use Term::ReadLine;
use Getopt::Long;
use Data::Dumper;
+use Term::ANSIColor;
use Git;
+$SIG{INT} = sub { print color("reset"), "\n"; exit };
+
package FakeTerm;
sub new {
my ($class, $reason) = @_;
--cc Specify an initial "Cc:" list for the entire series
of emails.
+ --cc-cmd Specify a command to execute per file which adds
+ per file specific cc address entries
+
--bcc Specify a list of email addresses that should be Bcc:
on all the emails.
- --compose Use \$EDITOR to edit an introductory message for the
- patch series.
+ --compose Use \$GIT_EDITOR, core.editor, \$EDITOR, or \$VISUAL to edit
+ an introductory message for the patch series.
--subject Specify the initial "Subject:" line.
Only necessary if --compose is also set. If --compose
--signed-off-cc Automatically add email addresses that appear in
Signed-off-by: or Cc: lines to the cc: list. Defaults to on.
+ --identity The configuration identity, a subsection to prioritise over
+ the default section.
+
--smtp-server If set, specifies the outgoing SMTP server to use.
Defaults to localhost.
+ --smtp-user The username for SMTP-AUTH.
+
+ --smtp-pass The password for SMTP-AUTH.
+
+ --smtp-ssl If set, connects to the SMTP server using SSL.
+
--suppress-from Suppress sending emails to yourself if your address
appears in a From: line. Defaults to off.
# Variables we fill in automatically, or via prompting:
my (@to,@cc,@initial_cc,@bcclist,@xh,
- $initial_reply_to,$initial_subject,@files,$from,$compose,$time);
+ $initial_reply_to,$initial_subject,@files,$author,$sender,$compose,$time);
-my $smtp_server;
my $envelope_sender;
# Example reply to:
my ($quiet, $dry_run) = (0, 0);
# Variables with corresponding config settings
-my ($thread, $chain_reply_to, $suppress_from, $signed_off_cc);
+my ($thread, $chain_reply_to, $suppress_from, $signed_off_cc, $cc_cmd);
+my ($smtp_server, $smtp_authuser, $smtp_authpass, $smtp_ssl);
+my ($identity, $aliasfiletype, @alias_files);
-my %config_settings = (
+my %config_bool_settings = (
"thread" => [\$thread, 1],
"chainreplyto" => [\$chain_reply_to, 1],
"suppressfrom" => [\$suppress_from, 0],
"signedoffcc" => [\$signed_off_cc, 1],
+ "smtpssl" => [\$smtp_ssl, 0],
);
-foreach my $setting (keys %config_settings) {
- my $config = $repo->config_bool("sendemail.$setting");
- ${$config_settings{$setting}->[0]} = (defined $config) ? $config : $config_settings{$setting}->[1];
-}
-
-@bcclist = $repo->config('sendemail.bcc');
-if (!@bcclist or !$bcclist[0]) {
- @bcclist = ();
-}
+my %config_settings = (
+ "smtpserver" => \$smtp_server,
+ "smtpuser" => \$smtp_authuser,
+ "smtppass" => \$smtp_authpass,
+ "cccmd" => \$cc_cmd,
+ "aliasfiletype" => \$aliasfiletype,
+ "bcc" => \@bcclist,
+ "aliasesfile" => \@alias_files,
+);
# Begin by accumulating all the variables (defined above), that we will end up
# needing, first, from the command line:
-my $rc = GetOptions("from=s" => \$from,
+my $rc = GetOptions("sender|from=s" => \$sender,
"in-reply-to=s" => \$initial_reply_to,
"subject=s" => \$initial_subject,
"to=s" => \@to,
"bcc=s" => \@bcclist,
"chain-reply-to!" => \$chain_reply_to,
"smtp-server=s" => \$smtp_server,
+ "smtp-user=s" => \$smtp_authuser,
+ "smtp-pass=s" => \$smtp_authpass,
+ "smtp-ssl!" => \$smtp_ssl,
+ "identity=s" => \$identity,
"compose" => \$compose,
"quiet" => \$quiet,
+ "cc-cmd=s" => \$cc_cmd,
"suppress-from!" => \$suppress_from,
"signed-off-cc|signed-off-by-cc!" => \$signed_off_cc,
"dry-run" => \$dry_run,
usage();
}
+# Now, let's fill any that aren't set in with defaults:
+
+sub read_config {
+ my ($prefix) = @_;
+
+ foreach my $setting (keys %config_bool_settings) {
+ my $target = $config_bool_settings{$setting}->[0];
+ $$target = $repo->config_bool("$prefix.$setting") unless (defined $$target);
+ }
+
+ foreach my $setting (keys %config_settings) {
+ my $target = $config_settings{$setting};
+ if (ref($target) eq "ARRAY") {
+ unless (@$target) {
+ my @values = $repo->config("$prefix.$setting");
