use Term::ReadLine;
use Getopt::Long;
use Data::Dumper;
+use Git;
package FakeTerm;
sub new {
}
package main;
+
+sub usage {
+ print <<EOT;
+git-send-email [options] <file | directory>...
+Options:
+ --from Specify the "From:" line of the email to be sent.
+
+ --to Specify the primary "To:" line of the email.
+
+ --cc Specify an initial "Cc:" list for the entire series
+ of emails.
+
+ --bcc Specify a list of email addresses that should be Bcc:
+ on all the emails.
+
+ --compose Use \$EDITOR to edit an introductory message for the
+ patch series.
+
+ --subject Specify the initial "Subject:" line.
+ Only necessary if --compose is also set. If --compose
+ is not set, this will be prompted for.
+
+ --in-reply-to Specify the first "In-Reply-To:" header line.
+ Only used if --compose is also set. If --compose is not
+ set, this will be prompted for.
+
+ --chain-reply-to If set, the replies will all be to the previous
+ email sent, rather than to the first email sent.
+ Defaults to on.
+
+ --no-signed-off-cc Suppress the automatic addition of email addresses
+ that appear in Signed-off-by: or Cc: lines to the cc:
+ list. Note: Using this option is not recommended.
+
+ --smtp-server If set, specifies the outgoing SMTP server to use.
+ Defaults to localhost.
+
+ --suppress-from Suppress sending emails to yourself if your address
+ appears in a From: line.
+
+ --quiet Make git-send-email less verbose. One line per email
+ should be all that is output.
+
+EOT
+ exit(1);
+}
+
# most mail servers generate the Date: header, but not all...
sub format_2822_time {
my ($time) = @_;
my $compose_filename = ".msg.$$";
# Variables we fill in automatically, or via prompting:
-my (@to,@cc,@initial_cc,@bcclist,
+my (@to,@cc,@initial_cc,@bcclist,@xh,
$initial_reply_to,$initial_subject,@files,$from,$compose,$time);
# Behavior modification variables
-my ($chain_reply_to, $quiet, $suppress_from, $no_signed_off_cc) = (1, 0, 0, 0);
+my ($chain_reply_to, $quiet, $suppress_from, $no_signed_off_cc,
+ $dry_run) = (1, 0, 0, 0, 0);
my $smtp_server;
# Example reply to:
#$initial_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
+my $repo = Git->repository();
my $term = eval {
new Term::ReadLine 'git-send-email';
};
$term = new FakeTerm "$@: going non-interactive";
}
+my $def_chain = $repo->config_boolean('sendemail.chainreplyto');
+if ($def_chain and $def_chain eq 'false') {
+ $chain_reply_to = 0;
+}
+
+@bcclist = $repo->config('sendemail.bcc');
+if (!@bcclist or !$bcclist[0]) {
+ @bcclist = ();
+}
+
# Begin by accumulating all the variables (defined above), that we will end up
# needing, first, from the command line:
"quiet" => \$quiet,
"suppress-from" => \$suppress_from,
"no-signed-off-cc|no-signed-off-by-cc" => \$no_signed_off_cc,
+ "dry-run" => \$dry_run,
);
+unless ($rc) {
+ usage();
+}
+
# Verify the user input
foreach my $entry (@to) {
# Now, let's fill any that aren't set in with defaults:
-sub gitvar {
- my ($var) = @_;
- my $fh;
- my $pid = open($fh, '-|');
- die "$!" unless defined $pid;
- if (!$pid) {
- exec('git-var', $var) or die "$!";
- }
- my ($val) = <$fh>;
- close $fh or die "$!";
- chomp($val);
- return $val;
-}
-
-sub gitvar_ident {
- my ($name) = @_;
- my $val = gitvar($name);
- my @field = split(/\s+/, $val);
- return join(' ', @field[0...(@field-3)]);
-}
-
-my ($author) = gitvar_ident('GIT_AUTHOR_IDENT');
-my ($committer) = gitvar_ident('GIT_COMMITTER_IDENT');
+my ($author) = $repo->ident_person('author');
+my ($committer) = $repo->ident_person('committer');
my %aliases;
-chomp(my @alias_files = `git-repo-config --get-all sendemail.aliasesfile`);
-chomp(my $aliasfiletype = `git-repo-config sendemail.aliasfiletype`);
+my @alias_files = $repo->config('sendemail.aliasesfile');
+my $aliasfiletype = $repo->config('sendemail.aliasfiletype');
my %parse_alias = (
# multiline formats can be supported in the future
mutt => sub { my $fh = shift; while (<$fh>) {
}}}
);
-if (@alias_files && defined $parse_alias{$aliasfiletype}) {
+if (@alias_files and $aliasfiletype and defined $parse_alias{$aliasfiletype}) {
foreach my $file (@alias_files) {
open my $fh, '<', $file or die "opening $file: $!\n";
$parse_alias{$aliasfiletype}->($fh);
if (!defined $from) {
$from = $author || $committer;
do {
- $_ = $term->readline("Who should the emails appear to be from? ",
- $from);
+ $_ = $term->readline("Who should the emails appear to be from? [$from] ");
} while (!defined $_);
- $from = $_;
+ $from = $_ if ($_);
print "Emails will be sent from: ", $from, "\n";
$prompting++;
}
$initial_reply_to =~ s/(^\s+|\s+$)//g;
}
+if (!$smtp_server) {
+ $smtp_server = $repo->config('sendemail.smtpserver');
+}
if (!$smtp_server) {
foreach (qw( /usr/sbin/sendmail /usr/lib/sendmail )) {
if (-x $_) {
print $_,"\n" for (@files);
}
} else {
- print <<EOT;
-git-send-email [options] <file | directory> [... file | directory ]
-Options:
- --from Specify the "From:" line of the email to be sent.
