git-format-patch.txt: don't show -s as shorthand for multiple options
git-format-patch recognizes -s as shorthand only for --signoff, however,
its documentation shows -s as shorthand for both --signoff and
--no-patch. Resolve this confusion by suppressing the bogus -s shorthand
for --no-patch.
While here, also avoid showing the --no-patch option in git-format-patch
documentation since it doesn't make sense to ask to suppress the patch
while at the same time explicitly asking to format the patch (which,
after all, is the purpose of git-format-patch).
Reported-by: Kevin Brodsky <corax26@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a branch, currently only the HEAD of current working tree
is updated, but it must update HEADs of all working trees which point at
the old branch.
This is the current behavior, /path/to/wt's HEAD is not updated:
Add a new function set_worktree_head_symref, to update HEAD symref for
the specified worktree.
To update HEAD of a linked working tree,
create_symref("worktrees/$work_tree/HEAD", "refs/heads/$branch", msg)
could be used. However when it comes to updating HEAD of the main
working tree, it is unusable because it uses $GIT_DIR for
worktree-specific symrefs (HEAD).
The new function takes git_dir (real directory) as an argument, and
updates HEAD of the working tree. This function will be used when
renaming a branch.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Acked-by: David Turner <dturner@twopensource.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5520: test --[no-]autostash with pull.rebase=true
The "--[no-]autostash" options for git-pull are only valid in
rebase mode (i.e. either --rebase is used or pull.rebase=true).
Existing tests already check the cases when --rebase is used but
fail to check for pull.rebase=true case.
Add two new tests to check that the --[no-]autostash options work
with pull.rebase=true.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two tests are almost similar and thus can be folded in a for-loop.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out common code into test_pull_autostash_fail() and then call it in
these tests.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5520: factor out common "successful autostash" code
Four tests contains repetitive lines of code.
Factor out common code into test_pull_autostash() and then call it in
these tests.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking stderr output using test_i18ncmp may lead to test failure as
some shells write trace output to stderr when run under 'set -x'.
Use test_i18ngrep instead of test_i18ncmp.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test title says that tests are done with rebase.autostash unset,
but does not take any action to make sure that it is indeed unset.
This may lead to test failure if future changes somehow pollutes
the configuration globally.
Ensure consistent test conditions by explicitly unsetting
rebase.autostash.
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5520: use consistent capitalization in test titles
Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jacob Nisnevich <jacob.nisnevich@gmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mergetools: create mergetool_find_win32_cmd() helper function for winmerge
Signed-off-by: Jacob Nisnevich <jacob.nisnevich@gmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The startup_info data, which records if we are working inside a
repository (among other things), are now uniformly available to Git
subcommand implementations, and Git avoids attempting to touch
references when we are not in a repository.
* jk/startup-info:
use setup_git_directory() in test-* programs
grep: turn off gitlink detection for --no-index
mailmap: do not resolve blobs in a non-repository
remote: don't resolve HEAD in non-repository
setup: set startup_info->have_repository more reliably
setup: make startup_info available everywhere
A test for tags has been restructured so that more parts of it can
easily be run on a platform without a working GnuPG.
* es/test-gpg-tags:
t6302: skip only signed tags rather than all tests when GPG is missing
t6302: also test annotated in addition to signed tags
t6302: normalize names and descriptions of signed tags
lib-gpg: drop unnecessary "missing GPG" warning
The "--local-env-vars" and "--resolve-git-dir" options of "git
rev-parse" failed to work outside a repository when the command's
option parsing was rewritten in 1.8.5 era.
* jk/rev-parse-local-env-vars:
rev-parse: let some options run outside repository
t1515: add tests for rev-parse out-of-repo helpers
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
The credential.helper configuration variable is cumulative and
there is no good way to override it from the command line. As
a special case, giving an empty string as its value now serves
as the signal to clear the values specified in various files.
* jk/credential-clear-config:
credential: let empty credential specs reset helper list
The end-user facing Porcelain level commands like "diff" and "log"
now enables the rename detection by default.
