test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
'
-test_expect_success 'wildcard ... only supported at end of spec' '
+test_expect_success 'wildcard ... only supported at end of spec 1' '
client_view "//depot/.../file11 //client/.../file11" &&
test_when_finished cleanup_git &&
test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
'
+test_expect_success 'wildcard ... only supported at end of spec 2' '
+ client_view "//depot/.../a/... //client/.../a/..." &&
+ test_when_finished cleanup_git &&
+ test_must_fail "$GITP4" clone --use-client-spec --dest="$git" //depot
+'
+
test_expect_success 'basic map' '
client_view "//depot/dir1/... //client/cli1/..." &&
files="cli1/file11 cli1/file12" &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
+#
+# What happens when two files of the same name are overlayed together?
+# The last-listed file should take preference.
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - filecollide
+# - dir2
+# - file21
+# - file22
+# - filecollide
+#
+test_expect_success 'overlay collision setup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/filecollide >dir1/filecollide &&
+ p4 add dir1/filecollide &&
+ p4 submit -d dir1/filecollide &&
+ echo dir2/filecollide >dir2/filecollide &&
+ p4 add dir2/filecollide &&
+ p4 submit -d dir2/filecollide
+ )
+'
+
+test_expect_success 'overlay collision 1 to 2' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 filecollide" &&
+ echo dir2/filecollide >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/filecollide &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/filecollide
+'
+
+test_expect_failure 'overlay collision 2 to 1' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 filecollide" &&
+ echo dir1/filecollide >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/filecollide &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/filecollide
+'
+
+test_expect_success 'overlay collision delete 2' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir2/filecollide &&
+ p4 submit -d "remove dir2/filecollide"
+ )
+'
+
+# no filecollide, got deleted with dir2
+test_expect_failure 'overlay collision 1 to 2, but 2 deleted' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files
+'
+
+test_expect_success 'overlay collision update 1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 open dir1/filecollide &&
+ echo dir1/filecollide update >dir1/filecollide &&
+ p4 submit -d "update dir1/filecollide"
+ )
+'
+
+# still no filecollide, dir2 still wins with the deletion even though the
+# change to dir1 is more recent
+test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files
+'
+
+test_expect_success 'overlay collision delete filecollides' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/filecollide dir2/filecollide &&
+ p4 submit -d "remove filecollides"
+ )
+'
+
+#
+# Overlays as part of sync, rather than initial checkout:
+# 1. add a file in dir1
+# 2. sync to include it
+# 3. add same file in dir2
+# 4. sync, make sure content switches as dir2 has priority
+# 5. add another file in dir1
+# 6. sync
+# 7. add/delete same file in dir2
+# 8. sync, make sure it disappears, again dir2 wins
+# 9. cleanup
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - colA
+# - colB
+# - dir2
+# - file21
+# - file22
+# - colA
+# - colB
+#
+test_expect_success 'overlay sync: add colA in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colA >dir1/colA &&
+ p4 add dir1/colA &&
+ p4 submit -d dir1/colA
+ )
+'
+
+test_expect_success 'overlay sync: initial git checkout' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync: add colA in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colA >dir2/colA &&
+ p4 add dir2/colA &&
+ p4 submit -d dir2/colA
+ )
+'
+
+test_expect_success 'overlay sync: colA content switch' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir2/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync: add colB in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colB >dir1/colB &&
+ p4 add dir1/colB &&
+ p4 submit -d dir1/colB
+ )
+'
+
+test_expect_success 'overlay sync: colB appears' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colB
+'
+
+test_expect_success 'overlay sync: add/delete colB in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colB >dir2/colB &&
+ p4 add dir2/colB &&
+ p4 submit -d dir2/colB &&
+ p4 delete dir2/colB &&
+ p4 submit -d "delete dir2/colB"
+ )
+'
+
+test_expect_success 'overlay sync: colB disappears' '
+ client_view "//depot/dir1/... //client/..." \
+ "+//depot/dir2/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ client_verify $files &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files
+'
+
+test_expect_success 'overlay sync: cleanup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/colA dir2/colA dir1/colB &&
+ p4 submit -d "remove overlay sync files"
+ )
+'
+
+#
+# Overlay tests again, but swapped so dir1 has priority.
+# 1. add a file in dir1
+# 2. sync to include it
+# 3. add same file in dir2
+# 4. sync, make sure content does not switch
+# 5. add another file in dir1
+# 6. sync
+# 7. add/delete same file in dir2
+# 8. sync, make sure it is still there
+# 9. cleanup
+#
+# //depot
+# - dir1
+# - file11
+# - file12
+# - colA
+# - colB
+# - dir2
+# - file21
+# - file22
+# - colA
+# - colB
+#
+test_expect_success 'overlay sync swap: add colA in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colA >dir1/colA &&
+ p4 add dir1/colA &&
+ p4 submit -d dir1/colA
+ )
+'
+
+test_expect_success 'overlay sync swap: initial git checkout' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ "$GITP4" clone --use-client-spec --dest="$git" //depot &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync swap: add colA in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colA >dir2/colA &&
+ p4 add dir2/colA &&
+ p4 submit -d dir2/colA
+ )
+'
+
+test_expect_failure 'overlay sync swap: colA no content switch' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA" &&
+ echo dir1/colA >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colA &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colA
+'
+
+test_expect_success 'overlay sync swap: add colB in dir1' '
+ client_view "//depot/dir1/... //client/dir1/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir1/colB >dir1/colB &&
+ p4 add dir1/colB &&
+ p4 submit -d dir1/colB
+ )
+'
+
+test_expect_success 'overlay sync swap: colB appears' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$git"/colB
+'
+
+test_expect_success 'overlay sync swap: add/delete colB in dir2' '
+ client_view "//depot/dir2/... //client/dir2/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ echo dir2/colB >dir2/colB &&
+ p4 add dir2/colB &&
+ p4 submit -d dir2/colB &&
+ p4 delete dir2/colB &&
+ p4 submit -d "delete dir2/colB"
+ )
+'
+
+test_expect_failure 'overlay sync swap: colB no change' '
+ client_view "//depot/dir2/... //client/..." \
+ "+//depot/dir1/... //client/..." &&
+ files="file11 file12 file21 file22 colA colB" &&
+ echo dir1/colB >actual &&
+ client_verify $files &&
+ test_cmp actual "$cli"/colB &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ "$GITP4" sync --use-client-spec &&
+ git merge --ff-only p4/master
+ ) &&
+ git_verify $files &&
+ test_cmp actual "$cli"/colB
+'
+
+test_expect_success 'overlay sync swap: cleanup' '
+ client_view "//depot/... //client/..." &&
+ (
+ cd "$cli" &&
+ p4 sync &&
+ p4 delete dir1/colA dir2/colA dir1/colB &&
+ p4 submit -d "remove overlay sync files"
+ )
+'
+
#
# Rename directories to test quoting in depot-side mappings
# //depot