Fix trivial typos and inconsistencies in hooks documentation

Pointed out by Alan Chandler.

Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>

diff --git a/Documentation/hooks.txt b/Documentation/hooks.txt
index 898b4aaf80aabe8caa9675c4371918a61312f1cb..517f49b5cc5016a20b171789b89f48cb6ef0ecd5 100644 (file)
--- a/Documentation/hooks.txt
+++ b/Documentation/hooks.txt
@@ -5,8 +5,7 @@ Hooks are little scripts you can place in `$GIT_DIR/hooks`
 directory to trigger action at certain points.  When
 `git-init-db` is run, a handful example hooks are copied in the
 `hooks` directory of the new repository, but by default they are
 directory to trigger action at certain points.  When
 `git-init-db` is run, a handful example hooks are copied in the
 `hooks` directory of the new repository, but by default they are

-all disabled.  To enable a hook, make it executable with `chmod
-+x`.
+all disabled.  To enable a hook, make it executable with `chmod +x`.

 
 This document describes the currently defined hooks.
 
 
 This document describes the currently defined hooks.
 


@@ -16,16 +15,16 @@ applypatch-msg
 This hook is invoked by `git-applypatch` script, which is
 typically invoked by `git-applymbox`.  It takes a single
 parameter, the name of the file that holds the proposed commit
 This hook is invoked by `git-applypatch` script, which is
 typically invoked by `git-applymbox`.  It takes a single
 parameter, the name of the file that holds the proposed commit

-log message.  Exiting with non-zero status causes the
-'git-applypatch' to abort before applying the patch.
+log message.  Exiting with non-zero status causes
+`git-applypatch` to abort before applying the patch.

 
 The hook is allowed to edit the message file in place, and can
 be used to normalize the message into some project standard
 format (if the project has one). It can also be used to refuse
 the commit after inspecting the message file.
 
 
 The hook is allowed to edit the message file in place, and can
 be used to normalize the message into some project standard
 format (if the project has one). It can also be used to refuse
 the commit after inspecting the message file.
 

-The default applypatch-msg hook, when enabled, runs the
-commit-msg hook, if the latter is enabled.
+The default 'applypatch-msg' hook, when enabled, runs the
+'commit-msg' hook, if the latter is enabled.

 
 pre-applypatch
 --------------
 
 pre-applypatch
 --------------


@@ -39,8 +38,8 @@ after application of the patch not committed.
 It can be used to inspect the current working tree and refuse to
 make a commit if it does not pass certain test.
 
 It can be used to inspect the current working tree and refuse to
 make a commit if it does not pass certain test.
 

-The default pre-applypatch hook, when enabled, runs the
-pre-commit hook, if the latter is enabled.
+The default 'pre-applypatch' hook, when enabled, runs the
+'pre-commit' hook, if the latter is enabled.

 
 post-applypatch
 ---------------
 
 post-applypatch
 ---------------


@@ -61,9 +60,9 @@ invoked before obtaining the proposed commit log message and
 making a commit.  Exiting with non-zero status from this script
 causes the `git-commit` to abort.
 
 making a commit.  Exiting with non-zero status from this script
 causes the `git-commit` to abort.
 

-The default pre-commit hook, when enabled, catches introduction
+The default 'pre-commit' hook, when enabled, catches introduction

 of lines with trailing whitespaces and aborts the commit when
 of lines with trailing whitespaces and aborts the commit when

-a such line is found.
+such a line is found.

 
 commit-msg
 ----------
 
 commit-msg
 ----------


@@ -79,8 +78,8 @@ be used to normalize the message into some project standard
 format (if the project has one). It can also be used to refuse
 the commit after inspecting the message file.
 
 format (if the project has one). It can also be used to refuse
 the commit after inspecting the message file.
 

