SYNOPSIS
--------
-'git-rev-parse' [ --option ] <args>...
+[verse]
+'git rev-parse' [ --option ] <args>...
DESCRIPTION
-----------
Many git porcelainish commands take mixture of flags
(i.e. parameters that begin with a dash '-') and parameters
-meant for underlying `git-rev-list` command they use internally
-and flags and parameters for other commands they use as the
-downstream of `git-rev-list`. This command is used to
+meant for the underlying 'git rev-list' command they use internally
+and flags and parameters for the other commands they use
+downstream of 'git rev-list'. This command is used to
distinguish between them.
OPTIONS
-------
--parseopt::
- Use `git-rev-parse` in option parsing mode (see PARSEOPT section below).
+ Use 'git rev-parse' in option parsing mode (see PARSEOPT section below).
---keep-dash-dash::
+--keep-dashdash::
Only meaningful in `--parseopt` mode. Tells the option parser to echo
out the first `--` met instead of skipping it.
+--stop-at-non-option::
+ Only meaningful in `--parseopt` mode. Lets the option parser stop at
+ the first non-option argument. This can be used to parse sub-commands
+ that take options themselves.
+
+--sq-quote::
+ Use 'git rev-parse' in shell quoting mode (see SQ-QUOTE
+ section below). In contrast to the `--sq` option below, this
+ mode does only quoting. Nothing else is done to command input.
+
--revs-only::
Do not output flags and parameters not meant for
- `git-rev-list` command.
+ 'git rev-list' command.
--no-revs::
Do not output flags and parameters meant for
- `git-rev-list` command.
+ 'git rev-list' command.
--flags::
Do not output non-flag parameters.
The parameter given must be usable as a single, valid
object name. Otherwise barf and abort.
+-q::
+--quiet::
+ Only meaningful in `--verify` mode. Do not output an error
+ message if the first argument is not a valid object name;
+ instead exit with non-zero status silently.
+
--sq::
Usually the output is made one line per flag and
parameter. This option makes output a single line,
properly quoted for consumption by shell. Useful when
you expect your parameter to contain whitespaces and
newlines (e.g. when using pickaxe `-S` with
- `git-diff-\*`).
+ 'git diff-{asterisk}'). In contrast to the `--sq-quote` option,
+ the command input is still interpreted as usual.
--not::
When showing object names, prefix them with '{caret}' and
unfortunately named tag "master"), and show them as full
refnames (e.g. "refs/heads/master").
---all::
- Show all refs found in `$GIT_DIR/refs`.
-
---branches::
- Show branch refs found in `$GIT_DIR/refs/heads`.
-
---tags::
- Show tag refs found in `$GIT_DIR/refs/tags`.
+--abbrev-ref[=(strict|loose)]::
+ A non-ambiguous short name of the objects name.
+ The option core.warnAmbiguousRefs is used to select the strict
+ abbreviation mode.
---remotes::
- Show tag refs found in `$GIT_DIR/refs/remotes`.
+--all::
+ Show all refs found in `refs/`.
+
+--branches[=pattern]::
+--tags[=pattern]::
+--remotes[=pattern]::
+ Show all branches, tags, or remote-tracking branches,
+ respectively (i.e., refs found in `refs/heads`,
+ `refs/tags`, or `refs/remotes`, respectively).
++
+If a `pattern` is given, only refs matching the given shell glob are
+shown. If the pattern does not contain a globbing character (`?`,
+`{asterisk}`, or `[`), it is turned into a prefix match by
+appending `/{asterisk}`.
+
+--glob=pattern::
+ Show all refs matching the shell glob pattern `pattern`. If
+ the pattern does not start with `refs/`, this is automatically
+ prepended. If the pattern does not contain a globbing
+ character (`?`, `{asterisk}`, or `[`), it is turned into a prefix
+ match by appending `/{asterisk}`.
+
+--show-toplevel::
+ Show the absolute path of the top-level directory.
--show-prefix::
When the command is invoked from a subdirectory, show the
directory (typically a sequence of "../", or an empty string).