* mm/diff-renames-default:
diff: activate diff.renames by default
log: introduce init_log_defaults()
t: add tests for diff.renames (true/false/unset)
t4001-diff-rename: wrap file creations in a test
Documentation/diff-config: fix description of diff.renames
The link to Documentation/git-commandname.txt was obviously broken.
Remove the link and make it clear that it is not a literal path name by
using *italics* in makdown.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file was renamed in 4ad21f5 (README: use markdown syntax,
2016-02-25), but that commit forgot to update git.spec.in, which
caused the rpmbuild target in the Makefile to fail.
Reported-by: Ron Isaacson <isaacson.ljits@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In successful operation `write_pack_data` will close the `bundle_fd`,
but when we exit early, we need to take care of the file descriptor
as well as the lock file ourselves. The lock file may be deleted at the
end of running the program, but we are in library code, so we should
not rely on that.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`split` is of type `struct strbuf **`, and currently we are leaking split
itself as well as each element in split[i]. We have a dedicated free
function for `struct strbuf **`, which takes care of freeing all
related memory.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes: don't leak memory in git_config_get_notes_strategy
This function asks for the value of a configuration and after
using the value does not have to retain ownership of it.
git_config_get_string_const() however is a function to get a
copy of the value, but we forget to free it before we return.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
forward = parse_binary_hunk(&buffer, &size, &status, &used);
if (!forward && !status)
/* there has to be one hunk (forward hunk) */
return error(_("unrecognized binary patch at line %d"), linenr-1);
so parse_binary() can return -1, because that's what error() returns.
Also parse_binary_hunk() sets "status" to -1 in case of error and
parse_binary() does "if (status) return status;".
In this case parse_chunk() should not add -1 to the patchsize it computes.
It is better for future libification efforts to make it just return -1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-pack: fix --all option when used with directory
When using git send-pack with --all option
and a target repository specification ([<host>:]<directory>),
usage message is being displayed instead of performing
the actual transmission.
The reason for this issue is that destination and refspecs are being set
in the same conditional and are populated from argv. When a target
repository is passed, refspecs is being populated as well with its value.
This makes the check for refspecs not being NULL to always return true,
which, in conjunction with the check for --all or --mirror options,
is always true as well and returns usage message instead of proceeding.
This ensures that send-pack will stop execution only when --all
or --mirror switch is used in conjunction with any refspecs passed.
Signed-off-by: Stanislav Kolotinskiy <stanislav@assembla.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore: fix iteration order of identical files during rename detection
If the two paths 'dir/A/file' and 'dir/B/file' have identical content
and the parent directory is renamed, e.g. 'git mv dir other-dir', then
diffcore reports the following exact renames:
While technically not wrong, this is confusing not only for the user,
but also for git commands that make decisions based on rename
information, e.g. 'git log --follow other-dir/A/file' follows
'dir/B/file' past the rename.
This behavior is a side effect of commit v2.0.0-rc4~8^2~14
(diffcore-rename.c: simplify finding exact renames, 2013-11-14): the
hashmap storing sources returns entries from the same bucket, i.e.
sources matching the current destination, in LIFO order. Thus the
iteration first examines 'other-dir/A/file' and 'dir/B/file' and, upon
finding identical content and basename, reports an exact rename.
Other hashmap users are apparently happy with the current iteration
order over the entries of a bucket. Changing the iteration order
would risk upsetting other hashmap users and would increase the memory
footprint of each bucket by a pointer to the tail element.
Fill the hashmap with source entries in reverse order to restore the
original exact rename detection behavior.
Reported-by: Bill Okara <billokara@gmail.com> Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the local convention of the project is to use tab width that is
not 8, it may make sense to allow "git log --expand-tabs=<n>" to
tweak the output to match it.
pretty: enable --expand-tabs by default for selected pretty formats
"git log --pretty={medium,full,fuller}" and "git log" by default
prepend 4 spaces to the log message, so it makes sense to enable
the new "expand-tabs" facility by default for these formats.
