if (normalize_path_copy(sanitized, sanitized))
goto error_out;
if (is_absolute_path(orig)) {
- size_t len, total;
+ size_t root_len, len, total;
const char *work_tree = get_git_work_tree();
if (!work_tree)
goto error_out;
len = strlen(work_tree);
+ root_len = offset_1st_component(work_tree);
total = strlen(sanitized) + 1;
if (strncmp(sanitized, work_tree, len) ||
- (sanitized[len] != '\0' && sanitized[len] != '/')) {
+ (len > root_len && sanitized[len] != '\0' && sanitized[len] != '/')) {
error_out:
die("'%s' is outside repository", orig);
}
{
static char path[PATH_MAX];
#ifndef WIN32
- if (!pfx || !*pfx || is_absolute_path(arg))
+ if (!pfx_len || is_absolute_path(arg))
return arg;
memcpy(path, pfx, pfx_len);
strcpy(path + pfx_len, arg);
/* don't add prefix to absolute paths, but still replace '\' by '/' */
if (is_absolute_path(arg))
pfx_len = 0;
- else
+ else if (pfx_len)
memcpy(path, pfx, pfx_len);
strcpy(path + pfx_len, arg);
for (p = path + pfx_len; *p; p++)
return path;
}
+int check_filename(const char *prefix, const char *arg)
+{
+ const char *name;
+ struct stat st;
+
+ name = prefix ? prefix_filename(prefix, strlen(prefix), arg) : arg;
+ if (!lstat(name, &st))
+ return 1; /* file exists */
+ if (errno == ENOENT || errno == ENOTDIR)
+ return 0; /* file does not exist */
+ die_errno("failed to stat '%s'", arg);
+}
+
+static void NORETURN die_verify_filename(const char *prefix, const char *arg)
+{
+ unsigned char sha1[20];
+ unsigned mode;
+ /* try a detailed diagnostic ... */
+ get_sha1_with_mode_1(arg, sha1, &mode, 0, prefix);
+ /* ... or fall back the most general message. */
+ die("ambiguous argument '%s': unknown revision or path not in the working tree.\n"
+ "Use '--' to separate paths from revisions", arg);
+
+}
+
/*
* Verify a filename that we got as an argument for a pathspec
* entry. Note that a filename that begins with "-" never verifies
*/
void verify_filename(const char *prefix, const char *arg)
{
- const char *name;
- struct stat st;
-
if (*arg == '-')
die("bad flag '%s' used after filename", arg);
- name = prefix ? prefix_filename(prefix, strlen(prefix), arg) : arg;
- if (!lstat(name, &st))
+ if (check_filename(prefix, arg))
return;
- if (errno == ENOENT)
- die("ambiguous argument '%s': unknown revision or path not in the working tree.\n"
- "Use '--' to separate paths from revisions", arg);
- die_errno("failed to stat '%s'", arg);
+ die_verify_filename(prefix, arg);
}
/*
*/
void verify_non_filename(const char *prefix, const char *arg)
{
- const char *name;
- struct stat st;
-
if (!is_inside_work_tree() || is_inside_git_dir())
return;
if (*arg == '-')
return; /* flag */
- name = prefix ? prefix_filename(prefix, strlen(prefix), arg) : arg;
- if (!lstat(name, &st))
- die("ambiguous argument '%s': both revision and filename\n"
- "Use '--' to separate filenames from revisions", arg);
- if (errno != ENOENT && errno != ENOTDIR)
- die_errno("failed to stat '%s'", arg);
+ if (!check_filename(prefix, arg))
+ return;
+ die("ambiguous argument '%s': both revision and filename\n"
+ "Use '--' to separate filenames from revisions", arg);
}
const char **get_pathspec(const char *prefix, const char **pathspec)
}
/*
- * set_work_tree() is only ever called if you set GIT_DIR explicitely.
+ * set_work_tree() is only ever called if you set GIT_DIR explicitly.
* The old behaviour (which we retain here) is to set the work tree root
* to the cwd, unless overridden by the config, the command line, or
* GIT_WORK_TREE.
