doc: change configuration variables format

This change configuration variables that where in italic style
to monospace font according to the guideline. It was obtained with

grep '[[:alpha:]]*\.[[:alpha:]]*::$' config.txt | \
sed -e 's/::$//' -e 's/\./\\\\./' | \
xargs -iP perl -pi -e "s/\'P\'/\`P\`/g" ./*.txt

Signed-off-by: Tom Russello <tom.russello@grenoble-inp.org>
Signed-off-by: Erwan Mathoniere <erwan.mathoniere@grenoble-inp.org>
Signed-off-by: Samuel Groot <samuel.groot@grenoble-inp.org>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --git a/Documentation/config.txt b/Documentation/config.txt
index 56f51ae88327669b6f3661d5c366d03745c0afdd..ef77f03a8b55a519a5f592a9cdf15eac42a11f16 100644 (file)
--- a/Documentation/config.txt
+++ b/Documentation/config.txt
@@ -545,7 +545,7 @@ core.compression::
        -1 is the zlib default. 0 means no compression,
        and 1..9 are various speed/size tradeoffs, 9 being slowest.
        If set, this provides a default to other compression variables,
        -1 is the zlib default. 0 means no compression,
        and 1..9 are various speed/size tradeoffs, 9 being slowest.
        If set, this provides a default to other compression variables,

-       such as 'core.looseCompression' and 'pack.compression'.
+       such as `core.looseCompression` and `pack.compression`.

 
 core.looseCompression::
        An integer -1..9, indicating the compression level for objects that
 
 core.looseCompression::
        An integer -1..9, indicating the compression level for objects that


@@ -1400,18 +1400,18 @@ gitcvs.usecrlfattr::
        treat it as text. If they suppress text conversion, the file
        will be set with '-kb' mode, which suppresses any newline munging
        the client might otherwise do. If the attributes do not allow
        treat it as text. If they suppress text conversion, the file
        will be set with '-kb' mode, which suppresses any newline munging
        the client might otherwise do. If the attributes do not allow

-       the file type to be determined, then 'gitcvs.allBinary' is
+       the file type to be determined, then `gitcvs.allBinary` is

        used. See linkgit:gitattributes[5].
 
 gitcvs.allBinary::
        used. See linkgit:gitattributes[5].
 
 gitcvs.allBinary::

-       This is used if 'gitcvs.usecrlfattr' does not resolve
+       This is used if `gitcvs.usecrlfattr` does not resolve

        the correct '-kb' mode to use. If true, all
        unresolved files are sent to the client in
        mode '-kb'. This causes the client to treat them
        as binary files, which suppresses any newline munging it
        otherwise might do. Alternatively, if it is set to "guess",
        then the contents of the file are examined to decide if
        the correct '-kb' mode to use. If true, all
        unresolved files are sent to the client in
        mode '-kb'. This causes the client to treat them
        as binary files, which suppresses any newline munging it
        otherwise might do. Alternatively, if it is set to "guess",
        then the contents of the file are examined to decide if

-       it is binary, similar to 'core.autocrlf'.
+       it is binary, similar to `core.autocrlf`.

 
 gitcvs.dbName::
        Database used by git-cvsserver to cache revision information
 
 gitcvs.dbName::
        Database used by git-cvsserver to cache revision information


@@ -1430,7 +1430,7 @@ gitcvs.dbDriver::
        See linkgit:git-cvsserver[1].
 
 gitcvs.dbUser, gitcvs.dbPass::
        See linkgit:git-cvsserver[1].
 
 gitcvs.dbUser, gitcvs.dbPass::

-       Database user and password. Only useful if setting 'gitcvs.dbDriver',
+       Database user and password. Only useful if setting `gitcvs.dbDriver`,

        since SQLite has no concept of database users and/or passwords.
        'gitcvs.dbUser' supports variable substitution (see
        linkgit:git-cvsserver[1] for details).
        since SQLite has no concept of database users and/or passwords.
        'gitcvs.dbUser' supports variable substitution (see
        linkgit:git-cvsserver[1] for details).


@@ -1442,8 +1442,8 @@ gitcvs.dbTableNamePrefix::
        linkgit:git-cvsserver[1] for details).  Any non-alphabetic
        characters will be replaced with underscores.
 
        linkgit:git-cvsserver[1] for details).  Any non-alphabetic
        characters will be replaced with underscores.
 

-All gitcvs variables except for 'gitcvs.usecrlfattr' and
-'gitcvs.allBinary' can also be specified as
+All gitcvs variables except for `gitcvs.usecrlfattr` and
+`gitcvs.allBinary` can also be specified as

 'gitcvs.<access_method>.<varname>' (where 'access_method'
 is one of "ext" and "pserver") to make them apply only for the given
 access method.
 'gitcvs.<access_method>.<varname>' (where 'access_method'
 is one of "ext" and "pserver") to make them apply only for the given
 access method.


@@ -1476,7 +1476,7 @@ grep.patternType::
 
 grep.extendedRegexp::
        If set to true, enable '--extended-regexp' option by default. This
 
 grep.extendedRegexp::
        If set to true, enable '--extended-regexp' option by default. This

-       option is ignored when the 'grep.patternType' option is set to a value
+       option is ignored when the `grep.patternType` option is set to a value

        other than 'default'.
 
 grep.threads::
        other than 'default'.
 
 grep.threads::


@@ -2587,7 +2587,7 @@ sendemail.identity::
        A configuration identity. When given, causes values in the
        'sendemail.<identity>' subsection to take precedence over
        values in the 'sendemail' section. The default identity is
        A configuration identity. When given, causes values in the
        'sendemail.<identity>' subsection to take precedence over
        values in the 'sendemail' section. The default identity is

-       the value of 'sendemail.identity'.
+       the value of `sendemail.identity`.

 
 sendemail.smtpEncryption::
        See linkgit:git-send-email[1] for description.  Note that this
 
 sendemail.smtpEncryption::
        See linkgit:git-send-email[1] for description.  Note that this


