and the porcelains. The variables are divided into sections, wherein
the fully qualified variable name of the variable itself is the last
dot-separated segment and the section name is everything before the last
-dot. The variable names are case-insensitive and only alphanumeric
-characters are allowed. Some variables may appear multiple times.
+dot. The variable names are case-insensitive, allow only alphanumeric
+characters and `-`, and must start with an alphabetic character. Some
+variables may appear multiple times.
Syntax
~~~~~~
header) are recognized as setting variables, in the form
'name = value'. If there is no equal sign on the line, the entire line
is taken as 'name' and the variable is recognized as boolean "true".
-The variable names are case-insensitive and only alphanumeric
-characters and `-` are allowed. There can be more than one value
-for a given variable; we say then that variable is multivalued.
+The variable names are case-insensitive, allow only alphanumeric characters
+and `-`, and must start with an alphabetic character. There can be more
+than one value for a given variable; we say then that the variable is
+multivalued.
Leading and trailing whitespace in a variable value is discarded.
Internal whitespace within a variable value is retained verbatim.
The values following the equals sign in variable assign are all either
a string, an integer, or a boolean. Boolean values may be given as yes/no,
-0/1, true/false or on/off. Case is not significant in boolean values, when
+1/0, true/false or on/off. Case is not significant in boolean values, when
converting value to the canonical form using '--bool' type specifier;
'git config' will ensure that the output is "true" or "false".
Some variables may require a special value format.
+Includes
+~~~~~~~~
+
+You can include one config file from another by setting the special
+`include.path` variable to the name of the file to be included. The
+included file is expanded immediately, as if its contents had been
+found at the location of the include directive. If the value of the
+`include.path` variable is a relative path, the path is considered to be
+relative to the configuration file in which the include directive was
+found. The value of `include.path` is subject to tilde expansion: `~/`
+is expanded to the value of `$HOME`, and `~user/` to the specified
+user's home directory. See below for examples.
+
Example
~~~~~~~
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
+ [include]
+ path = /path/to/foo.inc ; include by absolute path
+ path = foo ; expand "foo" relative to the current file
+ path = ~/foo ; expand "foo" in your $HOME directory
+
Variables
~~~~~~~~~
porcelain configuration variables in the respective porcelain documentation.
advice.*::
- When set to 'true', display the given optional help message.
- When set to 'false', do not display. The configuration variables
- are:
+ These variables control various optional help messages designed to
+ aid new users. All 'advice.*' variables default to 'true', and you
+ can tell Git that you do not need help by setting these to 'false':
+
--
pushNonFastForward::
- Advice shown when linkgit:git-push[1] refuses
- non-fast-forward refs. Default: true.
+ Set this variable to 'false' if you want to disable
+ 'pushNonFFCurrent', 'pushNonFFDefault', and
+ 'pushNonFFMatching' simultaneously.
+ pushNonFFCurrent::
+ Advice shown when linkgit:git-push[1] fails due to a
+ non-fast-forward update to the current branch.
+ pushNonFFDefault::
+ Advice to set 'push.default' to 'upstream' or 'current'
+ when you ran linkgit:git-push[1] and pushed 'matching
+ refs' by default (i.e. you did not provide an explicit
+ refspec, and no 'push.default' configuration was set)
+ and it resulted in a non-fast-forward error.
+ pushNonFFMatching::
+ Advice shown when you ran linkgit:git-push[1] and pushed
+ 'matching refs' explicitly (i.e. you used ':', or
+ specified a refspec that isn't your current branch) and
+ it resulted in a non-fast-forward error.
statusHints::
Directions on how to stage/unstage/add shown in the
output of linkgit:git-status[1] and the template shown
- when writing commit messages. Default: true.
+ when writing commit messages.
commitBeforeMerge::
Advice shown when linkgit:git-merge[1] refuses to
merge to avoid overwriting local changes.
- Default: true.
resolveConflict::
Advices shown by various commands when conflicts
prevent the operation from being performed.
