#!/bin/sh
#
# Copyright (c) 2012 Avery Pennaraum
+# Copyright (c) 2015 Alexey Shumkin
#
test_description='Basic porcelain support for subtrees
-This test verifies the basic operation of the merge, pull, add
+This test verifies the basic operation of the add, pull, merge
and split subcommands of git subtree.
'
. ../../../t/test-lib.sh
+subtree_test_create_repo()
+{
+ test_create_repo "$1"
+ (
+ cd $1
+ git config log.date relative
+ )
+}
+
create()
{
echo "$1" >"$1"
git add "$1"
}
-
check_equal()
{
test_debug 'echo'
fi
}
-fixnl()
+undo()
{
- t=""
- while read x; do
- t="$t$x "
- done
- echo $t
+ git reset --hard HEAD~
}
-multiline()
+# Make sure no patch changes more than one file.
+# The original set of commits changed only one file each.
+# A multi-file change would imply that we pruned commits
+# too aggressively.
+join_commits()
{
- while read x; do
- set -- $x
- for d in "$@"; do
- echo "$d"
- done
+ commit=
+ all=
+ while read x y; do
+ if [ -z "$x" ]; then
+ continue
+ elif [ "$x" = "commit:" ]; then
+ if [ -n "$commit" ]; then
+ echo "$commit $all"
+ all=
+ fi
+ commit="$y"
+ else
+ all="$all $y"
+ fi
done
+ echo "$commit $all"
}
-undo()
-{
- git reset --hard HEAD~
-}
+test_create_commit() (
+ repo=$1
+ commit=$2
+ cd "$repo"
+ mkdir -p $(dirname "$commit") \
+ || error "Could not create directory for commit"
+ echo "$commit" >"$commit"
+ git add "$commit" || error "Could not add commit"
+ git commit -m "$commit" || error "Could not commit"
+)
last_commit_message()
{
git log --pretty=format:%s -1
}
-test_expect_success 'init subproj' '
- test_create_repo subproj
-'
-
-# To the subproject!
-cd subproj
-
-test_expect_success 'add sub1' '
- create sub1 &&
- git commit -m "sub1" &&
- git branch sub1 &&
- git branch -m master subproj
-'
-
-# Save this hash for testing later.
-
-subdir_hash=$(git rev-parse HEAD)
-
-test_expect_success 'add sub2' '
- create sub2 &&
- git commit -m "sub2" &&
- git branch sub2
-'
-
-test_expect_success 'add sub3' '
- create sub3 &&
- git commit -m "sub3" &&
- git branch sub3
-'
-
-# Back to mainline
-cd ..
-
-test_expect_success 'add main4' '
- create main4 &&
- git commit -m "main4" &&
- git branch -m master mainline &&
- git branch subdir
-'
-
-test_expect_success 'fetch subproj history' '
- git fetch ./subproj sub1 &&
- git branch sub1 FETCH_HEAD
-'
-
-test_expect_success 'no subtree exists in main tree' '
- test_must_fail git subtree merge --prefix=subdir sub1
-'
-
-test_expect_success 'no pull from non-existant subtree' '
- test_must_fail git subtree pull --prefix=subdir ./subproj sub1
-'
-
-test_expect_success 'check if --message works for add' '
- git subtree add --prefix=subdir --message="Added subproject" sub1 &&
- check_equal ''"$(last_commit_message)"'' "Added subproject" &&
- undo
-'
-
-test_expect_success 'check if --message works as -m and --prefix as -P' '
- git subtree add -P subdir -m "Added subproject using git subtree" sub1 &&
- check_equal ''"$(last_commit_message)"'' "Added subproject using git subtree" &&
- undo
-'
-
-test_expect_success 'check if --message works with squash too' '
- git subtree add -P subdir -m "Added subproject with squash" --squash sub1 &&
- check_equal ''"$(last_commit_message)"'' "Added subproject with squash" &&
- undo
-'
-
-test_expect_success 'add subproj to mainline' '
- git subtree add --prefix=subdir/ FETCH_HEAD &&
- check_equal ''"$(last_commit_message)"'' "Add '"'subdir/'"' from commit '"'"'''"$(git rev-parse sub1)"'''"'"'"
-'
-
-# this shouldn't actually do anything, since FETCH_HEAD is already a parent
-test_expect_success 'merge fetched subproj' '
- git merge -m "merge -s -ours" -s ours FETCH_HEAD
-'
-
-test_expect_success 'add main-sub5' '
- create subdir/main-sub5 &&
- git commit -m "main-sub5"
-'
-
-test_expect_success 'add main6' '
- create main6 &&
- git commit -m "main6 boring"
-'
-
-test_expect_success 'add main-sub7' '
- create subdir/main-sub7 &&
- git commit -m "main-sub7"
-'
-
-test_expect_success 'fetch new subproj history' '
- git fetch ./subproj sub2 &&
- git branch sub2 FETCH_HEAD
-'
-
-test_expect_success 'check if --message works for merge' '
- git subtree merge --prefix=subdir -m "Merged changes from subproject" sub2 &&
- check_equal ''"$(last_commit_message)"'' "Merged changes from subproject" &&
- undo
-'
-
-test_expect_success 'check if --message for merge works with squash too' '
