SYNOPSIS
--------
+[verse]
frontend | 'git fast-import' [options]
DESCRIPTION
set of marks. If a mark is defined to different values,
the last file wins.
+--import-marks-if-exists=<file>::
+ Like --import-marks but instead of erroring out, silently
+ skips the file if it does not exist.
+
--relative-marks::
- After specifying --relative-marks= the paths specified
+ After specifying --relative-marks the paths specified
with --import-marks= and --export-marks= are relative
to an internal directory in the current repository.
In git-fast-import this means that the paths are relative
--no-relative-marks::
Negates a previous --relative-marks. Allows for combining
relative and non-relative marks by interweaving
- --(no-)-relative-marks= with the --(import|export)-marks=
+ --(no-)-relative-marks with the --(import|export)-marks=
options.
+--cat-blob-fd=<fd>::
+ Specify the file descriptor that will be written to
+ when the `cat-blob` command is encountered in the stream.
+ The default behaviour is to write to `stdout`.
+
+--done::
+ Require a `done` command at the end of the stream.
+ This option might be useful for detecting errors that
+ cause the frontend to terminate before it has started to
+ write a stream.
+
--export-pack-edges=<file>::
After creating a packfile, print a line of data to
<file> listing the filename of the packfile and the last
Ruby is being used.
fast-import is very strict about its input. Where we say SP below we mean
-*exactly* one space. Likewise LF means one (and only one) linefeed.
+*exactly* one space. Likewise LF means one (and only one) linefeed
+and HT one (and only one) horizontal tab.
Supplying additional whitespace characters will cause unexpected
results, such as branch names or file names with leading or trailing
spaces in their name, or early termination of fast-import when it encounters
standard output. This command is optional and is not needed
to perform an import.
+`done`::
+ Marks the end of the stream. This command is optional
+ unless the `done` feature was requested using the
+ `--done` command line option or `feature done` command.
+
+`cat-blob`::
+ Causes fast-import to print a blob in 'cat-file --batch'
+ format to the file descriptor set with `--cat-blob-fd` or
+ `stdout` if unspecified.
+
+`ls`::
+ Causes fast-import to print a line describing a directory
+ entry in 'ls-tree' format to the file descriptor set with
+ `--cat-blob-fd` or `stdout` if unspecified.
+
`feature`::
Require that fast-import supports the specified feature, or
abort if it does not.
(``cm@example.com''). `LT` and `GT` are the literal less-than (\x3c)
and greater-than (\x3e) symbols. These are required to delimit
the email address from the other fields in the line. Note that
-`<name>` is free-form and may contain any sequence of bytes, except
-`LT` and `LF`. It is typically UTF-8 encoded.
+`<name>` and `<email>` are free-form and may contain any sequence
+of bytes, except `LT`, `GT` and `LF`. `<name>` is typically UTF-8 encoded.
The time of the change is specified by `<when>` using the date format
that was selected by the \--date-format=<fmt> command line option.
* contain the special component `.` or `..` (e.g. `foo/./bar` and
`foo/../bar` are invalid).
+The root of the tree can be represented by an empty string as `<path>`.
+
It is recommended that `<path>` always be encoded using UTF-8.
`filedelete`
`notemodify`
^^^^^^^^^^^^
-Included in a `commit` command to add a new note (annotating a given
-commit) or change the content of an existing note. This command has
-two different means of specifying the content of the note.
+Included in a `commit` `<notes_ref>` command to add a new note
+annotating a `<committish>` or change this annotation contents.
+Internally it is similar to filemodify 100644 on `<committish>`
+path (maybe split into subdirectories). It's not advised to
+use any other commands to write to the `<notes_ref>` tree except
+`filedeleteall` to delete all existing notes in this tree.
+This command has two different means of specifying the content
+of the note.
External data format::
The data content for the note was already supplied by a prior
inform the reader when the `checkpoint` has been completed and it
can safely access the refs that fast-import updated.
+`cat-blob`
+~~~~~~~~~~
+Causes fast-import to print a blob to a file descriptor previously
+arranged with the `--cat-blob-fd` argument. The command otherwise
+has no impact on the current import; its main purpose is to
+retrieve blobs that may be in fast-import's memory but not
+accessible from the target repository.
+
+....
+ 'cat-blob' SP <dataref> LF
+....
