DESCRIPTION
-----------
-If <branch> is specified, 'git-rebase' will perform an automatic
+If <branch> is specified, 'git rebase' will perform an automatic
`git checkout <branch>` before doing anything else. Otherwise
it remains on the current branch.
part of topicA. Note that the argument to --onto and the <upstream>
parameter can be any valid commit-ish.
-In case of conflict, 'git-rebase' will stop at the first problematic commit
-and leave conflict markers in the tree. You can use 'git-diff' to locate
+In case of conflict, 'git rebase' will stop at the first problematic commit
+and leave conflict markers in the tree. You can use 'git diff' to locate
the markers (<<<<<<) and make edits to resolve the conflict. For each
file you edit, you need to tell git that the conflict has been resolved,
typically this would be done with
git rebase --continue
-Alternatively, you can undo the 'git-rebase' with
+Alternatively, you can undo the 'git rebase' with
git rebase --abort
+CONFIGURATION
+-------------
+
+rebase.stat::
+ Whether to show a diffstat of what changed upstream since the last
+ rebase. False by default.
+
OPTIONS
-------
<newbase>::
Use merging strategies to rebase. When the recursive (default) merge
strategy is used, this allows rebase to be aware of renames on the
upstream side.
++
+Note that a rebase merge works by replaying each commit from the working
+branch on top of the <upstream> branch. Because of this, when a merge
+conflict happens, the side reported as 'ours' is the so-far rebased
+series, starting with <upstream>, and 'theirs' is the working branch. In
+other words, the sides are swapped.
-s <strategy>::
--strategy=<strategy>::
- Use the given merge strategy; can be supplied more than
- once to specify them in the order they should be tried.
- If there is no `-s` option, a built-in list of strategies
- is used instead ('git-merge-recursive' when merging a single
- head, 'git-merge-octopus' otherwise). This implies --merge.
+ Use the given merge strategy.
+ If there is no `-s` option 'git merge-recursive' is used
+ instead. This implies --merge.
++
+Because 'git rebase' replays each commit from the working branch
+on top of the <upstream> branch using the given strategy, using
+the 'ours' strategy simply discards all patches from the <branch>,
+which makes little sense.
+
+-q::
+--quiet::
+ Be quiet. Implies --no-stat.
-v::
--verbose::
- Display a diffstat of what changed upstream since the last rebase.
+ Be verbose. Implies --stat.
+
+--stat::
+ Show a diffstat of what changed upstream since the last rebase. The
+ diffstat is also controlled by the configuration option rebase.stat.
+
+-n::
+--no-stat::
+ Do not show a diffstat as part of the rebase process.
--no-verify::
This option bypasses the pre-rebase hook. See also linkgit:githooks[5].
context exist they all must match. By default no context is
ever ignored.
+-f::
+--force-rebase::
+ Force the rebase even if the current branch is a descendant
+ of the commit you are rebasing onto. Normally the command will
+ exit with the message "Current branch is up to date" in such a
+ situation.
+
+--ignore-whitespace::
--whitespace=<option>::
- This flag is passed to the 'git-apply' program
+ These flag are passed to the 'git apply' program
(see linkgit:git-apply[1]) that applies the patch.
Incompatible with the --interactive option.
+--committer-date-is-author-date::
+--ignore-date::
+ These flags are passed to 'git am' to easily change the dates
+ of the rebased commits (see linkgit:git-am[1]).
+
-i::
--interactive::
Make a list of the commits which are about to be rebased. Let the
root commits will be rewritten to have <newbase> as parent
instead.
+--autosquash::
+ When the commit log message begins with "squash! ..." (or
+ "fixup! ..."), and there is a commit whose title begins with
+ the same ..., automatically modify the todo list of rebase -i
+ so that the commit marked for squashing comes right after the
+ commit to be modified, and change the action of the moved
+ commit from `pick` to `squash` (or `fixup`).
++
+This option is only valid when '--interactive' option is used.
