--------
Subsection names are case sensitive and can contain any characters except
-newline (doublequote `"` and backslash can be included by escaping them
-as `\"` and `\\`, respectively). Section headers cannot span multiple
-lines. Variables may belong directly to a section or to a given subsection.
-You can have `[section]` if you have `[section "subsection"]`, but you
-don't need to.
+newline and the null byte. Doublequote `"` and backslash can be included
+by escaping them as `\"` and `\\`, respectively. Backslashes preceding
+other characters are dropped when reading; for example, `\t` is read as
+`t` and `\0` is read as `0` Section headers cannot span multiple lines.
+Variables may belong directly to a section or to a given subsection. You
+can have `[section]` if you have `[section "subsection"]`, but you don't
+need to.
There is also a deprecated `[section.subsection]` syntax. With this
syntax, the subsection name is converted to lower-case and is also
false;; Boolean false literals are `no`, `off`, `false`,
`0` and the empty string.
+
-When converting value to the canonical form using `--bool` type
+When converting a value to its canonical form using the `--type=bool` type
specifier, 'git config' will ensure that the output is "true" or
"false" (spelled in lowercase).
commitBeforeMerge::
Advice shown when linkgit:git-merge[1] refuses to
merge to avoid overwriting local changes.
+ resetQuiet::
+ Advice to consider using the `--quiet` option to linkgit:git-reset[1]
+ when the command takes more than 2 seconds to enumerate unstaged
+ changes after reset.
resolveConflict::
Advice shown by various commands when conflicts
prevent the operation from being performed.
Advice shown when you used linkgit:git-checkout[1] to
move to the detach HEAD state, to instruct how to create
a local branch after the fact.
+ checkoutAmbiguousRemoteBranchName::
+ Advice shown when the argument to
+ linkgit:git-checkout[1] ambiguously resolves to a
+ remote tracking branch on more than one remote in
+ situations where an unambiguous argument would have
+ otherwise caused a remote-tracking branch to be
+ checked out. See the `checkout.defaultRemote`
+ configuration variable for how to set a given remote
+ to used by default in some situations where this
+ advice would be printed.
amWorkDir::
Advice that shows the location of the patch file when
linkgit:git-am[1] fails to apply it.
addEmbeddedRepo::
Advice on what to do when you've accidentally added one
git repo inside of another.
+ ignoredHook::
+ Advice shown if a hook is ignored because the hook is not
+ set as executable.
+ waitingForEditor::
+ Print a message to the terminal whenever Git is waiting for
+ editor input from the user.
--
core.fileMode::
default mode is 'dotGitOnly'.
core.ignoreCase::
- If true, this option enables various workarounds to enable
+ Internal variable which enables various workarounds to enable
Git to work better on filesystems that are not case sensitive,
- like FAT. For example, if a directory listing finds
- "makefile" when Git expects "Makefile", Git will assume
+ like APFS, HFS+, FAT, NTFS, etc. For example, if a directory listing
+ finds "makefile" when Git expects "Makefile", Git will assume
it is really the same file, and continue to remember it as
"Makefile".
+
The default is false, except linkgit:git-clone[1] or linkgit:git-init[1]
will probe and set core.ignoreCase true if appropriate when the repository
is created.
++
+Git relies on the proper configuration of this variable for your operating
+and file system. Modifying this value may result in unexpected behavior.
core.precomposeUnicode::
This option is only used by Mac OS implementation of Git.
8.3 "short" names.
Defaults to `true` on Windows, and `false` elsewhere.
+core.fsmonitor::
+ If set, the value of this variable is used as a command which
+ will identify all files that may have changed since the
+ requested date/time. This information is used to speed up git by
+ avoiding unnecessary processing of files that have not changed.
+ See the "fsmonitor-watchman" section of linkgit:githooks[5].
+
core.trustctime::
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time
See linkgit:git-update-index[1]. `keep` by default.
core.checkStat::
- Determines which stat fields to match between the index
- and work tree. The user can set this to 'default' or
- 'minimal'. Default (or explicitly 'default'), is to check
- all fields, including the sub-second part of mtime and ctime.
+ When missing or is set to `default`, many fields in the stat
+ structure are checked to detect if a file has been modified
+ since Git looked at it. When this configuration variable is
+ set to `minimal`, sub-second part of mtime and ctime, the
+ uid and gid of the owner of the file, the inode number (and
+ the device number, if Git was compiled to use it), are
+ excluded from the check among these fields, leaving only the
+ whole-second part of mtime (and ctime, if `core.trustCtime`
+ is set) and the filesize to be checked.
++
+There are implementations of Git that do not leave usable values in
+some fields (e.g. JGit); by excluding these fields from the
+comparison, the `minimal` mode may help interoperability when the
+same repository is used by these other systems at the same time.
core.quotePath::
Commands that output paths (e.g. 'ls-files', 'diff'), will
This variable can be set to 'input',
in which case no output conversion is performed.
+core.checkRoundtripEncoding::
+ A comma and/or whitespace separated list of encodings that Git
+ performs UTF-8 round trip checks on if they are used in an
+ `working-tree-encoding` attribute (see linkgit:gitattributes[5]).
+ The default value is `SHIFT-JIS`.
+
core.symlinks::
If false, symbolic links are checked out as small plain files that
contain the link text. linkgit:git-update-index[1] and
This is sometimes needed to work with old scripts that
expect HEAD to be a symbolic link.
+core.alternateRefsCommand::
+ When advertising tips of available history from an alternate, use the shell to
+ execute the specified command instead of linkgit:git-for-each-ref[1]. The
+ first argument is the absolute path of the alternate. Output must contain one
+ hex object id per line (i.e., the same as produce by `git for-each-ref
+ --format='%(objectname)'`).
++
+Note that you cannot generally put `git for-each-ref` directly into the config
+value, as it does not take a repository path as an argument (but you can wrap
+the command above in a shell script).
+
+core.alternateRefsPrefixes::
+ When listing references from an alternate, list only references that begin
+ with the given prefix. Prefixes match as if they were given as arguments to
+ linkgit:git-for-each-ref[1]. To list multiple prefixes, separate them with
+ whitespace. If `core.alternateRefsCommand` is set, setting
+ `core.alternateRefsPrefixes` has no effect.
+
core.bare::
If true this repository is assumed to be 'bare' and has no
working directory associated with it. If this is the case a
all; -1 means to try indefinitely. Default is 1000 (i.e.,
retry for 1 second).
-sequence.editor::
- Text editor used by `git rebase -i` for editing the rebase instruction file.
- The value is meant to be interpreted by the shell when it is used.
- It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
- When not configured the default commit message editor is used instead.
-
core.pager::
Text viewer for use by Git commands (e.g., 'less'). The value
is meant to be interpreted by the shell. The order of preference
This setting defaults to "refs/notes/commits", and it can be overridden by
the `GIT_NOTES_REF` environment variable. See linkgit:git-notes[1].
+core.commitGraph::
+ If true, then git will read the commit-graph file (if it exists)
+ to parse the graph structure of commits. Defaults to false. See
+ linkgit:git-commit-graph[1] for more information.
+
+core.useReplaceRefs::
+ If set to `false`, behave as if the `--no-replace-objects`
+ option was given on the command line. See linkgit:git[1] and
+ linkgit:git-replace[1] for more information.
