# Repeat until no more failures
$ prove -j 15 --state=failed,save ./t[0-9]*.sh
+You can give DEFAULT_TEST_TARGET=prove on the make command (or define it
+in config.mak) to cause "make test" to run tests under prove.
+GIT_PROVE_OPTS can be used to pass additional options, e.g.
+
+ $ make DEFAULT_TEST_TARGET=prove GIT_PROVE_OPTS='--timer --jobs 16' test
+
You can also run each test individually from command line, like this:
$ sh ./t3010-ls-files-killed-modified.sh
(or -i) command line argument to the test, or by setting GIT_TEST_OPTS
appropriately before running "make".
+-v::
--verbose::
This makes the test more verbose. Specifically, the
command being run and their output if any are also
output.
+--verbose-only=<pattern>::
+ Like --verbose, but the effect is limited to tests with
+ numbers matching <pattern>. The number matched against is
+ simply the running count of the test within the file.
+
+-x::
+ Turn on shell tracing (i.e., `set -x`) during the tests
+ themselves. Implies `--verbose`. Note that this can cause
+ failures in some tests which redirect and test the
+ output of shell functions. Use with caution.
+
+-d::
--debug::
This may help the person who is developing a new test.
It causes the command defined with test_debug to run.
+ The "trash" directory (used to store all temporary data
+ during testing) is not deleted even if there are no
+ failed tests so that you can inspect its contents after
+ the test finished.
+-i::
--immediate::
This causes the test to immediately exit upon the first
- failed test.
+ failed test. Cleanup commands requested with
+ test_when_finished are not executed if the test failed,
+ in order to keep the state for inspection by the tester
+ to diagnose the bug.
+-l::
--long-tests::
This causes additional long-running tests to be run (where
available), for more exhaustive testing.
---valgrind::
- Execute all Git binaries with valgrind and exit with status
- 126 on errors (just like regular tests, this will only stop
- the test script when running under -i). Valgrind errors
- go to stderr, so you might want to pass the -v option, too.
+-r::
+--run=<test-selector>::
+ Run only the subset of tests indicated by
+ <test-selector>. See section "Skipping Tests" below for
+ <test-selector> syntax.
+
+--valgrind=<tool>::
+ Execute all Git binaries under valgrind tool <tool> and exit
+ with status 126 on errors (just like regular tests, this will
+ only stop the test script when running under -i).
Since it makes no sense to run the tests with --valgrind and
not see any output, this option implies --verbose. For
convenience, it also implies --tee.
+ <tool> defaults to 'memcheck', just like valgrind itself.
+ Other particularly useful choices include 'helgrind' and
+ 'drd', but you may use any tool recognized by your valgrind
+ installation.
+
+ As a special case, <tool> can be 'memcheck-fast', which uses
+ memcheck but disables --track-origins. Use this if you are
+ running tests in bulk, to see if there are _any_ memory
+ issues.
+
+ Note that memcheck is run with the option --leak-check=no,
+ as the git process is short-lived and some errors are not
+ interesting. In order to run a single command under the same
+ conditions manually, you should set GIT_VALGRIND to point to
+ the 't/valgrind/' directory and use the commands under
+ 't/valgrind/bin/'.
+
+--valgrind-only=<pattern>::
+ Like --valgrind, but the effect is limited to tests with
+ numbers matching <pattern>. The number matched against is
+ simply the running count of the test within the file.
+
--tee::
In addition to printing the test output to the terminal,
write it to files named 't/test-results/$TEST_NAME.out'.
Using this option with a RAM-based filesystem (such as tmpfs)
can massively speed up the test suite.
+--chain-lint::
+--no-chain-lint::
+ If --chain-lint is enabled, the test harness will check each
+ test to make sure that it properly "&&-chains" all commands (so
+ that a failure in the middle does not go unnoticed by the final
+ exit code of the test). This check is performed in addition to
+ running the tests themselves. You may also enable or disable
+ this feature by setting the GIT_TEST_CHAIN_LINT environment
+ variable to "1" or "0", respectively.
+
You can also set the GIT_TEST_INSTALLED environment variable to
the bindir of an existing git installation to test that installation.
You still need to have built this git sandbox, from which various
test, or t[0-9]{4} followed by ".$number" to say which
particular test to skip.
-Note that some tests in the existing test suite rely on previous
-test item, so you cannot arbitrarily disable one and expect the
-remainder of test to check what the test originally was intended
-to check.
+For an individual test suite --run could be used to specify that
+only some tests should be run or that some tests should be
+excluded from a run.
