* ep/shell-command-substitution:
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
git-tag.sh: use the $( ... ) construct for command substitution
git-revert.sh: use the $( ... ) construct for command substitution
git-resolve.sh: use the $( ... ) construct for command substitution
git-repack.sh: use the $( ... ) construct for command substitution
git-merge.sh: use the $( ... ) construct for command substitution
git-ls-remote.sh: use the $( ... ) construct for command substitution
git-fetch.sh: use the $( ... ) construct for command substitution
git-commit.sh: use the $( ... ) construct for command substitution
git-clone.sh: use the $( ... ) construct for command substitution
git-checkout.sh: use the $( ... ) construct for command substitution
install-webdoc.sh: use the $( ... ) construct for command substitution
howto-index.sh: use the $( ... ) construct for command substitution
* fc/remote-helper-fixes:
remote-bzr: trivial test fix
remote-bzr: include authors field in pushed commits
remote-bzr: add support for older versions
remote-hg: always normalize paths
remote-helpers: allow all tests running from any dir
t9362-mw-to-git-utf8.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9360-mw-to-git-clone.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-tag.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-revert.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-resolve.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-repack.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-merge.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-ls-remote.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-fetch.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-checkout.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
install-webdoc.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
howto-index.sh: use the $( ... ) construct for command substitution
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
sed -i 's@`\(.*\)`@$(\1)@g' ${_f}
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can help avoid -Wuninitialized false positives in
git_config_int and git_config_ulong, as the compiler now
knows that we do not return "ret" if we hit the error
codepath.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh seems to have a bug while redirecting the stderr of the 'read'
command:
% read foo 2>/dev/null <foo
zsh: no such file or directory: foo
Which causes errors to be displayed when certain files are missing.
Let's add a convenience function to manually check if the file is
readable before calling "read".
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since fd0a8c2e (first appearing in v1.7.0), the
t/t5560-http-backend-noserver.sh test has used a backslash escape
inside a ${} expansion in order to specify a literal '?' character.
Unfortunately the FreeBSD /bin/sh does not interpret this correctly.
In a POSIX compliant shell, the following:
x='one?two?three'
echo "${x#*\?}"
Would be expected to produce this:
two?three
When using the FreeBSD /bin/sh instead you get this:
one?two?three
In fact the FreeBSD /bin/sh treats the backslash as a literal
character to match so that this:
y='one\two\three'
echo "${y#*\?}"
Produces this unexpected value:
wo\three
In this case the backslash is not only treated literally, it also
fails to defeat the special meaning of the '?' character.
Instead, we can use the [...] construct to defeat the special meaning
of the '?' character and match it exactly in a way that works for the
FreeBSD /bin/sh as well as other POSIX /bin/sh implementations.
Changing the example like so:
x='one?two?three'
echo "${x#*[?]}"
Produces the expected output using the FreeBSD /bin/sh.
Therefore, change the use of \? to [?] in order to be compatible with
the FreeBSD /bin/sh which allows t/t5560-http-backend-noserver.sh to
pass on FreeBSD again.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 11502468 and 04c1ee57 (both first appearing in v1.8.5), the
t7001-mv test has used "cp -a" to perform a copy in several of the
tests.
However, the "-a" option is not required for a POSIX cp utility and
some platforms' cp utilities do not support it.
The POSIX equivalent of -a is -R -P -p.
Change "cp -a" to "cp -R -P -p" so that the t7001-mv test works
on systems with a cp utility that only implements the POSIX
required set of options and not the "-a" option.
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: fix completing args of aliased "push", "fetch", etc.
Some commands need the first word to determine the actual action that is
being executed, however, the command is wrong when we use an alias, for
example 'alias.p=push', if we try to complete 'git p origin ', the
result would be wrong because __git_complete_remote_or_refspec() doesn't
know where it came from.
So let's override words[1], so the alias 'p' is override by the actual
command, 'push'.
Reported-by: Aymeric Beaumet <aymeric.beaumet@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote-bzr: include authors field in pushed commits
Tests-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
remote-helpers: allow all tests running from any dir
Commit d3243d7 (test-bzr.sh, test-hg.sh: allow running from any dir)
allowed the tests to run from any directory, however, it didn't update
all the tests.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Merge branch 'cn/fetch-prune-overlapping-destination' into maint
* cn/fetch-prune-overlapping-destination:
fetch: handle overlaping refspecs on --prune
fetch: add a failing test for prunning with overlapping refspecs
Unicode 6.3 defines more code points as combining or accents. For
example, the character "ö" could be expressed as an "o" followed by
U+0308 COMBINING DIARESIS (aka umlaut, double-dot-above). We should
consider that such a sequence of two codepoints occupies one display
column for the alignment purposes, and for that, git_wcwidth()
should return 0 for them. Affected codepoints are:
Earlier unicode standards had defined these as "reserved".
Only the range 0..U+07FF has been checked to see which codepoints
need to be marked as 0-width while preparing for this commit; more
updates may be needed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bp/commit-p-editor:
run-command: mark run_hook_with_custom_index as deprecated
merge hook tests: fix and update tests
merge: fix GIT_EDITOR override for commit hook
commit: fix patch hunk editing with "commit -p -m"
test patch hunk editing with "commit -p -m"
merge hook tests: use 'test_must_fail' instead of '!'
merge hook tests: fix missing '&&' in test
Eradicate mistaken use of "nor" (that is, essentially "nor" used
not in "neither A nor B" ;-)) from in-code comments, command output
strings, and documentations.
* jl/nor-or-nand-and:
code and test: fix misuses of "nor"
comments: fix misuses of "nor"
contrib: fix misuses of "nor"
Documentation: fix misuses of "nor"
Make sure that the help text given to describe the "<param>" part
of the "git cmd --option=<param>" does not contain SP or _,
e.g. "--gpg-sign=<key-id>" option for "git commit" is not spelled
as "--gpg-sign=<key id>".
* jc/rev-parse-argh-dashed-multi-words:
parse-options: make sure argh string does not have SP or _
update-index: teach --cacheinfo a new syntax "mode,sha1,path"
parse-options: multi-word argh should use dash to separate words
git-p4: explicitly specify that HEAD is a revision
'git p4 rebase' fails with the following message if there is a file
named HEAD in the current directory:
fatal: ambiguous argument 'HEAD': both revision and filename
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
Take the suggestion above and explicitly state that HEAD should be
treated as a revision.
Signed-off-by: Vlad Dogaru <vdogaru@ixiacom.com> Acked-by: Pete Wyckoff <pw@padd.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: do not reuse packfiles without --delta-base-offset
When we are sending a packfile to a remote, we currently try
to reuse a whole chunk of packfile without bothering to look
at the individual objects. This can make things like initial
clones much lighter on the server, as we can just dump the
packfile bytes.
However, it's possible that the other side cannot read our
packfile verbatim. For example, we may have objects stored
as OFS_DELTA, but the client is an antique version of git
that only understands REF_DELTA. We negotiate this
capability over the fetch protocol. A normal pack-objects
run will convert OFS_DELTA into REF_DELTA on the fly, but
the "reuse pack" code path never even looks at the objects.
This patch disables packfile reuse if the other side is
missing any capabilities that we might have used in the
on-disk pack. Right now the only one is OFS_DELTA, but we
may need to expand in the future (e.g., if packv4 introduces
new object types).
We could be more thorough and only disable reuse in this
case when we actually have an OFS_DELTA to send, but:
1. We almost always will have one, since we prefer
OFS_DELTA to REF_DELTA when possible. So this case
would almost never come up.
2. Looking through the objects defeats the purpose of the
optimization, which is to do as little work as possible
to get the bytes to the remote.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pack-objects is computing the reachability bitmap to
serve a fetch request, it can erroneously die() if some of
the UNINTERESTING objects are not present. Upload-pack
throws away HAVE lines from the client for objects we do not
have, but we may have a tip object without all of its
ancestors (e.g., if the tip is no longer reachable and was
new enough to survive a `git prune`, but some of its
reachable objects did get pruned).
In the non-bitmap case, we do a revision walk with the HAVE
objects marked as UNINTERESTING. The revision walker
explicitly ignores errors in accessing UNINTERESTING commits
to handle this case (and we do not bother looking at
UNINTERESTING trees or blobs at all).
When we have bitmaps, however, the process is quite
different. The bitmap index for a pack-objects run is
calculated in two separate steps:
First, we perform an extensive walk from all the HAVEs to
find the full set of objects reachable from them. This walk
is usually optimized away because we are expected to hit an
object with a bitmap during the traversal, which allows us
to terminate early.
Secondly, we perform an extensive walk from all the WANTs,
which usually also terminates early because we hit a commit
with an existing bitmap.
Once we have the resulting bitmaps from the two walks, we
AND-NOT them together to obtain the resulting set of objects
we need to pack.
When we are walking the HAVE objects, the revision walker
does not know that we are walking it only to mark the
results as uninteresting. We strip out the UNINTERESTING flag,
because those objects _are_ interesting to us during the
first walk. We want to keep going to get a complete set of
reachable objects if we can.
We need some way to tell the revision walker that it's OK to
silently truncate the HAVE walk, just like it does for the
UNINTERESTING case. This patch introduces a new
`ignore_missing_links` flag to the `rev_info` struct, which
we set only for the HAVE walk.
It also adds tests to cover UNINTERESTING objects missing
from several positions: a missing blob, a missing tree, and
a missing parent commit. The missing blob already worked (as
we do not care about its contents at all), but the other two
cases caused us to die().
Note that there are a few cases we do not need to test:
1. We do not need to test a missing tree, with the blob
still present. Without the tree that refers to it, we
would not know that the blob is relevant to our walk.