Add --no-expand-tabs option to override the new default.
The change alone breaks a test in t4201 that runs "git shortlog"
on the output from "git log", and expects that the output from
"git log" does not do such a tab expansion. Adjust the test to
explicitly disable expand-tabs with --no-expand-tabs.
pretty: expand tabs in indented logs to make things line up properly
A commit log message sometimes tries to line things up using tabs,
assuming fixed-width font with the standard 8-place tab settings.
Viewing such a commit however does not work well in "git log", as
we indent the lines by prefixing 4 spaces in front of them.
This should all line up:
Column 1 Column 2
-------- --------
A B
ABCD EFGH
SPACES Instead of Tabs
Even with multi-byte UTF8 characters:
Column 1 Column 2
-------- --------
Ä B
åäö 100
A Møøse once bit my sister..
Tab-expand the lines in "git log --expand-tabs" output before
prefixing 4 spaces.
This is based on the patch by Linus Torvalds, but at this step, we
require an explicit command line option to enable the behaviour.
Signed-off-by: Sven Strickroth <sven@cs-ware.de> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSVC: vsnprintf in Visual Studio 2015 doesn't need SNPRINTF_SIZE_CORR any more
In MSVC2015 the behavior of vsnprintf was changed.
W/o this fix there is one character missing at the end.
Signed-off-by: Sven Strickroth <sven@cs-ware.de> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Acked-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch -d: refuse deleting a branch which is currently checked out
When a branch is checked out by current working tree, deleting the
branch is forbidden. However when the branch is checked out only by
other working trees, deleting incorrectly succeeds.
Use find_shared_symref() to check if the branch is in use, not just
comparing with the current working tree's HEAD.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
By adding this option which defaults to true, we can use the
corresponding --no-checkout to make some customizations before
the checkout, like sparse checkout, etc.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Ray Zhang <zhanglei002@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase-i: print an abbreviated hash when stop for editing
The message that is shown when rebase-i stops for editing prints
the full hash of the commit where it stopped which makes the message
overflow to the next line on smaller terminal windows. Print an
abbreviated hash instead.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
OPT_CMDMODE mechanism was introduced in the release of 1.8.5 to actively
notice when multiple "operation mode" options that specify mutually
incompatible operation modes are given.
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/mingw-tests-2.8:
mingw: skip some tests in t9115 due to file name issues
t1300: fix the new --show-origin tests on Windows
t1300-repo-config: make it resilient to being run via 'sh -x'
config --show-origin: report paths with forward slashes
The hashmap API provides hashmap_iter_first() helper for initialion
and getting the first entry of a hashmap. Let's use it instead of
doing initialization manually and then get the first entry.
There are no functional changes, just cleanup.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge: refuse to create too cool a merge by default
While it makes sense to allow merging unrelated histories of two
projects that started independently into one, in the way "gitk" was
merged to "git" itself aka "the coolest merge ever", such a merge is
still an unusual event. Worse, if somebody creates an independent
history by starting from a tarball of an established project and
sends a pull request to the original project, "git merge" however
happily creates such a merge without any sign of something unusual
is happening.
Teach "git merge" to refuse to create such a merge by default,
unless the user passes a new "--allow-unrelated-histories" option to
tell it that the user is aware that two unrelated projects are
merged.
Because such a "two project merge" is a rare event, a configuration
option to always allow such a merge is not added.
We could add the same option to "git pull" and have it passed
through to underlying "git merge". I do not have a fundamental
opposition against such a feature, but this commit does not do so
and instead leaves it as low-hanging fruit for others, because such
a "two project merge" would be done after fetching the other project
into some location in the working tree of an existing project and
making sure how well they fit together, it is sufficient to allow a
local merge without such an option pass-through from "git pull" to
"git merge". Many tests that are updated by this patch does the
pass-through manually by turning:
merge: fix NULL pointer dereference when merging nothing into void
When we are on an unborn branch and merging only one foreign parent,
we allow "git merge" to fast-forward to that foreign parent commit.
