Teach receive-pack not to pass non-existent refs to the post-receive and
post-update hooks. If the push only attempts to delete non-existent refs,
these hooks are not even called.
The update and pre-receive hooks are still notified about attempted
deletion of non-existent refs to give them a chance to inspect the
situation and act on it.
[jc: mild fix-ups to avoid introducing an extra list; also added fixes to
some tests]
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: Do not look at working tree during a virtual ancestor merge
Fix another instance of a recursive merge incorrectly paying attention to
the working tree file during a virtual ancestor merge, that resulted in
spurious and useless "addinfo_cache failed" error message.
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
t4014: clean up format.thread config after each test
The threading tests turn on format.thread, but never clean
up after themselves, meaning that later tests will also have
format.thread set.
This is more annoying than most leftover config, too,
because not only does it impact the results of other tests,
but it does so non-deterministically. Threading requires the
generation of message-ids, which incorporate the current
time, meaning a slow-running test script may generate
different results from run to run.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian Signed-off-by: Junio C Hamano <gitster@pobox.com>
1e5814f created t9160-git-svn-mergeinfo-push.sh on 11/9/7 40a1530 created t9160-git-svn-preserve-empty-dirs.sh on 11/7/20
The former test script is renumbered to t9161.
Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow git-svn to populate the svn:mergeinfo property automatically in
a narrow range of circumstances. Specifically, when dcommitting a
revision with multiple parents, all but (potentially) the first of
which have been committed to SVN in the same repository as the target
of the dcommit.
In this case, the merge info is the union of that given by each of the
parents, plus all changes introduced to the first parent by the other
parents.
In all other cases where a revision to be committed has multiple
parents, cause "git svn dcommit" to raise an error rather than
completing the commit and potentially losing history information in
the upstream SVN repository.
This behavior is disabled by default, and can be enabled by setting
the svn.pushmergeinfo config option.
[ew: minor style changes and manpage merge fix]
Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Bryan Jacobs <bjacobs@woti.com>
commit c9bfb953 (want_color: automatically fallback to color.ui,
2011-08-17) introduced a regression where format-patch produces colorized
patches when color.ui is set to "always".
In f3aafa4 (Disable color detection during format-patch, 2006-07-09),
git_format_config was taught to intercept diff.color to avoid passing it
down to git_log_config and later, git_diff_ui_config.
Teach git_format_config to intercept color.ui in the same way.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/remote-helpers-doc:
(short) documentation for the testgit remote helper
Documentation/git-remote-helpers: explain how import works with multiple refs
Documentation/remote-helpers: explain capabilities first
* jk/maint-config-param:
config: use strbuf_split_str instead of a temporary strbuf
strbuf: allow strbuf_split to work on non-strbufs
config: avoid segfault when parsing command-line config
config: die on error in command-line config
fix "git -c" parsing of values with equals signs
strbuf_split: add a max parameter
Removing Cogito leaves just git and StGit, which is a rather
incomplete list of git diff tools available. Sidestep the problem
of deciding what tools to mention by not mentioning any.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: skip on-demand checking when no submodules are configured
It makes no sense to do the - possibly very expensive - call to "rev-list
<new-ref-sha1> --not --all" in check_for_new_submodule_commits() when
there aren't any submodules configured.
Leave check_for_new_submodule_commits() early when no name <-> path
mappings for submodules are found in the configuration. To make that work
reading the configuration had to be moved further up in cmd_fetch(), as
doing that after the actual fetch of the superproject was too late.
Reported-by: Martin Fick <mfick@codeaurora.org> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A few more parts of this document is stale that needs updating
to reflect the reality, but I do not regularly rebase topics that
are only in "pu" anymore, which may be noteworthy for a commit.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
* tr/maint-format-patch-empty-output:
Document negated forms of format-patch --to --cc --add-headers
t4014: "no-add-headers" is actually called "no-add-header"
t4014: invoke format-patch with --stdout where intended
t4014: check for empty files from git format-patch --stdout
* fk/use-kwset-pickaxe-grep-f:
obstack: Fix portability issues
Use kwset in grep
Use kwset in pickaxe
Adapt the kwset code to Git
Add string search routines from GNU grep
Add obstack.[ch] from EGLIBC 2.10
* en/merge-recursive-2: (57 commits)
merge-recursive: Don't re-sort a list whose order we depend upon
merge-recursive: Fix virtual merge base for rename/rename(1to2)/add-dest
t6036: criss-cross + rename/rename(1to2)/add-dest + simple modify
merge-recursive: Avoid unnecessary file rewrites
t6022: Additional tests checking for unnecessary updates of files
merge-recursive: Fix spurious 'refusing to lose untracked file...' messages
t6022: Add testcase for spurious "refusing to lose untracked" messages
t3030: fix accidental success in symlink rename
merge-recursive: Fix working copy handling for rename/rename/add/add
merge-recursive: add handling for rename/rename/add-dest/add-dest
merge-recursive: Have conflict_rename_delete reuse modify/delete code
merge-recursive: Make modify/delete handling code reusable
merge-recursive: Consider modifications in rename/rename(2to1) conflicts
merge-recursive: Create function for merging with branchname:file markers
merge-recursive: Record more data needed for merging with dual renames
merge-recursive: Defer rename/rename(2to1) handling until process_entry
merge-recursive: Small cleanups for conflict_rename_rename_1to2
merge-recursive: Fix rename/rename(1to2) resolution for virtual merge base
merge-recursive: Introduce a merge_file convenience function
merge-recursive: Fix modify/delete resolution in the recursive case
...
(short) documentation for the testgit remote helper
While it's not a command meant to be used by actual users (hence, not
mentionned in git(1)), this command is a very precious help for
remote-helpers authors.
The best place for such technical doc is the source code, but users may
not find it without a link in a manpage.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Acked-by: Sverre Rabbelier <srabbelier@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: Teach dcommit --mergeinfo to handle multiple lines
"svn dcommit --mergeinfo" replaces the svn:mergeinfo property in an
upstream SVN repository with the given text. The svn:mergeinfo
property may contain commits originating on multiple branches,
separated by newlines.
Cause space characters in the mergeinfo to be replaced by newlines,
allowing a user to create history representing multiple branches being
merged into one.
Update the corresponding documentation and add a test for the new
functionality.
Signed-off-by: Bryan Jacobs <bjacobs@woti.com> Acked-by: Sam Vilain <sam@vilain.net> Acked-by: Eric Wong <normalperson@yhbt.net>
Adds a --preserve-empty-dirs flag to the clone operation that will detect
empty directories in the remote Subversion repository and create placeholder
files in the corresponding local Git directories. This allows "empty"
directories to exist in the history of a Git repository.
Also adds the --placeholder-file flag to control the name of any placeholder
files created. Default value is ".gitignore".
Signed-off-by: Ray Chen <rchen@cs.umd.edu> Acked-by: Eric Wong <normalperson@yhbt.net>
xdiff/xprepare: initialise xdlclassifier_t cf in xdl_prepare_env()
Ensure that the xdl_free_classifier() call on xdlclassifier_t cf is safe
even if xdl_init_classifier() isn't called. This may occur in the case
where diff is run with --histogram and a call to, say, xdl_prepare_ctx()
fails.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6030: use $SHELL_PATH to invoke user's preferred shell instead of bare sh
Some platforms (IRIX, Solaris) provide an ancient /bin/sh which chokes on
modern shell syntax like $(). SHELL_PATH is provided to allow the user to
specify a working sh, let's use it here.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
!"git ..." hopefully always succeeds because "git ..." is not the name
of any executable. However, that's not what was intended. Unquote
it, and while we're at it, also replace ! with test_must_fail since it
is a call to git.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Acked-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: clarify effects of -- <path> arguments
'git log -- <path>' does not "show commits that affect the specified
paths" in a literal sense unless --full-history is given (for example,
a file that only existed on a side branch will turn up no commits at
all!).
Reword it to specify the actual intent of the filtering, and point to
the "History Simplification" section.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/remote-helpers: explain capabilities first
The current remote helper documentation is from the perspective of
git, so to speak: it presents a full menu of commands for a person
invoking a remote helper to choose from. In practice, that's less
useful than it could be, since the daunted novice remote-helper author
probably just wanted a list of commands needs to implement to get
started. So preface the command list with an overview of each
capability, its purpose, and what commands it requires.
As a side effect, this makes it a little clearer that git doesn't
choose arbitrary commands to run, even if the remote helper advertises
all capabilities --- instead, there are well defined command sequences
for various tasks.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_grow(): maintain nul-termination even for new buffer
In the case where sb is initialized to the slopbuf (through
strbuf_init(sb,0) or STRBUF_INIT), strbuf_grow() loses the terminating
nul: it grows the buffer, but gives ALLOC_GROW a NULL source to avoid
it being freed. So ALLOC_GROW does not copy anything to the new
memory area.
This subtly broke the call to strbuf_getline in read_next_command()
[fast-import.c:1855], which goes
strbuf_detach(&command_buf, NULL); # command_buf is now = STRBUF_INIT
stdin_eof = strbuf_getline(&command_buf, stdin, '\n');
if (stdin_eof)
return EOF;
In strbuf_getwholeline, this did
strbuf_grow(sb, 0); # loses nul-termination
if (feof(fp))
return EOF;
strbuf_reset(sb); # this would have nul-terminated!
Valgrind found this because fast-import subsequently uses prefixcmp()
on command_buf.buf, which after the EOF exit contains only
uninitialized memory.
Arguably strbuf_getwholeline is also broken, in that it touches the
buffer before deciding whether to do any work. However, it seems more
futureproof to not let the strbuf API lose the nul-termination by its
own fault.
So make sure that strbuf_grow() puts in a nul even if it has nowhere
to copy it from. This makes strbuf_grow(sb, 0) a semantic no-op as
far as readers of the buffer are concerned.
Also remove the nul-termination added by strbuf_init, which is made
redudant.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document negated forms of format-patch --to --cc --add-headers
The negated forms introduced in c426003 (format-patch: add --no-cc,
--no-to, and --no-add-headers, 2010-03-07) were not documented
anywhere. Add them to the descriptions of the positive forms.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014: "no-add-headers" is actually called "no-add-header"
Since c426003 (format-patch: add --no-cc, --no-to, and
--no-add-headers, 2010-03-07) the tests have checked for an option
called --no-add-headers introduced by letting the user negate
--add-header.
However, the parseopt machinery does not automatically pluralize
anything, so it is in fact called --no-add-header.
Since the option never worked, is not documented anywhere, and
implementing an actual --no-add-headers would lead to silly code
complications, we just adapt the test to the code.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014: invoke format-patch with --stdout where intended
The test wrote something along the lines of 0001-foo.patch to output,
which of course never contained a signature. Luckily the tested
behaviour is actually present.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4014: check for empty files from git format-patch --stdout
Most kinds of failure in 'git format-patch --stdout >output' will
result in an empty 'output'. This slips past checks that only verify
absence of output, such as the '! grep ...' that are quite prevalent
in t4014.
Introduce a helper check_patch() that checks that at least From, Date
and Subject are present, thus making sure it looks vaguely like a
patch (or cover letter) email. Then insert calls to it in all tests
that do have positive checks for content.
This makes two of the tests fail. Mark them as such; they'll be
fixed in a moment.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert_to_git sets src=dst->buf if any of the preceding conversions
actually did any work. Thus in ident_to_git we have to use memmove
instead of memcpy as far as src->dst copying is concerned.
Signed-off-by: Thomas Rast <trast@student.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message given when the patch format was not recognized was
wrong, since the variable checked was $parse_patch rather than
$patch_format. Fix by checking the non-emptyness of the correct
variable.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
is too long ($x38 and $x40 represent 38 and 40 copies of [0-9a-f]) for
grep to handle. In order to still be able to match this, use the sed
invocation to replace what we're looking for with a token.
Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current explanation of -e can be misread as allowing the user to say
I know 'git clean -XYZ' (substitute -XYZ with any option and/or
parameter) will remove paths A, B, and C, and I want them all removed
except for paths matching this pattern by adding '-e C' to the same
command line, i.e. 'git clean -e C -XYZ'.
But that is not what this option does. It augments the set of ignore rules
from the command line, just like the same "-e <pattern>" argument does
with the "ls-files" command (the user could probably pass "-e \!C" to tell
the command to clean everything the command would normally remove, except
for C). Also error out when both -x and -e are given with an explanation of
what -e means---it is a symptom of misunderstanding what -e does.
It also fixes small style nit in the parameter to add_exclude() call. The
current code only works because EXC_CMDL happens to be defined as 0.
i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1, SunOS 5.10, and possibly
others do not have exit.h and exitfail.h. Remove the use of these in
obstack.c.
The __block variable was renamed to block to avoid a gcc error:
compat/obstack.h:190: error: __block attribute can be specified on variables only
Initial-patch-by: David Aguilar <davvid@gmail.com> Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com> Signed-off-by: Fredrik Kuivinen <frekui@gmail.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset