my $lastrev = <$fh>; chomp $lastrev;
$repo->command_close_pipe($fh, $c);
- my $lastrev = $repo->command_oneline('rev-list', '--all');
+ my $lastrev = $repo->command_oneline( [ 'rev-list', '--all' ],
+ STDERR => 0 );
=cut
the generic command interface.
While some commands can be executed outside of any context (e.g. 'version'
-or 'init-db'), most operations require a repository context, which in practice
+or 'init'), most operations require a repository context, which in practice
means getting an instance of the Git object using the repository() constructor.
(In the future, we will also get a new_repository() constructor.) All commands
called as methods of the object are then executed in the context of the
repository.
-TODO: In the future, we might also do
+Part of the "repository state" is also information about path to the attached
+working copy (unless you work with a bare repository). You can also navigate
+inside of the working copy using the C<wc_chdir()> method. (Note that
+the repository object is self-contained and will not change working directory
+of your process.)
- my $subdir = $repo->subdir('Documentation');
- # Gets called in the subdirectory context:
- $subdir->command('status');
+TODO: In the future, we might also do
my $remoterepo = $repo->remote_repository (Name => 'cogito', Branch => 'master');
$remoterepo ||= Git->remote_repository ('http://git.or.cz/cogito.git/');
my @refs = $remoterepo->refs();
-So far, all functions just die if anything goes wrong. If you don't want that,
-make appropriate provisions to catch the possible deaths. Better error recovery
-mechanisms will be provided in the future.
-
Currently, the module merely wraps calls to external Git tools. In the future,
it will provide a much faster way to interact with Git by linking directly
to libgit. This should be completely opaque to the user, though (performance
use Carp qw(carp croak); # but croak is bad - throw instead
use Error qw(:try);
-
-require XSLoader;
-XSLoader::load('Git', $VERSION);
+use Cwd qw(abs_path);
}
B<WorkingCopy> - Path to the associated working copy; not strictly required
as many commands will happily crunch on a bare repository.
-B<Directory> - Path to the Git working directory in its usual setup. This
-is just for convenient setting of both C<Repository> and C<WorkingCopy>
-at once: If the directory as a C<.git> subdirectory, C<Repository> is pointed
-to the subdirectory and the directory is assumed to be the working copy.
-If the directory does not have the subdirectory, C<WorkingCopy> is left
-undefined and C<Repository> is pointed to the directory itself.
+B<WorkingSubdir> - Subdirectory in the working copy to work inside.
+Just left undefined if you do not want to limit the scope of operations.
+
+B<Directory> - Path to the Git working directory in its usual setup.
+The C<.git> directory is searched in the directory and all the parent
+directories; if found, C<WorkingCopy> is set to the directory containing
+it and C<Repository> to the C<.git> directory itself. If no C<.git>
+directory was found, the C<Directory> is assumed to be a bare repository,
+C<Repository> is set to point at it and C<WorkingCopy> is left undefined.
+If the C<$GIT_DIR> environment variable is set, things behave as expected
+as well.
You should not use both C<Directory> and either of C<Repository> and
C<WorkingCopy> - the results of that are undefined.
field.
Calling the constructor with no options whatsoever is equivalent to
-calling it with C<< Directory => '.' >>.
+calling it with C<< Directory => '.' >>. In general, if you are building
+a standard porcelain command, simply doing C<< Git->repository() >> should
+do the right thing and setup the object to reflect exactly where the user
+is right now.
=cut
} else {
%opts = @args;
}
+ }
- if ($opts{Directory}) {
- -d $opts{Directory} or throw Error::Simple("Directory not found: $!");
- if (-d $opts{Directory}."/.git") {
- # TODO: Might make this more clever
- $opts{WorkingCopy} = $opts{Directory};
- $opts{Repository} = $opts{Directory}."/.git";
- } else {
- $opts{Repository} = $opts{Directory};
+ if (not defined $opts{Repository} and not defined $opts{WorkingCopy}) {
+ $opts{Directory} ||= '.';
+ }
+
+ if ($opts{Directory}) {
+ -d $opts{Directory} or throw Error::Simple("Directory not found: $!");
+
+ my $search = Git->repository(WorkingCopy => $opts{Directory});
+ my $dir;
+ try {
+ $dir = $search->command_oneline(['rev-parse', '--git-dir'],
+ STDERR => 0);
+ } catch Git::Error::Command with {
+ $dir = undef;
+ };
+
+ if ($dir) {
+ $dir =~ m#^/# or $dir = $opts{Directory} . '/' . $dir;
+ $opts{Repository} = $dir;
+
+ # If --git-dir went ok, this shouldn't die either.