+
+core.multiPackIndex::
+ Use the multi-pack-index file to track multiple packfiles using a
+ single index. See link:technical/multi-pack-index.html[the
+ multi-pack-index design document].
+
core.sparseCheckout::
Enable "sparse checkout" feature. See section "Sparse checkout" in
linkgit:git-read-tree[1] for more information.
Tells 'git apply' how to handle whitespaces, in the same way
as the `--whitespace` option. See linkgit:git-apply[1].
+blame.blankBoundary::
+ Show blank commit object name for boundary commits in
+ linkgit:git-blame[1]. This option defaults to false.
+
+blame.coloring::
+ This determines the coloring scheme to be applied to blame
+ output. It can be 'repeatedLines', 'highlightRecent',
+ or 'none' which is the default.
+
+blame.date::
+ Specifies the format used to output dates in linkgit:git-blame[1].
+ If unset the iso format is used. For supported values,
+ see the discussion of the `--date` option at linkgit:git-log[1].
+
+blame.showEmail::
+ Show the author email instead of author name in linkgit:git-blame[1].
+ This option defaults to false.
+
+blame.showRoot::
+ Do not treat root commits as boundaries in linkgit:git-blame[1].
+ This option defaults to false.
+
branch.autoSetupMerge::
Tells 'git branch' and 'git checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
branch to track another branch.
This option defaults to never.
+branch.sort::
+ This variable controls the sort ordering of branches when displayed by
+ linkgit:git-branch[1]. Without the "--sort=<value>" option provided, the
+ value of this variable will be used as the default.
+ See linkgit:git-for-each-ref[1] field names for valid values.
+
branch.<name>.remote::
When on branch <name>, it tells 'git fetch' and 'git push'
which remote to fetch from/push to. The remote to push to
"git pull" is run. See "pull.rebase" for doing this in a non
branch-specific manner.
+
+When `merges`, pass the `--rebase-merges` option to 'git rebase'
+so that the local merge commits are included in the rebase (see
+linkgit:git-rebase[1] for details).
++
When preserve, also pass `--preserve-merges` along to 'git rebase'
so that locally committed merge commits will not be flattened
by running 'git pull'.
browse HTML help (see `-w` option in linkgit:git-help[1]) or a
working repository in gitweb (see linkgit:git-instaweb[1]).
+checkout.defaultRemote::
+ When you run 'git checkout <something>' and only have one
+ remote, it may implicitly fall back on checking out and
+ tracking e.g. 'origin/<something>'. This stops working as soon
+ as you have more than one remote with a '<something>'
+ reference. This setting allows for setting the name of a
+ preferred remote that should always win when it comes to
+ disambiguation. The typical use-case is to set this to
+ `origin`.
++
+Currently this is used by linkgit:git-checkout[1] when 'git checkout
+<something>' will checkout the '<something>' branch on another remote,
+and by linkgit:git-worktree[1] when 'git worktree add' refers to a
+remote branch. This setting might be used for other checkout-like
+commands or functionality in the future.
+
+checkout.optimizeNewBranch::
+ Optimizes the performance of "git checkout -b <new_branch>" when
+ using sparse-checkout. When set to true, git will not update the
+ repo based on the current sparse-checkout settings. This means it
+ will not update the skip-worktree bit in the index nor add/remove
+ files in the working directory to reflect the current sparse checkout
+ settings nor will it show the local changes.
+
clean.requireForce::
A boolean to make git-clean do nothing unless given -f,
-i or -n. Defaults to true.
+color.advice::
+ A boolean to enable/disable color in hints (e.g. when a push
+ failed, see `advice.*` for a list). May be set to `always`,
+ `false` (or `never`) or `auto` (or `true`), in which case colors
+ are used only when the error output goes to a terminal. If
+ unset, then the value of `color.ui` is used (`auto` by default).
+
+color.advice.hint::
+ Use customized color for hints.
+
+color.blame.highlightRecent::
+ This can be used to color the metadata of a blame line depending
+ on age of the line.
++
+This setting should be set to a comma-separated list of color and date settings,
+starting and ending with a color, the dates should be set from oldest to newest.
+The metadata will be colored given the colors if the the line was introduced
+before the given timestamp, overwriting older timestamped colors.
++
+Instead of an absolute timestamp relative timestamps work as well, e.g.
+2.weeks.ago is valid to address anything older than 2 weeks.
++
+It defaults to 'blue,12 month ago,white,1 month ago,red', which colors
+everything older than one year blue, recent changes between one month and
+one year old are kept white, and lines introduced within the last month are
+colored red.
+
+color.blame.repeatedLines::
+ Use the customized color for the part of git-blame output that
+ is repeated meta information per line (such as commit id,
+ author name, date and timezone). Defaults to cyan.
+
color.branch::
A boolean to enable/disable color in the output of
linkgit:git-branch[1]. May be set to `always`,
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
command line with the `--color[=<when>]` option.
-diff.colorMoved::
- If set to either a valid `<mode>` or a true value, moved lines
- in a diff are colored differently, for details of valid modes
- see '--color-moved' in linkgit:git-diff[1]. If simply set to
- true the default color mode will be used. When set to false,
- moved lines are not colored.
-
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
(highlighting whitespace errors), `oldMoved` (deleted lines),
`newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`,
`oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative`
- and `newMovedAlternativeDimmed` (See the '<mode>'
- setting of '--color-moved' in linkgit:git-diff[1] for details).
+ `newMovedAlternativeDimmed` (See the '<mode>'
+ setting of '--color-moved' in linkgit:git-diff[1] for details),
+ `contextDimmed`, `oldDimmed`, `newDimmed`, `contextBold`,
+ `oldBold`, and `newBold` (see linkgit:git-range-diff[1] for details).
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
- branches, remote-tracking branches, tags, stash and HEAD, respectively.
+ branches, remote-tracking branches, tags, stash and HEAD, respectively
+ and `grafted` for grafted commits.
color.grep::
When set to `always`, always highlight matches. When `false` (or
filename prefix (when not using `-h`)
`function`;;
function name lines (when using `-p`)
-`linenumber`;;
+`lineNumber`;;
line number prefix (when using `-n`)
+`column`;;
+ column number prefix (when using `--column`)
`match`;;
matching text (same as setting `matchContext` and `matchSelected`)
`matchContext`;;
A boolean to enable/disable colored output when the pager is in
use (default is true).
+color.push::
+ A boolean to enable/disable color in push errors. May be set to
+ `always`, `false` (or `never`) or `auto` (or `true`), in which
+ case colors are used only when the error output goes to a terminal.
+ If unset, then the value of `color.ui` is used (`auto` by default).
+
+color.push.error::
+ Use customized color for push errors.
+
+color.remote::
+ If set, keywords at the start of the line are highlighted. The
+ keywords are "error", "warning", "hint" and "success", and are
+ matched case-insensitively. May be set to `always`, `false` (or
+ `never`) or `auto` (or `true`). If unset, then the value of
+ `color.ui` is used (`auto` by default).
+
+color.remote.<slot>::
+ Use customized color for each remote keyword. `<slot>` may be
+ `hint`, `warning`, `success` or `error` which match the
+ corresponding keyword.
+
color.showBranch::
A boolean to enable/disable color in the output of
linkgit:git-show-branch[1]. May be set to `always`,
status short-format), or
`unmerged` (files which have unmerged changes).