-The default commit-msg hook, when enabled, detects duplicate
-Signed-off-by: lines, and aborts the commit when one is found.
+The default 'commit-msg' hook, when enabled, detects duplicate
+"Signed-off-by" lines, and aborts the commit if one is found.

 
 post-commit
 -----------
 
 post-commit
 -----------


@@ -91,23 +90,24 @@ parameter, and is invoked after a commit is made.
 This hook is meant primarily for notification, and cannot affect
 the outcome of `git-commit`.
 
 This hook is meant primarily for notification, and cannot affect
 the outcome of `git-commit`.
 

-The default post-commit hook, when enabled, demonstrates how to
+The default 'post-commit' hook, when enabled, demonstrates how to

 send out a commit notification e-mail.
 
 update
 ------
 
 This hook is invoked by `git-receive-pack` on the remote repository,
 send out a commit notification e-mail.
 
 update
 ------
 
 This hook is invoked by `git-receive-pack` on the remote repository,

-which is happens when a `git push` is done on a local repository.
+which happens when a `git push` is done on a local repository.

 Just before updating the ref on the remote repository, the update hook
 is invoked.  Its exit status determines the success or failure of
 the ref update.
 
 The hook executes once for each ref to be updated, and takes
 three parameters:
 Just before updating the ref on the remote repository, the update hook
 is invoked.  Its exit status determines the success or failure of
 the ref update.
 
 The hook executes once for each ref to be updated, and takes
 three parameters:

-    - the name of the ref being updated,
-    - the old object name stored in the ref,
-    - and the new objectname to be stored in the ref.
+
+ - the name of the ref being updated,
+ - the old object name stored in the ref,
+ - and the new objectname to be stored in the ref.

 
 A zero exit from the update hook allows the ref to be updated.
 Exiting with a non-zero status prevents `git-receive-pack`
 
 A zero exit from the update hook allows the ref to be updated.
 Exiting with a non-zero status prevents `git-receive-pack`


@@ -126,16 +126,16 @@ Another use suggested on the mailing list is to use this hook to
 implement access control which is finer grained than the one
 based on filesystem group.
 
 implement access control which is finer grained than the one
 based on filesystem group.
 

-The standard output of this hook is sent to /dev/null; if you
-want to report something to the git-send-pack on the other end,
-you can redirect your output to your stderr.
+The standard output of this hook is sent to `/dev/null`; if you
+want to report something to the `git-send-pack` on the other end,
+you can redirect your output to your `stderr`.

 
 
 post-update
 -----------
 
 This hook is invoked by `git-receive-pack` on the remote repository,
 
 
 post-update
 -----------
 
 This hook is invoked by `git-receive-pack` on the remote repository,

-which is happens when a `git push` is done on a local repository.
+which happens when a `git push` is done on a local repository.

 It executes on the remote repository once after all the refs have
 been updated.
 
 It executes on the remote repository once after all the refs have
 been updated.
 


@@ -145,16 +145,16 @@ name of ref that was actually updated.
 This hook is meant primarily for notification, and cannot affect
 the outcome of `git-receive-pack`.
 
 This hook is meant primarily for notification, and cannot affect
 the outcome of `git-receive-pack`.
 

-The post-update hook can tell what are the heads that were pushed,
+The 'post-update' hook can tell what are the heads that were pushed,

 but it does not know what their original and updated values are,
 so it is a poor place to do log old..new.
 
 but it does not know what their original and updated values are,
 so it is a poor place to do log old..new.
 

-The default post-update hook, when enabled, runs
+When enabled, the default 'post-update' hook runs

 `git-update-server-info` to keep the information used by dumb
 `git-update-server-info` to keep the information used by dumb

-transports (e.g., http) up-to-date.  If you are publishing
-a git repository that is accessible via http, you should
+transports (e.g., HTTP) up-to-date.  If you are publishing
+a git repository that is accessible via HTTP, you should

 probably enable this hook.
 
 probably enable this hook.
 

-The standard output of this hook is sent to /dev/null; if you
-want to report something to the git-send-pack on the other end,
-you can redirect your output to your stderr.
+The standard output of this hook is sent to `/dev/null`; if you
+want to report something to the `git-send-pack` on the other end,
+you can redirect your output to your `stderr`.