use warnings;
use File::Basename qw(dirname);
use File::Copy;
+use File::Compare;
use File::Find;
use File::stat;
-use File::Path qw(mkpath);
+use File::Path qw(mkpath rmtree);
use File::Temp qw(tempdir);
use Getopt::Long qw(:config pass_through);
use Git;
-my @tools;
-my @working_tree;
-my $rc;
-my $repo = Git->repository();
-my $repo_path = $repo->repo_path();
-
sub usage
{
my $exitcode = shift;
sub find_worktree
{
+ my ($repo) = @_;
+
# Git->repository->wc_path() does not honor changes to the working
# tree location made by $ENV{GIT_WORK_TREE} or the 'core.worktree'
# config variable.
return $worktree;
}
-my $workdir = find_worktree();
-
sub filter_tool_scripts
{
+ my ($tools) = @_;
if (-d $_) {
if ($_ ne ".") {
# Ignore files in subdirectories
}
} else {
if ((-f $_) && ($_ ne "defaults")) {
- push(@tools, $_);
+ push(@$tools, $_);
}
}
}
sub print_tool_help
{
- my ($cmd, @found, @notfound);
+ my ($cmd, @found, @notfound, @tools);
my $gitpath = Git::exec_path();
- find(\&filter_tool_scripts, "$gitpath/mergetools");
+ find(sub { filter_tool_scripts(\@tools) }, "$gitpath/mergetools");
foreach my $tool (@tools) {
$cmd = "TOOL_MODE=diff";
}
}
- print "'git difftool --tool=<tool>' may be set to one of the following:\n";
+ print << 'EOF';
+'git difftool --tool=<tool>' may be set to one of the following:
+EOF
print "\t$_\n" for (sort(@found));
- print "\nThe following tools are valid, but not currently available:\n";
+ print << 'EOF';
+
+The following tools are valid, but not currently available:
+EOF
print "\t$_\n" for (sort(@notfound));
- print "\nNOTE: Some of the tools listed above only work in a windowed\n";
- print "environment. If run in a terminal-only session, they will fail.\n";
+ print << 'EOF';
+NOTE: Some of the tools listed above only work in a windowed
+environment. If run in a terminal-only session, they will fail.
+EOF
exit(0);
}
+sub exit_cleanup
+{
+ my ($tmpdir, $status) = @_;
+ my $errno = $!;
+ rmtree($tmpdir);
+ if ($status and $errno) {
+ my ($package, $file, $line) = caller();
+ warn "$file line $line: $errno\n";
+ }
+ exit($status | ($status >> 8));
+}
+
sub setup_dir_diff
{
+ my ($repo, $workdir, $symlinks) = @_;
+
# Run the diff; exit immediately if no diff found
# 'Repository' and 'WorkingCopy' must be explicitly set to insure that
# if $GIT_DIR and $GIT_WORK_TREE are set in ENV, they are actually used
# by Git->repository->command*.
- my $diffrepo = Git->repository(Repository => $repo_path, WorkingCopy => $workdir);
- my $diffrtn = $diffrepo->command_oneline('diff', '--raw', '--no-abbrev', '-z', @ARGV);
- exit(0) if (length($diffrtn) == 0);
+ my $repo_path = $repo->repo_path();
+ my %repo_args = (Repository => $repo_path, WorkingCopy => $workdir);
+ my $diffrepo = Git->repository(%repo_args);
- # Setup temp directories
- my $tmpdir = tempdir('git-diffall.XXXXX', CLEANUP => 1, TMPDIR => 1);
- my $ldir = "$tmpdir/left";
- my $rdir = "$tmpdir/right";
- mkpath($ldir) or die $!;
- mkpath($rdir) or die $!;
+ my @gitargs = ('diff', '--raw', '--no-abbrev', '-z', @ARGV);
+ my $diffrtn = $diffrepo->command_oneline(@gitargs);
+ exit(0) unless defined($diffrtn);
# Build index info for left and right sides of the diff
my $submodule_mode = '160000';
my $rindex = '';
my %submodule;
my %symlink;
+ my @working_tree = ();
my @rawdiff = split('\0', $diffrtn);
my $i = 0;
while ($i < $#rawdiff) {
if ($rawdiff[$i] =~ /^::/) {
- print "Combined diff formats ('-c' and '--cc') are not supported in directory diff mode.\n";
+ warn << 'EOF';
+Combined diff formats ('-c' and '--cc') are not supported in
+directory diff mode ('-d' and '--dir-diff').