+color.transport::
+ A boolean to enable/disable color when pushes are rejected. May be
+ set to `always`, `false` (or `never`) or `auto` (or `true`), in which
+ case colors are used only when the error output goes to a terminal.
+ If unset, then the value of `color.ui` is used (`auto` by default).
+
+color.transport.rejected::
+ Use customized color when a push was rejected.
+
color.ui::
This variable determines the default value for variables such
as `color.diff` and `color.grep` that control the use of color
credentialCache.ignoreSIGHUP::
Tell git-credential-cache--daemon to ignore SIGHUP, instead of quitting.
+completion.commands::
+ This is only used by git-completion.bash to add or remove
+ commands from the list of completed commands. Normally only
+ porcelain commands and a few select others are completed. You
+ can add more commands, separated by space, in this
+ variable. Prefixing the command with '-' will remove it from
+ the existing list.
+
include::diff-config.txt[]
difftool.<tool>.path::
operation complete faster, especially on slow filesystems. If
not set, the value of `transfer.unpackLimit` is used instead.
-fetch.recurseSubmodules::
- This option can be either set to a boolean value or to 'on-demand'.
- Setting it to a boolean changes the behavior of fetch and pull to
- unconditionally recurse into submodules when set to true or to not
- recurse at all when set to false. When set to 'on-demand' (the default
- value), fetch and pull will only recurse into a populated submodule
- when its superproject retrieves a commit that updates the submodule's
- reference.
-
-fetch.fsckObjects::
- If it is set to true, git-fetch-pack will check all fetched
- objects. It will abort in the case of a malformed object or a
- broken link. The result of an abort are only dangling objects.
- Defaults to false. If not set, the value of `transfer.fsckObjects`
- is used instead.
-
-fetch.unpackLimit::
- If the number of objects fetched over the Git native
- transfer is below this
- limit, then the objects will be unpacked into loose object
- files. However if the number of received objects equals or
- exceeds this limit then the received pack will be stored as
- a pack, after adding any missing delta bases. Storing the
- pack from a push can make the push operation complete faster,
- especially on slow filesystems. If not set, the value of
- `transfer.unpackLimit` is used instead.
-
-fetch.prune::
- If true, fetch will automatically behave as if the `--prune`
- option was given on the command line. See also `remote.<name>.prune`.
-
-fetch.output::
- Control how ref update status is printed. Valid values are
- `full` and `compact`. Default value is `full`. See section
- OUTPUT in linkgit:git-fetch[1] for detail.
-
-format.attach::
- Enable multipart/mixed attachments as the default for
- 'format-patch'. The value can also be a double quoted string
- which will enable attachments as the default and set the
- value as the boundary. See the --attach option in
- linkgit:git-format-patch[1].
-
-format.from::
- Provides the default value for the `--from` option to format-patch.
- Accepts a boolean value, or a name and email address. If false,
- format-patch defaults to `--no-from`, using commit authors directly in
- the "From:" field of patch mails. If true, format-patch defaults to
- `--from`, using your committer identity in the "From:" field of patch
- mails and including a "From:" field in the body of the patch mail if
- different. If set to a non-boolean value, format-patch uses that
- value instead of your committer identity. Defaults to false.
-
-format.numbered::
- A boolean which can enable or disable sequence numbers in patch
- subjects. It defaults to "auto" which enables it only if there
- is more than one patch. It can be enabled or disabled for all
- messages by setting it to "true" or "false". See --numbered
- option in linkgit:git-format-patch[1].
-
-format.headers::
- Additional email headers to include in a patch to be submitted
- by mail. See linkgit:git-format-patch[1].
-
-format.to::
-format.cc::
- Additional recipients to include in a patch to be submitted
- by mail. See the --to and --cc options in
- linkgit:git-format-patch[1].
-
-format.subjectPrefix::
- The default for format-patch is to output files with the '[PATCH]'
- subject prefix. Use this variable to change that prefix.
-
-format.signature::
- The default for format-patch is to output a signature containing
- the Git version number. Use this variable to change that default.
- Set this variable to the empty string ("") to suppress
- signature generation.
-
-format.signatureFile::
- Works just like format.signature except the contents of the
- file specified by this variable will be used as the signature.
-
-format.suffix::
- The default for format-patch is to output files with the suffix
- `.patch`. Use this variable to change that suffix (make sure to
- include the dot if you want it).
-
-format.pretty::
- The default pretty format for log/show/whatchanged command,
- See linkgit:git-log[1], linkgit:git-show[1],
- linkgit:git-whatchanged[1].
-
-format.thread::
- The default threading style for 'git format-patch'. Can be
- a boolean value, or `shallow` or `deep`. `shallow` threading
- makes every mail a reply to the head of the series,
- where the head is chosen from the cover letter, the
- `--in-reply-to`, and the first patch mail, in this order.
- `deep` threading makes every mail a reply to the previous one.
- A true boolean value is the same as `shallow`, and a false
- value disables threading.
-
-format.signOff::
- A boolean value which lets you enable the `-s/--signoff` option of
- format-patch by default. *Note:* Adding the Signed-off-by: line to a
- patch should be a conscious act and means that you certify you have
- the rights to submit this work under the same open source license.
- Please see the 'SubmittingPatches' document for further discussion.
-
-format.coverLetter::
- A boolean that controls whether to generate a cover-letter when
- format-patch is invoked, but in addition can be set to "auto", to
- generate a cover-letter only when there's more than one patch.
-
-format.outputDirectory::
- Set a custom directory to store the resulting files instead of the
- current working directory.
-
-format.useAutoBase::
- A boolean value which lets you enable the `--base=auto` option of
- format-patch by default.
+include::fetch-config.txt[]
+
+include::format-config.txt[]
filter.<driver>.clean::
The command which is used to convert the content of a worktree
linkgit:gitattributes[5] for details.
fsck.<msg-id>::
- Allows overriding the message type (error, warn or ignore) of a
- specific message ID such as `missingEmail`.
-+
-For convenience, fsck prefixes the error/warning with the message ID,
-e.g. "missingEmail: invalid author/committer line - missing email" means
-that setting `fsck.missingEmail = ignore` will hide that issue.
-+
-This feature is intended to support working with legacy repositories
-which cannot be repaired without disruptive changes.
+ During fsck git may find issues with legacy data which
+ wouldn't be generated by current versions of git, and which
+ wouldn't be sent over the wire if `transfer.fsckObjects` was
+ set. This feature is intended to support working with legacy
+ repositories containing such data.
++
+Setting `fsck.<msg-id>` will be picked up by linkgit:git-fsck[1], but
+to accept pushes of such data set `receive.fsck.<msg-id>` instead, or
+to clone or fetch it set `fetch.fsck.<msg-id>`.
++
+The rest of the documentation discusses `fsck.*` for brevity, but the
+same applies for the corresponding `receive.fsck.*` and
+`fetch.<msg-id>.*`. variables.
++
+Unlike variables like `color.ui` and `core.editor` the
+`receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>` variables will not
+fall back on the `fsck.<msg-id>` configuration if they aren't set. To
+uniformly configure the same fsck settings in different circumstances
+all three of them they must all set to the same values.
