use warnings;
use CGI qw(:standard :escapeHTML -nosticky);
use CGI::Util qw(unescape);
-use CGI::Carp qw(fatalsToBrowser);
+use CGI::Carp qw(fatalsToBrowser set_message);
use Encode;
use Fcntl ':mode';
use File::Find qw();
'double' => 32
);
+# Used to set the maximum load that we will still respond to gitweb queries.
+# If server load exceed this value then return "503 server busy" error.
+# If gitweb cannot determined server load, it is taken to be 0.
+# Leave it undefined (or set to 'undef') to turn off load checking.
+our $maxload = 300;
+
# You define site-wide feature defaults here; override them with
# $GITWEB_CONFIG as necessary.
our %feature = (
'javascript-actions' => {
'override' => 0,
'default' => [0]},
+
+ # Syntax highlighting support. This is based on Daniel Svensson's
+ # and Sham Chukoury's work in gitweb-xmms2.git.
+ # It requires the 'highlight' program present in $PATH,
+ # and therefore is disabled by default.
+
+ # To enable system wide have in $GITWEB_CONFIG
+ # $feature{'highlight'}{'default'} = [1];
+
+ 'highlight' => {
+ 'sub' => sub { feature_bool('highlight', @_) },
+ 'override' => 0,
+ 'default' => [0]},
);
sub gitweb_get_feature {
$feature{$name}{'sub'},
$feature{$name}{'override'},
@{$feature{$name}{'default'}});
- if (!$override) { return @defaults; }
+ # project specific override is possible only if we have project
+ our $git_dir; # global variable, declared later
+ if (!$override || !defined $git_dir) {
+ return @defaults;
+ }
if (!defined $sub) {
warn "feature $name is not overridable";
return @defaults;
}
our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++";
+our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++";
+# die if there are errors parsing config file
if (-e $GITWEB_CONFIG) {
do $GITWEB_CONFIG;
-} else {
- our $GITWEB_CONFIG_SYSTEM = $ENV{'GITWEB_CONFIG_SYSTEM'} || "++GITWEB_CONFIG_SYSTEM++";
- do $GITWEB_CONFIG_SYSTEM if -e $GITWEB_CONFIG_SYSTEM;
+ die $@ if $@;
+} elsif (-e $GITWEB_CONFIG_SYSTEM) {
+ do $GITWEB_CONFIG_SYSTEM;
+ die $@ if $@;
+}
+
+# Get loadavg of system, to compare against $maxload.
+# Currently it requires '/proc/loadavg' present to get loadavg;
+# if it is not present it returns 0, which means no load checking.
+sub get_loadavg {
+ if( -e '/proc/loadavg' ){
+ open my $fd, '<', '/proc/loadavg'
+ or return 0;
+ my @load = split(/\s+/, scalar <$fd>);
+ close $fd;
+
+ # The first three columns measure CPU and IO utilization of the last one,
+ # five, and 10 minute periods. The fourth column shows the number of
+ # currently running processes and the total number of processes in the m/n
+ # format. The last column displays the last process ID used.
+ return $load[0] || 0;
+ }
+ # additional checks for load average should go here for things that don't export
+ # /proc/loadavg
+
+ return 0;
}
# version of the core git binary
$projects_list ||= $projectroot;
+if (defined $maxload && get_loadavg() > $maxload) {
+ die_error(503, "The load average on the server is too high");
+}
+
# ======================================================================
# input validation and dispatch
$git_avatar = '';
}
+# custom error handler: 'die <message>' is Internal Server Error
+sub handle_errors_html {
+ my $msg = shift; # it is already HTML escaped
+
+ # to avoid infinite loop where error occurs in die_error,
+ # change handler to default handler, disabling handle_errors_html
+ set_message("Error occured when inside die_error:\n$msg");
+
+ # you cannot jump out of die_error when called as error handler;
+ # the subroutine set via CGI::Carp::set_message is called _after_
+ # HTTP headers are already written, so it cannot write them itself
+ die_error(undef, undef, $msg, -error_handler => 1, -no_http_header => 1);
+}
+set_message(\&handle_errors_html);
+
# dispatch
if (!defined $action) {
if (defined $hash) {
die_error(400, "Project needed");
}
$actions{$action}->();
-exit;
+DONE_GITWEB:
+1;
## ======================================================================
## action links
+# possible values of extra options
+# -full => 0|1 - use absolute/full URL ($my_uri/$my_url as base)