+ my $prefix = $search->command_oneline('rev-parse', '--show-prefix');
+ $dir = abs_path($opts{Directory}) . '/';
+ if ($prefix) {
+ if (substr($dir, -length($prefix)) ne $prefix) {
+ throw Error::Simple("rev-parse confused me - $dir does not have trailing $prefix");
+ }
+ substr($dir, -length($prefix)) = '';
+ }
+ $opts{WorkingCopy} = $dir;
+ $opts{WorkingSubdir} = $prefix;
+
+ } else {
+ # A bare repository? Let's see...
+ $dir = $opts{Directory};
+
+ unless (-d "$dir/refs" and -d "$dir/objects" and -e "$dir/HEAD") {
+ # Mimick git-rev-parse --git-dir error message:
+ throw Error::Simple('fatal: Not a git repository');
+ }
+ my $search = Git->repository(Repository => $dir);
+ try {
+ $search->command('symbolic-ref', 'HEAD');
+ } catch Git::Error::Command with {
+ # Mimick git-rev-parse --git-dir error message:
+ throw Error::Simple('fatal: Not a git repository');
}
- delete $opts{Directory};
+
+ $opts{Repository} = abs_path($dir);
}
+
+ delete $opts{Directory};
}
$self = { opts => \%opts };
=item command ( COMMAND [, ARGUMENTS... ] )
+=item command ( [ COMMAND, ARGUMENTS... ], { Opt => Val ... } )
+
Execute the given Git C<COMMAND> (specify it without the 'git-'
prefix), optionally with the specified extra C<ARGUMENTS>.
+The second more elaborate form can be used if you want to further adjust
+the command execution. Currently, only one option is supported:
+
+B<STDERR> - How to deal with the command's error output. By default (C<undef>)
+it is delivered to the caller's C<STDERR>. A false value (0 or '') will cause
+it to be thrown away. If you want to process it, you can get it in a filehandle
+you specify, but you must be extremely careful; if the error output is not
+very short and you want to read it in the same process as where you called
+C<command()>, you are set up for a nice deadlock!
+
The method can be called without any instance or on a specified Git repository
(in that case the command will be run in the repository context).
} else {
my @lines = <$fh>;
- chomp @lines;
+ defined and chomp for @lines;
try {
_cmd_close($fh, $ctx);
} catch Git::Error::Command with {
=item command_oneline ( COMMAND [, ARGUMENTS... ] )
+=item command_oneline ( [ COMMAND, ARGUMENTS... ], { Opt => Val ... } )
+
Execute the given C<COMMAND> in the same way as command()
does but always return a scalar string containing the first line
of the command's standard output.
my ($fh, $ctx) = command_output_pipe(@_);
my $line = <$fh>;
- chomp $line;
+ defined $line and chomp $line;
try {
_cmd_close($fh, $ctx);
} catch Git::Error::Command with {
=item command_output_pipe ( COMMAND [, ARGUMENTS... ] )
+=item command_output_pipe ( [ COMMAND, ARGUMENTS... ], { Opt => Val ... } )
+
Execute the given C<COMMAND> in the same way as command()
does but return a pipe filehandle from which the command output can be
read.
=item command_input_pipe ( COMMAND [, ARGUMENTS... ] )
+=item command_input_pipe ( [ COMMAND, ARGUMENTS... ], { Opt => Val ... } )
+
Execute the given C<COMMAND> in the same way as command_output_pipe()
does but return an input pipe filehandle instead; the command output
is not captured.
=item command_close_pipe ( PIPE [, CTX ] )
Close the C<PIPE> as returned from C<command_*_pipe()>, checking
-whether the command finished successfuly. The optional C<CTX> argument
+whether the command finished successfully. The optional C<CTX> argument
is required if you want to see the command name in the error message,
and it is the second value returned by C<command_*_pipe()> when
called in array context. The call idiom is:
Return the Git version in use.
-Implementation of this function is very fast; no external command calls
-are involved.
-
=cut
-# Implemented in Git.xs.
+sub version {
+ my $verstr = command_oneline('--version');
+ $verstr =~ s/^git version //;
+ $verstr;
+}
=item exec_path ()
-Return path to the git sub-command executables (the same as
+Return path to the Git sub-command executables (the same as
C<git --exec-path>). Useful mostly only internally.
-Implementation of this function is very fast; no external command calls
-are involved.
+=cut
+
+sub exec_path { command_oneline('--exec-path') }
+
+
+=item repo_path ()
+
+Return path to the git repository. Must be called on a repository instance.
=cut
-# Implemented in Git.xs.
+sub repo_path { $_[0]->{opts}->{Repository} }
-=item hash_object ( FILENAME [, TYPE ] )
+=item wc_path ()
-=item hash_object ( FILEHANDLE [, TYPE ] )
+Return path to the working copy. Must be called on a repository instance.
-Compute the SHA1 object id of the given C<FILENAME> (or data waiting in
-C<FILEHANDLE>) considering it is of the C<TYPE> object type (C<blob>
-(default), C<commit>, C<tree>).
+=cut
+
+sub wc_path { $_[0]->{opts}->{WorkingCopy} }
+
+
+=item wc_subdir ()
+
+Return path to the subdirectory inside of a working copy. Must be called
+on a repository instance.
+
+=cut
-In case of C<FILEHANDLE> passed instead of file name, all the data
-available are read and hashed, and the filehandle is automatically
-closed. The file handle should be freshly opened - if you have already
-read anything from the file handle, the results are undefined (since
-this function works directly with the file descriptor and internal
-PerlIO buffering might have messed things up).
+sub wc_subdir { $_[0]->{opts}->{WorkingSubdir} ||= '' }
+
+
+=item wc_chdir ( SUBDIR )
+
+Change the working copy subdirectory to work within. The C<SUBDIR> is
+relative to the working copy root directory (not the current subdirectory).
+Must be called on a repository instance attached to a working copy
+and the directory must exist.
+
+=cut
+
+sub wc_chdir {
+ my ($self, $subdir) = @_;
+ $self->wc_path()
+ or throw Error::Simple("bare repository");
+
+ -d $self->wc_path().'/'.$subdir
+ or throw Error::Simple("subdir not found: $!");
+ # Of course we will not "hold" the subdirectory so anyone
+ # can delete it now and we will never know. But at least we tried.
+
+ $self->{opts}->{WorkingSubdir} = $subdir;
+}
+
+
+=item config ( VARIABLE )
+
+Retrieve the configuration C<VARIABLE> in the same manner as C<config>
+does. In scalar context requires the variable to be set only one time
+(exception is thrown otherwise), in array context returns allows the
+variable to be set multiple times and returns all the values.
+
+Must be called on a repository instance.
+
+This currently wraps command('config') so it is not so fast.
+
+=cut
+
+sub config {
+ my ($self, $var) = @_;
+ $self->repo_path()
+ or throw Error::Simple("not a repository");
+
+ try {
+ if (wantarray) {
+ return $self->command('config', '--get-all', $var);
+ } else {
+ return $self->command_oneline('config', '--get', $var);
+ }
+ } catch Git::Error::Command with {
+ my $E = shift;
+ if ($E->value() == 1) {
+ # Key not found.
+ return undef;
+ } else {
+ throw $E;
+ }
+ };
+}
+
+
+=item config_bool ( VARIABLE )
+
+Retrieve the bool configuration C<VARIABLE>. The return value
+is usable as a boolean in perl (and C<undef> if it's not defined,
+of course).
+
+Must be called on a repository instance.
+
+This currently wraps command('config') so it is not so fast.
+
+=cut
+
+sub config_bool {
+ my ($self, $var) = @_;
+ $self->repo_path()
+ or throw Error::Simple("not a repository");
+
+ try {
+ my $val = $self->command_oneline('config', '--bool', '--get',
+ $var);
+ return undef unless defined $val;
+ return $val eq 'true';
+ } catch Git::Error::Command with {
+ my $E = shift;
+ if ($E->value() == 1) {
+ # Key not found.
+ return undef;
+ } else {
+ throw $E;
+ }
+ };
+}
+
+=item config_int ( VARIABLE )
+
+Retrieve the integer configuration C<VARIABLE>. The return value
+is simple decimal number. An optional value suffix of 'k', 'm',
+or 'g' in the config file will cause the value to be multiplied
+by 1024, 1048576 (1024^2), or 1073741824 (1024^3) prior to output.
+It would return C<undef> if configuration variable is not defined,
+
+Must be called on a repository instance.
+
+This currently wraps command('config') so it is not so fast.
+
+=cut
+
+sub config_int {
+ my ($self, $var) = @_;
+ $self->repo_path()
+ or throw Error::Simple("not a repository");
+
+ try {
+ return $self->command_oneline('config', '--int', '--get', $var);
+ } catch Git::Error::Command with {
+ my $E = shift;
+ if ($E->value() == 1) {
+ # Key not found.