This codepath incorrectly attempted to dereference the list of
parents that the merge is going to record even when the list is
empty. It must refuse to operate instead when there is no parent.
All other codepaths make sure the list is not empty before they
dereference it, and are safe.
Reported-by: Jose Ivan B. Vilarouca Filho Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git -c var=value" option stuffs the config value into
$GIT_CONFIG_PARAMETERS, so that sub-processes can see it.
When the config is later read via git_config() or similar,
we parse it back out of that variable. The parsing end is a
little bit picky; it assumes that each entry was generated
with sq_quote_buf(), and that there is no extraneous
whitespace.
On the generating end, we are careful to append to an
existing $GIT_CONFIG_PARAMETERS variable if it exists.
However, our test for "should we add a space separator" is
too liberal: it will add one even if the environment
variable exists but is empty. As a result, you might end up
with:
GIT_CONFIG_PARAMETERS=" 'core.foo=bar'"
which the parser will choke on.
This was hard to trigger in older versions of git, since we
only set the variable when we had something to put into it
(though you could certainly trigger it manually). But since 14111fc (git: submodule honor -c credential.* from command
line, 2016-02-29), the submodule code will unconditionally
put the $GIT_CONFIG_PARAMETERS variable into the environment
of any operation in the submodule, whether it is empty or
not. So any of those operations which themselves use "git
-c" will generate the unparseable value and fail.
We can easily fix it by catching this case on the generating
side. While we're adding a test, let's also check that
multiple layers of "git -c" work, which was previously not
tested at all.
Reported-by: Shin Fan <shinfan@google.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Tested-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw: skip some tests in t9115 due to file name issues
These two tests wanted to write file names which are incompatible with
Windows' file naming rules (even if they pass using Cygwin due to
Cygwin's magic path mangling).
While at it, skip the same tests also on MacOSX/HFS, as pointed out by
Torsten Bögershausen.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, we have that funny situation where the test script can refer
to POSIX paths because it runs in a shell that uses a POSIX emulation
layer ("MSYS2 runtime"). Yet, git.exe does *not* understand POSIX paths
at all but only pure Windows paths.
So let's just convert the POSIX paths to Windows paths before passing
them on to Git, using `pwd` (which is already modified on Windows to
output Windows paths).
While fixing the new tests on Windows, we also have to exclude the tests
that want to write a file with a name that is illegal on Windows
(unfortunately, there is more than one test trying to make use of that
file).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1300-repo-config: make it resilient to being run via 'sh -x'
One way to diagnose broken regression tests is to run the test
script using 'sh -x t... -i -v' to find out which call actually
demonstrates the symptom.
Hence it is pretty counterproductive if the test script behaves
differently when being run via 'sh -x', in particular when using
test_cmp or test_i18ncmp on redirected stderr. A more recent way
"sh tXXXX -i -v -x" has the same issue.
So let's use test_i18ngrep (as suggested by Jonathan Nieder) instead of
test_cmp/test_i18ncmp to verify that stderr looks as expected.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: fix regression for deinit without submodules
Per Cederqvist wrote:
> It used to be possible to run
>
> git submodule deinit -f .
>
> to remove any submodules, no matter how many submodules you had. That
> is no longer possible in projects that don't have any submodules at
> all. The command will fail with:
>
> error: pathspec '.' did not match any file(s) known to git.
This regression was introduced in 74703a1e4dfc (submodule: rewrite
`module_list` shell function in C, 2015-09-02), as we changed the
order of checking in new module listing to first check whether it is
a gitlin before feeding it to match_pathspec(). It used to be that
a pathspec that does not match any path were diagnosed as an error,
but the new code complains for a pathspec that does not match any
submodule path.