+
include::merge-strategies.txt[]
NOTES
-----
-You should understand the implications of using 'git-rebase' on a
+You should understand the implications of using 'git rebase' on a
repository that you share. See also RECOVERING FROM UPSTREAM REBASE
below.
...
-------------------------------------------
-The oneline descriptions are purely for your pleasure; 'git-rebase' will
+The oneline descriptions are purely for your pleasure; 'git rebase' will
not look at them but at the commit names ("deadbee" and "fa1afe1" in this
example), so do not delete or edit the names.
By replacing the command "pick" with the command "edit", you can tell
-'git-rebase' to stop after applying that commit, so that you can edit
+'git rebase' to stop after applying that commit, so that you can edit
the files and/or the commit message, amend the commit, and continue
rebasing.
+If you just want to edit the commit message for a commit, replace the
+command "pick" with the command "reword".
+
If you want to fold two or more commits into one, replace the command
-"pick" with "squash" for the second and subsequent commit. If the
-commits had different authors, it will attribute the squashed commit to
-the author of the first commit.
+"pick" for the second and subsequent commits with "squash" or "fixup".
+If the commits had different authors, the folded commit will be
+attributed to the author of the first commit. The suggested commit
+message for the folded commit is the concatenation of the commit
+messages of the first commit and of those with the "squash" command,
+but omits the commit messages of commits with the "fixup" command.
-In both cases, or when a "pick" does not succeed (because of merge
-errors), the loop will stop to let you fix things, and you can continue
-the loop with `git rebase --continue`.
+'git rebase' will stop when "pick" has been replaced with "edit" or
+when a command fails due to merge errors. When you are done editing
+and/or resolving conflicts you can continue with `git rebase --continue`.
For example, if you want to reorder the last 5 commits, such that what
was HEAD~4 becomes the new HEAD. To achieve that, you would call
-'git-rebase' like this:
+'git rebase' like this:
----------------------
$ git rebase -i HEAD~5
-----------------
In interactive mode, you can mark commits with the action "edit". However,
-this does not necessarily mean that 'git-rebase' expects the result of this
+this does not necessarily mean that 'git rebase' expects the result of this
edit to be exactly one commit. Indeed, you can undo the commit, or you can
add other commits. This can be used to split a commit into two:
- Now add the changes to the index that you want to have in the first
commit. You can use `git add` (possibly interactively) or
- 'git-gui' (or both) to do that.
+ 'git gui' (or both) to do that.
- Commit the now-current index with whatever commit message is appropriate
now.
If you are not absolutely sure that the intermediate revisions are
consistent (they compile, pass the testsuite, etc.) you should use
-'git-stash' to stash away the not-yet-committed changes
+'git stash' to stash away the not-yet-committed changes
after each commit, test, and amend the commit if fixes are necessary.
Hard case: The changes are not the same.::
This happens if the 'subsystem' rebase had conflicts, or used
- `\--interactive` to omit, edit, or squash commits; or if the
- upstream used one of `commit \--amend`, `reset`, or
+ `\--interactive` to omit, edit, squash, or fixup commits; or
+ if the upstream used one of `commit \--amend`, `reset`, or
`filter-branch`.
'subsystem' are literally the same before and after the rebase
'subsystem' did.
-In that case, the fix is easy because 'git-rebase' knows to skip
+In that case, the fix is easy because 'git rebase' knows to skip
changes that are already present in the new upstream. So if you say
(assuming you're on 'topic')
------------
example, a commit that was removed via `git rebase
\--interactive` will be **resurrected**!
-The idea is to manually tell 'git-rebase' "where the old 'subsystem'
+The idea is to manually tell 'git rebase' "where the old 'subsystem'
ended and your 'topic' began", that is, what the old merge-base
between them was. You will have to find a way to name the last commit
of the old 'subsystem', for example:
-* With the 'subsystem' reflog: after 'git-fetch', the old tip of
+* With the 'subsystem' reflog: after 'git fetch', the old tip of
'subsystem' is at `subsystem@\{1}`. Subsequent fetches will
increase the number. (See linkgit:git-reflog[1].)