* master:
stripspace: make sure not to leave an incomplete line.
git-commit: do not muck with commit message when no_edit is set.
When showing a commit message, do not lose an incomplete line.
Retire t5501-old-fetch-and-upload test.
stripspace: make sure not to leave an incomplete line.
When dealing with a commit log message for human consumption, it
never makes sense to keep a log that ends with an incomplete
line, so make it a part of the clean-up process done by
git-stripspace.
Acked-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-commit: do not muck with commit message when no_edit is set.
Spotted by Linus and Darrin Thompson. When we took a commit
message from -F <file> with an incomplete line, we appended "git
status" output, which ended up attaching a lone "#" at the end.
We still need the "do we have anything to commit?" check by
running "status" (which has to know what to do in different
cases with -i/-o/-a), but there is no point appending its output
to the proposed commit message given by the user.
combine-diff: do not lose hunks with only deletion at end.
We used to lose hunks that appear at the end and have only
deletion. This makes sure that the record beyond the end of
file (which holds such deletions) is examined.
Ok this really should be the good version. The option
handling has been reworked to be automation safe.
Currently to import the -mm tree I have to work around
git-apply by using patch. Because some of Andrews
patches in quilt will only apply with fuzz.
I started out implementing a --fuzz option and then I realized
fuzz is not a very safe concept for an automated system. What
you really want is a minimum number of context lines that must
match. This allows policy to be set without knowing how many
lines of context a patch actually provides. By default
the policy remains to match all provided lines of context.
Allowng git-apply to match a restricted set of context makes
it much easier to import the -mm tree into git. I am still only
processing 1.5 to 1.6 patches a second for the 692 patches in
2.6.17-rc1-mm2 is still painful but it does help.
If I just loop through all of Andrews patches in order
and run git-apply --index -C1 I process the entire patchset
in 1m53s or about 6 patches per second. So running
git-mailinfo, git-write-tree, git-commit-tree, and
git-update-ref everytime has a measurable impact,
and shows things can be speeded up even more.
All of these timings were taking on my poor 700Mhz Athlon
with 512MB of ram. So people with fast machiens should
see much better performance.
When a match is found after the number of context are reduced a
warning is generated. Since this is a rare event and possibly
dangerous this seems to make sense. Unless you are patching
a single file the error message is a little bit terse at
the moment, but it should be easy to go back and fix.
I have also updated the documentation for git-apply to reflect
the new -C option that sets the minimum number of context
lines that must match.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
blame and friends: adjust to multiple pathspec change.
This makes things that include revision.h build again.
Blame is also built, but I am not sure how well it works (or how
well it worked to begin with) -- it was relying on tree-diff to
be using whatever pathspec was used the last time, which smells
a bit suspicious.
Without this flag, "git log -p paths..." shows commits that
touch the specified paths, and diffs about the same specified
paths. With this, the full diff is shown for commits that touch
the specified paths.
The way tree-diff was set up assumed we would use only one set
of pathspec during the entire life of the program. Move the
pathspec related static variables out to diff_options structure
so that we can filter commits with one set of paths while show
the actual diffs using different set of paths.
I suspect this breaks blame.c, and makes "git log paths..." to
default to the --full-diff, the latter of which is dealt with
the next commit.
Nobody except diff-stages used it -- the callers instead filtered
the input to diffcore themselves. Make diff-stages do that as
well and retire diffcore-pathspec.
This separates out the part that deals with one-commit diff-tree
(and --stdin form) into a separate log-tree module.
There are two goals with this. The more important one is to be
able to make this part available to "git log --diff", so that we
can have a native "git whatchanged" command. Another is to
simplify the commit log generation part simpler.
The parent rewriting feature caused us to create the whole history in one
go, and then simplify it later, because of how rewrite_parents() had been
written. However, with a little tweaking, it's perfectly possible to do
even that one incrementally.
Right now, this doesn't really much matter, because every user of
"--parents" will probably generally _also_ use "--topo-order", which will
cause the old non-incremental behaviour anyway. However, I'm hopeful that
we could make even the topological sort incremental, or at least
_partially_ so (for example, make it incremental up to the first merge).
In the meantime, this at least moves things in the right direction, and
removes a strange special case.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
xdiff/xdiffi.c: fix warnings about possibly uninitialized variables
Compiling this module gave the following warnings (some double dutch!):
xdiff/xdiffi.c: In functie 'xdl_recs_cmp':
xdiff/xdiffi.c:298: let op: 'spl.i1' may be used uninitialized in this function
xdiff/xdiffi.c:298: let op: 'spl.i2' may be used uninitialized in this function
xdiff/xdiffi.c:219: let op: 'fbest1' may be used uninitialized in this function
xdiff/xdiffi.c:219: let op: 'bbest1' may be used uninitialized in this function
A superficial tracking of their usage, without deeper knowledge about the
algorithm, indeed confirms that there are code paths on which these
variables will be used uninitialized. In practice these code paths might never
be reached, but then these fixes will not change the algorithm. If these
code paths are ever reached we now at least have a predictable outcome. And
should the very small performance impact of these initializations be
noticeable, then they should at least be replaced by comments why certain
code paths will never be reached.
Some extra initializations in this patch now fix the warnings.
When a broken pair is matched up by rename detector to be merged
back, we do not want to say it is "dissimilar" with the
similarity index. The output should just say they were changed,
taking the break score left by the earlier diffcore-break run if
any.
