Make cvsexportcommit work with filenames with spaces and non-ascii characters.

This patch uses git-apply to do the patching which simplifies the code a lot
and also uses one pass to git-diff. git-apply gives information on added,
removed files as well as which files are binary.

Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.

Error handling was cleaned up, but not much tested.

Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

diff --git a/git-cvsexportcommit.perl b/git-cvsexportcommit.perl
index c9d1d88f2eafd9c3fa1ffec9ad9e7d997928c709..4863c91fe3c713c9e1b05d78b9bd22583ff4a4c0 100755 (executable)
--- a/git-cvsexportcommit.perl
+++ b/git-cvsexportcommit.perl
@@ -2,9 +2,8 @@
 
 # Known limitations:
 # - does not propagate permissions
 
 # Known limitations:
 # - does not propagate permissions

-# - tells "ready for commit" even when things could not be completed
-#   (not sure this is true anymore, more testing is needed)
-# - does not handle whitespace in pathnames at all.
+# - error handling has not been extensively tested
+#

 
 use strict;
 use Getopt::Std;
 
 use strict;
 use Getopt::Std;


@@ -115,49 +114,40 @@
 }
 close MSG;
 
 }
 close MSG;
 

-my (@afiles, @dfiles, @mfiles, @dirs);
-my %amodes;
-my @files = safe_pipe_capture('git-diff-tree', '-r', $parent, $commit);
-#print @files;
-$? && die "Error in git-diff-tree";
-foreach my $f (@files) {
-    chomp $f;
-    my @fields = split(m!\s+!, $f);
-    if ($fields[4] eq 'A') {
-        my $path = $fields[5];
-       $amodes{$path} = $fields[1];
-       push @afiles, $path;
-        # add any needed parent directories
-       $path = dirname $path;
-       while (!-d $path and ! grep { $_ eq $path } @dirs) {
-           unshift @dirs, $path;
-           $path = dirname $path;
-       }
-    }
-    if ($fields[4] eq 'M') {
-       push @mfiles, $fields[5];
-    }
-    if ($fields[4] eq 'D') {
-       push @dfiles, $fields[5];
-    }
+`git-diff-tree --binary -p $parent $commit >.cvsexportcommit.diff`;# || die "Cannot diff";
+
+## apply non-binary changes
+my $fuzz = $opt_p ? 0 : 2;
+
+print "Checking if patch will apply\n";
+
+my @stat;
+open APPLY, "GIT_DIR= git-apply -C$fuzz --binary --summary --numstat<.cvsexportcommit.diff|" || die "cannot patch";
+@stat=<APPLY>;
+close APPLY || die "Cannot patch";
+my (@bfiles,@files,@afiles,@dfiles);
+chomp @stat;
+foreach (@stat) {
+       push (@bfiles,$1) if m/^-\t-\t(.*)$/;
+       push (@files, $1) if m/^-\t-\t(.*)$/;
+       push (@files, $1) if m/^\d+\t\d+\t(.*)$/;
+       push (@afiles,$1) if m/^ create mode [0-7]+ (.*)$/;
+       push (@dfiles,$1) if m/^ delete mode [0-7]+ (.*)$/;

 }
 }

-my (@binfiles, @abfiles, @dbfiles, @bfiles, @mbfiles);
-@binfiles = grep m/^Binary files/, safe_pipe_capture('git-diff-tree', '-p', $parent, $commit);
-map { chomp } @binfiles;
-@abfiles = grep s/^Binary files \/dev\/null and b\/(.*) differ$/$1/, @binfiles;
-@dbfiles = grep s/^Binary files a\/(.*) and \/dev\/null differ$/$1/, @binfiles;
-@mbfiles = grep s/^Binary files a\/(.*) and b\/(.*) differ$/$1/, @binfiles;
-push @bfiles, @abfiles;
-push @bfiles, @dbfiles;
-push @bfiles, @mbfiles;
-push @mfiles, @mbfiles;
-
-$opt_v && print "The commit affects:\n ";
-$opt_v && print join ("\n ", @afiles,@mfiles,@dfiles) . "\n\n";
-undef @files; # don't need it anymore
+map { s/^"(.*)"$/$1/g } @bfiles,@files;
+map { s/\\([0-7]{3})/sprintf('%c',oct $1)/eg } @bfiles,@files;

