* tr/valgrind-test-fix:
Revert "test-lib: allow prefixing a custom string before "ok N" etc."
Revert "test-lib: support running tests under valgrind in parallel"
The codepath that send_pack() calls pack_objects() mistakenly
closed the same file descriptor twice, leading to potentially
closing a wrong file descriptor that was opened in the meantime.
* jl/pack-transfer-avoid-double-close:
Clear fd after closing to avoid double-close error
All callers to parse_pathspec() must choose between getting no
pathspec or one path that is limited to the current directory
when there is no paths given on the command line, but there were
two callers that violated this rule, triggering a BUG().
* nd/magic-pathspec:
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
"git checkout topic", when there is not yet a local "topic" branch
but there is a unique remote-tracking branch for a remote "topic"
branch, pretended as if "git checkout -t -b topic remote/$r/topic"
(for that unique remote $r) was run. This hack however was not
implemented for "git checkout topic --".
* mm/checkout-auto-track-fix:
checkout: proper error message on 'git checkout foo bar --'
checkout: allow dwim for branch creation for "git checkout $branch --"
* fc/styles:
block-sha1/sha1.c: have SP around arithmetic operators
base85.c: have SP around arithmetic operators
archive.c: have SP around arithmetic operators
alloc.c: have SP around arithmetic operators
abspath.c: have SP around arithmetic operators
alias: have SP around arithmetic operators
C: have space around && and || operators
One long-standing flaw in the pack transfer protocol used by "git
clone" was that there was no way to tell the other end which branch
"HEAD" points at, and the receiving end needed to guess. A new
capability has been defined in the pack protocol to convey this
information so that cloning from a repository with more than one
branches pointing at the same commit where the HEAD is at now
reliably sets the initial branch in the resulting repository.
* jc/upload-pack-send-symref:
t5570: Update for clone-progress-to-stderr branch
t5570: Update for symref capability
clone: test the new HEAD detection logic
connect: annotate refs with their symref information in get_remote_head()
connect.c: make parse_feature_value() static
upload-pack: send non-HEAD symbolic refs
upload-pack: send symbolic ref information as capability
upload-pack.c: do not pass confusing cb_data to mark_our_ref()
t5505: fix "set-head --auto with ambiguous HEAD" test
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
git clone now reports its progress to standard error, which throws off
t5570. Using test_i18ngrep instead of test_cmp allows the test to be
more flexible by only looking for the expected error and ignoring any
other output from the program.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jx/relative-path-regression-fix:
Use simpler relative_path when set_git_dir
relative_path should honor dos-drive-prefix
test: use unambigous leading path (/foo) for MSYS
Merge branch 'jk/clone-progress-to-stderr' into maint
"git clone" gave some progress messages to the standard output, not to
the standard error, and did not allow suppressing them with the
"--no-progress" option.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
sha1_file: move comment about return value where it belongs
Commit 5b0864070 (sha1_object_info_extended: make type calculation
optional, Jul 12 2013) changed the return value of the
sha1_object_info_extended function to 0/-1 for success/error.
Previously this function returned the object type for success or
-1 for error. But unfortunately the above commit forgot to change
or move the comment above this function that says "returns enum
object_type or negative".
To fix this inconsistency, let's move the comment above the
sha1_object_info function where it is still true.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In shorten_unambiguous_ref, we build and cache a reverse-map of the
rev-parse rules like this:
static char **scanf_fmts;
static int nr_rules;
if (!nr_rules) {
for (; ref_rev_parse_rules[nr_rules]; nr_rules++)
... generate scanf_fmts ...
}
where ref_rev_parse_rules is terminated with a NULL pointer.
Compiling with "gcc -O2 -Wall" does not cause any problems, but
compiling with "-O3 -Wall" generates:
$ make CFLAGS='-O3 -Wall' refs.o
refs.c: In function ‘shorten_unambiguous_ref’:
refs.c:3379:29: warning: array subscript is above array bounds [-Warray-bounds]
for (; ref_rev_parse_rules[nr_rules]; nr_rules++)
Curiously, we can silence this by explicitly nr_rules to 0
in the beginning of the loop, even though the compiler
should be able to tell that we follow this code path only
when nr_rules is already 0.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
At first glance, it might appear that the caller of checkout_entry()
can specify to which path the contents are written out by the last
parameter, and it is tempting to add "const" in front of its type.