+EOF
exit(1);
}
- my ($lmode, $rmode, $lsha1, $rsha1, $status) = split(' ', substr($rawdiff[$i], 1));
+ my ($lmode, $rmode, $lsha1, $rsha1, $status) =
+ split(' ', substr($rawdiff[$i], 1));
my $src_path = $rawdiff[$i + 1];
my $dst_path;
$i += 2;
}
- if (($lmode eq $submodule_mode) or ($rmode eq $submodule_mode)) {
+ if ($lmode eq $submodule_mode or $rmode eq $submodule_mode) {
$submodule{$src_path}{left} = $lsha1;
if ($lsha1 ne $rsha1) {
$submodule{$dst_path}{right} = $rsha1;
}
if ($lmode eq $symlink_mode) {
- $symlink{$src_path}{left} = $diffrepo->command_oneline('show', "$lsha1");
+ $symlink{$src_path}{left} =
+ $diffrepo->command_oneline('show', "$lsha1");
}
if ($rmode eq $symlink_mode) {
- $symlink{$dst_path}{right} = $diffrepo->command_oneline('show', "$rsha1");
+ $symlink{$dst_path}{right} =
+ $diffrepo->command_oneline('show', "$rsha1");
}
- if (($lmode ne $null_mode) and ($status !~ /^C/)) {
+ if ($lmode ne $null_mode and $status !~ /^C/) {
$lindex .= "$lmode $lsha1\t$src_path\0";
}
}
}
+ # Setup temp directories
+ my $tmpdir = tempdir('git-difftool.XXXXX', CLEANUP => 0, TMPDIR => 1);
+ my $ldir = "$tmpdir/left";
+ my $rdir = "$tmpdir/right";
+ mkpath($ldir) or exit_cleanup($tmpdir, 1);
+ mkpath($rdir) or exit_cleanup($tmpdir, 1);
+
# If $GIT_DIR is not set prior to calling 'git update-index' and
# 'git checkout-index', then those commands will fail if difftool
# is called from a directory other than the repo root.
# Populate the left and right directories based on each index file
my ($inpipe, $ctx);
$ENV{GIT_INDEX_FILE} = "$tmpdir/lindex";
- ($inpipe, $ctx) = $repo->command_input_pipe(qw/update-index -z --index-info/);
+ ($inpipe, $ctx) =
+ $repo->command_input_pipe(qw(update-index -z --index-info));
print($inpipe $lindex);
$repo->command_close_pipe($inpipe, $ctx);
- $rc = system('git', 'checkout-index', '--all', "--prefix=$ldir/");
- exit($rc | ($rc >> 8)) if ($rc != 0);
+
+ my $rc = system('git', 'checkout-index', '--all', "--prefix=$ldir/");
+ exit_cleanup($tmpdir, $rc) if $rc != 0;
$ENV{GIT_INDEX_FILE} = "$tmpdir/rindex";
- ($inpipe, $ctx) = $repo->command_input_pipe(qw/update-index -z --index-info/);
+ ($inpipe, $ctx) =
+ $repo->command_input_pipe(qw(update-index -z --index-info));
print($inpipe $rindex);
$repo->command_close_pipe($inpipe, $ctx);
+
$rc = system('git', 'checkout-index', '--all', "--prefix=$rdir/");
- exit($rc | ($rc >> 8)) if ($rc != 0);
+ exit_cleanup($tmpdir, $rc) if $rc != 0;
# If $GIT_DIR was explicitly set just for the update/checkout
# commands, then it should be unset before continuing.
for my $file (@working_tree) {
my $dir = dirname($file);
unless (-d "$rdir/$dir") {
- mkpath("$rdir/$dir") or die $!;
+ mkpath("$rdir/$dir") or
+ exit_cleanup($tmpdir, 1);
+ }
+ if ($symlinks) {
+ symlink("$workdir/$file", "$rdir/$file") or
+ exit_cleanup($tmpdir, 1);
+ } else {
+ copy("$workdir/$file", "$rdir/$file") or
+ exit_cleanup($tmpdir, 1);
+
+ my $mode = stat("$workdir/$file")->mode;
+ chmod($mode, "$rdir/$file") or
+ exit_cleanup($tmpdir, 1);
}
- copy("$workdir/$file", "$rdir/$file") or die $!;
- chmod(stat("$workdir/$file")->mode, "$rdir/$file") or die $!;
}
# Changes to submodules require special treatment. This loop writes a
# temporary file to both the left and right directories to show the
# change in the recorded SHA1 for the submodule.
for my $path (keys %submodule) {
+ my $ok;
if (defined($submodule{$path}{left})) {
- write_to_file("$ldir/$path", "Subproject commit $submodule{$path}{left}");
+ $ok = write_to_file("$ldir/$path",
+ "Subproject commit $submodule{$path}{left}");
}
if (defined($submodule{$path}{right})) {
- write_to_file("$rdir/$path", "Subproject commit $submodule{$path}{right}");
+ $ok = write_to_file("$rdir/$path",
+ "Subproject commit $submodule{$path}{right}");
}
+ exit_cleanup($tmpdir, 1) if not $ok;
}
# Symbolic links require special treatment. The standard "git diff"
# shows only the link itself, not the contents of the link target.
# This loop replicates that behavior.
for my $path (keys %symlink) {
+ my $ok;
if (defined($symlink{$path}{left})) {
- write_to_file("$ldir/$path", $symlink{$path}{left});
+ $ok = write_to_file("$ldir/$path",
+ $symlink{$path}{left});
}
if (defined($symlink{$path}{right})) {
- write_to_file("$rdir/$path", $symlink{$path}{right});
+ $ok = write_to_file("$rdir/$path",
+ $symlink{$path}{right});
}
+ exit_cleanup($tmpdir, 1) if not $ok;
}
- return ($ldir, $rdir);
+ return ($ldir, $rdir, $tmpdir, @working_tree);
}
sub write_to_file
# Make sure the path to the file exists
my $dir = dirname($path);
unless (-d "$dir") {
- mkpath("$dir") or die $!;
+ mkpath("$dir") or return 0;
}
# If the file already exists in that location, delete it. This
# is required in the case of symbolic links.
- unlink("$path");
+ unlink($path);
- open(my $fh, '>', "$path") or die $!;
+ open(my $fh, '>', $path) or return 0;
print($fh $value);
close($fh);
-}
-# parse command-line options. all unrecognized options and arguments
-# are passed through to the 'git diff' command.
-my ($difftool_cmd, $dirdiff, $extcmd, $gui, $help, $prompt, $tool_help);
-GetOptions('g|gui!' => \$gui,
- 'd|dir-diff' => \$dirdiff,
- 'h' => \$help,
- 'prompt!' => \$prompt,
- 'y' => sub { $prompt = 0; },
- 't|tool:s' => \$difftool_cmd,
- 'tool-help' => \$tool_help,
- 'x|extcmd:s' => \$extcmd);
-
-if (defined($help)) {
- usage(0);
-}
-if (defined($tool_help)) {
- print_tool_help();
+ return 1;
}
-if (defined($difftool_cmd)) {
- if (length($difftool_cmd) > 0) {
- $ENV{GIT_DIFF_TOOL} = $difftool_cmd;
- } else {
- print "No <tool> given for --tool=<tool>\n";
- usage(1);
+
+sub main
+{
+ # parse command-line options. all unrecognized options and arguments
+ # are passed through to the 'git diff' command.
