Merge branch 'dw/signoff-doc' into maint
[gitweb.git] / contrib / subtree / t / t7900-subtree.sh
index 6309d124ca2c97b2b1b9262c7b9470c576870069..751aee3a0cd782c9eb1f98cb78f582011fb0b181 100755 (executable)
@@ -1,10 +1,11 @@
 #!/bin/sh
 #
 # Copyright (c) 2012 Avery Pennaraum
+# Copyright (c) 2015 Alexey Shumkin
 #
 test_description='Basic porcelain support for subtrees
 
-This test verifies the basic operation of the merge, pull, add
+This test verifies the basic operation of the add, pull, merge
 and split subcommands of git subtree.
 '
 
@@ -13,13 +14,21 @@ export TEST_DIRECTORY
 
 . ../../../t/test-lib.sh
 
+subtree_test_create_repo()
+{
+       test_create_repo "$1"
+       (
+               cd $1
+               git config log.date relative
+       )
+}
+
 create()
 {
        echo "$1" >"$1"
        git add "$1"
 }
 
-
 check_equal()
 {
        test_debug 'echo'
@@ -32,438 +41,977 @@ check_equal()
        fi
 }
 
-fixnl()
+undo()
 {
-       t=""
-       while read x; do
-               t="$t$x "
-       done
-       echo $t
+       git reset --hard HEAD~
 }
 
-multiline()
+# Make sure no patch changes more than one file.
+# The original set of commits changed only one file each.
+# A multi-file change would imply that we pruned commits
+# too aggressively.
+join_commits()
 {
-       while read x; do
-               set -- $x
-               for d in "$@"; do
-                       echo "$d"
-               done
+       commit=
+       all=
+       while read x y; do
+               if [ -z "$x" ]; then
+                       continue
+               elif [ "$x" = "commit:" ]; then
+                       if [ -n "$commit" ]; then
+                               echo "$commit $all"
+                               all=
+                       fi
+                       commit="$y"
+               else
+                       all="$all $y"
+               fi
        done
+       echo "$commit $all"
 }
 
-undo()
-{
-       git reset --hard HEAD~
-}
+test_create_commit() (
+       repo=$1
+       commit=$2
+       cd "$repo"
+       mkdir -p $(dirname "$commit") \
+       || error "Could not create directory for commit"
+       echo "$commit" >"$commit"
+       git add "$commit" || error "Could not add commit"
+       git commit -m "$commit" || error "Could not commit"
+)
 
 last_commit_message()
 {
        git log --pretty=format:%s -1
 }
 
-test_expect_success 'init subproj' '
-        test_create_repo subproj
-'
-
-# To the subproject!
-cd subproj
-
-test_expect_success 'add sub1' '
-        create sub1 &&
-        git commit -m "sub1" &&
-        git branch sub1 &&
-        git branch -m master subproj
-'
-
-# Save this hash for testing later.
-
-subdir_hash=$(git rev-parse HEAD)
-
-test_expect_success 'add sub2' '
-        create sub2 &&
-        git commit -m "sub2" &&
-        git branch sub2
-'
-
-test_expect_success 'add sub3' '
-        create sub3 &&
-        git commit -m "sub3" &&
-        git branch sub3
-'
-
-# Back to mainline
-cd ..
-
-test_expect_success 'add main4' '
-        create main4 &&
-        git commit -m "main4" &&
-        git branch -m master mainline &&
-        git branch subdir
-'
-
-test_expect_success 'fetch subproj history' '
-        git fetch ./subproj sub1 &&
-        git branch sub1 FETCH_HEAD
-'
-
-test_expect_success 'no subtree exists in main tree' '
-        test_must_fail git subtree merge --prefix=subdir sub1
-'
-
-test_expect_success 'no pull from non-existant subtree' '
-        test_must_fail git subtree pull --prefix=subdir ./subproj sub1
-'
-
-test_expect_success 'check if --message works for add' '
-        git subtree add --prefix=subdir --message="Added subproject" sub1 &&
-        check_equal ''"$(last_commit_message)"'' "Added subproject" &&
-        undo
-'
-
-test_expect_success 'check if --message works as -m and --prefix as -P' '
-        git subtree add -P subdir -m "Added subproject using git subtree" sub1 &&
-        check_equal ''"$(last_commit_message)"'' "Added subproject using git subtree" &&
-        undo
-'
-
-test_expect_success 'check if --message works with squash too' '
-        git subtree add -P subdir -m "Added subproject with squash" --squash sub1 &&
-        check_equal ''"$(last_commit_message)"'' "Added subproject with squash" &&
-        undo
-'
-
-test_expect_success 'add subproj to mainline' '
-        git subtree add --prefix=subdir/ FETCH_HEAD &&
-        check_equal ''"$(last_commit_message)"'' "Add '"'subdir/'"' from commit '"'"'''"$(git rev-parse sub1)"'''"'"'"
-'
-
-# this shouldn't actually do anything, since FETCH_HEAD is already a parent
-test_expect_success 'merge fetched subproj' '
-        git merge -m "merge -s -ours" -s ours FETCH_HEAD
-'
-
-test_expect_success 'add main-sub5' '
-        create subdir/main-sub5 &&
-        git commit -m "main-sub5"
-'
-
-test_expect_success 'add main6' '
-        create main6 &&
-        git commit -m "main6 boring"
-'
-
-test_expect_success 'add main-sub7' '
-        create subdir/main-sub7 &&
-        git commit -m "main-sub7"
-'
-
-test_expect_success 'fetch new subproj history' '
-        git fetch ./subproj sub2 &&
-        git branch sub2 FETCH_HEAD
-'
-
-test_expect_success 'check if --message works for merge' '
-        git subtree merge --prefix=subdir -m "Merged changes from subproject" sub2 &&
-        check_equal ''"$(last_commit_message)"'' "Merged changes from subproject" &&
-        undo
-'
-
-test_expect_success 'check if --message for merge works with squash too' '
-        git subtree merge --prefix subdir -m "Merged changes from subproject using squash" --squash sub2 &&
-        check_equal ''"$(last_commit_message)"'' "Merged changes from subproject using squash" &&
-        undo
-'
+subtree_test_count=0
+next_test() {
+       subtree_test_count=$(($subtree_test_count+1))
+}
 
-test_expect_success 'merge new subproj history into subdir' '
-        git subtree merge --prefix=subdir FETCH_HEAD &&
-        git branch pre-split &&
-        check_equal ''"$(last_commit_message)"'' "Merge commit '"'"'"$(git rev-parse sub2)"'"'"' into mainline"
-'
+#
+# Tests for 'git subtree add'
+#
 
-test_expect_success 'Check that prefix argument is required for split' '
-        echo "You must provide the --prefix option." > expected &&
-        test_must_fail git subtree split > actual 2>&1 &&
-       test_debug "printf '"'"'expected: '"'"'" &&
-        test_debug "cat expected" &&
-       test_debug "printf '"'"'actual: '"'"'" &&
-        test_debug "cat actual" &&
-        test_cmp expected actual &&
-        rm -f expected actual
+next_test
+test_expect_success 'no merge from non-existent subtree' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               test_must_fail git subtree merge --prefix="sub dir" FETCH_HEAD
+       )
+'
+
+next_test
+test_expect_success 'no pull from non-existent subtree' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               test_must_fail git subtree pull --prefix="sub dir" ./"sub proj" master
+       )'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --prefix' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Add '\''sub dir/'\'' from commit '\''$(git rev-parse FETCH_HEAD)'\''"
+       )
+'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --prefix and --message' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" --message="Added subproject" FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Added subproject"
+       )
+'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --prefix as -P and --message as -m' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add -P "sub dir" -m "Added subproject" FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Added subproject"
+       )
+'
+
+next_test
+test_expect_success 'add subproj as subtree into sub dir/ with --squash and --prefix and --message' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" --message="Added subproject with squash" --squash FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Added subproject with squash"
+       )
 '
 