+ return undef;
+ } else {
+ throw $E;
+ }
+ };
+}
+
+=item get_colorbool ( NAME )
+
+Finds if color should be used for NAMEd operation from the configuration,
+and returns boolean (true for "use color", false for "do not use color").
+
+=cut
+
+sub get_colorbool {
+ my ($self, $var) = @_;
+ my $stdout_to_tty = (-t STDOUT) ? "true" : "false";
+ my $use_color = $self->command_oneline('config', '--get-colorbool',
+ $var, $stdout_to_tty);
+ return ($use_color eq 'true');
+}
+
+=item get_color ( SLOT, COLOR )
+
+Finds color for SLOT from the configuration, while defaulting to COLOR,
+and returns the ANSI color escape sequence:
+
+ print $repo->get_color("color.interactive.prompt", "underline blue white");
+ print "some text";
+ print $repo->get_color("", "normal");
+
+=cut
+
+sub get_color {
+ my ($self, $slot, $default) = @_;
+ my $color = $self->command_oneline('config', '--get-color', $slot, $default);
+ if (!defined $color) {
+ $color = "";
+ }
+ return $color;
+}
+
+=item ident ( TYPE | IDENTSTR )
+
+=item ident_person ( TYPE | IDENTSTR | IDENTARRAY )
+
+This suite of functions retrieves and parses ident information, as stored
+in the commit and tag objects or produced by C<var GIT_type_IDENT> (thus
+C<TYPE> can be either I<author> or I<committer>; case is insignificant).
+
+The C<ident> method retrieves the ident information from C<git-var>
+and either returns it as a scalar string or as an array with the fields parsed.
+Alternatively, it can take a prepared ident string (e.g. from the commit
+object) and just parse it.
+
+C<ident_person> returns the person part of the ident - name and email;
+it can take the same arguments as C<ident> or the array returned by C<ident>.
+
+The synopsis is like:
+
+ my ($name, $email, $time_tz) = ident('author');
+ "$name <$email>" eq ident_person('author');
+ "$name <$email>" eq ident_person($name);
+ $time_tz =~ /^\d+ [+-]\d{4}$/;
+
+Both methods must be called on a repository instance.
+
+=cut
+
+sub ident {
+ my ($self, $type) = @_;
+ my $identstr;
+ if (lc $type eq lc 'committer' or lc $type eq lc 'author') {
+ $identstr = $self->command_oneline('var', 'GIT_'.uc($type).'_IDENT');
+ } else {
+ $identstr = $type;
+ }
+ if (wantarray) {
+ return $identstr =~ /^(.*) <(.*)> (\d+ [+-]\d{4})$/;
+ } else {
+ return $identstr;
+ }
+}
+
+sub ident_person {
+ my ($self, @ident) = @_;
+ $#ident == 0 and @ident = $self->ident($ident[0]);
+ return "$ident[0] <$ident[1]>";
+}
+
+
+=item hash_object ( TYPE, FILENAME )
+
+Compute the SHA1 object id of the given C<FILENAME> (or data waiting in
+C<FILEHANDLE>) considering it is of the C<TYPE> object type (C<blob>,
+C<commit>, C<tree>).
The method can be called without any instance or on a specified Git repository,
it makes zero difference.
The function returns the SHA1 hash.
-Implementation of this function is very fast; no external command calls
-are involved.
-
=cut
-# Implemented in Git.xs.
+# TODO: Support for passing FILEHANDLE instead of FILENAME
+sub hash_object {
+ my ($self, $type, $file) = _maybe_self(@_);
+ command_oneline('hash-object', '-t', $type, $file);
+}
# Common backend for the pipe creators.
sub _command_common_pipe {
my $direction = shift;
- my ($self, $cmd, @args) = _maybe_self(@_);
+ my ($self, @p) = _maybe_self(@_);
+ my (%opts, $cmd, @args);
+ if (ref $p[0]) {
+ ($cmd, @args) = @{shift @p};
+ %opts = ref $p[0] ? %{$p[0]} : @p;
+ } else {
+ ($cmd, @args) = @p;
+ }
_check_valid_cmd($cmd);
- my $pid = open(my $fh, $direction);
- if (not defined $pid) {
- throw Error::Simple("open failed: $!");
- } elsif ($pid == 0) {
- _cmd_exec($self, $cmd, @args);
+ my $fh;
+ if ($^O eq 'MSWin32') {
+ # ActiveState Perl
+ #defined $opts{STDERR} and
+ # warn 'ignoring STDERR option - running w/ ActiveState';
+ $direction eq '-|' or
+ die 'input pipe for ActiveState not implemented';
+ # the strange construction with *ACPIPE is just to
+ # explain the tie below that we want to bind to
+ # a handle class, not scalar. It is not known if
+ # it is something specific to ActiveState Perl or
+ # just a Perl quirk.