 
 # check that the files are clean and up to date according to cvs
 my $dirty;
 
 # check that the files are clean and up to date according to cvs
 my $dirty;

+my @dirs;
+foreach my $p (@afiles) {
+    my $path = dirname $p;
+    while (!-d $path and ! grep { $_ eq $path } @dirs) {
+       unshift @dirs, $path;
+       $path = dirname $path;
+    }
+}
+

 foreach my $d (@dirs) {
     if (-e $d) {
        $dirty = 1;
 foreach my $d (@dirs) {
     if (-e $d) {
        $dirty = 1;


@@ -180,7 +170,8 @@
     }
 }
 
     }
 }
 

-foreach my $f (@mfiles, @dfiles) {
+foreach my $f (@files) {
+    next if grep { $_ eq $f } @afiles;

     # TODO:we need to handle removed in cvs
     my @status = grep(m/^File/,  safe_pipe_capture('cvs', '-q', 'status' ,$f));
     if (@status > 1) { warn 'Strange! cvs status returned more than one line?'};
     # TODO:we need to handle removed in cvs
     my @status = grep(m/^File/,  safe_pipe_capture('cvs', '-q', 'status' ,$f));
     if (@status > 1) { warn 'Strange! cvs status returned more than one line?'};


@@ -197,87 +188,26 @@
     }
 }
 
     }
 }
 

-###
-### NOTE: if you are planning to die() past this point
-###       you MUST call cleanupcvs(@files) before die()
-###
+print "Applying\n";
+`GIT_DIR= git-apply -C$fuzz --binary --summary --numstat --apply <.cvsexportcommit.diff` || die "cannot patch";

 
 

-
-print "Creating new directories\n";
+print "Patch applied successfully. Adding new files and directories to CVS\n";
+my $dirtypatch = 0;

 foreach my $d (@dirs) {
 foreach my $d (@dirs) {

-    unless (mkdir $d) {
-        warn "Could not mkdir $d: $!";
-       $dirty = 1;
-    }
-    `cvs add $d`;
-    if ($?) {
-       $dirty = 1;
+    if (system('cvs','add',$d)) {
+       $dirtypatch = 1;

        warn "Failed to cvs add directory $d -- you may need to do it manually";
     }
 }
 
        warn "Failed to cvs add directory $d -- you may need to do it manually";
     }
 }
 

-print "'Patching' binary files\n";
-
-foreach my $f (@bfiles) {
-    # check that the file in cvs matches the "old" file
-    # extract the file to $tmpdir and compare with cmp
-    if (not(grep { $_ eq $f } @afiles)) {
-        my $tree = safe_pipe_capture('git-rev-parse', "$parent^{tree}");
-       chomp $tree;
-       my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
-       chomp $blob;
-        `git-cat-file blob $blob > $tmpdir/blob`;
-        if (system('cmp', '-s', $f, "$tmpdir/blob")) {
-           warn "Binary file $f in CVS does not match parent.\n";
-           if (not $opt_f) {
-               $dirty = 1;
-               next;
-           }
-        }
-    }
-    if (not(grep { $_ eq $f } @dfiles)) {
-       my $tree = safe_pipe_capture('git-rev-parse', "$commit^{tree}");
-       chomp $tree;
-       my $blob = `git-ls-tree $tree "$f" | cut -f 1 | cut -d ' ' -f 3`;
-       chomp $blob;
-       # replace with the new file
-       `git-cat-file blob $blob > $f`;
-    }
-
-    # TODO: something smart with file modes
-
-}
-if ($dirty) {
-    cleanupcvs(@files);
-    die "Exiting: Binary files in CVS do not match parent";
-}
-
-## apply non-binary changes
-my $fuzz = $opt_p ? 0 : 2;
-
-print "Patching non-binary files\n";
-
-if (scalar(@afiles)+scalar(@dfiles)+scalar(@mfiles) != scalar(@bfiles)) {
-    print `(git-diff-tree -p $parent -p $commit | patch -p1 -F $fuzz ) 2>&1`;
-}
-
-my $dirtypatch = 0;
-if (($? >> 8) == 2) {
-    cleanupcvs(@files);
-    die "Exiting: Patch reported serious trouble -- you will have to apply this patch manually";
-} elsif (($? >> 8) == 1) { # some hunks failed to apply
-    $dirtypatch = 1;
-}
-

