cd branch1 &&
p4 edit file2 &&
echo file2_ >>file2 &&
- p4 submit -d "update file2 in branch3" &&
+ p4 submit -d "update file2 in branch1" &&
cd "$git" &&
git reset --hard p4/depot/branch1 &&
git p4 rebase &&
# `- file2
# `- file3
test_expect_success 'git p4 add complex branches' '
- test_when_finished cleanup_git &&
- test_create_repo "$git" &&
(
cd "$cli" &&
changelist=$(p4 changes -m1 //depot/... | cut -d" " -f2) &&
)
'
+# Move branch3/file3 to branch4/file3 in a single changelist
+test_expect_success 'git p4 submit to two branches in a single changelist' '
+ (
+ cd "$cli" &&
+ p4 integrate //depot/branch3/file3 //depot/branch4/file3 &&
+ p4 delete //depot/branch3/file3 &&
+ p4 submit -d "Move branch3/file3 to branch4/file3"
+ )
+'
+
+# Confirm that changes to two branches done in a single changelist
+# are correctly imported by git p4
+test_expect_success 'git p4 sync changes to two branches in the same changelist' '
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git config git-p4.branchList branch1:branch2 &&
+ git config --add git-p4.branchList branch1:branch3 &&
+ git config --add git-p4.branchList branch1:branch4 &&
+ git config --add git-p4.branchList branch1:branch5 &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
+ git log --all --graph --decorate --stat &&
+ git reset --hard p4/depot/branch1 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch2 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch3 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch4 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch5 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ test_path_is_missing .git/git-p4-tmp
+ )
+'
+
+# Create a branch by integrating a single file
+test_expect_success 'git p4 file subset branch' '
+ (
+ cd "$cli" &&
+ p4 integrate //depot/branch1/file1 //depot/branch6/file1 &&
+ p4 submit -d "Integrate file1 alone from branch1 to branch6"
+ )
+'
+
+# Check if git p4 creates a new branch containing a single file,
+# instead of keeping the old files from the original branch
+test_expect_failure 'git p4 clone file subset branch' '
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git config git-p4.branchList branch1:branch2 &&
+ git config --add git-p4.branchList branch1:branch3 &&
+ git config --add git-p4.branchList branch1:branch4 &&
+ git config --add git-p4.branchList branch1:branch5 &&
+ git config --add git-p4.branchList branch1:branch6 &&
+ git p4 clone --dest=. --detect-branches //depot@all &&
+ git log --all --graph --decorate --stat &&
+ git reset --hard p4/depot/branch1 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch2 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch3 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_missing file3 &&
+ grep update file2 &&
+ git reset --hard p4/depot/branch4 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch5 &&
+ test_path_is_file file1 &&
+ test_path_is_file file2 &&
+ test_path_is_file file3 &&
+ ! grep update file2 &&
+ git reset --hard p4/depot/branch6 &&
+ test_path_is_file file1 &&
+ test_path_is_missing file2 &&
+ test_path_is_missing file3
+ )
+'
+
+# From a report in http://stackoverflow.com/questions/11893688
+# where --use-client-spec caused branch prefixes not to be removed;
+# every file in git appeared into a subdirectory of the branch name.
+test_expect_success 'use-client-spec detect-branches setup' '
+ rm -rf "$cli" &&
+ mkdir "$cli" &&
+ (
+ cd "$cli" &&
+ client_view "//depot/usecs/... //client/..." &&
+ mkdir b1 &&
+ echo b1/b1-file1 >b1/b1-file1 &&
+ p4 add b1/b1-file1 &&
+ p4 submit -d "b1/b1-file1" &&
+
+ p4 integrate //depot/usecs/b1/... //depot/usecs/b2/... &&
+ p4 submit -d "b1 -> b2" &&
+ p4 branch -i <<-EOF &&
+ Branch: b2
+ View: //depot/usecs/b1/... //depot/usecs/b2/...
+ EOF
+
+ echo b2/b2-file2 >b2/b2-file2 &&
+ p4 add b2/b2-file2 &&
+ p4 submit -d "b2/b2-file2"
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches files in top-level' '
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git p4 sync --detect-branches --use-client-spec //depot/usecs@all &&
+ git checkout -b master p4/usecs/b1 &&
+ test_path_is_file b1-file1 &&
+ test_path_is_missing b2-file2 &&
+ test_path_is_missing b1 &&
+ test_path_is_missing b2 &&
+
+ git checkout -b b2 p4/usecs/b2 &&
+ test_path_is_file b1-file1 &&
+ test_path_is_file b2-file2 &&
+ test_path_is_missing b1 &&
+ test_path_is_missing b2
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches skips branches setup' '
+ (
+ cd "$cli" &&
+
+ p4 integrate //depot/usecs/b1/... //depot/usecs/b3/... &&
+ p4 submit -d "b1 -> b3" &&
+ p4 branch -i <<-EOF &&
+ Branch: b3
+ View: //depot/usecs/b1/... //depot/usecs/b3/...
+ EOF
+
+ echo b3/b3-file3 >b3/b3-file3 &&
+ p4 add b3/b3-file3 &&
+ p4 submit -d "b3/b3-file3"
+ )
+'
+
+test_expect_success 'use-client-spec detect-branches skips branches' '
+ client_view "//depot/usecs/... //client/..." \
+ "-//depot/usecs/b3/... //client/b3/..." &&
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git p4 sync --detect-branches --use-client-spec //depot/usecs@all &&
+ test_must_fail git rev-parse refs/remotes/p4/usecs/b3
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'