ifndef::git-format-patch[]
-p::
-u::
+--patch::
Generate patch (see section on generating patches).
{git-diff? This is the default.}
endif::git-format-patch[]
--patience::
Generate a diff using the "patience diff" algorithm.
---stat[=width[,name-width]]::
+--stat[=<width>[,<name-width>]]::
Generate a diffstat. You can override the default
- output width for 80-column terminal by `--stat=width`.
+ output width for 80-column terminal by `--stat=<width>`.
The width of the filename part can be controlled by
giving another width to it separated by a comma.
number of modified files, as well as number of added and deleted
lines.
---dirstat[=limit]::
+--dirstat[=<limit>]::
Output the distribution of relative amount of changes (number of lines added or
removed) for each sub-directory. Directories with changes below
a cut-off percent (3% by default) are not shown. The cut-off percent
- can be set with `--dirstat=limit`. Changes in a child directory is not
+ can be set with `--dirstat=<limit>`. Changes in a child directory are not
counted for the parent directory, unless `--cumulative` is used.
---dirstat-by-file[=limit]::
+--dirstat-by-file[=<limit>]::
Same as `--dirstat`, but counts changed files instead of lines.
--summary::
gives the default to color output.
Same as `--color=never`.
---color-words[=<regex>]::
- Show colored word diff, i.e., color words which have changed.
- By default, words are separated by whitespace.
+--word-diff[=<mode>]::
+ Show a word diff, using the <mode> to delimit changed words.
+ By default, words are delimited by whitespace; see
+ `--word-diff-regex` below. The <mode> defaults to 'plain', and
+ must be one of:
++
+--
+color::
+ Highlight changed words using only colors. Implies `--color`.
+plain::
+ Show words as `[-removed-]` and `{+added+}`. Makes no
+ attempts to escape the delimiters if they appear in the input,
+ so the output may be ambiguous.
+porcelain::
+ Use a special line-based format intended for script
+ consumption. Added/removed/unchanged runs are printed in the
+ usual unified diff format, starting with a `+`/`-`/` `
+ character at the beginning of the line and extending to the
+ end of the line. Newlines in the input are represented by a
+ tilde `~` on a line of its own.
+none::
+ Disable word diff again.
+--
+
-When a <regex> is specified, every non-overlapping match of the
+Note that despite the name of the first mode, color is used to
+highlight the changed parts in all modes if enabled.
+
+--word-diff-regex=<regex>::
+ Use <regex> to decide what a word is, instead of considering
+ runs of non-whitespace to be a word. Also implies
+ `--word-diff` unless it was already enabled.
++
+Every non-overlapping match of the
<regex> is considered a word. Anything between these matches is
considered whitespace and ignored(!) for the purposes of finding
differences. You may want to append `|[^[:space:]]` to your regular
linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly
overrides any diff driver or configuration setting. Diff drivers
override configuration settings.
+
+--color-words[=<regex>]::
+ Equivalent to `--word-diff=color` plus (if a regex was
+ specified) `--word-diff-regex=<regex>`.
endif::git-format-patch[]
--no-renames::
the diff-patch output format. Non default number of
digits can be specified with `--abbrev=<n>`.
--B::
- Break complete rewrite changes into pairs of delete and create.
-
--M::
+-B[<n>][/<m>]::
+--break-rewrites[=[<n>][/<m>]]::
+ Break complete rewrite changes into pairs of delete and
+ create. This serves two purposes:
++
+It affects the way a change that amounts to a total rewrite of a file
+not as a series of deletion and insertion mixed together with a very
+few lines that happen to match textually as the context, but as a
+single deletion of everything old followed by a single insertion of
+everything new, and the number `m` controls this aspect of the -B
+option (defaults to 60%). `-B/70%` specifies that less than 30% of the
+original should remain in the result for git to consider it a total
+rewrite (i.e. otherwise the resulting patch will be a series of
+deletion and insertion mixed together with context lines).
++
+When used with -M, a totally-rewritten file is also considered as the
+source of a rename (usually -M only considers a file that disappeared
+as the source of a rename), and the number `n` controls this aspect of
+the -B option (defaults to 50%). `-B20%` specifies that a change with
+addition and deletion compared to 20% or more of the file's size are
+eligible for being picked up as a possible source of a rename to
+another file.
+
+-M[<n>]::
+--detect-renames[=<n>]::
ifndef::git-log[]
Detect renames.
endif::git-log[]
For following files across renames while traversing history, see
`--follow`.
endif::git-log[]
-
--C::
+ If `n` is specified, it is a is a threshold on the similarity
+ index (i.e. amount of addition/deletions compared to the
+ file's size). For example, `-M90%` means git should consider a
+ delete/add pair to be a rename if more than 90% of the file
+ hasn't changed.
+
+-C[<n>]::
+--detect-copies[=<n>]::
Detect copies as well as renames. See also `--find-copies-harder`.
-
-ifndef::git-format-patch[]
---diff-filter=[ACDMRTUXB*]::
- Select only files that are Added (`A`), Copied (`C`),
- Deleted (`D`), Modified (`M`), Renamed (`R`), have their
- type (i.e. regular file, symlink, submodule, ...) changed (`T`),
- are Unmerged (`U`), are
- Unknown (`X`), or have had their pairing Broken (`B`).
- Any combination of the filter characters may be used.
- When `*` (All-or-none) is added to the combination, all
- paths are selected if there is any file that matches
- other criteria in the comparison; if there is no file
- that matches other criteria, nothing is selected.
-endif::git-format-patch[]
+ If `n` is specified, it has the same meaning as for `-M<n>`.
--find-copies-harder::
For performance reasons, by default, `-C` option finds copies only
number.
ifndef::git-format-patch[]
+--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]::
+ Select only files that are Added (`A`), Copied (`C`),
+ Deleted (`D`), Modified (`M`), Renamed (`R`), have their
+ type (i.e. regular file, symlink, submodule, ...) changed (`T`),
+ are Unmerged (`U`), are
+ Unknown (`X`), or have had their pairing Broken (`B`).
+ Any combination of the filter characters (including none) can be used.
+ When `*` (All-or-none) is added to the combination, all
+ paths are selected if there is any file that matches
+ other criteria in the comparison; if there is no file
+ that matches other criteria, nothing is selected.
+
-S<string>::
Look for differences that introduce or remove an instance of
<string>. Note that this is different than the string simply
appearing in diff output; see the 'pickaxe' entry in
linkgit:gitdiffcore[7] for more details.
+-G<regex>::
+ Look for differences whose added or removed line matches
+ the given <regex>.
+
--pickaxe-all::
- When `-S` finds a change, show all the changes in that
+ When `-S` or `-G` finds a change, show all the changes in that
changeset, not just the files that contain the change
in <string>.
--no-ext-diff::
Disallow external diff drivers.
---ignore-submodules::
- Ignore changes to submodules in the diff generation.
+--ignore-submodules[=<when>]::
+ Ignore changes to submodules in the diff generation. <when> can be
+ either "none", "untracked", "dirty" or "all", which is the default
+ Using "none" will consider the submodule modified when it either contains
+ untracked or modified files or its HEAD differs from the commit recorded
+ in the superproject and can be used to override any settings of the
+ 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When
+ "untracked" is used submodules are not considered dirty when they only
+ contain untracked content (but they are still scanned for modified
+ content). Using "dirty" ignores all changes to the work tree of submodules,
+ only changes to the commits stored in the superproject are shown (this was
+ the behavior until 1.7.0). Using "all" hides all changes to submodules.
--src-prefix=<prefix>::
Show the given source prefix instead of "a/".