--git-dir::
- Show `$GIT_DIR` if defined else show the path to the .git directory.
+ Show `$GIT_DIR` if defined. Otherwise show the path to
+ the .git directory, relative to the current directory.
++
+If `$GIT_DIR` is not defined and the current directory
+is not detected to lie in a git repository or work tree
+print a message to stderr and exit with nonzero status.
--is-inside-git-dir::
When the current working directory is below the repository
--is-bare-repository::
When the repository is bare print "true", otherwise "false".
---short, --short=number::
+--local-env-vars::
+ List the GIT_* environment variables that are local to the
+ repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR).
+ Only the names of the variables are listed, not their value,
+ even if they are set.
+
+--short::
+--short=number::
Instead of outputting the full SHA1 values of object names try to
abbreviate them to a shorter unique name. When no length is specified
7 is used. The minimum length is 4.
---since=datestring, --after=datestring::
- Parses the date string, and outputs corresponding
- --max-age= parameter for git-rev-list command.
+--since=datestring::
+--after=datestring::
+ Parse the date string, and output the corresponding
+ --max-age= parameter for 'git rev-list'.
---until=datestring, --before=datestring::
- Parses the date string, and outputs corresponding
- --min-age= parameter for git-rev-list command.
+--until=datestring::
+--before=datestring::
+ Parse the date string, and output the corresponding
+ --min-age= parameter for 'git rev-list'.
<args>...::
Flags and parameters to be parsed.
-SPECIFYING REVISIONS
---------------------
-
-A revision parameter typically, but not necessarily, names a
-commit object. They use what is called an 'extended SHA1'
-syntax. Here are various ways to spell object names. The
-ones listed near the end of this list are to name trees and
-blobs contained in a commit.
-
-* The full SHA1 object name (40-byte hexadecimal string), or
- a substring of such that is unique within the repository.
- E.g. dae86e1950b1277e545cee180551750029cfe735 and dae86e both
- name the same commit object if there are no other object in
- your repository whose object name starts with dae86e.
-
-* An output from `git-describe`; i.e. a closest tag, followed by a
- dash, a `g`, and an abbreviated object name.
-
-* A symbolic ref name. E.g. 'master' typically means the commit
- object referenced by $GIT_DIR/refs/heads/master. If you
- happen to have both heads/master and tags/master, you can
- explicitly say 'heads/master' to tell git which one you mean.
- When ambiguous, a `<name>` is disambiguated by taking the
- first match in the following rules:
-
- . if `$GIT_DIR/<name>` exists, that is what you mean (this is usually
- useful only for `HEAD`, `FETCH_HEAD` and `MERGE_HEAD`);
-
- . otherwise, `$GIT_DIR/refs/<name>` if exists;
-
- . otherwise, `$GIT_DIR/refs/tags/<name>` if exists;
-
- . otherwise, `$GIT_DIR/refs/heads/<name>` if exists;
-
- . otherwise, `$GIT_DIR/refs/remotes/<name>` if exists;
-
- . otherwise, `$GIT_DIR/refs/remotes/<name>/HEAD` if exists.
-
-* A ref followed by the suffix '@' with a date specification
- enclosed in a brace
- pair (e.g. '\{yesterday\}', '\{1 month 2 weeks 3 days 1 hour 1
- second ago\}' or '\{1979-02-26 18:30:00\}') to specify the value
- of the ref at a prior point in time. This suffix may only be
- used immediately following a ref name and the ref must have an
- existing log ($GIT_DIR/logs/<ref>).
-
-* A ref followed by the suffix '@' with an ordinal specification
- enclosed in a brace pair (e.g. '\{1\}', '\{15\}') to specify
- the n-th prior value of that ref. For example 'master@\{1\}'
- is the immediate prior value of 'master' while 'master@\{5\}'
- is the 5th prior value of 'master'. This suffix may only be used
- immediately following a ref name and the ref must have an existing
- log ($GIT_DIR/logs/<ref>).
-
-* You can use the '@' construct with an empty ref part to get at a
- reflog of the current branch. For example, if you are on the
- branch 'blabla', then '@\{1\}' means the same as 'blabla@\{1\}'.