- git subtree merge --prefix subdir -m "Merged changes from subproject using squash" --squash sub2 &&
- check_equal ''"$(last_commit_message)"'' "Merged changes from subproject using squash" &&
- undo
-'
+subtree_test_count=0
+next_test() {
+ subtree_test_count=$(($subtree_test_count+1))
+}
-test_expect_success 'merge new subproj history into subdir' '
- git subtree merge --prefix=subdir FETCH_HEAD &&
- git branch pre-split &&
- check_equal ''"$(last_commit_message)"'' "Merge commit '"'"'"$(git rev-parse sub2)"'"'"' into mainline"
-'
+#
+# Tests for 'git subtree add'
+#
-test_expect_success 'Check that prefix argument is required for split' '
- echo "You must provide the --prefix option." > expected &&
- test_must_fail git subtree split > actual 2>&1 &&
- test_debug "printf '"'"'expected: '"'"'" &&
- test_debug "cat expected" &&
- test_debug "printf '"'"'actual: '"'"'" &&
- test_debug "cat actual" &&
- test_cmp expected actual &&
- rm -f expected actual
+next_test
+test_expect_success 'no merge from non-existent subtree' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ test_must_fail git subtree merge --prefix="sub dir" FETCH_HEAD
+ )
+'
+
+next_test
+test_expect_success 'no pull from non-existent subtree' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ test_must_fail git subtree pull --prefix="sub dir" ./"sub proj" master
+ )'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --prefix' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Add '\''sub dir/'\'' from commit '\''$(git rev-parse FETCH_HEAD)'\''"
+ )
+'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --prefix and --message' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" --message="Added subproject" FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Added subproject"
+ )
+'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --prefix as -P and --message as -m' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add -P "sub dir" -m "Added subproject" FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Added subproject"
+ )
+'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --squash and --prefix and --message' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" --message="Added subproject with squash" --squash FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Added subproject with squash"
+ )
'
-test_expect_success 'Check that the <prefix> exists for a split' '
- echo "'"'"'non-existent-directory'"'"'" does not exist\; use "'"'"'git subtree add'"'"'" > expected &&
- test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
- test_debug "printf '"'"'expected: '"'"'" &&
- test_debug "cat expected" &&
- test_debug "printf '"'"'actual: '"'"'" &&
- test_debug "cat actual" &&
- test_cmp expected actual
-# rm -f expected actual
-'
+#
+# Tests for 'git subtree merge'
+#
-test_expect_success 'check if --message works for split+rejoin' '
- spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
- git branch spl1 "$spl1" &&
- check_equal ''"$(last_commit_message)"'' "Split & rejoin" &&
- undo
+next_test
+test_expect_success 'merge new subproj history into sub dir/ with --prefix' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Merge commit '\''$(git rev-parse FETCH_HEAD)'\''"
+ )
+'
+
+next_test
+test_expect_success 'merge new subproj history into sub dir/ with --prefix and --message' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" --message="Merged changes from subproject" FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Merged changes from subproject"
+ )
+'
+
+next_test
+test_expect_success 'merge new subproj history into sub dir/ with --squash and --prefix and --message' '
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ subtree_test_create_repo "$subtree_test_count" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" --message="Merged changes from subproject using squash" --squash FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Merged changes from subproject using squash"
+ )
+'
+
+next_test
+test_expect_success 'merge the added subproj again, should do nothing' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD &&
+ # this shouldn not actually do anything, since FETCH_HEAD
+ # is already a parent
+ result=$(git merge -s ours -m "merge -s -ours" FETCH_HEAD) &&
+ check_equal "${result}" "Already up-to-date."
