NAME
----
-git-ls-files - Information about files in the index/working directory
+git-ls-files - Show information about files in the index and the working tree
SYNOPSIS
(-[c|d|o|i|s|u|k|m])\*
[-x <pattern>|--exclude=<pattern>]
[-X <file>|--exclude-from=<file>]
- [--exclude-per-directory=<file>]
- [--full-name] [--] [<file>]\*
+ [--exclude-per-directory=<file>]
+ [--exclude-standard]
+ [--error-unmatch] [--with-tree=<tree-ish>]
+ [--full-name] [--abbrev] [--] [<file>]\*
DESCRIPTION
-----------
Show other files in the output
-i|--ignored::
- Show ignored files in the output
- Note the this also reverses any exclude list present.
+ Show ignored files in the output.
+ Note that this also reverses any exclude list present.
-s|--stage::
Show stage files in the output
If a whole directory is classified as "other", show just its
name (with a trailing slash) and not its whole contents.
+--no-empty-directory::
+ Do not list empty directories. Has no effect without --directory.
+
-u|--unmerged::
Show unmerged files in the output (forces --stage)
read additional exclude patterns that apply only to the
directory and its subdirectories in <file>.
+--exclude-standard::
+ Add the standard git exclusions: .git/info/exclude, .gitignore
+ in each directory, and the user's global exclusion file.
+
+--error-unmatch::
+ If any <file> does not appear in the index, treat this as an
+ error (return 1).
+
+--with-tree=<tree-ish>::
+ When using --error-unmatch to expand the user supplied
+ <file> (i.e. path pattern) arguments to paths, pretend
+ that paths which were removed in the index since the
+ named <tree-ish> are still present. Using this option
+ with `-s` or `-u` options does not make any sense.
+
-t::
Identify the file status with the following tags (followed by
a space) at the start of each line:
R:: removed/deleted
C:: modified/changed
K:: to be killed
- ? other
+ ?:: other
-v::
Similar to `-t`, but use lowercase letters for files
- that are marked as 'always matching index'.
+ that are marked as 'assume unchanged' (see
+ linkgit:git-update-index[1]).
--full-name::
When run from a subdirectory, the command usually
option forces paths to be output relative to the project
top directory.
---::
+--abbrev[=<n>]::
+ Instead of showing the full 40-byte hexadecimal object
+ lines, show only handful hexdigits prefix.
+ Non default number of digits can be specified with --abbrev=<n>.
+
+\--::
Do not interpret any more arguments as options.
<file>::
detailed information on unmerged paths.
For an unmerged path, instead of recording a single mode/SHA1 pair,
-the dircache records up to three such pairs; one from tree O in stage
+the index records up to three such pairs; one from tree O in stage
1, A in stage 2, and B in stage 3. This information can be used by
the user (or the porcelain) to see what should eventually be recorded at the
path. (see git-read-tree for more information on state)
'git-ls-files' can use a list of "exclude patterns" when
traversing the directory tree and finding files to show when the
-flags --others or --ignored are specified.
+flags --others or --ignored are specified. linkgit:gitignore[5]
+specifies the format of exclude patterns.
-These exclude patterns come from these places:
+These exclude patterns come from these places, in order:
- 1. command line flag --exclude=<pattern> specifies a single
- pattern.
+ 1. The command line flag --exclude=<pattern> specifies a
+ single pattern. Patterns are ordered in the same order
+ they appear in the command line.
- 2. command line flag --exclude-from=<file> specifies a list of
- patterns stored in a file.
+ 2. The command line flag --exclude-from=<file> specifies a
+ file containing a list of patterns. Patterns are ordered
+ in the same order they appear in the file.
3. command line flag --exclude-per-directory=<name> specifies
a name of the file in each directory 'git-ls-files'
- examines, and if exists, its contents are used as an
- additional list of patterns.
-
-An exclude pattern file used by (2) and (3) contains one pattern
-per line. A line that starts with a '#' can be used as comment
-for readability.
-
-There are three lists of patterns that are in effect at a given
-time. They are built and ordered in the following way:
-
- * --exclude=<pattern> from the command line; patterns are
- ordered in the same order as they appear on the command line.
-
- * lines read from --exclude-from=<file>; patterns are ordered
- in the same order as they appear in the file.
-
- * When --exclude-per-directory=<name> is specified, upon
- entering a directory that has such a file, its contents are
- appended at the end of the current "list of patterns". They
- are popped off when leaving the directory.
-
-Each pattern in the pattern list specifies "a match pattern" and
-optionally the fate; either a file that matches the pattern is
-considered excluded or included. A filename is matched against
-the patterns in the three lists; the --exclude-from list is
-checked first, then the --exclude-per-directory list, and then
-finally the --exclude list. The last match determines its fate.
-If there is no match in the three lists, the fate is "included".
+ examines, normally `.gitignore`. Files in deeper
+ directories take precedence. Patterns are ordered in the
+ same order they appear in the files.
A pattern specified on the command line with --exclude or read
from the file specified with --exclude-from is relative to the
by --exclude-per-directory is relative to the directory that the
pattern file appears in.
-An exclude pattern is of the following format:
-
- - an optional prefix '!' which means that the fate this pattern
- specifies is "include", not the usual "exclude"; the
- remainder of the pattern string is interpreted according to
- the following rules.
-
- - if it does not contain a slash '/', it is a shell glob
- pattern and used to match against the filename without
- leading directories (i.e. the same way as the current
- implementation).
-
- - otherwise, it is a shell glob pattern, suitable for
- consumption by fnmatch(3) with FNM_PATHNAME flag. I.e. a
- slash in the pattern must match a slash in the pathname.
- "Documentation/\*.html" matches "Documentation/git.html" but
- not "ppc/ppc.html". As a natural exception, "/*.c" matches
- "cat-file.c" but not "mozilla-sha1/sha1.c".
-
-An example:
-
---------------------------------------------------------------
- $ cat .git/ignore
- # ignore objects and archives, anywhere in the tree.
- *.[oa]
- $ cat Documentation/.gitignore
- # ignore generated html files,
- *.html
- # except foo.html which is maintained by hand
- !foo.html
- $ git-ls-files --ignored \
- --exclude='Documentation/*.[0-9]' \
- --exclude-from=.git/ignore \
- --exclude-per-directory=.gitignore
---------------------------------------------------------------
-
-
See Also
--------
-gitlink:git-read-tree[1]
+linkgit:git-read-tree[1], linkgit:gitignore[5]
Author
Documentation
--------------
-Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
+Documentation by David Greaves, Junio C Hamano, Josh Triplett, and the git-list <git@vger.kernel.org>.
GIT
---
-Part of the gitlink:git[7] suite
-
+Part of the linkgit:git[7] suite