+# -replay => 1 - start from a current view (replay with modifications)
+# -path_info => 0|1 - don't use/use path_info URL (if possible)
sub href {
my %params = @_;
# default is to use -absolute url() i.e. $my_uri
}
my $use_pathinfo = gitweb_check_feature('pathinfo');
- if ($use_pathinfo and defined $params{'project'}) {
+ if (defined $params{'project'} &&
+ (exists $params{-path_info} ? $params{-path_info} : $use_pathinfo)) {
# try to put as many parameters as possible in PATH_INFO:
# - project name
# - action
# in utf-8 thanks to "binmode STDOUT, ':utf8'" at beginning
sub to_utf8 {
my $str = shift;
+ return undef unless defined $str;
if (utf8::valid($str)) {
utf8::decode($str);
return $str;
# correct, but quoted slashes look too horrible in bookmarks
sub esc_param {
my $str = shift;
+ return undef unless defined $str;
$str =~ s/([^A-Za-z0-9\-_.~()\/:@ ]+)/CGI::escape($1)/eg;
$str =~ s/ /\+/g;
return $str;
# quote unsafe chars in whole URL, so some charactrs cannot be quoted
sub esc_url {
my $str = shift;
+ return undef unless defined $str;
$str =~ s/([^A-Za-z0-9\-_.~();\/;?:@&=])/sprintf("%%%02X", ord($1))/eg;
$str =~ s/\+/%2B/g;
$str =~ s/ /\+/g;
my $str = shift;
my %opts = @_;
+ return undef unless defined $str;
+
$str = to_utf8($str);
$str = $cgi->escapeHTML($str);
if ($opts{'-nbsp'}) {
my $str = shift;
my %opts = @_;
+ return undef unless defined $str;
+
$str = to_utf8($str);
$str = $cgi->escapeHTML($str);
if ($opts{'-nbsp'}) {
$str =~ m/^(.*?)($begre)$/;
my ($lead, $body) = ($1, $2);
if (length($lead) > 4) {
- $body =~ s/^[^;]*;// if ($lead =~ m/&[^;]*$/);
$lead = " ...";
}
return "$lead$body";
$str =~ m/^(.*?)($begre)$/;
my ($mid, $right) = ($1, $2);
if (length($mid) > 5) {
- $left =~ s/&[^;]*$//;
- $right =~ s/^[^;]*;// if ($mid =~ m/&[^;]*$/);
$mid = " ... ";
}
return "$left$mid$right";
my $body = $1;
my $tail = $2;
if (length($tail) > 4) {
- $body =~ s/&[^;]*$//;
$tail = "... ";
}
return "$body$tail";
sub git_get_project_config {
my ($key, $type) = @_;
+ return unless defined $git_dir;
+
# key sanity check
return unless ($key);
$key =~ s/^gitweb\.//;
follow_skip => 2, # ignore duplicates
dangling_symlinks => 0, # ignore dangling symlinks, silently
wanted => sub {
+ # global variables
+ our $project_maxdepth;
+ our $projectroot;
# skip project-list toplevel, if we get it.
return if (m!^[/.]$!);
# only directories can be git repositories
return $type;
}
+# guess file syntax for syntax highlighting; return undef if no highlighting
+# the name of syntax can (in the future) depend on syntax highlighter used
+sub guess_file_syntax {
+ my ($highlight, $mimetype, $file_name) = @_;
+ return undef unless ($highlight && defined $file_name);
+
+ # configuration for 'highlight' (http://www.andre-simon.de/)
+ # match by basename
+ my %highlight_basename = (
+ #'Program' => 'py',
+ #'Library' => 'py',
+ 'SConstruct' => 'py', # SCons equivalent of Makefile
+ 'Makefile' => 'make',
+ );
+ # match by extension
+ my %highlight_ext = (
+ # main extensions, defining name of syntax;
+ # see files in /usr/share/highlight/langDefs/ directory
+ map { $_ => $_ }
+ qw(py c cpp rb java css php sh pl js tex bib xml awk bat ini spec tcl),
+ # alternate extensions, see /etc/highlight/filetypes.conf
+ 'h' => 'c',
+ map { $_ => 'cpp' } qw(cxx c++ cc),
+ map { $_ => 'php' } qw(php3 php4),
+ map { $_ => 'pl' } qw(perl pm), # perhaps also 'cgi'
+ 'mak' => 'make',
+ map { $_ => 'xml' } qw(xhtml html htm),
+ );
+
+ my $basename = basename($file_name, '.in');
+ return $highlight_basename{$basename}
+ if exists $highlight_basename{$basename};
+
+ $basename =~ /\.([^.]*)$/;
+ my $ext = $1 or return undef;
+ return $highlight_ext{$ext}
+ if exists $highlight_ext{$ext};
+
+ return undef;
+}
+
+# run highlighter and return FD of its output,
+# or return original FD if no highlighting
+sub run_highlighter {
+ my ($fd, $highlight, $syntax) = @_;
+ return $fd unless ($highlight && defined $syntax);
+
+ close $fd
+ or die_error(404, "Reading blob failed");
+ open $fd, quote_command(git_cmd(), "cat-file", "blob", $hash)." | ".