- Default: true.
implicitIdentity::
Advice on how to set your identity configuration when
your information is guessed from the system username and
- domain name. Default: true.
-
+ domain name.
detachedHead::
- Advice shown when you used linkgit::git-checkout[1] to
+ Advice shown when you used linkgit:git-checkout[1] to
move to the detach HEAD state, to instruct how to create
- a local branch after the fact. Default: true.
+ a local branch after the fact.
--
core.fileMode::
If false, the executable bit differences between the index and
- the working copy are ignored; useful on broken filesystems like FAT.
+ the working tree are ignored; useful on broken filesystems like FAT.
See linkgit:git-update-index[1].
+
The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
core.trustctime::
If false, the ctime differences between the index and the
- working copy are ignored; useful when the inode change time
+ working tree are ignored; useful when the inode change time
is regularly modified by something outside Git (file system
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
If true, commands which modify both the working tree and the index
will mark the updated paths with the "assume unchanged" bit in the
index. These marked files are then assumed to stay unchanged in the
- working copy, until you mark them otherwise manually - Git will not
+ working tree, until you mark them otherwise manually - Git will not
detect the file changes by lstat() calls. This is useful on systems
where those are very slow, such as Microsoft Windows.
See linkgit:git-update-index[1].
= true).
core.worktree::
- Set the path to the root of the work tree.
+ Set the path to the root of the working tree.
This can be overridden by the GIT_WORK_TREE environment
- variable and the '--work-tree' command line option. It can be
- an absolute path or a relative path to the .git directory,
- either specified by --git-dir or GIT_DIR, or automatically
- discovered.
- If --git-dir or GIT_DIR are specified but none of
+ variable and the '--work-tree' command line option.
+ The value can be an absolute path or relative to the path to
+ the .git directory, which is either specified by --git-dir
+ or GIT_DIR, or automatically discovered.
+ If --git-dir or GIT_DIR is specified but none of
--work-tree, GIT_WORK_TREE and core.worktree is specified,
- the current working directory is regarded as the root of the
- work tree.
+ the current working directory is regarded as the top level
+ of your working tree.
+
Note that this variable is honored even when set in a configuration
-file in a ".git" subdirectory of a directory, and its value differs
+file in a ".git" subdirectory of a directory and its value differs
from the latter directory (e.g. "/path/to/.git/config" has
core.worktree set to "/different/path"), which is most likely a
-misconfiguration. Running git commands in "/path/to" directory will
+misconfiguration. Running git commands in the "/path/to" directory will
still use "/different/path" as the root of the work tree and can cause
-great confusion to the users.
+confusion unless you know what you are doing (e.g. you are creating a
+read-only snapshot of the same index to a location different from the
+repository's usual working tree).
core.logAllRefUpdates::
Enable the reflog. Updates to a ref <ref> is logged to the file
SHA1, the date/time and the reason of the update, but
only when the file exists. If this configuration
variable is set to true, missing "$GIT_DIR/logs/<ref>"
- file is automatically created for branch heads.
+ file is automatically created for branch heads (i.e. under
+ refs/heads/), remote refs (i.e. under refs/remotes/),
+ note refs (i.e. under refs/notes/), and the symbolic ref HEAD.
+
This information can be used to determine what commit
was the tip of a branch "2 days ago".
be delta compressed, but larger binary media files won't be.
+
Common unit suffixes of 'k', 'm', or 'g' are supported.
-+
-Currently only linkgit:git-fast-import[1] honors this setting.
core.excludesfile::
In addition to '.gitignore' (per-directory) and
'.git/info/exclude', git looks into this file for patterns
- of files which are not meant to be tracked. "{tilde}/" is expanded
- to the value of `$HOME` and "{tilde}user/" to the specified user's
+ of files which are not meant to be tracked. "`~/`" is expanded
+ to the value of `$HOME` and "`~user/`" to the specified user's
home directory. See linkgit:gitignore[5].
core.askpass::
prompt. The external program shall be given a suitable prompt as
command line argument and write the password on its STDOUT.