-
-* A suffix '{caret}' to a revision parameter means the first parent of
- that commit object. '{caret}<n>' means the <n>th parent (i.e.
- 'rev{caret}'
- is equivalent to 'rev{caret}1'). As a special rule,
- 'rev{caret}0' means the commit itself and is used when 'rev' is the
- object name of a tag object that refers to a commit object.
-
-* A suffix '{tilde}<n>' to a revision parameter means the commit
- object that is the <n>th generation grand-parent of the named
- commit object, following only the first parent. I.e. rev~3 is
- equivalent to rev{caret}{caret}{caret} which is equivalent to
- rev{caret}1{caret}1{caret}1. See below for a illustration of
- the usage of this form.
-
-* A suffix '{caret}' followed by an object type name enclosed in
- brace pair (e.g. `v0.99.8{caret}\{commit\}`) means the object
- could be a tag, and dereference the tag recursively until an
- object of that type is found or the object cannot be
- dereferenced anymore (in which case, barf). `rev{caret}0`
- introduced earlier is a short-hand for `rev{caret}\{commit\}`.
-
-* A suffix '{caret}' followed by an empty brace pair
- (e.g. `v0.99.8{caret}\{\}`) means the object could be a tag,
- and dereference the tag recursively until a non-tag object is
- found.
-
-* A colon, followed by a slash, followed by a text: this names
- a commit whose commit message starts with the specified text.
- This name returns the youngest matching commit which is
- reachable from any ref. If the commit message starts with a
- '!', you have to repeat that; the special sequence ':/!',
- followed by something else than '!' is reserved for now.
-
-* A suffix ':' followed by a path; this names the blob or tree
- at the given path in the tree-ish object named by the part
- before the colon.
-
-* A colon, optionally followed by a stage number (0 to 3) and a
- colon, followed by a path; this names a blob object in the
- index at the given path. Missing stage number (and the colon
- that follows it) names an stage 0 entry. During a merge, stage
- 1 is the common ancestor, stage 2 is the target branch's version
- (typically the current branch), and stage 3 is the version from
- the branch being merged.
-
-Here is an illustration, by Jon Loeliger. Both node B and C are
-a commit parents of commit node A. Parent commits are ordered
-left-to-right.
-
- G H I J
- \ / \ /
- D E F
- \ | / \
- \ | / |
- \|/ |
- B C
- \ /
- \ /
- A
-
- A = = A^0
- B = A^ = A^1 = A~1
- C = A^2 = A^2
- D = A^^ = A^1^1 = A~2
- E = B^2 = A^^2
- F = B^3 = A^^3
- G = A^^^ = A^1^1^1 = A~3
- H = D^2 = B^^2 = A^^^2 = A~2^2
- I = F^ = B^3^ = A^^3^
- J = F^2 = B^3^2 = A^^3^2
-
-
-SPECIFYING RANGES
------------------
-
-History traversing commands such as `git-log` operate on a set
-of commits, not just a single commit. To these commands,
-specifying a single revision with the notation described in the
-previous section means the set of commits reachable from that
-commit, following the commit ancestry chain.
-
-To exclude commits reachable from a commit, a prefix `{caret}`
-notation is used. E.g. "`{caret}r1 r2`" means commits reachable
-from `r2` but exclude the ones reachable from `r1`.
-
-This set operation appears so often that there is a shorthand
-for it. "`r1..r2`" is equivalent to "`{caret}r1 r2`". It is
-the difference of two sets (subtract the set of commits
-reachable from `r1` from the set of commits reachable from
-`r2`).
-
-A similar notation "`r1\...r2`" is called symmetric difference
-of `r1` and `r2` and is defined as
-"`r1 r2 --not $(git-merge-base --all r1 r2)`".
-It is the set of commits that are reachable from either one of
-`r1` or `r2` but not from both.
-
-Two other shorthands for naming a set that is formed by a commit
-and its parent commits exists. `r1{caret}@` notation means all
-parents of `r1`. `r1{caret}!` includes commit `r1` but excludes
-its all parents.