-test_expect_success 'Check that the <prefix> exists for a split' '
-        echo "'"'"'non-existent-directory'"'"'" does not exist\; use "'"'"'git subtree add'"'"'" > expected &&
-        test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
-       test_debug "printf '"'"'expected: '"'"'" &&
-        test_debug "cat expected" &&
-       test_debug "printf '"'"'actual: '"'"'" &&
-        test_debug "cat actual" &&
-        test_cmp expected actual
-#        rm -f expected actual
-'
+#
+# Tests for 'git subtree merge'
+#
 
-test_expect_success 'check if --message works for split+rejoin' '
-        spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
-        git branch spl1 "$spl1" &&
-        check_equal ''"$(last_commit_message)"'' "Split & rejoin" &&
-        undo
+next_test
+test_expect_success 'merge new subproj history into sub dir/ with --prefix' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Merge commit '\''$(git rev-parse FETCH_HEAD)'\''"
+       )
+'
+
+next_test
+test_expect_success 'merge new subproj history into sub dir/ with --prefix and --message' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" --message="Merged changes from subproject" FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Merged changes from subproject"
+       )
+'
+
+next_test
+test_expect_success 'merge new subproj history into sub dir/ with --squash and --prefix and --message' '
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       subtree_test_create_repo "$subtree_test_count" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" --message="Merged changes from subproject using squash" --squash FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Merged changes from subproject using squash"
+       )
+'
+
+next_test
+test_expect_success 'merge the added subproj again, should do nothing' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD &&
+               # this shouldn not actually do anything, since FETCH_HEAD
+               # is already a parent
+               result=$(git merge -s ours -m "merge -s -ours" FETCH_HEAD) &&
+               check_equal "${result}" "Already up-to-date."
+       )
+'
+
+next_test
+test_expect_success 'merge new subproj history into subdir/ with a slash appended to the argument of --prefix' '
+       test_create_repo "$test_count" &&
+       test_create_repo "$test_count/subproj" &&
+       test_create_commit "$test_count" main1 &&
+       test_create_commit "$test_count/subproj" sub1 &&
+       (
+               cd "$test_count" &&
+               git fetch ./subproj master &&
+               git subtree add --prefix=subdir/ FETCH_HEAD
+       ) &&
+       test_create_commit "$test_count/subproj" sub2 &&
+       (
+               cd "$test_count" &&
+               git fetch ./subproj master &&
+               git subtree merge --prefix=subdir/ FETCH_HEAD &&
+               check_equal "$(last_commit_message)" "Merge commit '\''$(git rev-parse FETCH_HEAD)'\''"
+       )
 '
 
-test_expect_success 'check split with --branch' '
-       spl1=$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin) &&
-       undo &&
-       git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr1 &&
-       check_equal ''"$(git rev-parse splitbr1)"'' "$spl1"
-'
+#
+# Tests for 'git subtree split'
+#
 