+ )
+'
+
+next_test
+test_expect_success 'merge new subproj history into subdir/ with a slash appended to the argument of --prefix' '
+ test_create_repo "$test_count" &&
+ test_create_repo "$test_count/subproj" &&
+ test_create_commit "$test_count" main1 &&
+ test_create_commit "$test_count/subproj" sub1 &&
+ (
+ cd "$test_count" &&
+ git fetch ./subproj master &&
+ git subtree add --prefix=subdir/ FETCH_HEAD
+ ) &&
+ test_create_commit "$test_count/subproj" sub2 &&
+ (
+ cd "$test_count" &&
+ git fetch ./subproj master &&
+ git subtree merge --prefix=subdir/ FETCH_HEAD &&
+ check_equal "$(last_commit_message)" "Merge commit '\''$(git rev-parse FETCH_HEAD)'\''"
+ )
'
-test_expect_success 'check split with --branch' '
- spl1=$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin) &&
- undo &&
- git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr1 &&
- check_equal ''"$(git rev-parse splitbr1)"'' "$spl1"
-'
+#
+# Tests for 'git subtree split'
+#
+next_test
+test_expect_success 'split requires option --prefix' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD &&
+ echo "You must provide the --prefix option." > expected &&
+ test_must_fail git subtree split > actual 2>&1 &&
+ test_debug "printf '"expected: "'" &&
+ test_debug "cat expected" &&
+ test_debug "printf '"actual: "'" &&
+ test_debug "cat actual" &&
+ test_cmp expected actual
+ )
+'
+
+next_test
+test_expect_success 'split requires path given by option --prefix must exist' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD &&
+ echo "'\''non-existent-directory'\'' does not exist; use '\''git subtree add'\''" > expected &&
+ test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
+ test_debug "printf '"expected: "'" &&
+ test_debug "cat expected" &&
+ test_debug "printf '"actual: "'" &&
+ test_debug "cat actual" &&
+ test_cmp expected actual
+ )
+'
+
+next_test
+test_expect_success 'split sub dir/ with --rejoin' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+ git subtree split --prefix="sub dir" --annotate="*" --rejoin &&
+ check_equal "$(last_commit_message)" "Split '\''sub dir/'\'' into commit '\''$split_hash'\''"
+ )
+ '
+
+next_test
+test_expect_success 'split sub dir/ with --rejoin and --message' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --message="Split & rejoin" --annotate="*" --rejoin &&
+ check_equal "$(last_commit_message)" "Split & rejoin"
+ )
+'
+
+next_test
+test_expect_success 'split "sub dir"/ with --branch' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br &&
+ check_equal "$(git rev-parse subproj-br)" "$split_hash"
+ )
+'
+
+next_test
test_expect_success 'check hash of split' '
- spl1=$(git subtree split --prefix subdir) &&
- undo &&
- git subtree split --prefix subdir --branch splitbr1test &&
- check_equal ''"$(git rev-parse splitbr1test)"'' "$spl1"
- git checkout splitbr1test &&
- new_hash=$(git rev-parse HEAD~2) &&
- git checkout mainline &&
- check_equal ''"$new_hash"'' "$subdir_hash"
-'
-
-test_expect_success 'check split with --branch for an existing branch' '
- spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
- undo &&
- git branch splitbr2 sub1 &&
- git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr2 &&
- check_equal ''"$(git rev-parse splitbr2)"'' "$spl1"
-'
-
-test_expect_success 'check split with --branch for an incompatible branch' '
- test_must_fail git subtree split --prefix subdir --onto FETCH_HEAD --branch subdir
-'
-
-test_expect_success 'check split+rejoin' '
- spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
- undo &&
- git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --rejoin &&
- check_equal ''"$(last_commit_message)"'' "Split '"'"'subdir/'"'"' into commit '"'"'"$spl1"'"'"'"
-'
-
-test_expect_success 'add main-sub8' '
- create subdir/main-sub8 &&
- git commit -m "main-sub8"
-'
-
-# To the subproject!
-cd ./subproj
-
-test_expect_success 'merge split into subproj' '
- git fetch .. spl1 &&
- git branch spl1 FETCH_HEAD &&
- git merge FETCH_HEAD
-'
-
-test_expect_success 'add sub9' '
- create sub9 &&
- git commit -m "sub9"
-'
-
-# Back to mainline
-cd ..
