USAGE="[--quiet] add [-b <branch>] [-f|--force] [--name <name>] [--reference <repository>] [--] <repository> [<path>]
or: $dashless [--quiet] status [--cached] [--recursive] [--] [<path>...]
or: $dashless [--quiet] init [--] [<path>...]
- or: $dashless [--quiet] update [--init] [-N|--no-fetch] [-f|--force] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...]
+ or: $dashless [--quiet] deinit [-f|--force] [--] <path>...
+ or: $dashless [--quiet] update [--init] [--remote] [-N|--no-fetch] [-f|--force] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...]
or: $dashless [--quiet] summary [--cached|--files] [--summary-limit <n>] [commit] [--] [<path>...]
or: $dashless [--quiet] foreach [--recursive] <command>
or: $dashless [--quiet] sync [--recursive] [--] [<path>...]"
OPTIONS_SPEC=
+SUBDIRECTORY_OK=Yes
. git-sh-setup
. git-sh-i18n
. git-parse-remote
require_work_tree
+wt_prefix=$(git rev-parse --show-prefix)
+cd_to_toplevel
command=
branch=
recursive=
init=
files=
+remote=
nofetch=
update=
prefix=
echo "${is_relative:+${up_path}}${remoteurl#./}"
}
+# Resolve a path to be relative to another path. This is intended for
+# converting submodule paths when git-submodule is run in a subdirectory
+# and only handles paths where the directory separator is '/'.
+#
+# The output is the first argument as a path relative to the second argument,
+# which defaults to $wt_prefix if it is omitted.
+relative_path ()
+{
+ local target curdir result
+ target=$1
+ curdir=${2-$wt_prefix}
+ curdir=${curdir%/}
+ result=
+
+ while test -n "$curdir"
+ do
+ case "$target" in
+ "$curdir/"*)
+ target=${target#"$curdir"/}
+ break
+ ;;
+ esac
+
+ result="${result}../"
+ if test "$curdir" = "${curdir%/*}"
+ then
+ curdir=
+ else
+ curdir="${curdir%/*}"
+ fi
+ done
+
+ echo "$result$target"
+}
+
#
# Get submodule info for registered submodules
# $@ = path to limit submodule list
#
module_list()
{
+ eval "set $(git rev-parse --sq --prefix "$wt_prefix" -- "$@")"
(
- git ls-files --error-unmatch --stage -- "$@" ||
+ git ls-files -z --error-unmatch --stage -- "$@" ||
echo "unmatched pathspec exists"
) |
perl -e '
my ($null_sha1) = ("0" x 40);
my @out = ();
my $unmatched = 0;
+ $/ = "\0";
while (<STDIN>) {
if (/^unmatched pathspec/) {
$unmatched = 1;
fi
}
+#
+# Print a submodule configuration setting
+#
+# $1 = submodule name
+# $2 = option name
+# $3 = default value
+#
+# Checks in the usual git-config places first (for overrides),
+# otherwise it falls back on .gitmodules. This allows you to
+# distribute project-wide defaults in .gitmodules, while still
+# customizing individual repositories if necessary. If the option is
+# not in .gitmodules either, print a default value.
+#
+get_submodule_config () {
+ name="$1"
+ option="$2"
+ default="$3"
+ value=$(git config submodule."$name"."$option")
+ if test -z "$value"
+ then
+ value=$(git config -f .gitmodules submodule."$name"."$option")
+ fi
+ printf '%s' "${value:-$default}"
+}
+
+
#
# Map submodule path to submodule name
#
(clear_local_git_env; cd "$sm_path" && GIT_WORK_TREE=. git config core.worktree "$rel/$b")
}
+isnumber()
+{
+ n=$(($1 + 0)) 2>/dev/null && test "$n" = "$1"
+}
+
#
# Add a new submodule to the working tree, .gitmodules and the index
#
cmd_add()