+ "highlight --xhtml --fragment --syntax $syntax |"
+ or die_error(500, "Couldn't open file or run syntax highlighter");
+ return $fd;
+}
+
## ======================================================================
## functions printing HTML: header, footer, error page
+sub get_page_title {
+ my $title = to_utf8($site_name);
+
+ return $title unless (defined $project);
+ $title .= " - " . to_utf8($project);
+
+ return $title unless (defined $action);
+ $title .= "/$action"; # $action is US-ASCII (7bit ASCII)
+
+ return $title unless (defined $file_name);
+ $title .= " - " . esc_path($file_name);
+ if ($action eq "tree" && $file_name !~ m|/$|) {
+ $title .= "/";
+ }
+
+ return $title;
+}
+
sub git_header_html {
my $status = shift || "200 OK";
my $expires = shift;
+ my %opts = @_;
- my $title = "$site_name";
- if (defined $project) {
- $title .= " - " . to_utf8($project);
- if (defined $action) {
- $title .= "/$action";
- if (defined $file_name) {
- $title .= " - " . esc_path($file_name);
- if ($action eq "tree" && $file_name !~ m|/$|) {
- $title .= "/";
- }
- }
- }
- }
+ my $title = get_page_title();
my $content_type;
# require explicit support from the UA if we are to send the page as
# 'application/xhtml+xml', otherwise send it as plain old 'text/html'.
$content_type = 'text/html';
}
print $cgi->header(-type=>$content_type, -charset => 'utf-8',
- -status=> $status, -expires => $expires);
+ -status=> $status, -expires => $expires)
+ unless ($opts{'-no_http_header'});
my $mod_perl_version = $ENV{'MOD_PERL'} ? " $ENV{'MOD_PERL'}" : '';
print <<EOF;
<?xml version="1.0" encoding="utf-8"?>
print "</head>\n" .
"<body>\n";
- if (-f $site_header) {
+ if (defined $site_header && -f $site_header) {
insert_file($site_header);
}
print "</div>\n"; # class="page_footer"
}
- if (-f $site_footer) {
+ if (defined $site_footer && -f $site_footer) {
insert_file($site_footer);
}
print qq!<script type="text/javascript" src="$javascript"></script>\n!;
- if ($action eq 'blame_incremental') {
+ if (defined $action &&
+ $action eq 'blame_incremental') {
print qq!<script type="text/javascript">\n!.
qq!startBlame("!. href(action=>"blame_data", -replay=>1) .qq!",\n!.
qq! "!. href() .qq!");\n!.
"</html>";
}
-# die_error(<http_status_code>, <error_message>)
+# die_error(<http_status_code>, <error_message>[, <detailed_html_description>])
# Example: die_error(404, 'Hash not found')
# By convention, use the following status codes (as defined in RFC 2616):
# 400: Invalid or missing CGI parameters, or
# 500: The server isn't configured properly, or
# an internal error occurred (e.g. failed assertions caused by bugs), or
# an unknown error occurred (e.g. the git binary died unexpectedly).
+# 503: The server is currently unavailable (because it is overloaded,
+# or down for maintenance). Generally, this is a temporary state.
sub die_error {
my $status = shift || 500;
- my $error = shift || "Internal server error";
+ my $error = esc_html(shift) || "Internal Server Error";
+ my $extra = shift;
+ my %opts = @_;
- my %http_responses = (400 => '400 Bad Request',
- 403 => '403 Forbidden',
- 404 => '404 Not Found',
- 500 => '500 Internal Server Error');
- git_header_html($http_responses{$status});
+ my %http_responses = (
+ 400 => '400 Bad Request',
+ 403 => '403 Forbidden',
+ 404 => '404 Not Found',
+ 500 => '500 Internal Server Error',
+ 503 => '503 Service Unavailable',
+ );
+ git_header_html($http_responses{$status}, undef, %opts);
print <<EOF;
<div class="page_body">
<br /><br />
$status - $error
<br />
-</div>
EOF
+ if (defined $extra) {
+ print "<hr />\n" .
