email sent, rather than to the first email sent.
Defaults to on.
- --no-signed-off-cc Suppress the automatic addition of email addresses
- that appear in Signed-off-by: or Cc: lines to the cc:
- list. Note: Using this option is not recommended.
+ --signed-off-cc Automatically add email addresses that appear in
+ Signed-off-by: or Cc: lines to the cc: list. Defaults to on.
--smtp-server If set, specifies the outgoing SMTP server to use.
Defaults to localhost.
--suppress-from Suppress sending emails to yourself if your address
- appears in a From: line.
+ appears in a From: line. Defaults to off.
+
+ --thread Specify that the "In-Reply-To:" header should be set on all
+ emails. Defaults to on.
--quiet Make git-send-email less verbose. One line per email
should be all that is output.
--dry-run Do everything except actually send the emails.
+ --envelope-sender Specify the envelope sender used to send the emails.
+
EOT
exit(1);
}
my (@to,@cc,@initial_cc,@bcclist,@xh,
$initial_reply_to,$initial_subject,@files,$from,$compose,$time);
-# Behavior modification variables
-my ($chain_reply_to, $quiet, $suppress_from, $no_signed_off_cc,
- $dry_run) = (1, 0, 0, 0, 0);
my $smtp_server;
+my $envelope_sender;
# Example reply to:
#$initial_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
$term = new FakeTerm "$@: going non-interactive";
}
-my $def_chain = $repo->config_boolean('sendemail.chainreplyto');
-if ($def_chain and $def_chain eq 'false') {
- $chain_reply_to = 0;
+# Behavior modification variables
+my ($quiet, $dry_run) = (0, 0);
+
+# Variables with corresponding config settings
+my ($thread, $chain_reply_to, $suppress_from, $signed_off_cc);
+
+my %config_settings = (
+ "thread" => [\$thread, 1],
+ "chainreplyto" => [\$chain_reply_to, 1],
+ "suppressfrom" => [\$suppress_from, 0],
+ "signedoffcc" => [\$signed_off_cc, 1],
+);
+
+foreach my $setting (keys %config_settings) {
+ my $config = $repo->config_bool("sendemail.$setting");
+ ${$config_settings{$setting}->[0]} = (defined $config) ? $config : $config_settings{$setting}->[1];
}
@bcclist = $repo->config('sendemail.bcc');
"smtp-server=s" => \$smtp_server,
"compose" => \$compose,
"quiet" => \$quiet,
- "suppress-from" => \$suppress_from,
- "no-signed-off-cc|no-signed-off-by-cc" => \$no_signed_off_cc,
+ "suppress-from!" => \$suppress_from,
+ "signed-off-cc|signed-off-by-cc!" => \$signed_off_cc,
"dry-run" => \$dry_run,
+ "envelope-sender=s" => \$envelope_sender,
+ "thread!" => \$thread,
);
unless ($rc) {
my %parse_alias = (
# multiline formats can be supported in the future
mutt => sub { my $fh = shift; while (<$fh>) {
- if (/^alias\s+(\S+)\s+(.*)$/) {
+ if (/^\s*alias\s+(\S+)\s+(.*)$/) {
my ($alias, $addr) = ($1, $2);
$addr =~ s/#.*$//; # mutt allows # comments
# commas delimit multiple addresses
}
@to = expand_aliases(@to);
+@to = (map { sanitize_address_rfc822($_) } @to);
@initial_cc = expand_aliases(@initial_cc);
@bcclist = expand_aliases(@bcclist);
$prompting++;
}
-if (!defined $initial_reply_to && $prompting) {
+if ($thread && !defined $initial_reply_to && $prompting) {
do {
$_= $term->readline("Message-ID to be used as In-Reply-To for the first email? ",
$initial_reply_to);
# 1 second since the last time we were called.
# We'll setup a template for the message id, using the "from" address:
-my $message_id_from = extract_valid_address($from);
-my $message_id_template = "<%s-git-send-email-$message_id_from>";
sub make_message_id
{
my $date = time;
my $pseudo_rand = int (rand(4200));
+ my $du_part;
+ for ($from, $committer, $author) {
+ $du_part = extract_valid_address($_);
+ last if ($du_part ne '');
+ }
+ if ($du_part eq '') {
+ use Sys::Hostname qw();
+ $du_part = 'user@' . Sys::Hostname::hostname();
+ }
+ my $message_id_template = "<%s-git-send-email-$du_part>";
$message_id = sprintf $message_id_template, "$date$pseudo_rand";
#print "new message id = $message_id\n"; # Was useful for debugging
}
}
my $cc = join(", ", unique_email_list(@cc));
+ my $ccline = "";
+ if ($cc ne '') {
+ $ccline = "\nCc: $cc";
+ }
$from = sanitize_address_rfc822($from);
+ make_message_id();
+
my $header = "From: $from
-To: $to
-Cc: $cc
+To: $to${ccline}
Subject: $subject
Date: $date
Message-Id: $message_id
X-Mailer: git-send-email $gitversion
";
- if ($reply_to) {
+ if ($thread && $reply_to) {
$header .= "In-Reply-To: $reply_to\n";
$header .= "References: $references\n";
}
my @sendmail_parameters = ('-i', @recipients);
+ my $raw_from = $from;
+ $raw_from = $envelope_sender if (defined $envelope_sender);
+ $raw_from = extract_valid_address($raw_from);
+ unshift (@sendmail_parameters,
+ '-f', $raw_from) if(defined $envelope_sender);
if ($dry_run) {
# We don't want to send the email.
} else {
require Net::SMTP;
$smtp ||= Net::SMTP->new( $smtp_server );
- $smtp->mail( $from ) or die $smtp->message;
+ $smtp->mail( $raw_from ) or die $smtp->message;
$smtp->to( @recipients ) or die $smtp->message;
$smtp->data or die $smtp->message;
$smtp->datasend("$header\n$message") or die $smtp->message;
printf (($dry_run ? "Dry-" : "")."Sent %s\n", $subject);
} else {
print (($dry_run ? "Dry-" : "")."OK. Log says:\nDate: $date\n");
- if ($smtp) {
+ if ($smtp_server !~ m#^/#) {
print "Server: $smtp_server\n";
- print "MAIL FROM: $from\n";
- print "RCPT TO: ".join(',',@recipients)."\n";
+ print "MAIL FROM:<$raw_from>\n";
+ print "RCPT TO:".join(',',(map { "<$_>" } @recipients))."\n";
} else {
print "Sendmail: $smtp_server ".join(' ',@sendmail_parameters)."\n";
}
$reply_to = $initial_reply_to;
$references = $initial_reply_to || '';
-make_message_id();
$subject = $initial_subject;
foreach my $t (@files) {
$subject = $1;
} elsif (/^(Cc|From):\s+(.*)$/) {
- if ($2 eq $from) {
+ if (unquote_rfc2047($2) eq $from) {
+ $from = $2;
next if ($suppress_from);
}
elsif ($1 eq 'From') {
}
} else {
$message .= $_;
- if (/^(Signed-off-by|Cc): (.*)$/i && !$no_signed_off_cc) {
+ if (/^(Signed-off-by|Cc): (.*)$/i && $signed_off_cc) {
my $c = $2;
chomp $c;
push @cc, $c;
$references = "$message_id";
}
}
- make_message_id();
}
if ($compose) {