The slightly misleading name die_bug() of the function intended to
report a bug is actually called always, and only reports a bug if the
passed-in parameter `err` is non-zero.
It uses die_errno() to report the bug, to helpfully include the error
message corresponding to `err`.
However, as these messages indicate bugs, we really should use BUG().
And as BUG() is a macro to be able to report the exact file and line
number, we need to convert die_bug() to a macro instead of only
replacing the die_errno() by a call to BUG().
While at it, use a name more indicative of the purpose: CHECK_BUG().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call BUG(), we signal via SIGABRT that something bad happened,
dumping cores if so configured. In some setups these coredumps are
redirected to some central place such as /proc/sys/kernel/core_pattern,
which is a good thing.
However, when we try to verify in our test suite that bugs are caught in
certain code paths, we do *not* want to clutter such a central place
with unnecessary coredumps.
So let's special-case the test helpers (which we use to verify such code
paths) so that the BUG() calls will *not* call abort() but exit with a
special-purpose exit code instead.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The correct name in git-send-email.perl is aliasfiletype [1]. There are
actually two instances of this misspelling. The other was found and
fixed in 6068ac8848 (completion: add missing configuration variables -
2010-12-20)
[1] 994d6c66d3 (send-email: address expansion for common mailers - 2006-05-14)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: validation and documentation about unreachable options
These options are added in [1] [2] [3]. All these depend on running
rev-list internally which is normally true since they are always used
with "--all --objects" which implies --revs. But let's keep this
dependency explicit.
While at there, add documentation for them. These are mostly used
internally by git-repack. But it's still good to not chase down the
right commit message to know how they work.
[1] ca11b212eb (let pack-objects do the writing of unreachable objects
as loose objects - 2008-05-14)
[2] 08cdfb1337 (pack-objects --keep-unreachable - 2007-09-16)
[3] e26a8c4721 (repack: extend --keep-unreachable to loose objects -
2016-06-13)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the missing `-o` shortcut for `--push-option` to the synopsis.
Add the missing `-d` shortcut for `--delete` in the main section.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com> Reviewed-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the two '<path>' parameters in DESCRIPTION mandatory and
move the `--options` part to the same place where the other
variants show them. And finally make `--no-index` in SYNOPSIS
as mandatory as in DESCRIPTION.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com> Reviewed-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typeset commands and similar things with as `git foo` instead of
'git foo' or 'git-foo' and add linkgit to the commands which run
the hooks.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com> Reviewed-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i --root: let the sequencer handle even the initial part
In this developer's earlier attempt to accelerate interactive rebases by
converting large parts from Unix shell script into portable, performant
C, the --root handling was specifically excluded (to simplify the task a
little bit; it still took over a year to get that reduced set of patches
into Git proper).
This patch ties up that loose end: now only --preserve-merges uses the
slow Unix shell script implementation to perform the interactive rebase.
As the rebase--helper reports progress to stderr (unlike the scripted
interactive rebase, which reports it to stdout, of all places), we have
to adjust a couple of tests that did not expect that for `git rebase -i
--root`.
This patch fixes -- at long last! -- the really old bug reported in 6a6bc5bdc4d (add tests for rebasing root, 2013-06-06) that rebasing with
--root *always* rewrote the root commit, even if there were no changes.
The bug still persists in --preserve-merges mode, of course, but that
mode will be deprecated as soon as the new --rebase-merges mode
stabilizes, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: learn about the special "fake root commit" handling
When an interactive rebase wants to recreate a root commit, it
- first creates a new, empty root commit,
- checks it out,
- converts the next `pick` command so that it amends the empty root
commit
Introduce support in the sequencer to handle such an empty root commit,
by looking for the file <GIT_DIR>/rebase-merge/squash-onto; if it exists
and contains a commit name, the sequencer will compare the HEAD to said
root commit, and if identical, a new root commit will be created.
While converting scripted code into proper, portable C, we also do away
with the old "amend with an empty commit message, then cherry-pick
without committing, then amend again" dance and replace it with code
that uses the internal API properly to do exactly what we want: create a
new root commit.
To keep the implementation simple, we always spawn `git commit` to create
new root commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the context of the new --rebase-merges mode, which was designed
specifically to allow for changing the existing branch topology
liberally, a user may want to extract commits into a completely fresh
branch that starts with a newly-created root commit.