{
# parse $args after "submodule ... add".
+ reference_path=
while test $# -ne 0
do
case "$1" in
;;
--reference)
case "$2" in '') usage ;; esac
- reference="--reference=$2"
+ reference_path=$2
shift
;;
--reference=*)
- reference="$1"
+ reference_path="${1#--reference=}"
;;
--name)
case "$2" in '') usage ;; esac
shift
done
+ if test -n "$reference_path"
+ then
+ is_absolute_path "$reference_path" ||
+ reference_path="$wt_prefix$reference_path"
+
+ reference="--reference=$reference_path"
+ fi
+
repo=$1
sm_path=$2
usage
fi
+ is_absolute_path "$sm_path" || sm_path="$wt_prefix$sm_path"
+
# assure repo is absolute or relative to parent
case "$repo" in
./*|../*)
+ test -z "$wt_prefix" ||
+ die "$(gettext "Relative path can only be used from the toplevel of the working tree")"
+
# dereference source url relative to parent's url
realrepo=$(resolve_relative_url "$repo") || exit
;;
git config -f .gitmodules submodule."$sm_name".path "$sm_path" &&
git config -f .gitmodules submodule."$sm_name".url "$repo" &&
+ if test -n "$branch"
+ then
+ git config -f .gitmodules submodule."$sm_name".branch "$branch"
+ fi &&
git add --force .gitmodules ||
die "$(eval_gettext "Failed to register submodule '\$sm_path'")"
}
die_if_unmatched "$mode"
if test -e "$sm_path"/.git
then
- say "$(eval_gettext "Entering '\$prefix\$sm_path'")"
+ displaypath=$(relative_path "$sm_path")
+ say "$(eval_gettext "Entering '\$prefix\$displaypath'")"
name=$(module_name "$sm_path")
(
prefix="$prefix$sm_path/"
clear_local_git_env
- # we make $path available to scripts ...
- path=$sm_path
cd "$sm_path" &&
+ sm_path=$(relative_path "$sm_path") &&
+ # we make $path available to scripts ...
+ path=$sm_path &&
eval "$@" &&
if test -n "$recursive"
then
cmd_foreach "--recursive" "$@"
fi
) <&3 3<&- ||
- die "$(eval_gettext "Stopping at '\$sm_path'; script returned non-zero status.")"
+ die "$(eval_gettext "Stopping at '\$prefix\$displaypath'; script returned non-zero status.")"
fi
done
}
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
+ displaypath=$(relative_path "$sm_path")
+
# Copy url setting when it is not set yet
if test -z "$(git config "submodule.$name.url")"
then
url=$(git config -f .gitmodules submodule."$name".url)
test -z "$url" &&
- die "$(eval_gettext "No url found for submodule path '\$sm_path' in .gitmodules")"
+ die "$(eval_gettext "No url found for submodule path '\$displaypath' in .gitmodules")"
# Possibly a url relative to parent
case "$url" in
;;
esac
git config submodule."$name".url "$url" ||
- die "$(eval_gettext "Failed to register url for submodule path '\$sm_path'")"
+ die "$(eval_gettext "Failed to register url for submodule path '\$displaypath'")"
- say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$sm_path'")"
+ say "$(eval_gettext "Submodule '\$name' (\$url) registered for path '\$displaypath'")"
fi
# Copy "update" setting when it is not set yet
test -z "$upd" ||
test -n "$(git config submodule."$name".update)" ||
git config submodule."$name".update "$upd" ||
- die "$(eval_gettext "Failed to register update mode for submodule path '\$sm_path'")"
+ die "$(eval_gettext "Failed to register update mode for submodule path '\$displaypath'")"
+ done
+}
+
+#
+# Unregister submodules from .git/config and remove their work tree
+#
+# $@ = requested paths (use '.' to deinit all submodules)
+#
+cmd_deinit()
+{
+ # parse $args after "submodule ... deinit".
+ while test $# -ne 0
+ do
+ case "$1" in
+ -f|--force)
+ force=$1
+ ;;
+ -q|--quiet)
+ GIT_QUIET=1
+ ;;
+ --)
+ shift
+ break
+ ;;
+ -*)
+ usage
+ ;;
+ *)
+ break
+ ;;
+ esac
+ shift
+ done
+
+ if test $# = 0
+ then
+ die "$(eval_gettext "Use '.' if you really want to deinitialize all submodules")"
+ fi
+
+ module_list "$@" |
+ while read mode sha1 stage sm_path
+ do
+ die_if_unmatched "$mode"
+ name=$(module_name "$sm_path") || exit
+
+ displaypath=$(relative_path "$sm_path")
+
+ # Remove the submodule work tree (unless the user already did it)
+ if test -d "$sm_path"
+ then
+ # Protect submodules containing a .git directory
+ if test -d "$sm_path/.git"
+ then
+ echo >&2 "$(eval_gettext "Submodule work tree '\$displaypath' contains a .git directory")"
+ die "$(eval_gettext "(use 'rm -rf' if you really want to remove it including all of its history)")"
+ fi
+
+ if test -z "$force"
+ then
+ git rm -qn "$sm_path" ||
+ die "$(eval_gettext "Submodule work tree '\$displaypath' contains local modifications; use '-f' to discard them")"
+ fi
+ rm -rf "$sm_path" &&
+ say "$(eval_gettext "Cleared directory '\$displaypath'")" ||
+ say "$(eval_gettext "Could not remove submodule work tree '\$displaypath'")"
+ fi
+
+ mkdir "$sm_path" || say "$(eval_gettext "Could not create empty submodule directory '\$displaypath'")"
+
+ # Remove the .git/config entries (unless the user already did it)
+ if test -n "$(git config --get-regexp submodule."$name\.")"