In reality, however, topath[] is to point at a buffer to store the
temporary path generated by the callchain originating from this
function, and the temporary path is always short, much shorter than
the buffer prepared by its only caller in builtin/checkout-index.c.
Document the code a bit to clarify so that future callers know how
to use the function better.
Noticed-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old code does not do boundary check so any paths longer than
PATH_MAX can cause buffer overflow. Replace it with strbuf to handle
paths of arbitrary length.
The OS may reject if the path is too long though. But in that case we
report the cause (e.g. name too long) and usually move on to checking
out the next entry.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 1bbcc224 ("http: refactor options to http_get_*", 28-09-2013)
changed the type of final 'options' argument of the http_get_file()
function from an int to an 'struct http_get_options' pointer.
However, it neglected to update the (single) call site. Since this
call was passing '0' to that argument, it was (correctly) being
interpreted as a null pointer. Change to argument to NULL.
Noticed by sparse. ("Using plain integer as NULL pointer")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jc/ls-files-killed-optim' into maint
"git ls-files -k" needs to crawl only the part of the working tree
that may overlap the paths in the index to find killed files, but
shared code with the logic to find all the untracked files, which
made it unnecessarily inefficient.
* jc/ls-files-killed-optim:
dir.c::test_one_path(): work around directory_exists_in_index_icase() breakage
t3010: update to demonstrate "ls-files -k" optimization pitfalls
ls-files -k: a directory only can be killed if the index has a non-directory
dir.c: use the cache_* macro to access the current index
Merge branch 'jh/checkout-auto-tracking' into maint
"git branch --track" had a minor regression in v1.8.3.2 and later
that made it impossible to base your local work on anything but a
local branch of the upstream repository you are tracking from.
* jh/checkout-auto-tracking:
t3200: fix failure on case-insensitive filesystems
branch.c: Relax unnecessary requirement on upstream's remote ref name
t3200: Add test demonstrating minor regression in 41c21f2
Refer to branch.<name>.remote/merge when documenting --track
t3200: Minor fix when preparing for tracking failure
t2024: Fix &&-chaining and a couple of typos
When there is no sufficient overlap between old and new history
during a "git fetch" into a shallow repository, objects that the
sending side knows the receiving end has were unnecessarily sent.
* nd/fetch-into-shallow:
Add testcase for needless objects during a shallow fetch
list-objects: mark more commits as edges in mark_edges_uninteresting
list-objects: reduce one argument in mark_edges_uninteresting
upload-pack: delegate rev walking in shallow fetch to pack-objects
shallow: add setup_temporary_shallow()
shallow: only add shallow graft points to new shallow file
move setup_alternate_shallow and write_shallow_commits to shallow.c
Cleanups and tweaks for credential handling to work with ancient versions
of the gnome-keyring library that are still in use.
* bc/gnome-keyring:
contrib/git-credential-gnome-keyring.c: support really ancient gnome-keyring
contrib/git-credential-gnome-keyring.c: support ancient gnome-keyring
contrib/git-credential-gnome-keyring.c: report failure to store password
contrib/git-credential-gnome-keyring.c: use glib messaging functions
contrib/git-credential-gnome-keyring.c: use glib memory allocation functions
contrib/git-credential-gnome-keyring.c: use secure memory for reading passwords
contrib/git-credential-gnome-keyring.c: use secure memory functions for passwds
contrib/git-credential-gnome-keyring.c: use gnome helpers in keyring_object()
contrib/git-credential-gnome-keyring.c: set Gnome application name
contrib/git-credential-gnome-keyring.c: ensure buffer is non-empty before accessing
contrib/git-credential-gnome-keyring.c: strlen() returns size_t, not ssize_t
contrib/git-credential-gnome-keyring.c: exit non-zero when called incorrectly
contrib/git-credential-gnome-keyring.c: add static where applicable
contrib/git-credential-gnome-keyring.c: *style* use "if ()" not "if()" etc.
contrib/git-credential-gnome-keyring.c: remove unused die() function
contrib/git-credential-gnome-keyring.c: remove unnecessary pre-declarations
Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
Clear fd after closing to avoid double-close error
In send_pack(), clear the fd passed to pack_objects() by setting
it to -1, since pack_objects() closes the fd (via a call to
run_command()). Likewise, in get_pack(), clear the fd passed to
run_command().
