Everybody uses these commands to maintain git repositories.
- * gitlink:git-init-db[1] or gitlink:git-clone[1] to create a
+ * gitlink:git-init[1] or gitlink:git-clone[1] to create a
new repository.
* gitlink:git-fsck-objects[1] to check the repository for errors.
* gitlink:git-repack[1] to pack loose objects for efficiency.
+ * gitlink:git-gc[1] to do common housekeeping tasks such as
+ repack and prune.
+
Examples
~~~~~~~~
+
------------
$ git fsck-objects <1>
-$ git prune
$ git count-objects <2>
$ git repack <3>
-$ git prune <4>
+$ git gc <4>
------------
+
-<1> running without "--full" is usually cheap and assures the
+<1> running without `\--full` is usually cheap and assures the
repository health reasonably well.
<2> check how many loose objects there are and how much
disk space is wasted by not repacking.
-<3> without "-a" repacks incrementally. repacking every 4-5MB
+<3> without `-a` repacks incrementally. repacking every 4-5MB
of loose objects accumulation may be a good rule of thumb.
-<4> after repack, prune removes the duplicate loose objects.
+<4> it is easier to use `git gc` than individual housekeeping commands
+such as `prune` and `repack`. This runs `repack -a -d`.
Repack a small project into single pack.::
+
* gitlink:git-checkout[1] and gitlink:git-branch[1] to switch
branches.
- * gitlink:git-add[1] and gitlink:git-update-index[1] to manage
- the index file.
+ * gitlink:git-add[1] to manage the index file.
* gitlink:git-diff[1] and gitlink:git-status[1] to see what
you are in the middle of doing.
* gitlink:git-reset[1] and gitlink:git-checkout[1] (with
pathname parameters) to undo changes.
- * gitlink:git-pull[1] with "." as the remote to merge between
- local branches.
+ * gitlink:git-merge[1] to merge between local branches.
* gitlink:git-rebase[1] to maintain topic branches.
Examples
~~~~~~~~
-Use a tarball as a starting point for a new repository:
+Use a tarball as a starting point for a new repository.::
+
------------
$ tar zxf frotz.tar.gz
$ cd frotz
-$ git-init-db
+$ git-init
$ git add . <1>
$ git commit -m 'import of frotz source tree.'
$ git tag v2.43 <2>
$ git checkout -- curses/ux_audio_oss.c <2>
$ git add curses/ux_audio_alsa.c <3>
$ edit/compile/test
-$ git diff <4>
+$ git diff HEAD <4>
$ git commit -a -s <5>
$ edit/compile/test
$ git reset --soft HEAD^ <6>
$ git diff ORIG_HEAD <7>
$ git commit -a -c ORIG_HEAD <8>
$ git checkout master <9>
-$ git pull . alsa-audio <10>
+$ git merge alsa-audio <10>
$ git log --since='3 days ago' <11>
$ git log v2.43.. curses/ <12>
------------
+
<1> create a new topic branch.
-<2> revert your botched changes in "curses/ux_audio_oss.c".
+<2> revert your botched changes in `curses/ux_audio_oss.c`.
<3> you need to tell git if you added a new file; removal and
-modification will be caught if you do "commit -a" later.
+modification will be caught if you do `git commit -a` later.
<4> to see what changes you are committing.
<5> commit everything as you have tested, with your sign-off.
<6> take the last commit back, keeping what is in the working tree.
<8> redo the commit undone in the previous step, using the message
you originally wrote.
<9> switch to the master branch.
-<10> merge a topic branch into your master branch
+<10> merge a topic branch into your master branch.
<11> review commit logs; other forms to limit output can be
-combined and include --max-count=10 (show 10 commits), --until='2005-12-10'.
-<12> view only the changes that touch what's in curses/
-directory, since v2.43 tag.
+combined and include `\--max-count=10` (show 10 commits),
+`\--until=2005-12-10`, etc.
+<12> view only the changes that touch what's in `curses/`
+directory, since `v2.43` tag.
Individual Developer (Participant)[[Individual Developer (Participant)]]
+
<1> repeat as needed.
<2> extract patches from your branch for e-mail submission.
-<3> "pull" fetches from "origin" by default and merges into the
+<3> `git pull` fetches from `origin` by default and merges into the
current branch.
<4> immediately after pulling, look at the changes done upstream
since last time we checked, only in the
<5> fetch from a specific branch from a specific repository and merge.
<6> revert the pull.
<7> garbage collect leftover objects from reverted pull.
-<8> from time to time, obtain official tags from the "origin"
-and store them under .git/refs/tags/.
+<8> from time to time, obtain official tags from the `origin`
+and store them under `.git/refs/tags/`.
