Composing
~~~~~~~~~
---bcc::
+--annotate::
+ Review and edit each patch you're about to send. See the
+ CONFIGURATION section for 'sendemail.multiedit'.
+
+--bcc=<address>::
Specify a "Bcc:" value for each email. Default is the value of
'sendemail.bcc'.
+
The --bcc option must be repeated for each user you want on the bcc list.
---cc::
+--cc=<address>::
Specify a starting "Cc:" value for each email.
Default is the value of 'sendemail.cc'.
+
The --cc option must be repeated for each user you want on the cc list.
---annotate::
- Review each patch you're about to send in an editor. The setting
- 'sendemail.multiedit' defines if this will spawn one editor per patch
- or one for all of them at once.
-
--compose::
Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an
introductory message for the patch series.
+
-When '--compose' is used, git send-email gets less interactive will use the
-values of the headers you set there. If the body of the email (what you type
-after the headers and a blank line) only contains blank (or GIT: prefixed)
-lines, the summary won't be sent, but git-send-email will still use the
-Headers values if you don't removed them.
+When '--compose' is used, git send-email will use the From, Subject, and
+In-Reply-To headers specified in the message. If the body of the message
+(what you type after the headers and a blank line) only contains blank
+(or GIT: prefixed) lines the summary won't be sent, but From, Subject,
+and In-Reply-To headers will be used unless they are removed.
+
-If it wasn't able to see a header in the summary it will ask you about it
-interactively after quitting your editor.
+Missing From or In-Reply-To headers will be prompted for.
++
+See the CONFIGURATION section for 'sendemail.multiedit'.
---from::
- Specify the sender of the emails. This will default to
- the value GIT_COMMITTER_IDENT, as returned by "git var -l".
- The user will still be prompted to confirm this entry.
+--from=<address>::
+ Specify the sender of the emails. If not specified on the command line,
+ the value of the 'sendemail.from' configuration option is used. If
+ neither the command line option nor 'sendemail.from' are set, then the
+ user will be prompted for the value. The default for the prompt will be
+ the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
+ set, as returned by "git var -l".
---in-reply-to::
+--in-reply-to=<identifier>::
Specify the contents of the first In-Reply-To header.
Subsequent emails will refer to the previous email
instead of this if --chain-reply-to is set (the default)
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
---subject::
+--subject=<string>::
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
---to::
+--to=<address>::
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
value of the 'sendemail.to' configuration value; if that is unspecified,
Sending
~~~~~~~
---envelope-sender::
+--envelope-sender=<address>::
Specify the envelope sender used to send the emails.
This is useful if your default address is not the address that is
subscribed to a list. If you use the sendmail binary, you must have
the 'sendemail.envelopesender' configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
---smtp-encryption::
+--smtp-encryption=<encryption>::
Specify the encryption to use, either 'ssl' or 'tls'. Any other
value reverts to plain SMTP. Default is the value of
'sendemail.smtpencryption'.
---smtp-pass::
+--smtp-pass[=<password>]::
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
the password. Default is the value of 'sendemail.smtppass',
specified (with '--smtp-pass' or 'sendemail.smtppass'), then the
user is prompted for a password while the input is masked for privacy.
---smtp-server::
+--smtp-server=<host>::
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
---smtp-server-port::
+--smtp-server-port=<port>::
Specifies a port different from the default port (SMTP
servers typically listen to smtp port 25 and ssmtp port
- 465). This can be set with 'sendemail.smtpserverport'.
+ 465); symbolic port names (e.g. "submission" instead of 465)
+ are also accepted. The port can also be set with the
+ 'sendemail.smtpserverport' configuration variable.
--smtp-ssl::
Legacy alias for '--smtp-encryption ssl'.
---smtp-user::
+--smtp-user=<user>::
Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
then authentication is not attempted.
Automating
~~~~~~~~~~
---cc-cmd::
+--cc-cmd=<command>::
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
Default is the value of 'sendemail.cccmd' configuration value.
---[no-]chain-reply-to::
+--[no-]chain-reply-to=<identifier>::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
entire patch series. Default is the value of the 'sendemail.chainreplyto'
configuration value; if that is unspecified, default to --chain-reply-to.
---identity::
+--identity=<identity>::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
cc list. Default is the value of 'sendemail.signedoffbycc' configuration
value; if that is unspecified, default to --signed-off-by-cc.
---suppress-cc::
+--suppress-cc=<category>::
Specify an additional category of recipients to suppress the
- auto-cc of. 'self' will avoid including the sender, 'author' will
- avoid including the patch author, 'cc' will avoid including anyone
- mentioned in Cc lines in the patch, 'sob' will avoid including
- anyone mentioned in Signed-off-by lines, and 'cccmd' will avoid
- running the --cc-cmd. 'all' will suppress all auto cc values.
- Default is the value of 'sendemail.suppresscc' configuration value;
- if that is unspecified, default to 'self' if --suppress-from is
- specified, as well as 'sob' if --no-signed-off-cc is specified.
+ auto-cc of:
++
+--
+- 'author' will avoid including the patch author
+- 'self' will avoid including the sender
+- 'cc' will avoid including anyone mentioned in Cc lines in the patch header
+ except for self (use 'self' for that).
+- 'ccbody' will avoid including anyone mentioned in Cc lines in the
+ patch body (commit message) except for self (use 'self' for that).
+- 'sob' will avoid including anyone mentioned in Signed-off-by lines except
+ for self (use 'self' for that).
+- 'cccmd' will avoid running the --cc-cmd.
+- 'body' is equivalent to 'sob' + 'ccbody'
+- 'all' will suppress all auto cc values.
+--
++
+Default is the value of 'sendemail.suppresscc' configuration value; if
+that is unspecified, default to 'self' if --suppress-from is
+specified, as well as 'body' if --no-signed-off-cc is specified.
--[no-]suppress-from::
If this is set, do not add the From: address to the cc: list.
Administering
~~~~~~~~~~~~~
+--confirm=<mode>::
+ Confirm just before sending:
++
+--
+- 'always' will always confirm before sending
+- 'never' will never confirm before sending
+- 'cc' will confirm before sending when send-email has automatically
+ added addresses from the patch to the Cc list
+- 'compose' will confirm before sending the first message when using --compose.
+- 'auto' is equivalent to 'cc' + 'compose'
+--
++
+Default is the value of 'sendemail.confirm' configuration value; if that
+is unspecified, default to 'auto' unless any of the suppress options
+have been specified, in which case default to 'compose'.
+
--dry-run::
Do everything except actually send the emails.
+--[no-]format-patch::
+ When an argument may be understood either as a reference or as a file name,
+ choose to understand it as a format-patch argument ('--format-patch')
+ or as a file name ('--no-format-patch'). By default, when such a conflict
+ occurs, git send-email will fail.
+
--quiet::
Make git-send-email less verbose. One line per email should be
all that is output.
Default is the value of 'sendemail.validate'; if this is not set,
default to '--validate'.
---[no-]format-patch::
- When an argument may be understood either as a reference or as a file name,
- choose to understand it as a format-patch argument ('--format-patch')
- or as a file name ('--no-format-patch'). By default, when such a conflict
- occurs, git send-email will fail.
-
CONFIGURATION
-------------
sendemail.aliasfiletype::
Format of the file(s) specified in sendemail.aliasesfile. Must be
- one of 'mutt', 'mailrc', 'pine', or 'gnus'.
+ one of 'mutt', 'mailrc', 'pine', 'elm', or 'gnus'.
sendemail.multiedit::
If true (default), a single editor instance will be spawned to edit
summary when '--compose' is used). If false, files will be edited one
after the other, spawning a new editor each time.
+sendemail.confirm::
+ Sets the default for whether to confirm before sending. Must be
+ one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
+ in the previous section for the meaning of these values.
+
Author
------