* jc/blame:
blame -S <ancestry-file>
Match ofs/cnt types in diff interface.
blame: use built-in xdiff
combine-diff: move the code to parse hunk-header into common library.
combine-diff: refactor built-in xdiff interface.
combine-diff: use built-in xdiff.
* master:
gitk: Fix incorrect invocation of getmergediffline
[PATCH] gitk: Fix searching for filenames in gitk
count-delta: match get_delta_hdr_size() changes.
check patch_delta bounds more carefully
git-svnimport: Don't assume that copied files haven't changed
Don't assume that a file that SVN claims was copied from somewhere
else is bit-for-bit identical with its parent, since SVN allows
changes to copied files before they are committed.
Without this fix, such copy-modify-commit operations causes the
imported file to lack the "modify" part -- that is, we get subtle data
corruption.
Signed-off-by: Karl Hasselström <kha@treskal.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jens Axboe noticed that recent "git push" has become very slow
since we made --thin transfer the default.
Thin pack generation to push a handful revisions that touch
relatively small number of paths out of huge tree was stupid; it
registered _everything_ from the excluded revisions. As a
result, "Counting objects" phase was unnecessarily expensive.
This changes the logic to register the blobs and trees from
excluded revisions only for paths we are actually going to send
to the other end.
Recent revision.c updates completely broken the assignment of
blames by not rewriting commit->parents field unless explicitly
asked to by the caller. The caller needs to set revs.parents.
* jc/date:
date parsing: be friendlier to our European friends.
Tweaks to make asciidoc play nice.
git-commit: document --amend
Avoid a crash if realloc returns a different pointer.
Avoid a divide by zero if there's no messages to send.
[PATCH] Provide configurable UI font for gitk
[PATCH] gitk: Use git wrapper to run git-ls-remote.
[PATCH] gitk: add key bindings for selecting first and last commit
gitk: Add a help menu item to display key bindings
[PATCH] gitk: allow goto heads
gitk: replace parent and children arrays with lists
date parsing: be friendlier to our European friends.
This does three things, only applies to cases where the user
manually tries to override the author/commit time by environment
variables, with non-ISO, non-2822 format date-string:
- Refuses to use the interpretation to put the date in the
future; recent kernel history has a commit made with
10/03/2006 which is recorded as October 3rd.
- Adds '.' as the possible year-month-date separator. We
learned from our European friends on the #git channel that
dd.mm.yyyy is the norm there.
- When the separator is '.', we prefer dd.mm.yyyy over
mm.dd.yyyy; otherwise mm/dd/yy[yy] takes precedence over
dd/mm/yy[yy].
* git://git.kernel.org/pub/scm/gitk/gitk:
[PATCH] Provide configurable UI font for gitk
[PATCH] gitk: Use git wrapper to run git-ls-remote.
[PATCH] gitk: add key bindings for selecting first and last commit
gitk: Add a help menu item to display key bindings
[PATCH] gitk: allow goto heads
gitk: replace parent and children arrays with lists
This command removes untracked files from the working tree. This
implementation is based on cg-clean with some simplifications. The
documentation is included.
[jc: with trivial documentation fix, noticed by Jakub Narebski]
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
If git is not built with NO_EXPAT, this patch changes git-http-fetch to
attempt using DAV to get a list of remote packs and fall back to using
objects/info/packs if the DAV request fails.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the font used in the UI elements of gitk configurable in the
same way the other fonts are. The default fonts used in the Xft build of
tk8.5 are particularily horrific, making this change more important
there.
Signed-off-by: Keith Packard <keithp@neko.keithp.com> Acked-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] gitk: Use git wrapper to run git-ls-remote.
For some reason, the Cygwin Tcl's `exec' command has trouble running
scripts. Fix this by using the C `git' wrapper. Other GIT programs run
by gitk are written in C already, so we don't need to incur a
performance hit of going via the wrapper (which I'll bet isn't pretty
under Cygwin).
Signed-off-by: Mark Wooding <mdw@distorted.org.uk> Acked-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
[PATCH] gitk: add key bindings for selecting first and last commit
For a keyboard addict like me some keys are still missing from
gitk. Especially a key to select a commit when no commit is selected,
like just after startup. While we're at it, complete the bindings for
moving the view seperately from the selected line. Currently, the up
and down keys act on the selected line while pageup and pagedown act
on the commits viewed.
The idea is to have to normal keys change the selected line:
- Home selects first commit
- End selects last commit
- Up selects previous commit
- Down selects next commit
- PageUp moves selected line one page up
- PageDown moves selected line one page down
...and together with the Control key, it moves the commits view:
- Control-Home views first page of commits
- Control-End views last page of commits
- Control-Up moves commit view one line up
- Control-Down moves commit view one line down
- Control-PageUp moves commit view one page up
- Control-PageDown moves commit view one page down
Signed-off-By: Rutger Nijlunsing <gitk@tux.tmfweb.nl>
and with some cleanups and simplifications... Signed-off-by: Paul Mackerras <paulus@samba.org>
This simplifies code, and also fixes a subtle bug: when importing in a
shared repository, where another user last imported from CVS, cvsimport
used to complain that it could not open <branch> for update.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/combine:
combine-diff: use built-in xdiff.
GIT 1.3.0-rc2
Set HTTP user agent to git/GIT_VERSION
git-ls-remote: send no-cache header when fetching info/refs