--annotate::
Review and edit each patch you're about to send. Default is the value
- of 'sendemail.annotate'. See the CONFIGURATION section for
- 'sendemail.multiEdit'.
+ of `sendemail.annotate`. See the CONFIGURATION section for
+ `sendemail.multiEdit`.
--bcc=<address>,...::
Specify a "Bcc:" value for each email. Default is the value of
- 'sendemail.bcc'.
+ `sendemail.bcc`.
+
This option may be specified multiple times.
--cc=<address>,...::
Specify a starting "Cc:" value for each email.
- Default is the value of 'sendemail.cc'.
+ Default is the value of `sendemail.cc`.
+
This option may be specified multiple times.
Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1])
to edit an introductory message for the patch series.
+
-When '--compose' is used, git send-email will use the From, Subject, and
+When `--compose` is used, git send-email will use the From, Subject, and
In-Reply-To headers specified in the message. If the body of the message
(what you type after the headers and a blank line) only contains blank
(or Git: prefixed) lines, the summary won't be sent, but From, Subject,
+
Missing From or In-Reply-To headers will be prompted for.
+
-See the CONFIGURATION section for 'sendemail.multiEdit'.
+See the CONFIGURATION section for `sendemail.multiEdit`.
--from=<address>::
Specify the sender of the emails. If not specified on the command line,
- the value of the 'sendemail.from' configuration option is used. If
- neither the command-line option nor 'sendemail.from' are set, then the
+ the value of the `sendemail.from` configuration option is used. If
+ neither the command-line option nor `sendemail.from` are set, then the
user will be prompted for the value. The default for the prompt will be
the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
set, as returned by "git var -l".
--to=<address>,...::
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
- value of the 'sendemail.to' configuration value; if that is unspecified,
+ value of the `sendemail.to` configuration value; if that is unspecified,
and --to-cmd is not specified, this will be prompted for.
+
This option may be specified multiple times.
can be useful when the repository contains files that contain carriage
returns, but makes the raw patch email file (as saved from a MUA) much
harder to inspect manually. base64 is even more fool proof, but also
- even more opaque. Default is the value of the 'sendemail.transferEncoding'
+ even more opaque. Default is the value of the `sendemail.transferEncoding`
configuration value; if that is unspecified, git will use 8bit and not
add a Content-Transfer-Encoding header.
subscribed to a list. In order to use the 'From' address, set the
value to "auto". If you use the sendmail binary, you must have
suitable privileges for the -f parameter. Default is the value of the
- 'sendemail.envelopeSender' configuration variable; if that is
+ `sendemail.envelopeSender` configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
--smtp-encryption=<encryption>::
Specify the encryption to use, either 'ssl' or 'tls'. Any other
value reverts to plain SMTP. Default is the value of
- 'sendemail.smtpEncryption'.
+ `sendemail.smtpEncryption`.
--smtp-domain=<FQDN>::
Specifies the Fully Qualified Domain Name (FQDN) used in the
HELO/EHLO command to the SMTP server. Some servers require the
FQDN to match your IP address. If not set, git send-email attempts
to determine your FQDN automatically. Default is the value of
- 'sendemail.smtpDomain'.
+ `sendemail.smtpDomain`.
--smtp-auth=<mechanisms>::
Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting
+
If at least one of the specified mechanisms matches the ones advertised by the
SMTP server and if it is supported by the utilized SASL library, the mechanism
-is used for authentication. If neither 'sendemail.smtpAuth' nor '--smtp-auth'
+is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth`
is specified, all mechanisms supported by the SASL library can be used.
--smtp-pass[=<password>]::
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
- the password. Default is the value of 'sendemail.smtpPass',
- however '--smtp-pass' always overrides this value.
+ the password. Default is the value of `sendemail.smtpPass`,
+ however `--smtp-pass` always overrides this value.
+
Furthermore, passwords need not be specified in configuration files
or on the command line. If a username has been specified (with
-'--smtp-user' or a 'sendemail.smtpUser'), but no password has been
-specified (with '--smtp-pass' or 'sendemail.smtpPass'), then
+`--smtp-user` or a `sendemail.smtpUser`), but no password has been
+specified (with `--smtp-pass` or `sendemail.smtpPass`), then
a password is obtained using 'git-credential'.
--smtp-server=<host>::
`smtp.example.com` or a raw IP address). Alternatively it can
specify a full pathname of a sendmail-like program instead;
the program must support the `-i` option. Default value can
- be specified by the 'sendemail.smtpServer' configuration
+ be specified by the `sendemail.smtpServer` configuration
option; the built-in default is `/usr/sbin/sendmail` or
`/usr/lib/sendmail` if such program is available, or
`localhost` otherwise.
submission port 587, or the common SSL smtp port 465);
symbolic port names (e.g. "submission" instead of 587)
are also accepted. The port can also be set with the
- 'sendemail.smtpServerPort' configuration variable.
+ `sendemail.smtpServerPort` configuration variable.