This is now possible by inserting the command `reset [new root]` before
`pick`ing the commit that wants to become a root commit. Example:
reset [new root]
pick 012345 a commit that is about to become a root commit
pick 234567 this commit will have the previous one as parent
This does not conflict with other uses of the `reset` command because
`[new root]` is not (part of) a valid ref name: both the opening bracket
as well as the space are illegal in ref names.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: extract helper to update active_cache_tree
This patch extracts the code from is_index_unchanged() to initialize or
update the index' cache tree (i.e. a tree object reflecting the current
index' top-level tree).
The new helper will be used in the upcoming code to support `git rebase
-i --root` via the sequencer.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
{fetch,upload}-pack: support filter in protocol v2
The fetch-pack/upload-pack protocol v2 was developed independently of
the filter parameter (used in partial fetches), thus it did not include
support for it. Add support for the filter parameter.
Like in the legacy protocol, the server advertises and supports "filter"
only if uploadpack.allowfilter is configured.
Like in the legacy protocol, the client continues with a warning if
"--filter" is specified, but the server does not advertise it.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The upload-pack code paths never call git_config() with
upload_pack_config() when protocol v2 is used, causing options like
uploadpack.packobjectshook to not take effect. Ensure that this function
is called.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When bisecting a performance regression using a config file,
`./bisect_regression --config my_perf.conf` for example, the
config file can contain Codespeed configuration which would
instruct the 'aggregate.perl' script called by the 'run'
script to output results in the Codespeed format and maybe
to try to send this output to a Codespeed server.
This is unfortunate because the 'bisect_run_script' relies
on the regular output from 'aggregate.perl' to mesure
performance, so let's disable Codespeed output and sending
results to a Codespeed server.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- git add .
- git status
- git commit
- git show (or git diff HEAD)
one would expect to have analogous output from git status and git show
(or similar diff-related programs). This is generally not the case, as
git status has hard coded values for diff related options.
With this commit the hard coded settings are dropped from the status
command in favour for values provided by git_diff_ui_config.
What follows are some remarks on the concrete options which were hard
coded in git status:
diffopt.detect_rename
Since the very beginning of git status in a3e870f2e2 ("Add "commit"
helper script", 2005-05-30), git status always used rename detection,
whereas with commands like show and log one had to activate it with a
command line option. After 5404c116aa ("diff: activate diff.renames by
default", 2016-02-25) the default behaves the same by coincidence, but
changing diff.renames to other values can break the consistency between
git status and other commands again. With this commit one control the
same default behaviour with diff.renames.
diffopt.rename_limit
Similarly one has the option diff.renamelimit to adjust this limit for
all commands but git status. With this commit git status will also honor
those.
diffopt.break_opt
Unlike the other two options this cannot be configured by a
configuration option yet. This commit will also change the default
behaviour to not use break rewrites. But as rename detection is most
likely on, this is dangerous to be activated anyway as one can see
here:
Signed-off-by: Eckhard S. Maaß <eckhard.s.maass@gmail.com> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When shown the email summary, an opportunity is presented for the user
to edit the email as if they had specified --annotate. This also permits
them to edit it multiple times.
Signed-off-by: Drew DeVault <sir@cmpwn.com> Reviewed-by: Simon Ser <contact@emersion.fr> Helped-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible to configure 'less', the pager, to use an alternate
screen to show the content, for example, by setting LESS=RS in the
environment. When it is closed in this configuration, it switches
back to the original screen, and all content is gone.
It is not uncommon to request that the output remains visible in
the terminal. For this, the option --no-pager can be used. But
it is a bit cumbersome to type, even when command completion is
available. Provide a short option, -P, to make the option more
easily accessible.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-drop-caches: simplify delay loading of NtSetSystemInformation
Take advantage of the recent addition of support for lazy loading functions[1]
on Windows to simplify the loading of NtSetSystemInformation.
[1] db2f7c48cb (Win32: simplify loading of DLL functions, 2017-09-25)
Signed-off-by: Ben Peart <benpeart@microsoft.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, this line was introduced in 3145ea957d2c ("upload-pack: introduce
fetch server command", 2018-03-15), which did not contain a test for the
case which causes this error to be printed, so introduce a test.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'bw/protocol-v2' into jt/partial-clone-proto-v2
The beginning of the next-gen transfer protocol.
* bw/protocol-v2: (35 commits)
remote-curl: don't request v2 when pushing
remote-curl: implement stateless-connect command
http: eliminate "# service" line when using protocol v2
http: don't always add Git-Protocol header
http: allow providing extra headers for http requests
remote-curl: store the protocol version the server responded with
remote-curl: create copy of the service name
pkt-line: add packet_buf_write_len function
transport-helper: introduce stateless-connect
transport-helper: refactor process_connect_service
transport-helper: remove name parameter
connect: don't request v2 when pushing
connect: refactor git_connect to only get the protocol version once
fetch-pack: support shallow requests
fetch-pack: perform a fetch using v2
upload-pack: introduce fetch server command
push: pass ref prefixes when pushing
fetch: pass ref prefixes when fetching
ls-remote: pass ref prefixes when requesting a remote's refs
transport: convert transport_get_remote_refs to take a list of ref prefixes
...
doc: keep first level section header in upper case
When formatted as a man page, 1st section header is always in upper
case even if we write it otherwise. Make all 1st section headers
uppercase to keep it close to the final output.
This does affect html since case is kept there, but I still think it's
a good idea to maintain a consistent style for 1st section headers.
Some sections perhaps should become second sections instead, where
case is kept, and for better organization. I will update if anyone has
suggestions about this.
While at there I also make some header more consistent (e.g. examples
vs example) and fix a couple minor things here and there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive add script hard-codes the object ID of the empty tree.
To avoid any problems when changing hashes, compute this value when used
and cache it for any future uses.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update shell scripts to compute empty tree object ID
Several of our shell scripts hard-code the object ID of the empty tree.
To avoid any problems when changing hashes, compute this value on
startup of the script. For performance, store the value in a variable
and reuse it throughout the life of the script.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: only expose empty object constants through git_hash_algo
There really isn't any case in which we want to expose the constants for
empty trees and blobs outside of using the hash algorithm abstraction.
Make these constants static and stop exposing the defines in cache.h.
Remove the constants which are no longer in use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To ensure that we are hash algorithm agnostic, use the_hash_algo to look
up the object ID for the empty blob instead of using the empty_tree_oid
variable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: use the_hash_algo for empty tree object ID
To ensure that we are hash algorithm agnostic, use the_hash_algo to look
up the object ID for the empty tree instead of using the empty_tree_oid
variable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When comparing an object ID against that of the empty tree, use the
is_empty_tree_oid function to ensure that we abstract over the hash
algorithm properly. In addition, this is more readable than a plain
oidcmp.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: convert cached object code to struct object_id
Convert the code that looks up cached objects to use struct object_id.
Adjust the lookup for empty trees to use the_hash_algo. Note that we
don't need to be concerned about the hard-coded object ID in the
empty_tree object since we never use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge: convert empty tree constant to the_hash_algo
To avoid dependency on a particular hash algorithm, convert a use of
EMPTY_TREE_SHA1_HEX to use the_hash_algo->empty_tree instead. Since
both branches now use oid_to_hex, condense the if statement into a
ternary.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/merge: switch tree functions to use object_id
The read_empty and reset_hard functions are static and their callers
have already changed to use struct object_id, so convert them as well.
To avoid dependency on the hash algorithm in use, switch from using
EMPTY_TREE_SHA1_HEX to using empty_tree_oid_hex.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1-file: add functions for hex empty tree and blob OIDs
Oftentimes, we'll want to refer to an empty tree or empty blob by its
hex name without having to call oid_to_hex or explicitly refer to
the_hash_algo. Add helper functions that format these values into
static buffers and return them for easy use.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/receive-pack: avoid hard-coded constants for push certs
Use the GIT_SHA1_RAWSZ and GIT_SHA1_HEXSZ macros instead of hard-coding
the constants 20 and 40. Switch one use of 20 with a format specifier
for a hex value to use the hex constant instead, as the original appears
to have been a typo.
At this point, avoid converting the hard-coded use of SHA-1 to use
the_hash_algo. SHA-1, even if not collision resistant, is secure in the
context in which it is used here, and the hash algorithm of the repo
need not match what is used here. When we adopt a new hash algorithm,
we can simply adopt the new algorithm wholesale here, as the nonce is
opaque and its length and validity are entirely controlled by the
server. Consequently, defer updating this code until that point.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: replace use of several hard-coded constants
Update several uses of hard-coded 40-based constants to use either
the_hash_algo or GIT_MAX_HEXSZ, as appropriate. Replace a combined use
of oid_to_hex and memcpy with oid_to_hex_r, which not only avoids the
need for a constant, but is more efficient. Make use of parse_oid_hex
to eliminate the need for constants and simplify the code at the same
time. Update some comments to no longer refer to SHA-1 as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir: convert struct untracked_cache_dir to object_id
Convert the exclude_sha1 member of struct untracked_cache_dir and rename
it to exclude_oid. Eliminate several hard-coded integral constants, and
update a function name that referred to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for reading certain pack v2 offsets had a hard-coded 5
representing the number of uint32_t words that we needed to skip over.
Specify this value in terms of a value from the_hash_algo.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-redundant: convert linked lists to use struct object_id
Convert struct llist_item and the rest of the linked list code to use
struct object_id. Add a use of GIT_MAX_HEXSZ to avoid a dependency on a
hard-coded constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert struct submodule and struct parse_config_parameter to use struct
object_id. Adjust the functions which take members of these structures
as arguments to also use struct object_id. Include cache.h into
submodule-config.h to make struct object_id visible.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several instances of the constant 20 and 20-based values in
the packfile code. Abstract away dependence on SHA-1 by using the
values from the_hash_algo instead.
Use unsigned values for temporary constants to provide the compiler with
more information about what kinds of values it should expect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
packfile: remove unused member from struct pack_entry
The sha1 member in struct pack_entry is unused except for one instance
in which we store a value in it. Since nobody ever reads this value,
don't bother to compute it and remove the member from struct pack_entry.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
server-info: remove unused members from struct pack_info
The head member of struct pack_info is completely unused and the
nr_heads member is used only in one place, which is an assignment. This
member was last usefully used in 3e15c67c90 (server-info: throw away T
computation as well, 2005-12-04).
Since this structure member is not useful, remove it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache: add a function to read an object ID from a buffer
In various places throughout the codebase, we need to read data into a
struct object_id from a pack or other unsigned char buffer. Add an
inline function that does this based on the current hash algorithm in
use, and use it in several places.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: fix outdated comment on in_commit_list
The in_commit_list() method does not check the parents of
the candidate for containment in the list. Fix the comment
that incorrectly states that it does.
Reported-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
coccinelle: avoid wrong transformation suggestions from commit.cocci
The semantic patch 'contrib/coccinelle/commit.cocci' added in 2e27bd7731 (treewide: replace maybe_tree with accessor methods,
2018-04-06) is supposed to "ensure that all references to the
'maybe_tree' member of struct commit are either mutations or accesses
through get_commit_tree()". So get_commit_tree() clearly must be able
to directly access the 'maybe_tree' member, and 'commit.cocci' has a
bit of a roundabout workaround to ensure that get_commit_tree()'s
direct access in its return statement is not transformed: after all
references to 'maybe_tree' have been transformed to a call to
get_commit_tree(), including the reference in get_commit_tree()
itself, the last rule transforms back a 'return get_commit_tree()'
statement, back then found only in get_commit_tree() itself, to a
direct access.
Unfortunately, already the very next commit shows that this workaround
is insufficient: 7b8a21dba1 (commit-graph: lazy-load trees for
commits, 2018-04-06) extends get_commit_tree() with a condition
directly accessing the 'maybe_tree' member, and Coccinelle with
'commit.cocci' promptly detects it and suggests a transformation to
avoid it. This transformation is clearly wrong, because calling
get_commit_tree() to access 'maybe_tree' _in_ get_commit_tree() would
obviously lead to recursion. Furthermore, the same commit added
another, more specialized getter function get_commit_tree_in_graph(),
whose legitimate direct access to 'maybe_tree' triggers a similar
wrong transformation suggestion.
Exclude both of these getter functions from the general rule in
'commit.cocci' that matches their direct accesses to 'maybe_tree'.
Also exclude load_tree_for_commit(), which, as static helper funcion
of get_commit_tree_in_graph(), has legitimate direct access to
'maybe_tree' as well.
The last rule transforming back 'return get_commit_tree()' statements
to direct accesses thus became unnecessary, remove it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch: make cover letters always text/plain
When formatting a series of patches using --attach and --cover-letter,
the cover letter lacks the closing MIME boundary, violating RFC 2046.
Certain clients, such as Thunderbird, discard the message body in such a
case.
Since the cover letter is just one part and sending it as
multipart/mixed is not very useful, always emit it as text/plain,
avoiding the boundary problem altogether.
Reported-by: Patrick Hemmer <git@stormcloud9.net> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack_trees: fix breakage when o->src_index != o->dst_index
Currently, all callers of unpack_trees() set o->src_index == o->dst_index.
The code in unpack_trees() does not correctly handle them being different.
There are two separate issues:
First, there is the possibility of memory corruption. Since
unpack_trees() creates a temporary index in o->result and then discards
o->dst_index and overwrites it with o->result, in the special case that
o->src_index == o->dst_index, it is safe to just reuse o->src_index's
split_index for o->result. However, when src and dst are different,
reusing o->src_index's split_index for o->result will cause the
split_index to be shared. If either index then has entries replaced or
removed, it will result in the other index referring to free()'d memory.
Second, we can drop the index extensions. Previously, we were moving
index extensions from o->dst_index to o->result. Since o->src_index is
the one that will have the necessary extensions (o->dst_index is likely to
be a new index temporary index created to store the results), we should be
moving the index extensions from there.
Signed-off-by: Elijah Newren <newren@gmail.com> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test: correct detection of UTF8_NFD_TO_NFC for APFS
On HFS (which is the default Mac filesystem prior to High Sierra),
unicode names are "decomposed" before recording.
On APFS, which appears to be the new default filesystem in Mac OS High
Sierra, filenames are recorded as specified by the user.
APFS continues to allow the user to access it via any name
that normalizes to the same thing.
This difference causes t0050-filesystem.sh to fail two tests.
Improve the test for a NFD/NFC in test-lib.sh:
Test if the same file can be reached in pre- and decomposed unicode.
Reported-By: Elijah Newren <newren@gmail.com> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Tested-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase --skip: clean up commit message after a failed fixup/squash
During a series of fixup/squash commands, the interactive rebase builds
up a commit message with comments. This will be presented to the user in
the editor if at least one of those commands was a `squash`.
In any case, the commit message will be cleaned up eventually, removing
all those intermediate comments, in the final step of such a
fixup/squash chain.
However, if the last fixup/squash command in such a chain fails with
merge conflicts, and if the user then decides to skip it (or resolve it
to a clean worktree and then continue the rebase), the current code
fails to clean up the commit message.
This commit fixes that behavior.
The fix is quite a bit more involved than meets the eye because it is
not only about the question whether we are `git rebase --skip`ing a
fixup or squash. It is also about removing the skipped fixup/squash's
commit message from the accumulated commit message. And it is also about
the question whether we should let the user edit the final commit
message or not ("Was there a squash in the chain *that was not
skipped*?").
For example, in this case we will want to fix the commit message, but
not open it in an editor:
pick <- succeeds
fixup <- succeeds
squash <- fails, will be skipped
This is where the newly-introduced `current-fixups` file comes in real
handy. A quick look and we can determine whether there was a non-skipped
squash. We only need to make sure to keep it up to date with respect to
skipped fixup/squash commands. As a bonus, we can even avoid committing
unnecessarily, e.g. when there was only one fixup, and it failed, and
was skipped.
To fix only the bug where the final commit message was not cleaned up
properly, but without fixing the rest, would have been more complicated
than fixing it all in one go, hence this commit lumps together more than
a single concern.
For the same reason, this commit also adds a bit more to the existing
test case for the regression we just fixed.
The diff is best viewed with --color-moved.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: always commit without editing when asked for
Previously, we only called run_git_commit() without EDIT_MSG when we also
passed in a default message.
However, an upcoming caller will want to commit without EDIT_MSG and
*without* a default message: to clean up fixup/squash comments in HEAD's
commit message.
Let's prepare for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: Handle "combination of <n> commits" with GETTEXT_POISON
We previously relied on the localized versions of
# This is a combination of <N> commits
(which we write into the commit messages during fixup/squash chains)
to contain <N> encoded in ASCII.
This is not true in general, and certainly not true when compiled with
GETTEXT_POISON=TryToKillMe, as demonstrated by the regression test we
just introduced in t3418.
So let's decouple keeping track of the count from the (localized) commit
messages by introducing a new file called 'current-fixups' that keeps
track of the current fixup/squash chain. This file contains a bit more
than just the count (it contains a list of "fixup <commit>"/"squash
<commit>" lines). This is done on purpose, as it will come in handy for
a fix for the bug where `git rebase --skip` on a final fixup/squash will
leave the commit message in limbo.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: demonstrate bugs with fixup!/squash! commit messages
When multiple fixup/squash commands are processed and the last one
causes merge conflicts and is skipped, we leave the "This is a
combination of ..." comments in the commit message.
Noticed by Eric Sunshine.
This regression test also demonstrates that we rely on the localized
version of
# This is a combination of <number> commits
to contain the <number> in ASCII, which breaks under GETTEXT_POISON.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that grafts are deprecated, we should start to assume that readers
have no idea what grafts are. So it makes more sense to make the
description of the "shallow" feature stand on its own.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The graft file is deprecated now, so let's use replace refs in the example
in filter-branch's man page instead.
Suggested-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The grafts feature was a convenient way to "stitch together" ancient
history to the fresh start of linux.git.
Its implementation is, however, not up to Git's standards, as there are
too many ways where it can lead to surprising and unwelcome behavior.
For example, when pushing from a repository with active grafts, it is
possible to miss commits that have been "grafted out", resulting in a
broken state on the other side.
Also, the grafts feature is limited to "rewriting" commits' list of
parents, it cannot replace anything else.
The much younger feature implemented as `git replace` set out to remedy
those limitations and dangerous bugs.
Seeing as `git replace` is pretty mature by now (since 4228e8bc98
(replace: add --graft option, 2014-07-19) it can perform the graft
file's duties), it is time to deprecate support for the graft file, and
to retire it eventually.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The proof, as the saying goes, lies in the pudding. So here is a
regression test that not only demonstrates what the option is supposed to
accomplish, but also demonstrates that it does accomplish it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
replace: prepare create_graft() for converting graft files wholesale
When converting all grafts in a graft file to replace refs, and one of
them happens to leave the original commit's parents unchanged, we do not
want to error out. Instead, we would like to issue a warning.
Prepare the create_graft() function for such a use case by adding a
`gentle` parameter. If set, we do not return an error when the replace ref
is unchanged, but a mere warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
File this away as yet another patch in the "libification" category.
As with all useful functions, in the next commit we want to use
create_graft() from a higher-level function where it would be
inconvenient if the called function simply die()s: if there is a
problem, we want to let the user know how to proceed, and the callee
simply has no way of knowing what to say.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While working on the --convert-graft-file test, I missed that I was
relying on the GPG prereq, by using output of test cases that were only
run under that prereq.
For debugging, it was really convenient to force that prereq to be
unmet, but there was no easy way to do that. So I came up with a way,
and this patch reflects the cleaned-up version of that way.
For convenience, the following two methods are now supported ways to
pretend that a prereq is not met:
test_set_prereq !GPG
and
test_unset_prereq GPG
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: teach "add" to check out existing branches
Currently 'git worktree add <path>' creates a new branch named after the
basename of the path by default. If a branch with that name already
exists, the command refuses to do anything, unless the '--force' option
is given.
However we can do a little better than that, and check the branch out if
it is not checked out anywhere else. This will help users who just want
to check an existing branch out into a new worktree, and save a few
keystrokes.
As the current behaviour is to simply 'die()' when a branch with the name
of the basename of the path already exists, there are no backwards
compatibility worries here.
We will still 'die()' if the branch is checked out in another worktree,
unless the --force flag is passed.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out a dwim_branch function, which takes care of the dwim'ery in
'git worktree add <path>'. It's not too much code currently, but we're
adding a new kind of dwim in a subsequent patch, at which point it makes
more sense to have it as a separate function.
Factor it out now to reduce the patch noise in the next patch.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: improve message when creating a new worktree
Currently 'git worktree add' produces output like the following:
Preparing ../foo (identifier foo)
HEAD is now at 26da330922 <title>
The '../foo' is the path where the worktree is created, which the user
has just given on the command line. The identifier is an internal
implementation detail, which is not particularly relevant for the user
and indeed isn't mentioned explicitly anywhere in the man page.
Instead of this message, print a message that gives the user a bit more
detail of what exactly 'git worktree' is doing. There are various dwim
modes which perform some magic under the hood, which should be
helpful to users. Just from the output of the command it is not always
visible to users what exactly has happened.
Help the users a bit more by modifying the "Preparing ..." message and
adding some additional information of what 'git worktree add' did under
the hood, while not displaying the identifier anymore.
Currently there are several different cases:
- 'git worktree add -b ...' or 'git worktree add <path>', both of
which create a new branch, either through the user explicitly
requesting it, or through 'git worktree add' implicitly creating
it. This will end up with the following output:
Preparing worktree (new branch '<branch>')
HEAD is now at 26da330922 <title>
- 'git worktree add -B ...', which may either create a new branch if
the branch with the given name does not exist yet, or resets an
existing branch to the current HEAD, or the commit-ish given.
Depending on which action is taken, we'll end up with the following
output:
Preparing worktree (resetting branch '<branch>'; was at caa68db14)
HEAD is now at 26da330922 <title>
or:
Preparing worktree (new branch '<branch>')
HEAD is now at 26da330922 <title>
- 'git worktree add --detach' or 'git worktree add <path>
<commit-ish>', both of which create a new worktree with a detached
HEAD, for which we will print the following output:
- 'git worktree add <path> <local-branch>', which checks out the
branch and prints the following output:
Preparing worktree (checking out '<local-branch>')
HEAD is now at 47007d5 <title>
Additionally currently the "Preparing ..." line is printed to stderr,
while the "HEAD is now at ..." line is printed to stdout by 'git reset
--hard', which is used internally by 'git worktree add'. Fix this
inconsistency by printing the "Preparing ..." message to stdout as
well. As "Preparing ..." is not an error, stdout also seems like the
more appropriate output stream.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: remove extra members from struct add_opts
There are two members of 'struct add_opts', which are only used inside
the 'add()' function, but being part of 'struct add_opts' they are
needlessly also passed to the 'add_worktree' function.
Make them local to the 'add()' function to make it clearer where they
are used.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Declare that the *.py files in our tree are Python for the purposes of
diffing, and as in 00ddc9d13c ("Fix build with core.autocrlf=true",
2017-05-09) set eol=lf on them, which makes sense like with the *.perl
files.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the list of Perl extensions added in 00ddc9d13c ("Fix build
with core.autocrlf=true", 2017-05-09) to also include *.pl, we have
some of those in the tree, e.g. in t/.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: Let the callback of for_each_mergetag return on error
This is yet another patch to be filed under the keyword "libification".
There is one subtle change in behavior here, where a `git log` that has
been asked to show the mergetags would now stop reporting the mergetags
upon the first failure, whereas previously, it would have continued to the
next mergetag, if any.
In practice, that change should not matter, as it is 1) uncommon to
perform octopus merges using multiple tags as merge heads, and 2) when the
user asks to be shown those tags, they really should be there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a simple function that will interpret a string as a whitespace
delimited list of values, and add those values into the array.
Note: this function does not (yet) offer to split by arbitrary delimiters,
or keep empty values in case of runs of whitespace, or de-quote Unix shell
style. All fo this functionality can be added later, when and if needed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: introduce --rebase-merges=[no-]rebase-cousins
When running `git rebase --rebase-merges` non-interactively with an
ancestor of HEAD as <upstream> (or leaving the todo list unmodified),
we would ideally recreate the exact same commits as before the rebase.
However, if there are commits in the commit range <upstream>.. that do not
have <upstream> as direct ancestor (i.e. if `git log <upstream>..` would
show commits that are omitted by `git log --ancestry-path <upstream>..`),
this is currently not the case: we would turn them into commits that have
<upstream> as direct ancestor.
Let's illustrate that with a diagram:
C
/ \
A - B - E - F
\ /
D
Currently, after running `git rebase -i --rebase-merges B`, the new branch
structure would be (pay particular attention to the commit `D`):
--- C' --
/ \
A - B ------ E' - F'
\ /
D'
This is not really preserving the branch topology from before! The
reason is that the commit `D` does not have `B` as ancestor, and
therefore it gets rebased onto `B`.
This is unintuitive behavior. Even worse, when recreating branch
structure, most use cases would appear to want cousins *not* to be
rebased onto the new base commit. For example, Git for Windows (the
heaviest user of the Git garden shears, which served as the blueprint
for --rebase-merges) frequently merges branches from `next` early, and
these branches certainly do *not* want to be rebased. In the example
above, the desired outcome would look like this:
--- C' --
/ \
A - B ------ E' - F'
\ /
-- D' --
Let's introduce the term "cousins" for such commits ("D" in the
example), and let's not rebase them by default. For hypothetical
use cases where cousins *do* need to be rebased, `git rebase
--rebase=merges=rebase-cousins` needs to be used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>