SYNOPSIS
--------
[verse]
-'git-reset' [--mixed | --soft | --hard] [<commit>]
-'git-reset' [--mixed] <commit> [--] <paths>...
+'git reset' [--mixed | --soft | --hard | --merge] [-q] [<commit>]
+'git reset' [-q] [<commit>] [--] <paths>...
+'git reset' --patch [<commit>] [--] [<paths>...]
DESCRIPTION
-----------
the undo in the history.
If you want to undo a commit other than the latest on a branch,
-gitlink:git-revert[1] is your friend.
+linkgit:git-revert[1] is your friend.
-The second form with 'paths' is used to revert selected paths in
-the index from a given commit, without moving HEAD.
+The second and third forms with 'paths' and/or --patch are used to
+revert selected paths in the index from a given commit, without moving
+HEAD.
OPTIONS
--soft::
Does not touch the index file nor the working tree at all, but
requires them to be in a good order. This leaves all your changed
- files "Added but not yet committed", as gitlink:git-status[1] would
+ files "Changes to be committed", as 'git-status' would
put it.
--hard::
switched to. Any changes to tracked files in the working tree
since <commit> are lost.
+--merge::
+ Resets the index to match the tree recorded by the named commit,
+ and updates the files that are different between the named commit
+ and the current commit in the working tree.
+
+-p::
+--patch::
+ Interactively select hunks in the difference between the index
+ and <commit> (defaults to HEAD). The chosen hunks are applied
+ in reverse to the index.
++
+This means that `git reset -p` is the opposite of `git add -p` (see
+linkgit:git-add[1]).
+
+-q::
+--quiet::
+ Be quiet, only report errors.
+
<commit>::
- Commit to make the current HEAD.
+ Commit to make the current HEAD. If not given defaults to HEAD.
+
+DISCUSSION
+----------
+
+The tables below show what happens when running:
+
+----------
+git reset --option target
+----------
+
+to reset the HEAD to another commit (`target`) with the different
+reset options depending on the state of the files.
+
+In these tables, A, B, C and D are some different states of a
+file. For example, the first line of the first table means that if a
+file is in state A in the working tree, in state B in the index, in
+state C in HEAD and in state D in the target, then "git reset --soft
+target" will put the file in state A in the working tree, in state B
+in the index and in state D in HEAD.
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ A B C D --soft A B D
+ --mixed A D D
+ --hard D D D
+ --merge (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ A B C C --soft A B C
+ --mixed A C C
+ --hard C C C
+ --merge (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B B C D --soft B B D
+ --mixed B D D
+ --hard D D D
+ --merge D D D
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B B C C --soft B B C
+ --mixed B C C
+ --hard C C C
+ --merge C C C
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B C C D --soft B C D
+ --mixed B D D
+ --hard D D D
+ --merge (disallowed)
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ B C C C --soft B C C
+ --mixed B C C
+ --hard C C C
+ --merge B C C
+
+"reset --merge" is meant to be used when resetting out of a conflicted
+merge. Any mergy operation guarantees that the work tree file that is
+involved in the merge does not have local change wrt the index before
+it starts, and that it writes the result out to the work tree. So if
+we see some difference between the index and the target and also
+between the index and the work tree, then it means that we are not
+resetting out from a state that a mergy operation left after failing
+with a conflict. That is why we disallow --merge option in this case.
+
+The following tables show what happens when there are unmerged
+entries:
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ X U A B --soft (disallowed)
+ --mixed X B B
+ --hard B B B
+ --merge B B B
+
+ working index HEAD target working index HEAD
+ ----------------------------------------------------
+ X U A A --soft (disallowed)
+ --mixed X A A
+ --hard A A A
+ --merge A A A
+
+X means any state and U means an unmerged index.
Examples
--------
<1> This is most often done when you remembered what you
just committed is incomplete, or you misspelled your commit
message, or both. Leaves working tree as it was before "reset".
-<2> make corrections to working tree files.
+<2> Make corrections to working tree files.
<3> "reset" copies the old head to .git/ORIG_HEAD; redo the
commit by starting with its log message. If you do not need to
edit the message further, you can give -C option instead.
+
-See also the --amend option to gitlink:git-commit[1].
+See also the --amend option to linkgit:git-commit[1].
Undo commits permanently::
+
+
<1> The last three commits (HEAD, HEAD^, and HEAD~2) were bad
and you do not want to ever see them again. Do *not* do this if
-you have already given these commits to somebody else.
