "$depth" || exit
(
clear_local_git_env
cd "$sm_path" &&
die_if_unmatched "$mode"
if test -e "$sm_path"/.git
then
- say "$(eval_gettext "Entering '\$prefix\$sm_path'")"
+ displaypath=$(relative_path "$sm_path")
+ say "$(eval_gettext "Entering '\$prefix\$displaypath'")"
name=$(module_name "$sm_path")
(
prefix="$prefix$sm_path/"
clear_local_git_env
- # we make $path available to scripts ...
- path=$sm_path
cd "$sm_path" &&
+ sm_path=$(relative_path "$sm_path") &&
+ # we make $path available to scripts ...
+ path=$sm_path &&
eval "$@" &&
if test -n "$recursive"
then
cmd_foreach "--recursive" "$@"
fi
) <&3 3<&- ||
- die "$(eval_gettext "Stopping at '\$sm_path'; script returned non-zero status.")"
+ die "$(eval_gettext "Stopping at '\$prefix\$displaypath'; script returned non-zero status.")"
fi
done
}
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
+ displaypath=$(relative_path "$sm_path")
+
# Copy url setting when it is not set yet
if test -z "$(git config "submodule.$name.url")"
then
url=$(git config -f .gitmodules submodule."$name".url)
test -z "$url" &&
- die "$(eval_gettext "No url found for submodule path '\$sm_path' in .gitmodules")"
+ die "$(eval_gettext "No url found for submodule path '\$displaypath' in .gitmodules")"
# Possibly a url relative to parent
case "$url" in
;;
esac
git config submodule."$name".url "$url" ||
- die "$(eval_gettext "Failed to register url for submodule path '\$sm_path'")"
+ die "$(eval_gettext "Failed to register url for submodule path '\$displaypath'")"
- say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$sm_path'")"
+ say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$displaypath'")"
fi
# Copy "update" setting when it is not set yet
test -z "$upd" ||
test -n "$(git config submodule."$name".update)" ||
git config submodule."$name".update "$upd" ||
- die "$(eval_gettext "Failed to register update mode for submodule path '\$sm_path'")"
+ die "$(eval_gettext "Failed to register update mode for submodule path '\$displaypath'")"
done
}
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
+ displaypath=$(relative_path "$sm_path")
+
# Remove the submodule work tree (unless the user already did it)
if test -d "$sm_path"
then
# Protect submodules containing a .git directory
if test -d "$sm_path/.git"
then
- echo >&2 "$(eval_gettext "Submodule work tree '\$sm_path' contains a .git directory")"
+ echo >&2 "$(eval_gettext "Submodule work tree '\$displaypath' contains a .git directory")"
die "$(eval_gettext "(use 'rm -rf' if you really want to remove it including all of its history)")"
fi
if test -z "$force"
then
git rm -qn "$sm_path" ||
- die "$(eval_gettext "Submodule work tree '\$sm_path' contains local modifications; use '-f' to discard them")"
+ die "$(eval_gettext "Submodule work tree '\$displaypath' contains local modifications; use '-f' to discard them")"
fi
rm -rf "$sm_path" &&
- say "$(eval_gettext "Cleared directory '\$sm_path'")" ||
- say "$(eval_gettext "Could not remove submodule work tree '\$sm_path'")"
+ say "$(eval_gettext "Cleared directory '\$displaypath'")" ||
+ say "$(eval_gettext "Could not remove submodule work tree '\$displaypath'")"
fi
- mkdir "$sm_path" || say "$(eval_gettext "Could not create empty submodule directory '\$sm_path'")"
+ mkdir "$sm_path" || say "$(eval_gettext "Could not create empty submodule directory '\$displaypath'")"
# Remove the .git/config entries (unless the user already did it)
if test -n "$(git config --get-regexp submodule."$name\.")"
# the user later decides to init this submodule again
url=$(git config submodule."$name".url)
git config --remove-section submodule."$name" 2>/dev/null &&
- say "$(eval_gettext "Submodule '\$name' (\$url) unregistered for path '\$sm_path'")"
+ say "$(eval_gettext "Submodule '\$name' (\$url) unregistered for path '\$displaypath'")"
fi
done
}
--checkout)
update="checkout"
;;
+ --depth)
+ case "$2" in '') usage ;; esac
+ depth="--depth=$2"
+ shift
+ ;;
+ --depth=*)
+ depth=$1
+ ;;
--)
shift
break
update_module=$(git config submodule."$name".update)
fi
+ displaypath=$(relative_path "$prefix$sm_path")
+
if test "$update_module" = "none"
then
- echo "Skipping submodule '$prefix$sm_path'"
+ echo "Skipping submodule '$displaypath'"
continue
fi
# Only mention uninitialized submodules when its
# path have been specified
test "$#" != "0" &&
- say "$(eval_gettext "Submodule path '\$prefix\$sm_path' not initialized
+ say "$(eval_gettext "Submodule path '\$displaypath' not initialized
Maybe you want to use 'update --init'?")"
