#!/bin/sh
# git-mergetool--lib is a library for common merge tool functions
+
+: ${MERGE_TOOLS_DIR=$(git --exec-path)/mergetools}
+
+mode_ok () {
+ if diff_mode
+ then
+ can_diff
+ elif merge_mode
+ then
+ can_merge
+ else
+ false
+ fi
+}
+
+is_available () {
+ merge_tool_path=$(translate_merge_tool_path "$1") &&
+ type "$merge_tool_path" >/dev/null 2>&1
+}
+
+list_config_tools () {
+ section=$1
+ line_prefix=${2:-}
+
+ git config --get-regexp $section'\..*\.cmd' |
+ while read -r key value
+ do
+ toolname=${key#$section.}
+ toolname=${toolname%.cmd}
+
+ printf "%s%s\n" "$line_prefix" "$toolname"
+ done
+}
+
+show_tool_names () {
+ condition=${1:-true} per_line_prefix=${2:-} preamble=${3:-}
+ not_found_msg=${4:-}
+ extra_content=${5:-}
+
+ shown_any=
+ ( cd "$MERGE_TOOLS_DIR" && ls ) | {
+ while read toolname
+ do
+ if setup_tool "$toolname" 2>/dev/null &&
+ (eval "$condition" "$toolname")
+ then
+ if test -n "$preamble"
+ then
+ printf "%s\n" "$preamble"
+ preamble=
+ fi
+ shown_any=yes
+ printf "%s%s\n" "$per_line_prefix" "$toolname"
+ fi
+ done
+
+ if test -n "$extra_content"
+ then
+ if test -n "$preamble"
+ then
+ # Note: no '\n' here since we don't want a
+ # blank line if there is no initial content.
+ printf "%s" "$preamble"
+ preamble=
+ fi
+ shown_any=yes
+ printf "\n%s\n" "$extra_content"
+ fi
+
+ if test -n "$preamble" && test -n "$not_found_msg"
+ then
+ printf "%s\n" "$not_found_msg"
+ fi
+
+ test -n "$shown_any"
+ }
+}
+
diff_mode() {
test "$TOOL_MODE" = diff
}
fi
}
-valid_tool_config () {
- if test -n "$(get_merge_tool_cmd "$1")"
- then
- return 0
- else
- return 1
- fi
-}
-
valid_tool () {
- setup_tool "$1" || valid_tool_config "$1"
+ setup_tool "$1" && return 0
+ cmd=$(get_merge_tool_cmd "$1")
+ test -n "$cmd"
}
setup_tool () {
- case "$1" in
- vim*|gvim*)
- tool=vim
- ;;
- *)
- tool="$1"
- ;;
- esac
- mergetools="$(git --exec-path)/mergetools"
+ tool="$1"
+
+ # Fallback definitions, to be overriden by tools.
+ can_merge () {
+ return 0
+ }
+
+ can_diff () {
+ return 0
+ }
+
+ diff_cmd () {
+ status=1
+ return $status
+ }
- # Load the default definitions
- . "$mergetools/defaults"
- if ! test -f "$mergetools/$tool"
+ merge_cmd () {
+ status=1
+ return $status
+ }
+
+ translate_merge_tool_path () {
+ echo "$1"
+ }
+
+ if ! test -f "$MERGE_TOOLS_DIR/$tool"
then
- return 1
+ # Use a special return code for this case since we want to
+ # source "defaults" even when an explicit tool path is
+ # configured since the user can use that to override the
+ # default path in the scriptlet.
+ return 2
fi
# Load the redefined functions
- . "$mergetools/$tool"
+ . "$MERGE_TOOLS_DIR/$tool"
if merge_mode && ! can_merge
then
echo "error: '$tool' can not be used to resolve merges" >&2
- exit 1
+ return 1
elif diff_mode && ! can_diff
then
echo "error: '$tool' can only be used to resolve merges" >&2
- exit 1
+ return 1
fi
return 0
}
get_merge_tool_cmd () {
- # Prints the custom command for a merge tool
merge_tool="$1"
if diff_mode
then
- echo "$(git config difftool.$merge_tool.cmd ||
- git config mergetool.$merge_tool.cmd)"
+ git config "difftool.$merge_tool.cmd" ||
+ git config "mergetool.$merge_tool.cmd"
else
- echo "$(git config mergetool.$merge_tool.cmd)"
+ git config "mergetool.$merge_tool.cmd"
fi
}
GIT_PREFIX=${GIT_PREFIX:-.}
export GIT_PREFIX
- merge_tool_path="$(get_merge_tool_path "$1")" || exit
+ merge_tool_path=$(get_merge_tool_path "$1") || exit
base_present="$2"
status=0
# Bring tool-specific functions into scope
setup_tool "$1"
+ exitcode=$?
+ case $exitcode in
+ 0)
+ :
+ ;;
+ 2)
+ # The configured tool is not a built-in tool.
+ test -n "$merge_tool_path" || return 1
+ ;;
+ *)
+ return $exitcode
+ ;;
+ esac
if merge_mode
then
# Run a either a configured or built-in diff tool
run_diff_cmd () {
- merge_tool_cmd="$(get_merge_tool_cmd "$1")"
+ merge_tool_cmd=$(get_merge_tool_cmd "$1")
if test -n "$merge_tool_cmd"
then
( eval $merge_tool_cmd )
# Run a either a configured or built-in merge tool
run_merge_cmd () {
- merge_tool_cmd="$(get_merge_tool_cmd "$1")"
+ merge_tool_cmd=$(get_merge_tool_cmd "$1")
if test -n "$merge_tool_cmd"
then
- trust_exit_code="$(git config --bool \
- mergetool."$1".trustExitCode || echo false)"
+ trust_exit_code=$(git config --bool \
+ "mergetool.$1.trustExitCode" || echo false)
if test "$trust_exit_code" = "false"
then
touch "$BACKUP"
esac
}
+show_tool_help () {
+ tool_opt="'git ${TOOL_MODE}tool --tool-<tool>'"
+
+ tab=' '
+ LF='
+'
+ any_shown=no
+
+ cmd_name=${TOOL_MODE}tool
+ config_tools=$({
+ diff_mode && list_config_tools difftool "$tab$tab"
+ list_config_tools mergetool "$tab$tab"
+ } | sort)
+ extra_content=
+ if test -n "$config_tools"
+ then
+ extra_content="${tab}user-defined:${LF}$config_tools"
+ fi
+
+ show_tool_names 'mode_ok && is_available' "$tab$tab" \
+ "$tool_opt may be set to one of the following:" \
+ "No suitable tool for 'git $cmd_name --tool=<tool>' found." \
+ "$extra_content" &&
+ any_shown=yes
+
+ show_tool_names 'mode_ok && ! is_available' "$tab$tab" \
+ "${LF}The following tools are valid, but not currently available:" &&
+ any_shown=yes
+
+ if test "$any_shown" = yes
+ then
+ echo
+ echo "Some of the tools listed above only work in a windowed"
+ echo "environment. If run in a terminal-only session, they will fail."
+ fi
+ exit 0
+}
+
guess_merge_tool () {
list_merge_tool_candidates
- echo >&2 "merge tool candidates: $tools"
+ cat >&2 <<-EOF
+
+ This message is displayed because '$TOOL_MODE.tool' is not configured.
+ See 'git ${TOOL_MODE}tool --tool-help' or 'git help config' for more details.
+ 'git ${TOOL_MODE}tool' will now attempt to use one of the following tools:
+ $tools
+ EOF
# Loop over each candidate and stop when a valid merge tool is found.
- for i in $tools
+ for tool in $tools
do
- merge_tool_path="$(translate_merge_tool_path "$i")"
- if type "$merge_tool_path" >/dev/null 2>&1
- then
- echo "$i"
- return 0
- fi
+ is_available "$tool" && echo "$tool" && return 0
done
- echo >&2 "No known merge resolution program available."
+ echo >&2 "No known ${TOOL_MODE} tool is available."
return 1
}
fi
if test -z "$merge_tool_path"
then
- merge_tool_path="$(translate_merge_tool_path "$merge_tool")"
+ merge_tool_path=$(translate_merge_tool_path "$merge_tool")
fi
if test -z "$(get_merge_tool_cmd "$merge_tool")" &&
! type "$merge_tool_path" >/dev/null 2>&1
get_merge_tool () {
# Check if a merge tool has been configured
- merge_tool="$(get_configured_merge_tool)"
+ merge_tool=$(get_configured_merge_tool)
# Try to guess an appropriate merge tool if no tool has been set.
if test -z "$merge_tool"
then
- merge_tool="$(guess_merge_tool)" || exit
+ merge_tool=$(guess_merge_tool) || exit
fi
echo "$merge_tool"
}