++
+When `fsck.<msg-id>` is set, errors can be switched to warnings and
+vice versa by configuring the `fsck.<msg-id>` setting where the
+`<msg-id>` is the fsck message ID and the value is one of `error`,
+`warn` or `ignore`. For convenience, fsck prefixes the error/warning
+with the message ID, e.g. "missingEmail: invalid author/committer line
+- missing email" means that setting `fsck.missingEmail = ignore` will
+hide that issue.
++
+In general, it is better to enumerate existing objects with problems
+with `fsck.skipList`, instead of listing the kind of breakages these
+problematic objects share to be ignored, as doing the latter will
+allow new instances of the same breakages go unnoticed.
++
+Setting an unknown `fsck.<msg-id>` value will cause fsck to die, but
+doing the same for `receive.fsck.<msg-id>` and `fetch.fsck.<msg-id>`
+will only cause git to warn.
fsck.skipList::
- The path to a sorted list of object names (i.e. one SHA-1 per
+ The path to a list of object names (i.e. one unabbreviated SHA-1 per
line) that are known to be broken in a non-fatal way and should
- be ignored. This feature is useful when an established project
- should be accepted despite early commits containing errors that
- can be safely ignored such as invalid committer email addresses.
- Note: corrupt objects cannot be skipped with this setting.
+ be ignored. On versions of Git 2.20 and later comments ('#'), empty
+ lines, and any leading and trailing whitespace is ignored. Everything
+ but a SHA-1 per line will error out on older versions.
++
+This feature is useful when an established project should be accepted
+despite early commits containing errors that can be safely ignored
+such as invalid committer email addresses. Note: corrupt objects
+cannot be skipped with this setting.
++
+Like `fsck.<msg-id>` this variable has corresponding
+`receive.fsck.skipList` and `fetch.fsck.skipList` variants.
++
+Unlike variables like `color.ui` and `core.editor` the
+`receive.fsck.skipList` and `fetch.fsck.skipList` variables will not
+fall back on the `fsck.skipList` configuration if they aren't set. To
+uniformly configure the same fsck settings in different circumstances
+all three of them they must all set to the same values.
++
+Older versions of Git (before 2.20) documented that the object names
+list should be sorted. This was never a requirement, the object names
+could appear in any order, but when reading the list we tracked whether
+the list was sorted for the purposes of an internal binary search
+implementation, which could save itself some work with an already sorted
+list. Unless you had a humongous list there was no reason to go out of
+your way to pre-sort the list. After Git version 2.20 a hash implementation
+is used instead, so there's now no reason to pre-sort the list.
gc.aggressiveDepth::
The depth parameter used in the delta compression
Make `git gc --auto` return immediately and run in background
if the system supports it. Default is true.
+gc.bigPackThreshold::
+ If non-zero, all packs larger than this limit are kept when
+ `git gc` is run. This is very similar to `--keep-base-pack`
+ except that all packs that meet the threshold are kept, not
+ just the base pack. Defaults to zero. Common unit suffixes of
+ 'k', 'm', or 'g' are supported.
++
+Note that if the number of kept packs is more than gc.autoPackLimit,
+this configuration variable is ignored, all packs except the base pack
+will be repacked. After this the number of packs should go below
+gc.autoPackLimit and gc.bigPackThreshold should be respected again.
+
+gc.writeCommitGraph::
+ If true, then gc will rewrite the commit-graph file when
+ linkgit:git-gc[1] is run. When using linkgit:git-gc[1]
+ '--auto' the commit-graph will be updated if housekeeping is
+ required. Default is false. See linkgit:git-commit-graph[1]
+ for details.
+
gc.logExpiry::
- If the file gc.log exists, then `git gc --auto` won't run
+ If the file gc.log exists, then `git gc --auto` will print
+ its content and exit with status zero instead of running
unless that file is more than 'gc.logExpiry' old. Default is
"1.day". See `gc.pruneExpire` for more ways to specify its
value.
You can also use more human-readable "1.month.ago", etc.
The default is 15 days. See linkgit:git-rerere[1].
-gitcvs.commitMsgAnnotation::
- Append this string to each commit message. Set to empty string
- to disable this feature. Defaults to "via git-CVS emulator".
-
-gitcvs.enabled::
- Whether the CVS server interface is enabled for this repository.
- See linkgit:git-cvsserver[1].
-
-gitcvs.logFile::
- Path to a log file where the CVS server interface well... logs
- various stuff. See linkgit:git-cvsserver[1].
-
-gitcvs.usecrlfattr::
- If true, the server will look up the end-of-line conversion
- attributes for files to determine the `-k` modes to use. If
- the attributes force Git to treat a file as text,
- the `-k` mode will be left blank so CVS clients will
- treat it as text. If they suppress text conversion, the file
- will be set with '-kb' mode, which suppresses any newline munging
- the client might otherwise do. If the attributes do not allow
- the file type to be determined, then `gitcvs.allBinary` is
- used. See linkgit:gitattributes[5].
-
-gitcvs.allBinary::
- This is used if `gitcvs.usecrlfattr` does not resolve
- the correct '-kb' mode to use. If true, all
- unresolved files are sent to the client in
- mode '-kb'. This causes the client to treat them
- as binary files, which suppresses any newline munging it
- otherwise might do. Alternatively, if it is set to "guess",
- then the contents of the file are examined to decide if
- it is binary, similar to `core.autocrlf`.
-
-gitcvs.dbName::
- Database used by git-cvsserver to cache revision information
- derived from the Git repository. The exact meaning depends on the
- used database driver, for SQLite (which is the default driver) this
- is a filename. Supports variable substitution (see
- linkgit:git-cvsserver[1] for details). May not contain semicolons (`;`).
- Default: '%Ggitcvs.%m.sqlite'
-
-gitcvs.dbDriver::
- Used Perl DBI driver. You can specify any available driver
- for this here, but it might not work. git-cvsserver is tested
- with 'DBD::SQLite', reported to work with 'DBD::Pg', and
- reported *not* to work with 'DBD::mysql'. Experimental feature.
- May not contain double colons (`:`). Default: 'SQLite'.
- See linkgit:git-cvsserver[1].
-
-gitcvs.dbUser, gitcvs.dbPass::
- Database user and password. Only useful if setting `gitcvs.dbDriver`,
- since SQLite has no concept of database users and/or passwords.
- 'gitcvs.dbUser' supports variable substitution (see
- linkgit:git-cvsserver[1] for details).
-
-gitcvs.dbTableNamePrefix::
- Database table name prefix. Prepended to the names of any
- database tables used, allowing a single database to be used
- for several repositories. Supports variable substitution (see
- linkgit:git-cvsserver[1] for details). Any non-alphabetic
- characters will be replaced with underscores.
-
-All gitcvs variables except for `gitcvs.usecrlfattr` and
-`gitcvs.allBinary` can also be specified as
-'gitcvs.<access_method>.<varname>' (where 'access_method'
-is one of "ext" and "pserver") to make them apply only for the given
-access method.
+include::gitcvs-config.txt[]
gitweb.category::
gitweb.description::
grep.lineNumber::
If set to true, enable `-n` option by default.
+grep.column::
+ If set to true, enable the `--column` option by default.
+
grep.patternType::
Set the default matching behavior. Using a value of 'basic', 'extended',
'fixed', or 'perl' will enable the `--basic-regexp`, `--extended-regexp`,
signed, and the program is expected to send the result to its
standard output.