@@ -2604,7 +2604,7 @@ sendemail.<identity>.*::
        Identity-specific versions of the 'sendemail.*' parameters
        found below, taking precedence over those when the this
        identity is selected, through command-line or
        Identity-specific versions of the 'sendemail.*' parameters
        found below, taking precedence over those when the this
        identity is selected, through command-line or

-       'sendemail.identity'.
+       `sendemail.identity`.

 
 sendemail.aliasesFile::
 sendemail.aliasFileType::
 
 sendemail.aliasesFile::
 sendemail.aliasFileType::


@@ -2634,7 +2634,7 @@ sendemail.xmailer::
        See linkgit:git-send-email[1] for description.
 
 sendemail.signedoffcc (deprecated)::
        See linkgit:git-send-email[1] for description.
 
 sendemail.signedoffcc (deprecated)::

-       Deprecated alias for 'sendemail.signedoffbycc'.
+       Deprecated alias for `sendemail.signedoffbycc`.

 
 showbranch.default::
        The default set of branches for linkgit:git-show-branch[1].
 
 showbranch.default::
        The default set of branches for linkgit:git-show-branch[1].


@@ -2864,8 +2864,8 @@ user.name::
        environment variables.  See linkgit:git-commit-tree[1].
 
 user.useConfigOnly::
        environment variables.  See linkgit:git-commit-tree[1].
 
 user.useConfigOnly::

-       Instruct Git to avoid trying to guess defaults for 'user.email'
-       and 'user.name', and instead retrieve the values only from the
+       Instruct Git to avoid trying to guess defaults for `user.email`
+       and `user.name`, and instead retrieve the values only from the

        configuration. For example, if you have multiple email addresses
        and would like to use a different one for each repository, then
        with this configuration option set to `true` in the global config
        configuration. For example, if you have multiple email addresses
        and would like to use a different one for each repository, then
        with this configuration option set to `true` in the global config

diff --git a/Documentation/diff-config.txt b/Documentation/diff-config.txt
index 6eaa45271c9ff2d1200e4299c3040d52952a2ec4..7513795479a4080e007182b521773b53acb1d081 100644 (file)
--- a/Documentation/diff-config.txt
+++ b/Documentation/diff-config.txt
@@ -75,7 +75,7 @@ diff.ignoreSubmodules::
        commands such as 'git diff-files'. 'git checkout' also honors
        this setting when reporting uncommitted changes. Setting it to
        'all' disables the submodule summary normally shown by 'git commit'
        commands such as 'git diff-files'. 'git checkout' also honors
        this setting when reporting uncommitted changes. Setting it to
        'all' disables the submodule summary normally shown by 'git commit'

-       and 'git status' when 'status.submoduleSummary' is set unless it is
+       and 'git status' when `status.submoduleSummary` is set unless it is

        overridden by using the --ignore-submodules command-line option.
        The 'git submodule' commands are not affected by this setting.
 
        overridden by using the --ignore-submodules command-line option.
        The 'git submodule' commands are not affected by this setting.
 

diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt
index 3fd7ff1eefccd5fdc27fbfbc41183a513750b3f3..19ee2ddf8e83c22aab5b9a6772f1998a86ef2343 100644 (file)
--- a/Documentation/git-commit.txt
+++ b/Documentation/git-commit.txt
@@ -201,7 +201,7 @@ default::
        Otherwise `whitespace`.
 --
 +
        Otherwise `whitespace`.
 --
 +

-The default can be changed by the 'commit.cleanup' configuration
+The default can be changed by the `commit.cleanup` configuration

 variable (see linkgit:git-config[1]).
 
 -e::
 variable (see linkgit:git-config[1]).
 
 -e::

diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 6821441d7d7beedac1f5b322248c3012d23bb103..353f6351a01263d62b371a55518ac0adf8b16de1 100644 (file)
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -58,7 +58,7 @@ output, unless the `--stdout` option is specified.
 
 If `-o` is specified, output files are created in <dir>.  Otherwise
 they are created in the current working directory. The default path
 
 If `-o` is specified, output files are created in <dir>.  Otherwise
 they are created in the current working directory. The default path

-can be set with the 'format.outputDirectory' configuration option.
+can be set with the `format.outputDirectory` configuration option.

 The `-o` option takes precedence over `format.outputDirectory`.
 To store patches in the current working directory even when
 `format.outputDirectory` points elsewhere, use `-o .`.
 The `-o` option takes precedence over `format.outputDirectory`.
 To store patches in the current working directory even when
 `format.outputDirectory` points elsewhere, use `-o .`.


@@ -146,9 +146,9 @@ series, where the head is chosen from the cover letter, the
 `--in-reply-to`, and the first patch mail, in this order.  'deep'
 threading makes every mail a reply to the previous one.
 +
 `--in-reply-to`, and the first patch mail, in this order.  'deep'
 threading makes every mail a reply to the previous one.
 +

-The default is `--no-thread`, unless the 'format.thread' configuration
+The default is `--no-thread`, unless the `format.thread` configuration

 is set.  If `--thread` is specified without a style, it defaults to the
 is set.  If `--thread` is specified without a style, it defaults to the

-style specified by 'format.thread' if any, or else `shallow`.
+style specified by `format.thread` if any, or else `shallow`.

 +
 Beware that the default for 'git send-email' is to thread emails
 itself.  If you want `git format-patch` to take care of threading, you
 +
 Beware that the default for 'git send-email' is to thread emails
 itself.  If you want `git format-patch` to take care of threading, you

diff --git a/Documentation/git-gc.txt b/Documentation/git-gc.txt
index fa1510480a1d55236f2c467a0d4e901bbc60dc84..bed60f471cd5736b173a2c636717cd566c1e4511 100644 (file)
--- a/Documentation/git-gc.txt
+++ b/Documentation/git-gc.txt
@@ -82,13 +82,13 @@ automatic consolidation of packs.
 Configuration
 -------------
 
 Configuration
 -------------
 

-The optional configuration variable 'gc.reflogExpire' can be
+The optional configuration variable `gc.reflogExpire` can be

 set to indicate how long historical entries within each branch's
 reflog should remain available in this repository.  The setting is
 expressed as a length of time, for example '90 days' or '3 months'.
 It defaults to '90 days'.
 
 set to indicate how long historical entries within each branch's
 reflog should remain available in this repository.  The setting is
 expressed as a length of time, for example '90 days' or '3 months'.
 It defaults to '90 days'.
 