Arguably the new behaviour may give us a better diagnosis, but that
is inconsistent with the suggestion "deinit" gives, and also this
was an unintended accident. The new behaviour hopefully can be
redesigned and implemented better in future releases, but for now,
switch these two checks to restore the same behavior as before. In
an empty repository, giving the pathspec '.' will still get the same
"did not match" error, but that is the same bug we had before 1.7.0.
Reported-by: Per Cederqvist <cederp@opera.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tag: add the option to force signing of annotated tags
The `tag.forcesignannotated` configuration variable makes "git tag"
that would implicitly create an annotated tag to instead create a
signed tag. For example
$ git tag -m "This is a message" tag-with-message
$ git tag -F message-file tag-with-message
would create a signed tag if the configuration variable is in
effect. To override this from the command line, the user can
explicitly ask for an annotated tag, like so:
$ git tag -a -m "This is a message" tag-with-message
$ git tag -a -F message-file tag-with-message
Creation of a light-weight tag, i.e.
$ git tag lightweight
is not affected.
Signed-off-by: Laurent Arnoud <laurent@spkdev.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: remove unused call to free() in gitdiff_{old,new}name()
These two functions keep a copy of filename it was given, let
gitdiff_verify_name() to rewrite it to a new filename and then free
the original if they receive a newly minted filename.
However
(1) when the original name is NULL, gitdiff_verify_name() returns
either NULL or a newly minted value. Either case, we do not
have to worry about calling free() on the original NULL.
(2) when the original name is not NULL, gitdiff_verify_name()
either returns that as-is, or calls die() when it finds
inconsistency in the patch. When the function returns, we know
that "if ()" statement always is false.
When concluding a conflicted "git merge --squash", the command
failed to read SQUASH_MSG that was prepared by "git merge", and
showed only the "# Conflicts:" list of conflicted paths.
Place the contents from SQUASH_MSG at the beginning, just like we
show the commit log skeleton first when concluding a normal merge,
and then show the "# Conflicts:" list, to help the user write the
log message for the resulting commit.
Test by Junio C Hamano <gitster@pobox.com>.
Signed-off-by: Sven Strickroth <sven@cs-ware.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If rebase.autoStash configuration variable is set, there is no way to
override it for "git pull --rebase" from the command line.
Teach "git pull --rebase" the --[no-]autostash command line flag which
overrides the current value of rebase.autoStash, if set. As "git rebase"
understands the --[no-]autostash option, it's just a matter of passing
the option to underlying "git rebase" when "git pull --rebase" is called.
Helped-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Paul Tan <pyokagan@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-pull makes a seperate call to git_config_get_bool() to read the value
of "rebase.autostash". This can be reduced as a call to git_config() is
already there in the code.
Introduce a callback function git_pull_config() to read "rebase.autostash"
along with other variables.
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Paul Tan <pyokagan@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Mehul Jain <mehul.jain2029@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that st_add4() has been patched to work around the gcc 4.2.x
compiler crash, revert the sledge-hammer approach of forcing Mac OS X
10.6 to unconditionally use 'clang' rather than the default compiler
(gcc).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util: st_add4: work around gcc 4.2.x compiler crash
Although changes by 5b442c4 (tree-diff: catch integer overflow in
combine_diff_path allocation, 2016-02-19) are perfectly valid, they
unfortunately trigger an internal compiler error in gcc 4.2.x:
combine-diff.c: In function 'diff_tree_combined':
combine-diff.c:1391: internal compiler error: Segmentation fault: 11
Experimentation reveals that changing st_add4()'s argument evaluation
order is sufficient to sidestep this problem.
Although st_add3() does not trigger the compiler bug, for style
consistency, change its argument evaluation order to match.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'master' of git://ozlabs.org/~paulus/gitk
* 'master' of git://ozlabs.org/~paulus/gitk:
gitk: Follow themed bgcolor in help dialogs
gitk: fr.po: Sync translations with git
gitk: Update French translation (311t)
gitk: Update German translation
gitk: Update Bulgarian translation (311t)