Introduction
------------
-This is trying to be a short tutorial on setting up and using a git
-repository, mainly because being hands-on and using explicit examples is
-often the best way of explaining what is going on.
+This tutorial explains how to use the "core" git programs to set up and
+work with a git repository.
-In normal life, most people wouldn't use the "core" git programs
-directly, but rather script around them to make them more palatable.
-Understanding the core git stuff may help some people get those scripts
-done, though, and it may also be instructive in helping people
-understand what it is that the higher-level helper scripts are actually
-doing.
+If you just need to use git as a revision control system you may prefer
+to start with link:tutorial.html[a tutorial introduction to git] or
+link:user-manual.html[the git user manual].
+
+However, an understanding of these low-level tools can be helpful if
+you want to understand git's internals.
The core git is often called "plumbing", with the prettier user
interfaces on top of it called "porcelain". You may not want to use the
plumbing directly very often, but it can be good to know what the
plumbing does for when the porcelain isn't flushing.
-The material presented here often goes deep describing how things
-work internally. If you are mostly interested in using git as a
-SCM, you can skip them during your first pass.
-
-[NOTE]
-And those "too deep" descriptions are often marked as Note.
-
[NOTE]
-If you are already familiar with another version control system,
-like CVS, you may want to take a look at
-link:everyday.html[Everyday GIT in 20 commands or so] first
-before reading this.
+Deeper technical details are often marked as Notes, which you can
+skip on your first reading.
Creating a git repository
out empty, and the only thing you need to do is find yourself a
subdirectory that you want to use as a working tree - either an empty
one for a totally new project, or an existing working tree that you want
-to import into git.
+to import into git.
For our first example, we're going to start a totally new repository from
scratch, with no pre-existing files, and we'll call it `git-tutorial`.
and see two files:
----------------
-.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
+.git/objects/55/7db03de997c86a4a028e1ebd3a1ceb225be238
.git/objects/f2/4c74a2e500f5ee1332c86b94199f52b1d1d962
----------------
you've only *told* git about them.
However, since git knows about them, you can now start using some of the
-most basic git commands to manipulate the files or look at their status.
+most basic git commands to manipulate the files or look at their status.
In particular, let's not even check in the two files into git yet, we'll
start off by adding another line to `hello` first:
`git-commit-tree` normally takes several arguments -- it wants to know
what the 'parent' of a commit was, but since this is the first commit
ever in this new repository, and it has no parents, we only need to pass in
-the object name of the tree. However, `git-commit-tree`
-also wants to get a commit message
-on its standard input, and it will write out the resulting object name for the
-commit to its standard output.
+the object name of the tree. However, `git-commit-tree` also wants to get a
+commit message on its standard input, and it will write out the resulting
+object name for the commit to its standard output.
And this is where we create the `.git/refs/heads/master` file
which is pointed at by `HEAD`. This file is supposed to contain
Remember how we did the `git-update-index` on file `hello` and then we
changed `hello` afterward, and could compare the new state of `hello` with the
-state we saved in the index file?
+state we saved in the index file?
Further, remember how I said that `git-write-tree` writes the contents
of the *index* file to the tree, and thus what we just committed was in
between a committed *tree* and either the index file or the working
tree. In other words, `git-diff-index` wants a tree to be diffed
against, and before we did the commit, we couldn't do that, because we
-didn't have anything to diff against.
+didn't have anything to diff against.
But now we can do
----------------
(where `-p` has the same meaning as it did in `git-diff-files`), and it
-will show us the same difference, but for a totally different reason.
+will show us the same difference, but for a totally different reason.
Now we're comparing the working tree not against the index file,
but against the tree we just wrote. It just so happens that those two
are obviously the same, so we get the same result.
instead compare against just the index cache contents, and ignore the
current working tree state entirely. Since we just wrote the index
file to HEAD, doing `git-diff-index \--cached -p HEAD` should thus return
-an empty set of differences, and that's exactly what it does.
+an empty set of differences, and that's exactly what it does.
[NOTE]
================
----------------
and you will see exactly what has changed in the repository over its
-short history.
+short history.
[NOTE]
The `\--root` flag is a flag to `git-diff-tree` to tell it to
the working tree that it describes" may not be technically 100%
accurate, but it's a good model for all normal use.
-This has two implications:
+This has two implications:
- if you grow bored with the tutorial repository you created (or you've
made a mistake and want to start all over), you can just do simple
the checked out files or even an index file, and will *only* contain the
actual core git files. Such a repository usually doesn't even have the
`.git` subdirectory, but has all the git files directly in the
-repository.
+repository.
To create your own local live copy of such a "raw" git repository, you'd
first create your own subdirectory for the project, and then copy the
$ rsync -rL rsync://rsync.kernel.org/pub/scm/git/git.git/ .git
----------------
-followed by
+followed by
----------------
$ git-read-tree HEAD
`-a` flag means "check out all files" (if you have a stale copy or an
older version of a checked out tree you may also need to add the `-f`
flag first, to tell git-checkout-index to *force* overwriting of any old
-files).
+files).
Again, this can all be simplified with
which will end up doing all of the above for you.
You have now successfully copied somebody else's (mine) remote
-repository, and checked it out.
+repository, and checked it out.
Creating a new branch
Branches in git are really nothing more than pointers into the git
object database from within the `.git/refs/` subdirectory, and as we
already discussed, the `HEAD` branch is nothing but a symlink to one of
-these object pointers.
+these object pointers.
You can at any time create a new branch by just picking an arbitrary
point in the project history, and just writing the SHA1 name of that
object into a file under `.git/refs/heads/`. You can use any filename you
want (and indeed, subdirectories), but the convention is that the
"normal" branch is called `master`. That's just a convention, though,
-and nothing enforces it.
+and nothing enforces it.
To show that as an example, let's go back to the git-tutorial repository we
used earlier, and create a branch in it. You do that by simply just
------------
will create a new branch based at the current `HEAD` position, and switch
-to it.
+to it.
[NOTE]
================================================
$ git branch <branchname> [startingpoint]
------------
-which will simply _create_ the branch, but will not do anything further.
+which will simply _create_ the branch, but will not do anything further.
You can then later -- once you decide that you want to actually develop
on that branch -- switch to that branch with a regular `git checkout`
with the branchname as the argument.
will show you graphically both of your branches (that's what the `\--all`
means: normally it will just show you your current `HEAD`) and their
histories. You can also see exactly how they came to be from a common
-source.
+source.
Anyway, let's exit `gitk` (`^Q` or the File menu), and decide that we want
to merge the work we did on the `mybranch` branch into the `master`
file, which had no differences in the `mybranch` branch), and say:
----------------
- Auto-merging hello
- CONFLICT (content): Merge conflict in hello
+ Auto-merging hello
+ CONFLICT (content): Merge conflict in hello
Automatic merge failed; fix up by hand
----------------
how can *you* prepare a repository to let other people pull from
it?
-Your do your real work in your working tree that has your
+You do your real work in your working tree that has your
primary repository hanging under it as its `.git` subdirectory.
You *could* make that repository accessible remotely and ask
people to pull from it, but in practice that is not the way
propagation to other publicly visible machines:
------------
-$ git push master.kernel.org:/pub/scm/git/git.git/
+$ git push master.kernel.org:/pub/scm/git/git.git/
------------
and the reason why you preferred changes made in one side over
the other. Otherwise it would make the project history harder
to follow, not easier.
-
-[ to be continued.. cvsimports ]