-
- --to Specify the primary "To:" line of the email.
-
- --cc Specify an initial "Cc:" list for the entire series
- of emails.
-
- --bcc Specify a list of email addresses that should be Bcc:
- on all the emails.
-
- --compose Use \$EDITOR to edit an introductory message for the
- patch series.
-
- --subject Specify the initial "Subject:" line.
- Only necessary if --compose is also set. If --compose
- is not set, this will be prompted for.
-
- --in-reply-to Specify the first "In-Reply-To:" header line.
- Only used if --compose is also set. If --compose is not
- set, this will be prompted for.
-
- --chain-reply-to If set, the replies will all be to the previous
- email sent, rather than to the first email sent.
- Defaults to on.
-
- --no-signed-off-cc Suppress the automatic addition of email addresses
- that appear in a Signed-off-by: line, to the cc: list.
- Note: Using this option is not recommended.
-
- --smtp-server If set, specifies the outgoing SMTP server to use.
- Defaults to localhost.
-
- --suppress-from Suppress sending emails to yourself if your address
- appears in a From: line.
-
- --quiet Make git-send-email less verbose. One line per email should be
- all that is output.
-
-Error: Please specify a file or a directory on the command line.
-EOT
- exit(1);
+ print STDERR "\nNo patch files specified!\n\n";
+ usage();
}
# Variables we set as part of the loop over files
$cc = "";
$time = time - scalar $#files;
+sub unquote_rfc2047 {
+ local ($_) = @_;
+ if (s/=\?utf-8\?q\?(.*)\?=/$1/g) {
+ s/_/ /g;
+ s/=([0-9A-F]{2})/chr(hex($1))/eg;
+ }
+ return "$_";
+}
+
sub send_message
{
my @recipients = unique_email_list(@to);
my $date = format_2822_time($time++);
my $gitversion = '@@GIT_VERSION@@';
if ($gitversion =~ m/..GIT_VERSION../) {
- $gitversion = `git --version`;
- chomp $gitversion;
- # keep only what's after the last space
- $gitversion =~ s/^.* //;
+ $gitversion = Git::version();
}
+ my ($author_name) = ($from =~ /^(.*?)\s+</);
+ if ($author_name && $author_name =~ /\./ && $author_name !~ /^".*"$/) {
+ my ($name, $addr) = ($from =~ /^(.*?)(\s+<.*)/);
+ $from = "\"$name\"$addr";
+ }
my $header = "From: $from
To: $to
Cc: $cc
$header .= "In-Reply-To: $reply_to\n";
$header .= "References: $references\n";
}
+ if (@xh) {
+ $header .= join("\n", @xh) . "\n";
+ }
- if ($smtp_server =~ m#^/#) {
+ if ($dry_run) {
+ # We don't want to send the email.
+ } elsif ($smtp_server =~ m#^/#) {
my $pid = open my $sm, '|-';
defined $pid or die $!;
if (!$pid) {
my $author_not_sender = undef;
@cc = @initial_cc;
- my $found_mbox = 0;
+ @xh = ();
+ my $input_format = undef;
my $header_done = 0;
$message = "";
while(<F>) {
if (!$header_done) {
- $found_mbox = 1, next if (/^From /);
+ if (/^From /) {
+ $input_format = 'mbox';
+ next;
+ }
chomp;
+ if (!defined $input_format && /^[-A-Za-z]+:\s/) {
+ $input_format = 'mbox';
+ }
- if ($found_mbox) {
+ if (defined $input_format && $input_format eq 'mbox') {
if (/^Subject:\s+(.*)$/) {
$subject = $1;
$2, $_) unless $quiet;
push @cc, $2;
}
+ elsif (!/^Date:\s/ && /^[-A-Za-z]+:\s+\S/) {
+ push @xh, $_;
+ }
} else {
# In the traditional
# line 1 = cc
# line 2 = subject
# So let's support that, too.
+ $input_format = 'lots';
if (@cc == 0) {
printf("(non-mbox) Adding cc: %s from line '%s'\n",
$_, $_) unless $quiet;
}
} else {
$message .= $_;
- if (/^Signed-off-by: (.*)$/i && !$no_signed_off_cc) {
- my $c = $1;
+ if (/^(Signed-off-by|Cc): (.*)$/i && !$no_signed_off_cc) {
+ my $c = $2;
chomp $c;
push @cc, $c;
printf("(sob) Adding cc: %s from line '%s'\n",
}
close F;
if (defined $author_not_sender) {
+ $author_not_sender = unquote_rfc2047($author_not_sender);
$message = "From: $author_not_sender\n\n$message";
}
send_message();
# set up for the next message
- if ($chain_reply_to || length($reply_to) == 0) {
+ if ($chain_reply_to || !defined $reply_to || length($reply_to) == 0) {
$reply_to = $message_id;
if (length $references > 0) {
- $references .= " $message_id";
+ $references .= "\n $message_id";
} else {
$references = "$message_id";
}