#!/bin/sh
#
# Copyright (c) 2012 Avery Pennaraum
+# Copyright (c) 2015 Alexey Shumkin
#
test_description='Basic porcelain support for subtrees
fi
}
-fixnl()
-{
- t=""
- while read x; do
- t="$t$x "
- done
- echo $t
-}
-
-multiline()
-{
- while read x; do
- set -- $x
- for d in "$@"; do
- echo "$d"
- done
- done
-}
-
undo()
{
git reset --hard HEAD~
}
test_expect_success 'init subproj' '
- test_create_repo subproj
+ test_create_repo "sub proj"
'
# To the subproject!
-cd subproj
+cd ./"sub proj"
test_expect_success 'add sub1' '
- create sub1 &&
- git commit -m "sub1" &&
- git branch sub1 &&
- git branch -m master subproj
+ create sub1 &&
+ git commit -m "sub1" &&
+ git branch sub1 &&
+ git branch -m master subproj
'
# Save this hash for testing later.
subdir_hash=$(git rev-parse HEAD)
test_expect_success 'add sub2' '
- create sub2 &&
- git commit -m "sub2" &&
- git branch sub2
+ create sub2 &&
+ git commit -m "sub2" &&
+ git branch sub2
'
test_expect_success 'add sub3' '
- create sub3 &&
- git commit -m "sub3" &&
- git branch sub3
+ create sub3 &&
+ git commit -m "sub3" &&
+ git branch sub3
'
# Back to mainline
cd ..
+test_expect_success 'enable log.date=relative to catch errors' '
+ git config log.date relative
+'
+
test_expect_success 'add main4' '
- create main4 &&
- git commit -m "main4" &&
- git branch -m master mainline &&
- git branch subdir
+ create main4 &&
+ git commit -m "main4" &&
+ git branch -m master mainline &&
+ git branch subdir
'
test_expect_success 'fetch subproj history' '
- git fetch ./subproj sub1 &&
- git branch sub1 FETCH_HEAD
+ git fetch ./"sub proj" sub1 &&
+ git branch sub1 FETCH_HEAD
'
test_expect_success 'no subtree exists in main tree' '
- test_must_fail git subtree merge --prefix=subdir sub1
+ test_must_fail git subtree merge --prefix="sub dir" sub1
'
test_expect_success 'no pull from non-existant subtree' '
- test_must_fail git subtree pull --prefix=subdir ./subproj sub1
+ test_must_fail git subtree pull --prefix="sub dir" ./"sub proj" sub1
'
test_expect_success 'check if --message works for add' '
- git subtree add --prefix=subdir --message="Added subproject" sub1 &&
- check_equal ''"$(last_commit_message)"'' "Added subproject" &&
- undo
+ git subtree add --prefix="sub dir" --message="Added subproject" sub1 &&
+ check_equal ''"$(last_commit_message)"'' "Added subproject" &&
+ undo
'
test_expect_success 'check if --message works as -m and --prefix as -P' '
- git subtree add -P subdir -m "Added subproject using git subtree" sub1 &&
- check_equal ''"$(last_commit_message)"'' "Added subproject using git subtree" &&
- undo
+ git subtree add -P "sub dir" -m "Added subproject using git subtree" sub1 &&
+ check_equal ''"$(last_commit_message)"'' "Added subproject using git subtree" &&
+ undo
'
test_expect_success 'check if --message works with squash too' '
- git subtree add -P subdir -m "Added subproject with squash" --squash sub1 &&
- check_equal ''"$(last_commit_message)"'' "Added subproject with squash" &&
- undo
+ git subtree add -P "sub dir" -m "Added subproject with squash" --squash sub1 &&
+ check_equal ''"$(last_commit_message)"'' "Added subproject with squash" &&
+ undo
'
test_expect_success 'add subproj to mainline' '
- git subtree add --prefix=subdir/ FETCH_HEAD &&
- check_equal ''"$(last_commit_message)"'' "Add '"'subdir/'"' from commit '"'"'''"$(git rev-parse sub1)"'''"'"'"
+ git subtree add --prefix="sub dir"/ FETCH_HEAD &&
+ check_equal ''"$(last_commit_message)"'' "Add '"'sub dir/'"' from commit '"'"'''"$(git rev-parse sub1)"'''"'"'"
'
# this shouldn't actually do anything, since FETCH_HEAD is already a parent
test_expect_success 'merge fetched subproj' '
- git merge -m "merge -s -ours" -s ours FETCH_HEAD
+ git merge -m "merge -s -ours" -s ours FETCH_HEAD
'
test_expect_success 'add main-sub5' '
- create subdir/main-sub5 &&
- git commit -m "main-sub5"
+ create "sub dir/main-sub5" &&
+ git commit -m "main-sub5"
'
test_expect_success 'add main6' '
- create main6 &&
- git commit -m "main6 boring"
+ create main6 &&
+ git commit -m "main6 boring"
'
test_expect_success 'add main-sub7' '
- create subdir/main-sub7 &&
- git commit -m "main-sub7"
+ create "sub dir/main-sub7" &&
+ git commit -m "main-sub7"
'
test_expect_success 'fetch new subproj history' '
- git fetch ./subproj sub2 &&
- git branch sub2 FETCH_HEAD
+ git fetch ./"sub proj" sub2 &&
+ git branch sub2 FETCH_HEAD
'
test_expect_success 'check if --message works for merge' '
- git subtree merge --prefix=subdir -m "Merged changes from subproject" sub2 &&
- check_equal ''"$(last_commit_message)"'' "Merged changes from subproject" &&
- undo
+ git subtree merge --prefix="sub dir" -m "Merged changes from subproject" sub2 &&
+ check_equal ''"$(last_commit_message)"'' "Merged changes from subproject" &&
+ undo
'
test_expect_success 'check if --message for merge works with squash too' '
- git subtree merge --prefix subdir -m "Merged changes from subproject using squash" --squash sub2 &&
- check_equal ''"$(last_commit_message)"'' "Merged changes from subproject using squash" &&
- undo
+ git subtree merge --prefix "sub dir" -m "Merged changes from subproject using squash" --squash sub2 &&
+ check_equal ''"$(last_commit_message)"'' "Merged changes from subproject using squash" &&
+ undo
'
test_expect_success 'merge new subproj history into subdir' '
- git subtree merge --prefix=subdir FETCH_HEAD &&
- git branch pre-split &&
- check_equal ''"$(last_commit_message)"'' "Merge commit '"'"'"$(git rev-parse sub2)"'"'"' into mainline"
+ git subtree merge --prefix="sub dir" FETCH_HEAD &&
+ git branch pre-split &&
+ check_equal ''"$(last_commit_message)"'' "Merge commit '"'"'"$(git rev-parse sub2)"'"'"' into mainline" &&
+ undo
'
test_expect_success 'Check that prefix argument is required for split' '
- echo "You must provide the --prefix option." > expected &&
- test_must_fail git subtree split > actual 2>&1 &&
+ echo "You must provide the --prefix option." > expected &&
+ test_must_fail git subtree split > actual 2>&1 &&
test_debug "printf '"'"'expected: '"'"'" &&
- test_debug "cat expected" &&
+ test_debug "cat expected" &&
test_debug "printf '"'"'actual: '"'"'" &&
- test_debug "cat actual" &&
- test_cmp expected actual &&
- rm -f expected actual
+ test_debug "cat actual" &&
+ test_cmp expected actual &&
+ rm -f expected actual
'
test_expect_success 'Check that the <prefix> exists for a split' '
- echo "'"'"'non-existent-directory'"'"'" does not exist\; use "'"'"'git subtree add'"'"'" > expected &&
- test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
+ echo "'"'"'non-existent-directory'"'"'" does not exist\; use "'"'"'git subtree add'"'"'" > expected &&
+ test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
test_debug "printf '"'"'expected: '"'"'" &&
- test_debug "cat expected" &&
+ test_debug "cat expected" &&
test_debug "printf '"'"'actual: '"'"'" &&
- test_debug "cat actual" &&
- test_cmp expected actual
-# rm -f expected actual
+ test_debug "cat actual" &&
+ test_cmp expected actual
+# rm -f expected actual
'
test_expect_success 'check if --message works for split+rejoin' '
- spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
- git branch spl1 "$spl1" &&
- check_equal ''"$(last_commit_message)"'' "Split & rejoin" &&
- undo
+ spl1=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
+ git branch spl1 "$spl1" &&
+ check_equal ''"$(last_commit_message)"'' "Split & rejoin" &&
+ undo
'
test_expect_success 'check split with --branch' '
- spl1=$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin) &&
+ spl1=$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin) &&
undo &&
- git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr1 &&
+ git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --branch splitbr1 &&
check_equal ''"$(git rev-parse splitbr1)"'' "$spl1"
'
test_expect_success 'check hash of split' '
- spl1=$(git subtree split --prefix subdir) &&
- undo &&
- git subtree split --prefix subdir --branch splitbr1test &&
- check_equal ''"$(git rev-parse splitbr1test)"'' "$spl1"
- git checkout splitbr1test &&
- new_hash=$(git rev-parse HEAD~2) &&
- git checkout mainline &&
+ spl1=$(git subtree split --prefix "sub dir") &&
+ git subtree split --prefix "sub dir" --branch splitbr1test &&
+ check_equal ''"$(git rev-parse splitbr1test)"'' "$spl1" &&
+ new_hash=$(git rev-parse splitbr1test~2) &&
check_equal ''"$new_hash"'' "$subdir_hash"
'
test_expect_success 'check split with --branch for an existing branch' '
- spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
- undo &&
- git branch splitbr2 sub1 &&
- git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr2 &&
- check_equal ''"$(git rev-parse splitbr2)"'' "$spl1"
+ spl1=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
+ undo &&
+ git branch splitbr2 sub1 &&
+ git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --branch splitbr2 &&
+ check_equal ''"$(git rev-parse splitbr2)"'' "$spl1"
'
test_expect_success 'check split with --branch for an incompatible branch' '
- test_must_fail git subtree split --prefix subdir --onto FETCH_HEAD --branch subdir
+ test_must_fail git subtree split --prefix "sub dir" --onto FETCH_HEAD --branch subdir
'
test_expect_success 'check split+rejoin' '
- spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
- undo &&
- git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --rejoin &&
- check_equal ''"$(last_commit_message)"'' "Split '"'"'subdir/'"'"' into commit '"'"'"$spl1"'"'"'"
+ spl1=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
+ undo &&
+ git subtree split --annotate='"'*'"' --prefix "sub dir" --onto FETCH_HEAD --rejoin &&
+ check_equal ''"$(last_commit_message)"'' "Split '"'"'sub dir/'"'"' into commit '"'"'"$spl1"'"'"'"
'
test_expect_success 'add main-sub8' '
- create subdir/main-sub8 &&
- git commit -m "main-sub8"
+ create "sub dir/main-sub8" &&
+ git commit -m "main-sub8"
'
# To the subproject!
-cd ./subproj
+cd ./"sub proj"
test_expect_success 'merge split into subproj' '
- git fetch .. spl1 &&
- git branch spl1 FETCH_HEAD &&
- git merge FETCH_HEAD
+ git fetch .. spl1 &&
+ git branch spl1 FETCH_HEAD &&
+ git merge FETCH_HEAD
'
test_expect_success 'add sub9' '
- create sub9 &&
- git commit -m "sub9"
+ create sub9 &&
+ git commit -m "sub9"
'
# Back to mainline
cd ..
test_expect_success 'split for sub8' '
- split2=''"$(git subtree split --annotate='"'*'"' --prefix subdir/ --rejoin)"''
- git branch split2 "$split2"
+ split2=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir/" --rejoin)"'' &&
+ git branch split2 "$split2"
'
test_expect_success 'add main-sub10' '
- create subdir/main-sub10 &&
- git commit -m "main-sub10"
+ create "sub dir/main-sub10" &&
+ git commit -m "main-sub10"
'
test_expect_success 'split for sub10' '
- spl3=''"$(git subtree split --annotate='"'*'"' --prefix subdir --rejoin)"'' &&
- git branch spl3 "$spl3"
+ spl3=''"$(git subtree split --annotate='"'*'"' --prefix "sub dir" --rejoin)"'' &&
+ git branch spl3 "$spl3"
'
# To the subproject!
-cd ./subproj
+cd ./"sub proj"
test_expect_success 'merge split into subproj' '
- git fetch .. spl3 &&
- git branch spl3 FETCH_HEAD &&
- git merge FETCH_HEAD &&
- git branch subproj-merge-spl3
-'
-
-chkm="main4 main6"
-chkms="main-sub10 main-sub5 main-sub7 main-sub8"
-chkms_sub=$(echo $chkms | multiline | sed 's,^,subdir/,' | fixnl)
-chks="sub1 sub2 sub3 sub9"
-chks_sub=$(echo $chks | multiline | sed 's,^,subdir/,' | fixnl)
+ git fetch .. spl3 &&
+ git branch spl3 FETCH_HEAD &&
+ git merge FETCH_HEAD &&
+ git branch subproj-merge-spl3
+'
+
+chkm="main4
+main6"
+chkms="main-sub10
+main-sub5
+main-sub7
+main-sub8"
+chkms_sub=$(cat <<TXT | sed 's,^,sub dir/,'
+$chkms
+TXT
+)
+chks="sub1
+sub2
+sub3
+sub9"
+chks_sub=$(cat <<TXT | sed 's,^,sub dir/,'
+$chks
+TXT
+)
test_expect_success 'make sure exactly the right set of files ends up in the subproj' '
- subfiles=''"$(git ls-files | fixnl)"'' &&
- check_equal "$subfiles" "$chkms $chks"
+ subfiles="$(git ls-files)" &&
+ check_equal "$subfiles" "$chkms
+$chks"
'
-
test_expect_success 'make sure the subproj history *only* contains commits that affect the subdir' '
- allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' &&
- check_equal "$allchanges" "$chkms $chks"
+ allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | sed "/^$/d")"'' &&
+ check_equal "$allchanges" "$chkms
+$chks"
'
# Back to mainline
cd ..
test_expect_success 'pull from subproj' '
- git fetch ./subproj subproj-merge-spl3 &&
- git branch subproj-merge-spl3 FETCH_HEAD &&
- git subtree pull --prefix=subdir ./subproj subproj-merge-spl3
+ git fetch ./"sub proj" subproj-merge-spl3 &&
+ git branch subproj-merge-spl3 FETCH_HEAD &&
+ git subtree pull --prefix="sub dir" ./"sub proj" subproj-merge-spl3
'
test_expect_success 'make sure exactly the right set of files ends up in the mainline' '
- mainfiles=''"$(git ls-files | fixnl)"'' &&
- check_equal "$mainfiles" "$chkm $chkms_sub $chks_sub"
+ mainfiles=$(git ls-files) &&
+ check_equal "$mainfiles" "$chkm
+$chkms_sub
+$chks_sub"
'
test_expect_success 'make sure each filename changed exactly once in the entire history' '
- # main-sub?? and /subdir/main-sub?? both change, because those are the
- # changes that were split into their own history. And subdir/sub?? never
- # change, since they were *only* changed in the subtree branch.
- allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' &&
- check_equal "$allchanges" ''"$(echo $chkms $chkm $chks $chkms_sub | multiline | sort | fixnl)"''
+ # main-sub?? and /subdir/main-sub?? both change, because those are the
+ # changes that were split into their own history. And subdir/sub?? never
+ # change, since they were *only* changed in the subtree branch.
+ allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | sed "/^$/d")"'' &&
+ check_equal "$allchanges" ''"$(cat <<TXT | sort
+$chkms
+$chkm
+$chks
+$chkms_sub
+TXT
+)"''
'
test_expect_success 'make sure the --rejoin commits never make it into subproj' '
- check_equal ''"$(git log --pretty=format:'"'%s'"' HEAD^2 | grep -i split)"'' ""
+ check_equal ''"$(git log --pretty=format:'"'%s'"' HEAD^2 | grep -i split)"'' ""
'
test_expect_success 'make sure no "git subtree" tagged commits make it into subproj' '
- # They are meaningless to subproj since one side of the merge refers to the mainline
- check_equal ''"$(git log --pretty=format:'"'%s%n%b'"' HEAD^2 | grep "git-subtree.*:")"'' ""
+ # They are meaningless to subproj since one side of the merge refers to the mainline
+ check_equal ''"$(git log --pretty=format:'"'%s%n%b'"' HEAD^2 | grep "git-subtree.*:")"'' ""
'
# prepare second pair of repositories
cd test2
test_expect_success 'init main' '
- test_create_repo main
+ test_create_repo main
'
cd main
test_expect_success 'add main1' '
- create main1 &&
- git commit -m "main1"
+ create main1 &&
+ git commit -m "main1"
'
cd ..
test_expect_success 'init sub' '
- test_create_repo sub
+ test_create_repo sub
'
cd sub
test_expect_success 'add sub2' '
- create sub2 &&
- git commit -m "sub2"
+ create sub2 &&
+ git commit -m "sub2"
'
cd ../main
# check if split can find proper base without --onto
test_expect_success 'add sub as subdir in main' '
- git fetch ../sub master &&
- git branch sub2 FETCH_HEAD &&
- git subtree add --prefix subdir sub2
+ git fetch ../sub master &&
+ git branch sub2 FETCH_HEAD &&
+ git subtree add --prefix "sub dir" sub2
'
cd ../sub
test_expect_success 'add sub3' '
- create sub3 &&
- git commit -m "sub3"
+ create sub3 &&
+ git commit -m "sub3"
'
cd ../main
test_expect_success 'merge from sub' '
- git fetch ../sub master &&
- git branch sub3 FETCH_HEAD &&
- git subtree merge --prefix subdir sub3
+ git fetch ../sub master &&
+ git branch sub3 FETCH_HEAD &&
+ git subtree merge --prefix "sub dir" sub3
'
test_expect_success 'add main-sub4' '
- create subdir/main-sub4 &&
- git commit -m "main-sub4"
+ create "sub dir/main-sub4" &&
+ git commit -m "main-sub4"
'
test_expect_success 'split for main-sub4 without --onto' '
- git subtree split --prefix subdir --branch mainsub4
+ git subtree split --prefix "sub dir" --branch mainsub4
'
# at this point, the new commit parent should be sub3 if it is not,
# itself)
test_expect_success 'check that the commit parent is sub3' '
- check_equal ''"$(git log --pretty=format:%P -1 mainsub4)"'' ''"$(git rev-parse sub3)"''
+ check_equal ''"$(git log --pretty=format:%P -1 mainsub4)"'' ''"$(git rev-parse sub3)"''
'
test_expect_success 'add main-sub5' '
- mkdir subdir2 &&
- create subdir2/main-sub5 &&
- git commit -m "main-sub5"
+ mkdir subdir2 &&
+ create subdir2/main-sub5 &&
+ git commit -m "main-sub5"
'
test_expect_success 'split for main-sub5 without --onto' '
- # also test that we still can split out an entirely new subtree
- # if the parent of the first commit in the tree is not empty,
+ # also test that we still can split out an entirely new subtree
+ # if the parent of the first commit in the tree is not empty,
# then the new subtree has accidentally been attached to something
- git subtree split --prefix subdir2 --branch mainsub5 &&
- check_equal ''"$(git log --pretty=format:%P -1 mainsub5)"'' ""
+ git subtree split --prefix subdir2 --branch mainsub5 &&
+ check_equal ''"$(git log --pretty=format:%P -1 mainsub5)"'' ""
'
# make sure no patch changes more than one file. The original set of commits
}
test_expect_success 'verify one file change per commit' '
- x= &&
- list=''"$(git log --pretty=format:'"'commit: %H'"' | joincommits)"'' &&
-# test_debug "echo HERE" &&
-# test_debug "echo ''"$list"''" &&
- (git log --pretty=format:'"'commit: %H'"' | joincommits |
- ( while read commit a b; do
- test_debug "echo Verifying commit "''"$commit"''
- test_debug "echo a: "''"$a"''
- test_debug "echo b: "''"$b"''
- check_equal "$b" ""
- x=1
- done
- check_equal "$x" 1
- ))
+ x= &&
+ list=''"$(git log --pretty=format:'"'commit: %H'"' | joincommits)"'' &&
+# test_debug "echo HERE" &&
+# test_debug "echo ''"$list"''" &&
+ (git log --pretty=format:'"'commit: %H'"' | joincommits |
+ ( while read commit a b; do
+ test_debug "echo Verifying commit "''"$commit"''
+ test_debug "echo a: "''"$a"''
+ test_debug "echo b: "''"$b"''
+ check_equal "$b" ""
+ x=1
+ done
+ check_equal "$x" 1
+ ))
+'
+
+# test push
+
+cd ../..
+
+mkdir test-push
+
+cd test-push
+
+test_expect_success 'init main' '
+ test_create_repo main
+'
+
+test_expect_success 'init sub' '
+ test_create_repo "sub project"
+'
+
+cd ./"sub project"
+
+test_expect_success 'add subproject' '
+ create "sub project" &&
+ git commit -m "Sub project: 1" &&
+ git branch sub-branch-1
+'
+
+cd ../main
+
+test_expect_success 'make first commit and add subproject' '
+ create "main-1" &&
+ git commit -m "main: 1" &&
+ git subtree add "../sub project" --prefix "sub dir" --message "Added subproject" sub-branch-1 &&
+ check_equal "$(last_commit_message)" "Added subproject"
+'
+
+test_expect_success 'make second commit to a subproject file and push it into a sub project' '
+ create "sub dir/sub1" &&
+ git commit -m "Sub project: 2" &&
+ git subtree push "../sub project" --prefix "sub dir" sub-branch-1
+'
+
+cd ../"sub project"
+
+test_expect_success 'Test second commit is pushed' '
+ git checkout sub-branch-1 &&
+ check_equal "$(last_commit_message)" "Sub project: 2"
'
test_done