-The optional configuration variable 'gc.reflogExpireUnreachable'
+The optional configuration variable `gc.reflogExpireUnreachable`

 can be set to indicate how long historical reflog entries which
 are not part of the current branch should remain available in
 this repository.  These types of entries are generally created as
 can be set to indicate how long historical reflog entries which
 are not part of the current branch should remain available in
 this repository.  These types of entries are generally created as


@@ -107,30 +107,30 @@ branches:
        reflogExpireUnreachable = 3 days
 ------------
 
        reflogExpireUnreachable = 3 days
 ------------
 

-The optional configuration variable 'gc.rerereResolved' indicates
+The optional configuration variable `gc.rerereResolved` indicates

 how long records of conflicted merge you resolved earlier are
 kept.  This defaults to 60 days.
 
 how long records of conflicted merge you resolved earlier are
 kept.  This defaults to 60 days.
 

-The optional configuration variable 'gc.rerereUnresolved' indicates
+The optional configuration variable `gc.rerereUnresolved` indicates

 how long records of conflicted merge you have not resolved are
 kept.  This defaults to 15 days.
 
 how long records of conflicted merge you have not resolved are
 kept.  This defaults to 15 days.
 

-The optional configuration variable 'gc.packRefs' determines if
+The optional configuration variable `gc.packRefs` determines if

 'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable
 it within all non-bare repos or it can be set to a boolean value.
 This defaults to true.
 
 'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable
 it within all non-bare repos or it can be set to a boolean value.
 This defaults to true.
 

-The optional configuration variable 'gc.aggressiveWindow' controls how
+The optional configuration variable `gc.aggressiveWindow` controls how

 much time is spent optimizing the delta compression of the objects in
 the repository when the --aggressive option is specified.  The larger
 the value, the more time is spent optimizing the delta compression.  See
 the documentation for the --window' option in linkgit:git-repack[1] for
 more details.  This defaults to 250.
 
 much time is spent optimizing the delta compression of the objects in
 the repository when the --aggressive option is specified.  The larger
 the value, the more time is spent optimizing the delta compression.  See
 the documentation for the --window' option in linkgit:git-repack[1] for
 more details.  This defaults to 250.
 

-Similarly, the optional configuration variable 'gc.aggressiveDepth'
+Similarly, the optional configuration variable `gc.aggressiveDepth`

 controls --depth option in linkgit:git-repack[1]. This defaults to 250.
 
 controls --depth option in linkgit:git-repack[1]. This defaults to 250.
 

-The optional configuration variable 'gc.pruneExpire' controls how old
+The optional configuration variable `gc.pruneExpire` controls how old

 the unreferenced loose objects have to be before they are pruned.  The
 default is "2 weeks ago".
 
 the unreferenced loose objects have to be before they are pruned.  The
 default is "2 weeks ago".
 

diff --git a/Documentation/git-grep.txt b/Documentation/git-grep.txt
index cb0f6cf6782c87d7a5b08e2b75de5b4ecb2969f9..40cfe37d00d1b04995c7c486e7dad009278040b9 100644 (file)
--- a/Documentation/git-grep.txt
+++ b/Documentation/git-grep.txt
@@ -51,7 +51,7 @@ grep.patternType::
 
 grep.extendedRegexp::
        If set to true, enable '--extended-regexp' option by default. This
 
 grep.extendedRegexp::
        If set to true, enable '--extended-regexp' option by default. This

-       option is ignored when the 'grep.patternType' option is set to a value
+       option is ignored when the `grep.patternType` option is set to a value

        other than 'default'.
 
 grep.threads::
        other than 'default'.
 
 grep.threads::

diff --git a/Documentation/git-help.txt b/Documentation/git-help.txt
index 679d5397b365269af6975b70562129f13bb6b090..338b8d61ce01b49f14cfbe6eff79e998ae2a9ff7 100644 (file)
--- a/Documentation/git-help.txt
+++ b/Documentation/git-help.txt
@@ -57,10 +57,10 @@ OPTIONS
 --man::
        Display manual page for the command in the 'man' format. This
        option may be used to override a value set in the
 --man::
        Display manual page for the command in the 'man' format. This
        option may be used to override a value set in the

-       'help.format' configuration variable.
+       `help.format` configuration variable.

 +
 By default the 'man' program will be used to display the manual page,
 +
 By default the 'man' program will be used to display the manual page,

-but the 'man.viewer' configuration variable may be used to choose
+but the `man.viewer` configuration variable may be used to choose

 other display programs (see below).
 
 -w::
 other display programs (see below).
 
 -w::


@@ -69,7 +69,7 @@ other display programs (see below).
        format. A web browser will be used for that purpose.
 +
 The web browser can be specified using the configuration variable
        format. A web browser will be used for that purpose.
 +
 The web browser can be specified using the configuration variable

-'help.browser', or 'web.browser' if the former is not set. If none of
+`help.browser`, or `web.browser` if the former is not set. If none of

 these config variables is set, the 'git web{litdd}browse' helper script
 (called by 'git help') will pick a suitable default. See
 linkgit:git-web{litdd}browse[1] for more information about this.
 these config variables is set, the 'git web{litdd}browse' helper script
 (called by 'git help') will pick a suitable default. See
 linkgit:git-web{litdd}browse[1] for more information about this.


@@ -80,7 +80,7 @@ CONFIGURATION VARIABLES
 help.format
 ~~~~~~~~~~~
 
 help.format
 ~~~~~~~~~~~
 

-If no command-line option is passed, the 'help.format' configuration
+If no command-line option is passed, the `help.format` configuration

 variable will be checked. The following values are supported for this
 variable; they make 'git help' behave as their corresponding command-
 line option:
 variable will be checked. The following values are supported for this
 variable; they make 'git help' behave as their corresponding command-
 line option:


@@ -92,7 +92,7 @@ line option:
 help.browser, web.browser and browser.<tool>.path
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 help.browser, web.browser and browser.<tool>.path
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

-The 'help.browser', 'web.browser' and 'browser.<tool>.path' will also
+The `help.browser`, `web.browser` and `browser.<tool>.path` will also

 be checked if the 'web' format is chosen (either by command-line
 option or configuration variable). See '-w|--web' in the OPTIONS
 section above and linkgit:git-web{litdd}browse[1].
 be checked if the 'web' format is chosen (either by command-line
 option or configuration variable). See '-w|--web' in the OPTIONS
 section above and linkgit:git-web{litdd}browse[1].