2. We do not need to test a tip commit that is missing.
Upload-pack omits these for us (and in fact, we
complain even in the non-bitmap case if it fails to do
so).
Reported-by: Siddharth Agarwal <sid0@fb.com> Signed-off-by: Vicent Marti <tanoku@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'mh/remove-subtree-long-pathname-fix' into maint
* mh/remove-subtree-long-pathname-fix:
entry.c: fix possible buffer overflow in remove_subtree()
checkout_entry(): use the strbuf throughout the function
* jk/shallow-update-fix:
shallow: verify shallow file after taking lock
shallow: automatically clean up shallow tempfiles
shallow: use stat_validity to check for up-to-date file
* jn/wt-status:
wt-status: lift the artificual "at least 20 columns" floor
wt-status: i18n of section labels
wt-status: extract the code to compute width for labels
wt-status: make full label string to be subject to l10n
Protect refs in a hierarchy that can come from more than one remote
hierarcies from incorrect removal by "git fetch --prune".
* cn/fetch-prune-overlapping-destination:
fetch: handle overlaping refspecs on --prune
fetch: add a failing test for prunning with overlapping refspecs
* ep/shell-command-substitution:
git-am.sh: use the $(...) construct for command substitution
check-builtins.sh: use the $(...) construct for command substitution
Allow the options -i/--regexp-ignore-case, --pickaxe-regex, and -S
to be used together and work as expected to perform a pickaxe
search using case-insensitive regular expression matching.
* rs/pickaxe-i:
pickaxe: simplify kwset loop in contains()
pickaxe: call strlen only when necessary in diffcore_pickaxe_count()
pickaxe: move pickaxe() after pickaxe_match()
pickaxe: merge diffcore_pickaxe_grep() and diffcore_pickaxe_count() into diffcore_pickaxe()
pickaxe: honor -i when used with -S and --pickaxe-regex
t4209: use helper functions to test --author
t4209: use helper functions to test --grep
t4209: factor out helper function test_log_icase()
t4209: factor out helper function test_log()
t4209: set up expectations up front
Revert "submodule: explicit local branch creation in module_clone"
This reverts commit 23d25e48f5ead73c9ce233986f90791abec9f1e8, as it is
broken for users who haven't opted into the new feature of checking
out submodule.*.branch with update mode set to checkout.
update-ref: fail create operation over stdin if ref already exists
Signed-off-by: Aman Gupta <aman@tmm1.net> Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Brad King <brad.king@kitware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t4212 checks our behavior when we feed
gmtime a date so far in the future that it gives up and
returns NULL. Some implementations, like AIX, may actually
just provide us a bogus result instead.
It's not worth it for us to come up with heuristics that
guess whether the return value is sensible or not. On good
platforms where gmtime reports the problem to us with NULL,
we will print the epoch value. On bad platforms, we will
print garbage. But our test should be written for the
lowest common denominator so that it passes everywhere.
Reported-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most gmtime implementations return a NULL value when they
encounter an error (and this behavior is specified by ANSI C
and POSIX). FreeBSD's implementation, however, will simply
leave the "struct tm" untouched. Let's also recognize this
and convert it to a NULL (with this patch, t4212 should pass
on FreeBSD).
Reported-by: René Scharfe <l.s.r@web.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/tests-cleanup:
t0001: drop subshells just for "cd"
t0001: drop useless subshells
t0001: use test_must_fail
t0001: use test_config_global
t0001: use test_path_is_*
t0001: make symlink reinit test more careful
t: prefer "git config --file" to GIT_CONFIG
t: prefer "git config --file" to GIT_CONFIG with test_must_fail
t: stop using GIT_CONFIG to cross repo boundaries
t: drop useless sane_unset GIT_* calls
t/test-lib: drop redundant unset of GIT_CONFIG
t/Makefile: stop setting GIT_CONFIG
Teaches the "rev-parse --parseopt" mechanism used by scripted
Porcelains to parse command line options and give help text how to
supply argv-help (the placeholder string for an option parameter,
e.g. "key-id" in "--gpg-sign=<key-id>").
* ib/rev-parse-parseopt-argh:
t1502: protect runs of SPs used in the indentation
rev-parse --parseopt: option argument name hints
Improves the pattern to match the hunk-header for C/C++.
* js/userdiff-cc:
userdiff: have 'cpp' hunk header pattern catch more C++ anchor points
t4018: test cases showing that the cpp pattern misses many anchor points
t4018: test cases for the built-in cpp pattern
t4018: reduce test files for pattern compilation tests
t4018: convert custom pattern test to the new infrastructure
t4018: convert java pattern test to the new infrastructure
t4018: convert perl pattern tests to the new infrastructure
t4018: an infrastructure to test hunk headers
userdiff: support unsigned and long long suffixes of integer constants
userdiff: support C++ ->* and .* operators in the word regexp