-gui.commitMsgWidth::
- Defines how wide the commit message window is in the
- linkgit:git-gui[1]. "75" is the default.
-
-gui.diffContext::
- Specifies how many context lines should be used in calls to diff
- made by the linkgit:git-gui[1]. The default is "5".
-
-gui.displayUntracked::
- Determines if linkgit:git-gui[1] shows untracked files
- in the file list. The default is "true".
-
-gui.encoding::
- Specifies the default encoding to use for displaying of
- file contents in linkgit:git-gui[1] and linkgit:gitk[1].
- It can be overridden by setting the 'encoding' attribute
- for relevant files (see linkgit:gitattributes[5]).
- If this option is not set, the tools default to the
- locale encoding.
-
-gui.matchTrackingBranch::
- Determines if new branches created with linkgit:git-gui[1] should
- default to tracking remote branches with matching names or
- not. Default: "false".
-
-gui.newBranchTemplate::
- Is used as suggested name when creating new branches using the
- linkgit:git-gui[1].
-
-gui.pruneDuringFetch::
- "true" if linkgit:git-gui[1] should prune remote-tracking branches when
- performing a fetch. The default value is "false".
-
-gui.trustmtime::
- Determines if linkgit:git-gui[1] should trust the file modification
- timestamp or not. By default the timestamps are not trusted.
-
-gui.spellingDictionary::
- Specifies the dictionary used for spell checking commit messages in
- the linkgit:git-gui[1]. When set to "none" spell checking is turned
- off.
-
-gui.fastCopyBlame::
- If true, 'git gui blame' uses `-C` instead of `-C -C` for original
- location detection. It makes blame significantly faster on huge
- repositories at the expense of less thorough copy detection.
-
-gui.copyBlameThreshold::
- Specifies the threshold to use in 'git gui blame' original location
- detection, measured in alphanumeric characters. See the
- linkgit:git-blame[1] manual for more information on copy detection.
-
-gui.blamehistoryctx::
- Specifies the radius of history context in days to show in
- linkgit:gitk[1] for the selected commit, when the `Show History
- Context` menu item is invoked from 'git gui blame'. If this
- variable is set to zero, the whole history is shown.
+gpg.format::
+ Specifies which key format to use when signing with `--gpg-sign`.
+ Default is "openpgp" and another possible value is "x509".
+
+gpg.<format>.program::
+ Use this to customize the program used for the signing format you
+ chose. (see `gpg.program` and `gpg.format`) `gpg.program` can still
+ be used as a legacy synonym for `gpg.openpgp.program`. The default
+ value for `gpg.x509.program` is "gpgsm".
+
+include::gui-config.txt[]
guitool.<name>.cmd::
Specifies the shell command line to execute when the corresponding item
- tlsv1.0
- tlsv1.1
- tlsv1.2
+ - tlsv1.3
+
Can be overridden by the `GIT_SSL_VERSION` environment variable.
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
- over HTTPS. Can be overridden by the `GIT_SSL_NO_VERIFY` environment
- variable.
+ over HTTPS. Defaults to true. Can be overridden by the
+ `GIT_SSL_NO_VERIFY` environment variable.
http.sslCert::
File containing the SSL certificate when fetching or pushing
visited as a result of a redirection do not participate in matching.
ssh.variant::
- Depending on the value of the environment variables `GIT_SSH` or
- `GIT_SSH_COMMAND`, or the config setting `core.sshCommand`, Git
- auto-detects whether to adjust its command-line parameters for use
- with plink or tortoiseplink, as opposed to the default (OpenSSH).
+ By default, Git determines the command line arguments to use
+ based on the basename of the configured SSH command (configured
+ using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or
+ the config setting `core.sshCommand`). If the basename is
+ unrecognized, Git will attempt to detect support of OpenSSH
+ options by first invoking the configured SSH command with the
+ `-G` (print configuration) option and will subsequently use
+ OpenSSH options (if that is successful) or no options besides
+ the host and remote command (if it fails).
++
+The config variable `ssh.variant` can be set to override this detection.
+Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`,
+`tortoiseplink`, `simple` (no options except the host and remote command).
+The default auto-detection can be explicitly requested using the value
+`auto`. Any other value is treated as `ssh`. This setting can also be
+overridden via the environment variable `GIT_SSH_VARIANT`.
++
+The current command-line parameters used for each variant are as
+follows:
+
-The config variable `ssh.variant` can be set to override this auto-detection;
-valid values are `ssh`, `plink`, `putty` or `tortoiseplink`. Any other value
-will be treated as normal ssh. This setting can be overridden via the
-environment variable `GIT_SSH_VARIANT`.
+--
+
+* `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command
+
+* `simple` - [username@]host command
+
+* `plink` or `putty` - [-P port] [-4] [-6] [username@]host command
+
+* `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command
+
+--
++
+Except for the `simple` variant, command-line parameters are likely to
+change as git gains new features.
i18n.commitEncoding::
Character encoding the commit messages are stored in; Git itself
The configuration variables in the 'imap' section are described
in linkgit:git-imap-send[1].
+index.threads::
+ Specifies the number of threads to spawn when loading the index.
+ This is meant to reduce index load time on multiprocessor machines.
+ Specifying 0 or 'true' will cause Git to auto-detect the number of
+ CPU's and set the number of threads accordingly. Specifying 1 or
+ 'false' will disable multithreading. Defaults to 'true'.
+
index.version::
Specify the version with which new index files should be
initialized. This does not affect existing repositories.
pack.depth::
The maximum delta depth used by linkgit:git-pack-objects[1] when no
maximum depth is given on the command line. Defaults to 50.
+ Maximum value is 4095.
pack.windowMemory::
The maximum size of memory that is consumed by each thread
all existing objects. You can force recompression by passing the -F option
to linkgit:git-repack[1].
+pack.island::
+ An extended regular expression configuring a set of delta
+ islands. See "DELTA ISLANDS" in linkgit:git-pack-objects[1]
+ for details.
+
+pack.islandCore::
+ Specify an island name which gets to have its objects be
+ packed first. This creates a kind of pseudo-pack at the front
+ of one pack, so that the objects from the specified island are
+ hopefully faster to copy into any pack that should be served
+ to a user requesting these objects. In practice this means
+ that the island specified should likely correspond to what is
+ the most commonly cloned in the repo. See also "DELTA ISLANDS"
+ in linkgit:git-pack-objects[1].
+
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
linkgit:git-pack-objects[1] before writing them out to a pack.
The maximum size of a delta, that is cached in
linkgit:git-pack-objects[1]. This cache is used to speed up the
writing object phase by not having to recompute the final delta
- result once the best match for all objects is found. Defaults to 1000.
+ result once the best match for all objects is found.
+ Defaults to 1000. Maximum value is 65535.
pack.threads::
Specifies the number of threads to spawn when searching for best
`hg` to allow the `git-remote-hg` helper)
--
-pull.ff::
- By default, Git does not create an extra merge commit when merging
- a commit that is a descendant of the current commit. Instead, the
- tip of the current branch is fast-forwarded. When set to `false`,
- this variable tells Git to create an extra merge commit in such
- a case (equivalent to giving the `--no-ff` option from the command
- line). When set to `only`, only such fast-forward merges are
- allowed (equivalent to giving the `--ff-only` option from the
- command line). This setting overrides `merge.ff` when pulling.
-
-pull.rebase::
- When true, rebase branches on top of the fetched branch, instead
- of merging the default branch from the default remote when "git
- pull" is run. See "branch.<name>.rebase" for setting this on a
- per-branch basis.
-+
-When preserve, also pass `--preserve-merges` along to 'git rebase'
-so that locally committed merge commits will not be flattened
-by running 'git pull'.
-+
-When the value is `interactive`, the rebase is run in interactive mode.
-+
-*NOTE*: this is a possibly dangerous operation; do *not* use
-it unless you understand the implications (see linkgit:git-rebase[1]
-for details).
-
-pull.octopus::
- The default merge strategy to use when pulling multiple branches
- at once.
-
-pull.twohead::
- The default merge strategy to use when pulling a single branch.
-
-push.default::
- Defines the action `git push` should take if no refspec is
- explicitly given. Different values are well-suited for
- specific workflows; for instance, in a purely central workflow
- (i.e. the fetch source is equal to the push destination),
- `upstream` is probably what you want. Possible values are:
+protocol.version::
+ Experimental. If set, clients will attempt to communicate with a
+ server using the specified protocol version. If unset, no
+ attempt will be made by the client to communicate using a
+ particular protocol version, this results in protocol version 0
+ being used.
+ Supported versions:
+
--
-* `nothing` - do not push anything (error out) unless a refspec is
- explicitly given. This is primarily meant for people who want to
- avoid mistakes by always being explicit.
-
-* `current` - push the current branch to update a branch with the same
- name on the receiving end. Works in both central and non-central
- workflows.
-
-* `upstream` - push the current branch back to the branch whose
- changes are usually integrated into the current branch (which is
- called `@{upstream}`). This mode only makes sense if you are
- pushing to the same repository you would normally pull from
- (i.e. central workflow).
+* `0` - the original wire protocol.
-* `tracking` - This is a deprecated synonym for `upstream`.
-
-* `simple` - in centralized workflow, work like `upstream` with an
- added safety to refuse to push if the upstream branch's name is
- different from the local one.
-+
-When pushing to a remote that is different from the remote you normally
-pull from, work as `current`. This is the safest option and is suited
-for beginners.
-+
-This mode has become the default in Git 2.0.
+* `1` - the original wire protocol with the addition of a version string
+ in the initial response from the server.
-* `matching` - push all branches having the same name on both ends.
- This makes the repository you are pushing to remember the set of
- branches that will be pushed out (e.g. if you always push 'maint'
- and 'master' there and no other branches, the repository you push
- to will have these two branches, and your local 'maint' and
- 'master' will be pushed there).
-+
-To use this mode effectively, you have to make sure _all_ the
-branches you would push out are ready to be pushed out before
-running 'git push', as the whole point of this mode is to allow you
-to push all of the branches in one go. If you usually finish work
-on only one branch and push out the result, while other branches are
-unfinished, this mode is not for you. Also this mode is not
-suitable for pushing into a shared central repository, as other
-people may add new branches there, or update the tip of existing
-branches outside your control.
-+
-This used to be the default, but not since Git 2.0 (`simple` is the
-new default).
+* `2` - link:technical/protocol-v2.html[wire protocol version 2].
--
-push.followTags::
- If set to true enable `--follow-tags` option by default. You
- may override this configuration at time of push by specifying
- `--no-follow-tags`.
-
-push.gpgSign::
- May be set to a boolean value, or the string 'if-asked'. A true
- value causes all pushes to be GPG signed, as if `--signed` is
- passed to linkgit:git-push[1]. The string 'if-asked' causes
- pushes to be signed if the server supports it, as if
- `--signed=if-asked` is passed to 'git push'. A false value may
- override a value from a lower-priority config file. An explicit
- command-line flag always overrides this config option.
-
-push.recurseSubmodules::
- Make sure all submodule commits used by the revisions to be pushed
- are available on a remote-tracking branch. If the value is 'check'
- then Git will verify that all submodule commits that changed in the
- revisions to be pushed are available on at least one remote of the
- submodule. If any commits are missing, the push will be aborted and
- exit with non-zero status. If the value is 'on-demand' then all
- submodules that changed in the revisions to be pushed will be
- pushed. If on-demand was not able to push all necessary revisions
- it will also be aborted and exit with non-zero status. If the value
- is 'no' then default behavior of ignoring submodules when pushing
- is retained. You may override this configuration at time of push by
- specifying '--recurse-submodules=check|on-demand|no'.
-
-rebase.stat::
- Whether to show a diffstat of what changed upstream since the last
- rebase. False by default.
-
-rebase.autoSquash::
- If set to true enable `--autosquash` option by default.
-
-rebase.autoStash::
- When set to true, automatically create a temporary stash entry
- before the operation begins, and apply it after the operation
- ends. This means that you can run rebase on a dirty worktree.
- However, use with care: the final stash application after a
- successful rebase might result in non-trivial conflicts.
- Defaults to false.
+include::pull-config.txt[]
-rebase.missingCommitsCheck::
- If set to "warn", git rebase -i will print a warning if some
- commits are removed (e.g. a line was deleted), however the
- rebase will still proceed. If set to "error", it will print
- the previous warning and stop the rebase, 'git rebase
- --edit-todo' can then be used to correct the error. If set to
- "ignore", no checking is done.
- To drop a commit without warning or error, use the `drop`
- command in the todo-list.
- Defaults to "ignore".
-
-rebase.instructionFormat::
- A format string, as specified in linkgit:git-log[1], to be used for
- the instruction list during an interactive rebase. The format will automatically
- have the long commit hash prepended to the format.
-
-receive.advertiseAtomic::
- By default, git-receive-pack will advertise the atomic push
- capability to its clients. If you don't want to advertise this
- capability, set this variable to false.
-
-receive.advertisePushOptions::
- When set to true, git-receive-pack will advertise the push options
- capability to its clients. False by default.
-
-receive.autogc::
- By default, git-receive-pack will run "git-gc --auto" after
- receiving data from git-push and updating refs. You can stop
- it by setting this variable to false.
-
-receive.certNonceSeed::
- By setting this variable to a string, `git receive-pack`
- will accept a `git push --signed` and verifies it by using
- a "nonce" protected by HMAC using this string as a secret
- key.
-
-receive.certNonceSlop::
- When a `git push --signed` sent a push certificate with a
- "nonce" that was issued by a receive-pack serving the same
- repository within this many seconds, export the "nonce"
- found in the certificate to `GIT_PUSH_CERT_NONCE` to the
- hooks (instead of what the receive-pack asked the sending
- side to include). This may allow writing checks in
- `pre-receive` and `post-receive` a bit easier. Instead of
- checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable
- that records by how many seconds the nonce is stale to
- decide if they want to accept the certificate, they only
- can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`.
-
-receive.fsckObjects::
- If it is set to true, git-receive-pack will check all received
- objects. It will abort in the case of a malformed object or a
- broken link. The result of an abort are only dangling objects.
- Defaults to false. If not set, the value of `transfer.fsckObjects`
- is used instead.