const char *read_gitfile_gently(const char *path)
{
char *buf;
+ char *dir;
+ const char *slash;
struct stat st;
int fd;
size_t len;
if (len < 9)
die("No path in gitfile: %s", path);
buf[len] = '\0';
- if (!is_git_directory(buf + 8))
- die("Not a git repository: %s", buf + 8);
- path = make_absolute_path(buf + 8);
+ dir = buf + 8;
+
+ if (!is_absolute_path(dir) && (slash = strrchr(path, '/'))) {
+ size_t pathlen = slash+1 - path;
+ size_t dirlen = pathlen + len - 8;
+ dir = xmalloc(dirlen + 1);
+ strncpy(dir, path, pathlen);
+ strncpy(dir + pathlen, buf + 8, len - 8);
+ dir[dirlen] = '\0';
+ free(buf);
+ buf = dir;
+ }
+
+ if (!is_git_directory(dir))
+ die("Not a git repository: %s", dir);
+ path = make_absolute_path(dir);
+
free(buf);
return path;
}
+static const char *setup_explicit_git_dir(const char *gitdirenv,
+ const char *work_tree_env, int *nongit_ok)
+{
+ static char buffer[1024 + 1];
+ const char *retval;
+
+ if (PATH_MAX - 40 < strlen(gitdirenv))
+ die("'$%s' too big", GIT_DIR_ENVIRONMENT);
+ if (!is_git_directory(gitdirenv)) {
+ if (nongit_ok) {
+ *nongit_ok = 1;
+ return NULL;
+ }
+ die("Not a git repository: '%s'", gitdirenv);
+ }
+ if (!work_tree_env) {
+ retval = set_work_tree(gitdirenv);
+ /* config may override worktree */
+ if (check_repository_format_gently(nongit_ok))
+ return NULL;
+ return retval;
+ }
+ if (check_repository_format_gently(nongit_ok))
+ return NULL;
+ retval = get_relative_cwd(buffer, sizeof(buffer) - 1,
+ get_git_work_tree());
+ if (!retval || !*retval)
+ return NULL;
+ set_git_dir(make_absolute_path(gitdirenv));
+ if (chdir(work_tree_env) < 0)
+ die_errno ("Could not chdir to '%s'", work_tree_env);
+ strcat(buffer, "/");
+ return retval;
+}
+
+static int cwd_contains_git_dir(const char **gitfile_dirp)
+{
+ const char *gitfile_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
+ *gitfile_dirp = gitfile_dir;
+ if (gitfile_dir) {
+ if (set_git_dir(gitfile_dir))
+ die("Repository setup failed");
+ return 1;
+ }
+ return is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT);
+}
+
+static const char *setup_discovered_git_dir(const char *work_tree_env,
+ int offset, int len, char *cwd, int *nongit_ok)
+{
+ int root_len;
+
+ inside_git_dir = 0;
+ if (!work_tree_env)
+ inside_work_tree = 1;
+ root_len = offset_1st_component(cwd);
+ git_work_tree_cfg = xstrndup(cwd, offset > root_len ? offset : root_len);
+ if (check_repository_format_gently(nongit_ok))
+ return NULL;
+ if (offset == len)
+ return NULL;
+
+ /* Make "offset" point to past the '/', and add a '/' at the end */
+ offset++;
+ cwd[len++] = '/';
+ cwd[len] = 0;
+ return cwd + offset;
+}
+
+static const char *setup_bare_git_dir(const char *work_tree_env,
+ int offset, int len, char *cwd, int *nongit_ok)
+{
+ int root_len;
+
+ inside_git_dir = 1;
+ if (!work_tree_env)
+ inside_work_tree = 0;
+ if (offset != len) {
+ if (chdir(cwd))
+ die_errno("Cannot come back to cwd");
+ root_len = offset_1st_component(cwd);
+ cwd[offset > root_len ? offset : root_len] = '\0';
+ set_git_dir(cwd);
+ } else
+ set_git_dir(".");
+ check_repository_format_gently(nongit_ok);
+ return NULL;
+}
+
+static const char *setup_nongit(const char *cwd, int *nongit_ok)
+{
+ if (!nongit_ok)
+ die("Not a git repository (or any of the parent directories): %s", DEFAULT_GIT_DIR_ENVIRONMENT);
+ if (chdir(cwd))
+ die_errno("Cannot come back to cwd");
+ *nongit_ok = 1;
+ return NULL;
+}
+
+static dev_t get_device_or_die(const char *path, const char *prefix)
+{
+ struct stat buf;
+ if (stat(path, &buf))
+ die_errno("failed to stat '%s%s%s'",
+ prefix ? prefix : "",
+ prefix ? "/" : "", path);
+ return buf.st_dev;
+}
+
/*
* We cannot decide in this function whether we are in the work tree or
* not, since the config can only be read _after_ this function was called.
*/
-const char *setup_git_directory_gently(int *nongit_ok)
+static const char *setup_git_directory_gently_1(int *nongit_ok)
{
const char *work_tree_env = getenv(GIT_WORK_TREE_ENVIRONMENT);
const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT);
const char *gitdirenv;
const char *gitfile_dir;
int len, offset, ceil_offset;
+ dev_t current_device = 0;
+ int one_filesystem = 1;
/*
* Let's assume that we are in a git repository.
* validation.
*/
gitdirenv = getenv(GIT_DIR_ENVIRONMENT);
- if (gitdirenv) {
- if (PATH_MAX - 40 < strlen(gitdirenv))
- die("'$%s' too big", GIT_DIR_ENVIRONMENT);
- if (is_git_directory(gitdirenv)) {
- static char buffer[1024 + 1];
- const char *retval;
-
- if (!work_tree_env) {
- retval = set_work_tree(gitdirenv);
- /* config may override worktree */
- if (check_repository_format_gently(nongit_ok))
- return NULL;
- return retval;
- }
- if (check_repository_format_gently(nongit_ok))
- return NULL;
- retval = get_relative_cwd(buffer, sizeof(buffer) - 1,
- get_git_work_tree());
- if (!retval || !*retval)
- return NULL;
- set_git_dir(make_absolute_path(gitdirenv));
- if (chdir(work_tree_env) < 0)
- die_errno ("Could not chdir to '%s'", work_tree_env);
- strcat(buffer, "/");
- return retval;
- }
- if (nongit_ok) {
- *nongit_ok = 1;
- return NULL;
- }
- die("Not a git repository: '%s'", gitdirenv);
- }
+ if (gitdirenv)
+ return setup_explicit_git_dir(gitdirenv, work_tree_env, nongit_ok);
if (!getcwd(cwd, sizeof(cwd)-1))
die_errno("Unable to read current working directory");
* etc.
*/
offset = len = strlen(cwd);
+ one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0);
+ if (one_filesystem)
+ current_device = get_device_or_die(".", NULL);
for (;;) {
- gitfile_dir = read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
- if (gitfile_dir) {
- if (set_git_dir(gitfile_dir))
- die("Repository setup failed");
- break;
- }
- if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT))
- break;
- if (is_git_directory(".")) {
- inside_git_dir = 1;
- if (!work_tree_env)
- inside_work_tree = 0;
- if (offset != len) {
- cwd[offset] = '\0';
- setenv(GIT_DIR_ENVIRONMENT, cwd, 1);
- } else
- setenv(GIT_DIR_ENVIRONMENT, ".", 1);
- check_repository_format_gently(nongit_ok);
- return NULL;
- }
+ if (cwd_contains_git_dir(&gitfile_dir))
+ return setup_discovered_git_dir(work_tree_env, offset,
+ len, cwd, nongit_ok);
+ if (is_git_directory("."))
+ return setup_bare_git_dir(work_tree_env, offset,
+ len, cwd, nongit_ok);
while (--offset > ceil_offset && cwd[offset] != '/');
- if (offset <= ceil_offset) {
- if (nongit_ok) {
- if (chdir(cwd))
- die_errno("Cannot come back to cwd");
- *nongit_ok = 1;
- return NULL;
+ if (offset <= ceil_offset)
+ return setup_nongit(cwd, nongit_ok);
+ if (one_filesystem) {
+ dev_t parent_device = get_device_or_die("..", cwd);
+ if (parent_device != current_device) {
+ if (nongit_ok) {
+ if (chdir(cwd))
+ die_errno("Cannot come back to cwd");
+ *nongit_ok = 1;
+ return NULL;
+ }
+ cwd[offset] = '\0';
+ die("Not a git repository (or any parent up to mount parent %s)\n"
+ "Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).", cwd);
}
- die("Not a git repository (or any of the parent directories): %s", DEFAULT_GIT_DIR_ENVIRONMENT);
}
- if (chdir(".."))
+ if (chdir("..")) {
+ cwd[offset] = '\0';
die_errno("Cannot change to '%s/..'", cwd);
+ }
}
+}
- inside_git_dir = 0;
- if (!work_tree_env)
- inside_work_tree = 1;
- git_work_tree_cfg = xstrndup(cwd, offset);
- if (check_repository_format_gently(nongit_ok))
- return NULL;
- if (offset == len)
- return NULL;
+const char *setup_git_directory_gently(int *nongit_ok)
+{
+ const char *prefix;
- /* Make "offset" point to past the '/', and add a '/' at the end */
- offset++;
- cwd[len++] = '/';
- cwd[len] = 0;
- return cwd + offset;
+ prefix = setup_git_directory_gently_1(nongit_ok);
+ if (startup_info) {
+ startup_info->have_repository = !nongit_ok || !*nongit_ok;
+ startup_info->prefix = prefix;
+ }
+ return prefix;
}
int git_config_perm(const char *var, const char *value)
return check_repository_format_gently(NULL);
}
+/*
+ * Returns the "prefix", a path to the current working directory
+ * relative to the work tree root, or NULL, if the current working
+ * directory is not a strict subdirectory of the work tree root. The
+ * prefix always ends with a '/' character.
+ */
const char *setup_git_directory(void)
{
const char *retval = setup_git_directory_gently(NULL);