+core.attributesfile::
+ In addition to '.gitattributes' (per-directory) and
+ '.git/info/attributes', git looks into this file for attributes
+ (see linkgit:gitattributes[5]). Path expansions are made the same
+ way as for `core.excludesfile`.
+
core.editor::
Commands such as `commit` and `tag` that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
+sequence.editor::
+ Text editor used by `git rebase -i` for editing the rebase insn file.
+ The value is meant to be interpreted by the shell when it is used.
+ It can be overridden by the `GIT_SEQUENCE_EDITOR` environment variable.
+ When not configured the default commit message editor is used instead.
+
core.pager::
The command that git will use to paginate output. Can
be overridden with the `GIT_PAGER` environment
part of the line terminator, i.e. with it, `trailing-space`
does not trigger if the character before such a carriage-return
is not a whitespace (not enabled by default).
+* `tabwidth=<n>` tells how many character positions a tab occupies; this
+ is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent`
+ errors. The default tab width is 8. Allowed values are 1 to 63.
core.fsyncobjectfiles::
This boolean will enable 'fsync()' when writing object files.
Enable "sparse checkout" feature. See section "Sparse checkout" in
linkgit:git-read-tree[1] for more information.
+core.abbrev::
+ Set the length object names are abbreviated to. If unspecified,
+ many commands abbreviate to 7 hexdigits, which may not be enough
+ for abbreviated object names to stay unique for sufficiently long
+ time.
+
add.ignore-errors::
+add.ignoreErrors::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
- option of linkgit:git-add[1].
+ option of linkgit:git-add[1]. Older versions of git accept only
+ `add.ignore-errors`, which does not follow the usual naming
+ convention for configuration variables. Newer versions of git
+ honor `add.ignoreErrors` as well.
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
"gitk --all --not ORIG_HEAD". Note that shell commands will be
executed from the top-level directory of a repository, which may
not necessarily be the current directory.
+'GIT_PREFIX' is set as returned by running 'git rev-parse --show-prefix'
+from the original current directory. See linkgit:git-rev-parse[1].
am.keepcr::
If true, git-am will call git-mailsplit for patches in mbox format
this behavior can be chosen per-branch using the `--track`
and `--no-track` options. The valid settings are: `false` -- no
automatic setup is done; `true` -- automatic setup is done when the
- starting point is a remote branch; `always` -- automatic setup is
- done when the starting point is either a local branch or remote
+ starting point is a remote-tracking branch; `always` --
+ automatic setup is done when the starting point is either a
+ local branch or remote-tracking
branch. This option defaults to true.
branch.autosetuprebase::
When `local`, rebase is set to true for tracked branches of
other local branches.
When `remote`, rebase is set to true for tracked branches of
- remote branches.
+ remote-tracking branches.
When `always`, rebase will be set to true for all tracking
branches.
See "branch.autosetupmerge" for details on how to set up a
branch.<name>.merge::
Defines, together with branch.<name>.remote, the upstream branch
- for the given branch. It tells 'git fetch'/'git pull' which
+ for the given branch. It tells 'git fetch'/'git pull'/'git rebase' which
branch to merge and can also affect 'git push' (see push.default).
When in branch <name>, it tells 'git fetch' the default
refspec to be marked for merging in FETCH_HEAD. The value is
branch.<name>.rebase::
When true, rebase the branch <name> on top of the fetched branch,
instead of merging the default branch from the default remote when
- "git pull" is run.
- *NOTE*: this is a possibly dangerous operation; do *not* use
- it unless you understand the implications (see linkgit:git-rebase[1]
- for details).
+ "git pull" is run. See "pull.rebase" for doing this in a non
+ branch-specific manner.
++
+*NOTE*: this is a possibly dangerous operation; do *not* use
+it unless you understand the implications (see linkgit:git-rebase[1]
+for details).
browser.<tool>.cmd::
Specify the command to invoke the specified browser. The
specified command is evaluated in shell with the URLs passed
- as arguments. (See linkgit:git-web--browse[1].)
+ as arguments. (See linkgit:git-web{litdd}browse[1].)
browser.<tool>.path::
Override the path for the given tool that may be used to
color.branch.<slot>::
Use customized color for branch coloration. `<slot>` is one of
`current` (the current branch), `local` (a local branch),
- `remote` (a tracking branch in refs/remotes/), `plain` (other
+ `remote` (a remote-tracking branch in refs/remotes/), `plain` (other
refs).
+
The value for these configuration variables is a list of colors (at most
doesn't matter.
color.diff::
- When set to `always`, always use colors in patch.
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ Whether to use ANSI escape sequences to add color to patches.
+ If this is set to `always`, linkgit:git-diff[1],
+ linkgit:git-log[1], and linkgit:git-show[1] will use color
+ for all patches. If it is set to `true` or `auto`, those
+ commands will only use color when output is to the terminal.
+ Defaults to false.
++
+This does not affect linkgit:git-format-patch[1] nor the
+'git-diff-{asterisk}' plumbing commands. Can be overridden on the
+command line with the `--color[=<when>]` option.
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
of `branch`, `remoteBranch`, `tag`, `stash` or `HEAD` for local
- branches, remote tracking branches, tags, stash and HEAD, respectively.
+ branches, remote-tracking branches, tags, stash and HEAD, respectively.
color.grep::
When set to `always`, always highlight matches. When `false` (or
one of `header` (the header text of the status message),
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
- `untracked` (files which are not tracked by git), or
+ `untracked` (files which are not tracked by git),
+ `branch` (the current branch), or
`nobranch` (the color the 'no branch' warning is shown in, defaulting
to red). The values of these variables may be specified as in
color.branch.<slot>.
color.ui::
- When set to `always`, always use colors in all git commands which
- are capable of colored output. When false (or `never`), never. When
- set to `true` or `auto`, use colors only when the output is to the
- terminal. When more specific variables of color.* are set, they always
- take precedence over this setting. Defaults to false.
+ This variable determines the default value for variables such
+ as `color.diff` and `color.grep` that control the use of color
+ per command family. Its scope will expand as more commands learn
+ configuration to set a default for the `--color` option. Set it
+ to `always` if you want all output not intended for machine
+ consumption to use color, to `true` or `auto` if you want such
+ output to use color when written to the terminal, or to `false` or
+ `never` if you prefer git commands not to use color unless enabled
+ explicitly with some other configuration or the `--color` option.
+
+column.ui::
+ Specify whether supported commands should output in columns.
+ This variable consists of a list of tokens separated by spaces
+ or commas:
++
+--
+`always`;;
+ always show in columns
+`never`;;
+ never show in columns
+`auto`;;
+ show in columns if the output is to the terminal
+`column`;;
+ fill columns before rows (default)
+`row`;;
+ fill rows before columns
+`plain`;;
+ show in one column
+`dense`;;
+ make unequal size columns to utilize more space
+`nodense`;;
+ make equal size columns
+--
++
+ This option defaults to 'never'.
+
+column.branch::
+ Specify whether to output branch listing in `git branch` in columns.
+ See `column.ui` for details.
+
+column.status::
+ Specify whether to output untracked files in `git status` in columns.
+ See `column.ui` for details.
+
+column.tag::
+ Specify whether to output tag listing in `git tag` in columns.
+ See `column.ui` for details.
commit.status::
A boolean to enable/disable inclusion of status information in the
commit.template::
Specify a file to use as the template for new commit messages.
- "{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
+ "`~/`" is expanded to the value of `$HOME` and "`~user/`" to the
specified user's home directory.
-diff.autorefreshindex::
- When using 'git diff' to compare with work tree
- files, do not consider stat-only change as changed.
- Instead, silently run `git update-index --refresh` to
- update the cached stat information for paths whose
- contents in the work tree match the contents in the
- index. This option defaults to true. Note that this
- affects only 'git diff' Porcelain, and not lower level
- 'diff' commands such as 'git diff-files'.
-
-diff.external::
- If this config variable is set, diff generation is not
- performed using the internal diff machinery, but using the
- given command. Can be overridden with the `GIT_EXTERNAL_DIFF'
- environment variable. The command is called with parameters
- as described under "git Diffs" in linkgit:git[1]. Note: if
- you want to use an external diff program only on a subset of
- your files, you might want to use linkgit:gitattributes[5] instead.
-
-diff.mnemonicprefix::
- If set, 'git diff' uses a prefix pair that is different from the
- standard "a/" and "b/" depending on what is being compared. When
- this configuration is in effect, reverse diff output also swaps
- the order of the prefixes:
-`git diff`;;
- compares the (i)ndex and the (w)ork tree;
-`git diff HEAD`;;
- compares a (c)ommit and the (w)ork tree;
-`git diff --cached`;;
- compares a (c)ommit and the (i)ndex;
-`git diff HEAD:file1 file2`;;
- compares an (o)bject and a (w)ork tree entity;
-`git diff --no-index a b`;;
- compares two non-git things (1) and (2).
-
-diff.noprefix::
- If set, 'git diff' does not show any source or destination prefix.
-
-diff.renameLimit::
- The number of files to consider when performing the copy/rename
- detection; equivalent to the 'git diff' option '-l'.
-
-diff.renames::
- Tells git to detect renames. If set to any boolean value, it
- will enable basic rename detection. If set to "copies" or
- "copy", it will detect copies, as well.
-
-diff.ignoreSubmodules::
- Sets the default value of --ignore-submodules. Note that this
- affects only 'git diff' Porcelain, and not lower level 'diff'
- commands such as 'git diff-files'. 'git checkout' also honors
- this setting when reporting uncommitted changes.
-
-diff.suppressBlankEmpty::
- A boolean to inhibit the standard behavior of printing a space
- before each empty output line. Defaults to false.
-
-diff.tool::
- Controls which diff tool is used. `diff.tool` overrides
- `merge.tool` when used by linkgit:git-difftool[1] and has
- the same valid values as `merge.tool` minus "tortoisemerge"
- and plus "kompare".
+credential.helper::
+ Specify an external helper to be called when a username or
+ password credential is needed; the helper may consult external
+ storage to avoid prompting the user for the credentials. See
+ linkgit:gitcredentials[7] for details.
+
+credential.useHttpPath::
+ When acquiring credentials, consider the "path" component of an http
+ or https URL to be important. Defaults to false. See
+ linkgit:gitcredentials[7] for more information.
+
+credential.username::
+ If no username is set for a network authentication, use this username
+ by default. See credential.<context>.* below, and
+ linkgit:gitcredentials[7].
+
+credential.<url>.*::
+ Any of the credential.* options above can be applied selectively to
+ some credentials. For example "credential.https://example.com.username"
+ would set the default username only for https connections to
+ example.com. See linkgit:gitcredentials[7] for details on how URLs are
+ matched.
+
+include::diff-config.txt[]
difftool.<tool>.path::
Override the path for the given tool. This is useful in case
sequences that match the regular expression are "words", all other
characters are *ignorable* whitespace.
+fetch.recurseSubmodules::
+ This option can be either set to a boolean value or to 'on-demand'.
+ Setting it to a boolean changes the behavior of fetch and pull to
+ unconditionally recurse into submodules when set to true or to not
+ recurse at all when set to false. When set to 'on-demand' (the default
+ value), fetch and pull will only recurse into a populated submodule
+ when its superproject retrieves a commit that updates the submodule's
+ reference.
+
+fetch.fsckObjects::
+ If it is set to true, git-fetch-pack will check all fetched
+ objects. It will abort in the case of a malformed object or a
+ broken link. The result of an abort are only dangling objects.
+ Defaults to false. If not set, the value of `transfer.fsckObjects`
+ is used instead.
+
fetch.unpackLimit::
If the number of objects fetched over the git native
transfer is below this
a boolean value, or `shallow` or `deep`. `shallow` threading
makes every mail a reply to the head of the series,
where the head is chosen from the cover letter, the
- `\--in-reply-to`, and the first patch mail, in this order.