+ my %opts = (
+ difftool_cmd => undef,
+ dirdiff => undef,
+ extcmd => undef,
+ gui => undef,
+ help => undef,
+ prompt => undef,
+ symlinks => $^O ne 'cygwin' &&
+ $^O ne 'MSWin32' && $^O ne 'msys',
+ tool_help => undef,
+ );
+ GetOptions('g|gui!' => \$opts{gui},
+ 'd|dir-diff' => \$opts{dirdiff},
+ 'h' => \$opts{help},
+ 'prompt!' => \$opts{prompt},
+ 'y' => sub { $opts{prompt} = 0; },
+ 'symlinks' => \$opts{symlinks},
+ 'no-symlinks' => sub { $opts{symlinks} = 0; },
+ 't|tool:s' => \$opts{difftool_cmd},
+ 'tool-help' => \$opts{tool_help},
+ 'x|extcmd:s' => \$opts{extcmd});
+
+ if (defined($opts{help})) {
+ usage(0);
}
-}
-if (defined($extcmd)) {
- if (length($extcmd) > 0) {
- $ENV{GIT_DIFFTOOL_EXTCMD} = $extcmd;
- } else {
- print "No <cmd> given for --extcmd=<cmd>\n";
- usage(1);
+ if (defined($opts{tool_help})) {
+ print_tool_help();
}
-}
-if ($gui) {
- my $guitool = '';
- $guitool = Git::config('diff.guitool');
- if (length($guitool) > 0) {
- $ENV{GIT_DIFF_TOOL} = $guitool;
+ if (defined($opts{difftool_cmd})) {
+ if (length($opts{difftool_cmd}) > 0) {
+ $ENV{GIT_DIFF_TOOL} = $opts{difftool_cmd};
+ } else {
+ print "No <tool> given for --tool=<tool>\n";
+ usage(1);
+ }
+ }
+ if (defined($opts{extcmd})) {
+ if (length($opts{extcmd}) > 0) {
+ $ENV{GIT_DIFFTOOL_EXTCMD} = $opts{extcmd};
+ } else {
+ print "No <cmd> given for --extcmd=<cmd>\n";
+ usage(1);
+ }
+ }
+ if ($opts{gui}) {
+ my $guitool = Git::config('diff.guitool');
+ if (length($guitool) > 0) {
+ $ENV{GIT_DIFF_TOOL} = $guitool;
+ }
+ }
+
+ # In directory diff mode, 'git-difftool--helper' is called once
+ # to compare the a/b directories. In file diff mode, 'git diff'
+ # will invoke a separate instance of 'git-difftool--helper' for
+ # each file that changed.
+ if (defined($opts{dirdiff})) {
+ dir_diff($opts{extcmd}, $opts{symlinks});
+ } else {
+ file_diff($opts{prompt});
}
}
-# In directory diff mode, 'git-difftool--helper' is called once
-# to compare the a/b directories. In file diff mode, 'git diff'
-# will invoke a separate instance of 'git-difftool--helper' for
-# each file that changed.
-if (defined($dirdiff)) {
- my ($a, $b) = setup_dir_diff();
+sub dir_diff
+{
+ my ($extcmd, $symlinks) = @_;
+ my $rc;
+ my $error = 0;
+ my $repo = Git->repository();
+ my $workdir = find_worktree($repo);
+ my ($a, $b, $tmpdir, @worktree) =
+ setup_dir_diff($repo, $workdir, $symlinks);
+
if (defined($extcmd)) {
$rc = system($extcmd, $a, $b);
} else {
$ENV{GIT_DIFFTOOL_DIRDIFF} = 'true';
$rc = system('git', 'difftool--helper', $a, $b);
}
-
- exit($rc | ($rc >> 8)) if ($rc != 0);
-
# If the diff including working copy files and those
# files were modified during the diff, then the changes
- # should be copied back to the working tree
- for my $file (@working_tree) {
- copy("$b/$file", "$workdir/$file") or die $!;
- chmod(stat("$b/$file")->mode, "$workdir/$file") or die $!;
+ # should be copied back to the working tree.
+ # Do not copy back files when symlinks are used and the
+ # external tool did not replace the original link with a file.
+ for my $file (@worktree) {
+ next if $symlinks && -l "$b/$file";
+ next if ! -f "$b/$file";
+
+ my $diff = compare("$b/$file", "$workdir/$file");
+ if ($diff == 0) {
+ next;
+ } elsif ($diff == -1) {
+ my $errmsg = "warning: Could not compare ";
+ $errmsg += "'$b/$file' with '$workdir/$file'\n";
+ warn $errmsg;
+ $error = 1;
+ } elsif ($diff == 1) {
+ my $mode = stat("$b/$file")->mode;
+ copy("$b/$file", "$workdir/$file") or
+ exit_cleanup($tmpdir, 1);
+
+ chmod($mode, "$workdir/$file") or
+ exit_cleanup($tmpdir, 1);
+ }
}
-} else {
+ if ($error) {
+ warn "warning: Temporary files exist in '$tmpdir'.\n";
+ warn "warning: You may want to cleanup or recover these.\n";
+ exit(1);
+ } else {
+ exit_cleanup($tmpdir, $rc);
+ }
+}
+
+sub file_diff
+{
+ my ($prompt) = @_;
+
if (defined($prompt)) {
if ($prompt) {
$ENV{GIT_DIFFTOOL_PROMPT} = 'true';
my $rc = system('git', 'diff', @ARGV);
exit($rc | ($rc >> 8));
}
+
+main();