+ tie (*ACPIPE, 'Git::activestate_pipe', $cmd, @args);
+ $fh = *ACPIPE;
+
+ } else {
+ my $pid = open($fh, $direction);
+ if (not defined $pid) {
+ throw Error::Simple("open failed: $!");
+ } elsif ($pid == 0) {
+ if (defined $opts{STDERR}) {
+ close STDERR;
+ }
+ if ($opts{STDERR}) {
+ open (STDERR, '>&', $opts{STDERR})
+ or die "dup failed: $!";
+ }
+ _cmd_exec($self, $cmd, @args);
+ }
}
return wantarray ? ($fh, join(' ', $cmd, @args)) : $fh;
}
sub _cmd_exec {
my ($self, @args) = @_;
if ($self) {
- $self->{opts}->{Repository} and $ENV{'GIT_DIR'} = $self->{opts}->{Repository};
- $self->{opts}->{WorkingCopy} and chdir($self->{opts}->{WorkingCopy});
+ $self->repo_path() and $ENV{'GIT_DIR'} = $self->repo_path();
+ $self->wc_path() and chdir($self->wc_path());
+ $self->wc_subdir() and chdir($self->wc_subdir());
}
_execv_git_cmd(@args);
- die "exec failed: $!";
+ die qq[exec "@args" failed: $!];
}
# Execute the given Git command ($_[0]) with arguments ($_[1..])
# by searching for it at proper places.
-# _execv_git_cmd(), implemented in Git.xs.
+sub _execv_git_cmd { exec('git', @_); }
# Close pipe to a subprocess.
sub _cmd_close {
}
-# Trickery for .xs routines: In order to avoid having some horrid
-# C code trying to do stuff with undefs and hashes, we gate all
-# xs calls through the following and in case we are being ran upon
-# an instance call a C part of the gate which will set up the
-# environment properly.
-sub _call_gate {
- my $xsfunc = shift;
- my ($self, @args) = _maybe_self(@_);
+sub DESTROY { }
- if (defined $self) {
- # XXX: We ignore the WorkingCopy! To properly support
- # that will require heavy changes in libgit.
- # XXX: And we ignore everything else as well. libgit
- # at least needs to be extended to let us specify
- # the $GIT_DIR instead of looking it up in environment.
- #xs_call_gate($self->{opts}->{Repository});
- }
+# Pipe implementation for ActiveState Perl.
+
+package Git::activestate_pipe;
+use strict;
+
+sub TIEHANDLE {
+ my ($class, @params) = @_;
+ # FIXME: This is probably horrible idea and the thing will explode
+ # at the moment you give it arguments that require some quoting,
+ # but I have no ActiveState clue... --pasky
+ # Let's just hope ActiveState Perl does at least the quoting
+ # correctly.
+ my @data = qx{git @params};
+ bless { i => 0, data => \@data }, $class;
+}
- # Having to call throw from the C code is a sure path to insanity.
- local $SIG{__DIE__} = sub { throw Error::Simple("@_"); };
- &$xsfunc(@args);
+sub READLINE {
+ my $self = shift;
+ if ($self->{i} >= scalar @{$self->{data}}) {
+ return undef;
+ }
+ my $i = $self->{i};
+ if (wantarray) {
+ $self->{i} = $#{$self->{'data'}} + 1;
+ return splice(@{$self->{'data'}}, $i);
+ }
+ $self->{i} = $i + 1;
+ return $self->{'data'}->[ $i ];
}
-sub AUTOLOAD {
- my $xsname;
- our $AUTOLOAD;
- ($xsname = $AUTOLOAD) =~ s/.*:://;
- throw Error::Simple("&Git::$xsname not defined") if $xsname =~ /^xs_/;
- $xsname = 'xs_'.$xsname;
- _call_gate(\&$xsname, @_);
+sub CLOSE {
+ my $self = shift;
+ delete $self->{data};
+ delete $self->{i};
}
-sub DESTROY { }
+sub EOF {
+ my $self = shift;
+ return ($self->{i} >= scalar @{$self->{data}});
+}
1; # Famous last words