+ `--in-reply-to`, and the first patch mail, in this order.
`deep` threading makes every mail a reply to the previous one.
A true boolean value is the same as `shallow`, and a false
value disables threading.
the rights to submit this work under the same open source license.
Please see the 'SubmittingPatches' document for further discussion.
+filter.<driver>.clean::
+ The command which is used to convert the content of a worktree
+ file to a blob upon checkin. See linkgit:gitattributes[5] for
+ details.
+
+filter.<driver>.smudge::
+ The command which is used to convert the content of a blob
+ object to a worktree file upon checkout. See
+ linkgit:gitattributes[5] for details.
+
gc.aggressiveWindow::
The window size parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
Running `git pack-refs` in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
transports such as HTTP. This variable determines whether
- 'git gc' runs `git pack-refs`. This can be set to `nobare`
+ 'git gc' runs `git pack-refs`. This can be set to `notbare`
to enable it within all non-bare repos or it can be set to a
boolean value. The default is `true`.
is one of "ext" and "pserver") to make them apply only for the given
access method.
+gitweb.category::
+gitweb.description::
+gitweb.owner::
+gitweb.url::
+ See linkgit:gitweb[1] for description.
+
+gitweb.avatar::
+gitweb.blame::
+gitweb.grep::
+gitweb.highlight::
+gitweb.patches::
+gitweb.pickaxe::
+gitweb.remote_heads::
+gitweb.showsizes::
+gitweb.snapshot::
+ See linkgit:gitweb.conf[5] for description.
+
+grep.lineNumber::
+ If set to true, enable '-n' option by default.
+
+grep.extendedRegexp::
+ If set to true, enable '--extended-regexp' option by default.
+
+gpg.program::
+ Use this custom program instead of "gpg" found on $PATH when
+ making or verifying a PGP signature. The program must support the
+ same command line interface as GPG, namely, to verify a detached
+ signature, "gpg --verify $file - <$signature" is run, and the
+ program is expected to signal a good signature by exiting with
+ code 0, and to generate an ascii-armored detached signature, the
+ standard input of "gpg -bsau $key" is fed with the contents to be
+ signed, and the program is expected to send the result to its
+ standard output.
+
gui.commitmsgwidth::
Defines how wide the commit message window is in the
linkgit:git-gui[1]. "75" is the default.
linkgit:git-gui[1].
gui.pruneduringfetch::
- "true" if linkgit:git-gui[1] should prune tracking branches when
+ "true" if linkgit:git-gui[1] should prune remote-tracking branches when
performing a fetch. The default value is "false".
gui.trustmtime::
This is the default.
http.proxy::
- Override the HTTP proxy, normally configured using the 'http_proxy'
- environment variable (see linkgit:curl[1]). This can be overridden
- on a per-remote basis; see remote.<name>.proxy
+ Override the HTTP proxy, normally configured using the 'http_proxy',
+ 'https_proxy', and 'all_proxy' environment variables (see
+ `curl(1)`). This can be overridden on a per-remote basis; see
+ remote.<name>.proxy
+
+http.cookiefile::
+ File containing previously stored cookie lines which should be used
+ in the git http session, if they match the server. The file format
+ of the file to read cookies from should be plain HTTP headers or
+ the Netscape/Mozilla cookie file format (see linkgit:curl[1]).
+ NOTE that the file specified with http.cookiefile is only used as
+ input. No cookies will be stored in the file.
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
interactive.singlekey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
- Currently this is used only by the `\--patch` mode of
- linkgit:git-add[1]. Note that this setting is silently
- ignored if portable keystroke input is not available.
+ Currently this is used by the `--patch` mode of
+ linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
+ linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
+ setting is silently ignored if portable keystroke input
+ is not available.
+
+log.abbrevCommit::
+ If true, makes linkgit:git-log[1], linkgit:git-show[1], and
+ linkgit:git-whatchanged[1] assume `--abbrev-commit`. You may
+ override this option with `--no-abbrev-commit`.
log.date::
Set the default date-time mode for the 'log' command.