Not doing so risks having git_transport_push(), caller of
send_pack(), closing the fd again, possibly incorrectly closing
some other open file; or similarly with fetch_refs_from_pack(),
indirect caller of get_pack().
Signed-off-by: Jens Lindström <jl@opera.com> Acked-by: Jeff King <peff@peff.net> Acked-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revert "test-lib: allow prefixing a custom string before "ok N" etc."
Now that ad0e623 (test-lib: support running tests under valgrind in
parallel, 2013-06-23) has been reverted, this support code has no
users any more. Revert it, too.
--valgrind-parallel was broken from the start: during review I made
the whole valgrind setup code conditional on not being a
--valgrind-parallel worker child. But even the children crucially
need $GIT_VALGRIND to be set; it should therefore have been set
outside the conditional.
The fix would be a two-liner, but since the introduction of the
feature, almost four months have passed without anyone noticing that
it is broken. So this feature is not worth the about hundred lines of
test-lib.sh complexity. Revert it.
Signed-off-by: Thomas Rast <tr@thomasrast.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone now reports its progress to standard error, which throws off
t5570. Using test_i18ngrep instead of test_cmp allows the test to be
more flexible by only looking for the expected error and ignoring any
other output from the program.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/clone-progress-to-stderr' into jc/upload-pack-send-symref
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
The gitk manpage suffers from a bit of neglect: there have been only
minor changes, and no changes to the set of options documented, since a2df1fb (Documentation: New GUI configuration and command-line
options., 2008-11-13). In the meantime, the set of rev-list options
has been expanded several times by options that are useful in gitk,
e.g., --ancestry-path and the optional globbing for --branches, --tags
and --remotes.
Restructure and expand the manpage. List more options that the author
perceives as useful, while remaining somewhat terse. Ideally the user
should not have to look up any of the references, but we dispense with
precise explanations in some places and refer to git-log(1) instead.
Note that the options that have an easy GUI equivalent (e.g.,
--word-diff, -S, --grep) are deliberately not listed even in the cases
where they simply fill in the GUI fields.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix calling parse_pathspec with no paths nor PATHSPEC_PREFER_* flags
When parse_pathspec() is called with no paths, the behavior could be
either return no paths, or return one path that is cwd. Some commands
do the former, some the latter. parse_pathspec() itself does not make
either the default and requires the caller to specify either flag if
it may run into this situation.
I've grep'd through all parse_pathspec() call sites. Some pass
neither, but those are guaranteed never pass empty path to
parse_pathspec(). There are two call sites that may pass empty path
and are fixed with this patch.
[jc: added a test from Antoine's bug report]
Reported-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document rules to use GIT_REFLOG_ACTION variable in the scripted
Porcelain. git-rebase--interactive locally violates them, but it
is a leaf user that does not call out to or dot-source other
scripts, so it does not urgently need to be fixed.
* jc/reflog-doc:
setup_reflog_action: document the rules for using GIT_REFLOG_ACTION
* sb/repack-in-c:
repack: improve warnings about failure of renaming and removing files
repack: retain the return value of pack-objects
repack: rewrite the shell script in C
Some progress and diagnostic messages from "git clone" were
incorrectly sent to the standard output stream, not to the standard
error stream.
* jk/clone-progress-to-stderr:
clone: always set transport options
clone: treat "checking connectivity" like other progress
clone: send diagnostic messages to stderr
checkout: proper error message on 'git checkout foo bar --'
The previous code was detecting the presence of "--" by looking only at
argument 1. As a result, "git checkout foo bar --" was interpreted as an
ambiguous file/revision list, and errored out with:
error: pathspec 'foo' did not match any file(s) known to git.
error: pathspec 'bar' did not match any file(s) known to git.
error: pathspec '--' did not match any file(s) known to git.
