The Git transport starts off by sending the command and repository
on the wire using the pkt-line format, followed by a NUL byte and a
-hostname paramater, terminated by a NUL byte.
+hostname parameter, terminated by a NUL byte.
0032git-upload-pack /project.git\0host=myserver.com\0
"0039git-upload-pack /schacon/gitbook.git\0host=example.com\0" |
nc -v example.com 9418
+If the server refuses the request for some reasons, it could abort
+gracefully with an error message.
+
+----
+ error-line = PKT-LINE("ERR" SP explanation-text)
+----
+
SSH Transport
-------------
Packfile Negotiation
--------------------
-After reference and capabilities discovery, the client can decide
-to terminate the connection by sending a flush-pkt, telling the
-server it can now gracefully terminate (as happens with the ls-remote
-command) or it can enter the negotiation phase, where the client and
-server determine what the minimal packfile necessary for transport is.
-
-Once the client has the initial list of references that the server
-has, as well as the list of capabilities, it will begin telling the
-server what objects it wants and what objects it has, so the server
-can make a packfile that only contains the objects that the client needs.
-The client will also send a list of the capabilities it wants to be in
-effect, out of what the server said it could do with the first 'want' line.
+After reference and capabilities discovery, the client can decide to
+terminate the connection by sending a flush-pkt, telling the server it can
+now gracefully terminate, and disconnect, when it does not need any pack
+data. This can happen with the ls-remote command, and also can happen when
+the client already is up-to-date.
+
+Otherwise, it enters the negotiation phase, where the client and
+server determine what the minimal packfile necessary for transport is,
+by telling the server what objects it wants, its shallow objects
+(if any), and the maximum commit depth it wants (if any). The client
+will also send a list of the capabilities it wants to be in effect,
+out of what the server said it could do with the first 'want' line.
----
upload-request = want-list
- have-list
- compute-end
+ *shallow-line
+ *1depth-request
+ flush-pkt
want-list = first-want
*additional-want
- flush-pkt
+
+ shallow-line = PKT_LINE("shallow" SP obj-id)
+
+ depth-request = PKT_LINE("deepen" SP depth)
first-want = PKT-LINE("want" SP obj-id SP capability-list LF)
additional-want = PKT-LINE("want" SP obj-id LF)
- have-list = *have-line
- have-line = PKT-LINE("have" SP obj-id LF)
- compute-end = flush-pkt / PKT-LINE("done")
+ depth = 1*DIGIT
----
Clients MUST send all the obj-ids it wants from the reference
obj-id in a 'want' command which did not appear in the response
obtained through ref discovery.
-If client is requesting a shallow clone, it will now send a 'deepen'
-line with the depth it is requesting.
+The client MUST write all obj-ids which it only has shallow copies
+of (meaning that it does not have the parents of a commit) as
+'shallow' lines so that the server is aware of the limitations of
+the client's history. Clients MUST NOT mention an obj-id which
+it does not know exists on the server.
+
+The client now sends the maximum commit history depth it wants for
+this transaction, which is the number of commits it wants from the
+tip of the history, if any, as a 'deepen' line. A depth of 0 is the
+same as not making a depth request. The client does not want to receive
+any commits beyond this depth, nor objects needed only to complete
+those commits. Commits whose parents are not received as a result are
+defined as shallow and marked as such in the server. This information
+is sent back to the client in the next step.
+
+Once all the 'want's and 'shallow's (and optional 'deepen') are
+transferred, clients MUST send a flush-pkt, to tell the server side
+that it is done sending the list.
+
+Otherwise, if the client sent a positive depth request, the server
+will determine which commits will and will not be shallow and
+send this information to the client. If the client did not request
+a positive depth, this step is skipped.
-Once all the "want"s (and optional 'deepen') are transferred,
-clients MUST send a flush-pkt. If the client has all the references
-on the server, client flushes and disconnects.
+----
+ shallow-update = *shallow-line
+ *unshallow-line
+ flush-pkt
+
+ shallow-line = PKT-LINE("shallow" SP obj-id)
+
+ unshallow-line = PKT-LINE("unshallow" SP obj-id)
+----
-TODO: shallow/unshallow response and document the deepen command in the ABNF.
+If the client has requested a positive depth, the server will compute
+the set of commits which are no deeper than the desired depth, starting
+at the client's wants. The server writes 'shallow' lines for each
+commit whose parents will not be sent as a result. The server writes
+an 'unshallow' line for each commit which the client has indicated is
+shallow, but is no longer shallow at the currently requested depth
+(that is, its parents will now be sent). The server MUST NOT mark
+as unshallow anything which the client has not indicated was shallow.
Now the client will send a list of the obj-ids it has using 'have'
-lines. In multi_ack mode, the canonical implementation will send up
-to 32 of these at a time, then will send a flush-pkt. The canonical
-implementation will skip ahead and send the next 32 immediately,
-so that there is always a block of 32 "in-flight on the wire" at a
-time.
+lines, so the server can make a packfile that only contains the objects
+that the client needs. In multi_ack mode, the canonical implementation
+will send up to 32 of these at a time, then will send a flush-pkt. The
+canonical implementation will skip ahead and send the next 32 immediately,
+so that there is always a block of 32 "in-flight on the wire" at a time.
+
+----
+ upload-haves = have-list
+ compute-end
+
+ have-list = *have-line
+ have-line = PKT-LINE("have" SP obj-id LF)
+ compute-end = flush-pkt / PKT-LINE("done")
+----
If the server reads 'have' lines, it then will respond by ACKing any
of the obj-ids the client said it had that the server also has. The
A simple clone may look like this (with no 'have' lines):
----
- C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d\0multi_ack \
+ C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d multi_ack \
side-band-64k ofs-delta\n
C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n
C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n
An incremental update (fetch) response might look like this:
----
- C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d\0multi_ack \
+ C: 0054want 74730d410fcb6603ace96f1dc55ea6196122532d multi_ack \
side-band-64k ofs-delta\n
C: 0032want 7d1665144a3a975c05f1f43902ddaf084e784dbe\n
C: 0032want 5a3f6be755bbb7deae50065988cbfa1ffa9ab68a\n
C: 0009done\n
- S: 003aACK 74730d410fcb6603ace96f1dc55ea6196122532d\n
+ S: 0031ACK 74730d410fcb6603ace96f1dc55ea6196122532d\n
S: [PACKFILE]
----
C: 0000
C: [PACKDATA]
- S: 000aunpack ok\n
- S: 0014ok refs/heads/debug\n
- S: 0026ng refs/heads/master non-fast-forward\n
+ S: 000eunpack ok\n
+ S: 0018ok refs/heads/debug\n
+ S: 002ang refs/heads/master non-fast-forward\n
----