Setting a value for log.date is similar to using 'git log''s
- `\--date` option. Possible values are `relative`, `local`,
+ `--date` option. Possible values are `relative`, `local`,
`default`, `iso`, `rfc`, and `short`; see linkgit:git-log[1]
for details.
You may also specify this configuration several times.
+
Does not have a default value; you must configure this variable to
-enable note rewriting.
+enable note rewriting. Set it to `refs/notes/commits` to enable
+rewriting for the default commit notes.
+
This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
environment variable, which must be a colon separated list of refs or
not set, defaults to -1, the zlib default, which is "a default
compromise between speed and compression (currently equivalent
to level 6)."
++
+Note that changing the compression level will not automatically recompress
+all existing objects. You can force recompression by passing the -F option
+to linkgit:git-repack[1].
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
and this config option ignored whenever the corresponding pack is
larger than 2 GB.
+
-If you have an old git that does not understand the version 2 `{asterisk}.idx` file,
+If you have an old git that does not understand the version 2 `*.idx` file,
cloning or fetching over a non native protocol (e.g. "http" and "rsync")
-that will copy both `{asterisk}.pack` file and corresponding `{asterisk}.idx` file from the
+that will copy both `*.pack` file and corresponding `*.idx` file from the
other side may give you a repository that cannot be accessed with your
-older version of git. If the `{asterisk}.pack` file is smaller than 2 GB, however,
+older version of git. If the `*.pack` file is smaller than 2 GB, however,
you can use linkgit:git-index-pack[1] on the *.pack file to regenerate
-the `{asterisk}.idx` file.
+the `*.idx` file.
pack.packSizeLimit::
The maximum size of a pack. This setting only affects
packing to a file when repacking, i.e. the git:// protocol
- is unaffected. It can be overridden by the `\--max-pack-size`
+ is unaffected. It can be overridden by the `--max-pack-size`
option of linkgit:git-repack[1]. The minimum size allowed is
limited to 1 MiB. The default is unlimited.
Common unit suffixes of 'k', 'm', or 'g' are
supported.
pager.<cmd>::
- Allows turning on or off pagination of the output of a
- particular git subcommand when writing to a tty. If
- `\--paginate` or `\--no-pager` is specified on the command line,
- it takes precedence over this option. To disable pagination for
- all commands, set `core.pager` or `GIT_PAGER` to `cat`.
+ If the value is boolean, turns on or off pagination of the
+ output of a particular git subcommand when writing to a tty.
+ Otherwise, turns on pagination for the subcommand using the
+ pager specified by the value of `pager.<cmd>`. If `--paginate`
+ or `--no-pager` is specified on the command line, it takes
+ precedence over this option. To disable pagination for all
+ commands, set `core.pager` or `GIT_PAGER` to `cat`.
pretty.<name>::
Alias for a --pretty= format string, as specified in
linkgit:git-log[1]. Any aliases defined here can be used just
as the built-in pretty formats could. For example,
- running `git config pretty.changelog "format:{asterisk} %H %s"`
+ running `git config pretty.changelog "format:* %H %s"`
would cause the invocation `git log --pretty=changelog`
- to be equivalent to running `git log "--pretty=format:{asterisk} %H %s"`.
+ to be equivalent to running `git log "--pretty=format:* %H %s"`.
Note that an alias with the same name as a built-in format
will be silently ignored.
+pull.rebase::
+ When true, rebase branches on top of the fetched branch, instead
+ of merging the default branch from the default remote when "git
+ pull" is run. See "branch.<name>.rebase" for setting this on a
+ per-branch basis.
++
+*NOTE*: this is a possibly dangerous operation; do *not* use
+it unless you understand the implications (see linkgit:git-rebase[1]
+for details).
+
pull.octopus::
The default merge strategy to use when pulling multiple branches
at once.
no refspec is implied by any of the options given on the command
line. Possible values are:
+
-* `nothing` do not push anything.