+ then
+ # Remove the whole section so we have a clean state when
+ # the user later decides to init this submodule again
+ url=$(git config submodule."$name".url)
+ git config --remove-section submodule."$name" 2>/dev/null &&
+ say "$(eval_gettext "Submodule '\$name' (\$url) unregistered for path '\$displaypath'")"
+ fi
done
}
-i|--init)
init=1
;;
+ --remote)
+ remote=1
+ ;;
-N|--no-fetch)
nofetch=1
;;
die_if_unmatched "$mode"
if test "$stage" = U
then
- echo >&2 "Skipping unmerged submodule $sm_path"
+ echo >&2 "Skipping unmerged submodule $prefix$sm_path"
continue
fi
name=$(module_name "$sm_path") || exit
url=$(git config submodule."$name".url)
+ branch=$(get_submodule_config "$name" branch master)
if ! test -z "$update"
then
update_module=$update
update_module=$(git config submodule."$name".update)
fi
+ displaypath=$(relative_path "$prefix$sm_path")
+
if test "$update_module" = "none"
then
- echo "Skipping submodule '$sm_path'"
+ echo "Skipping submodule '$displaypath'"
continue
fi
# Only mention uninitialized submodules when its
# path have been specified
test "$#" != "0" &&
- say "$(eval_gettext "Submodule path '\$sm_path' not initialized
+ say "$(eval_gettext "Submodule path '\$displaypath' not initialized
Maybe you want to use 'update --init'?")"
continue
fi
else
subsha1=$(clear_local_git_env; cd "$sm_path" &&
git rev-parse --verify HEAD) ||
- die "$(eval_gettext "Unable to find current revision in submodule path '\$sm_path'")"
+ die "$(eval_gettext "Unable to find current revision in submodule path '\$displaypath'")"
+ fi
+
+ if test -n "$remote"
+ then
+ if test -z "$nofetch"
+ then
+ # Fetch remote before determining tracking $sha1
+ (clear_local_git_env; cd "$sm_path" && git-fetch) ||
+ die "$(eval_gettext "Unable to fetch in submodule path '\$sm_path'")"
+ fi
+ remote_name=$(clear_local_git_env; cd "$sm_path" && get_default_remote)
+ sha1=$(clear_local_git_env; cd "$sm_path" &&
+ git rev-parse --verify "${remote_name}/${branch}") ||
+ die "$(eval_gettext "Unable to find current ${remote_name}/${branch} revision in submodule path '\$sm_path'")"
fi
if test "$subsha1" != "$sha1" -o -n "$force"
(clear_local_git_env; cd "$sm_path" &&
( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
- die "$(eval_gettext "Unable to fetch in submodule path '\$sm_path'")"
+ die "$(eval_gettext "Unable to fetch in submodule path '\$displaypath'")"
fi
# Is this something we just cloned?
case "$update_module" in
rebase)
command="git rebase"
- die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$sm_path': rebased into '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to rebase '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': rebased into '\$sha1'")"
must_die_on_failure=yes
;;
merge)
command="git merge"
- die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$sm_path': merged in '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to merge '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': merged in '\$sha1'")"
must_die_on_failure=yes
;;
*)
command="git checkout $subforce -q"
- die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$sm_path'")"
- say_msg="$(eval_gettext "Submodule path '\$sm_path': checked out '\$sha1'")"
+ die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$displaypath'")"
+ say_msg="$(eval_gettext "Submodule path '\$displaypath': checked out '\$sha1'")"
;;
esac
if test -n "$recursive"
then
- (clear_local_git_env; cd "$sm_path" && eval cmd_update "$orig_flags")
+ (
+ prefix="$prefix$sm_path/"
+ clear_local_git_env
+ cd "$sm_path" &&
+ eval cmd_update "$orig_flags"
+ )
res=$?
if test $res -gt 0
then
- die_msg="$(eval_gettext "Failed to recurse into submodule path '\$sm_path'")"
+ die_msg="$(eval_gettext "Failed to recurse into submodule path '\$displaypath'")"
if test $res -eq 1
then
err="${err};$die_msg"
for_status="$1"
;;
-n|--summary-limit)
- if summary_limit=$(($2 + 0)) 2>/dev/null && test "$summary_limit" = "$2"
- then
- :
- else
- usage
- fi
+ summary_limit="$2"
+ isnumber "$summary_limit" || usage
shift
;;
+ --summary-limit=*)
+ summary_limit="${1#--summary-limit=}"
+ isnumber "$summary_limit" || usage
+ ;;
--)
shift
break
fi
cd_to_toplevel
+ eval "set $(git rev-parse --sq --prefix "$wt_prefix" -- "$@")"
# Get modified modules cared by user
modules=$(git $diff_cmd $cached --ignore-submodules=dirty --raw $head -- "$@" |
sane_egrep '^:([0-7]* )?160000' |
! GIT_DIR="$name/.git" git-rev-parse -q --verify $sha1_dst^0 >/dev/null &&
missing_dst=t
+ display_name=$(relative_path "$name")
+
total_commits=
case "$missing_src,$missing_dst" in
t,)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_src")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commit \$sha1_src")"
;;
,t)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commit \$sha1_dst")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commit \$sha1_dst")"
;;
t,t)
- errmsg="$(eval_gettext " Warn: \$name doesn't contain commits \$sha1_src and \$sha1_dst")"
+ errmsg="$(eval_gettext " Warn: \$display_name doesn't contain commits \$sha1_src and \$sha1_dst")"
;;
*)
errmsg=
submodule="$(gettext "submodule")"
if test $mod_dst = 160000
then
- echo "* $name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
+ echo "* $display_name $sha1_abbr_src($blob)->$sha1_abbr_dst($submodule)$total_commits:"
else
- echo "* $name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
+ echo "* $display_name $sha1_abbr_src($submodule)->$sha1_abbr_dst($blob)$total_commits:"
fi
else
- echo "* $name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
+ echo "* $display_name $sha1_abbr_src...$sha1_abbr_dst$total_commits:"
fi
if test -n "$errmsg"
then
done |
if test -n "$for_status"; then
if [ -n "$files" ]; then
- gettextln "# Submodules changed but not updated:"
+ gettextln "Submodules changed but not updated:" | git stripspace -c
else
- gettextln "# Submodule changes to be committed:"
+ gettextln "Submodule changes to be committed:" | git stripspace -c
fi
- echo "#"
- sed -e 's|^|# |' -e 's|^# $|#|'
+ printf "\n" | git stripspace -c
+ git stripspace -c
else
cat
fi
die_if_unmatched "$mode"
name=$(module_name "$sm_path") || exit
url=$(git config submodule."$name".url)
- displaypath="$prefix$sm_path"
+ displaypath=$(relative_path "$prefix$sm_path")
if test "$stage" = U
then
say "U$sha1 $displaypath"
say "-$sha1 $displaypath"
continue;
fi
- set_name_rev "$sm_path" "$sha1"
if git diff-files --ignore-submodules=dirty --quiet -- "$sm_path"
then
+ set_name_rev "$sm_path" "$sha1"
say " $sha1 $displaypath$revname"
else
if test -z "$cached"
then
sha1=$(clear_local_git_env; cd "$sm_path" && git rev-parse --verify HEAD)
- set_name_rev "$sm_path" "$sha1"
fi
+ set_name_rev "$sm_path" "$sha1"
say "+$sha1 $displaypath$revname"
fi
if git config "submodule.$name.url" >/dev/null 2>/dev/null
then
- say "$(eval_gettext "Synchronizing submodule url for '\$prefix\$sm_path'")"
+ displaypath=$(relative_path "$prefix$sm_path")
+ say "$(eval_gettext "Synchronizing submodule url for '\$displaypath'")"
git config submodule."$name".url "$super_config_url"
if test -e "$sm_path"/.git
while test $# != 0 && test -z "$command"
do
case "$1" in
- add | foreach | init | update | status | summary | sync)
+ add | foreach | init | deinit | update | status | summary | sync)
command=$1
;;
-q|--quiet)