@@ -100,7 +100,7 @@ section above and linkgit:git-web{litdd}browse[1].
 man.viewer
 ~~~~~~~~~~
 
 man.viewer
 ~~~~~~~~~~
 

-The 'man.viewer' configuration variable will be checked if the 'man'
+The `man.viewer` configuration variable will be checked if the 'man'

 format is chosen. The following values are currently supported:
 
 * "man": use the 'man' program as usual,
 format is chosen. The following values are currently supported:
 
 * "man": use the 'man' program as usual,


@@ -110,9 +110,9 @@ format is chosen. The following values are currently supported:
 tab (see 'Note about konqueror' below).
 
 Values for other tools can be used if there is a corresponding
 tab (see 'Note about konqueror' below).
 
 Values for other tools can be used if there is a corresponding

-'man.<tool>.cmd' configuration entry (see below).
+`man.<tool>.cmd` configuration entry (see below).

 
 

-Multiple values may be given to the 'man.viewer' configuration
+Multiple values may be given to the `man.viewer` configuration

 variable. Their corresponding programs will be tried in the order
 listed in the configuration file.
 
 variable. Their corresponding programs will be tried in the order
 listed in the configuration file.
 


@@ -135,7 +135,7 @@ man.<tool>.path
 ~~~~~~~~~~~~~~~
 
 You can explicitly provide a full path to your preferred man viewer by
 ~~~~~~~~~~~~~~~
 
 You can explicitly provide a full path to your preferred man viewer by

-setting the configuration variable 'man.<tool>.path'. For example, you
+setting the configuration variable `man.<tool>.path`. For example, you

 can configure the absolute path to konqueror by setting
 'man.konqueror.path'. Otherwise, 'git help' assumes the tool is
 available in PATH.
 can configure the absolute path to konqueror by setting
 'man.konqueror.path'. Otherwise, 'git help' assumes the tool is
 available in PATH.


@@ -143,9 +143,9 @@ available in PATH.
 man.<tool>.cmd
 ~~~~~~~~~~~~~~
 
 man.<tool>.cmd
 ~~~~~~~~~~~~~~
 

-When the man viewer, specified by the 'man.viewer' configuration
+When the man viewer, specified by the `man.viewer` configuration

 variables, is not among the supported ones, then the corresponding
 variables, is not among the supported ones, then the corresponding

-'man.<tool>.cmd' configuration variable will be looked up. If this
+`man.<tool>.cmd` configuration variable will be looked up. If this

 variable exists then the specified tool will be treated as a custom
 command and a shell eval will be used to run the command with the man
 page passed as arguments.
 variable exists then the specified tool will be treated as a custom
 command and a shell eval will be used to run the command with the man
 page passed as arguments.


@@ -153,7 +153,7 @@ page passed as arguments.
 Note about konqueror
 ~~~~~~~~~~~~~~~~~~~~
 
 Note about konqueror
 ~~~~~~~~~~~~~~~~~~~~
 

-When 'konqueror' is specified in the 'man.viewer' configuration
+When 'konqueror' is specified in the `man.viewer` configuration

 variable, we launch 'kfmclient' to try to open the man page on an
 already opened konqueror in a new tab if possible.
 
 variable, we launch 'kfmclient' to try to open the man page on an
 already opened konqueror in a new tab if possible.
 

diff --git a/Documentation/git-instaweb.txt b/Documentation/git-instaweb.txt
index cc75b2502288f74a6503b22d6a9abfdd799f97d3..e8ecdbf927ba5e7af79d3852a9a939c10052e45f 100644 (file)
--- a/Documentation/git-instaweb.txt
+++ b/Documentation/git-instaweb.txt
@@ -80,8 +80,8 @@ You may specify configuration in your .git/config
 
 -----------------------------------------------------------------------
 
 
 -----------------------------------------------------------------------
 

-If the configuration variable 'instaweb.browser' is not set,
-'web.browser' will be used instead if it is defined. See
+If the configuration variable `instaweb.browser` is not set,
+`web.browser` will be used instead if it is defined. See

 linkgit:git-web{litdd}browse[1] for more information about this.
 
 SEE ALSO
 linkgit:git-web{litdd}browse[1] for more information about this.
 
 SEE ALSO

diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt
index cf6ee4a4df5f91f585591c314854ed1a332d8909..19f46b64d3d5bbff439f43ebc93fbc094b9a87ee 100644 (file)
--- a/Documentation/git-push.txt
+++ b/Documentation/git-push.txt
@@ -137,8 +137,8 @@ already exists on the remote side.
        and also push annotated tags in `refs/tags` that are missing
        from the remote but are pointing at commit-ish that are
        reachable from the refs being pushed.  This can also be specified
        and also push annotated tags in `refs/tags` that are missing
        from the remote but are pointing at commit-ish that are
        reachable from the refs being pushed.  This can also be specified

-       with configuration variable 'push.followTags'.  For more
-       information, see 'push.followTags' in linkgit:git-config[1].
+       with configuration variable `push.followTags`.  For more
+       information, see `push.followTags` in linkgit:git-config[1].

 
 --[no-]signed::
 --sign=(true|false|if-asked)::
 
 --[no-]signed::
 --sign=(true|false|if-asked)::


@@ -240,7 +240,7 @@ origin +master` to force a push to the `master` branch). See the
        For every branch that is up to date or successfully pushed, add
        upstream (tracking) reference, used by argument-less
        linkgit:git-pull[1] and other commands. For more information,
        For every branch that is up to date or successfully pushed, add
        upstream (tracking) reference, used by argument-less
        linkgit:git-pull[1] and other commands. For more information,

-       see 'branch.<name>.merge' in linkgit:git-config[1].
+       see `branch.<name>.merge` in linkgit:git-config[1].