-
-Here are a handful examples:
-
- D G H D
- D F G H I J D F
- ^G D H D
- ^D B E I J F B
- B...C G H D E B C
- ^D B C E I J F B C
- C^@ I J F
- F^! D G H D F
+include::revisions.txt[]
PARSEOPT
--------
-In `--parseopt` mode, `git-rev-parse` helps massaging options to bring to shell
+In `--parseopt` mode, 'git rev-parse' helps massaging options to bring to shell
scripts the same facilities C builtins have. It works as an option normalizer
(e.g. splits single switches aggregate values), a bit like `getopt(1)` does.
It takes on the standard input the specification of the options to parse and
-understand, and echoes on the standard output a line suitable for `sh(1)` `eval`
+understand, and echoes on the standard output a string suitable for `sh(1)` `eval`
to replace the arguments with normalized ones. In case of error, it outputs
usage on the standard error stream, and exits with code 129.
+Note: Make sure you quote the result when passing it to `eval`. See
+below for an example.
+
Input Format
~~~~~~~~~~~~
-`git-rev-parse --parseopt` input format is fully text based. It has two parts,
+'git rev-parse --parseopt' input format is fully text based. It has two parts,
separated by a line that contains only `--`. The lines before the separator
(should be more than one) are used for the usage.
The lines after the separator describe the options.
Each line of options has this format:
------------
-<opt_spec><arg_spec>? SP+ help LF
+<opt_spec><flags>* SP+ help LF
------------
`<opt_spec>`::
is necessary. `h,help`, `dry-run` and `f` are all three correct
`<opt_spec>`.
-`<arg_spec>`::
- an `<arg_spec>` tells the option parser if the option has an argument
- (`=`), an optional one (`?` though its use is discouraged) or none
- (no `<arg_spec>` in that case).
+`<flags>`::
+ `<flags>` are of `*`, `=`, `?` or `!`.
+ * Use `=` if the option takes an argument.
+
+ * Use `?` to mean that the option is optional (though its use is discouraged).
+
+ * Use `*` to mean that this option should not be listed in the usage
+ generated for the `-h` argument. It's shown for `--help-all` as
+ documented in linkgit:gitcli[7].
+
+ * Use `!` to not make the corresponding negated long option available.
The remainder of the line, after stripping the spaces, is used
as the help associated to the option.
An option group Header
C? option C with an optional argument"
-eval `echo "$OPTS_SPEC" | git-rev-parse --parseopt -- "$@" || echo exit $?`
+eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
+------------
+
+SQ-QUOTE
+--------
+
+In `--sq-quote` mode, 'git rev-parse' echoes on the standard output a
+single line suitable for `sh(1)` `eval`. This line is made by
+normalizing the arguments following `--sq-quote`. Nothing other than
+quoting the arguments is done.
+
+If you want command input to still be interpreted as usual by
+'git rev-parse' before the output is shell quoted, see the `--sq`
+option.
+
+Example
+~~~~~~~
+
+------------
+$ cat >your-git-script.sh <<\EOF
+#!/bin/sh
+args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments
+command="git frotz -n24 $args" # and use it inside a handcrafted
+ # command line
+eval "$command"
+EOF
+
+$ sh your-git-script.sh "a b'c"
------------
+EXAMPLES
+--------
-Author
-------
-Written by Linus Torvalds <torvalds@osdl.org> .
-Junio C Hamano <junkio@cox.net> and Pierre Habouzit <madcoder@debian.org>
+* Print the object name of the current commit:
++
+------------
+$ git rev-parse --verify HEAD
+------------
-Documentation
---------------
-Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
+* Print the commit object name from the revision in the $REV shell variable:
++
+------------
+$ git rev-parse --verify $REV
+------------
++
+This will error out if $REV is empty or not a valid revision.
+
+* Same as above:
++
+------------
+$ git rev-parse --default master --verify $REV
+------------
++
+but if $REV is empty, the commit object name from master will be printed.
GIT
---
-Part of the linkgit:git[7] suite
+Part of the linkgit:git[1] suite