+ @$target = @values if (@values && defined $values[0]);
+ }
+ }
+ else {
+ $$target = $repo->config("$prefix.$setting") unless (defined $$target);
+ }
+ }
+}
+
+# read configuration from [sendemail "$identity"], fall back on [sendemail]
+$identity = $repo->config("sendemail.identity") unless (defined $identity);
+read_config("sendemail.$identity") if (defined $identity);
+read_config("sendemail");
+
+# fall back on builtin bool defaults
+foreach my $setting (values %config_bool_settings) {
+ ${$setting->[0]} = $setting->[1] unless (defined (${$setting->[0]}));
+}
+
+my ($repoauthor) = $repo->ident_person('author');
+my ($repocommitter) = $repo->ident_person('committer');
+
# Verify the user input
foreach my $entry (@to) {
die "Comma in --bcclist entry: $entry'\n" unless $entry !~ m/,/;
}
-# Now, let's fill any that aren't set in with defaults:
-
-my ($author) = $repo->ident_person('author');
-my ($committer) = $repo->ident_person('committer');
-
my %aliases;
-my @alias_files = $repo->config('sendemail.aliasesfile');
-my $aliasfiletype = $repo->config('sendemail.aliasfiletype');
my %parse_alias = (
# multiline formats can be supported in the future
mutt => sub { my $fh = shift; while (<$fh>) {
$aliases{$1} = [ split(/\s+/, $2) ];
}}},
pine => sub { my $fh = shift; while (<$fh>) {
- if (/^(\S+)\s+(.*)$/) {
+ if (/^(\S+)\t.*\t(.*)$/) {
$aliases{$1} = [ split(/\s*,\s*/, $2) ];
}}},
gnus => sub { my $fh = shift; while (<$fh>) {
}
}
-($from) = expand_aliases($from) if defined $from;
+($sender) = expand_aliases($sender) if defined $sender;
my $prompting = 0;
-if (!defined $from) {
- $from = $author || $committer;
+if (!defined $sender) {
+ $sender = $repoauthor || $repocommitter;
do {
- $_ = $term->readline("Who should the emails appear to be from? [$from] ");
+ $_ = $term->readline("Who should the emails appear to be from? [$sender] ");
} while (!defined $_);
- $from = $_ if ($_);
- print "Emails will be sent from: ", $from, "\n";
+ $sender = $_ if ($_);
+ print "Emails will be sent from: ", $sender, "\n";
$prompting++;
}
}
@to = expand_aliases(@to);
-@to = (map { sanitize_address_rfc822($_) } @to);
+@to = (map { sanitize_address($_) } @to);
@initial_cc = expand_aliases(@initial_cc);
@bcclist = expand_aliases(@bcclist);
} while (!defined $_);
$initial_reply_to = $_;
- $initial_reply_to =~ s/(^\s+|\s+$)//g;
+ $initial_reply_to =~ s/^\s+<?/</;
+ $initial_reply_to =~ s/>?\s+$/>/;
}
-if (!$smtp_server) {
- $smtp_server = $repo->config('sendemail.smtpserver');
-}
-if (!$smtp_server) {
+if (!defined $smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
$smtp_server = $_;
# effort to have it be unique
open(C,">",$compose_filename)
or die "Failed to open for writing $compose_filename: $!";
- print C "From $from # This line is ignored.\n";
+ print C "From $sender # This line is ignored.\n";
printf C "Subject: %s\n\n", $initial_subject;
printf C <<EOT;
GIT: Please enter your email below.
EOT
close(C);
- my $editor = $ENV{EDITOR};
- $editor = 'vi' unless defined $editor;
+ my $editor = $ENV{GIT_EDITOR} || $repo->config("core.editor") || $ENV{VISUAL} || $ENV{EDITOR} || "vi";
system($editor, $compose_filename);
open(C2,">",$compose_filename . ".final")
# check for a local address:
return $address if ($address =~ /^($local_part_regexp)$/);
+ $address =~ s/^\s*<(.*)>\s*$/$1/;
if ($have_email_valid) {
return scalar Email::Valid->address($address);
} else {
my $date = time;
my $pseudo_rand = int (rand(4200));
my $du_part;
- for ($from, $committer, $author) {
- $du_part = extract_valid_address($_);
- last if ($du_part ne '');
+ for ($sender, $repocommitter, $repoauthor) {
+ $du_part = extract_valid_address(sanitize_address($_));
+ last if (defined $du_part and $du_part ne '');
}
- if ($du_part eq '') {
+ if (not defined $du_part or $du_part eq '') {
use Sys::Hostname qw();
$du_part = 'user@' . Sys::Hostname::hostname();
}
return "$_";
}
-# If an address contains a . in the name portion, the name must be quoted.
-sub sanitize_address_rfc822
+# use the simplest quoting being able to handle the recipient
+sub sanitize_address
{
my ($recipient) = @_;
- my ($recipient_name) = ($recipient =~ /^(.*?)\s+</);
- if ($recipient_name && $recipient_name =~ /\./ && $recipient_name !~ /^".*"$/) {
- my ($name, $addr) = ($recipient =~ /^(.*?)(\s+<.*)/);
- $recipient = "\"$name\"$addr";
+ my ($recipient_name, $recipient_addr) = ($recipient =~ /^(.*?)\s*(<.*)/);
+
+ if (not $recipient_name) {
+ return "$recipient";
+ }
+
+ # if recipient_name is already quoted, do nothing
+ if ($recipient_name =~ /^(".*"|=\?utf-8\?q\?.*\?=)$/) {
+ return $recipient;
}
- return $recipient;
+
+ # rfc2047 is needed if a non-ascii char is included
+ if ($recipient_name =~ /[^[:ascii:]]/) {
+ $recipient_name =~ s/([^-a-zA-Z0-9!*+\/])/sprintf("=%02X", ord($1))/eg;
+ $recipient_name =~ s/(.*)/=\?utf-8\?q\?$1\?=/;
+ }
+
+ # double quotes are needed if specials or CTLs are included
+ elsif ($recipient_name =~ /[][()<>@,;:\\".\000-\037\177]/) {
+ $recipient_name =~ s/(["\\\r])/\\$1/;
+ $recipient_name = "\"$recipient_name\"";
+ }
+
+ return "$recipient_name $recipient_addr";
+
}
sub send_message
{
my @recipients = unique_email_list(@to);
- @cc = (map { sanitize_address_rfc822($_) } @cc);
+ @cc = (map { sanitize_address($_) } @cc);
my $to = join (",\n\t", @recipients);
@recipients = unique_email_list(@recipients,@cc,@bcclist);
@recipients = (map { extract_valid_address($_) } @recipients);
if ($cc ne '') {
$ccline = "\nCc: $cc";
}
- $from = sanitize_address_rfc822($from);
+ my $sanitized_sender = sanitize_address($sender);
make_message_id();
- my $header = "From: $from
+ my $header = "From: $sanitized_sender
To: $to${ccline}
Subject: $subject
Date: $date
}
my @sendmail_parameters = ('-i', @recipients);
- my $raw_from = $from;
+ my $raw_from = $sanitized_sender;
$raw_from = $envelope_sender if (defined $envelope_sender);
$raw_from = extract_valid_address($raw_from);
unshift (@sendmail_parameters,
print $sm "$header\n$message";
close $sm or die $?;
} else {
- require Net::SMTP;
- $smtp ||= Net::SMTP->new( $smtp_server );
+ if ($smtp_ssl) {
+ require Net::SMTP::SSL;
+ $smtp ||= Net::SMTP::SSL->new( $smtp_server, Port => 465 );
+ }
+ else {
+ require Net::SMTP;
+ $smtp ||= Net::SMTP->new( $smtp_server );
+ }
+ $smtp->auth( $smtp_authuser, $smtp_authpass )
+ or die $smtp->message if (defined $smtp_authuser);
$smtp->mail( $raw_from ) or die $smtp->message;
$smtp->to( @recipients ) or die $smtp->message;
$smtp->data or die $smtp->message;
} else {
print "Sendmail: $smtp_server ".join(' ',@sendmail_parameters)."\n";
}
- print "From: $from\nSubject: $subject\nCc: $cc\nTo: $to\n\n";
+ print "From: $sanitized_sender\nSubject: $subject\nCc: $cc\nTo: $to\n\n";
if ($smtp) {
print "Result: ", $smtp->code, ' ',
($smtp->message =~ /\n([^\n]+\n)$/s), "\n";
foreach my $t (@files) {
open(F,"<",$t) or die "can't open file $t";
- my $author_not_sender = undef;
+ my $author = undef;
@cc = @initial_cc;
@xh = ();
my $input_format = undef;
$subject = $1;
} elsif (/^(Cc|From):\s+(.*)$/) {
- if (unquote_rfc2047($2) eq $from) {
- $from = $2;
+ if (unquote_rfc2047($2) eq $sender) {
next if ($suppress_from);
}
elsif ($1 eq 'From') {
- $author_not_sender = $2;
+ $author = unquote_rfc2047($2);
}
printf("(mbox) Adding cc: %s from line '%s'\n",
$2, $_) unless $quiet;
}
}
close F;
- if (defined $author_not_sender) {
- $author_not_sender = unquote_rfc2047($author_not_sender);
- $message = "From: $author_not_sender\n\n$message";
+
+ if (defined $cc_cmd) {
+ open(F, "$cc_cmd $t |")
+ or die "(cc-cmd) Could not execute '$cc_cmd'";
+ while(<F>) {
+ my $c = $_;
+ $c =~ s/^\s*//g;
+ $c =~ s/\n$//g;
+ push @cc, $c;
+ printf("(cc-cmd) Adding cc: %s from: '%s'\n",
+ $c, $cc_cmd) unless $quiet;
+ }
+ close F
+ or die "(cc-cmd) failed to close pipe to '$cc_cmd'";
}
+ if (defined $author) {
+ $message = "From: $author\n\n$message";
+ }
send_message();