-* `matching` push all matching branches.
- All branches having the same name in both ends are considered to be
- matching. This is the default.
-* `tracking` push the current branch to its upstream branch.
-* `current` push the current branch to a branch of the same name.
+* `nothing` - do not push anything.
+* `matching` - push all branches having the same name in both ends.
+ This is for those who prepare all the branches into a publishable
+ shape and then push them out with a single command. It is not
+ appropriate for pushing into a repository shared by multiple users,
+ since locally stalled branches will attempt a non-fast forward push
+ if other users updated the branch.
+ +
+ This is currently the default, but Git 2.0 will change the default
+ to `simple`.
+* `upstream` - push the current branch to its upstream branch.
+ With this, `git push` will update the same remote ref as the one which
+ is merged by `git pull`, making `push` and `pull` symmetrical.
+ See "branch.<name>.merge" for how to configure the upstream branch.
+* `simple` - like `upstream`, but refuses to push if the upstream
+ branch's name is different from the local one. This is the safest
+ option and is well-suited for beginners. It will become the default
+ in Git 2.0.
+* `current` - push the current branch to a branch of the same name.
+ +
+ The `simple`, `current` and `upstream` modes are for those who want to
+ push out a single branch after finishing work, even when the other
+ branches are not yet ready to be pushed out. If you are working with
+ other people to push into the same shared repository, you would want
+ to use one of these.
rebase.stat::
Whether to show a diffstat of what changed upstream since the last
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
broken link. The result of an abort are only dangling objects.
- Defaults to false.
+ Defaults to false. If not set, the value of `transfer.fsckObjects`
+ is used instead.
receive.unpackLimit::
If the number of objects received in a push is below this
remote.<name>.mirror::
If true, pushing to this remote will automatically behave
- as if the `\--mirror` option was given on the command line.
+ as if the `--mirror` option was given on the command line.
remote.<name>.skipDefaultUpdate::
If true, this remote will be skipped by default when updating
rerere.enabled::
Activate recording of resolved conflicts, so that identical
- conflict hunks can be resolved automatically, should they
- be encountered again. linkgit:git-rerere[1] command is by
- default enabled if you create `rr-cache` directory under
- `$GIT_DIR`, but can be disabled by setting this option to false.
+ conflict hunks can be resolved automatically, should they be
+ encountered again. By default, linkgit:git-rerere[1] is
+ enabled if there is an `rr-cache` directory under the
+ `$GIT_DIR`, e.g. if "rerere" was previously used in the
+ repository.
sendemail.identity::
A configuration identity. When given, causes values in the
sendemail.smtpdomain::
sendemail.smtpserver::
sendemail.smtpserverport::
+sendemail.smtpserveroption::
sendemail.smtpuser::
sendemail.thread::
sendemail.validate::
the untracked files. Possible values are:
+
--
- - 'no' - Show no untracked files
- - 'normal' - Shows untracked files and directories
- - 'all' - Shows also individual files in untracked directories.
+* `no` - Show no untracked files.
+* `normal` - Show untracked files and directories.
+* `all` - Show also individual files in untracked directories.
--
+
If this variable is not specified, it defaults to 'normal'.
URL and other values found in the `.gitmodules` file. See
linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+submodule.<name>.fetchRecurseSubmodules::
+ This option can be used to control recursive fetching of this
+ submodule. It can be overridden by using the --[no-]recurse-submodules
+ command line option to "git fetch" and "git pull".
+ This setting will override that from in the linkgit:gitmodules[5]
+ file.
+
submodule.<name>.ignore::
Defines under what circumstances "git status" and the diff family show
a submodule as modified. When set to "all", it will never be considered
archiving user's umask will be used instead. See umask(2) and
linkgit:git-archive[1].
+transfer.fsckObjects::
+ When `fetch.fsckObjects` or `receive.fsckObjects` are
+ not set, the value of this variable is used instead.
+ Defaults to false.
+
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
not set, the value of this variable is used instead.