+you have already given these commits to somebody else. (See the
+"RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] for
+the implications of doing so.)
Undo a commit, making it a topic branch::
+
$ git pull git://info.example.com/ nitfol <4>
------------
+
-<1> you are happily working on something, and find the changes
+<1> You are happily working on something, and find the changes
in these files are in good order. You do not want to see them
when you run "git diff", because you plan to work on other files
and changes with these files are distracting.
-<2> somebody asks you to pull, and the changes sounds worthy of merging.
-<3> however, you already dirtied the index (i.e. your index does
+<2> Somebody asks you to pull, and the changes sounds worthy of merging.
+<3> However, you already dirtied the index (i.e. your index does
not match the HEAD commit). But you know the pull you are going
to make does not affect frotz.c nor filfre.c, so you revert the
index changes for these two files. Your changes in working tree
remain there.
-<4> then you can pull and merge, leaving frotz.c and filfre.c
+<4> Then you can pull and merge, leaving frotz.c and filfre.c
changes still in the working tree.
Undo a merge or pull::
$ git pull <1>
Auto-merging nitfol
CONFLICT (content): Merge conflict in nitfol
-Automatic merge failed/prevented; fix up by hand
+Automatic merge failed; fix conflicts and then commit the result.
$ git reset --hard <2>
$ git pull . topic/branch <3>
Updating from 41223... to 13134...
-Fast forward
+Fast-forward
$ git reset --hard ORIG_HEAD <4>
------------
+
-<1> try to update from the upstream resulted in a lot of
+<1> Try to update from the upstream resulted in a lot of
conflicts; you were not ready to spend a lot of time merging
right now, so you decide to do that later.
<2> "pull" has not made merge commit, so "git reset --hard"
which is a synonym for "git reset --hard HEAD" clears the mess
from the index file and the working tree.
-<3> merge a topic branch into the current branch, which resulted
-in a fast forward.
-<4> but you decided that the topic branch is not ready for public
+<3> Merge a topic branch into the current branch, which resulted
+in a fast-forward.
+<4> But you decided that the topic branch is not ready for public
consumption yet. "pull" or "merge" always leaves the original
tip of the current branch in ORIG_HEAD, so resetting hard to it
brings your index file and the working tree back to that state,
and resets the tip of the branch to that commit.
+Undo a merge or pull inside a dirty work tree::
++
+------------
+$ git pull <1>
+Auto-merging nitfol
+Merge made by recursive.
+ nitfol | 20 +++++----
+ ...
+$ git reset --merge ORIG_HEAD <2>
+------------
++
+<1> Even if you may have local modifications in your
+working tree, you can safely say "git pull" when you know
+that the change in the other branch does not overlap with
+them.
+<2> After inspecting the result of the merge, you may find
+that the change in the other branch is unsatisfactory. Running
+"git reset --hard ORIG_HEAD" will let you go back to where you
+were, but it will discard your local changes, which you do not
+want. "git reset --merge" keeps your local changes.
+
+
Interrupted workflow::
+
Suppose you are interrupted by an urgent fix request while you
------------
$ git checkout feature ;# you were working in "feature" branch and
$ work work work ;# got interrupted
-$ git commit -a -m 'snapshot WIP' <1>
+$ git commit -a -m "snapshot WIP" <1>
$ git checkout master
$ fix fix fix
$ git commit ;# commit with real log
<3> At this point the index file still has all the WIP changes you
committed as 'snapshot WIP'. This updates the index to show your
WIP files as uncommitted.
++
+See also linkgit:git-stash[1].
+
+Reset a single file in the index::
++
+Suppose you have added a file to your index, but later decide you do not
+want to add it to your commit. You can remove the file from the index
+while keeping your changes with git reset.
++
+------------
+$ git reset -- frotz.c <1>
+$ git commit -m "Commit files in index" <2>
+$ git add frotz.c <3>
+------------
++
+<1> This removes the file from the index while keeping it in the working
+ directory.
+<2> This commits all other changes in the index.
+<3> Adds the file to the index again.
Author
------
-Written by Junio C Hamano <junkio@cox.net> and Linus Torvalds <torvalds@osdl.org>
+Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds <torvalds@osdl.org>
Documentation
--------------
GIT
---
-Part of the gitlink:git[7] suite
+Part of the linkgit:git[1] suite