git push gh &&
test ...
+ - Check the test coverage for your tests. See the "Test coverage"
+ below.
+
+ Don't blindly follow test coverage metrics, they're a good way to
+ spot if you've missed something. If a new function you added
+ doesn't have any coverage you're probably doing something wrong,
+ but having 100% coverage doesn't necessarily mean that you tested
+ everything.
+
+ Tests that are likely to smoke out future regressions are better
+ than tests that just inflate the coverage metrics.
+
Don't:
- exit() within a <script> part.
Skipping tests
--------------
-If you need to skip all the remaining tests you should set skip_all
-and immediately call test_done. The string you give to skip_all will
-be used as an explanation for why the test was skipped. for instance:
+If you need to skip tests you should do so be using the three-arg form
+of the test_* functions (see the "Test harness library" section
+below), e.g.:
+
+ test_expect_success PERL 'I need Perl' "
+ '$PERL_PATH' -e 'hlagh() if unf_unf()'
+ "
+
+The advantage of skipping tests like this is that platforms that don't
+have the PERL and other optional dependencies get an indication of how
+many tests they're missing.
+
+If the test code is too hairy for that (i.e. does a lot of setup work
+outside test assertions) you can also skip all remaining tests by
+setting skip_all and immediately call test_done:
if ! test_have_prereq PERL
then
test_done
fi
+The string you give to skip_all will be used as an explanation for why
+the test was skipped.
+
End with test_done
------------------
<expected> file. This behaves like "cmp" but produces more
helpful output when the test is run with "-v" option.
+ - test_path_is_file <file> [<diagnosis>]
+ test_path_is_dir <dir> [<diagnosis>]
+ test_path_is_missing <path> [<diagnosis>]
+
+ Check whether a file/directory exists or doesn't. <diagnosis> will
+ be displayed if the test fails.
+
- test_when_finished <script>
Prepend <script> to a list of commands to run to clean up
validation in one place. Your test also ends up needing
updating when such a change to the internal happens, so do _not_
do it and leave the low level of validation to t0000-basic.sh.
+
+Test coverage
+-------------
+
+You can use the coverage tests to find code paths that are not being
+used or properly exercised yet.
+
+To do that, run the coverage target at the top-level (not in the t/
+directory):
+
+ make coverage
+
+That'll compile Git with GCC's coverage arguments, and generate a test
+report with gcov after the tests finish. Running the coverage tests
+can take a while, since running the tests in parallel is incompatible
+with GCC's coverage mode.
+
+After the tests have run you can generate a list of untested
+functions:
+
+ make coverage-untested-functions
+
+You can also generate a detailed per-file HTML report using the
+Devel::Cover module. To install it do:
+
+ # On Debian or Ubuntu:
+ sudo aptitude install libdevel-cover-perl
+
+ # From the CPAN with cpanminus
+ curl -L http://cpanmin.us | perl - --sudo --self-upgrade
+ cpanm --sudo Devel::Cover
+
+Then, at the top-level:
+
+ make cover_db_html
+
+That'll generate a detailed cover report in the "cover_db_html"
+directory, which you can then copy to a webserver, or inspect locally
+in a browser.
+
+Smoke testing
+-------------
+
+The Git test suite has support for smoke testing. Smoke testing is
+when you submit the results of a test run to a central server for
+analysis and aggregation.
+
+Running a smoke tester is an easy and valuable way of contributing to
+Git development, particularly if you have access to an uncommon OS on
+obscure hardware.
+
+After building Git you can generate a smoke report like this in the
+"t" directory:
+
+ make clean smoke
+
+You can also pass arguments via the environment. This should make it
+faster:
+
+ GIT_TEST_OPTS='--root=/dev/shm' TEST_JOBS=10 make clean smoke
+
+The "smoke" target will run the Git test suite with Perl's
+"TAP::Harness" module, and package up the results in a .tar.gz archive
+with "TAP::Harness::Archive". The former is included with Perl v5.10.1
+or later, but you'll need to install the latter from the CPAN. See the
+"Test coverage" section above for how you might do that.
+
+Once the "smoke" target finishes you'll see a message like this:
+
+ TAP Archive created at <path to git>/t/test-results/git-smoke.tar.gz
+
+To upload the smoke report you need to have curl(1) installed, then
+do:
+
+ make smoke_report
+
+To upload the report anonymously. Hopefully that'll return something
+like "Reported #7 added.".
+
+If you're going to be uploading reports frequently please request a
+user account by E-Mailing gitsmoke@v.nix.is. Once you have a username
+and password you'll be able to do:
+
+ SMOKE_USERNAME=<username> SMOKE_PASSWORD=<password> make smoke_report
+
+You can also add an additional comment to attach to the report, and/or
+a comma separated list of tags:
+
+ SMOKE_USERNAME=<username> SMOKE_PASSWORD=<password> \
+ SMOKE_COMMENT=<comment> SMOKE_TAGS=<tags> \
+ make smoke_report
+
+Once the report is uploaded it'll be made available at
+http://smoke.git.nix.is, here's an overview of Recent Smoke Reports
+for Git:
+
+ http://smoke.git.nix.is/app/projects/smoke_reports/1
+
+The reports will also be mirrored to GitHub every few hours:
+
+ http://github.com/gitsmoke/smoke-reports
+
+The Smolder SQLite database is also mirrored and made available for
+download:
+
+ http://github.com/gitsmoke/smoke-database
+
+Note that the database includes hashed (with crypt()) user passwords
+and E-Mail addresses. Don't use a valuable password for the smoke
+service if you have an account, or an E-Mail address you don't want to
+be publicly known. The user accounts are just meant to be convenient
+labels, they're not meant to be secure.