+
+The `<dataref>` can be either a mark reference (`:<idnum>`)
+set previously or a full 40-byte SHA-1 of a Git blob, preexisting or
+ready to be written.
+
+Output uses the same format as `git cat-file --batch`:
+
+====
+ <sha1> SP 'blob' SP <size> LF
+ <contents> LF
+====
+
+This command can be used anywhere in the stream that comments are
+accepted. In particular, the `cat-blob` command can be used in the
+middle of a commit but not in the middle of a `data` command.
+
+`ls`
+~~~~
+Prints information about the object at a path to a file descriptor
+previously arranged with the `--cat-blob-fd` argument. This allows
+printing a blob from the active commit (with `cat-blob`) or copying a
+blob or tree from a previous commit for use in the current one (with
+`filemodify`).
+
+The `ls` command can be used anywhere in the stream that comments are
+accepted, including the middle of a commit.
+
+Reading from the active commit::
+ This form can only be used in the middle of a `commit`.
+ The path names a directory entry within fast-import's
+ active commit. The path must be quoted in this case.
++
+....
+ 'ls' SP <path> LF
+....
+
+Reading from a named tree::
+ The `<dataref>` can be a mark reference (`:<idnum>`) or the
+ full 40-byte SHA-1 of a Git tag, commit, or tree object,
+ preexisting or waiting to be written.
+ The path is relative to the top level of the tree
+ named by `<dataref>`.
++
+....
+ 'ls' SP <dataref> SP <path> LF
+....
+
+See `filemodify` above for a detailed description of `<path>`.
+
+Output uses the same format as `git ls-tree <tree> {litdd} <path>`:
+
+====
+ <mode> SP ('blob' | 'tree' | 'commit') SP <dataref> HT <path> LF
+====
+
+The <dataref> represents the blob, tree, or commit object at <path>
+and can be used in later 'cat-blob', 'filemodify', or 'ls' commands.
+
+If there is no file or subtree at that path, 'git fast-import' will
+instead report
+
+====
+ missing SP <path> LF
+====
+
`feature`
~~~~~~~~~
Require that fast-import supports the specified feature, or abort if
(see OPTIONS, above).
import-marks::
+import-marks-if-exists::
Like --import-marks except in two respects: first, only one
- "feature import-marks" command is allowed per stream;
- second, an --import-marks= command-line option overrides
- any "feature import-marks" command in the stream.
+ "feature import-marks" or "feature import-marks-if-exists"
+ command is allowed per stream; second, an --import-marks=
+ or --import-marks-if-exists command-line option overrides
+ any of these "feature" commands in the stream; third,
+ "feature import-marks-if-exists" like a corresponding
+ command-line option silently skips a nonexistent file.
+
+cat-blob::
+ls::
+ Require that the backend support the 'cat-blob' or 'ls' command.
+ Versions of fast-import not supporting the specified command
+ will exit with a message indicating so.
+ This lets the import error out early with a clear message,
+ rather than wasting time on the early part of an import
+ before the unsupported command is detected.
notes::
Require that the backend support the 'notemodify' (N)
Versions of fast-import not supporting notes will exit
with a message indicating so.
+done::
+ Error out if the stream ends without a 'done' command.
+ Without this feature, errors causing the frontend to end
+ abruptly at a convenient point in the stream can go
+ undetected.
+
`option`
~~~~~~~~
Processes the specified option so that git fast-import behaves in a
* date-format
* import-marks
* export-marks
+* cat-blob-fd
* force
+`done`
+~~~~~~
+If the `done` feature is not in use, treated as if EOF was read.
+This can be used to tell fast-import to finish early.
+
+If the `--done` command line option or `feature done` command is
+in use, the `done` command is mandatory and marks the end of the
+stream.
+
Crash Reports
-------------
If fast-import is supplied invalid input it will terminate with a
projects with 2,000+ branches and 45,114+ files in a very limited
memory footprint (less than 2.7 MiB per active branch).
-
-Author
-------
-Written by Shawn O. Pearce <spearce@spearce.org>.
-
-Documentation
---------------
-Documentation by Shawn O. Pearce <spearce@spearce.org>.
+Signals
+-------
+Sending *SIGUSR1* to the 'git fast-import' process ends the current
+packfile early, simulating a `checkpoint` command. The impatient
+operator can use this facility to peek at the objects and refs from an
+import in progress, at the cost of some added running time and worse
+compression.
GIT
---