-
-receive.fsck.<msg-id>::
- When `receive.fsckObjects` is set to true, errors can be switched
- to warnings and vice versa by configuring the `receive.fsck.<msg-id>`
- setting where the `<msg-id>` is the fsck message ID and the value
- is one of `error`, `warn` or `ignore`. For convenience, fsck prefixes
- the error/warning with the message ID, e.g. "missingEmail: invalid
- author/committer line - missing email" means that setting
- `receive.fsck.missingEmail = ignore` will hide that issue.
-+
-This feature is intended to support working with legacy repositories
-which would not pass pushing when `receive.fsckObjects = true`, allowing
-the host to accept repositories with certain known issues but still catch
-other issues.
-
-receive.fsck.skipList::
- The path to a sorted list of object names (i.e. one SHA-1 per
- line) that are known to be broken in a non-fatal way and should
- be ignored. This feature is useful when an established project
- should be accepted despite early commits containing errors that
- can be safely ignored such as invalid committer email addresses.
- Note: corrupt objects cannot be skipped with this setting.
-
-receive.keepAlive::
- After receiving the pack from the client, `receive-pack` may
- produce no output (if `--quiet` was specified) while processing
- the pack, causing some networks to drop the TCP connection.
- With this option set, if `receive-pack` does not transmit
- any data in this phase for `receive.keepAlive` seconds, it will
- send a short keepalive packet. The default is 5 seconds; set
- to 0 to disable keepalives entirely.
-
-receive.unpackLimit::
- If the number of objects received in a push is below this
- limit then the objects will be unpacked into loose object
- files. However if the number of received objects equals or
- exceeds this limit then the received pack will be stored as
- a pack, after adding any missing delta bases. Storing the
- pack from a push can make the push operation complete faster,
- especially on slow filesystems. If not set, the value of
- `transfer.unpackLimit` is used instead.
-
-receive.maxInputSize::
- If the size of the incoming pack stream is larger than this
- limit, then git-receive-pack will error out, instead of
- accepting the pack file. If not set or set to 0, then the size
- is unlimited.
-
-receive.denyDeletes::
- If set to true, git-receive-pack will deny a ref update that deletes
- the ref. Use this to prevent such a ref deletion via a push.
-
-receive.denyDeleteCurrent::
- If set to true, git-receive-pack will deny a ref update that
- deletes the currently checked out branch of a non-bare repository.
-
-receive.denyCurrentBranch::
- If set to true or "refuse", git-receive-pack will deny a ref update
- to the currently checked out branch of a non-bare repository.
- Such a push is potentially dangerous because it brings the HEAD
- out of sync with the index and working tree. If set to "warn",
- print a warning of such a push to stderr, but allow the push to
- proceed. If set to false or "ignore", allow such pushes with no
- message. Defaults to "refuse".
-+
-Another option is "updateInstead" which will update the working
-tree if pushing into the current branch. This option is
-intended for synchronizing working directories when one side is not easily
-accessible via interactive ssh (e.g. a live web site, hence the requirement
-that the working directory be clean). This mode also comes in handy when
-developing inside a VM to test and fix code on different Operating Systems.
-+
-By default, "updateInstead" will refuse the push if the working tree or
-the index have any difference from the HEAD, but the `push-to-checkout`
-hook can be used to customize this. See linkgit:githooks[5].
-
-receive.denyNonFastForwards::
- If set to true, git-receive-pack will deny a ref update which is
- not a fast-forward. Use this to prevent such an update via a push,
- even if that push is forced. This configuration variable is
- set when initializing a shared repository.
-
-receive.hideRefs::
- This variable is the same as `transfer.hideRefs`, but applies
- only to `receive-pack` (and so affects pushes, but not fetches).
- An attempt to update or delete a hidden ref by `git push` is
- rejected.
+include::push-config.txt[]
-receive.updateServerInfo::
- If set to true, git-receive-pack will run git-update-server-info
- after receiving data from git-push and updating refs.
+include::rebase-config.txt[]
-receive.shallowUpdate::
- If set to true, .git/shallow can be updated when new refs
- require new shallow roots. Otherwise those refs are rejected.
+include::receive-config.txt[]
remote.pushDefault::
The remote to push to by default. Overrides
remote (as if the `--prune` option was given on the command line).
Overrides `fetch.prune` settings, if any.
+remote.<name>.pruneTags::
+ When set to true, fetching from this remote by default will also
+ remove any local tags that no longer exist on the remote if pruning
+ is activated in general via `remote.<name>.prune`, `fetch.prune` or
+ `--prune`. Overrides `fetch.pruneTags` settings, if any.
++
+See also `remote.<name>.prune` and the PRUNING section of
+linkgit:git-fetch[1].
+
remotes.<group>::
The list of remotes which are fetched by "git remote update
<group>". See linkgit:git-remote[1].
index is being written (either via `--write-bitmap-index` or
`repack.writeBitmaps`).
+repack.useDeltaIslands::
+ If set to true, makes `git repack` act as if `--delta-islands`
+ was passed. Defaults to `false`.
+
repack.writeBitmaps::
When true, git will write a bitmap index when packing all
objects to disk (e.g., when `git repack -a` is run). This
`$GIT_DIR`, e.g. if "rerere" was previously used in the
repository.
-sendemail.identity::
- A configuration identity. When given, causes values in the
- 'sendemail.<identity>' subsection to take precedence over
- values in the 'sendemail' section. The default identity is
- the value of `sendemail.identity`.
-
-sendemail.smtpEncryption::
- See linkgit:git-send-email[1] for description. Note that this
- setting is not subject to the 'identity' mechanism.
-
-sendemail.smtpssl (deprecated)::
- Deprecated alias for 'sendemail.smtpEncryption = ssl'.
-
-sendemail.smtpsslcertpath::
- Path to ca-certificates (either a directory or a single file).
- Set it to an empty string to disable certificate verification.
-
-sendemail.<identity>.*::
- Identity-specific versions of the 'sendemail.*' parameters
- found below, taking precedence over those when this
- identity is selected, through either the command-line or
- `sendemail.identity`.
-
-sendemail.aliasesFile::
-sendemail.aliasFileType::
-sendemail.annotate::
-sendemail.bcc::
-sendemail.cc::
-sendemail.ccCmd::
-sendemail.chainReplyTo::
-sendemail.confirm::
-sendemail.envelopeSender::
-sendemail.from::
-sendemail.multiEdit::
-sendemail.signedoffbycc::
-sendemail.smtpPass::
-sendemail.suppresscc::
-sendemail.suppressFrom::
-sendemail.to::
-sendemail.smtpDomain::
-sendemail.smtpServer::
-sendemail.smtpServerPort::
-sendemail.smtpServerOption::
-sendemail.smtpUser::
-sendemail.thread::
-sendemail.transferEncoding::
-sendemail.validate::
-sendemail.xmailer::
- See linkgit:git-send-email[1] for description.
-
-sendemail.signedoffcc (deprecated)::
- Deprecated alias for `sendemail.signedoffbycc`.
-
-sendemail.smtpBatchSize::
- Number of messages to be sent per connection, after that a relogin
- will happen. If the value is 0 or undefined, send all messages in
- one connection.
- See also the `--batch-size` option of linkgit:git-send-email[1].
-
-sendemail.smtpReloginDelay::
- Seconds wait before reconnecting to smtp server.
- See also the `--relogin-delay` option of linkgit:git-send-email[1].