 
 --[no-]thin::
        These options are passed to linkgit:git-send-pack[1]. A thin transfer
 
 --[no-]thin::
        These options are passed to linkgit:git-send-pack[1]. A thin transfer

diff --git a/Documentation/git-send-email.txt b/Documentation/git-send-email.txt
index 771a7b5b09157cc1ac19d1f998600f96f1f9a470..00bfc815b62f1593dc7121a81bd83ea76921ed42 100644 (file)
--- a/Documentation/git-send-email.txt
+++ b/Documentation/git-send-email.txt
@@ -47,18 +47,18 @@ Composing
 
 --annotate::
        Review and edit each patch you're about to send. Default is the value
 
 --annotate::
        Review and edit each patch you're about to send. Default is the value

-       of 'sendemail.annotate'. See the CONFIGURATION section for
-       'sendemail.multiEdit'.
+       of `sendemail.annotate`. See the CONFIGURATION section for
+       `sendemail.multiEdit`.

 
 --bcc=<address>,...::
        Specify a "Bcc:" value for each email. Default is the value of
 
 --bcc=<address>,...::
        Specify a "Bcc:" value for each email. Default is the value of

-       'sendemail.bcc'.
+       `sendemail.bcc`.

 +
 This option may be specified multiple times.
 
 --cc=<address>,...::
        Specify a starting "Cc:" value for each email.
 +
 This option may be specified multiple times.
 
 --cc=<address>,...::
        Specify a starting "Cc:" value for each email.

-       Default is the value of 'sendemail.cc'.
+       Default is the value of `sendemail.cc`.

 +
 This option may be specified multiple times.
 
 +
 This option may be specified multiple times.
 


@@ -74,12 +74,12 @@ and In-Reply-To headers will be used unless they are removed.
 +
 Missing From or In-Reply-To headers will be prompted for.
 +
 +
 Missing From or In-Reply-To headers will be prompted for.
 +

-See the CONFIGURATION section for 'sendemail.multiEdit'.
+See the CONFIGURATION section for `sendemail.multiEdit`.

 
 --from=<address>::
        Specify the sender of the emails.  If not specified on the command line,
 
 --from=<address>::
        Specify the sender of the emails.  If not specified on the command line,

-       the value of the 'sendemail.from' configuration option is used.  If
-       neither the command-line option nor 'sendemail.from' are set, then the
+       the value of the `sendemail.from` configuration option is used.  If
+       neither the command-line option nor `sendemail.from` are set, then the

        user will be prompted for the value.  The default for the prompt will be
        the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
        set, as returned by "git var -l".
        user will be prompted for the value.  The default for the prompt will be
        the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
        set, as returned by "git var -l".


@@ -114,7 +114,7 @@ is not set, this will be prompted for.
 --to=<address>,...::
        Specify the primary recipient of the emails generated. Generally, this
        will be the upstream maintainer of the project involved. Default is the
 --to=<address>,...::
        Specify the primary recipient of the emails generated. Generally, this
        will be the upstream maintainer of the project involved. Default is the

-       value of the 'sendemail.to' configuration value; if that is unspecified,
+       value of the `sendemail.to` configuration value; if that is unspecified,

        and --to-cmd is not specified, this will be prompted for.
 +
 This option may be specified multiple times.
        and --to-cmd is not specified, this will be prompted for.
 +
 This option may be specified multiple times.


@@ -138,7 +138,7 @@ Note that no attempts whatsoever are made to validate the encoding.
        can be useful when the repository contains files that contain carriage
        returns, but makes the raw patch email file (as saved from a MUA) much
        harder to inspect manually.  base64 is even more fool proof, but also
        can be useful when the repository contains files that contain carriage
        returns, but makes the raw patch email file (as saved from a MUA) much
        harder to inspect manually.  base64 is even more fool proof, but also

-       even more opaque.  Default is the value of the 'sendemail.transferEncoding'
+       even more opaque.  Default is the value of the `sendemail.transferEncoding`

        configuration value; if that is unspecified, git will use 8bit and not
        add a Content-Transfer-Encoding header.
 
        configuration value; if that is unspecified, git will use 8bit and not
        add a Content-Transfer-Encoding header.
 


@@ -157,20 +157,20 @@ Sending
        subscribed to a list. In order to use the 'From' address, set the
        value to "auto". If you use the sendmail binary, you must have
        suitable privileges for the -f parameter.  Default is the value of the
        subscribed to a list. In order to use the 'From' address, set the
        value to "auto". If you use the sendmail binary, you must have
        suitable privileges for the -f parameter.  Default is the value of the

-       'sendemail.envelopeSender' configuration variable; if that is
+       `sendemail.envelopeSender` configuration variable; if that is

        unspecified, choosing the envelope sender is left to your MTA.
 
 --smtp-encryption=<encryption>::
        Specify the encryption to use, either 'ssl' or 'tls'.  Any other
        value reverts to plain SMTP.  Default is the value of
        unspecified, choosing the envelope sender is left to your MTA.
 
 --smtp-encryption=<encryption>::
        Specify the encryption to use, either 'ssl' or 'tls'.  Any other
        value reverts to plain SMTP.  Default is the value of

-       'sendemail.smtpEncryption'.
+       `sendemail.smtpEncryption`.

 
 --smtp-domain=<FQDN>::
        Specifies the Fully Qualified Domain Name (FQDN) used in the
        HELO/EHLO command to the SMTP server.  Some servers require the
        FQDN to match your IP address.  If not set, git send-email attempts
        to determine your FQDN automatically.  Default is the value of
 
 --smtp-domain=<FQDN>::
        Specifies the Fully Qualified Domain Name (FQDN) used in the
        HELO/EHLO command to the SMTP server.  Some servers require the
        FQDN to match your IP address.  If not set, git send-email attempts
        to determine your FQDN automatically.  Default is the value of

-       'sendemail.smtpDomain'.
+       `sendemail.smtpDomain`.