 foreach my $f (@afiles) {
 foreach my $f (@afiles) {

-    set_new_file_permissions($f, $amodes{$f});

     if (grep { $_ eq $f } @bfiles) {
       system('cvs', 'add','-kb',$f);
     } else {
       system('cvs', 'add', $f);
     }
     if ($?) {
     if (grep { $_ eq $f } @bfiles) {
       system('cvs', 'add','-kb',$f);
     } else {
       system('cvs', 'add', $f);
     }
     if ($?) {

-       $dirty = 1;
+       $dirtypatch = 1;

        warn "Failed to cvs add $f -- you may need to do it manually";
     }
 }
        warn "Failed to cvs add $f -- you may need to do it manually";
     }
 }


@@ -285,35 +215,40 @@
 foreach my $f (@dfiles) {
     system('cvs', 'rm', '-f', $f);
     if ($?) {
 foreach my $f (@dfiles) {
     system('cvs', 'rm', '-f', $f);
     if ($?) {

-       $dirty = 1;
+       $dirtypatch = 1;

        warn "Failed to cvs rm -f $f -- you may need to do it manually";
     }
 }
 
 print "Commit to CVS\n";
        warn "Failed to cvs rm -f $f -- you may need to do it manually";
     }
 }
 
 print "Commit to CVS\n";

-print "Patch: $title\n";
-my $commitfiles = join(' ', @afiles, @mfiles, @dfiles);
-my $cmd = "cvs commit -F .msg $commitfiles";
+print "Patch title (first comment line): $title\n";
+my @commitfiles = map { unless (m/\s/) { '\''.$_.'\''; } else { $_; }; } (@files);
+my $cmd = "cvs commit -F .msg @commitfiles";

 
 if ($dirtypatch) {
     print "NOTE: One or more hunks failed to apply cleanly.\n";
 
 if ($dirtypatch) {
     print "NOTE: One or more hunks failed to apply cleanly.\n";

-    print "Resolve the conflicts and then commit using:\n";
+    print "You'll need to apply the patch in .cvsexportcommit.diff manually\n";
+    print "using a patch program. After applying the patch and resolving the\n";
+    print "problems you may commit using:";

     print "\n    $cmd\n\n";
     exit(1);
 }
 
     print "\n    $cmd\n\n";
     exit(1);
 }
 

-

 if ($opt_c) {
     print "Autocommit\n  $cmd\n";
 if ($opt_c) {
     print "Autocommit\n  $cmd\n";

-    print safe_pipe_capture('cvs', 'commit', '-F', '.msg', @afiles, @mfiles, @dfiles);
+    print safe_pipe_capture('cvs', 'commit', '-F', '.msg', @files);

     if ($?) {
     if ($?) {

-       cleanupcvs(@files);

        die "Exiting: The commit did not succeed";
     }
     print "Committed successfully to CVS\n";
 } else {
     print "Ready for you to commit, just run:\n\n   $cmd\n";
 }
        die "Exiting: The commit did not succeed";
     }
     print "Committed successfully to CVS\n";
 } else {
     print "Ready for you to commit, just run:\n\n   $cmd\n";
 }

+
+# clean up
+unlink(".cvsexportcommit.diff");
+unlink(".msg");
+

 sub usage {
        print STDERR <<END;
 Usage: GIT_DIR=/path/to/.git ${\basename $0} [-h] [-p] [-v] [-c] [-f] [-m msgprefix] [ parent ] commit
 sub usage {
        print STDERR <<END;
 Usage: GIT_DIR=/path/to/.git ${\basename $0} [-h] [-p] [-v] [-c] [-f] [-m msgprefix] [ parent ] commit


