amWorkDir::
Advice that shows the location of the patch file when
linkgit:git-am[1] fails to apply it.
+ rmHints::
+ In case of failure in the output of linkgit:git-rm[1],
+ show directions on how to proceed from the current state.
--
core.fileMode::
color.interactive::
When set to `always`, always use colors for interactive prompts
- and displays (such as those used by "git-add --interactive").
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ and displays (such as those used by "git-add --interactive" and
+ "git-clean --interactive"). When false (or `never`), never.
+ When set to `true` or `auto`, use colors only when the output is
+ to the terminal. Defaults to false.
color.interactive.<slot>::
- Use customized color for 'git add --interactive'
- output. `<slot>` may be `prompt`, `header`, `help` or `error`, for
- four distinct types of normal output from interactive
- commands. The values of these variables may be specified as
- in color.branch.<slot>.
+ Use customized color for 'git add --interactive' and 'git clean
+ --interactive' output. `<slot>` may be `prompt`, `header`, `help`
+ or `error`, for four distinct types of normal output from
+ interactive commands. The values of these variables may be
+ specified as in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
as `color.diff` and `color.grep` that control the use of color
per command family. Its scope will expand as more commands learn
configuration to set a default for the `--color` option. Set it
- to `always` if you want all output not intended for machine
- consumption to use color, to `true` or `auto` if you want such
- output to use color when written to the terminal, or to `false` or
- `never` if you prefer Git commands not to use color unless enabled
- explicitly with some other configuration or the `--color` option.
+ to `false` or `never` if you prefer Git commands not to use
+ color unless enabled explicitly with some other configuration
+ or the `--color` option. Set it to `always` if you want all
+ output not intended for machine consumption to use color, to
+ `true` or `auto` (this is the default since Git 1.8.4) if you
+ want such output to use color when written to the terminal.
column.ui::
Specify whether supported commands should output in columns.
Specify whether to output branch listing in `git branch` in columns.
See `column.ui` for details.
+column.clean::
+ Specify the layout when list items in `git clean -i`, which always
+ shows files and directories in columns. See `column.ui` for details.
+
column.status::
Specify whether to output untracked files in `git status` in columns.
See `column.ui` for details.
The default merge strategy to use when pulling a single branch.
push.default::
- Defines the action `git push` should take if no refspec is given
- on the command line, no refspec is configured in the remote, and
- no refspec is implied by any of the options given on the command
- line. Possible values are:
+ Defines the action `git push` should take if no refspec is
+ explicitly given. Different values are well-suited for
+ specific workflows; for instance, in a purely central workflow
+ (i.e. the fetch source is equal to the push destination),
+ `upstream` is probably what you want. Possible values are:
+
--
-* `nothing` - do not push anything.
-* `matching` - push all branches having the same name in both ends.
- This is for those who prepare all the branches into a publishable
- shape and then push them out with a single command. It is not
- appropriate for pushing into a repository shared by multiple users,
- since locally stalled branches will attempt a non-fast forward push
- if other users updated the branch.
- +
- This is currently the default, but Git 2.0 will change the default
- to `simple`.
-* `upstream` - push the current branch to its upstream branch
- (`tracking` is a deprecated synonym for this).
- With this, `git push` will update the same remote ref as the one which
- is merged by `git pull`, making `push` and `pull` symmetrical.
- See "branch.<name>.merge" for how to configure the upstream branch.
-* `simple` - like `upstream`, but refuses to push if the upstream
- branch's name is different from the local one. This is the safest
- option and is well-suited for beginners. It will become the default
- in Git 2.0.
-* `current` - push the current branch to a branch of the same name.
---
+
+* `nothing` - do not push anything (error out) unless a refspec is
+ explicitly given. This is primarily meant for people who want to
+ avoid mistakes by always being explicit.
+
+* `current` - push the current branch to update a branch with the same
+ name on the receiving end. Works in both central and non-central
+ workflows.
+
+* `upstream` - push the current branch back to the branch whose
+ changes are usually integrated into the current branch (which is
+ called `@{upstream}`). This mode only makes sense if you are
+ pushing to the same repository you would normally pull from
+ (i.e. central workflow).
+
+* `simple` - in centralized workflow, work like `upstream` with an
+ added safety to refuse to push if the upstream branch's name is
+ different from the local one.
++
+When pushing to a remote that is different from the remote you normally
+pull from, work as `current`. This is the safest option and is suited
+for beginners.
++
+This mode will become the default in Git 2.0.
+
+* `matching` - push all branches having the same name on both ends.
+ This makes the repository you are pushing to remember the set of
+ branches that will be pushed out (e.g. if you always push 'maint'
+ and 'master' there and no other branches, the repository you push
+ to will have these two branches, and your local 'maint' and
+ 'master' will be pushed there).
+
-The `simple`, `current` and `upstream` modes are for those who want to
-push out a single branch after finishing work, even when the other
-branches are not yet ready to be pushed out. If you are working with
-other people to push into the same shared repository, you would want
-to use one of these.
+To use this mode effectively, you have to make sure _all_ the
+branches you would push out are ready to be pushed out before
+running 'git push', as the whole point of this mode is to allow you
+to push all of the branches in one go. If you usually finish work
+on only one branch and push out the result, while other branches are
+unfinished, this mode is not for you. Also this mode is not
+suitable for pushing into a shared central repository, as other
+people may add new branches there, or update the tip of existing
+branches outside your control.
++
+This is currently the default, but Git 2.0 will change the default
+to `simple`.
+
+--
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
rebase.autosquash::
If set to true enable '--autosquash' option by default.
+rebase.autostash::
+ When set to true, automatically create a temporary stash
+ before the operation begins, and apply it after the operation
+ ends. This means that you can run rebase on a dirty worktree.
+ However, use with care: the final stash application after a
+ successful rebase might result in non-trivial conflicts.
+ Defaults to false.
+
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
receiving data from git-push and updating refs. You can stop
sendemail.smtpssl::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
+sendemail.smtpsslcertpath::
+ Path to ca-certificates (either a directory or a single file).
+ Set it to an empty string to disable certificate verification.
+
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
found below, taking precedence over those when the this
relative to the repository root (this was the default for Git
prior to v1.5.4).
+status.short::
+ Set to true to enable --short by default in linkgit:git-status[1].
+ The option --no-short takes precedence over this variable.
+
+status.branch::
+ Set to true to enable --branch by default in linkgit:git-status[1].
+ The option --no-branch takes precedence over this variable.
+
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which