+
+The argument for --run is a list of individual test numbers or
+ranges with an optional negation prefix that define what tests in
+a test suite to include in the run. A range is two numbers
+separated with a dash and matches a range of tests with both ends
+been included. You may omit the first or the second number to
+mean "from the first test" or "up to the very last test"
+respectively.
+
+Optional prefix of '!' means that the test or a range of tests
+should be excluded from the run.
+
+If --run starts with an unprefixed number or range the initial
+set of tests to run is empty. If the first item starts with '!'
+all the tests are added to the initial set. After initial set is
+determined every test number or range is added or excluded from
+the set one by one, from left to right.
+
+Individual numbers or ranges could be separated either by a space
+or a comma.
+
+For example, to run only tests up to a specific test (21), one
+could do this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='1-21'
+
+or this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='-21'
+
+Common case is to run several setup tests (1, 2, 3) and then a
+specific test (21) that relies on that setup:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21'
+
+or:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run=1,2,3,21
+
+or:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21'
+
+As noted above, the test set is built going though items left to
+right, so this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3'
+
+will run tests 1, 2, and 4. Items that comes later have higher
+precendence. It means that this:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='!3 1-4'
+
+would just run tests from 1 to 4, including 3.
+
+You may use negation with ranges. The following will run all
+test in the test suite except from 7 up to 11:
+
+ $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11'
+
+Some tests in a test suite rely on the previous tests performing
+certain actions, specifically some tests are designated as
+"setup" test, so you cannot _arbitrarily_ disable one test and
+expect the rest to function correctly.
+
+--run is mostly useful when you want to focus on a specific test
+and know what setup is needed for it. Or when you want to run
+everything up to a certain test.
Naming Tests
If you create files under t/ directory (i.e. here) that is not
the top-level test script, never name the file to match the above
pattern. The Makefile here considers all such files as the
-top-level test script and tries to run all of them. A care is
+top-level test script and tries to run all of them. Care is
especially needed if you are creating a common test library
file, similar to test-lib.sh, because such a library file may
not be suitable for standalone execution.
test ...
That way all of the commands in your tests will succeed or fail. If
- you must ignore the return value of something (e.g., the return
- after unsetting a variable that was already unset is unportable) it's
- best to indicate so explicitly with a semicolon:
+ you must ignore the return value of something, consider using a
+ helper function (e.g. use sane_unset instead of unset, in order
+ to avoid unportable return value for unsetting a variable that was
+ already unset), or prepending the command with test_might_fail or
+ test_must_fail.
- unset HLAGH;
- git merge hla &&
- git push gh &&
- test ...
+ - Check the test coverage for your tests. See the "Test coverage"
+ below.
+
+ Don't blindly follow test coverage metrics; if a new function you added
+ doesn't have any coverage, then you're probably doing something wrong,
+ but having 100% coverage doesn't necessarily mean that you tested
+ everything.
+
+ Tests that are likely to smoke out future regressions are better
+ than tests that just inflate the coverage metrics.
+
+ - When a test checks for an absolute path that a git command generated,
+ construct the expected value using $(pwd) rather than $PWD,
+ $TEST_DIRECTORY, or $TRASH_DIRECTORY. It makes a difference on
+ Windows, where the shell (MSYS bash) mangles absolute path names.
+ For details, see the commit message of 4114156ae9.
Don't:
Use test_done instead if you need to stop the tests early (see
"Skipping tests" below).
+ - use '! git cmd' when you want to make sure the git command exits
+ with failure in a controlled way by calling "die()". Instead,
+ use 'test_must_fail git cmd'. This will signal a failure if git
+ dies in an unexpected way (e.g. segfault).
+
+ On the other hand, don't use test_must_fail for running regular
+ platform commands; just use '! cmd'. We are not in the business
+ of verifying that the world given to us sanely works.
+
+ - use perl without spelling it as "$PERL_PATH". This is to help our
+ friends on Windows where the platform Perl often adds CR before
+ the end of line, and they bundle Git with a version of Perl that
+ does not do so, whose path is specified with $PERL_PATH. Note that we
+ provide a "perl" function which uses $PERL_PATH under the hood, so
+ you do not need to worry when simply running perl in the test scripts
+ (but you do, for example, on a shebang line or in a sub script
+ created via "write_script").
+
+ - use sh without spelling it as "$SHELL_PATH", when the script can
+ be misinterpreted by broken platform shell (e.g. Solaris).
+
+ - chdir around in tests. It is not sufficient to chdir to
+ somewhere and then chdir back to the original location later in
+ the test, as any intermediate step can fail and abort the test,
+ causing the next test to start in an unexpected directory. Do so
+ inside a subshell if necessary.
+
- Break the TAP output
The raw output from your test may be interpreted by a TAP harness. TAP
Skipping tests
--------------
-If you need to skip all the remaining tests you should set skip_all
-and immediately call test_done. The string you give to skip_all will
-be used as an explanation for why the test was skipped. for instance:
+If you need to skip tests you should do so by using the three-arg form
+of the test_* functions (see the "Test harness library" section
+below), e.g.:
+
+ test_expect_success PERL 'I need Perl' '
+ perl -e "hlagh() if unf_unf()"
+ '
+
+The advantage of skipping tests like this is that platforms that don't
+have the PERL and other optional dependencies get an indication of how
+many tests they're missing.
+
+If the test code is too hairy for that (i.e. does a lot of setup work
+outside test assertions) you can also skip all remaining tests by
+setting skip_all and immediately call test_done:
if ! test_have_prereq PERL
then
test_done
fi
+The string you give to skip_all will be used as an explanation for why
+the test was skipped.
+
End with test_done
------------------
- test_expect_success [<prereq>] <message> <script>
- Usually takes two strings as parameter, and evaluates the
+ Usually takes two strings as parameters, and evaluates the
<script>. If it yields success, test is considered
successful. <message> should state what it is testing.
'tree=$(git-write-tree)'
If you supply three parameters the first will be taken to be a
- prerequisite, see the test_set_prereq and test_have_prereq
+ prerequisite; see the test_set_prereq and test_have_prereq
documentation below:
test_expect_success TTY 'git --paginate rev-list uses a pager' \
' ... '
+ You can also supply a comma-separated list of prerequisites, in the
+ rare case where your test depends on more than one:
+
+ test_expect_success PERL,PYTHON 'yo dawg' \
+ ' test $(perl -E 'print eval "1 +" . qx[python -c "print 2"]') == "4" '
+
- test_expect_failure [<prereq>] <message> <script>
This is NOT the opposite of test_expect_success, but is used
Like test_expect_success this function can optionally use a three
argument invocation with a prerequisite as the first argument.
- - test_expect_code [<prereq>] <code> <message> <script>
-
- Analogous to test_expect_success, but pass the test if it exits
- with a given exit <code>
-
- test_expect_code 1 'Merge with d/f conflicts' 'git merge "merge msg" B master'
-
- test_debug <script>
This takes a single argument, <script>, and evaluates it only
- test_tick
Make commit and tag names consistent by setting the author and
- committer times to defined stated. Subsequent calls will
+ committer times to defined state. Subsequent calls will
advance the times by a fixed amount.
- test_commit <message> [<filename> [<contents>]]
Merges the given rev using the given message. Like test_commit,
creates a tag and calls test_tick before committing.
- - test_set_prereq SOME_PREREQ
+ - test_set_prereq <prereq>
Set a test prerequisite to be used later with test_have_prereq. The
- test-lib will set some prerequisites for you, e.g. PERL and PYTHON
- which are derived from ./GIT-BUILD-OPTIONS (grep test_set_prereq
- test-lib.sh for more). Others you can set yourself and use later
- with either test_have_prereq directly, or the three argument
- invocation of test_expect_success and test_expect_failure.
+ test-lib will set some prerequisites for you, see the
+ "Prerequisites" section below for a full list of these.
+
+ Others you can set yourself and use later with either
+ test_have_prereq directly, or the three argument invocation of
+ test_expect_success and test_expect_failure.
- - test_have_prereq SOME PREREQ
+ - test_have_prereq <prereq>
Check if we have a prerequisite previously set with
test_set_prereq. The most common use of this directly is to skip
test_external \
'GitwebCache::*FileCache*' \
- "$PERL_PATH" "$TEST_DIRECTORY"/t9503/test_cache_interface.pl
+ perl "$TEST_DIRECTORY"/t9503/test_cache_interface.pl
If the test is outputting its own TAP you should set the
test_external_has_tap variable somewhere before calling the first
test_external_without_stderr \
'Perl API' \
- "$PERL_PATH" "$TEST_DIRECTORY"/t9700/test.pl
+ perl "$TEST_DIRECTORY"/t9700/test.pl
+
+ - test_expect_code <exit-code> <command>
+
+ Run a command and ensure that it exits with the given exit code.
+ For example:
+
+ test_expect_success 'Merge with d/f conflicts' '
+ test_expect_code 1 git merge "merge msg" B master
+ '
- test_must_fail <git-command>
<expected> file. This behaves like "cmp" but produces more
helpful output when the test is run with "-v" option.
+ - test_line_count (= | -lt | -ge | ...) <length> <file>
+
+ Check whether a file has the length it is expected to.
+
+ - test_path_is_file <path> [<diagnosis>]
+ test_path_is_dir <path> [<diagnosis>]
+ test_path_is_missing <path> [<diagnosis>]
+
+ Check if the named path is a file, if the named path is a
+ directory, or if the named path does not exist, respectively,
+ and fail otherwise, showing the <diagnosis> text.