 
 --smtp-auth=<mechanisms>::
        Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting
 
 --smtp-auth=<mechanisms>::
        Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting


@@ -188,13 +188,13 @@ is specified, all mechanisms supported by the SASL library can be used.
 --smtp-pass[=<password>]::
        Password for SMTP-AUTH. The argument is optional: If no
        argument is specified, then the empty string is used as
 --smtp-pass[=<password>]::
        Password for SMTP-AUTH. The argument is optional: If no
        argument is specified, then the empty string is used as

-       the password. Default is the value of 'sendemail.smtpPass',
+       the password. Default is the value of `sendemail.smtpPass`,

        however '--smtp-pass' always overrides this value.
 +
 Furthermore, passwords need not be specified in configuration files
 or on the command line. If a username has been specified (with
        however '--smtp-pass' always overrides this value.
 +
 Furthermore, passwords need not be specified in configuration files
 or on the command line. If a username has been specified (with

-'--smtp-user' or a 'sendemail.smtpUser'), but no password has been
-specified (with '--smtp-pass' or 'sendemail.smtpPass'), then
+'--smtp-user' or a `sendemail.smtpUser`), but no password has been
+specified (with '--smtp-pass' or `sendemail.smtpPass`), then

 a password is obtained using 'git-credential'.
 
 --smtp-server=<host>::
 a password is obtained using 'git-credential'.
 
 --smtp-server=<host>::


@@ -202,7 +202,7 @@ a password is obtained using 'git-credential'.
        `smtp.example.com` or a raw IP address).  Alternatively it can
        specify a full pathname of a sendmail-like program instead;
        the program must support the `-i` option.  Default value can
        `smtp.example.com` or a raw IP address).  Alternatively it can
        specify a full pathname of a sendmail-like program instead;
        the program must support the `-i` option.  Default value can

-       be specified by the 'sendemail.smtpServer' configuration
+       be specified by the `sendemail.smtpServer` configuration

        option; the built-in default is `/usr/sbin/sendmail` or
        `/usr/lib/sendmail` if such program is available, or
        `localhost` otherwise.
        option; the built-in default is `/usr/sbin/sendmail` or
        `/usr/lib/sendmail` if such program is available, or
        `localhost` otherwise.


@@ -213,11 +213,11 @@ a password is obtained using 'git-credential'.
        submission port 587, or the common SSL smtp port 465);
        symbolic port names (e.g. "submission" instead of 587)
        are also accepted. The port can also be set with the
        submission port 587, or the common SSL smtp port 465);
        symbolic port names (e.g. "submission" instead of 587)
        are also accepted. The port can also be set with the

-       'sendemail.smtpServerPort' configuration variable.
+       `sendemail.smtpServerPort` configuration variable.

 
 --smtp-server-option=<option>::
        If set, specifies the outgoing SMTP server option to use.
 
 --smtp-server-option=<option>::
        If set, specifies the outgoing SMTP server option to use.

-       Default value can be specified by the 'sendemail.smtpServerOption'
+       Default value can be specified by the `sendemail.smtpServerOption`

        configuration option.
 +
 The --smtp-server-option option must be repeated for each option you want
        configuration option.
 +
 The --smtp-server-option option must be repeated for each option you want


@@ -234,13 +234,13 @@ must be used for each option.
        certificates concatenated together: see verify(1) -CAfile and
        -CApath for more information on these). Set it to an empty string
        to disable certificate verification. Defaults to the value of the
        certificates concatenated together: see verify(1) -CAfile and
        -CApath for more information on these). Set it to an empty string
        to disable certificate verification. Defaults to the value of the

-       'sendemail.smtpsslcertpath' configuration variable, if set, or the
+       `sendemail.smtpsslcertpath` configuration variable, if set, or the

        backing SSL library's compiled-in default otherwise (which should
        be the best choice on most platforms).
 
 --smtp-user=<user>::
        backing SSL library's compiled-in default otherwise (which should
        be the best choice on most platforms).
 
 --smtp-user=<user>::

-       Username for SMTP-AUTH. Default is the value of 'sendemail.smtpUser';
-       if a username is not specified (with '--smtp-user' or 'sendemail.smtpUser'),
+       Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`;
+       if a username is not specified (with '--smtp-user' or `sendemail.smtpUser`),

        then authentication is not attempted.
 
 --smtp-debug=0|1::
        then authentication is not attempted.
 
 --smtp-debug=0|1::


@@ -261,25 +261,25 @@ Automating
        Specify a command to execute once per patch file which
        should generate patch file specific "Cc:" entries.
        Output of this command must be single email address per line.
        Specify a command to execute once per patch file which
        should generate patch file specific "Cc:" entries.
        Output of this command must be single email address per line.

-       Default is the value of 'sendemail.ccCmd' configuration value.
+       Default is the value of `sendemail.ccCmd` configuration value.

 
 --[no-]chain-reply-to::
        If this is set, each email will be sent as a reply to the previous
        email sent.  If disabled with "--no-chain-reply-to", all emails after
        the first will be sent as replies to the first email sent.  When using
        this, it is recommended that the first file given be an overview of the
 
 --[no-]chain-reply-to::
        If this is set, each email will be sent as a reply to the previous
        email sent.  If disabled with "--no-chain-reply-to", all emails after
        the first will be sent as replies to the first email sent.  When using
        this, it is recommended that the first file given be an overview of the

-       entire patch series. Disabled by default, but the 'sendemail.chainReplyTo'
+       entire patch series. Disabled by default, but the `sendemail.chainReplyTo`

        configuration variable can be used to enable it.
 
 --identity=<identity>::
        A configuration identity. When given, causes values in the
        'sendemail.<identity>' subsection to take precedence over
        values in the 'sendemail' section. The default identity is
        configuration variable can be used to enable it.
 
 --identity=<identity>::
        A configuration identity. When given, causes values in the
        'sendemail.<identity>' subsection to take precedence over
        values in the 'sendemail' section. The default identity is

-       the value of 'sendemail.identity'.
+       the value of `sendemail.identity`.

 
 --[no-]signed-off-by-cc::
        If this is set, add emails found in Signed-off-by: or Cc: lines to the
 
 --[no-]signed-off-by-cc::
        If this is set, add emails found in Signed-off-by: or Cc: lines to the

-       cc list. Default is the value of 'sendemail.signedoffbycc' configuration
+       cc list. Default is the value of `sendemail.signedoffbycc` configuration

        value; if that is unspecified, default to --signed-off-by-cc.
 
 --[no-]cc-cover::
        value; if that is unspecified, default to --signed-off-by-cc.
 
 --[no-]cc-cover::


@@ -312,13 +312,13 @@ Automating
 - 'all' will suppress all auto cc values.
 --
 +
 - 'all' will suppress all auto cc values.
 --
 +

-Default is the value of 'sendemail.suppresscc' configuration value; if
+Default is the value of `sendemail.suppresscc` configuration value; if

 that is unspecified, default to 'self' if --suppress-from is
 specified, as well as 'body' if --no-signed-off-cc is specified.
 
 --[no-]suppress-from::
        If this is set, do not add the From: address to the cc: list.
 that is unspecified, default to 'self' if --suppress-from is
 specified, as well as 'body' if --no-signed-off-cc is specified.
 
 --[no-]suppress-from::
        If this is set, do not add the From: address to the cc: list.

-       Default is the value of 'sendemail.suppressFrom' configuration
+       Default is the value of `sendemail.suppressFrom` configuration

        value; if that is unspecified, default to --no-suppress-from.
 
 --[no-]thread::
        value; if that is unspecified, default to --no-suppress-from.
 
 --[no-]thread::


@@ -330,7 +330,7 @@ specified, as well as 'body' if --no-signed-off-cc is specified.
 +
 If disabled with "--no-thread", those headers will not be added
 (unless specified with --in-reply-to).  Default is the value of the
 +
 If disabled with "--no-thread", those headers will not be added
 (unless specified with --in-reply-to).  Default is the value of the

-'sendemail.thread' configuration value; if that is unspecified,
+`sendemail.thread` configuration value; if that is unspecified,

 default to --thread.
 +
 It is up to the user to ensure that no In-Reply-To header already
 default to --thread.
 +
 It is up to the user to ensure that no In-Reply-To header already


@@ -355,7 +355,7 @@ Administering
 - 'auto' is equivalent to 'cc' + 'compose'
 --
 +
 - 'auto' is equivalent to 'cc' + 'compose'
 --
 +

-Default is the value of 'sendemail.confirm' configuration value; if that
+Default is the value of `sendemail.confirm` configuration value; if that

 is unspecified, default to 'auto' unless any of the suppress options
 have been specified, in which case default to 'compose'.
 
 is unspecified, default to 'auto' unless any of the suppress options
 have been specified, in which case default to 'compose'.
 


@@ -381,7 +381,7 @@ have been specified, in which case default to 'compose'.
                        is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.
 --
 +
                        is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt.
 --
 +

-Default is the value of 'sendemail.validate'; if this is not set,
+Default is the value of `sendemail.validate`; if this is not set,

 default to '--validate'.
 
 --force::
 default to '--validate'.
 
 --force::


@@ -403,7 +403,7 @@ CONFIGURATION
 
 sendemail.aliasesFile::
        To avoid typing long email addresses, point this to one or more
 
 sendemail.aliasesFile::
        To avoid typing long email addresses, point this to one or more

-       email aliases files.  You must also supply 'sendemail.aliasFileType'.
+       email aliases files.  You must also supply `sendemail.aliasFileType`.

 
 sendemail.aliasFileType::
        Format of the file(s) specified in sendemail.aliasesFile. Must be
 
 sendemail.aliasFileType::
        Format of the file(s) specified in sendemail.aliasesFile. Must be

diff --git a/Documentation/git-svn.txt b/Documentation/git-svn.txt
index fb23a98a17df5eae1811d8b674ebcfd56122196a..90a70799e2a81296d6a0dcdc632a19bf143c83bf 100644 (file)
--- a/Documentation/git-svn.txt
+++ b/Documentation/git-svn.txt
@@ -748,7 +748,7 @@ svn-remote.<name>.rewriteUUID::
 
 svn-remote.<name>.pushurl::
 
 
 svn-remote.<name>.pushurl::
 

-       Similar to Git's 'remote.<name>.pushurl', this key is designed
+       Similar to Git's `remote.<name>.pushurl`, this key is designed

        to be used in cases where 'url' points to an SVN repository
        via a read-only transport, to provide an alternate read/write
        transport. It is assumed that both keys point to the same
        to be used in cases where 'url' points to an SVN repository
        via a read-only transport, to provide an alternate read/write
        transport. It is assumed that both keys point to the same

diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt
index abab4814ec984db62dff6b493c3eb93398a36afa..4b1c1b8e5ca0be18e5571c6e967a0723e7631397 100644 (file)
--- a/Documentation/git-tag.txt
+++ b/Documentation/git-tag.txt
@@ -104,7 +104,7 @@ OPTIONS
        order can also be affected by the
        "versionsort.prereleaseSuffix" configuration variable.
        The keys supported are the same as those in `git for-each-ref`.
        order can also be affected by the
        "versionsort.prereleaseSuffix" configuration variable.
        The keys supported are the same as those in `git for-each-ref`.

-       Sort order defaults to the value configured for the 'tag.sort'
+       Sort order defaults to the value configured for the `tag.sort`

        variable if it exists, or lexicographic order otherwise. See
        linkgit:git-config[1].
 
        variable if it exists, or lexicographic order otherwise. See
        linkgit:git-config[1].
 

diff --git a/Documentation/git-web--browse.txt b/Documentation/git-web--browse.txt
index 16ede5b4c36d3a231d6af3849f7eeb8f404daf98..7daa28fd94ba4500014f17447e5b59a8b7e8fa45 100644 (file)
--- a/Documentation/git-web--browse.txt
+++ b/Documentation/git-web--browse.txt
@@ -62,14 +62,14 @@ CONF.VAR (from -c option) and web.browser
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The web browser can be specified using a configuration variable passed
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The web browser can be specified using a configuration variable passed

-with the -c (or --config) command-line option, or the 'web.browser'
+with the -c (or --config) command-line option, or the `web.browser`

 configuration variable if the former is not used.
 
 browser.<tool>.path
 ~~~~~~~~~~~~~~~~~~~
 
 You can explicitly provide a full path to your preferred browser by
 configuration variable if the former is not used.
 
 browser.<tool>.path
 ~~~~~~~~~~~~~~~~~~~
 
 You can explicitly provide a full path to your preferred browser by

-setting the configuration variable 'browser.<tool>.path'. For example,
+setting the configuration variable `browser.<tool>.path`. For example,

 you can configure the absolute path to firefox by setting
 'browser.firefox.path'. Otherwise, 'git web{litdd}browse' assumes the tool
 is available in PATH.
 you can configure the absolute path to firefox by setting
 'browser.firefox.path'. Otherwise, 'git web{litdd}browse' assumes the tool
 is available in PATH.