@@ -321,17 +256,6 @@ END
        exit(1);
 }
 
        exit(1);
 }
 

-# ensure cvs is clean before we die
-sub cleanupcvs {
-    my @files = @_;
-    foreach my $f (@files) {
-       system('cvs', '-q', 'update', '-C', $f);
-       if ($?) {
-           warn "Warning! Failed to cleanup state of $f\n";
-       }
-    }
-}
-

 # An alternative to `command` that allows input to be passed as an array
 # to work around shell problems with weird characters in arguments
 # if the exec returns non-zero we die
 # An alternative to `command` that allows input to be passed as an array
 # to work around shell problems with weird characters in arguments
 # if the exec returns non-zero we die


@@ -346,12 +270,15 @@ sub safe_pipe_capture {
     return wantarray ? @output : join('',@output);
 }
 
     return wantarray ? @output : join('',@output);
 }
 

-# For any file we want to add to cvs, we must first set its permissions
-# properly, *before* the "cvs add ..." command.  Otherwise, it is impossible
-# to change the permission of the file in the CVS repository using only cvs
-# commands.  This should be fixed in cvs-1.12.14.
-sub set_new_file_permissions {
-    my ($file, $perm) = @_;
-    chmod oct($perm), $file
-      or die "failed to set permissions of \"$file\": $!\n";
+sub safe_pipe_capture_blob {
+    my $output;
+    if (my $pid = open my $child, '-|') {
+        local $/;
+       undef $/;
+       $output = (<$child>);
+       close $child or die join(' ',@_).": $! $?";
+    } else {
+       exec(@_) or die "$! $?"; # exec() can fail the executable can't be found
+    }
+    return $output;

 }
 }

diff --git a/t/t9200-git-cvsexportcommit.sh b/t/t9200-git-cvsexportcommit.sh
index c1024790e41693097d588b3c544a2e4b15ed71bf..ca0513b1621961f5fd9e589fc62820d42299eccc 100755 (executable)
--- a/t/t9200-git-cvsexportcommit.sh
+++ b/t/t9200-git-cvsexportcommit.sh
@@ -89,18 +89,17 @@ test_expect_success \
      ! git cvsexportcommit -c $id
      )'
 
      ! git cvsexportcommit -c $id
      )'
 

-# Should fail, but only on the git-cvsexportcommit stage
-test_expect_success \
-    'Fail to remove binary file more than one generation old' \
-    'git reset --hard HEAD^ &&
-     cat F/newfile6.png >>D/newfile4.png &&
-     git commit -a -m "generation 2 (again)" &&
-     rm -f D/newfile4.png &&
-     git commit -a -m "generation 3" &&
-     id=$(git rev-list --max-count=1 HEAD) &&
-     (cd "$CVSWORK" &&
-     ! git cvsexportcommit -c $id
-     )'
+#test_expect_success \
+#    'Fail to remove binary file more than one generation old' \
+#    'git reset --hard HEAD^ &&
+#     cat F/newfile6.png >>D/newfile4.png &&
+#     git commit -a -m "generation 2 (again)" &&
+#     rm -f D/newfile4.png &&
+#     git commit -a -m "generation 3" &&
+#     id=$(git rev-list --max-count=1 HEAD) &&
+#     (cd "$CVSWORK" &&
+#     ! git cvsexportcommit -c $id
+#     )'

 
 # We reuse the state from two tests back here
 
 
 # We reuse the state from two tests back here
 


@@ -108,7 +107,7 @@ test_expect_success \
 # fail with gnu patch, so cvsexportcommit must handle that.
 test_expect_success \
     'Remove only binary files' \
 # fail with gnu patch, so cvsexportcommit must handle that.
 test_expect_success \
     'Remove only binary files' \