+
- test_when_finished <script>
Prepend <script> to a list of commands to run to clean up
...
'
+ - test_write_lines <lines>
+
+ Write <lines> on standard output, one line per argument.
+ Useful to prepare multi-line files in a compact form.
+
+ Example:
+
+ test_write_lines a b c d e f g >foo
+
+ Is a more compact equivalent of:
+ cat >foo <<-EOF
+ a
+ b
+ c
+ d
+ e
+ f
+ g
+ EOF
+
+
+ - test_pause
+
+ This command is useful for writing and debugging tests and must be
+ removed before submitting. It halts the execution of the test and
+ spawns a shell in the trash directory. Exit the shell to continue
+ the test. Example:
+
+ test_expect_success 'test' '
+ git do-something >actual &&
+ test_pause &&
+ test_cmp expected actual
+ '
+
+ - test_ln_s_add <path1> <path2>
+
+ This function helps systems whose filesystem does not support symbolic
+ links. Use it to add a symbolic link entry to the index when it is not
+ important that the file system entry is a symbolic link, i.e., instead
+ of the sequence
+
+ ln -s foo bar &&
+ git add bar
+
+ Sometimes it is possible to split a test in a part that does not need
+ the symbolic link in the file system and a part that does; then only
+ the latter part need be protected by a SYMLINKS prerequisite (see below).
+
+Prerequisites
+-------------
+
+These are the prerequisites that the test library predefines with
+test_have_prereq.
+
+See the prereq argument to the test_* functions in the "Test harness
+library" section above and the "test_have_prereq" function for how to
+use these, and "test_set_prereq" for how to define your own.
+
+ - PYTHON
+
+ Git wasn't compiled with NO_PYTHON=YesPlease. Wrap any tests that
+ need Python with this.
+
+ - PERL
+
+ Git wasn't compiled with NO_PERL=YesPlease.
+
+ Even without the PERL prerequisite, tests can assume there is a
+ usable perl interpreter at $PERL_PATH, though it need not be
+ particularly modern.
+
+ - POSIXPERM
+
+ The filesystem supports POSIX style permission bits.
+
+ - BSLASHPSPEC
+
+ Backslashes in pathspec are not directory separators. This is not
+ set on Windows. See 6fd1106a for details.
+
+ - EXECKEEPSPID
+
+ The process retains the same pid across exec(2). See fb9a2bea for
+ details.
+
+ - PIPE
+
+ The filesystem we're on supports creation of FIFOs (named pipes)
+ via mkfifo(1).
+
+ - SYMLINKS
+
+ The filesystem we're on supports symbolic links. E.g. a FAT
+ filesystem doesn't support these. See 704a3143 for details.
+
+ - SANITY
+
+ Test is not run by root user, and an attempt to write to an
+ unwritable file is expected to fail correctly.
+
+ - LIBPCRE
+
+ Git was compiled with USE_LIBPCRE=YesPlease. Wrap any tests
+ that use git-grep --perl-regexp or git-grep -P in these.
+
+ - CASE_INSENSITIVE_FS
+
+ Test is run on a case insensitive file system.
+
+ - UTF8_NFD_TO_NFC
+
+ Test is run on a filesystem which converts decomposed utf-8 (nfd)
+ to precomposed utf-8 (nfc).
Tips for Writing Tests
----------------------
validation in one place. Your test also ends up needing
updating when such a change to the internal happens, so do _not_
do it and leave the low level of validation to t0000-basic.sh.
+
+Test coverage
+-------------
+
+You can use the coverage tests to find code paths that are not being
+used or properly exercised yet.
+
+To do that, run the coverage target at the top-level (not in the t/
+directory):
+
+ make coverage
+
+That'll compile Git with GCC's coverage arguments, and generate a test
+report with gcov after the tests finish. Running the coverage tests
+can take a while, since running the tests in parallel is incompatible
+with GCC's coverage mode.
+
+After the tests have run you can generate a list of untested
+functions:
+
+ make coverage-untested-functions
+
+You can also generate a detailed per-file HTML report using the
+Devel::Cover module. To install it do:
+
+ # On Debian or Ubuntu:
+ sudo aptitude install libdevel-cover-perl
+
+ # From the CPAN with cpanminus
+ curl -L http://cpanmin.us | perl - --sudo --self-upgrade
+ cpanm --sudo Devel::Cover
+
+Then, at the top-level:
+
+ make cover_db_html
+
+That'll generate a detailed cover report in the "cover_db_html"
+directory, which you can then copy to a webserver, or inspect locally
+in a browser.