Push into another repository.::
+
------------
-satellite$ git clone mothership:frotz/.git frotz <1>
+satellite$ git clone mothership:frotz frotz <1>
satellite$ cd frotz
-satellite$ cat .git/remotes/origin <2>
-URL: mothership:frotz/.git
-Pull: master:origin
-satellite$ echo 'Push: master:satellite' >>.git/remotes/origin <3>
+satellite$ git repo-config --get-regexp '^(remote|branch)\.' <2>
+remote.origin.url mothership:frotz
+remote.origin.fetch refs/heads/*:refs/remotes/origin/*
+branch.master.remote origin
+branch.master.merge refs/heads/master
+satellite$ git repo-config remote.origin.push \
+ master:refs/remotes/satellite/master <3>
satellite$ edit/compile/test/commit
satellite$ git push origin <4>
mothership$ cd frotz
mothership$ git checkout master
-mothership$ git pull . satellite <5>
+mothership$ git merge satellite/master <5>
------------
+
<1> mothership machine has a frotz repository under your home
directory; clone from it to start a repository on the satellite
machine.
-<2> clone creates this file by default. It arranges "git pull"
-to fetch and store the master branch head of mothership machine
-to local "origin" branch.
-<3> arrange "git push" to push local "master" branch to
-"satellite" branch of the mothership machine.
-<4> push will stash our work away on "satellite" branch on the
-mothership machine. You could use this as a back-up method.
+<2> clone sets these configuration variables by default.
+It arranges `git pull` to fetch and store the branches of mothership
+machine to local `remotes/origin/*` tracking branches.
+<3> arrange `git push` to push local `master` branch to
+`remotes/satellite/master` branch of the mothership machine.
+<4> push will stash our work away on `remotes/satellite/master`
+tracking branch on the mothership machine. You could use this as
+a back-up method.
<5> on mothership machine, merge the work done on the satellite
machine into the master branch.
+
<1> create a private branch based on a well known (but somewhat behind)
tag.
-<2> forward port all changes in private2.6.14 branch to master branch
+<2> forward port all changes in `private2.6.14` branch to `master` branch
without a formal "merging".
& s 2 3 4 5 ./+to-apply
& s 7 8 ./+hold-linus
& q
-$ git checkout master
+$ git checkout -b topic/one master
$ git am -3 -i -s -u ./+to-apply <4>
$ compile/test
$ git checkout -b hold/linus && git am -3 -i -s -u ./+hold-linus <5>
$ git checkout topic/one && git rebase master <6>
-$ git checkout pu && git reset --hard master <7>
-$ git pull . topic/one topic/two && git pull . hold/linus <8>
+$ git checkout pu && git reset --hard next <7>
+$ git merge topic/one topic/two && git merge hold/linus <8>
$ git checkout maint
$ git cherry-pick master~4 <9>
$ compile/test
that are not quite ready.
<4> apply them, interactively, with my sign-offs.
<5> create topic branch as needed and apply, again with my
-sign-offs.
+sign-offs.
<6> rebase internal topic branch that has not been merged to the
master, nor exposed as a part of a stable branch.
-<7> restart "pu" every time from the master.
+<7> restart `pu` every time from the next.
<8> and bundle topic branches still cooking.
<9> backport a critical fix.
<10> create a signed tag.
<11> make sure I did not accidentally rewind master beyond what I
-already pushed out. "ko" shorthand points at the repository I have
+already pushed out. `ko` shorthand points at the repository I have
at kernel.org, and looks like this:
+
------------
$ cat .git/remotes/ko
URL: kernel.org:/pub/scm/git/git.git
Pull: master:refs/tags/ko-master
+Pull: next:refs/tags/ko-next
Pull: maint:refs/tags/ko-maint
Push: master
+Push: next
Push: +pu
Push: maint
------------
+
-In the output from "git show-branch", "master" should have
-everything "ko-master" has.
+In the output from `git show-branch`, `master` should have
+everything `ko-master` has, and `next` should have
+everything `ko-next` has.
<12> push out the bleeding edge.
<13> push the tag out, too.
Examples
~~~~~~~~
+We assume the following in /etc/services::
++
+------------
+$ grep 9418 /etc/services
+git 9418/tcp # Git Version Control System
+------------
+
Run git-daemon to serve /pub/scm from inetd.::
+
------------
------------
+
<1> log-in shell is set to /usr/bin/git-shell, which does not
-allow anything but "git push" and "git pull". The users should
+allow anything but `git push` and `git pull`. The users should
get an ssh access to the machine.
<2> in many distributions /etc/shells needs to list what is used
as the login shell.