@@ -79,7 +79,7 @@ browser.<tool>.cmd
 
 When the browser, specified by options or configuration variables, is
 not among the supported ones, then the corresponding
 
 When the browser, specified by options or configuration variables, is
 not among the supported ones, then the corresponding

-'browser.<tool>.cmd' configuration variable will be looked up. If this
+`browser.<tool>.cmd` configuration variable will be looked up. If this

 variable exists then 'git web{litdd}browse' will treat the specified tool
 as a custom command and will use a shell eval to run the command with
 the URLs passed as arguments.
 variable exists then 'git web{litdd}browse' will treat the specified tool
 as a custom command and will use a shell eval to run the command with
 the URLs passed as arguments.

diff --git a/Documentation/git.txt b/Documentation/git.txt
index cd213a7e3b36c6245668cb7a3ba0a458336e9fb0..25ef006c3204ab08ffb4f5c5ad71317bb58b2548 100644 (file)
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -991,7 +991,7 @@ for further details.
        If this environment variable is set, then Git commands which need to
        acquire passwords or passphrases (e.g. for HTTP or IMAP authentication)
        will call this program with a suitable prompt as command-line argument
        If this environment variable is set, then Git commands which need to
        acquire passwords or passphrases (e.g. for HTTP or IMAP authentication)
        will call this program with a suitable prompt as command-line argument

-       and read the password from its STDOUT. See also the 'core.askPass'
+       and read the password from its STDOUT. See also the `core.askPass`

        option in linkgit:git-config[1].
 
 `GIT_TERMINAL_PROMPT`::
        option in linkgit:git-config[1].
 
 `GIT_TERMINAL_PROMPT`::

diff --git a/Documentation/gitignore.txt b/Documentation/gitignore.txt
index 473623d6318a859c9ed2cf600222ea6cb4a25d4c..63260f0056491308cb35677917530a987c21c8a2 100644 (file)
--- a/Documentation/gitignore.txt
+++ b/Documentation/gitignore.txt
@@ -38,7 +38,7 @@ precedence, the last matching pattern decides the outcome):
  * Patterns read from `$GIT_DIR/info/exclude`.
 
  * Patterns read from the file specified by the configuration
  * Patterns read from `$GIT_DIR/info/exclude`.
 
  * Patterns read from the file specified by the configuration

-   variable 'core.excludesFile'.
+   variable `core.excludesFile`.

 
 Which file to place a pattern in depends on how the pattern is meant to
 be used.
 
 Which file to place a pattern in depends on how the pattern is meant to
 be used.

diff --git a/Documentation/gitremote-helpers.txt b/Documentation/gitremote-helpers.txt
index e2793279759bec3898c71e8614586418b4ff4206..1e8659492fda021b6a94cfdd4a2e1748e9104cbf 100644 (file)
--- a/Documentation/gitremote-helpers.txt
+++ b/Documentation/gitremote-helpers.txt
@@ -61,10 +61,10 @@ argument. If such a URL is encountered directly on the command line,
 the first argument is '<address>', and if it is encountered in a
 configured remote, the first argument is the name of that remote.
 
 the first argument is '<address>', and if it is encountered in a
 configured remote, the first argument is the name of that remote.
 

-Additionally, when a configured remote has 'remote.<name>.vcs' set to
+Additionally, when a configured remote has `remote.<name>.vcs` set to

 '<transport>', Git explicitly invokes 'git remote-<transport>' with
 '<name>' as the first argument. If set, the second argument is
 '<transport>', Git explicitly invokes 'git remote-<transport>' with
 '<name>' as the first argument. If set, the second argument is

-'remote.<name>.url'; otherwise, the second argument is omitted.
+`remote.<name>.url`; otherwise, the second argument is omitted.

 
 INPUT FORMAT
 ------------
 
 INPUT FORMAT
 ------------

diff --git a/Documentation/pretty-options.txt b/Documentation/pretty-options.txt
index 54b88b6dcaaa5df06fc8dad2e5f5172682269bc9..87e1317eed4bd140136d1db50e843478e2feee1d 100644 (file)
--- a/Documentation/pretty-options.txt
+++ b/Documentation/pretty-options.txt
@@ -26,7 +26,7 @@ people using 80-column terminals.
 --no-abbrev-commit::
        Show the full 40-byte hexadecimal commit object name. This negates
        `--abbrev-commit` and those options which imply it such as
 --no-abbrev-commit::
        Show the full 40-byte hexadecimal commit object name. This negates
        `--abbrev-commit` and those options which imply it such as

-       "--oneline". It also overrides the 'log.abbrevCommit' variable.
+       "--oneline". It also overrides the `log.abbrevCommit` variable.

 
 --oneline::
        This is a shorthand for "--pretty=oneline --abbrev-commit"
 
 --oneline::
        This is a shorthand for "--pretty=oneline --abbrev-commit"


@@ -51,7 +51,7 @@ ifndef::git-rev-list[]
        on the command line.
 +
 By default, the notes shown are from the notes refs listed in the
        on the command line.
 +
 By default, the notes shown are from the notes refs listed in the

-'core.notesRef' and 'notes.displayRef' variables (or corresponding
+`core.notesRef` and `notes.displayRef` variables (or corresponding

 environment overrides). See linkgit:git-config[1] for more details.
 +
 With an optional '<treeish>' argument, use the treeish to find the notes
 environment overrides). See linkgit:git-config[1] for more details.
 +
 With an optional '<treeish>' argument, use the treeish to find the notes