-
-test_expect_success 'split for sub8' '
- split2=''"$(git subtree split --annotate='"'*'"' --prefix subdir/ --rejoin)"''
- git branch split2 "$split2"
-'
-
-test_expect_success 'add main-sub10' '
- create subdir/main-sub10 &&
- git commit -m "main-sub10"
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br &&
+ check_equal "$(git rev-parse subproj-br)" "$split_hash" &&
+ # Check hash of split
+ new_hash=$(git rev-parse subproj-br^2) &&
+ (
+ cd ./"sub proj" &&
+ subdir_hash=$(git rev-parse HEAD) &&
+ check_equal ''"$new_hash"'' "$subdir_hash"
+ )
+ )
+'
+
+next_test
+test_expect_success 'split "sub dir"/ with --branch for an existing branch' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git branch subproj-br FETCH_HEAD &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br &&
+ check_equal "$(git rev-parse subproj-br)" "$split_hash"
+ )
+'
+
+next_test
+test_expect_success 'split "sub dir"/ with --branch for an incompatible branch' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git branch init HEAD &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ test_must_fail git subtree split --prefix="sub dir" --branch init
+ )
'
-test_expect_success 'split for sub10' '
- spl3=''"$(git subtree split --annotate='"'*'"' --prefix subdir --rejoin)"'' &&
- git branch spl3 "$spl3"
-'
-
-# To the subproject!
-cd ./subproj
-
-test_expect_success 'merge split into subproj' '
- git fetch .. spl3 &&
- git branch spl3 FETCH_HEAD &&
- git merge FETCH_HEAD &&
- git branch subproj-merge-spl3
-'
-
-chkm="main4 main6"
-chkms="main-sub10 main-sub5 main-sub7 main-sub8"
-chkms_sub=$(echo $chkms | multiline | sed 's,^,subdir/,' | fixnl)
-chks="sub1 sub2 sub3 sub9"
-chks_sub=$(echo $chks | multiline | sed 's,^,subdir/,' | fixnl)
+#
+# Validity checking
+#
+next_test
test_expect_success 'make sure exactly the right set of files ends up in the subproj' '
- subfiles=''"$(git ls-files | fixnl)"'' &&
- check_equal "$subfiles" "$chkms $chks"
-'
-
-test_expect_success 'make sure the subproj history *only* contains commits that affect the subdir' '
- allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' &&
- check_equal "$allchanges" "$chkms $chks"
-'
-
-# Back to mainline
-cd ..
-
-test_expect_success 'pull from subproj' '
- git fetch ./subproj subproj-merge-spl3 &&
- git branch subproj-merge-spl3 FETCH_HEAD &&
- git subtree pull --prefix=subdir ./subproj subproj-merge-spl3
-'
-
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub3 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD &&
+
+ chks="sub1
+sub2
+sub3
+sub4" &&
+ chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+ chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+ chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+
+ subfiles=$(git ls-files) &&
+ check_equal "$subfiles" "$chkms
+$chks"
+ )
+'
+
+next_test
+test_expect_success 'make sure the subproj *only* contains commits that affect the "sub dir"' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub3 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD &&
+
+ chks="sub1
+sub2
+sub3
+sub4" &&
+ chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+ chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+ chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+ allchanges=$(git log --name-only --pretty=format:"" | sort | sed "/^$/d") &&
+ check_equal "$allchanges" "$chkms
+$chks"
+ )
+'
+
+next_test
test_expect_success 'make sure exactly the right set of files ends up in the mainline' '
- mainfiles=''"$(git ls-files | fixnl)"'' &&
- check_equal "$mainfiles" "$chkm $chkms_sub $chks_sub"
-'
-
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub3 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree pull --prefix="sub dir" ./"sub proj" master &&
+
+ chkm="main1
+main2" &&
+ chks="sub1
+sub2
+sub3
+sub4" &&
+ chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+ chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+ chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+ mainfiles=$(git ls-files) &&
+ check_equal "$mainfiles" "$chkm
+$chkms_sub
+$chks_sub"
+)
+'
+
+next_test
test_expect_success 'make sure each filename changed exactly once in the entire history' '
- # main-sub?? and /subdir/main-sub?? both change, because those are the
- # changes that were split into their own history. And subdir/sub?? never
- # change, since they were *only* changed in the subtree branch.
- allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' &&
- check_equal "$allchanges" ''"$(echo $chkms $chkm $chks $chkms_sub | multiline | sort | fixnl)"''
-'
-
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git config log.date relative
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub3 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree pull --prefix="sub dir" ./"sub proj" master &&
+
+ chkm="main1
+main2" &&
+ chks="sub1
+sub2
+sub3
+sub4" &&
+ chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+ chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+ chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+
+ # main-sub?? and /"sub dir"/main-sub?? both change, because those are the
+ # changes that were split into their own history. And "sub dir"/sub?? never
+ # change, since they were *only* changed in the subtree branch.
+ allchanges=$(git log --name-only --pretty=format:"" | sort | sed "/^$/d") &&
+ expected=''"$(cat <<TXT | sort
+$chkms
+$chkm
+$chks
+$chkms_sub
+TXT
+)"'' &&
+ check_equal "$allchanges" "$expected"
+ )
+'
+
+next_test
test_expect_success 'make sure the --rejoin commits never make it into subproj' '
- check_equal ''"$(git log --pretty=format:'"'%s'"' HEAD^2 | grep -i split)"'' ""
-'
-
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub3 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree pull --prefix="sub dir" ./"sub proj" master &&
+ check_equal "$(git log --pretty=format:"%s" HEAD^2 | grep -i split)" ""
+ )
+'
+
+next_test
test_expect_success 'make sure no "git subtree" tagged commits make it into subproj' '
- # They are meaningless to subproj since one side of the merge refers to the mainline
- check_equal ''"$(git log --pretty=format:'"'%s%n%b'"' HEAD^2 | grep "git-subtree.*:")"'' ""
-'
-
-# prepare second pair of repositories
-mkdir test2
-cd test2
-
-test_expect_success 'init main' '
- test_create_repo main
-'
-
-cd main
-
-test_expect_success 'add main1' '
- create main1 &&
- git commit -m "main1"
-'
-
-cd ..
-
-test_expect_success 'init sub' '
- test_create_repo sub
-'
-
-cd sub
-
-test_expect_success 'add sub2' '
- create sub2 &&
- git commit -m "sub2"
-'
-
-cd ../main
-
-# check if split can find proper base without --onto
-
-test_expect_success 'add sub as subdir in main' '
- git fetch ../sub master &&
- git branch sub2 FETCH_HEAD &&
- git subtree add --prefix subdir sub2
-'
-
-cd ../sub
-
-test_expect_success 'add sub3' '
- create sub3 &&
- git commit -m "sub3"
-'
-
-cd ../main
-
-test_expect_success 'merge from sub' '
- git fetch ../sub master &&
- git branch sub3 FETCH_HEAD &&
- git subtree merge --prefix subdir sub3
-'
-
-test_expect_success 'add main-sub4' '
- create subdir/main-sub4 &&
- git commit -m "main-sub4"
-'
-
-test_expect_success 'split for main-sub4 without --onto' '
- git subtree split --prefix subdir --branch mainsub4
-'
-
-# at this point, the new commit parent should be sub3 if it is not,
-# something went wrong (the "newparent" of "master~" commit should
-# have been sub3, but it was not, because its cache was not set to
-# itself)
-
-test_expect_success 'check that the commit parent is sub3' '
- check_equal ''"$(git log --pretty=format:%P -1 mainsub4)"'' ''"$(git rev-parse sub3)"''
-'
-
-test_expect_success 'add main-sub5' '
- mkdir subdir2 &&
- create subdir2/main-sub5 &&
- git commit -m "main-sub5"
-'
-
-test_expect_success 'split for main-sub5 without --onto' '
- # also test that we still can split out an entirely new subtree
- # if the parent of the first commit in the tree is not empty,
- # then the new subtree has accidentally been attached to something
- git subtree split --prefix subdir2 --branch mainsub5 &&
- check_equal ''"$(git log --pretty=format:%P -1 mainsub5)"'' ""
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub3 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+ ) &&
+ (
+ cd "$subtree_test_count/sub proj" &&
+ git fetch .. subproj-br &&
+ git merge FETCH_HEAD
+ ) &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree pull --prefix="sub dir" ./"sub proj" master &&
+
+ # They are meaningless to subproj since one side of the merge refers to the mainline
+ check_equal "$(git log --pretty=format:"%s%n%b" HEAD^2 | grep "git-subtree.*:")" ""
+ )
'
-# make sure no patch changes more than one file. The original set of commits
-# changed only one file each. A multi-file change would imply that we pruned
-# commits too aggressively.
-joincommits()
-{
- commit=
- all=
- while read x y; do
- #echo "{$x}" >&2
- if [ -z "$x" ]; then
- continue
- elif [ "$x" = "commit:" ]; then
- if [ -n "$commit" ]; then
- echo "$commit $all"
- all=
- fi
- commit="$y"
- else
- all="$all $y"
- fi
- done
- echo "$commit $all"
-}
+#
+# A new set of tests
+#
+next_test
+test_expect_success 'make sure "git subtree split" find the correct parent' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git branch subproj-ref FETCH_HEAD &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --branch subproj-br &&
+
+ # at this point, the new commit parent should be subproj-ref, if it is
+ # not, something went wrong (the "newparent" of "master~" commit should
+ # have been sub2, but it was not, because its cache was not set to
+ # itself)
+ check_equal "$(git log --pretty=format:%P -1 subproj-br)" "$(git rev-parse subproj-ref)"
+ )
+'
+
+next_test
+test_expect_success 'split a new subtree without --onto option' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --branch subproj-br
+ ) &&
+ mkdir "$subtree_test_count"/"sub dir2" &&
+ test_create_commit "$subtree_test_count" "sub dir2"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+
+ # also test that we still can split out an entirely new subtree
+ # if the parent of the first commit in the tree is not empty,
+ # then the new subtree has accidently been attached to something
+ git subtree split --prefix="sub dir2" --branch subproj2-br &&
+ check_equal "$(git log --pretty=format:%P -1 subproj2-br)" ""
+ )
+'
+
+next_test
test_expect_success 'verify one file change per commit' '
- x= &&
- list=''"$(git log --pretty=format:'"'commit: %H'"' | joincommits)"'' &&
-# test_debug "echo HERE" &&
-# test_debug "echo ''"$list"''" &&
- (git log --pretty=format:'"'commit: %H'"' | joincommits |
- ( while read commit a b; do
- test_debug "echo Verifying commit "''"$commit"''
- test_debug "echo a: "''"$a"''
- test_debug "echo b: "''"$b"''
- check_equal "$b" ""
- x=1
- done
- check_equal "$x" 1
- ))
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git branch sub1 FETCH_HEAD &&
+ git subtree add --prefix="sub dir" sub1
+ ) &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir" --branch subproj-br
+ ) &&
+ mkdir "$subtree_test_count"/"sub dir2" &&
+ test_create_commit "$subtree_test_count" "sub dir2"/main-sub2 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree split --prefix="sub dir2" --branch subproj2-br &&
+
+ x= &&
+ git log --pretty=format:"commit: %H" | join_commits |
+ (
+ while read commit a b; do
+ test_debug "echo Verifying commit $commit"
+ test_debug "echo a: $a"
+ test_debug "echo b: $b"
+ check_equal "$b" ""
+ x=1
+ done
+ check_equal "$x" 1
+ )
+ )
+'
+
+next_test
+test_expect_success 'push split to subproj' '
+ subtree_test_create_repo "$subtree_test_count" &&
+ subtree_test_create_repo "$subtree_test_count/sub proj" &&
+ test_create_commit "$subtree_test_count" main1 &&
+ test_create_commit "$subtree_test_count/sub proj" sub1 &&
+ (
+ cd "$subtree_test_count" &&
+ git fetch ./"sub proj" master &&
+ git subtree add --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+ test_create_commit "$subtree_test_count" main2 &&
+ test_create_commit "$subtree_test_count/sub proj" sub2 &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+ (
+ cd $subtree_test_count/"sub proj" &&
+ git branch sub-branch-1 &&
+ cd .. &&
+ git fetch ./"sub proj" master &&
+ git subtree merge --prefix="sub dir" FETCH_HEAD
+ ) &&
+ test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+ (
+ cd "$subtree_test_count" &&
+ git subtree push ./"sub proj" --prefix "sub dir" sub-branch-1 &&
+ cd ./"sub proj" &&
+ git checkout sub-branch-1 &&
+ check_equal "$(last_commit_message)" "sub dir/main-sub3"
+ )
'
test_done