Date: Mon, 15 Aug 2005 12:17:41 -0700
From: tony.luck@intel.com
Subject: Some tutorial text (was git/cogito workshop/bof at linuxconf au?)
+Abstract: In this article, Tony Luck discusses how he uses GIT
+ as a Linux subsystem maintainer.
Here's something that I've been putting together on how I'm using
GIT as a Linux subsystem maintainer.
-I suspect that I'm a bit slap-happy with the "git checkout" commands in
-the examples below, and perhaps missing some of the _true-git_ ways of
-doing things.
-
-Tony
+Last updated w.r.t. GIT 0.99.9f
+
Linux subsystem maintenance using GIT
-------------------------------------
patches blocked in the test tree waiting for complex changes to accumulate
enough test time to graduate.
-Back in the BitKeeper days I achieved this my creating small forests of
+Back in the BitKeeper days I achieved this by creating small forests of
temporary trees, one tree for each logical grouping of patches, and then
pulling changes from these trees first to the test tree, and then to the
release tree. At first I replicated this in GIT, but then I realised
First create your work tree by cloning Linus's public tree:
- $ git clone rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git work
+ $ git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git work
Change directory into the cloned tree you just created
$ cd work
-Make a GIT branch named "linus", and rename the "origin" branch as linus too:
+Set up a remotes file so that you can fetch the latest from Linus' master
+branch into a local branch named "linus":
+
+ $ cat > .git/remotes/linus
+ URL: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ Pull: master:linus
+ ^D
- $ git checkout -b linus
- $ mv .git/branches/origin .git/branches/linus
+and create the linus branch:
+
+ $ git branch linus
The "linus" branch will be used to track the upstream kernel. To update it,
you simply run:
- $ git checkout linus && git pull linus
+ $ git fetch linus
+
+you can do this frequently (and it should be safe to do so with pending
+work in your tree, but perhaps not if you are in mid-merge).
+
+If you need to keep track of other public trees, you can add remote branches
+for them too:
-you can do this frequently (as long as you don't have any uncommited work
-in your tree).
+ $ git branch another
+ $ cat > .git/remotes/another
+ URL: ... insert URL here ...
+ Pull: name-of-branch-in-this-remote-tree:another
+ ^D
-If you need to keep track of other public trees, you can add branches for
-them too:
+and run:
- $ git checkout -b another linus
- $ echo URL-for-another-public-tree > .git/branches/another
+ $ git fetch another
Now create the branches in which you are going to work, these start
out at the current tip of the linus branch.
- $ git checkout -b test linus
- $ git checkout -b release linus
+ $ git branch test linus
+ $ git branch release linus
These can be easily kept up to date by merging from the "linus" branch:
- $ git checkout test && git resolve test linus "Auto-update from upstream"
- $ git checkout release && git resolve release linus "Auto-update from upstream"
+ $ git checkout test && git merge "Auto-update from upstream" test linus
+ $ git checkout release && git merge "Auto-update from upstream" release linus
-Set up so that you can push upstream to your public tree:
+Set up so that you can push upstream to your public tree (you need to
+log-in to the remote system and create an empty tree there before the
+first push).
- $ echo master.kernel.org:/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6.git > .git/branches/origin
+ $ cat > .git/remotes/mytree
+ URL: master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+ Push: release
+ Push: test
+ ^D
-and then push each of the test and release branches using:
+and the push both the test and release trees using:
- $ git push origin test
-and
- $ git push origin release
+ $ git push mytree
+
+or push just one of the test and release branches using:
+
+ $ git push mytree test
+or
+ $ git push mytree release
Now to apply some patches from the community. Think of a short
snappy name for a branch to hold this patch (or related group of
When you are happy with the state of this change, you can pull it into the
"test" branch in preparation to make it public:
- $ git checkout test && git resolve test speed-up-spinlocks "Pull speed-up-spinlock changes"
+ $ git checkout test && git merge "Pull speed-up-spinlock changes" test speed-up-spinlocks
It is unlikely that you would have any conflicts here ... but you might if you
spent a while on this step and had also pulled new versions from upstream.
see the value of keeping each patch (or patch series) in its own branch. It
means that the patches can be moved into the "release" tree in any order.
- $ git checkout release && git resolve release speed-up-spinlocks "Pull speed-up-spinlock changes"
+ $ git checkout release && git merge "Pull speed-up-spinlock changes" release speed-up-spinlocks
After a while, you will have a number of branches, and despite the
well chosen names you picked for each of them, you may forget what
is empty. At this point the branch can be deleted:
- $ rm .git/refs/heads/branchname
+ $ git branch -d branchname
+
+Some changes are so trivial that it is not necessary to create a separate
+branch and then merge into each of the test and release branches. For
+these changes, just apply directly to the "release" branch, and then
+merge that into the "test" branch.
To create diffstat and shortlog summaries of changes to include in a "please
pull" request to Linus you can use:
and
$ git-whatchanged release ^linus | git-shortlog
+
+Here are some of the scripts that I use to simplify all this even further.
+
+==== update script ====
+# Update a branch in my GIT tree. If the branch to be updated
+# is "linus", then pull from kernel.org. Otherwise merge local
+# linus branch into test|release branch
+
+case "$1" in
+test|release)
+ git checkout $1 && git merge "Auto-update from upstream" $1 linus
+ ;;
+linus)
+ before=$(cat .git/refs/heads/linus)
+ git fetch linus
+ after=$(cat .git/refs/heads/linus)
+ if [ $before != $after ]
+ then
+ git-whatchanged $after ^$before | git-shortlog
+ fi
+ ;;
+*)
+ echo "Usage: $0 linus|test|release" 1>&2
+ exit 1
+ ;;
+esac
+
+==== merge script ====
+# Merge a branch into either the test or release branch
+
+pname=$0
+
+usage()
+{
+ echo "Usage: $pname branch test|release" 1>&2
+ exit 1
+}
+
+if [ ! -f .git/refs/heads/"$1" ]
+then
+ echo "Can't see branch <$1>" 1>&2
+ usage
+fi
+
+case "$2" in
+test|release)
+ if [ $(git-rev-list $1 ^$2 | wc -c) -eq 0 ]
+ then
+ echo $1 already merged into $2 1>&2
+ exit 1
+ fi
+ git checkout $2 && git merge "Pull $1 into $2 branch" $2 $1
+ ;;
+*)
+ usage
+ ;;
+esac
+
+==== status script ====
+# report on status of my ia64 GIT tree
+
+gb=$(tput setab 2)
+rb=$(tput setab 1)
+restore=$(tput setab 9)
+
+if [ `git-rev-list release ^test | wc -c` -gt 0 ]
+then
+ echo $rb Warning: commits in release that are not in test $restore
+ git-whatchanged release ^test
+fi
+
+for branch in `ls .git/refs/heads`
+do
+ if [ $branch = linus -o $branch = test -o $branch = release ]
+ then
+ continue
+ fi
+
+ echo -n $gb ======= $branch ====== $restore " "
+ status=
+ for ref in test release linus
+ do
+ if [ `git-rev-list $branch ^$ref | wc -c` -gt 0 ]
+ then
+ status=$status${ref:0:1}
+ fi
+ done
+ case $status in
+ trl)
+ echo $rb Need to pull into test $restore
+ ;;
+ rl)
+ echo "In test"
+ ;;
+ l)
+ echo "Waiting for linus"
+ ;;
+ "")
+ echo $rb All done $restore
+ ;;
+ *)
+ echo $rb "<$status>" $restore
+ ;;
+ esac
+ git-whatchanged $branch ^linus | git-shortlog
+done