--smtp-server-option=<option>::
If set, specifies the outgoing SMTP server option to use.
- Default value can be specified by the 'sendemail.smtpServerOption'
+ Default value can be specified by the `sendemail.smtpServerOption`
configuration option.
+
The --smtp-server-option option must be repeated for each option you want
certificates concatenated together: see verify(1) -CAfile and
-CApath for more information on these). Set it to an empty string
to disable certificate verification. Defaults to the value of the
- 'sendemail.smtpsslcertpath' configuration variable, if set, or the
+ `sendemail.smtpsslcertpath` configuration variable, if set, or the
backing SSL library's compiled-in default otherwise (which should
be the best choice on most platforms).
--smtp-user=<user>::
- Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser';
- if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'),
+ Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`;
+ if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`),
then authentication is not attempted.
--smtp-debug=0|1::
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
- Default is the value of 'sendemail.ccCmd' configuration value.
+ Default is the value of `sendemail.ccCmd` configuration value.
--[no-]chain-reply-to::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
this, it is recommended that the first file given be an overview of the
- entire patch series. Disabled by default, but the 'sendemail.chainReplyTo'
+ entire patch series. Disabled by default, but the `sendemail.chainReplyTo`
configuration variable can be used to enable it.
--identity=<identity>::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
- the value of 'sendemail.identity'.
+ the value of `sendemail.identity`.
--[no-]signed-off-by-cc::
If this is set, add emails found in Signed-off-by: or Cc: lines to the
- cc list. Default is the value of 'sendemail.signedoffbycc' configuration
+ cc list. Default is the value of `sendemail.signedoffbycc` configuration
value; if that is unspecified, default to --signed-off-by-cc.
--[no-]cc-cover::
- 'all' will suppress all auto cc values.
--
+
-Default is the value of 'sendemail.suppresscc' configuration value; if
+Default is the value of `sendemail.suppresscc` configuration value; if
that is unspecified, default to 'self' if --suppress-from is
specified, as well as 'body' if --no-signed-off-cc is specified.
--[no-]suppress-from::
If this is set, do not add the From: address to the cc: list.
- Default is the value of 'sendemail.suppressFrom' configuration
+ Default is the value of `sendemail.suppressFrom` configuration
value; if that is unspecified, default to --no-suppress-from.
--[no-]thread::
+
If disabled with "--no-thread", those headers will not be added
(unless specified with --in-reply-to). Default is the value of the
-'sendemail.thread' configuration value; if that is unspecified,
+`sendemail.thread` configuration value; if that is unspecified,
default to --thread.
+
It is up to the user to ensure that no In-Reply-To header already
- 'auto' is equivalent to 'cc' + 'compose'
--
+
-Default is the value of 'sendemail.confirm' configuration value; if that
+Default is the value of `sendemail.confirm` configuration value; if that
is unspecified, default to 'auto' unless any of the suppress options
have been specified, in which case default to 'compose'.
--[no-]format-patch::
When an argument may be understood either as a reference or as a file name,
- choose to understand it as a format-patch argument ('--format-patch')
- or as a file name ('--no-format-patch'). By default, when such a conflict
+ choose to understand it as a format-patch argument (`--format-patch`)
+ or as a file name (`--no-format-patch`). By default, when such a conflict
occurs, git send-email will fail.
--quiet::
is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.
--
+
-Default is the value of 'sendemail.validate'; if this is not set,
-default to '--validate'.
+Default is the value of `sendemail.validate`; if this is not set,
+default to `--validate`.
--force::
Send emails even if safety checks would prevent it.
sendemail.aliasesFile::
To avoid typing long email addresses, point this to one or more
- email aliases files. You must also supply 'sendemail.aliasFileType'.
+ email aliases files. You must also supply `sendemail.aliasFileType`.
sendemail.aliasFileType::
Format of the file(s) specified in sendemail.aliasesFile. Must be
sendemail.multiEdit::
If true (default), a single editor instance will be spawned to edit
- files you have to edit (patches when '--annotate' is used, and the
- summary when '--compose' is used). If false, files will be edited one
+ files you have to edit (patches when `--annotate` is used, and the
+ summary when `--compose` is used). If false, files will be edited one
after the other, spawning a new editor each time.
sendemail.confirm::
Sets the default for whether to confirm before sending. Must be
- one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
+ one of 'always', 'never', 'cc', 'compose', or 'auto'. See `--confirm`
in the previous section for the meaning of these values.
EXAMPLE
smtpUser = yourname@gmail.com
smtpServerPort = 587
+If you have multifactor authentication setup on your gmail account, you will
+need to generate an app-specific password for use with 'git send-email'. Visit
+https://security.google.com/settings/security/apppasswords to setup an
+app-specific password. Once setup, you can store it with the credentials
+helper:
+
+ $ git credential fill
+ protocol=smtp
+ host=smtp.gmail.com
+ username=youname@gmail.com
+ password=app-password
+
+
Once your commits are ready to be sent to the mailing list, run the
following commands: