Make git-recursive the default strategy for git-pull.
This does two things:
- It changes the hardcoded default merge strategy for two-head
git-pull from resolve to recursive.
- .git/config file acquires two configuration items.
pull.twohead names the strategy for two-head case, and
pull.octopus names the strategy for octopus merge.
IOW you are paranoid, you can have the following lines in your
.git/config file and keep using git-merge-resolve when pulling
one remote:
[pull]
twohead = resolve
OTOH, you can say this:
[pull]
twohead = resolve
twohead = recursive
to try quicker resolve first, and when it fails, fall back to
recursive.
git-apply: do not fail on binary diff when not applying nor checking.
We run git-apply with --stat and --summary at the end of the pull
by default, which causes it to barf when the pull brought in changes
to binary files. Just mark them as binary patch and proceed when
not applying nor checking.
[jc: I almost missed --check until I saw Linus did something similar.]
Allow failed tests to be ignored using make's "-i". The patch also
disables parallel make in t/. This doesn't make the testing any
different as before: the tests were run sequentially before.
It also allows to run more tests, ignoring the ones usually failing
just to figure out if something else broke. (Or to ignore plainly
uninteresting situations because of the testing being done on say...
cygwin ;)
As Pasky pointed out, building in templates directory showed
list of built template files which was unneeded. This commit
also fixes another build annoyance I recently left in by
accident.
Now that the leak is gone, there is by default no limit of revisions to
import. No more message about leak when the limit (given by the -l
parameter) is reached.
Signed-off-by: Yaacov Akiba Slama <ya@slamail.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
ls-files.c and read-tree.c miss the default configuration, in
particular the filemode=false part. The recent +x bit flip made me
notice that, because git-merge refused to merge anything saying that
git-pull.sh is not up to date.
merge-recursive: Only print relevant rename messages
It isn't really interesting to know about the renames that have
already been committed to the branch you are working on. Furthermore,
the 'git-apply --stat' at the end of git-(merge|pull) will tell us
about any renames in the other branch.
With this commit only renames which require a file-level merge will
be printed.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a companion patch to 13d1cc3604a1a64cb5a6025bba8af8b74a373963
commit, which made hierarchical branch name possible. "git tag
v0.99.9/a" would fail otherwise.
- older libexpat does not know about enum XML_Status
- as in my patch for http-fetch, do not rely on a curl result in
free()d data
- calloc the new_lock structure
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
A script that can replay commits git into a CVS checkout. Tries to ensure the
sanity of the operation and supports mainly manual usage.
If you are reckless enough, you can ask it to autocommit when everything has
applied cleanly. Combined with a couple more scripts could become part of
a git2cvs gateway.
Should support adds/removes and binary files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation: talk about guts of merge in tutorial.
While discussing Jon's ASCII art on merge operations with him, I
realized that the tutorial stops talking about the plumbing
details halfway. So fill in the gory details, and update the
examples to use 'git-merge', not 'git-resolve'.
Refactored merge options into separate merge-options.txt.
Refactored fetch options into separate fetch-options.txt.
Made git-merge use merge-options.
Made git-fetch use fetch-options.
Made git-pull use merge-options and fetch-options.
Added --help option to git-pull and git-format-patch scripts.
Rewrote Documentation/Makefile to dynamically determine
include dependencies.
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Set up remotes/origin to track all remote branches.
This implements the idea Daniel Barkalow came up with, to match
the remotes/origin created by clone by default to the workflow I
use myself in my guinea pig repository, to have me eat my own
dog food.
We probably would want to use either .git/refs/local/heads/*
(idea by Linus) or .git/refs/heads/origin/* instead to reduce
the local ref namespace pollution.
git-status: do not mark unmerged paths as committable.
An unmerged path appears as both "Updated but not checked in" list,
and "Changed but not updated" list. We are not going to commit that
path until it is resolved, so remove it from the former list.
ls-files: --others should not say unmerged paths are unknown.
Jon Loeliger noticed that an unmerged path appears as
"Untracked" in git-status output, even though we show the same
path as updated/changed. Since --others means "we have not told
git about that path", we should not show unmerged paths --
obviously, git knows about them; it just does not know what we
want to do about them yet.
There's no standard libexpat for OSX, so if you install it
after-market, it can end up in various directories. Give
paths used by fink and darwinports by default to CFLAGS.
The doc installation was flattened, breaking links to howto/.
Silly cut&paste error made git-doc depend on tk8.4. Doh.
Move most of the documentation (except manuals) to git-doc.
I think the original intention was to make CFLAGS overridable
from the make command line, but somehow we ended up accumulating
conditional makefile sections that wrongly appends values to
CFLAGs. These assignments do not work when the user actually
override them from the make command line!
DEFINES are handled the same way; it was seemingly overridable,
but the makefile sections had assignments, which meant
overriding it from the command line broke things.
This simplifies things by limiting the internal futzing to
ALL_CFLAGS, and by removing DEFINES altogether. Overriding
CFLAGS from the command line should start working with this
change.
git-fetch: fail if specified refspec does not match remote.
'git-fetch remote no-such-ref' succeeded without fetching any
ref from the remote. Detect such case and report an error.
Note that this makes 'git-fetch remote master master' to fail,
because the remote branch 'master' matches the first refspec,
and the second refspec is left unmatched, which is detected by
the error checking logic. This is somewhat unintuitive, but
giving the same refspec more than once to git-fetch is useless
in any case so it should not be much of a problem. I'd accept a
patch to change this if somebody cares enough, though.
Josef Weidendorfer points out that git-clone documentation does not
mention the initial copying of remote branch heads into corresponding
local branches. Also clarify the purpose of the ref mappings description
in the "remotes" file and recommended workflow.
We checked the result of patch application for full permission bits,
when the only thing we cared about was to make sure the executable
bit was correctly set.
If we let cpio to create the leading directories implicitly,
it ends up having funny perm bits (GNU cpio 2.5 and 2.6, at least).
This leaves .git/object/?? directories readable only by the owner.
We do not accept multiple <refspecs> on one Pull:/Push: line
right now (we could lift this tentative workaround for the
broken refnames), but we have always accepted multiple such
lines, so use that form in the examples and discussion.
Also explicitly mention that Octopus is made only with an
explicit command line request and never from Pull: lines.
Clarified and added notes for pull/push refspecs.
Converted to back-ticks for literal text examples.
[jc: Also fixed git-pull description that still talked about its
calling git-resolve or git-octopus (we do not anymore; instead
we just call git-merge). BTW, I am reasonably impressed by how
well "git-am -3" applied this patch, which had some conflicts
because I've updated the documentation somewhat.]
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Having the temporary files in the working tree root when making
tags is not as bad because it does not involve 'git status' as
the git-commit case, but this makes things more consistent.
Remove the temp file if it is empty after the request has failed
After using cg-update to pull, empty files named *.temp are left in
the various subdirectories of .git/objects/. These are created by
git-http-fetch to hold data as it's being fetched from the remote
repository. They are left behind after a transfer error so that the
next time git-http-fetch runs it can pick up where it left off. If
they're empty though, it would make more sense to delete them rather
than leaving them behind for the next attempt.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-merge expects this check to be done appropriately by the
merge strategy backends. In the case of merge-ours strategy,
the resulting tree comes what we have in the index file, so it
must match the current HEAD; otherwise it would not be "ours"
merge.
This adds the coolest merge strategy ever, "ours". It can take
arbitrary number of foreign heads and merge them into the
current branch, with the resulting tree always taken from our
branch head, hence its name.
What this means is that you can declare that the current branch
supersedes the development histories of other branches using
this merge strategy.
With --no-commit flag, git-pull will perform the merge but pretends as
if the merge needed a hand resolve even if automerge cleanly resolves,
to give the user a chance to add further changes and edit the commit
message.
One caller of deref_tag() was not careful enough to make sure
what deref_tag() returned was not NULL (i.e. we found a tag
object that points at an object we do not have). Fix it, and
warn about refs that point at such an incomplete tag where
needed.
For everyone cursed by dos/windows line endings (aka CRLF):
The code reading the .gitignore files (excludes and excludes per
directory) leaves \r in the patterns, which causes fnmatch to fail for
no obvious reason. Just remove a "\r" preceding a "\n"
unconditionally.
"git-checkout -b frotz/nitfol master" failed to create
$GIT_DIR/refs/heads/frotz/nitfol but went ahead and updated
$GIT_DIR/HEAD to point at it, resulting in a corrupt repository.
Exit when we cannot create the new branch with an error status.
While we are at it, there is no reason to forbid subdirectories
in refs/heads, so make sure we handle that correctly.
The newly cloned repository by default had .git/remotes/origin
set up to track the remote master to origin, but forgot to
create the origin branch ourselves. Also it hardcoded the
assumption that the remote HEAD points at "master", which may
not always be true.
-P:: <cvsps-output-file>
Instead of calling cvsps, read the provided cvsps output file. Useful
for debugging or when cvsps is being handled outside cvsimport.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>