+next_test
+test_expect_success 'split requires option --prefix' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD &&
+               echo "You must provide the --prefix option." > expected &&
+               test_must_fail git subtree split > actual 2>&1 &&
+               test_debug "printf '"expected: "'" &&
+               test_debug "cat expected" &&
+               test_debug "printf '"actual: "'" &&
+               test_debug "cat actual" &&
+               test_cmp expected actual
+       )
+'
+
+next_test
+test_expect_success 'split requires path given by option --prefix must exist' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD &&
+               echo "'\''non-existent-directory'\'' does not exist; use '\''git subtree add'\''" > expected &&
+               test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
+               test_debug "printf '"expected: "'" &&
+               test_debug "cat expected" &&
+               test_debug "printf '"actual: "'" &&
+               test_debug "cat actual" &&
+               test_cmp expected actual
+       )
+'
+
+next_test
+test_expect_success 'split sub dir/ with --rejoin' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+               git subtree split --prefix="sub dir" --annotate="*" --rejoin &&
+               check_equal "$(last_commit_message)" "Split '\''sub dir/'\'' into commit '\''$split_hash'\''"
+       )
+ '
+
+next_test
+test_expect_success 'split sub dir/ with --rejoin and --message' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --message="Split & rejoin" --annotate="*" --rejoin &&
+               check_equal "$(last_commit_message)" "Split & rejoin"
+       )
+'
+
+next_test
+test_expect_success 'split "sub dir"/ with --branch' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br &&
+               check_equal "$(git rev-parse subproj-br)" "$split_hash"
+       )
+'
+
+next_test
 test_expect_success 'check hash of split' '
-       spl1=$(git subtree split --prefix subdir) &&
-       undo &&
-       git subtree split --prefix subdir --branch splitbr1test &&
-       check_equal ''"$(git rev-parse splitbr1test)"'' "$spl1"
-       git checkout splitbr1test &&
-       new_hash=$(git rev-parse HEAD~2) &&
-       git checkout mainline &&
-       check_equal ''"$new_hash"'' "$subdir_hash"
-'
-
-test_expect_success 'check split with --branch for an existing branch' '
-        spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
-        undo &&
-        git branch splitbr2 sub1 &&
-        git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --branch splitbr2 &&
-        check_equal ''"$(git rev-parse splitbr2)"'' "$spl1"
-'
-
-test_expect_success 'check split with --branch for an incompatible branch' '
-        test_must_fail git subtree split --prefix subdir --onto FETCH_HEAD --branch subdir
-'
-
-test_expect_success 'check split+rejoin' '
-        spl1=''"$(git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --message "Split & rejoin" --rejoin)"'' &&
-        undo &&
-        git subtree split --annotate='"'*'"' --prefix subdir --onto FETCH_HEAD --rejoin &&
-        check_equal ''"$(last_commit_message)"'' "Split '"'"'subdir/'"'"' into commit '"'"'"$spl1"'"'"'"
-'
-
-test_expect_success 'add main-sub8' '
-        create subdir/main-sub8 &&
-        git commit -m "main-sub8"
-'
-
-# To the subproject!
-cd ./subproj
-
-test_expect_success 'merge split into subproj' '
-        git fetch .. spl1 &&
-        git branch spl1 FETCH_HEAD &&
-        git merge FETCH_HEAD
-'
-
-test_expect_success 'add sub9' '
-        create sub9 &&
-        git commit -m "sub9"
-'
-
-# Back to mainline
-cd ..
-
-test_expect_success 'split for sub8' '
-        split2=''"$(git subtree split --annotate='"'*'"' --prefix subdir/ --rejoin)"''
-        git branch split2 "$split2"
-'
-
-test_expect_success 'add main-sub10' '
-        create subdir/main-sub10 &&
-        git commit -m "main-sub10"
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br &&
+               check_equal "$(git rev-parse subproj-br)" "$split_hash" &&
+               # Check hash of split
+               new_hash=$(git rev-parse subproj-br^2) &&
+               (
+                       cd ./"sub proj" &&
+                       subdir_hash=$(git rev-parse HEAD) &&
+                       check_equal ''"$new_hash"'' "$subdir_hash"
+               )
+       )
+'
+
+next_test
+test_expect_success 'split "sub dir"/ with --branch for an existing branch' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git branch subproj-br FETCH_HEAD &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               split_hash=$(git subtree split --prefix="sub dir" --annotate="*") &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br &&
+               check_equal "$(git rev-parse subproj-br)" "$split_hash"
+       )
+'
+
+next_test
+test_expect_success 'split "sub dir"/ with --branch for an incompatible branch' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git branch init HEAD &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               test_must_fail git subtree split --prefix="sub dir" --branch init
+       )
 '
 
-test_expect_success 'split for sub10' '
-        spl3=''"$(git subtree split --annotate='"'*'"' --prefix subdir --rejoin)"'' &&
-        git branch spl3 "$spl3"
-'
-
-# To the subproject!
-cd ./subproj
-
-test_expect_success 'merge split into subproj' '
-        git fetch .. spl3 &&
-        git branch spl3 FETCH_HEAD &&
-        git merge FETCH_HEAD &&
-        git branch subproj-merge-spl3
-'
-
-chkm="main4 main6"
-chkms="main-sub10 main-sub5 main-sub7 main-sub8"
-chkms_sub=$(echo $chkms | multiline | sed 's,^,subdir/,' | fixnl)
-chks="sub1 sub2 sub3 sub9"
-chks_sub=$(echo $chks | multiline | sed 's,^,subdir/,' | fixnl)
+#
+# Validity checking
+#
 
+next_test
 test_expect_success 'make sure exactly the right set of files ends up in the subproj' '
-        subfiles=''"$(git ls-files | fixnl)"'' &&
-        check_equal "$subfiles" "$chkms $chks"
-'
-
-test_expect_success 'make sure the subproj history *only* contains commits that affect the subdir' '
-        allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' &&
-        check_equal "$allchanges" "$chkms $chks"
-'
-
-# Back to mainline
-cd ..
-
-test_expect_success 'pull from subproj' '
-        git fetch ./subproj subproj-merge-spl3 &&
-        git branch subproj-merge-spl3 FETCH_HEAD &&
-        git subtree pull --prefix=subdir ./subproj subproj-merge-spl3
-'
-
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub3 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD &&
+
+               chks="sub1
+sub2
+sub3
+sub4" &&
+               chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+               chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+               chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+
+               subfiles=$(git ls-files) &&
+               check_equal "$subfiles" "$chkms
+$chks"
+       )
+'
+
+next_test
+test_expect_success 'make sure the subproj *only* contains commits that affect the "sub dir"' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub3 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD &&
+
+               chks="sub1
+sub2
+sub3
+sub4" &&
+               chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+               chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+               chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+               allchanges=$(git log --name-only --pretty=format:"" | sort | sed "/^$/d") &&
+               check_equal "$allchanges" "$chkms
+$chks"
+       )
+'
+
+next_test
 test_expect_success 'make sure exactly the right set of files ends up in the mainline' '
-        mainfiles=''"$(git ls-files | fixnl)"'' &&
-        check_equal "$mainfiles" "$chkm $chkms_sub $chks_sub"
-'
-
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub3 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree pull --prefix="sub dir" ./"sub proj" master &&
+
+               chkm="main1
+main2" &&
+               chks="sub1
+sub2
+sub3
+sub4" &&
+               chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+               chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+               chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+               mainfiles=$(git ls-files) &&
+               check_equal "$mainfiles" "$chkm
+$chkms_sub
+$chks_sub"
+)
+'
+
+next_test
 test_expect_success 'make sure each filename changed exactly once in the entire history' '
-        # main-sub?? and /subdir/main-sub?? both change, because those are the
-        # changes that were split into their own history.  And subdir/sub?? never
-        # change, since they were *only* changed in the subtree branch.
-        allchanges=''"$(git log --name-only --pretty=format:'"''"' | sort | fixnl)"'' &&
-        check_equal "$allchanges" ''"$(echo $chkms $chkm $chks $chkms_sub | multiline | sort | fixnl)"''
-'
-
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git config log.date relative
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub3 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree pull --prefix="sub dir" ./"sub proj" master &&
+
+               chkm="main1
+main2" &&
+               chks="sub1
+sub2
+sub3
+sub4" &&
+               chks_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chks
+TXT
+) &&
+               chkms="main-sub1
+main-sub2
+main-sub3
+main-sub4" &&
+               chkms_sub=$(cat <<TXT | sed '\''s,^,sub dir/,'\''
+$chkms
+TXT
+) &&
+
+               # main-sub?? and /"sub dir"/main-sub?? both change, because those are the
+               # changes that were split into their own history.  And "sub dir"/sub?? never
+               # change, since they were *only* changed in the subtree branch.
+               allchanges=$(git log --name-only --pretty=format:"" | sort | sed "/^$/d") &&
+               expected=''"$(cat <<TXT | sort
+$chkms
+$chkm
+$chks
+$chkms_sub
+TXT
+)"'' &&
+               check_equal "$allchanges" "$expected"
+       )
+'
+
+next_test
 test_expect_success 'make sure the --rejoin commits never make it into subproj' '
-        check_equal ''"$(git log --pretty=format:'"'%s'"' HEAD^2 | grep -i split)"'' ""
-'
-
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub3 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree pull --prefix="sub dir" ./"sub proj" master &&
+               check_equal "$(git log --pretty=format:"%s" HEAD^2 | grep -i split)" ""
+       )
+'
+
+next_test
 test_expect_success 'make sure no "git subtree" tagged commits make it into subproj' '
-        # They are meaningless to subproj since one side of the merge refers to the mainline
-        check_equal ''"$(git log --pretty=format:'"'%s%n%b'"' HEAD^2 | grep "git-subtree.*:")"'' ""
-'
-
-# prepare second pair of repositories
-mkdir test2
-cd test2
-
-test_expect_success 'init main' '
-        test_create_repo main
-'
-
-cd main
-
-test_expect_success 'add main1' '
-        create main1 &&
-        git commit -m "main1"
-'
-
-cd ..
-
-test_expect_success 'init sub' '
-        test_create_repo sub
-'
-
-cd sub
-
-test_expect_success 'add sub2' '
-        create sub2 &&
-        git commit -m "sub2"
-'
-
-cd ../main
-
-# check if split can find proper base without --onto
-
-test_expect_success 'add sub as subdir in main' '
-        git fetch ../sub master &&
-        git branch sub2 FETCH_HEAD &&
-        git subtree add --prefix subdir sub2
-'
-
-cd ../sub
-
-test_expect_success 'add sub3' '
-        create sub3 &&
-        git commit -m "sub3"
-'
-
-cd ../main
-
-test_expect_success 'merge from sub' '
-        git fetch ../sub master &&
-        git branch sub3 FETCH_HEAD &&
-        git subtree merge --prefix subdir sub3
-'
-
-test_expect_success 'add main-sub4' '
-        create subdir/main-sub4 &&
-        git commit -m "main-sub4"
-'
-
-test_expect_success 'split for main-sub4 without --onto' '
-        git subtree split --prefix subdir --branch mainsub4
-'
-
-# at this point, the new commit parent should be sub3 if it is not,
-# something went wrong (the "newparent" of "master~" commit should
-# have been sub3, but it was not, because its cache was not set to
-# itself)
-
-test_expect_success 'check that the commit parent is sub3' '
-        check_equal ''"$(git log --pretty=format:%P -1 mainsub4)"'' ''"$(git rev-parse sub3)"''
-'
-
-test_expect_success 'add main-sub5' '
-        mkdir subdir2 &&
-        create subdir2/main-sub5 &&
-        git commit -m "main-sub5"
-'
-
-test_expect_success 'split for main-sub5 without --onto' '
-        # also test that we still can split out an entirely new subtree
-        # if the parent of the first commit in the tree is not empty,
-       # then the new subtree has accidentally been attached to something
-        git subtree split --prefix subdir2 --branch mainsub5 &&
-        check_equal ''"$(git log --pretty=format:%P -1 mainsub5)"'' ""
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub3 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+                git merge FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub4 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --annotate="*" --branch subproj-br --rejoin
+       ) &&
+       (
+               cd "$subtree_test_count/sub proj" &&
+               git fetch .. subproj-br &&
+               git merge FETCH_HEAD
+       ) &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree pull --prefix="sub dir" ./"sub proj" master &&
+
+               # They are meaningless to subproj since one side of the merge refers to the mainline
+               check_equal "$(git log --pretty=format:"%s%n%b" HEAD^2 | grep "git-subtree.*:")" ""
+       )
 '
 
-# make sure no patch changes more than one file.  The original set of commits
-# changed only one file each.  A multi-file change would imply that we pruned
-# commits too aggressively.
-joincommits()
-{
-       commit=
-       all=
-       while read x y; do
-               #echo "{$x}" >&2
-               if [ -z "$x" ]; then
-                       continue
-               elif [ "$x" = "commit:" ]; then
-                       if [ -n "$commit" ]; then
-                               echo "$commit $all"
-                               all=
-                       fi
-                       commit="$y"
-               else
-                       all="$all $y"
-               fi
-       done
-       echo "$commit $all"
-}
+#
+# A new set of tests
+#
 
+next_test
+test_expect_success 'make sure "git subtree split" find the correct parent' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git branch subproj-ref FETCH_HEAD &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --branch subproj-br &&
+
+               # at this point, the new commit parent should be subproj-ref, if it is
+               # not, something went wrong (the "newparent" of "master~" commit should
+               # have been sub2, but it was not, because its cache was not set to
+               # itself)
+               check_equal "$(git log --pretty=format:%P -1 subproj-br)" "$(git rev-parse subproj-ref)"
+       )
+'
+
+next_test
+test_expect_success 'split a new subtree without --onto option' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --branch subproj-br
+       ) &&
+       mkdir "$subtree_test_count"/"sub dir2" &&
+       test_create_commit "$subtree_test_count" "sub dir2"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+
+               # also test that we still can split out an entirely new subtree
+               # if the parent of the first commit in the tree is not empty,
+               # then the new subtree has accidently been attached to something
+               git subtree split --prefix="sub dir2" --branch subproj2-br &&
+               check_equal "$(git log --pretty=format:%P -1 subproj2-br)" ""
+       )
+'
+
+next_test
 test_expect_success 'verify one file change per commit' '
-        x= &&
-        list=''"$(git log --pretty=format:'"'commit: %H'"' | joincommits)"'' &&
-#        test_debug "echo HERE" &&
-#        test_debug "echo ''"$list"''" &&
-        (git log --pretty=format:'"'commit: %H'"' | joincommits |
-        (       while read commit a b; do
-                       test_debug "echo Verifying commit "''"$commit"''
-                       test_debug "echo a: "''"$a"''
-                       test_debug "echo b: "''"$b"''
-                       check_equal "$b" ""
-                       x=1
-               done
-               check_equal "$x" 1
-        ))
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git branch sub1 FETCH_HEAD &&
+               git subtree add --prefix="sub dir" sub1
+       ) &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir" --branch subproj-br
+       ) &&
+       mkdir "$subtree_test_count"/"sub dir2" &&
+       test_create_commit "$subtree_test_count" "sub dir2"/main-sub2 &&
+       (
+               cd "$subtree_test_count" &&
+               git subtree split --prefix="sub dir2" --branch subproj2-br &&
+
+               x= &&
+               git log --pretty=format:"commit: %H" | join_commits |
+               (
+                       while read commit a b; do
+                               test_debug "echo Verifying commit $commit"
+                               test_debug "echo a: $a"
+                               test_debug "echo b: $b"
+                               check_equal "$b" ""
+                               x=1
+                       done
+                       check_equal "$x" 1
+               )
+       )
+'
+
+next_test
+test_expect_success 'push split to subproj' '
+       subtree_test_create_repo "$subtree_test_count" &&
+       subtree_test_create_repo "$subtree_test_count/sub proj" &&
+       test_create_commit "$subtree_test_count" main1 &&
+       test_create_commit "$subtree_test_count/sub proj" sub1 &&
+       (
+               cd "$subtree_test_count" &&
+               git fetch ./"sub proj" master &&
+               git subtree add --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub1 &&
+       test_create_commit "$subtree_test_count" main2 &&
+       test_create_commit "$subtree_test_count/sub proj" sub2 &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub2 &&
+       (
+               cd $subtree_test_count/"sub proj" &&
+                git branch sub-branch-1 &&
+                cd .. &&
+               git fetch ./"sub proj" master &&
+               git subtree merge --prefix="sub dir" FETCH_HEAD
+       ) &&
+       test_create_commit "$subtree_test_count" "sub dir"/main-sub3 &&
+        (
+               cd "$subtree_test_count" &&
+               git subtree push ./"sub proj" --prefix "sub dir" sub-branch-1 &&
+                cd ./"sub proj" &&
+                git checkout sub-branch-1 &&
+               check_equal "$(last_commit_message)" "sub dir/main-sub3"
+       )
 '
 
 test_done