This patch fixes it by walking through the argument list to find the
"--", and now complains about the number of references given.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout: allow dwim for branch creation for "git checkout $branch --"
The "--" notation disambiguates files and branches, but as a side-effect
of the previous implementation, also disabled the branch auto-creation
when $branch does not exist.
A possible scenario is then:
git checkout $branch
=> fails if $branch is both a ref and a file, and suggests --
git checkout $branch --
=> refuses to create the $branch
This patch allows the second form to create $branch, and since the -- is
provided, it does not look for file named $branch.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When drawing the graph of an octopus merge, we draw a horizontal line
from parents 3 and above into the asterisk representing the commit. The
sections of this line should be colored to match the graph lines coming
in from above.
However, if the commit is not in the left-most column we do not take
into account the columns to the left of the commit when calculating
these colors. Fix this by adding the appropriate offset to the column
index used for calculating the color.
Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This file isn't really harmful, but isn't useful either, and can create
minor annoyance for the user:
* It's confusing, as the presence of a *.pid file often implies that a
process is currently running. A user running "ls .git/" and finding
this file may incorrectly guess that a "git gc" is currently running.
* Leaving this file means that a "git gc" in an already gc-ed repo is
no-longer a no-op. A user running "git gc" in a set of repositories,
and then synchronizing this set (e.g. rsync -av, unison, ...) will see
all the gc.pid files as changed, which creates useless noise.
This patch unlinks the file after the garbage collection is done, so that
gc.pid is actually present only during execution.
Future versions of Git may want to use the information left in the gc.pid
file (e.g. for policies like "don't attempt to run a gc if one has
already been ran less than X hours ago"). If so, this patch can safely be
reverted. For now, let's not bother the users.
Explained-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Improved-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean up the internal of the name-hash mechanism used to work
around case insensitivity on some filesystems to cleanly fix a
long-standing API glitch where the caller of cache_name_exists()
that ask about a directory with a counted string was required to
have '/' at one location past the end of the string.
* es/name-hash-no-trailing-slash-in-dirs:
dir: revert work-around for retired dangerous behavior
name-hash: stop storing trailing '/' on paths in index_state.dir_hash
employ new explicit "exists in index?" API
name-hash: refactor polymorphic index_name_exists()
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
The test 'choking "git rm" should not let it die with cruft' is
supposed to check 'git rm's behavior when interrupted by provoking a
SIGPIPE while 'git rm' is busily deleting files from a specially
crafted index.
This test is silently broken for the following reasons:
- The test crafts a special index by feeding a large number of index
entries with null shas to 'git update-index --index-info'. It was
OK back then when this test was introduced in commit 0693f9ddad
(Make sure lockfiles are unlocked when dying on SIGPIPE,
2008-12-18), but since commit 4337b5856f (do not write null sha1s to
on-disk index, 2012-07-28) null shas are not allowed in the on-disk
index causing 'git update-index' to error out.
- The barfing 'git update-index --index-info' should fail the test,
but it remains unnoticed because of the severely broken && chain:
the test's result depends solely on whether there is a stale lock
file left behind, but after 'git update-index' errors out 'git rm'
won't be executed at all.
To fix this test feed only non-null shas to 'git update-index' and
restore the && chain (partly by adding a missing && and by using the
test_when_finished helper instead of manual cleanup).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a15d069 taught git to use curl's SOCKOPTFUNCTION hook
to turn on TCP keepalives. However, modern versions of curl
have a TCP_KEEPALIVE option, which can do this for us. As an
added bonus, the curl code knows how to turn on keepalive
for a much wider variety of platforms. The only downside to
using this option is that not everybody has a new enough curl.
Let's split our keepalive options into three conditionals:
1. With curl 7.25.0 and newer, we rely on curl to do it
right.
2. With older curl that still knows SOCKOPTFUNCTION, we
use the code from a15d069.
3. Otherwise, we are out of luck, and the call is a no-op.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.bogomips.org/git-svn:
git-svn: Warn about changing default for --prefix in Git v2.0
Documentation/git-svn: Promote the use of --prefix in docs + examples
git-svn.txt: elaborate on rev_map files
git-svn.txt: replace .git with $GIT_DIR
git-svn.txt: reword description of gc command
git-svn.txt: fix AsciiDoc formatting error
git-svn: fix signed commit parsing