continue
fi
if ! test -d "$sm_path"/.git -o -f "$sm_path"/.git
then
- module_clone "$sm_path" "$name" "$url" "$reference" || exit
+ module_clone "$sm_path" "$name" "$url" "$reference" "$depth" || exit
cloned_modules="$cloned_modules;$name"
subsha1=
else
subsha1=$(clear_local_git_env; cd "$sm_path" &&
git rev-parse --verify HEAD) ||
- die "$(eval_gettext "Unable to find current revision in submodule path '\$prefix\$sm_path'")"
+ die "$(eval_gettext "Unable to find current revision in submodule path '\$displaypath'")"
fi
if test -n "$remote"
(clear_local_git_env; cd "$sm_path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
- die "$(eval_gettext "Unable to fetch in submodule path '\$prefix\$sm_path'")"
+ die "$(eval_gettext "Unable to fetch in submodule path '\$displaypath'")"
fi
# Is this something we just cloned?
case "$update_module" in
rebase)
command="git rebase"
- die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$prefix\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': rebased into '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': rebased into '\$sha1'")"
must_die_on_failure=yes
;;
merge)
command="git merge"
- die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$prefix\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': merged in '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': merged in '\$sha1'")"
+ must_die_on_failure=yes
+ ;;
+ !*)
+ command="${update_module#!}"
+ die_msg="$(eval_gettext "Execution of '\$command \$sha1' failed in submodule path '\$prefix\$sm_path'")"
+ say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': '\$command \$sha1'")"
must_die_on_failure=yes
;;
*)
command="git checkout $subforce -q"
- die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$prefix\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': checked out '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': checked out '\$sha1'")"
;;
esac
res=$?
if test $res -gt 0
then
- die_msg="$(eval_gettext "Failed to recurse into submodule path '\$prefix\$sm_path'")"
+ die_msg="$(eval_gettext "Failed to recurse into submodule path '\$displaypath'")"
if test $res -eq 1
then
err="${err};$die_msg"
fi
cd_to_toplevel
+ eval "set $(git rev-parse --sq --prefix "$wt_prefix" -- "$@")"
# Get modified modules cared by user
modules=$(git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- "$@" |
sane_egrep '^:([0-7]* )?160000' |
! GIT_DIR="$name/.git" git-rev-parse -q --verify $sha1_dst^0 >/dev/null &&
missing_dst=t
+ display_name=$(relative_path "$name")
+
total_commits=
case "$missing_src,$missing_dst" in
t,)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_src")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commit \$sha1_src")"
;;
,t)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_dst")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commit \$sha1_dst")"
;;
t,t)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commits \$sha1_src and \$sha1_dst")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commits \$sha1_src and \$sha1_dst")"
;;
*)
errmsg=
submodule="$(gettext "submodule")"
if test $mod_dst = 160000
then
- echo "* $name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
+ echo "* $display_name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
else
- echo "* $name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
+ echo "* $display_name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
fi
else
- echo "* $name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
+ echo "* $display_name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
fi
if test -n "$errmsg"
then
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
url=$(git config submodule."$name".url)
- displaypath="$prefix$sm_path"
+ displaypath=$(relative_path "$prefix$sm_path")
if test "$stage" = U
then
say "U$sha1 $displaypath"
say "-$sha1 $displaypath"
continue;
fi
- set_name_rev "$sm_path" "$sha1"
if git diff-files --ignore-submodules=dirty --quiet -- "$sm_path"
then
+ set_name_rev "$sm_path" "$sha1"
say " $sha1 $displaypath$revname"
else
if test -z "$cached"
then
sha1=$(clear_local_git_env; cd "$sm_path" && git rev-parse --verify HEAD)
- set_name_rev "$sm_path" "$sha1"
fi
+ set_name_rev "$sm_path" "$sha1"
say "+$sha1 $displaypath$revname"
fi
if git config "submodule.$name.url" >/dev/null 2>/dev/null
then
- say "$(eval_gettext "Synchronizing submodule url for '\$prefix\$sm_path'")"
+ displaypath=$(relative_path "$prefix$sm_path")
+ say "$(eval_gettext "Synchronizing submodule url for '\$displaypath'")"
git config submodule."$name".url "$super_config_url"
if test -e "$sm_path"/.git