-
-showbranch.default::
+reset.quiet::
+ When set to true, 'git reset' will default to the '--quiet' option.
+
+include::sendemail-config.txt[]
+
+sequence.editor::
+ Text editor used by `git rebase -i` for editing the rebase instruction file.
+ The value is meant to be interpreted by the shell when it is used.
+ It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
+ When not configured the default commit message editor is used instead.
+
+showBranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
Defaults to false.
+status.renameLimit::
+ The number of files to consider when performing rename detection
+ in linkgit:git-status[1] and linkgit:git-commit[1]. Defaults to
+ the value of diff.renameLimit.
+
+status.renames::
+ Whether and how Git detects renames in linkgit:git-status[1] and
+ linkgit:git-commit[1] . If set to "false", rename detection is
+ disabled. If set to "true", basic rename detection is enabled.
+ If set to "copies" or "copy", Git will detect copies, as well.
+ Defaults to the value of diff.renames.
+
status.showStash::
If set to true, linkgit:git-status[1] will display the number of
entries currently stashed away.
option will show diffstat of the stash entry. Defaults to true.
See description of 'show' command in linkgit:git-stash[1].
-submodule.<name>.url::
- The URL for a submodule. This variable is copied from the .gitmodules
- file to the git config via 'git submodule init'. The user can change
- the configured URL before obtaining the submodule via 'git submodule
- update'. If neither submodule.<name>.active or submodule.active are
- set, the presence of this variable is used as a fallback to indicate
- whether the submodule is of interest to git commands.
- See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
-
-submodule.<name>.update::
- The method by which a submodule is updated by 'git submodule update',
- which is the only affected command, others such as
- 'git checkout --recurse-submodules' are unaffected. It exists for
- historical reasons, when 'git submodule' was the only command to
- interact with submodules; settings like `submodule.active`
- and `pull.rebase` are more specific. It is populated by
- `git submodule init` from the linkgit:gitmodules[5] file.
- See description of 'update' command in linkgit:git-submodule[1].
-
-submodule.<name>.branch::
- The remote branch name for a submodule, used by `git submodule
- update --remote`. Set this option to override the value found in
- the `.gitmodules` file. See linkgit:git-submodule[1] and
- linkgit:gitmodules[5] for details.
-
-submodule.<name>.fetchRecurseSubmodules::
- This option can be used to control recursive fetching of this
- submodule. It can be overridden by using the --[no-]recurse-submodules
- command-line option to "git fetch" and "git pull".
- This setting will override that from in the linkgit:gitmodules[5]
- file.
-
-submodule.<name>.ignore::
- Defines under what circumstances "git status" and the diff family show
- a submodule as modified. When set to "all", it will never be considered
- modified (but it will nonetheless show up in the output of status and
- commit when it has been staged), "dirty" will ignore all changes
- to the submodules work tree and
- takes only differences between the HEAD of the submodule and the commit
- recorded in the superproject into account. "untracked" will additionally
- let submodules with modified tracked files in their work tree show up.
- Using "none" (the default when this option is not set) also shows
- submodules that have untracked files in their work tree as changed.
- This setting overrides any setting made in .gitmodules for this submodule,
- both settings can be overridden on the command line by using the
- "--ignore-submodules" option. The 'git submodule' commands are not
- affected by this setting.
-
-submodule.<name>.active::
- Boolean value indicating if the submodule is of interest to git
- commands. This config option takes precedence over the
- submodule.active config option.
-
-submodule.active::
- A repeated field which contains a pathspec used to match against a
- submodule's path to determine if the submodule is of interest to git
- commands.
-
-submodule.recurse::
- Specifies if commands recurse into submodules by default. This
- applies to all commands that have a `--recurse-submodules` option.
- Defaults to false.
-
-submodule.fetchJobs::
- Specifies how many submodules are fetched/cloned at the same time.
- A positive integer allows up to that number of submodules fetched
- in parallel. A value of 0 will give some reasonable default.
- If unset, it defaults to 1.
-
-submodule.alternateLocation::
- Specifies how the submodules obtain alternates when submodules are
- cloned. Possible values are `no`, `superproject`.
- By default `no` is assumed, which doesn't add references. When the
- value is set to `superproject` the submodule to be cloned computes
- its alternates location relative to the superprojects alternate.
-
-submodule.alternateErrorStrategy::
- Specifies how to treat errors with the alternates for a submodule
- as computed via `submodule.alternateLocation`. Possible values are
- `ignore`, `info`, `die`. Default is `die`.
+include::submodule-config.txt[]
tag.forceSignAnnotated::
A boolean to specify whether annotated tags created should be GPG signed.
When `fetch.fsckObjects` or `receive.fsckObjects` are
not set, the value of this variable is used instead.
Defaults to false.
++
+When set, the fetch or receive will abort in the case of a malformed
+object or a link to a nonexistent object. In addition, various other
+issues are checked for, including legacy issues (see `fsck.<msg-id>`),
+and potential security issues like the existence of a `.GIT` directory
+or a malicious `.gitmodules` file (see the release notes for v2.2.1
+and v2.17.1 for details). Other sanity and security checks may be
+added in future releases.
++
+On the receiving side, failing fsckObjects will make those objects
+unreachable, see "QUARANTINE ENVIRONMENT" in
+linkgit:git-receive-pack[1]. On the fetch side, malformed objects will
+instead be left unreferenced in the repository.
++
+Due to the non-quarantine nature of the `fetch.fsckObjects`
+implementation it can not be relied upon to leave the object store
+clean like `receive.fsckObjects` can.
++
+As objects are unpacked they're written to the object store, so there
+can be cases where malicious objects get introduced even though the
+"fetch" failed, only to have a subsequent "fetch" succeed because only
+new incoming objects are checked, not those that have already been
+written to the object store. That difference in behavior should not be
+relied upon. In the future, such objects may be quarantined for
+"fetch" as well.
++
+For now, the paranoid need to find some way to emulate the quarantine
+environment if they'd like the same protection as "push". E.g. in the
+case of an internal mirror do the mirroring in two steps, one to fetch
+the untrusted objects, and then do a second "push" (which will use the
+quarantine) to another internal repo, and have internal clients
+consume this pushed-to repository, or embargo internal fetches and
+only allow them once a full "fsck" has run (and no new fetches have
+happened in the meantime).
transfer.hideRefs::
String(s) `receive-pack` and `upload-pack` use to decide which
If this option is set, `upload-pack` will support partial
clone and partial fetch object filtering.
+uploadpack.allowRefInWant::
+ If this option is set, `upload-pack` will support the `ref-in-want`
+ feature of the protocol version 2 `fetch` command. This feature
+ is intended for the benefit of load-balanced servers which may
+ not have the same view of what OIDs their refs point to due to
+ replication delay.
+
url.<base>.insteadOf::
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site serves a
Specify a web browser that may be used by some commands.
Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]
may use it.
+
+worktree.guessRemote::
+ With `add`, if no branch argument, and neither of `-b` nor
+ `-B` nor `--detach` are given, the command defaults to
+ creating a new branch from HEAD. If `worktree.guessRemote` is
+ set to true, `worktree add` tries to find a remote-tracking
+ branch whose name uniquely matches the new branch name. If
+ such a branch exists, it is checked out and set as "upstream"
+ for the new branch. If no such match can be found, it falls
+ back to creating a new branch from the current HEAD.