-    'git reset --hard HEAD^^^ &&
+    'git reset --hard HEAD^^ &&

      rm -f D/newfile4.png &&
      git commit -a -m "test: remove only a binary file" &&
      id=$(git rev-list --max-count=1 HEAD) &&
      rm -f D/newfile4.png &&
      git commit -a -m "test: remove only a binary file" &&
      id=$(git rev-list --max-count=1 HEAD) &&


@@ -142,20 +141,73 @@ test_expect_success \
      diff F/newfile6.png ../F/newfile6.png
      )'
 
      diff F/newfile6.png ../F/newfile6.png
      )'
 

-test_expect_success 'Retain execute bit' '
-       mkdir G &&
-       echo executeon >G/on &&
-       chmod +x G/on &&
-       echo executeoff >G/off &&
-       git add G/on &&
-       git add G/off &&
-       git commit -a -m "Execute test" &&
-       (
-               cd "$CVSWORK" &&
-               git-cvsexportcommit -c HEAD
-               test -x G/on &&
-               ! test -x G/off
-       )
-'
+test_expect_success \
+     'New file with spaces in file name' \
+     'mkdir "G g" &&
+      echo ok then >"G g/with spaces.txt" &&
+      git add "G g/with spaces.txt" && \
+      cp ../test9200a.png "G g/with spaces.png" && \
+      git add "G g/with spaces.png" &&
+      git commit -a -m "With spaces" &&
+      id=$(git rev-list --max-count=1 HEAD) &&
+      (cd "$CVSWORK" &&
+      git-cvsexportcommit -c $id &&
+      test "$(echo $(sort "G g/CVS/Entries"|cut -d/ -f2,3,5))" = "with spaces.png/1.1/-kb with spaces.txt/1.1/"
+      )'
+
+test_expect_success \
+     'Update file with spaces in file name' \
+     'echo Ok then >>"G g/with spaces.txt" &&
+      cat ../test9200a.png >>"G g/with spaces.png" && \
+      git add "G g/with spaces.png" &&
+      git commit -a -m "Update with spaces" &&
+      id=$(git rev-list --max-count=1 HEAD) &&
+      (cd "$CVSWORK" &&
+      git-cvsexportcommit -c $id
+      test "$(echo $(sort "G g/CVS/Entries"|cut -d/ -f2,3,5))" = "with spaces.png/1.2/-kb with spaces.txt/1.2/"
+      )'
+
+# This test contains ISO-8859-1 characters
+test_expect_success \
+     'File with non-ascii file name' \
+     'mkdir -p Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö &&
+      echo Foo >Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.txt &&
+      git add Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.txt &&
+      cp ../test9200a.png Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.png &&
+      git add Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.png &&
+      git commit -a -m "Går det så går det" && \
+      id=$(git rev-list --max-count=1 HEAD) &&
+      (cd "$CVSWORK" &&
+      git-cvsexportcommit -v -c $id &&
+      test "$(echo $(sort Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/CVS/Entries|cut -d/ -f2,3,5))" = "gårdetsågårdet.png/1.1/-kb gårdetsågårdet.txt/1.1/"
+      )'
+
+test_expect_success \
+     'Mismatching patch should fail' \
+     'date >>"E/newfile5.txt" &&
+      git add "E/newfile5.txt" &&
+      git commit -a -m "Update one" &&
+      date >>"E/newfile5.txt" &&
+      git add "E/newfile5.txt" &&
+      git commit -a -m "Update two" &&
+      id=$(git rev-list --max-count=1 HEAD) &&
+      (cd "$CVSWORK" &&
+      ! git-cvsexportcommit -c $id
+      )'
+
+test_expect_success \
+     'Retain execute bit' \
+     'mkdir G &&
+      echo executeon >G/on &&
+      chmod +x G/on &&
+      echo executeoff >G/off &&
+      git add G/on &&
+      git add G/off &&
+      git commit -a -m "Execute test" &&
+      (cd "$CVSWORK" &&
+      git-cvsexportcommit -c HEAD
+      test -x G/on &&
+      ! test -x G/off
+      )'

 
 test_done
 
 test_done