+ "$extra\n";
+ }
+ print "</div>\n";
+
git_footer_html();
- exit;
+ goto DONE_GITWEB
+ unless ($opts{'-error_handler'});
}
## ----------------------------------------------------------------------
}
sub print_local_time {
+ print format_local_time(@_);
+}
+
+sub format_local_time {
+ my $localtime = '';
my %date = @_;
if ($date{'hour_local'} < 6) {
- printf(" (<span class=\"atnight\">%02d:%02d</span> %s)",
+ $localtime .= sprintf(" (<span class=\"atnight\">%02d:%02d</span> %s)",
$date{'hour_local'}, $date{'minute_local'}, $date{'tz_local'});
} else {
- printf(" (%02d:%02d %s)",
+ $localtime .= sprintf(" (%02d:%02d %s)",
$date{'hour_local'}, $date{'minute_local'}, $date{'tz_local'});
}
+
+ return $localtime;
}
# Outputs the author name and date in long form
# print 'sort by' <th> element, generating 'sort by $name' replay link
# if that order is not selected
sub print_sort_th {
+ print format_sort_th(@_);
+}
+
+sub format_sort_th {
my ($name, $order, $header) = @_;
+ my $sort_th = "";
$header ||= ucfirst($name);
if ($order eq $name) {
- print "<th>$header</th>\n";
+ $sort_th .= "<th>$header</th>\n";
} else {
- print "<th>" .
- $cgi->a({-href => href(-replay=>1, order=>$name),
- -class => "header"}, $header) .
- "</th>\n";
+ $sort_th .= "<th>" .
+ $cgi->a({-href => href(-replay=>1, order=>$name),
+ -class => "header"}, $header) .
+ "</th>\n";
}
+
+ return $sort_th;
}
sub git_project_list_body {
}
git_header_html();
- if (-f $home_text) {
+ if (defined $home_text && -f $home_text) {
print "<div class=\"index_include\">\n";
insert_file($home_text);
print "</div>\n";
open my $fd, "-|", git_cmd(), "cat-file", "blob", $hash
or die_error(500, "Couldn't cat $file_name, $hash");
my $mimetype = blob_mimetype($fd, $file_name);
+ # use 'blob_plain' (aka 'raw') view for files that cannot be displayed
if ($mimetype !~ m!^(?:text/|image/(?:gif|png|jpeg)$)! && -B $fd) {
close $fd;
return git_blob_plain($mimetype);
# we can have blame only for text/* mimetype
$have_blame &&= ($mimetype =~ m!^text/!);
+ my $highlight = gitweb_check_feature('highlight');
+ my $syntax = guess_file_syntax($highlight, $mimetype, $file_name);
+ $fd = run_highlighter($fd, $highlight, $syntax)
+ if $syntax;
+
git_header_html(undef, $expires);
my $formats_nav = '';
if (defined $hash_base && (my %co = parse_commit($hash_base))) {
chomp $line;
$nr++;
$line = untabify($line);
- printf "<div class=\"pre\"><a id=\"l%i\" href=\"" . href(-replay => 1)
- . "#l%i\" class=\"linenr\">%4i</a> %s</div>\n",
- $nr, $nr, $nr, esc_html($line, -nbsp=>1);
+ printf qq!<div class="pre"><a id="l%i" href="%s#l%i" class="linenr">%4i</a> %s</div>\n!,
+ $nr, href(-replay => 1), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1);
}
}
close $fd
}
push @commit_spec, '--root', $hash;
}
- open $fd, "-|", git_cmd(), "format-patch", '--encoding=utf8',
- '--stdout', @commit_spec
+ open $fd, "-|", git_cmd(), "format-patch", @diff_opts,
+ '--encoding=utf8', '--stdout', @commit_spec
or die_error(500, "Open git-format-patch failed");
} else {
die_error(400, "Unknown commitdiff format");